Micro-USB connectors meeting USB 2.0 Standard ZX Series d. e v r e s e R s ht Note: Contact us to ascertain whether a TID number has g Ri been acquired for an individual product. All Fig.1 D. T ■ Overview L Reverse O., Extremely small highly reliable connectors complying with Drop-in (Top mount) C physical, electrical and environmental requirements of (Mid-mount) C Micro-USB standard (USB 2.0). RI Receptacles and plugs are available in a wide variety of T mounting and termination styles, allowing their use in C E various applications. Standard L (Bottom mount) E E ■ Features S O 1. Size reduction R HI Compared with the standard Mini-USB connectors, the 6 size of ZX connectors is reduced by approximately 60% 1 while still allowing a high-speed data transfer of 480 Mbps, 0 2 specified in USB 2.0. ht g 2. Receptacle styles ri py Two interface configurations: Micro-B and Micro-AB in o standard, mid-mount and reverse mounting styles. C 6 SMT and through-hole (shell) PC board terminations. Fig.2 1 0 3. Plug styles 2 1. Corresponding to the receptacle styles, two interface USB 2.0 Hi-Speed (480 Mbps) r. configurations: Micro-A and Micro-B, with direct wire or p A PCB wire soldering. Eye diagram measurement results: Several plug styles can be used for data transmission, Measured with 2.4 m long USB 2.0 cable earphone or charging applications. 4. Smooth mating and unmating A smooth mating and unmating operation results in less v di wear and a longer product life. The unique Hirose active V/ latch mechanism produces a reliable and durable m TP2 connector. 0 0 Even after repeated use, the user will experience a 2 smooth click sensation when mating the connectors. Note: The statement above only applies when using both 500ps/div plug and receptacles made by Hirose Electric. Fig.3 5. Hirose was the first company to obtain a Micro-USB certification (TID number). 2014.8w 1

ZX Series● Micro-USB connectors meeting requirements of USB 2.0 Standard ■ Specifications 1 A (per contact) or Voltage rating 30 V AC Ratings Current rating 1.8 A (contacts No. 1 and 5) and Operating temperature range -30°C to +85 °C (Note1) 0.5 A (contacts No. 2, 3, and 4) Storage temperature range -30 °C to +60°C Item Specification Conditions 1. Contact resistance 30 mø max. 100 mA 2. Withstanding voltage No flashover or insulation breakdown 100 V AC / 1 minute 3. Capacitance 2 pF max. Between adjacent contacts at 1,000 Hz (AC voltage) 4. Durability Contact resistance: Rise from initial value of 10 mø max. 10,000 cycles 5. Total insertion/removal force Insertion force: 35 N max., Removal force: 8 N min. Mated with corresponding connector Note1: Includes temperature rise caused by current flow. ed. Note2: Information contained in this catalog represents general requirements for this Series. Contact us for the drawings and specifications v for a specific part number shown. r e es ■ Materials R hts ● Receptacles g Ri Part Material Finish Remarks All Insulator LCP Micro-B: Black, Micro-AB: Gray UL94V-0 D. Contacts Copper alloy Selective gold plated --------------- T L Shell Stainless steel Tin alloy plating --------------- O., C ● Plugs C RI Part Material Finish Remarks T C Insulator LCP Micro-B: Black, Micro-AB: Gray UL94V-0 E L Contacts Copper alloy Selective gold plated --------------- E E Shell Stainless steel Tin alloy plating --------------- S O R HI 6 ■ Ordering information 1 0 right 2 ● RZeXce p 6ta2cl e Rs D - B - 5 P * 8 qwSTeerrmieisn antaiomne style Z1200X''ss:: RStigrahitg-hatn, gPleC BP CwBir ewire, SMT y p 40's: Direct wire o q w e r t y u i C 60's: Right-angle, PCB wire 6 ● Plugs 80's: Cradle SMT 01 eBoard mounting style Blank Standard (Bottom mount) r.1.2 ZX 40 - B - 5 S * - UNIT ( Receptacles) RD SRteavnedraserd ( T(Boopt tmomou mnto)unt) through hole p q w r t y u o RD Reverse (Top mount) through hole A M Drop-in (Mid-mount) rMating side configuration A Micro-A ZX 40 - B - SLDA B Micro-B q w r o AB Micro-AB tNumber of contacts 5 yContact type P Receptacle- Male S Plug – Female uSerial No. iShell termination style – Blank SMT Interface Receptacle Plug Receptacles 8 Through hole (solder tab length: 0.8mm) oComponents-plugs UNIT Assembly (Insulator/contact/lock) Cover (Note 1) Micro-A Note 1: Classifiers such as A, B, and C are entered for *. Micro-B Micro-AB 2

ZX Series● Micro-USB connectors meeting requirements of USB 2.0 Standard ■ Configurations Mating side Type Part No. 3D Image Page configuration SMT ZX62-B-5PA(11) 4 Standard SMT + ZX62D-B-5PA8 4 DIP Micro-B Reverse SMT ZX62R-B-5P 5 d. s e v e er l Drop-in SMT ZX62M-B-5P(01) 5 s c e a R s pt ht e g SMT ZX62-AB-5PA(11) 6 Ri c All Re Standard D. SMT T + ZX62D-AB-5P8 6 L O., Micro-AB DIP C C SMT ZX62R-AB-5P 7 RI T C Reverse E SMT L E + ZX62RD-AB-5P8 7 E DIP S O Assembly R :ZX40-B-5S-UNIT(12) HI Direct wire soldering (insulator/contacts/lock) 9 and 10 6 Cover-top :ZX40-B-SLDA 1 Cover-bottom :ZX40-SLDB 0 2 ht PCB wire soldering (Ainsssuelmatbolry/contacts/lock) :ZX20-B-5S-UNIT 11 g (straight, through hole) ri Cover :ZX20-B-SLDC y p Micro-B o s Assembly C g PCB wire soldering (insulator/contacts/lock) :ZX64-B-5S-UNIT(14) 6 u (SMT) Cover-top :ZX64-B-SLDA 12 and 13 1 l 0 P Cover- bottom :ZX64-SLDB 2 pr.1. PCB wire soldering (Ainsssuelmatbolry/contacts/lock) :ZX64-B-5S-UNIT(14) 12 and 14 A (SMT) Cover :ZX64-B-SLDC Assembly :ZX40-A-5S-UNIT (insulator/contacts/lock) Micro-A Direct wire soldering 15 and 16 Cover-top :ZX40-A-SLDA Cover- bottom :ZX40-SLDB s ZX80-B-5S With lock 17 e SMT l d Micro-B + a r DIP C ZX80-B-5SA Without lock 17 Note: 1. Part numbers in the Plugs section of the above table list the Assembly (insulator/contacts/locks) and the corresponding Shields/Covers. Note: 2. Optional Printed Circuit boards for the Plugs are shown for reference only. Not supplied with applicable connectors. Note: 3. The color of the insulators body in the Assembly (insulator/contacts/lock) shown in the 3D Image column above is blue for clarity. Refer to the Materials (Page 2) for correct colors. 3

ZX Series● Micro-USB connectors meeting requirements of USB 2.0 Standard ■ Receptacles ● Micro B - Standard (Bottom mount), Shell SMT Part No. HRS No. Packaging ZX62-B-5PA(11) 242-0033-8 11 3,500 pcs/reel d. e v r e es BRecommended PCB mounting pattern R s 8.3 ht 4.1 g Ri 2.6 No.5 D. All NTROA CCOENSDUCTIVNEo .1 10..34 1.351.9 T 5 L 3 O., 1.6 3. 7.5 0.6 5 C C 0.5 45 TRI 46..32 PCB ED1.GE 2.5 2.8 EC 9.8 No.1 7.9 No.5 2.15 L E E ● All dimensions: mm S Micro B - Standard (Bottom mount), Shell through hole O R HI Part No. HRS No. Packaging 6 ZX62D-B-5PA8 242-0056-3 2,000 pcs/reel 1 0 2 ht g ri y p o C 6 1 0 2 1. r. p A BRecommended PCB mounting pattern 4.85 2.6 1.25(LAND) 0.85(TH)R0.50.225(0.1LAND) No0.1.06.54 10.N.061.35o55.((5LTAHN)D) R0.5(LAND) 5 9 3 2. R0.325(TH) 3. 7.5 0.6 5 NO CONDUCTIVE TRACESR 0.3(T H) 2.75 5 R00..352(T5(HT)H) 45..120.5 1.3 1.5(TH) 1.9 4.85 2.0.8 2.15 2.9 7.2 PCB EDGE No.1 7.2 No.5 9.4 All dimensions: mm 4

ZX Series● Micro-USB connectors meeting requirements of USB 2.0 Standard ■ Receptacles ● Micro B - Reverse (Top mount) Shell SMT Part No. HRS No. Packaging ZX62R-B-5P 242-0028-8 2,000 pcs/reel d. e v r e es BRecommended PCB mounting pattern R s 8.3 ht 4.1 g 2.6 Ri No.5 1.3 No.1 All 0.4 5 3 D. 1. 43 T 35 2 0. L 3. O., C C 1.9 0.5 45 No.5 No.1 0.6 5 RI 2.9 1. T 3.9 NO CONDUCTIVE TRACES 2.5 C 5.6 E L 6.6 7.5 2.15 E 9.8 8.8 E S O R ● All dimensions: mm HI Micro B - Drop-in (Mid-mount), Shell SMT 6 1 Part No. HRS No. Packaging 0 2 ZX62M-B-5P(01) 242-0024-7 01 1,500 pcs/reel ht g ri y p Co 11.5 6 7.5 1 0 2 1. r. p A BRecommended PCB mounting pattern 1.9 4.3 R0.4No.1 42.7 C0.3 7.5 1.23 No.5 4 4 4 7 5 1. 2. 2. 1. 7.15 5.15 1.05 3.6 4.3 0.6 5 1.25 5.3 9 1. 8 0.4 4 4. 2. 1.3 2.6 PCB EDGE No.1 No.5 6.9 0.25 7.8 1.3 8.8 2.6 12 4.7 All dimensions: mm 5

ZX Series● Micro-USB connectors meeting requirements of USB 2.0 Standard ■ Receptacles ● Micro AB - Standard (Bottom mount), Shell SMT Part No. HRS No. Packaging ZX62-AB-5PA(11) 242-0045-7 11 3,500 pcs/reel d. e v r e es BRecommended PCB mounting pattern R s 8.3 ht 4.1 g Ri 2.6 D. All No.1 1.3 0.4 No.51.35 LT 1.6 35 O., 3. 7.5 0.6 5 C RIC 4.30.5 1.45 1.9 2.5 2.8 T C 6.2 PCB EDGE LE 9.8 NO CONDUCTIVE TRACES No.1 8.8 No.5 2.15 E E OS ● Micro AB - Standard (Bottom mount), Shell through hole All dimensions: mm R HI Part No. HRS No. Packaging 6 1 ZX62D-AB-5P8 242-0027-5 2,000 pcs/reel 0 2 ht g ri y p o C 6 1 0 2 1. r. p A BRecommended PCB mounting pattern 4.45 2.6 D) 1.3 1.05(LAND) AN H) R0.45(LAND) 0.4 0.65(TH)NO CONDUCTIVE TRACES 1.25(L 0.85(T No.1 No.5 1.351.51.7 3.125 R0.3(TH) 3.475 7.5 0.6 5 R0.25(TH) 5 2 6 R0.5(LAND) 2. 2.5 2.8 PCB ED(0G.E325) 45..120.5 1.31.5(TH)1.9 4.45 0.6 2.025 3.125 (0.5) 7.35(TH) No.1 8.35 No.5 9(TH) All dimensions: mm 9.4 6

ZX Series● Micro-USB connectors meeting requirements of USB 2.0 Standard ■ Receptacles ● Micro AB - Reverse (Top mount), Shell SMT Part No. HRS No. Packaging ZX62R-AB-5P 242-0035-3 2,000 pcs/reel d. e v r e es BRecommended PCB mounting pattern R s 8.3 ht 4.1 g No.5 2.6 No.1 Ri NO CONDUCTIVE TRACES 1.3 All 35 0.4 6 D. 1. 1. T L 35 O., 3. C 43 7.5 LECTRIC 1.90.5 4260..7..96855 4-R0.41.45PC0.B EDGE No.5 8.8 N2.5o.1 02..615 5 E E 9.8 OS ● Micro AB - Reverse (Top mount), Shell through hole All dimensions: mm R HI Part No. HRS No. Packaging 6 1 ZX62RD-AB-5P8 242-0025-0 2,000 pcs/reel 0 2 ht g ri y p o C 6 1 0 2 1. r. p A BRecommended PCB mounting pattern 9.4 9(TH) R0.25(TH) 7.35(TH) R0.45(LAND) No.5 6.6 No.1 D) 4.45 R0.2MAX AN H) 2.6 1.05(LAND) 1.25(L 0.85(T 10..34 1.351.51.70.65(TH) 3.1250.555 3.475 No.5 7.5 No.1 0.6 5 R0.3(TH) (0.325) 2.5 NO CONDUCTIV(0E. 5T)RACES 42.7.95 0.85 1.3 1.5(TH) 1.9 2.625R0.5(LAND) 48..4355 0.6 A2ll. 0d2im5ensio3n.1s2: 5mm PCB EDGE 7

ZX Series● Micro-USB connectors meeting requirements of USB 2.0 Standard Plugs – assembled (not-terminated, without overmold) Components ZX40 - Direct wire soldering ZX40-*-SLDA Cover-top ZX40-*-5S-UNIT Assembly (insulator/ contacts/lock) *No PCB required ZX40-SLDB d. e Cover-bottom v r e s e R s ZX20 - PCB wire soldering ht g Ri All ZX20-*-SLDC D. Cover T L O., C C ZX20-*-5S-UNIT RI Assembly T (insulator/contacts/lock) C * Vertical through hole PCB E termination L E E S ZX64 - PCB wire soldering O R HI ZX64-*-SLDA 6 1 Cover-top 0 2 ht g ri ZX64-*-5S-UNIT y p o Assembly (insulator/ C contacts/lock) 6 * Right angle through hole 1 PCB termination 0 2 1. r. p ZX64-SLDB A Cover-bottom 8

ZX Series● Micro-USB connectors meeting requirements of USB 2.0 Standard ■ Plugs ● Micro B - Assembly (insulator/contacts/lock) – Direct wire soldering Part No. HRS No. Packaging ZX40-B-5S-UNIT(12) 242-0002-4 12 4,000 pcs/reel Contact HRS for Cable Termination Procedure Manual. d. e v er 4.1 s 1 e R s ht g Ri All D. T L O., No.5 7.9 No.1 C C RI 4.2 T C E L E E All dimensions: mm S O R ● Micro B - Component, Cover-top - Direct wire soldering HI 6 Part No. HRS No. Packaging 1 0 2 ZX40-B-SLDA 242-0003-7 4,000 pcs/reel ht g ri y p o C 6 1 0 2 1. r. p A 6 2. 2 6.85 8 8 1. All dimensions: mm 9

ZX Series● Micro-USB connectors meeting requirements of USB 2.0 Standard ■ Plugs ● Micro A, Micro B - Component, Cover-bottom - Direct wire soldering d. e v r e s e R s ht g Ri D. All 16.2 16.2 T L O., C C RI T C E L E E S O R HI 8 8 6 All dimensions: mm 1 0 2 ZX40-SLDB ZX40-SLDB(3.3) ht rig Part No. HRS No. Packaging Cable dia. y p ZX40-SLDB 242-0004-0 Ø3.8 o 4,000 pcs/reel C ZX40-SLDB(3.3) 242-0023-4 Ø3.3 6 1 ● 0 Assembled 2 1. r. p A 6 2. 2 6.85 8.6 4.75 1.8 All dimensions: mm 10

ZX Series● Micro-USB connectors meeting requirements of USB 2.0 Standard ■ Plugs ● Micro B - Assembly (insulator/contacts/lock) - Vertical through hole PCB wire soldering (non-direct) Part No. HRS No. Packaging ZX20-B-5S-UNIT 242-0012-8 00 4,000 pcs/pks Contact HRS for Cable Termination Procedure Manual. 2.6 1.3 5-0.15 4 11. d. e v PCB mounting pattern r e s *PCB required (not supplied) e Max. thickness: 0.6mm 2 s R ole) 12. ght gh h D. All Ri 0.6(Through Nhool.e1) 5-Ø1.1(Land) 5-Ø0.7(Throu 1N(Loa.5nd) T L O., 4.2 No.5 7.9 No.1 C e) 5 5 ELECTRIC 1.2(Through hol 0.3(Through hole) 12081....36225 1.55 R0.5(Land)1.6(Land) 3.975 0.3 1.5 E R S All dimensions: mm O ● R Micro B - Component, Cover - through hole HI 6 Part No. HRS No. Packaging 1 0 ZX20-B-SLDC 242-0022-1 4,000 pcs/reel 2 ht g 8.2 ri opy 2-0.2 1.1 C 6 1 0 2 1. 1 pr. 12. A ● Assembled 8.2 2.6 2-0.2 1.3 5-0.15 4 11. 6.85 8 8 12.2 1. 0.6 6.85 Assembly (insulator/contacts/lock) Cover 8.4 55 8 35 1. 0.1. 4 4. All dimensions: mm 6 0. 11

ZX Series● Micro-USB connectors meeting requirements of USB 2.0 Standard ■ Plugs ● Micro B - Assembly (insulator/contacts/lock) - Right angle SMT Part No. HRS No. Packaging ZX64-B-5S-UNIT(14) 242-0009-3 14 1 piece Contact HRS for Cable Termination Procedure Manual. 2.6 1.3 5-0.15 d. e v r e s e 1 R 6. s 1 ht PCB mounting pattern g Ri *PCB required (not supplied) All Max. thickness: 1.0mm D. T L O., 6 C 1.5 7.9 C No.5 No.1 TRI 0.35 0.5 1.1 C 1.3 7 LE No.5 2.6 No.1 3. E 6.8 E S O R All dimensions: mm HI 6 ● 1 Micro B - Component, Cover-top – Right angle SMT 0 2 ht Part No. HRS No. Packaging g ri ZX64-B-SLDA 242-0013-0 4,000 pcs/reel y p o C 6 1 0 2 1. r. p A 7 4. 2 6.85 8 8 1. All dimensions: mm 12

ZX Series● Micro-USB connectors meeting requirements of USB 2.0 Standard ■ Plugs ● Micro B - Component, Cover-bottom - Right angle SMT Part No. HRS No. Packaging ZX64-SLDB 242-0049-8 4,000 pcs/reel 5 2 8. 1 d. e v r e s e ● R Assembled s ht g Ri All D. 4.7 T 2 8 L O., C C RI T C 6.85 Assembly LE 8.4 (insulator/contacts/lock) Cover-top E E OS 4.1 1.8 R Cover-bottom HI All dimensions: mm 6 ● 1 Micro B - Component, Shell/cover – Right angle SMT 0 2 ht Part No. HRS No. Packaging g ri ZX64-B-SLDC 242-0018-4 4,000 pcs/reel y p o C 6 1 0 2 1. r. p A 6.85 Shell/cover, without cable clamp This shell/cover does not require ZX64-SLDB. ● 8 16.1 Assembled 8 1. 1 6. 1 6.85 Assembly (insulator/contacts/lock) Cover-top 8.4 1 8 4. 1. Cover-bottom All dimensions: mm 13

ZX Series● Micro-USB connectors meeting requirements of USB 2.0 Standard ■ Plugs ● Micro A - Assembly (insulator/contacts/lock) - Direct wire soldering Part No. HRS No. Packaging ZX40-A-5S-UNIT 242-0010-2 1 piece Contact HRS for Cable Termination Procedure Manual. d. 4 e 2. v 1 r e s e R s ht g Ri All Contacts D. T L No.5 7.9 No.1 O., C C 4.2 RI T C E L Insulator body (color grey) E E S O All dimensions: mm R ● HI Micro A - Component, Cover-top - Direct wire soldering 6 1 Part No. HRS No. Packaging 0 2 ht ZX40-A-SLDA 242-0011-5 4,000 pcs/reel g ri y p o C 6 1 0 2 1. r. p A 6 2. 2 6.85 8 8 1. All dimensions: mm 14

ZX Series● Micro-USB connectors meeting requirements of USB 2.0 Standard ■ Plugs ● Micro A, Micro B - Component, Cover-bottom - Direct wire soldering d. e v r e s e R s ht g Ri D. All 16.2 16.2 T L O., C C RI T C E L E E S O R HI 8 8 6 1 All dimensions: mm 0 2 ZX40-SLDB ZX40-SLDB(3.3) ht rig Part No. HRS No. Packaging Cable dia. y p ZX40-SLDB 242-0004-0 Ø3.8 o 4,000 pcs/reel C ZX40-SLDB(3.3) 242-0023-4 Ø3.3 6 1 ● 0 Assembled 2 1. r. p A 6 2. 2 6.85 Assembly Cover-top (insulator/contacts/lock) 8.6 5 7 8 4. 1. Cover-bottom All dimensions: mm 15

ZX Series● Micro-USB connectors meeting requirements of USB 2.0 Standard ■ Plug-Vertical, cradle mount, Shell through hole ● Micro B, with lock 6.65 2-0.2 6.85 8.55 2.6 1.3 ved. 2.782.421.88 No.5 5-N0o.1.15 11.86 ser 3.15 e 7 R 0. hts 3.522.320.37 R1.6 1260..5555 13 7.12.5 1.15 g Ri D. All Part No. HRS No. Packaging All dimensions: mm T ZX80-B-5S 242-0017-1 100 pcs/pks L O., ● Micro B, without lock C C RI 6.65 2-0.2 T C E L E E S O R HI 6 6.85 1 8.55 0 2 ht 21..63 pyrig 2.782.421.88 No.5 5-N0o.1.15 11.86 o 5 C 3.1 16 227 R 2.5 0.7 20 3.52.30.3 1.6 16.55 7.1 1. 20.55 13 1.15 r. p A Part No. HRS No. Packaging ZX80-B-5SA 242-0019-7 100 pcs/pks B PCB mounting pattern e) ol h h g 72-Ø2.2(Hole) 8-R0.25 01..51((TLahnrodu)gh hole)1.3(Throu 1.9(Land) 3 0. 5 1 9 3. 2. 6 2.2 8-R 0.55 01..34 01..51((TLahnrodu)gh hole) h hole) Land) 1.8 Contact No.1 2.6 Contact No.5 oug 2.2( 6.65 hr 16.55 6(T 1. All dimensions: mm 16

ZX Series● Micro-USB connectors meeting requirements of USB 2.0 Standard B Packaging Specifications ● ● Embossed carrier tape dimensions Reel Dimensions C Unreeling direction D 4 0.5 E 5 75 2 Ø1. 1. Ø13 Unreeling direction Ø380 B A d. e v r e s e R s ht g Ri All Part No. D dimension E dimension D. ZX62-B-5PA(11) 30.4 24.4 T Part No. A dimension B dimension ZX62-AB-5PA(11) 30.4 24.4 L ZX62-B-5PA(11) 24 11.5 ZX62M-B-5P(01) 30.4 24.4 O., ZX62-AB-5PA(11) 24 11.5 Other 22.4 16.4 C ZX62M-B-5P(01) 24 11.5 C RI Other 16 7.5 T C E B Recommended Temperature Profile - Receptacles L E E ● Using lead-free solder paste S The temperature profile is based on the left O conditions. R HI (ç) In individual applications the actual temperature 6 may vary, depending on solder paste type, volume/ 201 250 223400çç min tshoicldkenre psass aten da nbdo aerqdu sipizmee/tnhtic mknaensusfa. cCtounretar cfot ry our ht specific recommendations. rig 200 180ç y Note 1: Up to 2 cycles of Reflow soldering are p o 150 150ç possible under the same conditions, C provided that there is a return to normal 6 temperature between the first and second 1 100 0 cycle. 2 60S 30S Note 2: The temperature profile indicates the board r.1. 50 surface temperature at the point of contacts p with the connector terminals. A B Precautions 1. Exercise care when handling the connectors. Do not subject them to excessive external forces when mating/un-mating. 2. Mate and un-mate as intended, holding by the overmolded body, in the correct direction. Do not un-mate by pulling on the cable. 3. Some tooling marks may be visible on the surfaces of receptacle (shell/cover). No form/fit or function is affected. 4. Appearance of the surface finishes on the receptacles may vary between production runs. No affect on form, fit or function. 17

ZX Series● Micro-USB connectors meeting requirements of USB 2.0 Standard MEMO : d. e v r e s e R s ht g Ri All D. T L O., C C RI T C E L E E S O R HI 6 1 0 2 ht g ri y p o C 6 1 0 2 1. r. p A 18

ZX Series● Micro-USB connectors meeting requirements of USB 2.0 Standard d. e v r e s e R s ht g Ri All D. T L O., C C RI T C E L E E S O R HI 6 1 0 2 ht g ri y p o C 6 1 0 2 1. r. p A 19

ZX Series● Micro-USB connectors meeting requirements of USB 2.0 Standard USA: USA: USA: HIROSE ELECTRIC (U.S.A.), INC. Headquarters HIROSE ELECTRIC (U.S.A.), INC. San Jose Office HIROSE ELECTRIC (U.S.A.), INC. Detroit Office (Automotive) 2688 Westhills Court, Simi Valley, CA 93065-6235 3255 Scott Boulevard, Building 7, Suite 101 37677 Professional Center Drive, Suite #100C Phone : +1-805-522-7958 Santa Clara, CA 95054 Livonia, MI 48154 Fax : +1-805-522-3217 Phone : +1-408-253-9640 Phone : +1-734-542-9963 http://www.hiroseusa.com Fax : +1-408-253-9641 Fax : +1-734-542-9964 http://www.hiroseusa.com http://www.hiroseusa.com THE NETHERLANDS: GERMANY: GERMANY: HIROSE ELECTRIC EUROPE B.V. HIROSE ELECTRIC EUROPE B.V. German Branch HIROSE ELECTRIC EUROPE B.V. Nuernberg Office Hogehillweg #8 1101 CC Amsterdam Z-O Herzog-Carl-Strasse 4 D-73760 Ostfildern Muggenhofer Str. 136 90429 Nuernberg Phone : +31-20-6557460 (Scharnhauser Park) Phone : +49-911 32 68 89 63 Fax : +31-20-6557469 Phone : +49-711-4560-02-1 Fax : +49-911 32 68 89 69 http://www.hiroseeurope.com Fax : +49-711-4560-02-299 http://www.hirose.de d. e http://www.hirose.de v r e s UNITED KINGDOM: CHINA: CHINA: e R Hirose Electric Europe BV (UK Branch) HIROSE ELECTRIC (SHANGHAI) CO., LTD. HIROSE ELECTRIC (SHANGHAI) CO.,LTD. BEIJING BRANCH hts 4 Newton Court, Kelvin Drive, Knowlhill, 1601, Henderson Metropolitan, NO.300, East Nanjing A1001, Ocean International Center, Building 56# East 4th g Milton Keynes, MK5 8NH Road, Huangpu District, Shanghai, China 200001 Ring Middle Road, ChaoYang District, Beijing, 100025 Ri All PFahxo n: e+ 4: 4+-4149-0189 0280 2200528050 PFahxo n: e+ 8: 6+-8261--2613-9613-9313-3353 55 PFahxo n: e+ 8: 6+-8160--1509-0581-6153-891332 D. http://www.hirose-china.com.cn http://www.hirose-china.com.cn T L O., CHINA: HONG KONG: TAIWAN: C HIROSE ELECTRIC TECHNOLOGIES (SHENZHEN) CO., LTD. HIROSE ELECTRIC HONGKONG TRADING CO., LTD. HIROSE ELECTRIC TAIWAN CO., LTD. C Room 09-13, 19/F, Office Tower Shun Hing Square, Di Wang Commercial Centre, Room 1001, West Wing, Tsim Sha Tsui Centre, 66 103 8F, No.87, Zhengzhou Rd., Taipei RI 5002 Shen Nan Dong Road, Shenzhen City, Guangdong Province, 518008 Mody Road, Tsim Sha Tsui East, Kowloon, Hong Kong Phone : +886-2-2555-7377 T C Phone : +86-755-8207-0851 Phone : +852-2803-5338 Fax : +886-2-2555-7350 E L Fax : +86-755-8207-0873 Fax : +852-2591-6560 http://www.hirose-taiwan.com.tw E http://www.hirose-china.com.cn http://www.hirose-hongkong.com.hk E S O KOREA: SINGAPORE: INDIA: R HI HIROSE KOREA CO., LTD. HIROSE ELECTRIC SINGAPORE PTE. LTD. HIROSE ELECTRIC SINGAPORE PTE. LTD Delhi Liaison Office 6 1261-10, Jeoungwhang-Dong, Shihung-City, 10 Anson Road #26-1, International Plaza Suite No. 606 5th Floor SB Tower 1A/1 Sector 1 0 Kyunggi-Do 429-450 079903, Singapore 16 A Filmcity Noida 201301 Uttar Pradesh-India 2 ht Phone : +82-31-496-7000,7124 Phone : +65-6324-6113 Phone : +91-120-4804917 g Fax : +82-31-496-7100 Fax : +65-6324-6123 Fax : +91-120-4804949 yri http://www.hirose.co.kr http://www.hirose-singapore.com.sg http://www.hirose.com/sg/ p o C 6 INDIA: MALAYSIA: 1 HIROSE ELECTRIC SINGAPORE PTE. LTD. Bangalore Liaison office HIROSE ELECTRIC SINGAPORE PTE. LTD (Representative office) 0 2 Unit No.03, Ground Floor, Explorer Building International Tech 1-10-07, Suntech @ Penang Cybercity (1164),Lintang 1. Park Whitefield Road, Bangalore 560066 Karnataka, India Mayang Pasir 3,11950, Bayan Baru, Penang, Malaysia. r. p Phone : +91-80-4120 1907 Phone : +604-619-2564 A Fax : +91-80-4120 9908 Fax : +604-619-2574 http://www.hirose-singapore.com.sg http://www.hirose.com/sg/ ® 2-6-3,Nakagawa Chuoh,Tsuzuki-Ku,Yokohama-Shi 224-8540,JAPAN TEL: +81-45-620-3526 Fax: +81-45-591-3726 http://www.hirose.com http://www.hirose-connectors.com The characteristics and the specifications contained herein are for reference purpose. Please refer to the latest customer drawings prior to use. 20 The contents of this catalog are current as of date of 08/2014. Contents are subject to change without notice for the purpose of improvements. Powered by TCPDF (www.tcpdf.org)