ZMY3V9 to ZMY100 www.vishay.com Vishay Semiconductors Zener Diodes FEATURES • Silicon planar power Zener diodes • For use in stablilizing and clipping circuits with high power rating • The Zener voltages are graded according to the international E 24 standard. Smaller voltag e tolerances are available upon request • These diodes are also available in the DO-41 DESIGN SUPPORT TOOLS AVAILABLE case with the type designation ZPY3V9 to ZPY100 3DD 33D • AEC-Q101 qualified 3D Models • Material categorization: for definitions of complianc e please see www.vishay.com/doc?99912 PRIMARY CHARACTERISTICS PARAMETER VALUE UNIT V range nom. 3.9 to 100 V Z Test current I 5 to 100 mA ZT V specification Pulse current Z Circuit configuration Single ORDERING INFORMATION DEVICE NAME ORDERING CODE TAPED UNITS PER REEL MINIMUM ORDER QUANTITY ZMY3V9 to ZMY100 ZMY3V9 to ZMY100-series-GS18 5 000 (12 mm tape on 13" reel) 10 000/box ZMY3V9 to ZMY100 ZMY3V9 to ZMY100-series-GS08 1 500 (12 mm tape on 7" reel) 12 000/box PACKAGE MOLDING COMPOUND MOISTURE SENSITIVITY PACKAGE NAME WEIGHT SOLDERING CONDITIONS FLAMMABILITY RATING LEVEL MSL level 1 MELF (DO-213AB) glass 135 mg UL 94 V-0 Peak temperature max. 260 °C (according J-STD-020) ABSOLUTE MAXIMUM RATINGS (T = 25 °C, unless otherwise specified) amb PARAMETER TEST CONDITION SYMBOL VALUE UNIT Valid provided that electrodes are kept at Power dissipation P 1000 mW ambient temperature tot Zener current See table “Characteristics” Valid provided that electrodes are kept at Junction to ambient air R 170 K/W ambient temperature thJA Junction to ambient case R 60 K/W thJC Junction temperature, maximum Tj 175 °C Storage temperature range Tstg -55 to +175 °C Rev. 2.0, 12-Mar-2019 1 Document Number: 85788 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

ZMY3V9 to ZMY100 www.vishay.com Vishay Semiconductors ELECTRICAL CHARACTERISTICS (T = 25 °C, unless otherwise specified) amb DYNAMIC ADMISSIBLE TEMPERATURE ZENER VOLTAGE TEST REVERSE RESISTANCE ZENER COEFFICIENT OF RANGE (2) CURRENT VOLTAGE f = 1 kHz CURRENT (1) ZENER VOLTAGE PART NUMBER VZ at IZT1 IZT1 VR at IR ZZ at IZT1 IZ VZ at IZT1 V mA V μA  mA 10-4/°C MIN. NOM. MAX. MAX. TYP. MIN. MAX. ZMY3V9 3.7 3.9 4.1 100 - 0.5 7 4 203 - 7 2 ZMY4V3 4 4.3 4.6 100 - 0.5 7 4 182 - 7 3 ZMY4V7 4.4 4.7 5 100 - 0.5 7 4 165 - 7 4 ZMY5V1 4.8 5.1 5.4 100 0.7 0.5 5 2 150 - 6 5 ZMY5V6 5.2 5.6 6 100 1.5 0.5 2 1 135 - 3 5 ZMY6V2 5.8 6.2 6.6 100 2 0.5 2 1 128 - 1 6 ZMY6V8 6.4 6.8 7.2 100 3 0.5 2 1 110 0 7 ZMY7V5 7 7.5 7.9 100 5 0.5 2 1 100 0 7 ZMY8V2 7.7 8.2 8.7 100 6 0.5 2 1 89 3 8 ZMY9V1 8.5 9.1 9.6 50 7 0.5 4 2 82 3 8 ZMY10 9.4 10 10.6 50 7.5 0.5 4 2 74 5 9 ZMY11 10.4 11 11.6 50 8.5 0.5 7 3 66 5 10 ZMY12 11.4 12 12.7 50 9 0.5 7 3 60 5 10 ZMY13 12.4 13 14.1 50 10 0.5 9 4 55 5 10 ZMY15 13.8 15 15.8 50 11 0.5 9 4 49 5 10 ZMY16 15.3 16 17.1 25 12 0.5 10 5 44 7 11 ZMY18 16.8 18 19.1 25 14 0.5 11 5 40 7 11 ZMY20 18.8 20 21.2 25 15 0.5 12 6 36 7 11 ZMY22 20.8 22 23.3 25 17 0.5 13 7 34 7 11 ZMY24 22.8 24 25.6 25 18 0.5 14 8 29 7 12 ZMY27 25.1 27 28.9 25 20 0.5 15 9 27 7 12 ZMY30 28 30 32 25 22.5 0.5 20 10 25 7 12 ZMY33 31 33 35 25 25 0.5 20 11 22 7 12 ZMY36 34 36 38 10 27 0.5 60 25 20 7 12 ZMY39 37 39 41 10 29 0.5 60 30 18 8 12 ZMY43 40 43 46 10 32 0.5 80 35 17 8 13 ZMY47 44 47 50 10 35 0.5 80 40 15 8 13 ZMY51 48 51 54 10 38 0.5 100 45 14 8 13 ZMY56 52 56 60 10 42 0.5 100 50 13 8 13 ZMY62 58 62 66 10 47 0.5 130 60 11 8 13 ZMY68 64 68 72 10 51 0.5 130 65 10 8 13 ZMY75 70 75 79 10 56 0.5 160 70 9 8 13 ZMY82 77 82 88 10 61 0.5 160 80 8 8 13 ZMY91 85 91 96 5 68 0.5 250 120 7.5 9 13 ZMY100 94 100 106 5 75 0.5 250 130 7 9 13 Notes (1) Valid provided that electrodes are kept at ambient temperature (2) Tested with pulses t = 5 ms p Rev. 2.0, 12-Mar-2019 2 Document Number: 85788 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

ZMY3V9 to ZMY100 www.vishay.com Vishay Semiconductors BASIC CHARACTERISTICS (T = 25 °C, unless otherwise specified) amb Ω W ZMY... ZMY... 103 1.0 5 4 3 0.8 r 2 P zj 102 ZMY5.1 tot ZMY4.3 0.6 5 4 ZMY18 3 ZMY12 2 0.4 10 5 4 0.2 3 ZMY6.2 2 ZMY10 ZMY7.5 1 0 1 2 3 4 5 7 10 2 3 4 5 7100 mA 0 100 200 °C 18312 I 19969 T Z amb Fig. 1 - Dynamic Resistance vs. Zener Current Fig. 4 - Admissible Power Dissipation vs. Ambient Temperature Ω100 ZMY... °C/W103 ZMY... 7 5 4 5 3 4 2 rzj 3 rthA 102 2 ZMY43 5 0.5 4 10 ZMY36 3 7 ZMY30 2 0.2 45 ZZMMYY2242 10 0.1 23 ZMY18 435 00.0.025 tP v = _tT_P_ PI 2 T 1 1 0.01 V = 0 1 2 3 4 5 10 2 3 4 5 100 mA 10-5 10-4 10-3 10-2 10-1 1 10 s 18313 I 18286 t Z P Fig. 2 - Dynamic Resistance vs. Zener Current Fig. 5 - Pulse Thermal Resistance vs. Pulse Duration Ω mA 103 ZMY... 240 ZMY... 7 ZMY3.9 ZMY4.7 Tj = 25 °C 5 4 200 ZMY5.6 rzj 23 IZ 160 ZMY6.8 1027 ZZMMYY18020 120 1Te0s0t mCAurrent lZ ZMY8Z.M2Y10 ZMY68 45 ZMY56 80 ZMY12 3 ZMY43 50 mA 2 40 10 0 0.1 2 3 4 5 1 2 3 4 5 10 mA 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 V 18314 I 18309 V Z Z Fig. 3 - Dynamic Resistance vs. Zener Current Fig. 6 - Breakdown Characteristics Rev. 2.0, 12-Mar-2019 3 Document Number: 85788 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

ZMY3V9 to ZMY100 www.vishay.com Vishay Semiconductors mA mA ZMY... ZMY... 60 20 ZMY15 ZMY18 Tj = 25 °C ZMY56 Tj = 25 °C ZMY22 50 I I Z 40 ZMY27 Z ZMY68 Test Current l 10 mA Z ZMY82 30 T2e5s tm CAurrent lZ ZMY33 10 ZMY100 ZMY39 20 ZMY47 5 mA 10 mA 10 0 0 0 5 10 15 20 25 30 35 40 45 50 V 0 50 100 150 200 V 18310 VZ 18311 VZ Fig. 7 - Breakdown Characteristics Fig. 8 - Breakdown Characteristics PACKAGE DIMENSIONS in millimeters (inches): MELF DO-213AB (glass) 2.6 (0.102) Cathode identification 2.4 (0.094) 0.55 (0.022) 5.2 (0.205) 4.8 (0.189) The gap between plug and glass can be either on cathode or anode side Foot print recommendation: 1.25 (0.049) 4.00 (0.157) min. max. 8) 1 0 (0.1 min. 0 3. 6.50 (0.256) 18317 ref. Rev. 2.0, 12-Mar-2019 4 Document Number: 85788 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROV E RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose o r the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustainin g applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk . Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this documen t or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2019 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 01-Jan-2019 1 Document Number: 91000

Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: V ishay: ZMY10-GS08 ZMY100-GS08 ZMY11-GS08 ZMY12-GS08 ZMY13-GS08 ZMY15-GS08 ZMY16-GS08 ZMY18- GS08 ZMY20-GS08 ZMY22-GS08 ZMY24-GS08 ZMY27-GS08 ZMY3V9-GS08 ZMY30-GS08 ZMY33-GS08 ZMY36-GS08 ZMY39-GS08 ZMY4V3-GS08 ZMY4V7-GS08 ZMY43-GS08 ZMY47-GS08 ZMY5V1-GS08 ZMY5V6- GS08 ZMY51-GS08 ZMY56-GS08 ZMY6V2-GS08 ZMY6V8-GS08 ZMY62-GS08 ZMY68-GS08 ZMY7V5-GS08 ZMY75-GS08 ZMY8V2-GS08 ZMY82-GS08 ZMY9V1-GS08 ZMY91-GS08 ZMY10-GS18 ZMY100-GS18 ZMY11- GS18 ZMY12-GS18 ZMY13-GS18 ZMY15-GS18 ZMY16-GS18 ZMY18-GS18 ZMY20-GS18 ZMY22-GS18 ZMY24-GS18 ZMY27-GS18 ZMY3V9-GS18 ZMY30-GS18 ZMY33-GS18 ZMY36-GS18 ZMY39-GS18 ZMY4V3- GS18 ZMY4V7-GS18 ZMY43-GS18 ZMY47-GS18 ZMY5V1-GS18 ZMY5V6-GS18 ZMY51-GS18 ZMY56-GS18 ZMY6V2-GS18 ZMY6V8-GS18 ZMY62-GS18 ZMY68-GS18 ZMY7V5-GS18 ZMY75-GS18 ZMY8V2-GS18 ZMY82- GS18 ZMY9V1-GS18 ZMY91-GS18