C L D - D PRODUCT FAMILY DATA SHEET S 5 2 R E V 3 J Cree® XLamp® XQ-D LED PRODUCT DESCRIPTION FEATURES TABLE OF CONTENTS Cree XLamp® XQ-D LEDs revolutionize • Cree’s smallest lighting class LED: Characteristics .......................................2 low-cost, high-power LEDs by delivering 1.6 X 1.6 X 1.6 mm Flux Characteristics ...............................3 lighting-class reliability and a wider • Available in white, 80-minimum CRI Relative Spectral Power Distribution ....4 spread of light than typical plastic white, and 70-minimum CRI cool Relative Flux vs. Junction packages. The XQ-D’s innovative white Temperature ...........................................4 wide light emission can improve the • Binned at 25 °C Electrical Characteristics .......................5 omnidirectionality of replacement lamps, • 700 mA maximum drive current Relative Flux vs. Current ........................5 while also reducing system cost by using • Low thermal resistance: 7.5 °C/W Typical Spatial Distribution ....................6 fewer LEDs. • Wide viewing angle: 145° Thermal Design ......................................6 • Reflow solderable - JEDEC Reflow Soldering Characteristics ..........7 Using Cree’s newest generation of J-STD-020C compatible Notes ......................................................8 silicon carbide-based LED chips, XQ-D is • Unlimited floor life at ≤ 30 °C/85% RH Mechanical Dimensions ......................10 optimized to dramatically lower system • RoHS and REACh compliant Tape and Reel .......................................11 cost in replacement lamp, non-directional • UL® recognized component Packaging .............................................12 and outdoor area lighting applications. (E349212) P M A L X / M O C E. E R C W. W W Copyright © 2013-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and Cree, Inc. XLamp® are registered trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300

XLAMP® XQ-D LED CHARACTERISTICS Characteristics Unit Minimum Typical Maximum Thermal resistance, junction to solder point °C/W 7.5 Viewing angle (FWHM) degrees 145 Temperature coefficient of voltage mV/°C -3 ESD classification (HBM per Mil-Std-883D) Class 1 DC forward current mA 350 700 Reverse voltage V -5 Forward voltage (@ 350 mA, 25 °C) V 3.1 3.5 LED junction temperature °C 150 Copyright © 2013-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 22

XLAMP® XQ-D LED FLUX CHARACTERISTICS (T = 25 °C) J The following table provides several base order codes for XLamp XQ-D LEDs. It is important to note that the base order codes listed here are a subset of the total available order codes for the product family. For more order codes, as well as a complete description of the order- code nomenclature, please consult the XLamp XQ LED Family Binning and Labeling document. Calculated Minimum Luminous Flux Minimum CCT Range @ 350 mA Luminous Flux Color Order Code (lm)* Min. Max. Group Flux (lm) 700 mA R4 130 227 XQDAWT-00-0000-00000LG51 Cool White 5000 K 8300 K R3 122 213 XQDAWT-00-0000-00000LF51 R2 114 199 XQDAWT-00-0000-00000LE51 R4 130 227 XQDAWT-00-0000-00000BG51 70 CRI Minimum 5000 K 8300 K R3 122 213 XQDAWT-00-0000-00000BF51 Cool White R2 114 199 XQDAWT-00-0000-00000BE51 R3 122 213 XQDAWT-00-0000-00000BFE5 Neutral White 3700 K 5000 K R2 114 199 XQDAWT-00-0000-00000BEE5 Q5 107 187 XQDAWT-00-0000-00000LDE5 Q4 100 172 XQDAWT-00-0000-00000HCE7 80 CRI Minimum 2600 K 4300 K Q3 93.9 164 XQDAWT-00-0000-00000HBE7 White Q2 87.4 153 XQDAWT-00-0000-00000HAE7 Q4 100 172 XQDAWT-00-0000-00000LCE7 Warm White 2600 K 3700 K Q3 93.9 164 XQDAWT-00-0000-00000LBE7 Q2 87.4 153 XQDAWT-00-0000-00000LAE7 Notes: • Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI measurements. See the Measurements section (page 8). • Typical CRI for Neutral White, 3700 K - 5000K CCT is 75. • Typical CRI for Warm White, 2600 K - 3700 K CCT is 80. • Minimum CRI for 70 CRI Minimum Cool White is 70. • Minimum CRI for 80 CRI Minimum White is 80. * Calculated flux values at 700 mA are for reference only. Copyright © 2013-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 3

XLAMP® XQ-D LED Relative Spectral Power RELATIVE SPECTRAL POWER DISTRIBUTION 100% 80% ) % ( r e w o P 60% Cool White nt a Neutral White di a Warm White R 40% e v ti a el R 20% 0% 380 430 480 530 580 630 680 730 780 Wavelength (nm) Relative Flux Output vs. Junction Temperature RELATIVE FLUX VS. JUNCTION TEMPERATURE (I  = 350 mA) F 120% 100% x u Fl s 80% u o n mi 60% u L e v ati 40% el R 20% 0% 25 50 75 100 125 150 Junction Temperature (ºC) Copyright © 2013-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 44

XLAMP® XQ-D LED ELEECleTcRtriIcCaAl CLh CarHacAteRriAstCicTs E(TRj I=S 8T5IºCCS) (T = 25 °C) J 700 600 A) 500 m ( nt 400 e r r u C d 300 r a w or 200 F 100 0 2.5 2.6 2.7 2.8 2.9 3.0 3.1 3.2 3.3 Relative Intensity vs. Current (Tj = 85ºC) Forward Voltage (V) RELATIVE FLUX VS. CURRENT (T = 25 °C) J 180% 160% %) 140% ( x u 120% Fl s u 100% o n mi 80% u L e 60% v ti a el 40% R 20% 0% 0 100 200 300 400 500 600 700 Forward Current (mA) Copyright © 2013-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 55

XLAMP® XQ-D LED Typical Spatial Radiation Pattern TYPICAL SPATIAL DISTRIBUTION 100% 90% %) 80% y ( 70% sit en 60% nt s I 50% u o min 40% u L 30% e v ati 20% el R 10% 0% -90 -70 -50 -30 -10 10 30 50 70 90 Angle (º) THERMAL DESIGN ThTe mhaexirmmuma folr wDared scuirgrennt is determined by the thermal resistance between the LED junction and ambient. It is crucial for the end product to be designed in a manner that minimizes the thermal resistance from the solder point to ambient in order to optimize lamp life and optical characteristics. 800 700 600 ) A m nt ( 500 e r ur 400 C m u 300 m Rj-a = 10°C/W xi a M 200 Rj-a = 15°C/W Rj-a = 20°C/W 100 Rj-a = 25°C/W 0 0 20 40 60 80 100 120 140 160 Ambient Temperature (ºC) Copyright © 2013-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 66

XLAMP® XQ-D LED REFLOW SOLDERING CHARACTERISTICS In testing, Cree has found XLamp XQ-D LEDs to be compatible with JEDEC J-STD-020C, using the parameters listed below. As a general guideline, Cree recommends that users follow the recommended soldering profile provided by the manufacturer of the solder paste used, and therefore it is the lamp or luminaire manufacturer’s responsibility to determine applicable soldering requirements. Note that this general guideline may not apply to all PCB designs and configurations of reflow soldering equipment. t T P Critical Zone P T to T L P Ramp-up T ure L Tsmax tS t a r e p Ts m min e T ts Ramp-down Preheat 25 t 25˚C to Peak Time IPC/JEDEC J-STD-020C Profile Feature Lead-Free Solder Average Ramp-Up Rate (Ts to Tp) 1.2 °C/second max Preheat: Temperature Min (Ts ) 120 °C min Preheat: Temperature Max (Ts ) 170 °C max Preheat: Time (ts to ts ) 65-150 seconds min max Time Maintained Above: Temperature (T) 217 °C L Time Maintained Above: Time (t) 45-90 seconds L Peak/Classification Temperature (Tp) 235 - 245 °C Time Within 5 °C of Actual Peak Temperature (tp) 20-40 seconds Ramp-Down Rate 1 - 6 °C/second Time 25 °C to Peak Temperature 4 minutes max. Note: All temperatures refer to topside of the package, measured on the package body surface. Copyright © 2013-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 77

XLAMP® XQ-D LED NOTES Measurements The luminous flux, radiant power, chromaticity, forward voltage and CRI measurements in this document are binning specifications only and solely represent product measurements as of the date of shipment. These measurements will change over time based on a number of factors that are not within Cree’s control and are not intended or provided as operational specifications for the products. Calculated values are provided for informational purposes only and are not intended or provided as specifications. Pre‑Release Qualification Testing Please read the LED Reliability Overview for details of the qualification process Cree applies to ensure long-term reliability for XLamp LEDs and details of Cree’s pre-release qualification testing for XLamp LEDs. Lumen Maintenance Cree now uses standardized IES LM-80-08 and TM-21-11 methods for collecting long-term data and extrapolating LED lumen maintenance. For information on the specific LM-80 data sets available for this LED, refer to the public LM-80 results document. Please read the Long-Term Lumen Maintenance application note for more details on Cree’s lumen maintenance testing and forecasting. Please read the Thermal Management application note for details on how thermal design, ambient temperature, and drive current affect the LED junction temperature. Moisture Sensitivity Cree recommends keeping XLamp LEDs in the provided, resealable moisture-barrier packaging (MBP) until immediately prior to soldering. Unopened MBPs that contain XLamp LEDs do not need special storage for moisture sensitivity. Once the MBP is opened, XLamp XQ-D LEDs may be stored as MSL 1 per JEDEC J-STD-033, meaning they have unlimited floor life in conditions of ≤ 30 ºC/85% relative humidity (RH). Regardless of storage condition, Cree recommends sealing any unsoldered LEDs in the original MBP. RoHS Compliance The levels of RoHS restricted materials in this product are below the maximum concentration values (also referred to as the threshold limits) permitted for such substances, or are used in an exempted application, in accordance with EU Directive 2011/65/EC (RoHS2), as implemented January 2, 2013. RoHS Declarations for this product can be obtained from your Cree representative or from the Product Ecology section of the Cree website. REACh Compliance REACh substances of very high concern (SVHCs) information is available for this product. Since the European Chemical Agency (ECHA) has published notice of their intent to frequently revise the SVHC listing for the foreseeable future, please contact a Cree representative to insure you get the most up-to-date REACh SVHC Declaration. REACh banned substance information (REACh Article 67) is also available upon request. Copyright © 2013-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 88

XLAMP® XQ-D LED NOTES - CONTINUED UL® Recognized Component This product meets the requirements to be considered a UL Recognized Component with Level 1 enclosure consideration. The LED package or a portion thereof has not been investigated as a fire enclosure or a fire and electrical enclosure per ANSI/UL 8750. Vision Advisory WARNING: Do not look at an exposed lamp in operation. Eye injury can result. For more information about LEDs and eye safety, please refer to the LED Eye Safety application note. Copyright © 2013-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 9

XLAMP® XQ-D LED 6 66 5 55 4 44 3 33 2 22 1 11 NOMTICEECNNOOHTTICICAEENICAL DIMENSIONS REVISONSRREEVVISISOONNSS CCORENET ACINOCCENCCORDFOREN IENWDETETE AICT ANICNOHITNOENIINEANDF DLFA IWD. IR WDTEIETEHNIT HNITTSHITHIN AIPINEA LAL L.PAOR .TRR ETTHOE HIATS PITHNS RHPED PILEE PTLO TPORHTAROET RAO PAIYNNPRN DAFRIDE ONITE TTDRHTAHMEARE ARIY NTIY NAFI OAFONONNDRDRMMAATTIOIONN REV RREVEV DESCRIPTIODNDESECSCRIRPITPITOIONN BY DABTYBEY ADPPDA'TADET E APAPP'PD'D CONFIDECNCOTONIANFLFID IIDNEEFNNOTTIRAIMALL AI NTINFIOFOONR RMOMFAA TCTIORIOENNE O ,O FINF CC CR. RETEHEE,I S,I N IPNCLC.O .T TTH HISIS P PLLOOTT UMNAAYU NTOHTUMO UMBNRANAEAYIZAY U CENU TNODOTHO PTHPOTI OEEBR BRDREIZES, I CZE ROACEODENOD PPlP P lIPRWEE IEEORdDIRDTSD, iHS,ROU mROOENCEUPN E PeRT WD RTW On IHOOTDITEHsRDUH O UWCiDOUoCEIRUSTEDInCTT TD T HOLT sHOOEERE RN S WiD E WnDCIRDSIOR IS CTTmINCTLTOSLTOE EOEAmNSNNSNE CTE YDC.OD OTN TONSOS EA ENANNNTYTY OF CREEO OIFNF CC C.RREEEE I NINCC.. Measurement tolerances unless indicated otherwise: ±.13 mm D DD 1.60 11.6.600 1.60 1.60 .375 .375 .600 .6.60000 .600 .6.60000 D DD .600 .600.600 .600 R.936 R.936 NOTCHN NIOSO TOTCCNHH I SIS O ONN CATHOCDCAEAT T(H-H)O OSDIDDEEE ( -()- )S SIDIDEE NOTCH IS ONNOTCH IS ON CATHODE(-)C SAITDHEODE(-) SIDE 1.60 11.6.600 1.41 11.4.411 1.500 11.5.50000 1.60 1.60 1.500 1.500 C CC C CC 1.60± .0115.6.600±±.0.055 .300 .3.30000 Top View Side View Bottom1 V.5i8e w±.08 1.58 ±.08 .300 .300 1.500 11.5.50000 1.500 1.500 .300 .3.30000 .300 .300 .65 .6.655 .30 .3.300 SOLDESRSO OPLALDDDEERR P PAADD B BB REFERRERENEFCFEEERREENNCCEE B BB .65 .65 SOLDER PASDOLDER PAD 1.60 11.6.600 3.300 33.3.30000 .30 .30 REFERENCEREFERENCE 1.60 11.6.600 1.60 1.60 3.300 3.300 RECOMRRMEEECCNOODMMEMDME EPNNCDD EBEDOD AP PRCCD B BSOOOAALRRDDDE SR SO OPLALDDDEERR P PAADD A AA RE1C.6O0MRRMEEECCNO3ODM.3MEM0D1M0E .ET6NNR30D3.DA3E.3CE0D00DE 0T LTRARAYACOCEUE LT LAAYYOOUUTT THIRD ANTGTHLHIERI RDPD RA OANNJGEGLCELTE PI OPRNROOJEJECMTCUFTILOONTILOLLRIIEMOEN DRSESNIHAMTSNEE EOECRNM..XTTXXETSMSUFI°H LOXX TMIOUUNA FIEOL XLOL ONNENLRIR LNE M L E TDLLR ID±W RSES±M ESEAE± DI RHAASIMTESSLSASINFHAEE MT SSREEPOTNECERE NEE A ..XOSETS.TEC..XXERS5 NS21R°..XPHRIT PTXX XXE SN52MISUA T°EH°EO E XXX 5 F M I SUNENA CR EO CN XI TNNENDL IR ±W OINS ±F FAE TIDL± ±W SNISA±II LSAEAESE± H FAL ISRDLSAEPDSYT.F SRE: A EP SETS... 5 E21R A PSRIEPS...N525 21RTEMPCADR°I EP5NF 52SPHRTCAE° CDE5IF PEAT SNCIOCI.RFIECWF NIIOCORISNIKFINFEIEIVHSRNILA IDE--BDEEYL--H.LOYDD:DY.N:IMCADNPHRAMCADDPEATPHRAD.RECWP EATCOR.KRECWN IVCORRKA NDDD--BEIVL--RAO AAA5YD--BEL--TTT/OYND2EEE--N3I--N/I1N2 DDDAAA5DDDTTTT/AAA5I2TEEETTT/--L32EEE--E/--31--/212 TITTILTELEXQx OXUXQTQxLx IO NOU4PDFE6haUu0oxrhT0 n(a e9TSm 1Li(l99,ic L)1NoI 93.nCIN)1 D33 N2-1r4PDF57iE3v6hau574PDF-e0oxEr5056hauh0 n8330(oxra e9h00S nm( 1a0 ei9(Sl99m,i 1c i()1Nl99o ,i93c ).1nNCo )19 3 .nD33 C)12 - 1rD335 7i32vA-157r5-7ei3505v57-8e335050833000 AA RReEcCoOmMmMEeNnRDdEEeCDdO PMPCMC BEBON AsDRoEDDld SPeOCrL pBDOaEAdRR PDA SDOLDER PAD ...XXXX°XX X ± ± ± ± ...X...1XXX527°...X.XX XXX 555 °° X XX X ± ± ± ±± ± ± ± ...1527 ....15555F27°.IN555°AL PROTECTIVFEIN FF-AIINNL-AI SPLHR PORTOETCETCIVTEIV FE-I NF--IISN-HISHSIZECSISZIEZECDRCAWING N2O.6DRD1ARWA0WIN-IGN0 GN2 O0N2.O60.6121060-0-000002266REAV. RERAVEA.V. SU3R.F3AC0E 0FSINUSIURSRFHAF: CACE1. E6F IFN3INISI.HS3H: :0 1.106.6 -- ---- SCALE45.00S0CSACLAELE454.50.00000 SHEET OSFHSEHEETET1/1OFOF 11/1/1 6 66 5 55 4 44 3 33 2 22 1 11 RECOMMREeNcRDoEECmDO mTMReMAnECdNEeD LdEA DYt rOTaRUcATeC lEa LyAoYuOtUT Copyright © 2013-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 1100

6 5 4 3 2 1 NOTICE REVISONS CCORENET ACINOENDF IWDEITNHTIINA LA.R TEH ITSH PEL PORTO APNRDIE TTHAER IYN AFONDRMATION REV DESCRIPTION BY DATE APP'D CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY UNAUTHORIZED PERSON WITHOUTT HE WRITTEN CONSENT OF CREE INC. XLAMP® XQ-D LED D D TAPE AND REEL All Cree carrier tapes conform to EIA-481D, Automated Component Handling Systems Standard. Except as noted, all dimensions in mm. Measurement tolerances unless indicated otherwise: .xx = ±.25 mm, .xxx = ±.125 mm C C 1.500 +4.1.00±.1 1.5±.1 4.000 -.00 1.75±.10 CATHODE SIDE 8.0±.1 2.5±.1 1.750 A Cathode Side 1.65 8.000 NOMINAL +.3 8.30 12.0 .0 MAX 1.85 1.000 A 3.50 ±.10 .30 ± .10 2.000 ANODE SIDE Anode Side B (denoted by + and circle) B User Feed Direction END START REFERENCE VENDOR PART NUMBER 021142 Loaded Pockets Trailer Leader (2,000 Lamps) 160 mm (min) of 400 mm (min) of UNLESS OTHERWISE SPECIFIED DRAWN BY DATE A seemalepdty w pitohc ktaeptse MTILOLLIEMDREIAMTNEECRN.XESSX IUAO NN N DL S±E ASAFSRT E SE. 2PRIN5E F CINIFISIEHD.: CAPHDPE.RC COKVREODNINemaDDtpAA5 TT/3EElt1ey/1a2 psto 1ck0e0t ms wmith 4PDF6hau0oxrh0 n(a e9Sm 1i(l99,ic )1No 93.nC)1 D33 2-1r57i3v57-e50583300 A (20 pockets min.) .XXX ± .125 sealed TbITLyE tape Notes: THIRD ANGLE PROJECTION FOR SHEEXT° M E T±AL PA .5RT°S ONLY MATERIA(L50 empty pockeCtasr rmierin T.)ape, 1.7X1.7 XPQ 1. 10 sprocket hole pitch cumulative tolerance ± 0.2mm .X ± 1.5 ..XXXXX ± ± ..2755 FINAL PROTECTIVE FINISH SIZE C DRAWING N2O.402-00023 REAV. X° ± .5° USURsFeACrE FFINeISeH:d 1 .6Direction SCALE4.000 SHEET OF 1/1 6 5 4 3 2 1 Cover Tape Pocket Tape 13mm 7" Copyright © 2013-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 1111

XLAMP® XQ-D LED PACKAGING The diagrams below show the packaging and labels Cree uses to ship XLamp XQ-D LEDs. XLamp XQ-D LEDs are shipped in tape loaded on a reel. Each box contains only one reel in a moisture barrier bag. Unpackaged Reel Vacuum-Sealed MVaocuisutmu-rSee aBleadrrier Bag Moisture Barrier Bag CLRaEbEe Bli nw Ciotdhe Cree Bin &C oBadreco,d Qe Ltayb, eLlot # Label with Cree Bin Code, Quantity, Reel ID LLaabbeel wl iwthi tChu sCtormeeer Bin CP/oNd, Qet,y ,Q Lotyt ,# , LPoOt # # Packaged Reel Patent Label LLaabbeel lw iwthi tChus tComreere O Orderrd er Code, Code, Qty, Reel ID, PO # Quantity, Reel ID, PO # Label with Cree Bin Code, Quantity, Reel ID Boxed Reel Label with Cree Order Code, Quantity, Reel ID, PO # Label with Cree Bin Code, Quantity, Reel ID Patent Label (on bottom of box) Copyright © 2013-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 1122