XC7SH86 2-input EXCLUSIVE-OR gate Rev. 01 — 7 September 2009 Product data sheet 1. General description XC7SH86 is a high-speed Si-gate CMOS device. It provides a 2-input EXCLUSIVE-OR function. 2. Features n Symmetrical output impedance n High noise immunity n ESD protection: u HBM JESD22-A114E: exceeds 2000V u MM JESD22-A115-A: exceeds 200 V u CDMJESD22-C101C: exceeds 1000V n Low power dissipation n Balanced propagation delays n SOT353-1 and SOT753 package options n Specified from-40 (cid:176)C to+125 (cid:176)C 3. Ordering information Table 1. Ordering information Type number Package Temperature range Name Description Version XC7SH86GW -40 (cid:176)C to +125 (cid:176)C TSSOP5 plastic thin shrink small outline package; 5leads; SOT353-1 body width1.25mm XC7SH86GV -40 (cid:176)C to +125 (cid:176)C SC-74A plastic surface-mounted package; 5 leads SOT753

XC7SH86 Nexperia 2-input EXCLUSIVE-OR gate 4. Marking Table 2. Marking codes Type number Marking code[1] XC7SH86GW fH XC7SH86GV f86 [1] The pin 1 indicator is located on the lower left corner of the device, below the marking code. 5. Functional diagram B 1 Y A 4 1 = 1 2 4 2 mna038 mna039 Fig 1. Logic symbol Fig 2. IEC logic symbol B Y A mna040 Fig 3. Logic diagram 6. Pinning information 6.1 Pinning XC7SH86 B 1 5 VCC A 2 GND 3 4 Y 001aak133 Fig 4. Pin configuration SOT353-1 and SOT753 XC7SH86_1 © Nexperia B.V. 2017. All rights reserved Product data sheet Rev. 01 — 7 September 2009 2 of 11

XC7SH86 Nexperia 2-input EXCLUSIVE-OR gate 6.2 Pin description Table 3. Pin description Symbol Pin Description B 1 data input A 2 data input GND 3 ground (0 V) Y 4 data output V 5 supply voltage CC 7. Functional description Table 4. Function table H=HIGH voltage level; L = LOW voltage level Inputs Output A B Y L L L L H H H L H H H L 8. Limiting values Table 5. Limiting values In accordance with the Absolute Maximum Rating System (IEC 60134). Voltages are referenced to GND (ground = 0 V). Symbol Parameter Conditions Min Max Unit V supply voltage - 0.5 +7.0 V CC V input voltage - 0.5 +7.0 V I I input clamping current V <-0.5 V - 20 - mA IK I I output clamping current V <-0.5V or V >V +0.5V [1] - –20 mA OK O O CC I output current -0.5 V < V <V +0.5V - –25 mA O O CC I supply current - 75 mA CC I ground current - 75 - mA GND T storage temperature - 65 +150 (cid:176)C stg P total power dissipation T =-40 (cid:176)Cto+125 (cid:176)C [2] - 250 mW tot amb [1] The input and output voltage ratings may be exceeded if the input and output current ratings are observed. [2] For both TSSOP5 and SC-74A packages: above 87.5(cid:176)C the value of P derates linearly with 4.0mW/K. tot XC7SH86_1 © Nexperia B.V. 2017. All rights reserved Product data sheet Rev. 01 — 7 September 2009 3 of 11

XC7SH86 Nexperia 2-input EXCLUSIVE-OR gate 9. Recommended operating conditions Table 6. Recommended operating conditions Voltages are referenced to GND (ground = 0 V). Symbol Parameter Conditions Min Typ Max Unit V supply voltage 2.0 5.0 5.5 V CC V input voltage 0 - 5.5 V I V output voltage 0 - V V O CC T ambient temperature -40 +25 +125 (cid:176) C amb Dt/DV input transition rise and fall rate V = 3.3 V– 0.3 V - - 100 ns/V CC V = 5.0 V– 0.5 V - - 20 ns/V CC 10. Static characteristics Table 7. Static characteristics Voltages are referenced to GND (ground = 0 V). Symbol Parameter Conditions 25(cid:176)C -40 (cid:176)C to+85 (cid:176)C -40 (cid:176)C to+125 (cid:176)C Unit Min Typ Max Min Max Min Max V HIGH-level V = 2.0 V 1.5 - - 1.5 - 1.5 - V IH CC input voltage V = 3.0 V 2.1 - - 2.1 - 2.1 - V CC V = 5.5 V 3.85 - - 3.85 - 3.85 - V CC V LOW-level V = 2.0 V - - 0.5 - 0.5 - 0.5 V IL CC input voltage V = 3.0 V - - 0.9 - 0.9 - 0.9 V CC V = 5.5 V - - 1.65 - 1.65 - 1.65 V CC V HIGH-level V = V or V OH I IH IL output voltage I =-50 m A; V =2.0 V 1.9 2.0 - 1.9 - 1.9 - V O CC I =-50 m A; V =3.0 V 2.9 3.0 - 2.9 - 2.9 - V O CC I =-50 m A; V =4.5 V 4.4 4.5 - 4.4 - 4.4 - V O CC I =-4.0mA; V =3.0 V 2.58 - - 2.48 - 2.40 - V O CC I =-8.0mA; V =4.5 V 3.94 - - 3.8 - 3.70 - V O CC V LOW-level V = V or V OL I IH IL output voltage I = 50mA; V =2.0 V - 0 0.1 - 0.1 - 0.1 V O CC I = 50mA; V =3.0 V - 0 0.1 - 0.1 - 0.1 V O CC I = 50mA; V =4.5 V - 0 0.1 - 0.1 - 0.1 V O CC I = 4.0mA; V =3.0 V - - 0.36 - 0.44 - 0.55 V O CC I = 8.0mA; V =4.5 V - - 0.36 - 0.44 - 0.55 V O CC I input leakage V =5.5VorGND; - - 0.1 - 1.0 - 2.0 m A I I current V =0Vto5.5V CC I supply current V =V orGND; I = 0 A; - - 1.0 - 10 - 40 m A CC I CC O V =5.5 V CC C input - 1.5 10 - 10 - 10 pF I capacitance XC7SH86_1 © Nexperia B.V. 2017. All rights reserved Product data sheet Rev. 01 — 7 September 2009 4 of 11

XC7SH86 Nexperia 2-input EXCLUSIVE-OR gate 11. Dynamic characteristics Table 8. Dynamic characteristics GND = 0 V. For waveform seeFigure5. For test circuit seeFigure6. Symbol Parameter Conditions 25(cid:176)C -40 (cid:176)C to+85 (cid:176)C -40 (cid:176)C to+125 (cid:176)C Unit Min Typ Max Min Max Min Max t propagation A and B to Y [1] pd delay V = 3.0 V to 3.6 V [2] CC C =15pF - 4.0 11.0 1.0 13.0 1.0 14.0 ns L C =50pF - 5.8 14.5 1.0 16.5 1.0 18.5 ns L V = 4.5 V to 5.5 V [3] CC C =15pF - 3.4 6.8 1.0 8.0 1.0 8.5 ns L C =50pF - 4.9 8.8 1.0 10.0 1.0 11.5 ns L C power per buffer; [4] - 9 - - - - - pF PD dissipation C =50pF;f=1 MHz; L capacitance V =GNDtoV I CC [1] t is the same as t and t . pd PLH PHL [2] Typical values are measured at V = 3.3 V. CC [3] Typical values are measured at V = 5.0 V. CC [4] C is used to determine the dynamic power dissipation P (mW). PD D P =C · V 2· f +(cid:229) (C · V 2· f )where: D PD CC i L CC o f =input frequency in MHz; i f =output frequency in MHz; o C =output load capacitance in pF; L V =supply voltage in V. CC XC7SH86_1 © Nexperia B.V. 2017. All rights reserved Product data sheet Rev. 01 — 7 September 2009 5 of 11

XC7SH86 Nexperia 2-input EXCLUSIVE-OR gate 12. Waveforms A, B input VM tPHL tPLH Y output VM mna041 Measurement points are given inTable9. Fig 5. The input (A and B) to output (Y) propagation delays Table 9. Measurement points Type Input Output V V V I M M XC7SH86 GND to V 0.5· V 0.5· V CC CC CC VCC VI VO PULSE DUT GENERATOR RT C50L pF mna034 Test data is given inTable10. Definitions for test circuit: C = load capacitance including jig and probe capacitance. L R = termination resistance should be equal to the output impedance Z of the pulse generator. T o Fig 6. Load circuitry for switching times Table 10. Test data Type Input Load Test V t, t C I r f L XC7SH86 V £ 3.0ns 15pF, 50pF t , t CC PLH PHL XC7SH86_1 © Nexperia B.V. 2017. All rights reserved Product data sheet Rev. 01 — 7 September 2009 6 of 11

XC7SH86 Nexperia 2-input EXCLUSIVE-OR gate 13. Package outline TSSOP5: plastic thin shrink small outline package; 5 leads; body width 1.25 mm SOT353-1 D E A X c y HE v M A Z 5 4 A2 A A1 (A3) q 1 3 Lp L e w M bp e1 detail X 0 1.5 3 mm scale DIMENSIONS (mm are the original dimensions) UNIT mAax. A1 A2 A3 bp c D(1) E(1) e e1 HE L Lp v w y Z(1) q mm 1.1 0.1 1.0 0.15 0.30 0.25 2.25 1.35 0.65 1.3 2.25 0.425 0.46 0.3 0.1 0.1 0.60 7(cid:176) 0 0.8 0.15 0.08 1.85 1.15 2.0 0.21 0.15 0(cid:176) Note 1. Plastic or metal protrusions of 0.15 mm maximum per side are not included. OUTLINE REFERENCES EUROPEAN ISSUE DATE VERSION IEC JEDEC JEITA PROJECTION 00-09-01 SOT353-1 MO-203 SC-88A 03-02-19 Fig 7. Package outline SOT353-1 (TSSOP5) XC7SH86_1 © Nexperia B.V. 2017. All rights reserved Product data sheet Rev. 01 — 7 September 2009 7 of 11

XC7SH86 Nexperia 2-input EXCLUSIVE-OR gate Plastic surface-mounted package; 5 leads SOT753 D B E A X y HE v M A 5 4 Q A A1 c 1 2 3 Lp detail X e bp w M B 0 1 2 mm scale DIMENSIONS (mm are the original dimensions) UNIT A A1 bp c D E e HE Lp Q v w y 1.1 0.100 0.40 0.26 3.1 1.7 3.0 0.6 0.33 mm 0.95 0.2 0.2 0.1 0.9 0.013 0.25 0.10 2.7 1.3 2.5 0.2 0.23 OUTLINE REFERENCES EUROPEAN ISSUE DATE VERSION IEC JEDEC JEITA PROJECTION 02-04-16 SOT753 SC-74A 06-03-16 Fig 8. Package outline SOT753 (SC-74A) XC7SH86_1 © Nexperia B.V. 2017. All rights reserved Product data sheet Rev. 01 — 7 September 2009 8 of 11

XC7SH86 Nexperia 2-input EXCLUSIVE-OR gate 14. Abbreviations Table 11. Abbreviations Acronym Description CDM Charged Device Model DUT Device Under Test ESD ElectroStatic Discharge HBM Human Body Model MM Machine Model 15. Revision history Table 12. Revision history Document ID Release date Data sheet status Change notice Supersedes XC7SH86_1 20090907 Product data sheet - - XC7SH86_1 © Nexperia B.V. 2017. All rights reserved Product data sheet Rev. 01 — 7 September 2009 9 of 11

XC7SH86 Nexperia 2-input EXCLUSIVE-OR gate 16. Legal information 16.1 Data sheet status Document status[1][2] Product status[3] Definition Objective [short] data sheet Development This document contains data from the objective specification for product development. Preliminary [short] data sheet Qualification This document contains data from the preliminary specification. Product [short] data sheet Production This document contains the product specification. [1] Please consult the most recently issued document before initiating or completing a design. [2] The term ‘short data sheet’ is explained in section “Definitions”. [3] Theproductstatusofdevice(s)describedinthisdocumentmayhavechangedsincethisdocumentwaspublishedandmaydifferincaseofmultipledevices.Thelatestproductstatus information is available on the Internet at URLhttp://www.nexperia.com. 16.2 Definitions damage. Nexperia accepts no liability for inclusion and/or use of Nexperia products in such equipment or applications and therefore such inclusion and/or use is at the customer’s own risk. Draft —The document is a draft version only. The content is still under internal review and subject to formal approval, which may result in Applications —Applications that are described herein for any of these modifications or additions. Nexperia does not give any products are for illustrative purposes only. Nexperia makes no representations or warranties as to the accuracy or completeness of representation or warranty that such applications will be suitable for the informationincludedhereinandshallhavenoliabilityfortheconsequencesof specified use without further testing or modification. use of such information. Limiting values —Stress above one or more limiting values (as defined in Short data sheet —A short data sheet is an extract from a full data sheet theAbsoluteMaximumRatingsSystemofIEC60134)maycausepermanent withthesameproducttypenumber(s)andtitle.Ashortdatasheetisintended damagetothedevice.Limitingvaluesarestressratingsonlyandoperationof forquickreferenceonlyandshouldnotbereliedupontocontaindetailedand the device at these or any other conditions above those given in the full information. For detailed and full information see the relevant full data Characteristics sections of this document is not implied. Exposure to limiting sheet, which is available on request via the local Nexperia sales values for extended periods may affect device reliability. office. In case of any inconsistency or conflict with the short data sheet, the Terms and conditions of sale —Nexperia products are sold full data sheet shall prevail. subjecttothegeneraltermsandconditionsofcommercialsale,aspublished athttp://www.nexperia.com/profile/terms, including those pertaining to warranty, 16.3 Disclaimers intellectual property rights infringement and limitation of liability, unless explicitly otherwise agreed to in writing by Nexperia. In case of any inconsistency or conflict between information in this document and such General —Information in this document is believed to be accurate and terms and conditions, the latter will prevail. reliable.However,Nexperiadoesnotgiveanyrepresentationsor No offer to sell or license —Nothing in this document may be interpreted warranties,expressedorimplied,astotheaccuracyorcompletenessofsuch or construed as an offer to sell products that is open for acceptance or the information and shall have no liability for the consequences of use of such grant,conveyanceorimplicationofanylicenseunderanycopyrights,patents information. or other industrial or intellectual property rights. Right to make changes —Nexperiareservestherighttomake Export control —This document as well as the item(s) described herein changes to information published in this document, including without may be subject to export control regulations. Export might require a prior limitation specifications and product descriptions, at any time and without authorization from national authorities. notice.Thisdocumentsupersedesandreplacesallinformationsuppliedprior to the publication hereof. Suitability for use —Nexperia products are not designed, 16.4 Trademarks authorized or warranted to be suitable for use in medical, military, aircraft, space or life support equipment, nor in applications where failure or Notice:Allreferencedbrands,productnames,servicenamesandtrademarks malfunction of a Nexperia product can reasonably be expected are the property of their respective owners. to result in personal injury, death or severe property or environmental 17. Contact information For more information, please visit:http://www.nexperia.com For sales office addresses, please send an email to:salesaddresses@nexperia.com XC7SH86_1 © Nexperia B.V. 2017. All rights reserved Product data sheet Rev. 01 — 7 September 2009 10 of 11

XC7SH86 Nexperia 2-input EXCLUSIVE-OR gate 18. Contents 1 General description. . . . . . . . . . . . . . . . . . . . . . 1 2 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 3 Ordering information. . . . . . . . . . . . . . . . . . . . . 1 4 Marking. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 5 Functional diagram . . . . . . . . . . . . . . . . . . . . . . 2 6 Pinning information. . . . . . . . . . . . . . . . . . . . . . 2 6.1 Pinning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 6.2 Pin description . . . . . . . . . . . . . . . . . . . . . . . . . 3 7 Functional description . . . . . . . . . . . . . . . . . . . 3 8 Limiting values. . . . . . . . . . . . . . . . . . . . . . . . . . 3 9 Recommended operating conditions. . . . . . . . 4 10 Static characteristics. . . . . . . . . . . . . . . . . . . . . 4 11 Dynamic characteristics . . . . . . . . . . . . . . . . . . 5 12 Waveforms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 13 Package outline . . . . . . . . . . . . . . . . . . . . . . . . . 7 14 Abbreviations. . . . . . . . . . . . . . . . . . . . . . . . . . . 9 15 Revision history. . . . . . . . . . . . . . . . . . . . . . . . . 9 16 Legal information. . . . . . . . . . . . . . . . . . . . . . . 10 16.1 Data sheet status . . . . . . . . . . . . . . . . . . . . . . 10 16.2 Definitions. . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 16.3 Disclaimers. . . . . . . . . . . . . . . . . . . . . . . . . . . 10 16.4 Trademarks. . . . . . . . . . . . . . . . . . . . . . . . . . . 10 17 Contact information. . . . . . . . . . . . . . . . . . . . . 10 18 Contents. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 © Nexperia B.V. 2017. All rights reserved For more information, please visit: http://www.nexperia.com For sales office addresses, please send an email to: salesaddresses@nexperia.com Date of release: 07 September 2009