C L D - D Product family data sheet S 4 5 R e v 1 1 A Cree® XLamp® XB-D LEDs PRODUCT DESCRIPTION FEATURES TABLE OF CONTENTS The XLamp® XB-D LeD brings • XB-D white binned @ 85 °C; XB-D Characteristics .......................................2 next-generation performance, price and color binned @ 25 °C Flux Characteristics - White ...................3 size to all LeD lighting applications. The • Up to 136 lm/W in cool white Flux Characteristics - Color ...................4 XB-D’s footprint enables smaller designs (@ 85 °C, 350 mA) Relative Spectral Power Distribution ....6 with densely packed arrays for better • Available in white, 80-minimum CRI Relative Flux vs. Junction light mixing and concentration. white, and 70-minimum CRI cool Temperature ...........................................7 white, royal blue, blue, green, PC electrical Characteristics .......................8 The XB-D shares common footprint and amber, amber, red-orange & red electrical Characteristics .......................8 uniform package design across all white • 1 A maximum drive current Relative Flux vs. Current ........................9 and color configurations, simplifying • Wide viewing angle: from 110° (PC Relative Flux vs. Current ........................9 board and optical designs for many amber) to 140° (red) Relative Chromaticity vs. Current ........10 LeD systems. The XB-D is optimized to • Reflow solderable - JEDEC Relative Chromaticity vs. dramatically lower system cost in any J-STD-020C compatible Temperature .........................................11 illumination application, from indoor • Unlimited floor life at Typical Spatial Distribution ..................11 and outdoor lighting to architectural and ≤ 30 °C/85% RH Thermal Design ....................................12 transportation lighting. • electrically neutral thermal path Reflow Soldering Characteristics ........13 • RoHS and REACh compliant Notes ....................................................14 • UL® recognized component Mechanical Dimensions ......................16 (E349212) Tape and Reel .......................................18 Packaging .............................................19 p m A L X / m o C e. e R C w. w w Copyright © 2011-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and Cree, Inc. XLamp® are registered trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300

XLamp® XB-D LED ChARACTERISTICS Characteristics Unit Minimum Typical Maximum Thermal resistance, junction to solder point - white, royal blue, blue °C/W 6.5 Thermal resistance, junction to solder point - green °C/W 11 Thermal resistance, junction to solder point - PC amber °C/W 8.5 Thermal resistance, junction to solder point - amber °C/W 7 Thermal resistance, junction to solder point - red-orange, red °C/W 5 Viewing angle (FWHM) - white degrees 115 Viewing angle (FWHM) - royal blue, blue, green degrees 135 Viewing angle (FWHM) - PC amber, degrees 110 Viewing angle (FWHM) - amber, red-orange, red degrees 140 Temperature coefficient of voltage - white mV/°C -2.5 Temperature coefficient of voltage - royal blue, blue, green mV/°C -3.3 Temperature coefficient of voltage - PC amber mV/°C -2.4 Temperature coefficient of voltage - amber, red-orange, red mV/°C -2 ESD withstand voltage (HBM per Mil-Std-883D) - white, royal blue, blue, green v 8000 ESD classification (HBM per Mil-Std-883D) - PC amber Class 3A ESD classification (HBM per Mil-Std-883D) - amber, red-orange, red Class 2 DC forward current mA 1000 Reverse voltage v -5 Forward voltage (@ 350 mA, 85 °C) - white v 2.9 3.5 Forward voltage (@ 350 mA, 25 °C) - royal blue, blue v 3.1 3.7 Forward voltage (@ 350 mA, 25 °C) - green v 3.3 3.9 Forward voltage (@ 350 mA, 25 °C) - PC amber v 3.1 3.4 Forward voltage (@ 350 mA, 25 °C) - amber, red-orange, red v 2.25 2.6 LeD junction temperature °C 150 Copyright © 2011-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 2

XLamp® XB-D LED FLUX ChARACTERISTICS - WhITE (T = 85 °C) J The following table provides several base order codes for XLamp XB-D LEDs. It is important to note that the base order codes listed here are a subset of the total available order codes for the product family. For more order codes, as well as a complete description of the order- code nomenclature, please consult the XLamp XB-D LeD Binning and Labeling document. Minimum Luminous Flux Calculated Minimum CCT Range @ 350 mA Luminous Flux (lm)** Color Order Code Flux (lm) @ Flux (lm) @ Minimum Maximum Group 700 mA 1000 mA 85 °C 25 °C* R3 122 139 210 271 XBDAWT-00-0000-000000F51 Cool White 5000 K 8300 K R2 114 130 196 253 XBDAWT-00-0000-000000E51 R3 122 139 210 271 XBDAWT-00-0000-00000BF51 70 CRI Minimum 5000 K 8300 K Cool White R2 114 130 196 253 XBDAWT-00-0000-00000BE51 R2 114 130 196 253 XBDAWT-00-0000-00000LEE4 Neutral White 3700 K 5000 K Q5 107 122 184 237 XBDAWT-00-0000-00000LDE4 Q4 100 114 172 222 XBDAWT-00-0000-00000LCE4 Q4 100 114 172 222 XBDAWT-00-0000-00000HCE7 80 CRI Minimum 2600 K 6200 K Q3 93.9 107 162 208 XBDAWT-00-0000-00000HBE7 White Q2 87.4 100 150 194 XBDAWT-00-0000-00000HAE7 Q4 100 114 172 222 XBDAWT-00-0000-00000LCE7 Warm White 2600 K 3700 K Q3 93.9 107 162 208 XBDAWT-00-0000-00000LBE7 Q2 87.4 100 150 194 XBDAWT-00-0000-00000LAE7 Notes: • Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI measurements. See the Measurements section (page 14). • Typical CRI for Neutral White, 3700 K - 5000K CCT is 75. • Typical CRI for Warm White, 2600 K - 3700 K CCT is 80. • Minimum CRI for 70 CRI Minimum Cool White is 70. • Minimum CRI for 80 CRI Minimum White is 80. * Flux values @ 25 °C are calculated and are for reference only. ** Calculated flux values at 700 mA and 1000 mA are for 85 °C and are for reference only. Copyright © 2011-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 3

XLamp® XB-D LED FLUX ChARACTERISTICS - COLOR (T = 25 °C) J The following tables provide several base order codes for XLamp XB-D LEDs. It is important to note that the base order codes listed here are a subset of the total available order codes for the product family. For more order codes, as well as a complete description of the order- code nomenclature, please consult the XLamp XB-D LeD Binning and Labeling document. Dominant Wavelength Range Minimum Radiant Flux (mW) @ 350 mA Color Minimum Maximum Order Code DWL DWL Group Group Group Flux (mW) (nm) (nm) 36(Q) 600 XBDROY-00-0000-000000Q01 35(P) 575 XBDROY-00-0000-000000P01 34 (N) 550 XBDROY-00-0000-000000N01 Royal D36 450 D57 465 33 (M) 525 XBDROY-00-0000-000000M01 Blue 32 (L) 500 XBDROY-00-0000-000000L01 31 (K) 475 XBDROY-00-0000-000000K01 30 (J) 450 XBDROY-00-0000-000000J01 Dominant Wavelength Range Minimum Luminous Flux (lm) @ 350 mA Color Minimum Maximum Order Code DWL DWL Group Group Group Flux (lm) (nm) (nm) M2 39.8 XBDBLU-00-0000-000000201 Blue B3 465 B6 485 K3 35.2 XBDBLU-00-0000-000000Z01 K2 30.6 XBDBLU-00-0000-000000Y01 Dominant Wavelength Range Minimum Luminous Flux (lm) @ 350 mA Color Minimum Maximum Order Code DWL DWL Group Group Group Flux (lm) (nm) (nm) R2 114 XBDGRN-00-0000-000000E01 Q5 107 XBDGRN-00-0000-000000D01 Green G2 520 G4 535 Q4 100 XBDGRN-00-0000-000000C01 Q3 93.9 XBDGRN-00-0000-000000B01 Q2 87.4 XBDGRN-00-0000-000000A01 Minimum Luminous Flux (lm) @ 350 mA Color Color Bin Order Codes Group Flux (lm) Q4 100 XBDBPA-00-0000-000000C01 PC Amber Y2 Q3 93.9 XBDBPA-00-0000-000000B01 Q2 87.4 XBDBPA-00-0000-000000A01 Copyright © 2011-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 4

XLamp® XB-D LED FLUX ChARACTERISTICS - COLOR (T = 25 °C) - Continued J Dominant Wavelength Range Minimum Luminous Flux (lm) @ 350 mA Color Minimum Maximum Order Code DWL DWL Group Group Group Flux (lm) (nm) (nm) P4 80.6 XBDAMB-00-0000-000000901 P3 73.9 XBDAMB-00-0000-000000801 Amber A2 585 A3 595 P2 67.2 XBDAMB-00-0000-000000701 N4 62 XBDAMB-00-0000-000000601 N3 56.8 XBDAMB-00-0000-000000501 Dominant Wavelength Range Minimum Luminous Flux (lm) @ 350 mA Color Minimum Maximum Order Code DWL DWL Group Group Group Flux (lm) (nm) (nm) Q5 107 XBDRDO-00-0000-000000D01 Q4 100 XBDRDO-00-0000-000000C01 Q3 93.9 XBDRDO-00-0000-000000B01 Red- O3 610 O4 620 Orange Q2 87.4 XBDRDO-00-0000-000000A01 P4 80.6 XBDRDO-00-0000-000000901 P3 73.9 XBDRDO-00-0000-000000801 Dominant Wavelength Range Minimum Luminous Flux (lm) @ 350 mA Color Minimum Maximum Order Code DWL DWL Group Group Group Flux (lm) (nm) (nm) P2 67.2 XBDRED-00-0000-000000701 Red R2 620 R3 630 N4 62 XBDRED-00-0000-000000601 N3 56.8 XBDRED-00-0000-000000501 Note: Cree maintains a tolerance of ±7% on flux and power measurements and ±1 nm on dominant wavelength measurements.See the Measurements section (page 14). Copyright © 2011-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 5

XLamp® XB-D LED PC Amber data moved from XBD PCA Final Datasheet_180424_jlc.xlsx to tabs on this spreadsheet Relative Spectral Power RELATIvE SPECTRAL POWER DISTRIBUTION 100 80 ) % ( r e w o P 60 t 5000 K - 10,000 K CCT n a di 3700 K - 5000 K CCT a R e 40 2600 K - 3700 K CCT v ti a el R 20 0 380 430 480 530 580 630 680 730 780 Wavelength (nm) 100% 3700 K - 5000 mK CCT data from: 80% G:\Marketing Docs\Product groups\XLamp\Data sheets\XLamp XR-E\graphics\CLD-DS05.009.Datasheet Graphs-realigned.xls Royal Blue r e w Blue o P 60% nt Green a di PC Amber a R Amber e 40% v ti Red-Orange a Rel Red 20% 0% 380 430 480 530 580 630 680 730 780 Wavelength (nm) Copyright © 2011-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 6

XLamp® XB-D LED Relative Flux Output vs. Junction Temperature RELATIvE FLUX vS. JUNCTION TEMPERATURE (I  = 350 mA) F 120% 100% x u White Fl s 80% Blue u o n Green mi 60% u PC Amber L tive 40% Amber ela Red-Orange, Red R 20% Relative Flux Output vs. Junction Temperature 0% 25 50 75 100 125 150 royal blue Junction Temperature (ºC) 120% 100% x u Fl 80% nt a di a 60% Royal Blue R e v ti 40% a el R 20% 0% 25 50 75 100 125 150 Junction Temperature (ºC) Copyright © 2011-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 7

XLamp® XB-D LED ELECTRICAL ChARACTERISTICS (T = 85 °C) J 1000 900 800 A) m 700 ( nt e 600 r r u C 500 White d r a w 400 r o F 300 200 100 0 2.0 2.5 3.0 3.5 4.0 Electrical Characteristics (Tj = 25ºC) Forward Voltage (V) ELECTRICAL ChARACTERISTICS (T = 25 °C) J 1000 900 800 ) A m 700 Royal Blue ( ent 600 Blue r r u C 500 Green d r wa 400 PC Amber r o F 300 Amber, Red-Orange, Red 200 100 0 2.0 2.5 3.0 3.5 4.0 Forward Voltage (V) Copyright © 2011-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 8

XLamp® XB-D LED RELATIvE FLUX vS. CURRENT (T = 85 °C) J 300% 250% x u Fl 200% s u o n mi 150% White u L e ativ 100% el R 50% 0% Relative0 Inte10n0 sity20 0vs. 3C00urre40n0t (T50j0 = 26500ºC)700 800 900 1000 Forward Current (mA) RELATIvE FLUX vS. CURRENT (T = 25 °C) J 300% 250% x u s Fl 200% Blue u o Green n mi 150% PC Amber u e L Amber v ati 100% Red-Orange, Red el R 50% 0% 0 100 200 300 400 500 600 700 800 900 1000 Forward Current (mA) Copyright © 2011-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 9

Relative Intensity vs. Current (Tj = 25ºC) XLamp® XB-D LED royal blue RELATIvE FLUX vS. CURRENT (T = 25 °C) - Continued J 300% 250% x Flu 200% nt a di 150% Royal Blue a R e v ati 100% el R 50% 0% 0 100 200 300 400 500 600 700 800 900 1000 Forward Current (mA) Relative Chromaticity Vs. Current, WW ReLAtive ChRomAtiCity vs. CuRRent (WARm White) 0.020 T =85 °C J 0.015 0.010 0.005 ΔCCx 0.000 ΔCCy -0.005 -0.010 -0.015 -0.020 0 100 200 300 400 500 600 700 800 900 1000 Current (mA) Copyright © 2011-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 10

XLamp® XB-D LED ReLAtive ChRoRmelAattivieC Cithryom vasti.c ittye Vms. pTeemRpAetrautuRree W (WWARm White) 0.020 I =350 mA F 0.015 0.010 0.005 ΔCCx 0.000 ΔCCy -0.005 -0.010 -0.015 -0.020 0 25 50 75 100 125 150 Tsp (°C) Typical Spatial Radiation Pattern TyPICAL SPATIAL DISTRIBUTION 100% y sit 80% n e t In White s u 60% o Royal Blue, Blue, n mi Green u PC Amber L e 40% v Amber, Red-Orange, ti a Red el R 20% 0% -90 -70 -50 -30 -10 10 30 50 70 90 Angle (°) Copyright © 2011-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 11

XLamp® XB-D LED ThERMAL DESIGN Thermal white royal blue, blue The maximum forward current is determined by the thermal resistance between the LED junction and ambient. It is crucial for the end product to be designed in a manner that minimizes the thermal resistance from the solder point to ambient in order to optimize lamp life and optical characteristics. 1200 1200 White Royal Blue, Blue 1000 1000 mA) A) m Current ( 680000 m Current (m 680000 mu mu Maxi 400 Rj-a = 10°C/W Maxi 400 Rj-a = 10°C/W Rj-a = 15°C/W Rj-a = 15°C/W 200 Rj-a = 20°C/W 200 Rj-a = 20°C/W Rj-a = 25°C/W Rj-a = 25°C/W green 0 0 0 20 40 60 80 100 120 140 amb1e6r0 0 20 40 60 80 100 120 140 160 Ambient Temperature (ºC) Ambient Temperature (ºC) 1200 1200 Green Amber 1000 1000 A) A) m m m Current ( 680000 m Current ( 680000 mu mu Maxi 400 Maxi 400 Rj-a = 10°C/W Rj-a = 15°C/W Rj-a = 15°C/W 200 200 Rj-a = 20°C/W Rj-a = 20°C/W PC amber Rj-a = 25°C/W Rj-a = 25°C/W 0 0 0 20 40 60 80 100 120 1r4e0d-orang1e60, red 0 20 40 60 80 100 120 140 160 Ambient Temperature (ºC) Ambient Temperature (ºC) 1200 1200 PC Amber Red-Orange, Red 1000 1000 A) A) m m nt ( 800 nt ( 800 e e urr urr C C m 600 m 600 u u m m xi xi a 400 a 400 M Rj-a = 13°C/W M Rj-a = 10°C/W Rj-a = 15°C/W Rj-a = 15°C/W 200 200 Rj-a = 20°C/W Rj-a = 20°C/W Rj-a = 25°C/W Rj-a = 25°C/W 0 0 0 20 40 60 80 100 120 140 160 0 20 40 60 80 100 120 140 160 Ambient Temperature (ºC) Ambient Temperature (ºC) Copyright © 2011-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 12

XLamp® XB-D LED REFLOW SOLDERING ChARACTERISTICS In testing, Cree has found XLamp XB-D LEDs to be compatible with JEDEC J-STD-020C, using the parameters listed below. As a general guideline, Cree recommends that users follow the recommended soldering profile provided by the manufacturer of the solder paste used, and therefore it is the lamp or luminaire manufacturer’s responsibility to determine applicable soldering requirements. Note that this general guideline may not apply to all PCB designs and configurations of reflow soldering equipment. t T P Critical Zone P T to T L P Ramp-up T ure L Tsmax tS t a r e p Ts m min e T ts Ramp-down Preheat 25 t 25˚C to Peak Time IPC/JEDEC J-STD-020C Profile Feature Lead-Free Solder Average Ramp-Up Rate (Ts to Tp) 1.2 °C/second max Preheat: Temperature Min (Ts ) 120 °C min Preheat: Temperature Max (Ts ) 170 °C max Preheat: Time (ts to ts ) 65-150 seconds min max Time Maintained Above: Temperature (T) 217 °C L Time Maintained Above: Time (t) 45-90 seconds L Peak/Classification Temperature (Tp) 235 - 245 °C Time Within 5 °C of Actual Peak Temperature (tp) 20-40 seconds Ramp-Down Rate 1 - 6 °C/second Time 25 °C to Peak Temperature 4 minutes max. Note: All temperatures refer to topside of the package, measured on the package body surface. Copyright © 2011-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 13

XLamp® XB-D LED NOTES Measurements The luminous flux, radiant power, chromaticity, forward voltage and CRI measurements in this document are binning specifications only and solely represent product measurements as of the date of shipment. These measurements will change over time based on a number of factors that are not within Cree’s control and are not intended or provided as operational specifications for the products. Calculated values are provided for informational purposes only and are not intended or provided as specifications. pre-Release Qualification testing Please read the LeD Reliability Overview for details of the qualification process Cree applies to ensure long-term reliability for XLamp LEDs and details of Cree’s pre-release qualification testing for XLamp LEDs. Lumen Maintenance Cree now uses standardized IES LM-80-08 and TM-21-11 methods for collecting long-term data and extrapolating LED lumen maintenance. For information on the specific LM-80 data sets available for this LED, refer to the public LM-80 results document. Please read the Long-Term Lumen Maintenance application note for more details on Cree’s lumen maintenance testing and forecasting. Please read the Thermal Management application note for details on how thermal design, ambient temperature, and drive current affect the LeD junction temperature. Moisture Sensitivity Cree recommends keeping XLamp LEDs in the provided, resealable moisture-barrier packaging (MBP) until immediately prior to soldering. Unopened MBPs that contain XLamp LeDs do not need special storage for moisture sensitivity. Once the MBP is opened, XLamp XB-D LEDs may be stored as MSL 1 per JEDEC J-STD-033, meaning they have unlimited floor life in conditions of ≤ 30 ºC/85% relative humidity (RH). Regardless of storage condition, Cree recommends sealing any unsoldered LEDs in the original MBP. RohS Compliance The levels of RoHS restricted materials in this product are below the maximum concentration values (also referred to as the threshold limits) permitted for such substances, or are used in an exempted application, in accordance with EU Directive 2011/65/EC (RoHS2), as implemented January 2, 2013. RoHS Declarations for this product can be obtained from your Cree representative or from the Product ecology section of the Cree website. REACh Compliance REACh substances of very high concern (SVHCs) information is available for this product. Since the European Chemical Agency (ECHA) has published notice of their intent to frequently revise the SVHC listing for the foreseeable future, please contact a Cree representative to insure you get the most up-to-date REACh SVHC Declaration. REACh banned substance information (REACh Article 67) is also available upon request. Copyright © 2011-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 14

XLamp® XB-D LED NOTES - CONTINUED UL® Recognized Component This product meets the requirements to be considered a UL Recognized Component with Level 4 enclosure consideration. The LeD package or a portion thereof has been investigated as a fire and electrical enclosure per ANSI/UL 8750. vision Advisory WARNING: Do not look at an exposed lamp in operation. Eye injury can result. For more information about LEDs and eye safety, please refer to the LeD eye Safety application note. Copyright © 2011-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 15

XLamp® XB-D LED 6 6 5 5 4 4 3 3 2 2 1 1 NOTICE NOTICE REVISONS REVISONS CCORENET ACIONNEFDI DWEINTTHIICCANORL A.EN TRETH EAC ITSIONH NPEEFLD IOP DWRTE OINATPTNHRIDIANIE LT TA.H ATRERHE IY INTS AH FPNOEL DROPMRT OAATPNIRODIEN TTHAER IYN AFNODRMATION REV DERSECVRIPTION DESCRBIYPTIODNATEAPP'D BY DATEAPP'D MEChANICAMCLOA DNYIF MNIDOEETNN BSTEIIOA CLNO ISNPIFEMCODOAR,N YMRF ENAIPDOTREITOON BNDTEIU AO CCLFOE ICDNPR IFOEEODRER ,, D MRINIESACPCT.RL ITOOOHNDSIEUS OD CPF ETL CDOOR T OAE REN ,D YIN ISCC.L TOHSIESD P TLOOT A NY B ADDED NOBT CH TO BACAKDSDIDEED NOTCDHC T O1 B0A/C16K/S1I2D E DC 10/16/12 UNAUTHORIZED PEURNSAOUNTT HH WEOI RTWIHZROEITDUT TPEENR CSOONNT S H EWENI TWTHROITUTTEN CONSENT C CORRECTED SCOLDERPACDO DRRIMEECNTESDIO SNOLDDCE RPA7/D1 D/1IM5ENSION DC 7/1/15 OF CREE INC. OF CREE INC. D ADDED ALDTERNATE VIEAWDSDED ALTEDRCN AT8E/ 1V9I/E1W5S DC 8/19/15 Thermal vias, if present, are not shown on these drawings. All measurements are ±.13 mm unless otherwise indicated. D D 2.45 2.45 1.84 1.84 1.63 1.63 2.29 REF 2.29 REF 2.29 REF 2.29 REF D D 0.76 0.460.76 0.46 0.46 0.46 2.45 2.45 2.286 2.286 2.29 REF 2.29 REF 2.29 REF 2.29 REF 6 6 6 5 5 5 4 4 4 3 3R1.309 R1.09 2 2 2 1 1 1 C C NOTNICOENTIOCTEICE 0.82 REVISROENVSRISEOV0NIS.S8O2NS CCCOORENNECCCFT IOORACDENNIOCCCENEOORNFTNE IAECNNFTDDEIOIFTIE NDA WINACNEDELIOIFNTDE NTIININN TDHEAWFIFETDILANIIONI DTLAIW RNTAHE.L MIITFNRI TANIOHENTAHL RIIAF.TTISA NMTORIH LOP HERAAE.NL IMT TRTSOP HOIEH AROTP IFETT OSNLA IHC OPPO PNORERRTNLDFE I OOP AE EOTCPRTTN,HF RR OAIDA NEEICRPE NE CTRIYRTN,D.H E I AIAET FNEETRTNHO, CH IYAIDNRI.NSE RAMTF CIYPNHONA. L DRAITFTSOMNHOI TOPDRIA SNLMT OPIATOLT ONITO N C C RBE V0R.B6E 5VRBE VADDEADD NDD0OAEE.SD3TDC6CD NDRHE0OIED .PT6ST TNO5DCCIO EORHBSTINA PTCCCTORHKI IO BPSTNATIODCI OEBK NASCI0DK.E3S 6IDDBECY D1BD0CYA/ 1TDB6EC1Y/D 01AA/2P1T1 PD6E0'/AD/1A1T 2P6E /P1A'D2P P'D MAYM NAOMYT AN BYOE NT C OBOTEP BCIEEOD PC, RIOEEPDPI,E RRDOE, DPRRUEOCPDERDUO CDOEURDC D EOIDSRC ODLRIOS DSCEILSDOC STLEOODS A ETNDOY TA ON YA NY OUNF ACOUURNFTE HAEOUC UONFRIN TRAECCHIEURZ. OTEIENHREDC IO IZP.NREECIDRZ. SEPODE NRPT S HE WORENSI T TWO H HWRNET OII TH TWUWTEHTREI OTWINTHUR TCTOIETOUNTNT ECSNOE NNCTOSENNSTENT Top view C C CCORRCEOCSRTiCERdODEeRC SvRTOiEEeLCDwDT SEEORDPL SDAOEDLR DDPIEAMR0DEP. 9NDA2SIDMI ODENNIMSEDIONCNS IODN7C/ 1D/1C75 0/1.9/721/51/15 D D D ADDEADD ADLAETDDED RAENLDTA AETRLETN VEAIRETNWEA SVTIEEW VSIEWDSC D8C/1 D9/C81 /5198//1159/15 PRIMARY PRIMARY ALTERNATIVE ALTERNATIVE D D D 2.29 R2E.2F92 R.2E9F REF 1.84 1.841.84 1.63 1.631.63 2.29 R2E.2F92 R.2E9F REF D D D 2.45 2.452.45 0.76 0.760.76 0.46 0.460.46 0.46 0.460.46 2.29 2.29 2.29 2.29 0.36 0.36 0.39 0.39 2.45 2.452.45 2.2862.2826.286 2.29 R2E.2F92 R.2E9F REF 2.29 R2E.2F92 R.2E9F REF B B 0.92 00.3.932 0.33 0.85 0.85 B B Anode Anode Anode 0.85 C 0C.85C R1.09R1.0R91.09 0.82 0.820.82 C C C 0.65 0.650.65 2.29 2.29 2.29 2.29 0.36 0.360.36 0.92 0.920.92 0.85 0.25 0.85 0.25 Bottom view Alternate Bottom view Alternate Bottom view ALL DIMENSIONS ARE A±LL. 1D3IM UENNLSESIOSN OST AHREER W±IS.E1 3N OUNTELDESS OTHERWISE NOTED PRIMAPRRYIMPRAIRMYARY ALTERANLTAAETRLIVTNEEARTNIVAETIVE 0.17 0.17 A A MUINLLDLIEIMMSESET NOESTRIHOS ENARSNW DAIR SAEEF ITSNMDCEPU DRIEHRNL. C FLDALCEIIIEIFRNMWCMSIOIEEKSSENNDTH NOIE N.SBTRDD0IHYOS9AA EN/ATTR1SN9WEE DA/I1R SA1EEF ITSNDCEP DREHR. C FACEIIFRNWCIOIEKSNNDHI N.BDD0Y9AA/TT19EE/11 4PD6hu0orh0na eSm i(l9,i cN1o9.nC) D321r7i3v7-e0533004PD6hu0orh0na eSm i(l9,i cN1o9.nC) D321r7i3v7-e053300 TOLERANCE UNLESS SPTEOCL-IE-FRIEADN:CE U--NLESS SPEC-I-FIED: -- Fax (919) 313-5558 Fax (919) 313-5558 RECOMMENDED STENCRIELC POAMTTMEERNNDED STENCIL PATTERN ..XXXX X± ± ..21525 APPR..OXXVXX XE± D± D A ..T2152E5TITALPEPROVEDDATE TITLE A A RECOMMENDED PCB SROELCDOERM PMAEDNDED PCB SOLDER PAD(HATCHED AREA IS OPE(HNAINTGC)HED AREA IS OPENING) X° ± .5° X° ± - -.5° -- THIRD ANGLE PROJETCFHTOIIRRO DSN HAENEGT LMEE PTARLO PJAEMRCFTTOASIRO TO SNENHRLEYIEATL METAL PAMRT2AS5 T2O5EN SRLBYIAC LHEW OUTLIN2E525 SBC HEW OUTLINE 2.29 2.292.29 2.29 2.292.29 ..XXX ± ± .17.55 ..XX--X ± ± .17.55 SIZE D-R-AWING SNIZOE. DRRAEWVI.NG NO. REV. 0.36 0.360.36 0.39 0.390.39 X.X° X X ± ± ..52°5 FINAL PX.XR° XO X T± ± E C ..T52I°5VE FINCFISINHAL PROTE2C6T1I0V-0E0 F0IN1C9ISH D2610-00019 D B B B SURFACE FIN1I.S6H: SURFA-C-E FIN1I.S6H: SCA30L.E000 -- SCSA3H0L.EE00E0OTF 1/1 SHEEOTF 1/1 0.92 0.920.92 0.33 0.330.33 0.85 0.850.85 6 6 5 5 4 4 3 3 2 2 1 1 B B B Copyright © 2011-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of U0L. L8L5C.0.850.85 16 2.29 2.292.292.29 2.292.29 0.25 0.250.25 0.85 0.850.85 ALL DAIMLLE ANDLSIMLI ODENNIMSS EIAONRNSESI O A±NRSE. 1A 3R± UE N.1±L3E US.1SN3 LO UETNSHSLEE ORSTWSH IOSETERH WNEOIRSTWEE NIDSOET NEODTED 0.17 0.170.17 DRAWDRNAD BWRDYAANWT BEDNYA BTDYEATE A A A MUINLLDLIEIMMMUSIESNELT NLMDLOEUIESIMTIRMNLSIHOSELDSLE ENTIE NAIMOMRESSNSTWERS EIDAHTOS NIOR SE ENASATEERRFSIN H OSWITS NDA ENCEPAI DR RSRSAEHNE.WE CF FDAC E ITSIIINR FRSNCACEPIEE ODIERFEKHS .NIDTS C NHFCECEPIIIN .DFRNRCEHDI0.O ICE FKS9CEANDIIH/FRNCTI1IN.OIE9KESD0ND/H91AIN./1T1D09E9A//1T119E/11 4PD6hu0orh0na 4PDeSm 6hui(l09or,i ch4PDN01noa6 9hue.SnCm0)o ri( h 0lnD39,2i ac eN11r7Smoi 39v7.i(nCl9-)e,i0 5c N1D3323o91.r70nCi)3v70 D3-e2051r733i3v70-e0503300 TOLERTAONLTECOREAL UENNRCALEEN USCSNE LS UEPNSESLCE -SI-FSPISEE DSC:P-I-FEICED-I--F-:IED:-- -- Fax (9F1a9x) F( 3a91x1 39(9-)5 135915)38 3-51535-58558 RECORMEMCREOENMCDMOEMEDN MSDTEEENDND SCETIDLE SPNTACETILNT PCERAILNT PTAETRTNERN ..XXXX X± ± .. XX XX..21 X..± 52±XX 5 XX X..± 21± 52 A5 ..21P52P5RAOPVPAERPDDOPAVRTEOEDDVATETDIDTEALTTEEITTLIETLE A A A RECORMEMCREOENMCDMOEMEDN MPDCEEBND DS PEOCDLB DP SECORB LP SDAOEDLRD PEARD PAD (HATC(HHAET(DHC AAHRTEECDAH A EISRD EO AAPR EIESNA OI NIPSGE O)NPINEGN)ING) X° ± X° . 5 °±X ° ±. 5° .5° -- -- -- THIRTDH AITRNHDGI LAREDN P GARLNOEG JPLERECFO TPOJIRROE OSCNFHJTOEEIROCEF TSTNOH IMROE ESENTHTAE MLE ETPT AMAMRELTT APSAA TOLMRE NPTRLAASYIMR TAOTENALSRL TOYIEANRLLYIAL 2525 2S5B2C52 H 5S2EB5WC S OHBUECWT HL OEINWUET OLUINTELINE .X ± .X 1 ±. .5 X ± 1 .5 1.5 .XX ± . X X.7 .± 5X X .± 7 5 .75 -- -- --SIZESIZSEDIZREAWDRINADGWR ANINWOG.IN NGO N. OR.EV.REVR.EV. X.X° X X ± ± X. X° X.. 52 X °±X.5 ±X° X X ±.. 52± ° 5 F ..I52N°5ALF PINRAFOLITN PEARCLOT PITVREEOC FTTIEINVCCIEST HFIVINEC IFSIHNCISH2610-206010021-6901000-1090019D D D SURFASUCRES FFUAINRC1FIE.S6A HFCI:NE 1 I.FS6IHN1:I .S6H: -- -- --SCA30LS.E0C0AS300LC.E0A300L0.E000 SHEESOTHFESEH1OT/E1FEOT1F/1 1/1 6 6 6 5 5 5 4 4 4 3 3 3 2 2 2 1 1 1

6 6 5 5 4 4 3 3 2 2 1 1 NOTICNEOTICE REVISORNEVSISONS CCORENETCC ACORIOENNNEET FDACI DIOWNENEINTFDTHI DWIIAENILNT A.T HTRIIAHENL I TSA. H TRPEHEL OIPTSRTH P OEALP NOPRDRTIE OTATPHNAREDRI E IYTNT HAFAENOR DRIYNM AFANOTDRIMONATION REV REV DESCRDIPETSICORNIPTION BY DBAYTEADPAPT'ED APP'D MCOANYF MCNIDOOAENTYNF BNTIDEOIA ECTLN O BTINPEIAI FECLODO RI,NP MRIFEEAOPDTRR, IMROOENDAPU TORICOOFE NDCDU R OOCEFREE C ,DD IR NIOSECRCE. ,L D TIONIHSSCICES.L D TPO HTLSOIOEST D AP NTLOOY T A NY B B ADDEDA NDODETDC HN OTOTC BHA CTKOS BIDAEC KSIDE DC 1D0C/1 6/1102/ 16/12 UNAUUTNHAOURTIZHEODR IPZEERDS POENT R H SWEOI NTWT H H RWOEITUI TWTTHERNOIT UCTTOENN SCEONNTSENT C C CORRECCOTRERDE SCOTLEDDE SROPLADDE DRIPMAEDN DSIIMONENSDICO N 7D/C1 /157/1/15 OF CROEFE C INRECE. INC. D D ADDEDA ADLDTEEDR ANLATTEER VNIAETWES VIEWS DC 8D/C1 9/185/19/15 D D 2.45 2.45 1.84 1.84 1.63 1.63 2.29 RE2F.29 REF 2.29 RE2F.29 REF D D 0.76 0.76 0.46 0.46 0.46 0.46 2.45 2.45 2.2862.286 2.29 RE2F.29 REF 2.29 RE2F.29 REF R1.09R1.09 C C 0.82 0.82 C C 0.65 0.65 0.36 0.36 0.92 0.92 XLamp® XB-D LED PRIMAPRRYIMARY ALTERANLATTEIVRNEATIVE MEChANICAL DIMENSIONS - CONTINUED 2.29 2.29 2.29 2.29 0.36 0.36 0.39 0.39 B B 0.92 0.92 0.33 0.33 0.85 0.85 B B 0.85 0.85 2.29 2.29 2.29 2.29 0.25 0.25 0.85 0.85 ALL DIAMLELN DSIIMONENS SAIOREN S± AR.1E3 U±N.L1E3S USN OLTEHSESR OWTIHSEER NWOITSEED NOTED 0.17 0.17 A A RERCeOcMoRMmECEmONMeDnEMdDEe PNdCD PBE DCS BOPL CSDBoE SlRdO PeLArD DPERa dPAD R(HEACTOCMR(HR(HMEhEeACDEacTON toACcMDmRHhEMEEemDADEd SNe IASATnDR ErOdEEeNDePAaCd E S IIiN SLTsSI E OPNtoNeAPGpnCTE)ecITNLniEI lPNi RnPAGNgaT))tTtEeRrnN THIRDT AHNIRGDL AE NPGRLOEJ EPMCTRUFIOTONOLLILRDLJOEI EIEMSMRNMSCHTUA..XFESEXX°IOTEO NTNL N XXO ELIELRDL CSO X ±ETT± IR EI±E MIS MR N HO SS M HUA..X E ESNEXX A°.EE.. NTNR N5 21XXSON TE°ELW C52 S X ±TTADA± R E5±E I I HLO R SSS M AU EESNEP AF.E..NR 521SAITSNST°NLW52M ADCREPPADAE 5DRTIEEHPRLR SSA.A SCC EFSEAPCPEF -TIII O -FFARINTSSRWCNEIINMADCOREPPEIEOK SDRRLNTENDEDHPRHA.VYI SCC :IF AAPCNE.B -TIEIIO-FDDDFRN0RLWCEYDIINO9EAAAIEOKSR--/LNNDD--TTTH1VYI:I A9NEEE.BE/DDD0L1YD9AAAT1--/--ITTT1T9EEEL/12ET152IT5L S2EB5C2 5H ESWBC O HUETWL4PDFI NO6ahuE0xoUrh 0nT(a9 eLSm4PDF1 Ii(N6alh9u9,i Ec0xo)rN1h o0n39(.an9 Ce1)Sm 1 3D3i(2l99-,i1Ar7 5c)N1i3v 75o39.-e05nC51)38 3 3D320-1Ar750i3v75-e05538300 ..XXX ± ± ..XX .17X . 55 ± ± .17.55 -- -- SIZESIZEDRAWDIRNAGW NINOG. NO. REV.REV. X.X° X X ± ± X. X °.. 5 2X ° 5X ± ± ..52°F5INAL FPIRNOATLE PCRTOIVTEE CFTINICVISEH FINCISH 2610-020601109-00019 D D SURFASCUER FFIAN1CI.S6EH F: IN1I.S6H: -- -- SCA30LS.E0C00A30L.E000 SHEESOTHFE1E/OT1F 1/1 6 6 5 5 4 4 3 3 2 2 1 1 Copyright © 2011-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 17

160.0 A B A SECTION A-A SCALE 2 : 1 6 5 4 3 2 1 N6OTICE 5 4 3 2 REVISONS 1 MCCCOUMCCCOUNOORFNOORAFA ENNA ECYNNACYEUEFT RUFT RN NI ACTEIACTDEDOHOIOEHIOEENETN OTN NIONENI NE BNRFTBDRFTDCEIINCIEII DZIA DZW. AW.O CEECLEELITODNI TODN ITII NPTHC NPPTHPIIFEIIEIEFAIENEAONRDOLRDT L RT SA,.RSA ,.H HMR OTRMROTREEHENEEAHNE AP W IP WT TIS TTRS WRIWHR IHORO POOPIIEIITNETDLTNTDL O TPHU OTPHU OOERTCOERTCOFNF ONEU OA EUA C PDC TCPNDTCNRR ROR ODOODEIEINE RNEE RTETT S,T SHD ,HDA IEAINEIENIRENSRNS C CYICTYICNT.N .L AL TFATFOONHONHOSSDRIDRIESESMMD D PPA A TLTLTDOOTOOIITO TO AEA N NNNTYAY IL B RABRABCE E VV CHAAADDNDDGEEEDDD C C PDARDAROETeETeSCHlSeHlCeKOCaOaREsRDsDIRTeIPEePEdE dTDA T VA IIIONMIONSNDNSOD A NAANSNNODOD DTEEO N LNDDOEBDDDOBCCRTYCCCTYAEE12N12D08/D0C//2/A/2A23E62T6T3/S/3E/1E/1JA/1J12A2L12PL1P 1 PP'D'D SCALE 2 : 1 CD CCHHAANNGGEEDD P POOCCKKEETT D DIMIMS TAON DIN TSOIDLEED DROCCAFN P82CO//3EC1/S/K11E28T IN BOTTOM VIEW D CHANGED POCKET DIM TO INSIDE DOCF P2O/C1/K1E8T IN BOTTOM VIEW D D XLamp® XB-D LEDD D TAPE AND REEL All Cree carrier tapes conform to EIA-481D, Automated Component Handling Systems Standard. C except as noted, all dimensions in mmC 1.50 +.10/-.00 C 1.50 +.10/-.00 C 4.00 ±.10 1.75 ±.10 4.00 ±.10 1.75 ±.10 2.00 ±.10 CATHODE SIDE B B 2.00 ±.10 CATHODE SIDE B B 2.60+/-0.1mm 4° 2 .60+/-0.1mm 4° 12.00 Nominal 12.1020. 3N0o Mmainxal 12.30 Max 4.0±.1 1.5±.1 10.25 ±.10 10.25 ±.10 8.0±.1 B 1.75±.10 88..0000 ± ±..1100 AANNOODDEE S SIIDDEE Cathode Side 5.50 ±.10 ..3300 ± ± . .11002.5±.1 BB B 5.50 ±.10 1.00 ±.10 1.00 ±.10 +.3 12.0 .0 2.05+/-0.1 2.05+/-0.1 SECTION B -B REFERENCE VENDOR PART NUMBER 020246 SEACTnIoONd Be - BSide REFERENCE VENDOR PART NUMBER 020246 2.60 +/-0.1 AA N1N1.o. o1 t1te0e0s ss :s:pprroocckkeett h hoolEele p NpititcDchh c cuummuulalattivivee t to±o±leler2raa.n6nc0ce e+ /-0.1 00..22mmmm (denoTTtHeHIdIRR DDb AyAN N+GG LaLEEn PdPR RcOMOTMUFTUiFJOISrONJOILONEcLDULERLDLLRLLCEIlRI ECEIMeISM EMRTSMX..F..X.SRTX..XX..X.XXXSH°°)EA XXXXXAH°°EIS EA EXX XXISO ENN XX XXTOC ±EN±± N T±± O X X±E± ±± ±±N ± O S EX XCEE ±±N SU E C TT RI T TE RIO F E H 1.O . .. .1. SM Hs .5 .5 ..12.1.72SIMNU °°5.51272E.N NU°°625E.e555A EN25555SAREINS5RNTSr5 WLNTA WL AHADEAFDERILRS: ISFLM ADCSA SEF eMADCASEDEPI SDE FPINPHRI F Ne.APHRAISN S T. AASANSTC APAERPPdCEAPT ERPPELT RTLRRWECER TE RRWECEOPE SCDC OPOSKCCF ROKNRNF RIINRNO IIFIFiVOINIOFFIDDDVrN1IO IAINIDDDN1 IABEINENeITE0BEEAAAISTE0LLDAAADSEL/YDLDDcHEY/YDTTT2H:CYTTT2:Ct.3EEE.Ti3EEETo/SI/TS1SIVT1VnI1IECI1ZITECZT CF A4ELFELI.CINLE0CNES0aEIaISr0SDTrrHDrHieiRAeRrrA TA RT2W2aWa4T4pp0Ie0Ie2N,2N ,-2 -0G20G5050 20 2N4PDF0SN54PDF256ah2u O6Hahu0H O0x0orH0xorh. EE0nh. (E0na(W9 eEaW9O SemS1 mT1 i(Fli(99,Ril99 ,RciD) N1cD)1N1 Eo 3E9o/.391n.CV1)nCVA1) A 3. 3D 23.3D2-1r7-51r75i3vi753v75-e05-5e0553833830000 6 5 4 3 SURFACE F1I.N6ISH: 2 SCA4.L00E0 SH1EEOTF1/1 6 5 4 3 2 1 Loaded Pockets Trailer Leader (1,000 Lamps) 160mm (min) of 400mm (min) of empty pockets empty pockets with sealed with tape at least 100mm (20 pockets min.) sealed by tape (50 empty pockets min.) User Feed Direction Cover Tape Pocket Tape 13mm 7" Copyright © 2011-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 18

XLamp® XB-D LED PACkAGING Unpackaged Reel Vacuum-Sealed MVaocuisutmu-rSee aBleadrrier Bag Moisture Barrier Bag CLRaEbEe Bli nw Ciotdhe Cree Bin &C oBadreco,d Qe Ltayb, eLlot # Label with Cree Bin Code, Quantity, Reel ID LLaabbeel wl iwthi tChu sCtormeeer Bin CP/oNd, Qet,y ,Q Lotyt ,# , LPoOt # # Packaged Reel Patent Label LLaabbeel lw iwthi tChus tComreere O Orderrd er Code, Code, Qty, Reel ID, PO # Quantity, Reel ID, PO # Label with Cree Bin Code, Quantity, Reel ID Boxed Reel Label with Cree Order Code, Quantity, Reel ID, PO # Label with Cree Bin Code, Quantity, Reel ID Patent Label (on bottom of box) Copyright © 2011-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 19