ICGOO在线商城 > WP73EB/2GDA
数量阶梯 | 香港交货 | 国内含税 |
+xxxx | $xxxx | ¥xxxx |
查看当月历史价格
查看今年历史价格
WP73EB/2GDA产品简介:
ICGOO电子元器件商城为您提供WP73EB/2GDA由Kingbright设计生产,在icgoo商城现货销售,并且可以通过原厂、代理商等渠道进行代购。 提供WP73EB/2GDA价格参考以及KingbrightWP73EB/2GDA封装/规格参数等产品信息。 你可以下载WP73EB/2GDA参考资料、Datasheet数据手册功能说明书, 资料中有WP73EB/2GDA详细功能的应用电路图电压和使用方法及教程。
参数 | 数值 |
产品目录 | |
描述 | LED 4.8MM BI-LEV 565NM GN DIFFLED 电路板指示器 Bi Green 568nm Diffused 20mcd |
产品分类 | |
LED大小 | 4.8 mm |
品牌 | Kingbright |
产品手册 | |
产品图片 | |
rohs | 符合RoHS无铅 / 符合限制有害物质指令(RoHS)规范要求 |
产品系列 | LED灯泡与模块,LED 指示,LED 电路板指示器,Kingbright WP73EB/2GDA- |
数据手册 | |
产品型号 | WP73EB/2GDA |
产品种类 | LED 电路板指示器 |
光强度 | 40 mcd |
包装 | 散装 |
商标 | Kingbright |
安装类型 | Through Hole |
封装 | Bulk |
工厂包装数量 | 900 |
显示角 | 60 deg |
标准包装 | 90 |
正向电压 | 2.2 V |
正向电流 | 20 mA |
毫烛光等级 | 40mcd |
波长 | 568 nm |
波长-峰值 | 565nm |
照明颜色 | Green (x 2) |
电流 | 25mA |
视角 | 60° |
透镜样式/尺寸 | 圆形,带圆顶,4.8mm |
透镜类型 | 散射,有色 |
配置 | 2 Single Color LEDs, Bi-Level |
颜色 | 绿 |
额定电压 | 2.2V |
4.8mm BI-LEVEL LED INDICATOR Part Number: WP73EB/2GDA Green Features Description (cid:122) Pre-trimmed leads for pc board mounting. The Green source color devices are made with Gallium (cid:122) Colors can be mixed in a single housing. Phosphide Green Light Emitting Diode. (cid:122) Black case enhances contrast ratio. (cid:122) Wide viewing angle. (cid:122) High reliability - life measured in years. (cid:122) Housing UL rating:94V-0. (cid:122) Housing material: type 66 nylon. (cid:122) RoHS compliant. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3. Lead spacing is measured where the leads emerge from the package. 4. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. SPEC NO: DSAF2084 REV NO: V.6B DATE: AUG/24/2015 PAGE: 1 OF 5 APPROVED: Wynec CHECKED: Allen Liu DRAWN: M.Liu ERP: 1102001994
Selection Guide Iv (mcd) [2] Viewing @ 10mA Angle [1] Part No. Emitting Color (Material) Lens Type Min. Typ. 2θ1/2 WP73EB/2GDA Green (GaP) Green Diffused 10 30 60° Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity / luminous Flux: +/-15%. 3. Luminous intensity value is traceable to the CIE127-2007 compliant national standards. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Emitting Color Typ. Max. Units Test Conditions λpeak Peak Wavelength Green 565 nm IF=10mA λD [1] Dominant Wavelength Green 568 nm IF=10mA Δλ1/2 Spectral Line Half-width Green 30 nm IF=10mA C Capacitance Green 15 pF VF=0V;f=1MHz VF [2] Forward Voltage Green 2 2.5 V IF=10mA IR Reverse Current Green 10 uA VR = 5V Notes: 1. Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. 3. Wavelength value is traceable to the CIE127-2007 compliant national standards. 4. Excess driving current and / or operating temperature higher than recommended conditions may result in severe light degradation or premature failure. Absolute Maximum Ratings at TA=25°C Parameter Values Units Power dissipation 62.5 mW DC Forward Current 25 mA Peak Forward Current [1] 140 mA Reverse Voltage 5 V Operating/Storage Temperature -40°C To +85°C Lead Solder Temperature [2] 260°C For 3 Seconds Lead Solder Temperature [3] 260°C For 5 Seconds Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. 2mm below package base. 3. 5mm below package base. SPEC NO: DSAF2084 REV NO: V.6B DATE: AUG/24/2015 PAGE: 2 OF 5 APPROVED: Wynec CHECKED: Allen Liu DRAWN: M.Liu ERP: 1102001994
Green WP73EB/2GDA SPEC NO: DSAF2084 REV NO: V.6B DATE: AUG/24/2015 PAGE: 3 OF 5 APPROVED: Wynec CHECKED: Allen Liu DRAWN: M.Liu ERP: 1102001994
PACKING & LABEL SPECIFICATIONS WP73EB/2GDA Terms and conditions for the usage of this document 1. The information included in this document reflects representative usage scenarios and is intended for technical reference only. 2. The part number, type, and specifications mentioned in this document are subject to future change and improvement without notice. Before production usage customer should refer to the latest datasheet for the updated specifications. 3. When using the products referenced in this document, please make sure the product is being operated within the environmental and electrical limits specified in the datasheet. If customer usage exceeds the specified limits, Kingbright will not be responsible for any subsequent issues. 4. The information in this document applies to typical usage in consumer electronics applications. If customer's application has special reliability requirements or have life-threatening liabilities, such as automotive or medical usage, please consult with Kingbright representative for further assistance. 5. The contents and information of this document may not be reproduced or re-transmitted without permission by Kingbright. 6. All design applications should refer to Kingbright application notes available at http://www.KingbrightUSA.com/ApplicationNotes SPEC NO: DSAF2084 REV NO: V.6B DATE: AUG/24/2015 PAGE: 4 OF 5 APPROVED: Wynec CHECKED: Allen Liu DRAWN: M.Liu ERP: 1102001994
SPEC NO: DSAF2084 REV NO: V.6B DATE: AUG/24/2015 PAGE: 5 OF 5 APPROVED: Wynec CHECKED: Allen Liu DRAWN: M.Liu ERP: 1102001994
Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: K ingbright: WP73EB/2GDA