VJ HVArc Guard® www.vishay.com Vishay Vitramon Surface Mount Multilayer Ceramic Chip Capacitors Prohibit Surface Arc-Over in High-Voltage Applications FEATURES For this Worldwide Patented Technology • Specialty: high-voltage applications • MLCC that protects against surface arc-over • Excellent high-voltage performance • Higher capacitances and smaller case sizes that save board space, as compared to standard high-voltage MLCCs Available • Voltage breakdowns as much as twice that of competitors’ products • Available with polymer termination for increase resistance to board flex cracking. Please contact factory for availability • Wet build process • Reliable Noble Metal Electrode (NME) system • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 APPLICATIONS • Power supplies • DC/DC converters (buck and boost) • Voltage multipliers for flyback converters • For lighting and other AC applications please contact: mlcc@vishay.com ELECTRICAL SPECIFICATIONS C0G (NP0) X7R   GENERAL SPECIFICATION GENERAL SPECIFICATION Note  Note  Electrical characteristics at +25 °C unless otherwise specified Electrical characteristics at +25 °C unless otherwise specified Operating Temperature: -55 °C to +125 °C Operating Temperature: -55 °C to +125 °C Capacitance Range: 10 pF to 8.2 nF Capacitance Range: 220 pF to 270 nF Voltage Range: 1000 V to 2500 V Voltage Range: 250 V to 1000 V DC DC DC DC Temperature Coefficient of Capacitance (TCC): Temperature Coefficient of Capacitance (TCC): 0 ppm/°C ± 30 ppm/°C from -55 °C to +125 °C ± 15 % from -55 °C to +125 °C, with 0 V applied DC Dissipation Factor (DF): Dissipation Factor (DF): 0.1 % maximum at 1.0 V and  2.5 % maximum at 1.0 V and 1 kHz RMS RMS 1 MHz for values  1000 pF 0.1 % maximum at 1.0 V and  Insulating Resistance: RMS 1 kHz for values > 1000 pF at +25 °C 100 000 M min. or 1000 F whichever is less at +125 °C 10 000 M min. or 100 F whichever is less Insulating Resistance: at +25 °C 100 000 M min. or 1000 F whichever is less Aging Rate: 1 % maximum per decade at +125 °C 10 000 M min. or 100 F whichever is less Dielectric Strength Test: Aging Rate: 0 % maximum per decade performed per method 103 of EIA 198-2-E. Applied test voltages Dielectric Strength Test:  250 V -rated: 200 % of rated voltage DC performed per method 103 of EIA 198-2-E. 500 V -rated: min. 150 % of rated voltage DC Applied test voltages 630 VDC, 1000 VDC-rated: min. 120 % of rated voltage 1000 VDC-rated: 150 % of rated voltage  1500 VDC, 2500 VDC-rated: 120 % of rated voltage  Revision: 25-May-2018 1 Document Number: 45197 For technical questions, contact: mlcc@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

VJ HVArc Guard® www.vishay.com Vishay Vitramon QUICK REFERENCE DATA MAXIMUM VOLTAGE CAPACITANCE DIELECTRIC CASE (V) MINIMUM MAXIMUM 0805 1500 10 pF 390 pF 1206 1500 10 pF 1.5 nF C0G (NP0) 1210 1500 10 pF 2.7 nF 2220 1500 470 pF 5.6 nF 2225 2500 470 pF 8.2 nF 0805 1000 470 pF 3.3 nF 1206 1000 220 pF 47 nF X7R 1210 1000 220 pF 82 nF 1808 1000 220 pF 100 nF 1812 1000 220 pF 270 nF Note • Detail ratings see “Selection Chart” ORDERING INFORMATION (4) VJ0805 A 101 J X G A T 5Z (2) CASE DIELECTRIC CAPACITANCE CAPACITANCE TERMINATION DC MARKING PACKAGING PROCESS CODE NOMINAL TOLERANCE (5) VOLTAGE CODE CODE RATING (1) 0805 A = C0G Expressed in J = ± 5 % X = Ni barrier P = 250 V A = 5Z = HVArc 1206 (NP0) picofarads (pF). K = ± 10 % 100 % matte tin E = 500 V unmarked Guard® 1210 Y = X7R The first two M = ± 20 % plate finish L = 630 V 1808 digits are F, E = AgPd (3) G = 1000 V 1812 significant, the B = polymer R = 1500 V 2220 third is a 100 % matte tin O = 2500 V 2225 multiplier. plate finish (4) Examples T = 7" reel / plastic tape 102 = 1000 pF R = 11 1/4" / 13" reel / plastic tape 223 = 22 000 pF Notes (1) DC voltage rating should not be exceeded in application. Other application factors may affect the MLCC performance.  Consult for questions: mlcc@vishay.com (2) Process code has to be added (3) Termination code “E” is for conductive epoxy assembly, contact mlcc@vishay.com for availability (4) Please contact factory for polymer termination availability (5) Other termination options contact mlcc@vishay.com for availability ENVIRONMENTAL STATUS TERMINATION CODE TERMINATION DESCRIPTION RoHS COMPLIANT VISHAY GREEN X Ni barrier 100 % tin plated matte finish Yes Yes E AgPd Yes Yes B Polymer layer, 100 % tin plated matte finish Yes No F AgPd Yes No Revision: 25-May-2018 2 Document Number: 45197 For technical questions, contact: mlcc@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

VJ HVArc Guard® www.vishay.com Vishay Vitramon DIMENSIONS in inches (millimeters) W L T MAX. P TERMINATION PAD CASE LENGTH WIDTH MAXIMUM (P) STYLE THICKNESS CODE (L) (W) (T) MINIMUM MAXIMUM 0.079 ± 0.008 0.049 ± 0.008 0805 VJ0805 0.057 (1.45) 0.010 (0.25) 0.030 (0.76) (2.00 ± 0.20) (1.25 ± 0.20) 0.126 ± 0.008 0.063 ± 0.008 1206 VJ1206 0.067 (1.70) 0.010 (0.25) 0.030 (0.76) (3.20 ± 0.20) (1.60 ± 0.20) 0.126 ± 0.008 0.098 ± 0.008 1210 VJ1210 0.067 (1.70) 0.010 (0.25) 0.030 (0.76) (3.20 ± 0.20) (2.50 ± 0.20) 0.180 ± 0.012 0.080 ± 0.010 1808 VJ1808 0.067 (1.70) 0.010 (0.25) 0.035 (0.90) (4.57 ± 0.30) (2.03 ± 0.25) 0.177 ± 0.012 0.126 ± 0.008 1812 VJ1812 0.086 (2.18) 0.010 (0.25) 0.035 (0.90) (4.50 ± 0.30) (3.20 ± 0.20) 0.220 ± 0.010 0.200 ± 0.010 2220 VJ2220 0.086 (2.18) 0.010 (0.25) 0.037 (0.95) (5.59 ± 0.25) (5.08 ± 0.25) 0.220 ± 0.010 0.250 ± 0.010 2225 VJ2225 0.090 (2.30) 0.010 (0.25) 0.037 (0.95) (5.59 ± 0.25) (6.35 ± 0.25) Note • Polymer (B-termination) have increased dimensions: part length increased by 0.006" (0.15 mm) Revision: 25-May-2018 3 Document Number: 45197 For technical questions, contact: mlcc@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

VJ HVArc Guard® www.vishay.com Vishay Vitramon SELECTION CHART C0G (NP0) DIELECTRIC C0G (NP0) STYLE VJ0805 VJ1206 (1) VJ1210 (1) VJ2220 (1) VJ2225 (1) CASE CODE 0805 1206 1210 2220 2225 VOLTAGE (V ) 1000 1500 1000 1500 1000 1500 1000 1500 1000 1500 2500 DC VOLTAGE CODE G R G R G R G R G R O CAP. CODE CAP. 100 10 pF • • • • • • 120 12 pF • • • • • • 150 15 pF • • • • • • 180 18 pF • • • • • • 220 22 pF • • • • • • 270 27 pF • • • • • • 330 33 pF • • • • • • 390 39 pF • • • • • • 470 47 pF • • • • • • 560 56 pF • • • • • • 680 68 pF • • • • • • 820 82 pF • • • • • • 101 100 pF • • • • • • 121 120 pF • • • • • • 151 150 pF • • • • • • 181 180 pF • • • • • • 221 220 pF • • • • • • 271 270 pF • • • • • • 331 330 pF • • • • • • 391 390 pF • • • • • • 471 470 pF • • • • • • • • • 561 560 pF • • • • • • • • • 681 680 pF • • • • • • • • • 821 820 pF • • • • • • • • • 102 1.0 nF • • • • • • • • • 122 1.2 nF • • • • • • • • • 152 1.5 nF • • • • • • • • • 182 1.8 nF • • • • • • • 222 2.2 nF • • • • • • • 272 2.7 nF • • • • • • • 332 3.3 nF • • • • • 392 3.9 nF • • • • • 472 4.7 nF • • • • • 562 5.6 nF • • • • • 682 6.8 nF • • • 822 8.2 nF • • • Notes (1) See soldering recommendations within this data book, or visit www.vishay.com/doc?45034 • Available in plastic carrier tape only RoHS-compliant Revision: 25-May-2018 4 Document Number: 45197 For technical questions, contact: mlcc@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

VJ HVArc Guard® www.vishay.com Vishay Vitramon SELECTION CHART X7R DIELECTRIC X7R STYLE VJ0805 VJ1206 (1) VJ1210 (1) VJ1808 (1) VJ1812 (1) CASE CODE 0805 1206 1210 1808 1812 VOLTAGE (V ) 630 1000 250 500 630 1000 250 500 630 1000 250 500 630 1000 250 500 630 1000 DC VOLTAGE CODE L G P E L G P E L G P E L G P E L G CAP. CODE CAP. 101 100 pF 121 120 pF 151 150 pF 181 180 pF 221 220 pF • • • • • • • • • • • • • • • • 271 270 pF • • • • • • • • • • • • • • • • 331 330 pF • • • • • • • • • • • • • • • • 391 390 pF • • • • • • • • • • • • • • • • 471 470 pF • • • • • • • • • • • • • • • • • • 561 560 pF • • • • • • • • • • • • • • • • • • 681 680 pF • • • • • • • • • • • • • • • • • • 821 820 pF • • • • • • • • • • • • • • • • • • 102 1.0 nF • • • • • • • • • • • • • • • • • • 122 1.2 nF • • • • • • • • • • • • • • • • • • 152 1.5 nF • • • • • • • • • • • • • • • • • • 182 1.8 nF • • • • • • • • • • • • • • • • • • 222 2.2 nF • • • • • • • • • • • • • • • • • • 272 2.7 nF • • • • • • • • • • • • • • • • • • 332 3.3 nF • • • • • • • • • • • • • • • • • • 392 3.9 nF • • • • • • • • • • • • • • • • 472 4.7 nF • • • • • • • • • • • • • • • • 562 5.6 nF • • • • • • • • • • • • • • • • 682 6.8 nF • • • • • • • • • • • • • • • • 822 8.2 nF • • • • • • • • • • • • • • • • 103 10 nF • • • • • • • • • • • • • • • • 123 12 nF • • • • • • • • • • • • • • • 153 15 nF • • • • • • • • • • • • • • • 183 18 nF • • • • • • • • • • • • • • • 223 22 nF • • • • • • • • • • • • • • • 273 27 nF • • • • • • • • • • • • • • 333 33 nF • • • • • • • • • • • • • • 393 39 nF • • • • • • • • • • • • • • 473 47 nF • • • • • • • • • • • • • • 563 56 nF • • • • • • • • 683 68 nF • • • • • • 823 82 nF • • • • • • 104 100 nF • • • • 124 120 nF • 154 150 nF • 184 180 nF • 224 220 nF • 274 270 nF • 334 330 nF Notes (1) See soldering recommendations within this data book, or visit www.vishay.com/doc?45034 • Available in plastic carrier tape only RoHS-compliant Revision: 25-May-2018 5 Document Number: 45197 For technical questions, contact: mlcc@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

VJ HVArc Guard® www.vishay.com Vishay Vitramon HVArc Guard® C0G (NP0) DIELECTRIC - TYPICAL PARAMETERS TEMPERATURE COEFFICIENT OF CAPACITANCE MINIMUM INSULATION RESISTANCE VS. TEMPERATURE 2.0 10 000 HANGE 11..50 STANCE 1000 E C 0.5 ESI CITANC -00..05 NP0 TION RΩ(F)100 A A AP -1.0 UL C S % -1.5 IN -2.0 10 -75 -50 -25 0 25 50 75 100 125 10 25 100 125 TEMPERATURE °C TEMPERATURE °C AGING RATE VOLTAGE COEFFICIENT OF CAPACITANCE 0.2 0.2 E G E N G HA 0.1 AN 0.1 C H CE E C AN 0.0 NC 0.0 T A ACI CIT P A A -0.1 P C A -0.1 % % C - 0.2 -0.2 1 10 100 1000 10 000 0 10 20 30 40 50 60 70 80 90 100 HOURS DC VOLTS APPLIED IMPEDANCE VS. FREQUENCY OF 1206 NP0 HVArc Guard® 1000 100 Ω) CE ( 10 470 pF N A 1000 pF D E 1 P M I 0.1 0.01 1 10 100 1000 FREQUENCY (MHz) Revision: 25-May-2018 6 Document Number: 45197 For technical questions, contact: mlcc@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

VJ HVArc Guard® www.vishay.com Vishay Vitramon HVArc Guard® X7R DIELECTRIC - TYPICAL PARAMETERS TEMPERATURE COEFFICIENT OF CAPACITANCE MINIMUM INSULATION RESISTANCE VS. TEMPERATURE 15 10 000 F) E 10 Ω NG E ( A 5 C CH AN 1000 E 0 ST ANC -5 RESI PACIT -10 TION 100 A A C L % -15 SU N -20 I 10 -100 -50 0 50 100 150 10 25 100 125 TEMPERATURE °C TEMPERATURE °C AGING RATE DISSIPATION FACTOR VS. TEMPERATURE 1.0 3.0 E R 2.5 G 0.0 O N T A C H A 2.0 C F E -1.0 N C O 1.5 AN ATI CIT -2.0 SIP 1.0 A S CAP -3.0 % DI 0.5 % 0 -4.0 -100 -50 0 50 100 150 1 10 100 1000 10 000 HOURS TEMPERATURE °C IMPEDANCE VS. FREQUENCY OF 1206 HVArc Guard® CAPACITORS 100 10 Ω) E ( ANC 1 33 nF 22 nF 15 nF D E P M I 0.1 0.01 1 10 100 1000 FREQUENCY (MHz) Revision: 25-May-2018 7 Document Number: 45197 For technical questions, contact: mlcc@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

VJ HVArc Guard® www.vishay.com Vishay Vitramon TYPICAL C0G (NP0) VOLTAGE BREAKDOWN TYPICAL X7R VOLTAGE BREAKDOWN TYPICAL C0G (NP0) VOLTAGE BREAKDOWN TYPICAL X7R VOLTAGE BREAKDOWN (n = 50, 500 V/s applied) (n = 50, 500 V/s applied) AVERAGE VOLTAGEBREAKDOWN (V)DC22222222223012345678900000000000000000000000 1000 V 1500 V AVERAGE VOLTAGE)BREAKDOWN (VDC112233 0505055 0000000 00000000 250 V HVArc Gu5a0r0d ®V HVA10rc0 0G Vuard®Competitor DC DC DC PART RATED VOLTAGE PART RATED VOLTAGE TYPICAL ARCING ON MLCCS (shown in polarized light) Crack caused by surface arc from end termination to top electrode Corona traces due to arc-over become conductive paths leading to layer cause component failure component failure APPLICATION NOTE • Suitable only for transient voltage and not for periodical pulse(s) chain • 1000 V rated parts are not suitable for AC / lighting applications above 220 V AC • 500 V and 630 V are not suitable for AC / lighting applications above 110 V AC • If further questions, please contact: mlcc@vishay.com STANDARD PACKAGING QUANTITIES (1)(2)(3) 7" REEL QUANTITIES 11 1/4" AND 13" REEL QUANTITIES CASE CODE TAPE SIZE PLASTIC TAPE PACKAGING CODE PLASTIC TAPE PACKAGING CODE “T” “R” 0805 8 mm 3000 10 000 1206 (4) 8 mm 2500 / 3000 10 000 1210 (4) 8 mm 2500 / 3000 10 000 1808 12 mm 2000 10 000 1812 12 mm 1000 4000 2220 12 mm 1000 n/a 2225 12 mm 500 n/a Notes (1) Vishay Vitramon uses embossed plastic carrier tape (2) 11 1/4" reel is standard for large quantities. 13" is maybe used for large “T” dimension parts (3) Reference: EIA standard RS 481 - “Taping of Surface Mount Components for Automatic Placement” (4) Packaging quantity can vary with product thickness Contact mlcc@vishay.com with respect to specific part number requirements STORAGE AND HANDLING CONDITIONS (1)Store the components at 5 °C to 40 °C ambient temperature and  70 % relative humidity conditions. (2)The product is recommended to be used within a time-frame of 2 years after shipment.  Check solderability in case extended shelf life beyond the expiry date is needed. Precautions: a. Do not store products in an environment containing corrosive elements, especially where chloride gas, sulfide gas, acid, alkali, salt or the like are present. This may cause corrosion or oxidization of the terminations, which can easily lead to poor soldering. b. Store products on the shelf and avoid exposure to moisture or dust. c. Do not expose products to excessive shock, vibration, direct sunlight and so on. Revision: 25-May-2018 8 Document Number: 45197 For technical questions, contact: mlcc@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROV E RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose o r the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustainin g applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk . Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this documen t or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2019 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 01-Jan-2019 1 Document Number: 91000

Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: V ishay: VJ1206A470JXGAT5Z VJ1210A220JXGAT5Z VJ0805A470JXRAC5Z VJ1210A470JXGAT5ZL VJ1206A100JXGAT5ZL VJ1206A220JXGAT5ZL VJ1210A222KBRAT5ZL