ALUMINUM ELECTROLYTIC CAPACITORS UZT 4.5mmL Chip Type, Wide Temperature Range UWT Chip type with 4.5mm height, operating over wide temperature range of –40 to +105°C. Smaller Designed for surface mounting on high density PC board. Applicable to automatic mounting machine fed with carrier tape. Compliant to the RoHS directive (2011/65/EU). UZT AEC-Q200 compliant. Please contact us for details. Smaller Specifications UZG Item Performance Characteristics Category Temperature Range –40 to +105°C Rated Voltage Range 6.3 to 50V Rated Capacitance Range 1 to 100µF Capacitance Tolerance ±20% at 120Hz, 20°C Leakage Current After 2 minutes' application of rated voltage at 20°C, leakage current is not more than 0.01CV or 3 (µA) , whichever is greater. Measurement frequency : 120Hz at 20°C Tangent of loss angle (tan δ) Rated voltage (V) 6.3 10 16 25 35 50 tan δ (MAX.) 0.38 0.32 0.20 0.16 0.14 0.14 Measurement frequency : 120Hz Rated voltage (V) 6.3 10 16 25 35 50 Stability at Low Temperature Impedance ratio Z–25°C / Z+20°C 6 5 3 3 3 3 ZT / Z20 (MAX.) Z–40°C / Z+20°C 10 10 6 6 4 4 The specifications listed at right shall be Capacitance Within ±25% of the initial capacitance value (16V or less) met when the capacitors are restored to change Within ±20% of the initial capacitance value (25V or more) Endurance 20°C after the rated voltage is applied for tan δ 300% or less than initial specified value 1000 hours at 105°C. Leakage current Less than or equal to the initial specified value After storing the capacitors under no load at 105°C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 Shelf Life clause 4.1 at 20°C, they shall meet the specified values for the endurance characteristics listed above. The capacitors are kept on a hot plate for 30 seconds, which Capacitance change Within ±10% of the initial capacitance value Resistance to soldering is maintained at 250°C. The capacitors shall meet the heat characteristic requirements listed at right when they are tan δ Less than or equal to the initial specified value removed from the plate and restored to 20°C. Leakage current Less than or equal to the initial specified value Marking Black print on the case top. Chip Type Type numbering system (Example : 16V 10µF) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 Positive 105˚C Marking U Z T 1 C 1 0 0 M C L 1 G B Capacitance Plastic platform X. Lot No. Voltage 0.3MAX. C±0.2 MA Taping code 0.5 (mm) Configuration A2P1016V D±0.5φ B±0.2 ±±A0.3A0.3E CABEφD14414....8330 25515....1333 26626.....46623 CapaRcaittaendcR ceaa ttpoealdec rviatoanlntcacege e( (± 1(21006µ%VF))) 4.5+–00..21 0.5 to 0.8 Series name Voltage mark for 6.3V is 6V . Negative Type Dimensions V 6.3 10 16 25 35 50 Cap. (µF) Code 0J 1A 1C 1E 1V 1H 1 010 4 5.4 2.2 2R2 4 9.6 3.3 3R3 4 12 4.7 4R7 4 11 4 13 5 16 10 100 4 16 5 20 5 22 6.3 26 22 220 4 19 5 24 5 26 6.3 33 6.3 36 33 330 5 26 5 30 6.3 35 6.3 42 47 470 5 32 6.3 40 6.3 44 100 101 6.3 52 CφaDs(em smiz)e Rripapteled Rated ripple current (mArms) at 105°C 120Hz Taping specifications are given in page 23. Recommended land size, soldering by reflow are given in page 18, 19. Frequency coefficient of rated ripple current Please select UUX(p.158), UUJ(p.164) series if high C/ Frequency 50 Hz 120 Hz 300 Hz 1 kHz 10 kHz or more V products are reqired. Coefficient 0.70 1.00 1.17 1.36 1.50　　 Please refer to page 3 for the minimum order quantity. 111 CAT.8100H

Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: N ichicon: UZS1V4R7MCL1GB UZT1H100MCL1GB UZT1V100MCL1GB UZT1V220MCL1GB UZT0J101MCL1GB UZT0J220MCL1GB UZT0J330MCL1GB UZT0J470MCL1GB UZT1A220MCL1GB UZT1A330MCL1GB UZT1A470MCL1GB UZT1C100MCL1GB UZT1C220MCL1GB UZT1C330MCL1GB UZT1C470MCL1GB UZT1E100MCL1GB UZT1E220MCL1GB UZT1E330MCL1GB UZT1E4R7MCL1GB UZT1H010MCL1GB UZT1H0R1MCL1GB UZT1H2R2MCL1GB UZT1H3R3MCL1GB UZT1H4R7MCL1GB UZT1HR22MCL1GB UZT1HR33MCL1GB UZT1HR47MCL1GB UZT1V4R7MCL1GB