ALUMINUM ELECTROLYTIC CAPACITORS UZS 4.5mmL Chip Type Chip type with 4.5mm height. UWX Designed for surface mounting on high density PC board. Smaller Applicable to automatic mounting machine fed with carrier tape. Compliant to the RoHS directive (2011/65/EU). AEC-Q200 compliant. Please contact us for details. UZT High UZS Temperature Smaller Specifications UZR Item Performance Characteristics Category Temperature Range –40 to + 85°C Rated Voltage Range 4 to 50V Rated Capacitance Range 1 to 220µF Capacitance Tolerance + –20% at 120Hz, 20°C Leakage Current After 2 minutes' application of rated voltage at 20°C, leakage current is not more than 0.01 CV or 3 (µA) ,whichever is greater. Measurement frequency : 120Hz at 20°C Tangent of loss angle (tan δ) Rated voltage (V) 4 6.3 10 16 25 35 50 tan δ (MAX.) 0.50 0.30 0.24 0.19 0.16 0.14 0.14 Measurement frequency : 120Hz Rated voltage (V) 4 6.3 10 16 25 35 50 Stability at Low Temperature Impedance ratio Z–25°C / Z+20°C 7 4 3 2 2 2 2 ZT / Z20 (MAX.) Z–40°C / Z+20°C 15 8 8 4 4 3 3 The specifications listed at right shall be met when Capacitance change Within + –20% of the initial capacitance value Endurance the capacitors are restored to 20°C after the rated tan δ 200% or less than the initial specified value voltage is applied for 2000 hours at 85°C. Leakage current Less than or equal to the initial specified value After storing the capacitors under no load at 85°C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 Shelf Life clause 4.1 at 20°C, they shall meet the specified values for the endurance characteristics listed above. Resistance to soldering Tmhaein ctaaipnaecdit oart s2 a5r0e° Cke. pTth oen c aa phaocti tpolrast es hfoarl l3 m0 eseetc tohned s, which is Capacitance change Within +– 10% of the initial capacitance value tan δ Less than or equal to the initial specified value heat characteristic requirements listed at right when they are removed from the plate and restored to 20°C. Leakage current Less than or equal to the initial specified value Marking Black print on the case top. Chip Type Type numbering system (Example : 16V 10µF) Positive 1 2 3 4 5 6 7 8 9 10 11 12 13 14 Capacitance Plastic platform X. U Z S 1 C 1 0 0 M C L 1 G B Lot No. Voltage 0.3MAX. C±0.2 MA 0.5 Taping code (mm) Configuration A21016V D±0.5φ B±0.2 EA±0.3A±0.3 φCABED 14414....8330 25515....1333 62662.....34662 CapaRcaittaendcR ceaa ttpoealdec rviatoanlnctacege (e +(– 1(21006µ%VF))) 4.5+–00..21 0.5 to 0.8 Negative Series name Voltage mark for 6.3V is 6V . Type Dimensions V 4 6.3 10 16 25 35 50 Cap. (µF) Code 0G 0J 1A 1C 1E 1V 1H 1 010 4 8.4 2.2 2R2 4 13 3.3 3R3 4 17 4.7 4R7 4 16 4 18 5 20 10 100 4 23 5 27 5 29 6.3 33 22 220 4 28 5 33 5 37 6.3 42 6.3 46 33 330 4 28 5 37 5 41 6.3 49 6.3 52 47 470 4 33 5 45 6.3 52 6.3 58 100 101 5 56 6.3 70 220 221 6.3 96 CφaDs(em smiz)e Rripapteled Rated ripple current (mArms) at 85°C 120Hz Taping specifications are given in page 23. Recommended land size, soldering by reflow are given in page 18, 19. Frequency coefficient of rated ripple current Please select UUR(p.156), UUG(p.162) if high C/V Frequency 50 Hz 120 Hz 300 Hz 1 kHz 10 kHz or more products are reqired. Coefficient 0.70 1.00 1.17 1.36 1.50　　 Please refer to page 3 for the minimum order quantity. 110 CAT.8100H

Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: N ichicon: UZS0J220MCL1GB UZS1E220MCL1GB UZS1H0R1MCL1GB UZR1V4R7MCL1GB UZS0G330MCL1GB UZS0G470MCL1GB UZS0G101MCL1GB UZS0G221MCL1GB UZS0J330MCL1GB UZS0J470MCL1GB UZS0J101MCL1GB UZS1A220MCL1GB UZS1A330MCL1GB UZS1A470MCL1GB UZS1C100MCL1GB UZS1C220MCL1GB UZS1C330MCL1GB UZS1C470MCL1GB UZS1E4R7MCL1GB UZS1E100MCL1GB UZS1E330MCL1GB UZS1V100MCL1GB UZS1V220MCL1GB UZS1HR22MCL1GB UZS1HR33MCL1GB UZS1HR47MCL1GB UZS1H010MCL1GB UZS1H2R2MCL1GB UZS1H3R3MCL1GB UZS1H4R7MCL1GB UZS1H100MCL1GB