ALUMINUM  ELECTROLYTIC  CAPACITORS ZE 3.95mmL MAX. Chip Type, Bi-polarized series Chip type with 3.95mmL MAX, height. Designed for surface mounting on high density PC board. Applicable to automatic mounting machine fed with carrier tape. ZP Compliant to the RoHS directive (2011/65/EU). Smaller Products which are scheduled to be discontinued. Not recommended for new designs ZE Specifications Item Performance Characteristics Category Temperature Range –40 to +85°C Rated Voltage Range 6.3 to 50V Rated Capacitance Range 0.1 to 47µF Capacitance Tolerance ±20% at 120Hz, 20°C Leakage Current After 2 minutes' application of rated voltage, leakage current is not more than 0.05 CV or 10 (µA) , whichever is greater. Measurement frequency : 120Hz at 20°C Tangent of loss angle (tan δ) Rated voltage (V) 6.3 10 16 25 35 50 tan δ (MAX.) 0.30 0.24 0.20 0.18 0.16 0.16 Measurement frequency : 120Hz Rated voltage (V) 6.3 10 16 25 35 50 Stability at Low Temperature Impedance ratio Z–25°C / Z+20°C 4 3 2 2 2 2 ZT / Z20 (MAX.) Z–40°C / Z+20°C 8 8 4 4 3 3 The specifications listed at right shall be met when Capacitance change Within ±30% of the initial capacitance value Endurance the capacitors are restored to 20°C after the rated tan δ 300% or less than the initial specified value voltage is applied for 1000 hours at 85°C with the Leakage current Less than or equal to the initial specified value polarity inverted every 250 hours. After storing the capacitors under no load at 85°C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 Shelf Life clause 4.1 at 20°C, they shall meet the specified values for the endurance characteristics listed above. The capacitors are kept on a hot plate for 30 seconds, which Capacitance change Within ±10% of the initial capacitance value Resistance to soldering is maintained at 250°C. The capacitors shall meet the heat characteristic requirements listed at right when they are tan δ Less than or equal to the initial specified value removed from the plate and restored to 20°C. Leakage current Less than or equal to the initial specified value Marking Black print on the case top. Chip Type Type numbering system (Example : 16V 10µF) Voltage (C : 16V) Plastic platform AX. Lot No. Series 0.3MAX. C±0.2 5M 1 2 3 4 5 6 7 8 9 10 11 12 13 14 0. U Z E 1 C 1 0 0 MC L 1 G B 3 0. A210CZE D±0.5φ B±0.2 E ±0.3 A± φD 4 5 (6m.3m) Capacitance toleCraTonancpfeiign (ug±r 2cao0tido%en) Capacitance 3.90+–00..205 A AB 14..83 25..13 26..46 Rated capacitance (10µF) 0.5 to 0.8 C 4.3 5.3 6.6 Rated voltage (16V) Voltage E 1.0 1.3 2.2 V 6.3 10 16 25 35 50 Series name Code j A C E V H Type Dimensions V 6.3 10 16 25 35 50 Cap. (µF) Code 0J 1A 1C 1E 1V 1H       0.1 0R1 4 1.0       0.22 R22 4 2.0       0.33 R33 4 2.8       0.47 R47 4 4.0       1 010 4 8.4       2.2 2R2 4 8.4 5 13       3.3 3R3 5 12 5 16 5 17       4.7 4R7 4 12 5 16 5 18 6.3 20     10 100 4 17 5 23 6.3 27 6.3 29     22 220 5 28 6.3 33 6.3 37     33 330 6.3 37 6.3 41 6.3 49     47 470 6.3 45 CφaDs(em smiz)e Rripapteled Rated ripple current (mArms) at 85°C 120Hz Frequency coefficient of rated ripple current Taping specifications are given in page 23.  Recommended land size soldering by reflow are given Frequency 50 Hz 120 Hz 300 Hz 1 kHz 10 kHz or more in page 18,19. Coefficient 0.70 1.00 1.17 1.36 1.50 Please refer to page 3 for the minimum order quantity. CAT.8100D