ALUMINUM ELECTROLYTIC CAPACITORS UWX 5.5mmL Chip Type Chip type with 5.5mm height. Designed for surface mounting on high density PC board. Applicable to automatic mounting machine fed with carrier tape. Load life of 2000 hours at 85°C. Compliant to the RoHS directive (2011/65/EU,(EU)2015/863). UWT UWJ AEC-Q200 compliant. Please contact us for details. High High Temperature Temp reflow UWX Bi-polarized UWP Smaller Specifications UZS Item Performance Characteristics Category Temperature Range –40 to +85°C Rated Voltage Range 4 to 50V Rated Capacitance Range 1 to 330µF Capacitance Tolerance ±20% at 120Hz, 20°C Leakage Current After 2 minutes' application of rated voltage at 20°C, leakage current is not more than 0.01CV or 3 (µA) ,whichever is greater. Measurement frequency : 120Hz at 20°C Tangent of loss angle (tan δ) Rated voltage (V) 4 6.3 10 16 25 35 50 tan δ (MAX.) 0.35 (0.40) 0.26 (0.30) 0.20 (0.24) 0.16 (0.19) 0.14 (0.16) 0.12 (0.14) 0.12 (0.14) Values in ( ) applicable to WR. Measurement frequency : 120Hz Rated voltage (V) 4 6.3 10 16 25 35 50 Stability at Low Temperature Impedance ratio Z–25°C / Z+20°C 7 4 3 2 2 2 2 ZT / Z20 (MAX.) Z–40°C / Z+20°C 15 8 8 4 4 3 3 The specifications listed at right shall be met Capacitance change Within ±20% of the initial capacitance value (Within ±25% for 4 V and WR series units) when the capacitors are restored to 20°C after Endurance tan δ 200% or less than the initial specified value the rated voltage is applied for 2000 hours at 85°C. Leakage Current Less than or equal to the initial specified value After storing the capacitors under no load at 85°C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 Shelf Life clause 4.1 at 20°C, they shall meet the specified values for the endurance characteristics listed above. The capacitors are kept on a hot plate for 30 seconds, which is Capacitance change Within ±10% of the initial capacitance value Resistance to soldering maintained at 250°C. The capacitors shall meet the tan δ Less than or equal to the initial specified value heat characteristic requirements listed at right when they are removed from the plate and restored to 20°C. Leakage current Less than or equal to the initial specified value Marking Black print on the case top. Chip Type Type numbering system (Example : 16V 10µF) Capacitance Positive 1 2 3 4 5 6 7 8 9 10 11 12 13 14 LC2o aLtp oNat ocN.itoa.nA2X2ce101016V16V11 VVoollttaaD±0.5φD0.5φggee PPllaass5tti.ic4c0 .pp3+–l0l0aMa..21ttAffooXrr.m0m.3MAX.0B±0.2B0.2.5 to 0.8CC±00.2.2 0.5MAX.0.5MAX.EA±0.2A±0.2EPosiA0.2 A0.2tive UU1 WW2 XX3 114 CC5 116 007 008 MM9CCC1a0RpaacLtL1eit1Radn acc11t1aee2p dtao GCGvc1leo3oitrlanatanfnBB1iCggcc4eea uR( p r2((a1aa10tc6t0%ieioVFtdan)))Rn ccaaetp4 eta oφdt3cloD eCvi rtTT8ooaaaalnnntpSpacfciiieigngenz egCu eg((±1 r o(ccac21210dooot06µidedod%VFeene))) 5.4+–00..21 Negative Series name Series name 0.5 to 0.8 Negative (mm) Type Type φD 4 5 6.3(m8m) φDA3 14.8 25.1 26..43 3.83 A B1.5 41..38 52..31 62..64 83..33 B C3.3 44..33 55..33 66..66 88..33 C E3.3 14..03 15..33 26..26 28..33 1. Voltage mark for 6.3V is 6V . E 0.8 1.0 1.3 2.2 2.3 1. Voltage mark for 6.3V is 6V . Dimension table in next page. 124

ALUMINUM ELECTROLYTIC CAPACITORS UWX Dimensions V 4 6.3 10 16 25 35 50 Cap. (µF) Code 0G 0J 1A 1C 1E 1V 1H 1 010 4 8.4 2.2 2R2 4 13 3.3 3R3 4 17 4.7 4R7 4 16 4 18 5 20 (18) 10 100 4 23 5 27 (24) 5 29 (24) 6.3 33 (30 ) 22 220 0 4 28 5 33 (30) 5 37 (30) 6.3 42 (38) 6.3 46 (39) 8 52 (43) 33 330 4 028 5 37 (34) 5 41 (34) 6.3 49 (44) 6.3 52 (46) 8 62 (53) 8 71 47 470 4 033 5 45 (40) 6.3 52 (47) 6.3 58 (52) 8 70 (60) 8 80 56 560 5 042 6.3 52 (46) 6.3 57 (50) 6.3 63 (57) 8 76 (65) 100 101 5 056 6.3 70 (47) 6.3 76 (54) 6.3 86 8 110 150 151 6.3 079 6.3 71 8 111 (76) 220 221 6.3 096 8 110 (74) 8 135 Case size Rated φD(mm) ripple 330 331 8 145 8 170 Size φ4 is available for capacitors marked. " " } In such a case, WR will be put at 2nd and 3rd digit of Rated ripple current (mArms) at 85°C 120Hz Size φ5 is available for capacitors marked. " " type numbering system. ( ) = UWR Size φ6.3 is available for capacitors marked. " " Frequency coefficient of rated ripple current Frequency 50 Hz 120 Hz 300 Hz 1 kHz 10 kHz or more Coefficient 0.70 1.00 1.17 1.36 1.50　　 Taping specifications are given in page 23. Recommended land size, soldering by reflow are given in page 18, 19. Please select UUR(p.168), UUG(p.174) if high C/V products are reqired. Please refer to page 3 for the minimum order quantity. 125