ALUMINUM ELECTROLYTIC CAPACITORS UWS Chip Type, High CV High Temperature (260°C) Reflow Corresponding with 260°C peak reflow soldering Recomended reflow condition : 260°C peak 5 sec. 230°C over 60 sec. 2 times (φ8 × 6.2, φ10 × 10 : 1 time) Chip type higher capacitance in large case size. UWS Applicable to automatic mounting machine fed with carrier tape. Compliant to the RoHS directive (2011/65/EU). High Products which are scheduled to be discontinued. Temperature Not recommended for new designs Reflow UUR Specifications Item Performance Characteristics Category Temperature Range –40 to +85°C Rated Voltage Range 6.3 to 50V Rated Capacitance Range 22 to 1500µF Capacitance Tolerance ±20% at 120Hz, 20°C Leakage Current After 1 minute's application of rated voltage, leakage current is not more than 0.03CV (µA) . Measurement frequency : 120Hz at 20°C Tangent of loss angle (tan δ) Rated voltage (V) 6.3 10 16 25 35 50 tan δ (MAX.) 0.28 0.24 0.20 0.16 0.14 0.12 Measurement frequency: 120Hz Rated voltage (V) 6.3 10 16 25 35 50 Stability at Low Temperature Impedance ratio Z–25°C / Z+20°C 5 4 3 2 2 2 ZT / Z20 (MAX.) Z–40°C / Z+20°C 10 8 6 4 3 3 The specifications listed at right shall be met when Capacitance change Within ±20% of the initial capacitance value Endurance the capacitors are restored to 20°C after the rated tan δ 200% or less than the initial specified value voltage is applied for 2000 hours at 85°C. Leakage current Less than or equal to the initial specified value After storing the capacitors under no load at 85°C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 Shelf Life clause 4.1 at 20°C, they shall meet the specified values for the endurance characteristics listed above. The capacitors are kept on a hot plate for 30 seconds, Capacitance change Within ±10% of the initial capacitance value Resistance to soldering which is maintained at 250°C. The capacitors shall meet heat the characteristic requirements listed at right when they tan δ Less than or equal to the initial specified value are removed from the plate and restored to 20°C. Leakage current Less than or equal to the initial specified value Marking Black print on the case top. Chip Type Type numbering system (Example : 10V 100µF) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 (φ6.3, φ8 × 6.2) UWS 1 A 1 0 1 M C L 1G S Positive Plastic platform X. Voltage (A:10V) Series 0.3MAX. C±0.2 MA Package code 0.5 Configuration Tra1de mark A2100AWS φD±0.5 B±0.2 A±0.2A±0.2E CapRaactietadn ccRaeap ttaeocdleit ravaonnlctcaeeg ( e(1± 0(21000μ%VF))) Lot No. Capacitance L±0.3 H Series name Negative 1 Size φ8 × 6.2 only Type (mm) (φ8 × 10, φ10 × 10) φ D×L 6.3 × 5.8 6.3 × 7.7 8 × 6.2 8 × 10 10 × 10 A 2.4 2.4 3.3 2.9 3.2 Positive B 6.6 6.6 8.3 8.3 10.3 Voltage (V:35V) Series Plasti0c. 3pMlaAtfoXr.m C±0.2 0.5MAX. CE 62..62 62..62 82..33 83..31 140..53 L 5.8 7.7 6.2 10 10 Trade mark A2100VWS φD±0.5 B±0.2 A±0.2A±0.2E H 0.5 to 0.8 0.5 to 0.8 0.5 to 0.8 0.8 to 1.1 0.8 to 1.1 Lot No. Capacitance L±0.5 H Negative Voltage V 6.3 10 16 25 35 50 Code j A C E V H Dimension table in next page. 150 CAT.8100E

ALUMINUM ELECTROLYTIC CAPACITORS UWS Dimensions V 6.3 10 16 25 35 50 Cap. (µF) Code 0J 1A 1C 1E 1V 1H 22 220 6.3 × 5.8 045 33 330 6.3 × 5.8 055 8 × 6.2 095 47 470 6.3 × 5.8 065 8 × 6.2 105 8 × 10 140 100 101 6.3 × 5.8 070 8 × 6.2 125 8 × 6.2 145 8 × 10 175 10 × 10 195 150 151 6.3 × 5.8 085 6.3 × 7.7 151 8 × 10 192 8 × 10 214 10 × 10 238 220 221 8 × 6.2 160 8 × 6.2 175 8 × 10 215 10 × 10 250 10 × 10 265 10 × 10 289 330 331 8 × 6.2 190 8 × 10 240 8 × 10 270 10 × 10 305 10 × 10 324 470 471 8 × 10 265 8 × 10 290 10 × 10 330 10 × 10 393 680 681 8 × 10 318 10 × 10 374 10 × 10 396 1000 102 10 × 10 400 10 × 10 454 Case size Rated 1500 152 10 × 10 489 φD × L (mm) ripple Rated ripple current (mArms) at 85°C 120Hz Frequency coefficient of rated ripple current Cap.(µF) Frequency 50 Hz 120 Hz 300 Hz 1 kHz 10 kHz or more 00 Less than 47V 0.80 1.00 1.15 1.40 1.67 100 to 1500 0.85 1.00 1.08 1.20 1.30 Taping specifications are given in page 23. Recommended land size, soldering by reflow are given in page 18, 19. Please refer to page 3 for the minimum order quantity. 151 CAT.8100E