ALUMINUM ELECTROLYTIC CAPACITORS UWP 5.5mmL Chip Type, Bi-Polarized Designed for surface mounting on high density PC board. Applicable to automatic mounting machine fed with carrier tape. Compliant to the RoHS directive (2011/65/EU). AEC-Q200 compliant. Please contact us for details. UWP UWX Bi-polarized Specifications Item Performance Characteristics Category Temperature Range –40 to +85°C Rated Voltage Range 6.3 to 50V Rated Capacitance Range 0.1 to 100µF Capacitance Tolerance ±20% at 120Hz, 20°C Leakage Current After 2 minutes' application of rated voltage at 20°C, leakage current is not more than 0.05CV or 10 (µA) ,whichever is greater. Measurement frequency : 120Hz at 20°C Tangent of loss angle (tan δ) Rated voltage (V) 6.3 10 16 25 35 50 tan δ (MAX.) 0.24 0.20 0.17 0.17 0.15 0.15 Measurement frequency : 120Hz Rated voltage (V) 6.3 10 16 25 35 50 Stability at Low Temperature Impedance ratio Z–25°C / Z+20°C 4 3 2 2 2 2 ZT / Z20 (MAX.) Z–40°C / Z+20°C 8 6 4 4 3 3 The specifications listed at right shall be met Capacitance change Within ±20% of the initial capacitance value when the capacitors are restored to 20°C after the Endurance tan δ 200% or less than the initial specified value rated voltage is applied for 1000 hours at 85°C with the polarity inverted every 250 hours. Leakage current Less than or equal to the initial specified value After storing the capacitors under no load at 85°C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 Shelf Life clause 4.1 at 20°C, they shall meet the specified values for the endurance characteristics listed above. The capacitors are kept on a hot plate for 30 seconds, which Capacitance change Within ±10% of the initial capacitance value Resistance to soldering is maintained at 250°C. The capacitors shall meet the heat characteristic requirements listed at right when they are tan δ Less than or equal to the initial specified value removed from the plate and restored to 20°C. Leakage current Less than or equal to the initial specified value Marking Black print on the case top. Chip Type Type numbering system (Example : 16V 10µF) Capacitance Plastic platform AX. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 Lot No. Voltage 0.3MAX. C±0.2 5M UWP 1 C 1 0 0 M C L 1 G B 0. A21016V D±0.5φ B±0.2 EA±0.2A±0.2 Capacitance tolerCaTonancpfeiign (ug±r 2ac0toi%odne) 5.4+–00..21 0.5 to 0.8 (mm) Rated capacitance (10µF) Voltage mark for 6.3V is 6V . φD 4 5 6.3 8 Rated voltage (16V) A 1.8 2.1 2.4 3.3 B 4.3 5.3 6.6 8.3 Series name C 4.3 5.3 6.6 8.3 Type Dimensions E 1.0 1.3 2.2 2.3 V 6.3 10 16 25 35 50 Cap. (µF) Code 0J 1A 1C 1E 1V 1H 0.1 0R1 4 1.0 0.22 R22 4 2.0 0.33 R33 4 2.8 0.47 R47 4 4.0 1 010 4 8.4 2.2 2R2 4 8.4 5 13 3.3 3R3 5 12 5 16 5 17 4.7 4R7 4 12 5 16 5 18 6.3 20 10 100 4 17 5 23 6.3 27 6.3 29 8 36 22 220 5 28 6.3 33 6.3 37 8 50 8 54 33 330 6.3 37 6.3 41 6.3 49 8 61 Allowable 47 470 6.3 45 8 61 8 75 rippRleated 100 101 8 82 CφaDs(em smiz)e ripple Rated ripple current (mArms) at 85°C 120Hz Frequency coefficient of rated ripple current Taping specifications are given in page 23. Frequency 50 Hz 120 Hz 300 Hz 1 kHz 10 kHz or more Recommended land size, soldering by reflow are given in page 18, 19. Coefficient 0.70 1.00 1.17 1.36 1.50　　 Please select UUN(p.166) if high C/V products are reqired. Please refer to page 3 for the minimum order quantity. 120 CAT.8100H

Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: N ichicon: UWP0J101MCL1GB UWP0J220MCL1GB UWP0J330MCL1GB UWP0J470MCL1GB UWP1A100MCL1GB UWP1A220MCL1GB UWP1A330MCL1GB UWP1A470MCL1GB UWP1C100MCL1GB UWP1C220MCL1GB UWP1C330MCL1GB UWP1C470MCL1GB UWP1C4R7MCL1GB UWP1E100MCL1GB UWP1E220MCL1GB UWP1E330MCL1GB UWP1E3R3MCL1GB UWP1E4R7MCL1GB UWP1H010MCL1GB UWP1H0R1MCL1GB UWP1H100MCL1GB UWP1H2R2MCL1GB UWP1H3R3MCL1GB UWP1H4R7MCL1GB UWP1HR22MCL1GB UWP1HR33MCL1GB UWP1HR47MCL1GB UWP1V100MCL1GB UWP1V220MCL1GB UWP1V2R2MCL1GB UWP1V3R3MCL1GB UWJ1V4R7MCL1GB