ALUMINUM ELECTROLYTIC CAPACITORS UWH Chip Type, High Reliability High Temperature (260°C) Reflow Corresponding with 260°C peak reflow soldering UWH Recomended reflow condition : 260°C peak 5 sec. 230°C over 60 sec. 2 times (φ8 × 6.2, φ10 × 10 : 1 time) Chip type high temperature range, for +125°C use. High Applicable to automatic mounting machine fed with carrier tape. Temperature Compliant to the RoHS directive (2011/65/EU). Reflow AEC-Q200 compliant. Please contact us for details. UUB Specifications Item Performance Characteristics Category Temperature Range –40 to +125°C Rated Voltage Range 10 to 50V Rated Capacitance Range 10 to 330µF Capacitance Tolerance ±20% at 120Hz, 20°C Leakage Current After 1 minute's application of rated voltage at 20°C, leakage current is not more than 0.03CV or 4(µA) , whichever is greater. Measurement frequency : 120Hz at 20°C Tangent of loss angle (tan δ) Rated voltage (V) 10 16 25 35 50 tan δ (MAX.) 0.32 0.24 0.21 0.18 0.18 Measurement frequency : 120Hz Rated voltage (V) 10 16 25 35 50 Stability at Low Temperature Impedance ratio ZT / Z20 (MAX.) Z–40°C / Z+20°C 12 8 6 4 4 The specifications listed at right shall be met when Capacitance change Within ±30% of the initial capacitance value Endurance the capacitors are restored to 20°C after the rated tan δ 300% or less than the intial specified value voltage is applied for 1000 hours at 125°C. Leakage current Less than or equal to the initial specified value After storing the capacitors under no load at 125°C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 Shelf Life clause 4.1 at 20°C, they shall meet the specified values for the endurance characteristics listed above. The capacitors are kept on a hot plate for 30 seconds, which is Resistance to soldering maintained at 250°C. The capacitors shall meet the characteristic Capacitance change Within ±10% of the initial capacitance value heat requirements listed at right when they are removed from the plate tan δ Less than or equal to the initial specified value and restored to 20°C. Leakage current Less than or equal to the initial specified value Marking Black print on the case top. Chip Type Type numbering system (Example : 10V 100µF) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 (φ8 × 6.2) Positive UWH 1 A 1 0 1 M C L 1 G S Plastic platform X. Voltage (A:10V) Series 0.3MAX. C±0.2 MA 0.5 Package code Trade mark A2100AWH D±0.5φ B±0.2 A±0.2A±0.2E CRaaptaecdit acnacpea tcoilteCarnaocnnecfei g( 1(u±0r2a00tµi%oFn)) L±0.3 H Rated voltage (10V) Lot No. Capacitance Negative Series name Type (φ8 × 10,φ10) Positive (mm) Voltage (V:35V) Series P0.la3sMtiAc Xp.latform C±0.2 0.5MAX. AB φD × L 8 ×38 ..633.2 8 28×.. 1930 1013 0×.2. 130 Trade mark A2100VWH D±0.5φ B±0.2 A±0.2A±0.2E CHEL 0.5826 t...o332 0.8 0.883 1t..o031 1.1 0.814 10t.o0.53 1.1 L±0.5 H Negative Lot No. Capacitance Voltage V 10 16 25 35 50 Code A C E V H Dimension table in next page. 145 CAT.8100H

ALUMINUM ELECTROLYTIC CAPACITORS UWH Dimensions V 10 16 25 35 50 Cap.(µF) Code 1A 1C 1E 1V 1H 10 100 8 × 6.2 24 22 220 8 × 6.2 38 33 330 8 × 6.2 44 8 × 10 46 47 470 8 × 6.2 48 8 × 10 52 10 × 10 58 100 101 8 × 6.2 58 8 × 10 66 8 × 10 74 10 × 10 80 220 221 8 × 10 90 10 × 10 102 10 × 10 116 Case size Rated 330 331 10 × 10 112 φD × L (mm) ripple Rated ripple current (mArms) at 125°C 120Hz Frequency coefficient of rated ripple current Frequency 50 Hz 120 Hz 300 Hz 1 kHz 10 kHz or more Coefficient 0.70 1.00 1.17 1.36 1.50 Taping specifications are given in page 23. Recommended land size, soldering by reflow are given in page 18, 19. Please refer to page 3 for the minimum order quantity. 146 CAT.8100H

Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: N ichicon: UWH1A101MCL1GS UWH1A221MCL1GS UWH1A331MCL1GS UWH1C101MCL1GS UWH1C221MCL1GS UWH1E101MCL1GS UWH1E221MCL1GS UWH1E470MCL1GS UWH1H100MCL1GS UWH1H220MCL1GS UWH1H330MCL1GS UWH1H470MCL1GS UWH1V101MCL1GS UWH1V330MCL1GS UWG1V6R8MCL1GB