ALUMINUM ELECTROLYTIC CAPACITORS UWD Chip Type, Low Impedance High Temperature (260°C) Reflow Corresponding with 260°C peak reflow soldering Recomended reflow condition : 260°C peak 5 sec. 230°C over 60 sec. 2 times (φ10 × 10 : 1 time) UWD Chip type, low impedance temperature range up to +105°C. Designed for surface mounting on high density PC board. Applicable to automatic mounting machine fed with carrier tape. Compliant to the RoHS directive (2011/65/EU). High Temperature AEC-Q200 compliant. Please contact us for details. Reflow UUD Specifications Item Performance Characteristics Category Temperature Range –55 to +105°C Rated Voltage Range 6.3 to 50V Rated Capacitance Range 1 to 1500µF Capacitance Tolerance ±20% at 120Hz, 20°C Leakage Current After 2 minutes' application of rated voltage at 20°C, leakage current is not more than 0.01 CV or 3 (µA), whichever is greater. Measurement frequency : 120Hz at 20°C Tangent of loss angle (tan δ) Rated voltage (V) 6.3 10 16 25 35 50 tan δ (MAX.) 0.26 (0.28) 0.20 (0.24) 0.16 (0.20) 0.14 (0.16) 0.12 (0.14) 0.12 (0.14) ( ) is φ8 over Measurement frequency : 120Hz Rated voltage (V) 6.3 10 16 25 35 50 Stability at Low Temperature Impedance ratio Z–25°C / Z+20°C 3 2 2 2 2 2 ZT / Z20 (MAX.) Z–55°C / Z+20°C 5 4 4 3 3 3 The specifications listed at right shall be met Capacitance change Within ±30% of the initial capacitance value when the capacitors are restored to 20°C after the Endurance tan δ 200% or less than the initial specified value rated voltage is applied for 5000 hours (2000 Leakage current Less than or equal to the initial specified value hours for φD = 4, 5 and 6.3) at 105°C. After storing the capacitors under no load at 105°C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 Shelf Life clause 4.1 at 20°C, they shall meet the specified values for the endurance characteristics listed above. The capacitors are kept on a hot plate for 30 seconds, which is Capacitance change Within ±10% of the initial capacitance value Resistance to soldering maintained at 250°C. The capacitors shall meet the characteristic heat requirements listed at right when they are removed from the plate tan δ Less than or equal to the initial specified value and restored to 20°C. Leakage current Less than or equal to the initial specified value Marking Black print on the case top. Chip Type Type numbering system (Example : 16V 22µF) (φ4 to φ6.3) Positive 1 2 3 4 5 6 7 8 9 10 11 12 13 14 Plastic platform UWD 1 C 2 2 0 M C L 1 G S Voltage (C:16V) Series 0.3MAX. C±0.2 MAX. 0.5 A233CWD D±0.5φ B±0.2 A±0.2A±0.2E Capacitance tolPCearoacnnkfcaiegg ue(±r ac2ot0ido%en) Lot No. Capacitance L±0.3 H Negative Rated capacitance (22µF) Rated voltage (16V) Series name Type (φ8,φ10) Positive Plastic platform VTorlatadgee m (aVr:k35V) Series 0.3MAX. C±0.2 0.5MAX. φ D × L 4 × 5.8 5 × 5.8 6.3 × 5.8 6.3 × 7.7 8 × 10 10 × (1m0m) A2100VWD D±0.5φ B±0.2 A±0.2A±0.2E CABEL 14415.....83308 25515.....13338 26625.....46628 26627.....46627 28831....09331 1134100..02..533 Lot No. Capacitance L±0.5 H Negative H 0.5 to 0.8 0.5 to 0.8 0.5 to 0.8 0.5 to 0.8 0.8 to 1.1 0.8 to 1.1 Voltage V 6.3 10 16 25 35 50 Code j A C E V H Dimension table in next page. 143 CAT.8100H

ALUMINUM ELECTROLYTIC CAPACITORS UWD Dimensions V 6.3 10 16 25 35 50 Cap. (µF) Code 0J 1A 1C 1E 1V 1H 1 010 4 × 5.8 5.00 30 2.2 2R2 4 × 5.8 5.00 30 3.3 3R3 4 × 5.8 5.00 30 4.7 4R7 4 × 5.8 1.80 80 5 × 5.8 1.52 85 10 100 4 × 5.8 1.80 80 5 × 5.8 0.76 150 6.3 × 5.8 0.88 165 15 150 4 × 5.8 1.80 80 5 × 5.8 0.76 150 5 × 5.8 0.76 150 6.3 × 5.8 0.88 165 22 220 4 × 5.8 1.80 80 5 × 5.8 0.76 150 5 × 5.8 0.76 150 5 × 5.8 0.76 150 6.3 × 5.8 0.88 165 27 270 4 × 5.8 1.80 80 5 × 5.8 0.76 150 5 × 5.8 0.76 150 6.3 × 5.8 0.44 230 6.3 × 5.8 0.44 230 6.3 × 7.7 0.68 185 33 330 5 × 5.8 0.76 150 5 × 5.8 0.76 150 6.3 × 5.8 0.44 230 6.3 × 5.8 0.44 230 6.3 × 5.8 0.44 230 6.3 × 7.7 0.68 185 47 470 5 × 5.8 0.76 150 6.3 × 5.8 0.44 230 6.3 × 5.8 0.44 230 6.3 × 5.8 0.44 230 6.3 × 5.8 0.44 230 6.3 × 7.7 0.68 185 56 560 5 × 5.8 0.76 150 6.3 × 5.8 0.44 230 6.3 × 5.8 0.44 230 6.3 × 5.8 0.44 230 6.3 × 7.7 0.34 280 8 × 10 0.34 300 68 680 6.3 × 5.8 0.44 230 6.3 × 5.8 0.44 230 6.3 × 5.8 0.44 230 6.3 × 5.8 0.44 230 6.3 × 7.7 0.34 280 8 × 10 0.34 300 100 101 6.3 × 5.8 0.44 230 6.3 × 5.8 0.44 230 6.3 × 5.8 0.44 230 6.3 × 7.7 0.34 280 8 × 10 0.17 450 8 × 10 0.34 300 150 151 6.3 × 5.8 0.44 230 6.3 × 5.8 0.44 230 6.3 × 7.7 0.34 280 8 × 10 0.17 450 8 × 10 0.17 450 10 × 10 0.18 670 220 221 6.3 × 5.8 0.44 230 6.3 × 7.7 0.34 280 6.3 × 7.7 0.34 280 8 × 10 0.17 450 10 × 10 0.09 670 10 × 10 0.18 670 330 331 6.3 × 7.7 0.34 280 8 × 10 0.17 450 8 × 10 0.17 450 10 × 10 0.09 670 10 × 10 0.09 670 470 471 8 × 10 0.17 450 8 × 10 0.17 450 8 × 10 0.17 450 10 × 10 0.09 670 680 681 8 × 10 0.17 450 10 × 10 0.09 670 10 × 10 0.09 670 1000 102 10 × 10 0.09 670 10 × 10 0.09 670 Case size Rated 1500 152 10 × 10 0.09 670 φD × L (mm) Impedance ripple Max. Impedance (Ω) at 20°C 100kHz, Rated ripple current (mArms) at 105°C 100kHz Frequency coefficient of rated ripple current Frequency 50 Hz 120 Hz 300 Hz 1 kHz 10 kHz or more Coefficient 0.35 0.50 0.64 0.83 1.00 Taping specifications are given in page 23. Recommended land size, soldering by reflow are given in page 18, 19. Please refer to page 3 for the minimum order quantity. 144 CAT.8100H

Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: N ichicon: UWD0J101MCL1GS UWD0J102MCL1GS UWD0J151MCL1GS UWD0J152MCL1GS UWD0J221MCL1GS UWD0J270MCL1GS UWD0J330MCL1GS UWD0J331MCL1GS UWD0J470MCL1GS UWD0J471MCL1GS UWD0J560MCL1GS UWD0J680MCL1GS UWD0J681MCL1GS UWD1A101MCL1GS UWD1A102MCL1GS UWD1A151MCL1GS UWD1A220MCL1GS UWD1A221MCL1GS UWD1A270MCL1GS UWD1A330MCL1GS UWD1A331MCL1GS UWD1A470MCL1GS UWD1A471MCL1GS UWD1A560MCL1GS UWD1A680MCL1GS UWD1A681MCL1GS UWD1C101MCL1GS UWD1C150MCL1GS UWD1C151MCL1GS UWD1C220MCL1GS UWD1C221MCL1GS UWD1C270MCL1GS UWD1C330MCL1GS UWD1C331MCL1GS UWD1C470MCL1GS UWD1C471MCL1GS UWD1C560MCL1GS UWD1C680MCL1GS UWD1C681MCL1GS UWD1E100MCL1GS UWD1E101MCL1GS UWD1E150MCL1GS UWD1E151MCL1GS UWD1E220MCL1GS UWD1E221MCL1GS UWD1E270MCL1GS UWD1E330MCL1GS UWD1E331MCL1GS UWD1E470MCL1GS UWD1E471MCL1GS UWD1E560MCL1GS UWD1E680MCL1GS UWD1H010MCL1GS UWD1H100MCL1GS UWD1H101MCL1GS UWD1H150MCL1GS UWD1H151MCL1GS UWD1H2R2MCL1GS UWD1H220MCL1GS UWD1H221MCL1GS UWD1H270MCL1GS UWD1H3R3MCL1GS UWD1H330MCL1GS UWD1H4R7MCL1GS UWD1H470MCL1GS UWD1H560MCL1GS UWD1H680MCL1GS UWD1V100MCL1GS UWD1V101MCL1GS UWD1V150MCL1GS UWD1V151MCL1GS UWD1V220MCL1GS UWD1V221MCL1GS UWD1V270MCL1GS UWD1V330MCL1GS UWD1V331MCL1GS UWD1V4R7MCL1GS UWD1V470MCL1GS UWD1V560MCL1GS UWD1V680MCL1GS UUX2G4R7MNL1GS UWD1V221MCQ6GS UWD1H220MCQ1GS UWD1V101MCQ1GS UWD1H221MCQ1GS UWD1V220MCQ1GS UWD1V221MCQ1GS