数量阶梯 | 香港交货 | 国内含税 |
+xxxx | $xxxx | ¥xxxx |
查看当月历史价格
查看今年历史价格
UUD1C470MCL1GS产品简介:
ICGOO电子元器件商城为您提供UUD1C470MCL1GS由Nichicon设计生产,在icgoo商城现货销售,并且可以通过原厂、代理商等渠道进行代购。 UUD1C470MCL1GS价格参考¥2.46-¥2.46。NichiconUUD1C470MCL1GS封装/规格:铝电解电容器, 47µF 16V 铝电解电容器 径向,Can - SMD 105°C 时为 2000 小时。您可以下载UUD1C470MCL1GS参考资料、Datasheet数据手册功能说明书,资料中有UUD1C470MCL1GS 详细功能的应用电路图电压和使用方法及教程。
参数 | 数值 |
产品目录 | |
描述 | CAP ALUM 47UF 16V 20% SMD铝质电解电容器-SMD 16volts 47uF Snap-In Audio small |
ESR(等效串联电阻) | - |
产品分类 | |
品牌 | Nichicon |
产品手册 | |
产品图片 | |
rohs | 符合RoHS无铅 / 符合限制有害物质指令(RoHS)规范要求 |
产品系列 | 铝电解电容器,铝质电解电容器-SMD,Nichicon UUD1C470MCL1GSUD |
数据手册 | |
产品型号 | UUD1C470MCL1GS |
不同温度时的使用寿命 | 105°C 时为 2000 小时 |
产品 | Low Impedance Electrolytic Capacitors |
产品目录绘图 | |
产品目录页面 | |
产品种类 | 铝质电解电容器-SMD |
其它名称 | 493-2259-6 |
加载寿命 | 2000 h |
包装 | Digi-Reel® |
商标 | Nichicon |
外壳直径 | 6.3 mm |
外壳长度 | 5.8 mm |
大小/尺寸 | 0.248" 直径(6.30mm) |
安装类型 | 表面贴装 |
容差 | ±20% |
封装 | Reel |
封装/外壳 | 径向,Can - SMD |
工作温度 | -55°C ~ 105°C |
工厂包装数量 | 1000 |
应用 | 通用 |
引线间距 | - |
损耗因数DF | 0.2 |
最大工作温度 | + 105 C |
最小工作温度 | - 55 C |
标准包装 | 1 |
漏泄电流 | 3 uA |
电压额定值DC | 16 V |
电容 | 47µF |
端接类型 | SMD/SMT |
类型 | - |
系列 | UD |
纹波电流 | 230mA |
表面贴装焊盘尺寸 | 0.260" 长 x 0.260" 宽(6.60mm x 6.60mm) |
阻抗 | 440 毫欧 |
额定电压 | 16V |
高度-安装(最大值) | 0.228"(5.80mm) |
ALUMINUM ELECTROLYTIC CAPACITORS UUD Chip Type, Low Impedance Chip type, low impedance temperature range up to +105°C. Designed for surface mounting on high density PC board. Applicable to automatic mounting machine fed with carrier tape. Compliant to the RoHS directive (2011/65/EU). AEC-Q200 compliant. Please contact us for details. UWD High Temp reflow UUD UCD Low Impedance Low Impedance UWG Specifications Item Performance Characteristics Category Temperature Range –55 to +105°C Rated Voltage Range 6.3 to 50V Rated Capacitance Range 1 to 1500µF Capacitance Tolerance ±20% at 120Hz, 20°C Leakage Current After 2 minutes' application of rated voltage at 20°C, leakage current is not more than 0.01 CV or 3 (µA), whichever is greater. Measurement frequency : 120Hz at 20°C Tangent of loss angle (tan δ) Rated voltage (V) 6.3 10 16 25 35 50 tan δ (MAX.) 0.26 (0.28) 0.20 (0.24) 0.16 (0.20) 0.14 (0.16) 0.12 (0.14) 0.12 (0.14) ( ) is φ8 over Measurement frequency : 120Hz Rated voltage (V) 6.3 10 16 25 35 50 Stability at Low Temperature Impedance ratio Z–25°C / Z+20°C 3 2 2 2 2 2 ZT / Z20 (MAX.) Z–55°C / Z+20°C 5 4 4 3 3 3 The specifications listed at right shall be met Capacitance change Within ±30% of the initial capacitance value when the capacitors are restored to 20°C after the Endurance rated voltage is applied for 5000 hours (2000 tan δ 200% or less than the initial specified value Leakage current Less than or equal to the initial specified value hours for φD = 4, 5 and 6.3) at 105°C. After storing the capacitors under no load at 105°C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 Shelf Life clause 4.1 at 20°C, they shall meet the specified values for the endurance characteristics listed above. The capacitors are kept on a hot plate for 30 seconds, which is Capacitance change Within ±10% of the initial capacitance value Resistance to soldering maintained at 250°C. The capacitors shall meet the characteristic heat requirements listed at right when they are removed from the plate tan δ Less than or equal to the initial specified value and restored to 20°C. Leakage current Less than or equal to the initial specified value Marking Black print on the case top. Chip Type Type numbering system (Example : 16V 22µF) (φ4 to φ6.3) Positive 1 2 3 4 5 6 7 8 9 10 11 12 13 14 Plastic platform X. U U D 1 C 2 2 0 M C L 1 G S Voltage (C:16V) Series 0.3MAX. C±0.2 0.5MA A222CUD D±0.5φ B±0.2 A±0.2A±0.2E Capacitance tolerance (±20%) 4 tφPo CDa 6oc.k3nafiggeuC rCcoaoLdtidoeen Lot No. Capacitance L±0.3 H Negative Rated capacitance (22µF) 8 • 10 NL Rated voltage (16V) Series name Type (φ8,φ10 ) Positive TVroaltdaeg em (aVr:k35V) Series 0P.3laMstiAc Xp.latform C±0.2 0.5MAX. φ D × L 4 × 5.8 5 × 5.8 6.3 × 5.8 6.3 × 7.7 8 × 10 10 ×( 1m0m) Lot No. A2100VCUDapacitancD±0.5φe L±0.5 B±0.2 H A±0.2A±0.2ENegative CHABEL 0.514415 t.....o83308 0.8 0.525515 t.....o13338 0.8 0.526625 t.....o46628 0.8 0.526627 t.....o46627 0.8 0.82883 1t....o09331 1.1 0.81134 100t..o02..533 1.1 Pressure relief vent Voltage V 6.3 10 16 25 35 50 Code j A C E V H Dimension table in next page. 141 CAT.8100H
ALUMINUM ELECTROLYTIC CAPACITORS UUD Dimensions V 6.3 10 16 25 35 50 Cap. (µF) Code 0J 1A 1C 1E 1V 1H 1 010 4 × 5.8 5.00 30 2.2 2R2 4 × 5.8 5.00 30 3.3 3R3 4 × 5.8 5.00 30 4.7 4R7 4 × 5.8 1.80 80 5 × 5.8 1.52 85 10 100 4 × 5.8 1.80 80 5 × 5.8 0.76 150 6.3 × 5.8 0.88 165 15 150 4 × 5.8 1.80 80 5 × 5.8 0.76 150 5 × 5.8 0.76 150 6.3 × 5.8 0.88 165 22 220 4 × 5.8 1.80 80 5 × 5.8 0.76 150 5 × 5.8 0.76 150 5 × 5.8 0.76 150 6.3 × 5.8 0.88 165 27 270 4 × 5.8 1.80 80 5 × 5.8 0.76 150 5 × 5.8 0.76 150 6.3 × 5.8 0.44 230 6.3 × 5.8 0.44 230 6.3 × 7.7 0.68 185 33 330 5 × 5.8 0.76 150 5 × 5.8 0.76 150 6.3 × 5.8 0.44 230 6.3 × 5.8 0.44 230 6.3 × 5.8 0.44 230 6.3 × 7.7 0.68 185 47 470 5 × 5.8 0.76 150 6.3 × 5.8 0.44 230 6.3 × 5.8 0.44 230 6.3 × 5.8 0.44 230 6.3 × 5.8 0.44 230 6.3 × 7.7 0.68 185 56 560 5 × 5.8 0.76 150 6.3 × 5.8 0.44 230 6.3 × 5.8 0.44 230 6.3 × 5.8 0.44 230 6.3 × 7.7 0.34 280 8 × 10 0.34 300 68 680 6.3 × 5.8 0.44 230 6.3 × 5.8 0.44 230 6.3 × 5.8 0.44 230 6.3 × 5.8 0.44 230 6.3 × 7.7 0.34 280 8 × 10 0.34 300 100 101 6.3 × 5.8 0.44 230 6.3 × 5.8 0.44 230 6.3 × 5.8 0.44 230 6.3 × 7.7 0.34 280 8 × 10 0.17 450 8 × 10 0.34 300 150 151 6.3 × 5.8 0.44 230 6.3 × 5.8 0.44 230 6.3 × 7.7 0.34 280 8 × 10 0.17 450 8 × 10 0.17 450 10 × 10 0.18 670 220 221 6.3 × 5.8 0.44 230 6.3 × 7.7 0.34 280 6.3 × 7.7 0.34 280 8 × 10 0.17 450 8 × 10 0.17 450 10 × 10 0.18 670 330 331 6.3 × 7.7 0.34 280 8 × 10 0.17 450 8 × 10 0.17 450 8 × 10 0.17 450 10 × 10 0.09 670 470 471 8 × 10 0.17 450 8 × 10 0.17 450 8 × 10 0.17 450 10 × 10 0.09 670 680 681 8 × 10 0.17 450 10 × 10 0.09 670 10 × 10 0.09 670 1000 102 8 × 10 0.17 450 10 × 10 0.09 670 Case size Rated 1500 152 10 × 10 0.09 670 φD × L (mm) Impedance ripple Max. Impedance (Ω) at 20°C 100kHz, Rated ripple current (mArms) at 105°C 100kHz Frequency coefficient of rated ripple current Frequency 50 Hz 120 Hz 300 Hz 1 kHz 10 kHz or more Coefficient 0.35 0.50 0.64 0.83 1.00 Taping specifications are given in page 23. Recommended land size, soldering by reflow are given in page 18, 19. Please refer to page 3 for the minimum order quantity. 142 CAT.8100H
Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: N ichicon: UUD1C681MNL1GS UUD1E100MCL1GS UUD1E101MCL1GS UUD1E150MCL1GS UUD1E151MNL1GS UUD1E220MCL1GS UUD1E221MNL1GS UUD1E270MCL1GS UUD1E330MCL1GS UUD1E331MNL1GS UUD1E470MCL1GS UUD1E471MNL1GS UUD1E560MCL1GS UUD1E680MCL1GS UUD1H010MCL1GS UUD1H100MCL1GS UUD1H101MNL1GS UUD1H150MCL1GS UUD1H151MNL1GS UUD1H220MCL1GS UUD1H221MNL1GS UUD1H270MCL1GS UUD1H2R2MCL1GS UUD1H330MCL1GS UUD1H3R3MCL1GS UUD1H470MCL1GS UUD1H4R7MCL1GS UUD1H560MNL1GS UUD1H680MNL1GS UUD1V100MCL1GS UUD1V101MNL1GS UUD1V150MCL1GS UUD1V151MNL1GS UUD1V220MCL1GS UUD1V221MNL1GS UUD1V270MCL1GS UUD1V330MCL1GS UUD1V331MNL1GS UUD1V470MCL1GS UUD1V4R7MCL1GS UUD1V560MCL1GS UUD0J101MCL1GS UUD0J102MNL1GS UUD0J151MCL1GS UUD0J152MNL1GS UUD0J221MCL1GS UUD0J270MCL1GS UUD0J330MCL1GS UUD0J331MCL1GS UUD0J470MCL1GS UUD0J471MNL1GS UUD0J560MCL1GS UUD0J680MCL1GS UUD0J681MNL1GS UUD1A101MCL1GS UUD1A102MNL1GS UUD1A151MCL1GS UUD1A220MCL1GS UUD1A221MCL1GS UUD1A270MCL1GS UUD1A330MCL1GS UUD1A331MNL1GS UUD1A470MCL1GS UUD1A471MNL1GS UUD1A560MCL1GS UUD1A680MCL1GS UUD1A681MNL1GS UUD1C101MCL1GS UUD1C150MCL1GS UUD1C151MCL1GS UUD1C220MCL1GS UUD1C221MCL1GS UUD1C270MCL1GS UUD1C330MCL1GS UUD1C331MNL1GS UUD1C470MCL1GS UUD1C471MNL1GS UUD1C560MCL1GS UUD1C680MCL1GS UUD1E471MCLHNAGS UUD1V221MNQ1GS UUD1C471MNS1GS UUD1V221MNS1GS UUD1V331MNS1GS