UUSSBBFF TTVV USB Connection System for Harsh Environment (cid:122) (cid:122) (cid:122) (cid:122) (cid:122) (cid:122) (cid:122) (cid:122) DDeessccrriippttiioonn USB Field allows you to use a standard USB 2.0 connection in harsh environments : • Sealed against fluids and dusts (IP67) • Shock, Vibration and Traction resistant • No cabling operation in field and no tools required • Mechanical Coding / Polarization (2 positions) • Improved EMI protection With USB Field, you can insert a standard USB 2.0 cordset into a metallic plug which will protect it from shocks, dust and fluids. No hazardous in-field cabling and grounding ! Transform your USB cordset into a Harsh Environment Connector ! This metallic plug is connected into a receptacle, using a Tri AApppplliiccaattiioonnss Start Thread coupling mechanism (MIL-DTL-38999 series III type) with anti-decoupling device for high vibrations. • Embedded Computers On the receptacle side, one A USB receptacle is soldered • Data Acquisition and onto a PCB allowing for the following back terminations : Transmission in harsh • another USB-A receptacle environment • solder : 4 tined holes on the PCB to solder your wires For : The USB 2.0 cordset shielding is transmitted to the USB • Railways receptacle through grounding fingers. • Battelfield Communication For an outstanding EMI protection, the conductive plated Systems 5 shells (Ni, Cd) with metallized receptacle inserts, transmit 00 • Navy Systems 2 the shielding to the connector shells and finally to the panel.Mai C G- N A 6- 4 0 0 0 0 1 C- O Amphenol ® D Amphenol ® Amphenol Socapex Promenade de l’Arve -B.P.29 -74311 THYEZ –F Tel. :+ 33 (0) 4 50 89 28 00 -Fax : + 33 (0) 4 50 96 29 75 www.usbfield.com

MMaaiinn CChhaarraacctteerriissttiiccss Data Transmission Environmental Protection •USB Specification 2.0 •Sealing (when mated) : IP67 (Temporaryimmersion) Data Rate : Up to 480 Mb/s for High Speed USB •Salt Spray : 48 h with Nickel plating Mechanical > 500 h with Olive DrabCadmium •Tri Start Thread coupling mechanism (MIL-DTL-38999 •Fire Retardant / Low Smoke: UL94 V0 and NF F 16 101 & 16 102 series III type) with anti-decoupling device •Vibrations : 10 –500 Hz, 10 g, 3 axes : no discontinuity> 1micro s •2 mechanical Coding / Polarization possibilities by the user •Shocks: IK06 : weightof 250 g drop from40 cm [15.75 in] onto (receptacle insert rotation) connectors(mated pair) •USBF TV plug retent° in the receptacle : 100 N in the axis •Humidity: 21 days, 43°C, 98% humidity •Mating cycles : 500 to 1500 •TemperatureRange : -55°C / +85°C Can be used with most of the USB cordset Brands : No tools required Assembly Instructions Plug Assembly 1. Only if you need a full sealing (IP67) : Install the white sticker around the plug, covering the 4 little holes of the overmolding 2. Insert the black O Ring around the front face of the USB A plug. This O Ring will ensure the connection sealing. 1 2 3. Insert the USB cordset into the metallic backshell 4. Insert laterally to the cable the retention spacer (this spacer is soft, in order to adapt to different shapes of overmolding) and slide the overmoldingof the USB-A plug into this retention spacer 3 4 5. Insert laterally to the cable the the friction ring 6. Choose the right coding (2 positions) and insert the USB-A plug into the protective plug. Reference is main key. 6 5 7. Screw the backshellon the plug body. A spanner can be necessary to fully screw it, and the connection to the receptacle can help. Important Note: The connection sealing is not done by the black retention spacer (which is sloted), but by the front face ORing(see 2.) 7 7 Receptacle Assembly Insert the USB module from the rear. Reference is main key. Beware to have a coding compatible with the coding you used for the plug : on front view, the white shapes in the USBs must be on the same side. To remove the USB module, insert the removal tool USBF ODE from the Front, and push back the module. 2 Amphenol ® Amphenol Socapex Promenade de l’Arve -B.P.29 -74311 THYEZ –F Tel. :+ 33 (0) 4 50 89 28 00 -Fax : + 33 (0) 4 50 96 29 75 www.usbfield.com

Plug : «6» Shell Receptacles : «2» Shell Square Flange Panel Drilling «7» Shell Jam Nut Panel Drilling «2PE» and «7PE» Shells with Backshell to protect Backterminationfrom dust, shocks and vibration. Backshell used with backtermination type 1 : Backshell used with backtermination type 2 : USB A receptacle Solder Not sealed Sealed –IP67 Back Terminations : View of the PCB of the Type 2 version with 4 tined holes for solder termination Type 1 : USB-A Receptacle Type 2 : Solder 4Tined holes to solderyour cable 3 Amphenol ® Amphenol Socapex Promenade de l’Arve -B.P.29 -74311 THYEZ –F Tel. :+ 33 (0) 4 50 89 28 00 -Fax : + 33 (0) 4 50 96 29 75 www.usbfield.com

Part Number Code USBF TV 2 1 G USB Field TV Shell Type 6 : Plug 2 : Square Flange Receptacle 2PE : Square Flange Receptacle with backshell 7 : Jam Nut Receptacle 7PE : Jam Nut Receptacle with backshell Back Terminations (Receptacles only) 1 : USB-A receptacle 2 : Solder (4 tined holes) Shells Plating N : Nickel G : Olive Drab Cadmium Examples: -Olive Drab Cadmium Plug : USBF TV 6G -OliveDrabCadmium Square Flange Receptacle, USB-A backterminat° : USBF TV 21G -OliveDrabCadmium Jam Nut Receptacle, USB-A receptacle back terminat° : USBF TV 71G -Nickel Jam Nut Receptacle, soldertermination: USBF TV 72N Square flange receptacle with Self Closing Cap (cap with a spring inside) : USBF 21N SCC (*) Nickel and metallized inserts (EMI) w! (*) This P/N includes the square flange Ne USBF 21B SCC (*) receptacle andthe self closing cap Black and blank insert Note :Panel gasket to use with this version only : JE18 Accessories •Metallic Caps USBF TVC 2 G Connector Type 6 : Plug Plug Cap Receptacle Cap 2 : Square Flange Receptacle 7 : Jam Nut Receptacle Protection de surface N : Nickel Square flange Jam Nut receptacle G : Olive Drab Cadmium Plug Cap end receptacle cap end cap end •Panel Gasket for square flange receptacle (Thickness : 0,8 mm [.031]) : JE15 4 •Receptacle Insert removal tool : USBF ODE Amphenol ® Amphenol Socapex Promenade de l’Arve -B.P.29 -74311 THYEZ –F Tel. :+ 33 (0) 4 50 89 28 00 -Fax : + 33 (0) 4 50 96 29 75 www.usbfield.com