Rugged Digital Networks Solutions Reinforced Infocom Connectors for Harsh Environment RJ Field - USB Field www.amphenol-socapex.com

TABLE OF CONTENTS Rugged Ethernet solutions Field installable RJFRB: plastic circular shell - reverse bayonet coupling .............................................................................................................................................10 RJF544: plastic circular shell - push pull coupling ........................................................................................................................................................13 RJFEZ: plastic rectangular shell - lever coupling ...........................................................................................................................................................15 RJF: metallic circular shell based on MIL-DTL-26482 H - bayonet coupling .....................................................................................................17 RJF special receptacles: inline receptacles and PC tails receptacles ......................................................................................................................20 NEW RJF receptacles and plug with 360° EMI backshells .....................................................................................................................................................21 RJF transversally sealed receptacles...................................................................................................................................................................................22 RJF hermetic receptacles .......................................................................................................................................................................................................23 NEW RJF for big insulation wire up to 1.6 mm [0.062 inch] .................................................................................................................................................24 RJ Field receptacle with self closing cap .........................................................................................................................................................................25 RJFTV: metallic circular shell based on MIL-DTL-38999 series III - thread coupling with anti-decoupling device ...............................26 Metallic self closing cap (SCC) for RJFTV square flange receptacle .......................................................................................................................29 RJFTV receptacles and plugs with 360° EMI backshells ..............................................................................................................................................30 RJFTV through bulkhead receptacles ................................................................................................................................................................................32 RJFTV stand off receptacles...................................................................................................................................................................................................33 NEW RJFTV transversally sealed receptacles .............................................................................................................................................................................36 NEW RJFTV hermetic receptacles ..................................................................................................................................................................................................37 NEW RJFTV for big insulation wire up to 1.6 mm ....................................................................................................................................................................38 RJ45/M12 adaptor......... ............................................................................................................................................................................................................39 Special RJ45 adaptor for military & commercial aeronautics..... ..............................................................................................................................40 High reliability Cat5E Ethernet cable and cordsets ......................................................................................................................................................41 NEW High reliability Cat6 Ethernet cable and cordsets ........................................................................................................................................................42 NEW High reliability Cat6A Ethernet cable and cordsets .....................................................................................................................................................43 NEW Cable assemblies RJ45/M12 railway cable solution .........................................................................................................................................................................................46 Jumper railway intercoach ....................................................................................................................................................................................................47 Rugged electronics Military Ethernet media converter for harsh environment NEW RES-GMC with Expanded Beam technology: military Ethernet media converter, fully MIL-STD compliant .......................................... 50 RES-GMC with butt joint fiber connector: military Ethernet media converter, fully MIL-STD compliant .................................................52 RJS-GMC with Expanded Beam Technology : military Ethernet Media Converter with industrial EMI compliancy ............................ 54 RES-GMC-1M-FORC: military Ethernet media converter with remote control, fully MIL-STD compliant ................................................ 56 NEW Military Ethernet switch for harsh environment, fully MIL-STD compliant RES-SCE-AC-8US: unmanaged miniature portable Ethernet switch - 8 fast ports .......................................................................................... 58 RES-SCE-8MG: managed miniature portable Ethernet switch - 8 Gigabit ports . ......................................................................................... .. 60 RESMLAC-8US-CAPS: unmanaged military Ethernet switch, MIL-DTL-38999 connectors - 8 fast ports ................................................. 62 RJSMLAC-8UG-CAPS: unmanaged military Ethernet switch, RJFTV connectors - 8 Gigabit ports ........................................................... 64 RJSMLAC-8MG-CAPS: managed military Ethernet switch, RJFTV connectors - 8 Gigabit ports . .............................................................. 66 RESMLAC-8MG-CAPS: managed military Ethernet switch, MIL-DTL-38999 connectors - 8 Gigabit ports .............................................. 68 RESMLAC-8MG-CAPS F35: managed military Ethernet switch, MIL-DTL-38999 connectors - 8 Gigabit ports ...................................... 70 RESMLAC-28MG: managed military Ethernet switch - 24 Gigabit + 4 combo 10G ports ........................................................................... 72 Military Ethernet switch for harsh environment with industrial EMI compliancy RJSML-8US1 and RJSML-8UG1: unmanaged military Ethernet switch, 8 fast or Gigabit ports.................................................................... 75 RJSML-8MF : managed military Ethernet switch - 8 fast ports ................................................................................................................................ 79 RJSML-MG7F3G : managed military Ethernet switch - 7 fast ports + 3 Gigabit ports ..................................................................................... 83

Rugged USB solutions (USB3.0 & USB2.0) Field installable USB3.0 NEW USB3FTV (USB-A) ............................................................................................................................................................................................................................................................88 NEW USB3F TV transversally sealed receptacles ......................................................................................................................................................................92 NEW USB3F TV hermetic receptacles ............................................................................................................................................................................................95 NEW USB3 receptacle with self closing cap ...............................................................................................................................................................................96 NEW Metallic self closing cap (SCC) for USB3F TV square flange receptacles ...............................................................................................................97 NEW High reliability USB 3.0 cordsets ..........................................................................................................................................................................................98 USB2.0 USBFTV (USB-A) ...............................................................................................................................................................................................................................................................99 USBF TV transversally sealed receptacles .......................................................................................................................................................................102 USBF TV hermetic receptacles ............................................................................................................................................................................................104 USBFTV receptacles with 360° EMI backshells .............................................................................................................................................................105 USBF TV through bulkhead receptacles..........................................................................................................................................................................106 USBF TV stand off receptacles ............................................................................................................................................................................................107 USB 2.0 receptacle with self closing cap (SCC) ............................................................................................................................................................108 Metallic self closing cap (SCC) for USBF TV square flange receptacles ................................................................................................................110 High reliability USB 2.0 cordsets ........................................................................................................................................................................................111 USBF SC - Quick release series ...........................................................................................................................................................................................112 USBBF TV (USB-B) ....................................................................................................................................................................................................................114 USBBF TV stand off receptacles .........................................................................................................................................................................................116 USBBF TV transversally sealed receptacles ....................................................................................................................................................................118 USBB receptacle with self closing cap .............................................................................................................................................................................120 Metallic self closing cap (SCC) for USBB square flange receptacles .....................................................................................................................121 NEW Special USB adaptor for Military & Commercial Aeronautics .................................................................................................................................122 Cable assemblies USB-A plastic & neoprene solutions with self closing cap (SCC) ............................................................................................................................124 USB-B Field plastic - Overmolded cordset plug ............................................................................................................................................................127 Rugged Electronics NEW Reinforced USB3FTV memory keys ...................................................................................................................................................................................130 NEW Reinforced USB amplifier.......................................................................................................................................................................................................131 ATEX Solutions RJFTVX, USBFTVX, RJ11FTVX - RJ45, USB, RJ11/12 explosion proof solutions for Zone 2 ............................................................................134 Other Rugged solutions Field installable FWFTV: metallic circular shell based on MIL-DTL-38999 series III - thread coupling with anti-decoupling device ............................142 IEEE1394 receptacle with self closing cap .....................................................................................................................................................................145 RJ11F: metallic circular shell based on MIL-DTL-26482 H - bayonet coupling ..................................................................................................146 Special RJ11 adaptor for Military & Commercial Aeronautics .................................................................................................................................148 MTRJF TV: fiber optic solution - metallic circular shell based on MIL-DTL-38999 series III ..........................................................................150 LC Field: fiber optic solution - metallic circular shell based on MIL-DTL-38999 series III ..............................................................................152 Glossary ................................................................................................................................................................................................................................154

RUGGED ETHERNET SOLUTION SELECTION GUIDE Indust. Coupling Connectors Series Ethernet Shape Material Specification Prime Market Page Mechanism Spec. Reverse Industrial RJF RB Circular Plastic N/A 10 Bayonet & Telecom IEC 60603-7 Industrial RJF544 Push Pull Circular Plastic N/A 13 variant 12 & Telecom IEC 60603-7 Industrial RJF EZ Lever Rectangular Plastic N/A 15 variant 13 & Telecom IEC 60603-7 Industrial RJF Bayonet Circular Metal MIL-DTL-26482 17 variant 11 Mil/Aero RJF in line recepatcles & IEC 60603-7 Industrial Bayonet Circular Metal MIL-DTL-26482 20 F PC tails receptacles variant 11 Mil/Aero NEW I RJF receptacles & plugs Industrial E wbaitchk s3h6e0l°ls EMI Bayonet Circular Metal MIL-DTL-26482 Mil/Aero 21 L D RreJcFe tpratancslveesrsally sealed Bayonet Circular Metal MIL-DTL-26482 &M Inidl/uAsetrroia l 22 I RJF hermetic Bayonet Circular Metal MIL-DTL-26482 Mil/Aero 23 receptacles & Industrial N NEW S RwJiFre f ourp b tiog 1in.6smulmat ion Bayonet Circular Metal MIL-DTL-26482 Industrial 24 [0.062 inch] Mil/Aero T Mil/Aero A MIL-DTL-38999 RJFTV Thread Circular Metal & Rail Mass 26 Series III Transit L Mil/Aero L RJF TV receptacles & MIL-DTL-38999 plugs with 360° EMI Thread Circular Metal & Rail Mass 30 backshells Series III Transit A B RJF TV through Thread Circular Metal MIL-DTL-38999 &M Rial/ilA Meraos s 32 bulkhead receptacles Series III L Transit E Mil/Aero RJF TV stand off Thread Circular Metal MIL-DTL-38999 & Rail Mass 33 receptacles Series III Transit RJFTV transversally Bayonet MIL-DTL-38999 Mil/Aero sealed receptacles or Thread Circular Metal Series III & Industrial 36 RJFTV hermetic Bayonet MIL-DTL-38999 Mil/Aero receptacles or Thread Circular Metal Series III & Industrial 37 NEW RJF TV for big insulation Bayonet MIL-DTL-38999 Circular Metal Mil/Aero 38 wireup to 1.6 mm or Thread Series III NEW Industrial RJ45/M12 adaptors Circular Metal & Rail Mass 39 Transit NEW Special RJ45 adaptor for Industrial Military & Commercial Circular Metal & Rail Mass 40 Aeronautics Transit

Indust. Coupling I Cables Series Ethernet Spec. Mechanism Shape Material Specification Prime Market Page N S High reliability Cat 5E F T cable and cordsets Mil/Aero & Industrial 41 I A E L NEW L L High reliability Cat 6 Mil/Aero & Industrial 42 D A cable and cordsets B NEW L High reliability Cat 6A Mil/Aero & Industrial 43 E cable and cordsets Indust. Coupling Connectors Series Shape Material Specification Prime Market Page Ethernet Spec. Mechanism A S NEW RJ45/M12 Industrial C S Bayonet Circular Metal MIL-DTL-26482 & Rail Mass 46 A E Railway cable solution Transit M B B LE LI NEW Jumper Thread Circular Metal MIL-DTL-38999 Rail Mass 47 E Series III Transit S Connectors Series Sealing Type # of ports Prime Market Page NEW RES-GMC Media converter IP67/68 Unmanaged 2 Gb ports Mil/Aero 50 with Expanded Beam Tech. NEW RES-GMC Media converter IP67/68 Unmanaged 2 or 4 Gb ports Mil/Aero 52 with Butt Joint Fiber connect. NEW RJS-GMC with Expanded Beam R IP67/68 Unmanaged 2 or 4 or 8 Gb ports Mil/Aero 54 Technology U NEW 1 Gb port RES-GMC-1M-FORC Media G IP67/68 Unmanaged + Mil/Aero 56 converter with Remote Control 1 Fiber port G NEW RES-SCE-AC-8US miniature E IP67/68 Unmanaged 8 Fast ports Mil/Aero 58 portable switch D NEW RES-SCE-AC-8MG miniature IP67/68 Managed 8 Gb ports Mil/Aero 60 portable switch E NEW RESMLAC-8US-CAPS military L Ethernet switch IP67/68 Unmanaged 8 Fast ports Mil/Aero 62 MIL-DTL-38999 connectors E NEW RJSMLAC-8UG-CAPS military C Ethernet switch IP67/68 Unmanaged 8 Gb ports Mil/Aero 64 MIL-DTL-38999 connectors T R NEW RJSMLAC-8MG-CAPS military Ethernet switch IP67/68 Managed 8 Gb ports Mil/Aero 66 RJFTV connectors O N NEW RESMLAC-8MG-CAPS military Ethernet switch IP67/68 Managed 8 Gb ports Mil/Aero 68 I MIL-DTL-38999 connectors C NEW RESMLAC-8MG-CAPS-F35 military Ethernet switch IP67/68 Managed 8 Gb ports Mil/Aero 70 S MIL-DTL-38999 connectors RESMLAC-28MG military IP67/68 Managed 24 Gb + 4 combo 10G ports Mil/Aero 72 Ethernet switch RJSML-8US1 & RJSML-8UG1 IP67/68 Unmanaged 8 Gb ports Mil/Aero 73 military Ethernet switch RJSML-MG7F3G military IP67/68 Managed 7 fast + 3 Gb ports Mil/Aero 77 Ethernet switch

RUGGED USB SOLUTION SELECTION GUIDE Coupling Connectors Series Shape Material Specification Prime Market Page Mechanism NEW MIL-DTL-38999 Mil/Aero, Rail Mass Transit USB3FTV (USB-A) Thread Circular Metal 81 Series III & Industrial NEW USB3F TV transversally MIL-DTL-38999 Mil/Aero, Rail Mass Transit Thread Circular Metal 86 sealed receptacles Series III & Industrial NEW USB3F TV hermetic MIL-DTL-38999 Thread Circular Metal Mil/Aero & Industrial 89 receptacles Series III NEW High reliability Mil/Aero, Rail Mass Transit 92 F USB 3.0 Cordsets & Industrial I E MIL-DTL-38999 Mil/Aero, Rail Mass Transit USBFTV (USB-A) Thread Circular Metal 93 Series III & Industrial L D USBF TV transversally MIL-DTL-38999 Mil/Aero, Rail Mass Transit Thread Circular Metal 96 sealed receptacles Series III & Industrial I N USBF TV hermetic Thread Circular Metal MIL-DTL-38999 Mil/Aero & Industrial 98 receptacles Series III S T USBF TV special MIL-DTL-38999 Mil/Aero, Rail Mass Transit receptacles with 360° EMI Thread Circular Metal 99 A Series III & Industrial backshells L L Special USB through Thread Circular Metal MIL-DTL-38999 MIl/Aero & Industrial 100 bulkhead receptacles Series III A B USBF TV stand off MIL-DTL-38999 Mil/Aero, Rail Mass transit Thread Circular Metal 101 L receptacles Series III & Industrial E High reliability Mil/Aero, Rail Mass Transit 105 USB 2.0 Cordsets & Industrial USBF SC Spring Circular Metal N/A Mil/Aero & Industrial 106 Quick release series Release MIL-DTL-38999 Mil/Aero, Rail Mass Transit USBBF TV (USB-B) Thread Circula Metal 108 Series III & Industrial USBBF TV stand off MIL-DTL-38999 Mil/Aero, Rail Mass Transit Thread Circular Metal 111 receptacles Series III & Industrial USBBF TV transversally MIL-DTL-38999 Mil/Aero, Rail Mass Transit Thread Circular Metal 113 sealed receptacles Series III & Industrial Special USB adaptor for Military & Commercial Circular Metal Aeronautic 116 Aeronautics

Coupling Connectors Series Shape Material Specification Prime Market Page Mechanism A S S USB-A plastic Circular Plastic N/A Industrial & Telecom 118 C E with Self Closing Cap A M B B L L USB B Field E I Plastic shell Thread Circular Plastic N/A Industrial & Telecom 121 E Overmolded cordset plug S E L NEW Reinforced MIL-DTL-38999 R USB3FTV & USB 2.0 Thread Circular Metal Mil/Aero & industrial 124 E Series III U Memory Keys C G T G E R NEW O D Reinforced MIL-DTL-38999 N Thread Circular Metal Mil/Aero & Industrial 125 USB 2.0 amplifier Series III I C S RUGGED ATEX ZONE 2 SOLUTION GUIDE E Connectors Series Coupling mechanism Shape Material Specification Prime Market Page L R E U C G RJFTVX, USBFTVX Factory Automation, T IP68 Metal 128 G RJ11FTVX Video, Oil & Gaz R E O D N I C S OTHER RUGGED SOLUTIONS Connectors Series Coupling Mechanism Shape Material Specification Prime Market Page F I FWFTV (FireWire) Thread Circular Metal MIL-DTL-38999 Mil/Aero & Video 136 Series III E L D RJ11F (RJ11) Bayonet Circular Metal MIL-C-26482 MIL/Aero & Industrial 140 I N NEW Special RJ11 adaptor S for Military & Circular Metal Aeronautic 142 Commercial T Aeronautics A L MTRJFTV (MTRJ) MIL-DTL-38999 Thread Circular Metal Mil/Aero & Rail Mass Transit 141 L Fiber optic solution Series III A B LC Field MIL-DTL-38999 L Thread Circular Metal Mil/Aero & Rail Mass Transit 146 Fiber optic solution Series III E

NOTES .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. A .............................................................................................................................................................................................................................................................................................. m p .............................................................................................................................................................................................................................................................................................. h e n .............................................................................................................................................................................................................................................................................................. o l .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. 8 8

Rugged Ethernet Solutions Field installable Table of contents RJF RB: plastic circular shell - reverse bayonet coupling .............................................................................................................................................. 10 l RJF544: plastic circular shell - push pull coupling ............................................................................................................................... 13 o n RJF EZ: plastic rectangular shell - lever coupling ................................................................................................................................ 15 e h RJF: metallic circular shell based on MIL-DTL-26482 H - bayonet coupling ............................................................................... 17 p m RJF special receptacles: inline receptacles & PC tails receptacles .................................................................................................. 20 A NEW RJF receptacles & plugs with 360° EMI backshells ............................................................................................................................... 21 NEW RJF transversally sealed receptacles........................................................................................................................................................... 22 RJF hermetic receptacles ............................................................................................................................................................................... 23 RJF for big insulation wire up to 1.6 mm [0.062 inch] ........................................................................................................................ 24 Self Closing Cap (SCC) for RJ Field receptacles ..................................................................................................................................... 25 RJF TV: metallic circular shell based on MIL-DTL-38999 series III - thread coupling with anti-decoupling device ..... 26 Metallic self closing cap (SCC) for RJFTV square flange receptacles.............................................................................................. 29 RJF TV receptacles and plugs with 360° EMI backshells .................................................................................................................... 30 RJF TV through bulkhead receptacles ...................................................................................................................................................... 32 RJF TV stand off receptacles ......................................................................................................................................................................... 33 NEW RJF TV transversally sealed receptacles ................................................................................................................................................... 36 NEW RJF TV hermetic receptacles ........................................................................................................................................................................ 37 NEW RJF TV for big insulation wire up to 1.6 mm ........................................................................................................................................... 38 RJ45/M12 adaptators ...................................................................................................................................................................................... 39 Special RJ45 adaptators for Military & Commercial Aeronautics .................................................................................................... 40 High reliability Cat 5E Ethernet cable & cordsets ................................................................................................................................. 41 NEW High reliability Cat 6 Ethernet cable & cordsets ................................................................................................................................... 42 NEW High reliability Cat 6A Ethernet cable & cordsets ................................................................................................................................ 43 9

ROHS COMPLIANT RJF RB Ethernet connection system for harsh environment – Industrial Ethernet RJFRB allows you to use an Ethernet Class D / Cat 5e and Class E / Cat 6 connection for 10 BaseT, 100 BaseTX or 1000 BaseT networks in harsh environments. With the patented RJStop® system you can use a standard RJ45 cordset in a protective composite plug which will protect it from shocks, dust and fluids. No hazardous on-field cabling and grounding! Applications Main characteristics n Telecom equipments n Sealed against fluids and dust (IP68) n Video control n Shock, vibration and traction resistant n No cabling operation in field, no tools required n Robotics n Reverse bayonet coupling n Industrial process control n RJ45 cordset retention in the plug: 70 N in the axis n CNC machines n Mating cycles: 500 min n Special machines n Compatible with cable diameter from 5,5 mm [0.216 in] to 7 mm [0.275 in] n Motion control Environmental protection n Sealing: IP68 n Salt spray > 1000 h n Fire retardant / Low smoke: UL94 V0 and NFF 16102, DIN 5510-2 n Operating temperature: - 40°C / +85°C Data transmission 10 BaseT, 100 BaseTX and 1000 BaseT networks Cat 5e per TIA/EIA 568B and ClassD per ISO/IEC 11801 Cat6 per TIA/EIA 568B and ClassE per ISO/IEC 11801 A m p h e n o l Part number code RJF RB 7 1RA Shell type 6: composite reverse bayonet plug, plastic gland 7: composite jam nut receptacle Back terminations (for receptacles only) 1: female RJ45 1RA: right angle female RJ45 2: RJ45 Cordset 3U: IDC cat6 - unshielded 3F: IDC cat6 - partial shielding 3S: IDC cat6 - 100% shielded 5: straight PCB Cordset length (for receptacles with “2” back termination only) 03 100BTX: 0.3m [11.81 inches] 05 100BTX: 0.5m [19.68 inches] 10 100BTX: 1m [39.37 inches] 15 100BTX: 1.5m [59.05 inches] Remark: cabling configuration  100 BTX = 568B (Ethernet specification) Examples: - Plug: RJF RB 6 - Receptacle, female RJ45 Back termination: RJF RB 71 - Receptacle, right angle female RJ45 back termination: RJF RB 71RA - Receptacle, 1,5m [59.05”] RJ45 cordset termination: RJF RB 72 15 100BTX 10

Plug n Type 6 shell with plastic gland RJF RB 6 Receptacles n Type 1: female RJ45 Panel Drilling (front mounting) RJF RB 71 n Ty pe 1RA: right angle female RJ45 (front mounting) Panel Drilling RJFRB71RA l o n e h p n Type 2: RJ45 cordset m (front mounting) A Panel Drilling RJFRB72XX 100BTX (XX=03, 05, 10 or 15 - see part number code page 10) n Type 3: IDC CAT 6 termination (rear mounting) Panel Drilling Unshielded: RJF RB 73U Shielded: RJFRB73S Partial shielding RJF RB 73F 11

n Straight PCB termination receptacle: (rear mounting) Panel Drilling Part number: RJF RB 75 IMPORTANT NOTE PCB drilling RJFRB The customer’s PCB design will determine the receptacle category. Assembly instructions 1 2 3 A m p h e n 4 5 6 o l 7 8 Accessories n IP68 Dust caps RJF RB C7 RJF RB C75 Cap for receptacles RJFRB71 / 71RA / 72xxx Cap for receptacles RJFRB75 and RJFRB73x 4 3 4 3 2 2 3 3 12

ROHS COMPLIANT RJF 544 Ethernet connection system for harsh environment – Industrial Ethernet RJF544 allows you to use an Ethernet Class D / Cat 5e connection for 10 BaseT, 100 Base TX or 1000 BaseT networks in harsh environments. With the patented RJStop® system you can use a standard RJ45 cordset in a protective composite plug which will protect it from shocks, dust and fluids. No hazardous on-field cabling and grounding ! Applications Main characteristics n Telecom equipment n Compliant with IEC 60603-7 variante 12 n Video control n Shock, vibration and traction resistant n Robotics n No cabling operation in field and no tools required n Industrial process control n Sealed against fluids and dust (IP68) n CNC machines n Quick push pull coupling n Special machines n RJ45 cordset retention in the plug: 100 N in the axis n Motion control n Mating cycles: 500 min n Tele-maintenance n Improved EMI Protection n Co mpatible with cable diameter from 6 mm [0.236 in] to 13 mm [0.512 in] Data transmission Environmental protection 10 BaseT, 100 BaseTX and 1000 BaseT networks n Sealing: IP68 Cat 5e per TIA/EIA 568B and ClassD per ISO/IEC n Salt spray > 1000 h 11801 n Fire retardant / Low smoke: UL94 V0 and NFF 16102, DIN 5510-2 n Vibrations: 10 – 500 Hz, 10 g, 3 axes: no discontinuity > 10 nano s. n Operating temperature: - 40°C / +85°C l o NE n W e h p m A Now available with tranversal sealing* *Seald in unmated condition Part number code RJF 544 2 2 03 100BTX Shell type 6: composite push pull plug, plastic gland 2: composite square flange receptacle 2S: composite square flange receptacle transversally sealed 2M: metallized (Ni) composite square flange receptacle 2SM: metallized (Ni) composite square flange receptacle transversally sealed Back terminations (for receptacles only) 1: female RJ45 1RA: right angle female RJ45 2: RJ45 cordset Cordset length (for receptacles with “2” back termination only) - Other lengths are available on demand 03 100BTX: 0.3 meters [11.81 inches] 05 100BTX: 0.5 meters [19.68 inches] 10 100BTX: 1 meter [39.37 inches] 15 100BTX: 1.5 meters [59.05 inches] 00: 8 tinned holes at the rear of the PCB to solder the cable Remark: cabling configuration  100 BTX = 568B (Ethernet specification) Examples: - Plug: RJF 544 6 - Square flange receptacle, female RJ45 back termination: RJF 544 21 - Metallized square flange receptacle, female RJ45 back termination: RJF 544 2M 1 - Square flange receptacle, 1,5m [59.05”] 100 BTX cordset termination: RJF 544 22 15 100BTX - Square flange receptacle, solder termination: RJF 544 22 00 - Transversally sealed receptacle female RJ45 back termination: RJF544 2S1 13

Plug n Type 6 shell with plastic gland RJF 544 6 Receptacle n Type 2S/2M/2SM shell: square flange receptacle with 4 mounting holes RJF 544 2x 1 RA RJF 544 2x 1 A m p h e n Back terminations o l Panel Drilling TTyyppee1 :1 f:e Fmemalea lReJ R45J45 Type1RATT:yy rppTigyeehp 11te :: a FF n2ee:gmm RleJaa4 llfeee5 m RRCJJao44lre55d RseJ4t5 TTyyppee 22:: RRJJ44TTy55yp pCCeeoo2 rr :2 ddR ss-Jee 40tt50 :c oSrodldseetr – 8 tinned holes TTyyppeeT y 22p e-- 00200 -:: 0SS0oo: llsddoeelrrd ––er 88 - tt8iinn tnnineendde dhh oohlloeelsses Notes: type 2 without RJ45 plug at the end of the cable is also available: consult factory Accessories n R ubber IP68 receptacle cap n Panel gasket n IP68 caps for plug p/n RJF 544BESC p/n RJF 544 02JE p/n 544 02 BM n Panel gasket (thickness: 0.6mm [.039]): p/n RJF 544 02 JE n Plug Insert removal tool: p/n 5440 OT 02 14

ROHS COMPLIANT RJF EZ Ethernet connection system for harsh environment – Industrial Ethernet RJFEZ allows you to use an Ethernet Class D / Cat. 5e connection for 10 BaseT,100 BaseTX or 1000 BaseT networks in harsh environments. With the patented RJStop® system you can use a standard RJ45 cordset in a protective composite plug which will protect it from shocks, dust and fluids. No hazardous on-field cabling and grounding! Applications Main characteristics n Telecom equipment n Compliant with IEC 60603-7 variante 13 n Video control n Sealed against fluids and dust (IP68) n Shock, vibration and traction resistant n Robotics n No cabling operation in field and no tools required n Industrial process control n Quick lever coupling n CNC machines n RJ45 cordset retention in the plug: 70 N in the axis n Special machines n Mating cycles: 500 min n Motion control n Co mpatible with cable diameter from 5,5 mm [0.216 in] to 7 mm [0.275 in] n Tele-maintenance Environmental protection n Sealing: IP68 Data transmission n Salt spray > 1000 h 10 BaseT, 100 BaseTX and 1000 BaseT networks n Fire retardant / Low smoke: UL94 V0 and NFF 16102, DIN 5510-2 Cat 5e per TIA/EIA 568B and ClassD per ISO/IEC n Operating temperature: - 40°C / +85°C 11801 l o n e h p m Part number code A RJF EZ 2 2 03 100BTX Shell type 6: composite lever plug, plastic gland 2: composite square flange receptacle Back terminations (for receptacles only) 1: female RJ45 2: RJ45 cordset Cordset length (for receptacles with “2” back termination only) 03 100BTX: 0.3m [11.81 inches] 05 100BTX: 0.5m [19.68 inches] 10 100BTX: 1m [39.37 inches] 15 100BTX: 1.5m [59.05 inches] Remark: Cabling configuration  100 BTX = 568B (Ethernet specification) Examples: - Plug: RJF EZ 6 - Receptacle, female RJ45 back termination: RJF EZ 21 - Receptacle, 1,5m [59.05”] 100 BTX cordset termination: RJF EZ 22 15 100BTX 15

Plug Receptacles Panel Drilling Back terminations A m p TypeT y1p:e F 1e: fmemaallee RRJJ4455 TyTyppee 2 2: R: JR4J54 co5r dCsoetrdset h e n Notes: type 2 without RJ45 plug at the end of the cable is also available: consult factory o l Assembly instructions Accessories n IP68 dust caps n Panel gasket For plugs: not available Thickness: 1 mm [.039] For receptacles: RJF EZ BE Part No. RJF EZ JE 16

ROHS COMPLIANT N & B RJF Ethernet connection system for harsh environment – Industrial Ethernet RJF allows you to use an Ethernet Class D / Cat. 5e connection for 10 BaseT,100 BaseTX or 1000 BaseT networks in harsh environments. With the patented RJStop®system you can use a standard RJ45 cordset in a metallic plug which will protect it from shocks, dust and fluids. No hazardous on-field cabling and grounding! Main characteristics n Compliant with IEC 60603-7 variante 11 n Bayonet coupling (“Audible & Visual” coupling signal ) n Robust metallic shells based on MIL-DTL-26482 H - Shell size 18 n RJ45 cordset retention in the plug: 100 N in the axis n Mating cycles: 500 min Applications n Sealed against fluids and dust (IP68) n Robotics n Shock, vibration and traction resistant n Industrial process control n No cabling operation in field and no tools required n CNC machines n Mechanical coding / polarization (4 positions) n Special machines n Co mpatible with cable diameter from 6 mm [0.236 in] to 13 mm [0.512 in] n Oil & Gas For smaller diameters, please consult us. n Motion control n Data acquisition and transmission in harsh Environmental protection environment n Sealing: IP68 n Tele-maintenance n Salt spray: 48 h with nickel plating > 96 h with black coating < 500 h with olive drab cadmium Data transmission n Fire retardant/Low smoke: UL94 V0 and NF F 16 101 & 16 102 10 BaseT, 100 BaseTX and 1000 BaseT networks n Vibrations: 10-500Hz, 10g, 3 axes: no discontinuity >10 nano s Cat 5e per TIA/EIA 568B and ClassD per ISO/IEC n Shocks: IK06 ►weight of 250 g drop from 40cm 11801 [15.75 in] onto connectors (mated pair) l o n Humidity: 21 days, 43°C, 98% humidity n n Temperature range: -40°C / +85°C e h n Storage temperature: p m Part number code A RJF 2 2 B 03 100BTX Shell type 6: plug, plastic gland 6M: plug, metal gland 2: square flange receptacle 2PE: square flange receptacle, IP68 backshell, plastic gland 2PEM: square flange receptacle, IP68 backshell, metal gland 7: jam nut receptacle 7PE: jam nut receptacle, IP68 backshell, plastic gland 7PEM: jam nut receptacle, IP68 backshell, metal gland Nota: also available a transversally sealed receptacle (unmated) ►see page 22 Back terminations (for receptacles only) 1: female RJ45 1RA: right angle female RJ45 2: RJ45 cordset Shell finishes B: black Coating - ROHS compliant N: nickel - ROHS compliant ZN: aluminium shell - black zinc nickel plating - ROHS compliant G: olive drab cadmium Nota: for N, G, ZN the inserts are metallized. Cordset length (for receptacles with “2” back termination only) - Other lengths are available on demand 03 100 BTX: 0.3m [11.81 inches] 00: 8 tinned holes at the rear of the PCB to solder the cable 05 100 BTX: 0.5m [19.68 inches] xx OPEN: open cable - with no plug at the end (xx to be replaced by the cordset length 03, 05, 10, or 15 - see nearby) 10 100 BTX: 1m [39.37 inches] 15 100 BTX: 1.5m [59.05 inches] Remark: cabling configuration  100 BTX = 568B (Ethernet specification) Examples: - Nickel plug: RJF 6 N - Black square flange receptacle, female RJ45 back termination: RJF 2 1 B - Olive drab cadmium jam nut receptacle, 1.5m [59.05”] 100 BTX cordset termination: RJF 7 2 G 15 100BTX - Black in line square flange receptacle, 30cm [11.81”] 100BTX cordset termination: RJF 2PE 2 B 03 100BTX - Nickel jam nut receptacle, solder termination: RJF 72 N 00 17

Plug n Shell type 6 with plastic gland n Shell type 6 with metal gland RJF 6 X RJF 6M X Receptacles n Square flange receptacle • 4 mounting holes: shell type 2 RJF 21 X (Straight Female RJ45) RJF 21 RA X (Right Angle Female RJ45) Panel Drilling n Jam nut receptacle • Hexagonal nut mounting: shell type 7 A m p h e n o l RJF 71 X (straight female RJ45) RJF 71 RA X (right angle female RJ45) Panel drilling n Receptacles with IP68 backshell : shell type 2PE and 7PE with plastic or metal gland 82 [3.23] Fully Assembled 82 [3.23] Fully Assembled RJF 2PE/2PEM RJF 7PE/7PEM Back terminations ← ↓ Type 1 Type 1RA Type 2 Type OPEN Type 2 - 00 Female RJ45 Right angle female RJ45 RJ45 cordset No plug at the end Solder - 8 tinned holes 18

Universal: can be used with all standard RJ45 Cat.5e cordset brands. AUDIBLE Assembly instructions of the RJ Stop LOCKING 1. Push down the RJ45 cordset latch, and fix it inside the insert 2. Press in and click the other part of the insert 3. Insert in the metallic housing 1 AUDIBLE LOCKING 2 AUDIBLE RJ45 PLUG LOCKING 1 1 HALF INSULATOR 1 2 2 STOPPER RJ STOP® 1 RJ45 PLUG Patent 2 1 RJ45 PLUG HALF INSULATOR STOPPER HALF IN2SULATOR 1 STOPPER RJ STOP® HALF INSULA1TOR 2 Patent STOPPER RJ STOP® 1 Easy and safe - No field cablPinatgen ttools requireSTdO PfPoErR cabling HALF INSULATOR Assembling of the plug. STOPPER 4 codings possibilities HALF INSULATOR (defined by the customer during the assembling). MAIN KEY l o n e h Assembling of the receptacle. p IMPORTANT NOTE: to remove the insert, use the m n I nsert removal tool for receptacle and plug A P/N: RJF ODE Accessories n Metallic cap RJFC 2 G Connector type 6: plug 2: square Flange Receptacle e 7: jam Nut Receptacle SBNh:: bealllual cmmki anctoieuarmtiian lsg h& e- flRli nO- inHsihSc kceolm pplalitainngt - ROHS compliant Ø4.45 ±0.25 G: aluminium shell - olive drab cadmium plating ZN: aluminium shell - black zinc nickel plating - ROHS compliant n P anel gasket for square flange 2 »thickness - 0,6 mm P/N: JE 18 19

ROHS COMPLIANT N & B RJF In line receptacles & PC tails receptacles In line receptacles Inline receptacles allow you to make cable extensions in the field by using them with rugged RJ Field series plugs. Ø Plating Plastic gland Metallic gland Part Black coating - ROHS compliant RJF2PEWF1B RJF2PEMWF1B number Nickel - ROHS compliant RJF2PEWF1N RJF2PEMWF1N Olive drab cadmium RJF2PEWF1G RJF2PEMWF1G Black Zinc Nickel RJF2PEWF1ZN RJF2PEMWF1ZN PC tails receptacles These receptacles can be soldered directly on your PCB. A compound insures a transversal sealing and good performance in high vibration environments. They can be connected with rugged RJField series plugs. compound for transversal sealing A "A" coding m p h e n o l PCB LAYOUT – SOLDER FACE VIEW Panel Drilling Plating Part number Part Black coating - ROHS compliant RJF 2S X 5B number Nickel - ROHS compliant RJF 2S X 5N Olive drab cadmium RJF 2S X 5G Black zinc Nickel RJF 2S X 5ZN X to be replaced by the letter of the coding position you need (A, B, C, or D) 20

ROHS N E W COMPLIANT N & B RJF Receptacles & plugs with 360° EMI backshell RJF series receptacles and plugs with EMI backshells provide a solution with 360° shielding: same protection than the one proposed by standard MIL-DTL-26482H connectors. With those solutions we recommend using our reinforced and double shielded Cat5E, Cat6, or Cat6A cable ►see pages 41-42-43. Square flange receptacle - Straight backshell Panel Drilling Plating Part number Part Nickel - ROHS compliant Kit30439NI number Olive drab cadmium Kit30439 Black Zinc Nickel Kit30439ZN Kit30439 / Kit30439NI & Kit30436 / Kit30436N include: l o Inserts n e h p m A Plug - Straight backshell Plating Part number Part Nickel - ROHS compliant Kit30394NI number Olive drab cadmium Kit30394 Black Zinc Nickel Kit30394ZN Kit30394 & Kit30394NI include: Plug body Inserts Backshell body Band Heat shrink sleeve 21

ROHS COMPLIANT N, B & BZ RJF Transversally sealed receptacles In some applications, a transversal sealing for the receptacle is a « must ». This will prevent fluids and dust from going through the receptacle when plug or cap are not mated to the receptacle. The sealed solution (version "S") has a compound at the rear of the receptacle as shown on the picture. Applications Main characteristics n Outdoor equipment n Same as the RJF series. n Airplanes equipment n A complete IP68 sealing of the receptacle (even with no plug or no n Tactical radios protective cap mated) is added. n Shelters n Outside dimensions are the same as the standard RJF series. n Rugged computers n D ata acquisition and transmission in harsh envi- ronments Data transmission 10 BaseT, 100 BaseTX and 1000 BaseT networks Cat 5e per TIA/EIA 568B and ClassD per ISO/IEC 11801 IMPORTANT NOTE Due to the compound, the coding of the connector must be done in the factory : use the codes A, B, C or D in the part number: see below. A m p h e n o l Part number code Series RJF 7S A 2 G 03 100BTX RJF: MIL-DTL-26482 H bayonet Shell type 2S: sealed square flange receptacle 7S: sealed jam nut receptacle Coding A,B,C,D Back terminations (for receptacles only) 1: female RJ45 1RA: right angle female RJ45 2: RJ45 Cordset Shell material & finish B: aluminium shell - black coating - ROHS compliant ZN: aluminium shell - black zinc nickel plating - ROHS compliant N: aluminium shell - nickel plating - ROHS compliant G: aluminium shell - olive drab cadmium plating Nota: for N, G, ZN, the inserts are metallized. Cordset length (For Receptacles with “2” Back Termination only) - Other lengths are available on demand 03 100 BTX: 0.3m [11.81 inches] 05 100 BTX: 0.5m [19.68 inches] 10 100 BTX: 1m [39.37 inches] 15 100 BTX: 1.5m [59.05 inches] xx OPEN: open cable - with no plug at the end (xx to be replaced by the cordset length 03, 05, 10, or 15 - see above) Remark: cabling configuration: 100 BTX = 568B (Ethernet specification) Examples: - bayonet, sealed jam nut receptacle, A coding, with female RJ45 back termination, olive drab cadmium plating: RJF 7SA 1 G - bayonet, sealed square flange receptacle, A coding, with female RJ45 back termination, black plating: RJF 2SA 1 B - bayonet, sealed jam nut receptacle, A coding, 1.5m [59.05”] 100 BTX cordset, olive drab cadmium plating: RJF 7SA 2 G15 100BTX 22

ROHS COMPLIANT N, B & BZ RJF Hermetic receptacles In some applications, a transversal hermiticity for the receptacle is a « must ». This will prevent gas from going through the receptacle when plug or cap are not mated to the receptacle. The hermetic solution (version "H") has a compound at the rear of the receptacle as shown on the picture. Helium leakage is less than 1.10-6 cm3 per second [0.1 micron cubic ft per hour] at one bar [15 psi] pressure differential. Applications Main characteristics n Outdoor equipment n Same as the RJF series. n Airplanes equipment n A complete IP68 sealing of the receptacle (even with no plug or no n Tactical radios protective cap mated) is added. n Shelters n Outside dimensions are the same as the standard RJF series. n Rugged computers n D ata acquisition and transmission in harsh environments Data transmission 10 BaseT, 100 BaseTX and 1000 BaseT networks Cat 5e per TIA/EIA 568B and ClassD per ISO/IEC 11801 IMPORTANT NOTE Due to the compound, the coding of the connector must be done in the factory: use the codes A, B, C or D in the part number: see below. l o n e h p m A Part number code Series RJF 7H A 2 G 03 100BTX RJF: MIL-DTL-26482 H bayonet Shell type 2H: transversally sealed and hermetic square flange receptacle 7H: transversally sealed and hermetic jam nut receptacle Coding A,B,C,D Back terminations (for receptacles only) 1: female RJ45 1RA: right angle female RJ45 2: RJ45 Cordset Shell material & finish B: aluminium shell - black coating - ROHS compliant ZN: aluminium shell - black zinc nickel plating - ROHS compliant N: aluminium shell - nickel plating - ROHS compliant G: aluminium shell - olive drab cadmium plating Nota: for N, G, ZN plating, the inserts are metallized. Cordset length (for receptacles with “2” back termination only) - Other lengths are available on demand 03 100 BTX: 0.3m [11.81 inches] 05 100 BTX: 0.5m [19.68 inches] 10 100 BTX: 1m [39.37 inches] 15 100 BTX: 1.5m [59.05 inches] xx OPEN: open cable - with no plug at the end (xx to be replaced by the cordset length 03, 05, 10, or 15 - see above) Remark: cabling configuration: 100 BTX = 568B (Ethernet specification) Examples: - bayonet, sealed jam nut receptacle, A coding, with female RJ45 Back termination, olive drab cadmium plating: RJF 7HA 1 G - bayonet, sealed square flange receptacle, A coding, with female RJ45 back termination, black plating: RJF 2HA 1 B - bayonet, sealed jam nut receptacle, A coding, 1.5m [59.05”] 100 BTX cordset, olive drab cadmium plating : RJF 7HA 2 G15 100BTX 23

N E W RJF Special plug for big insulation wire up to 1.6 mm [0.062 in] Rugged plug dedicated to cable with insulation wire from 1,1 to 1,6 mm [from 0.043 in to 0.062 in] Remark: - Solution compatible with any RJF receptacle - For cables which are not compatible with standard RJ45 plug. Main characteristics n Bayonet coupling (“Audible & Visual” coupling signal ) n Robust metallic shells based on MIL-DTL-26482 H - Shell size 18 Applications n RJ45 cordset retention in the plug: 100 N in the axis n Robotics n Mating cycles: 500 min n Industrial process control n Sealed against fluids and dust (IP68) n CNC machines n Shock, vibration and traction resistant n Special machines n Mechanical coding / polarization (4 positions) n Oil & Gas n Co mpatible with cable diameter from 6 mm [0.216 in] to 13 mm [0.512 in], n Motion control for smaller diameters, please consult us n Data acquisition and transmission in harsh environment Environmental protection n Tele-maintenance n Sealing: IP68 n Salt Spray: 48 h with nickel plating > 96 h with black coating > 500 h with oliv drab cadmium Data transmission n Fire retardant/Low smoke: UL94 V0 and NF F 16 101 & 16 102 10 BaseT, 100 BaseTX and 1000 BaseT networks n Vibrations: 10 – 500 Hz, 10 g, 3 axes: no discontinuity >10 nano s. Cat 5e per TIA/EIA 568B and ClassD per ISO/IEC 11801 n Shocks: IK06 ► weight of 250 g drop from 40 cm [15.75 in] onto connectors (mated pair) n Humidity: 21 days, 43°C, 98% humidity A n Temperature range: - 40°C / +85°C m p h e n o l Plating Part number Black coating - ROHS compliant Kit39992B Part number Nickel - ROHS compliant Kit39992NI Olive drab cadmium Kit39992G Black Zinc Nickel Kit39992ZN 24

ROHS COMPLIANT N & B RJ Field receptacle with self closing cap This kit includes a receptacle and a Self Closing Cap which protects the RJ Field square flange receptacles (MIL-C-26482 type). This cap offers a protection against dust and water projections. A spring automatically closes the upper part of the cap when either the RJfield plug or RJ45 cordset are removed from the receptacle. Sealing level IP54 (Splash and dust Proof) RJF 21 X SCC 36 RJ45 version [1.417] 64.1[2.523] 26.1[1.028] 26.97[1.062] 21.9[.862] 26.7 [1.052] l o Plating Metallized insert Part number n (EMI) e h Part Black coating - ROHS compliant No RJF 21B SCC p number * m Nickel - ROHS compliant Yes RJF 21N SCC A Olive drab cadmium Yes RJF 21G SCC Black Zinc Nickel - ROHS compliant No RJF 21ZN SCC * The part number includes the receptacle + the self closing cap Remarks: • the back termination is female RJ45 • it could be used with our RJF series plug (part number RJF6xx ►see page 17) n N ote: Panel gasket with any of these receptacles: JE18 USBF 21 x SCC, USBBF 21 x SCC, & IEEE1394 USB2.0 & 3.0 - A version USB-B version IEEE1394 version (see pages 94 & 107) (see page 118) (see page 143) 25

ROHS COMPLIANT N & BZ RJF TV Ethernet connection system for harsh environment RJFTV allows you to use an Ethernet Class D / Cat. 5e connection for 10 BaseT, 100 BaseTx or 1000 BaseT networks in harsh environments. With the patented RJStop system you can use a standard RJ45 cordset in a metallic plug which will protect it from shocks, dust and fluids. No hazardous on-field cabling and grounding! Main characteristics n Sealed against fluids and dusts (IP68) n Shock, vibration and traction resistant Applications n No cabling operation in field and no tools required n Da ta acquisition and transmission in harsh n Mechanical coding / Polarization (4 positions) environment n Improved EMI protection n Ra ilways n T ri Start Thread coupling mechanism (MIL-DTL-38999 series III type) n Ra dars with anti-decoupling device - Shell size 19 n Sh elters n Robust metallic shells n Ba ttlefield communication n RJ45 cordset retention in the plug: 100 N in the axis n Sy stems n Mating cycles: 500 min n Na vy n Co mpatible with cable diameter from 6 mm [0.236 in] to 13 mm [0.512 in], for smaller diameters please consult us Environmental protection Data transmission n Sealing: IP68 10 BaseT, 100 BaseTX and 1000 BaseT networks n Salt spray: 48h with aluminium shell Cat 5e per TIA/EIA 568B and ClassD per ISO/IEC 11801 > 500h with aluminium shell - Olive drab cadmium plating 500 h with marine bronze shell n Fire retardant/Low smoke : UL94 V0 and NF F 16 101 & 16 102 n Vibrations : 10 - 500 Hz, 10 g, 3 axes: no discontinuity > 10 nano s. n Compounded versions tested per NAS 1599 (5-3000 Hz, 20g, 12h) A n Shocks: IK06 ►weight of 250 g drop from 40 cm [15.75 in] m onto connectors (mated pair) p n Humidity: 21 days, 43°C, 98% humidity h n Temperature range: -40°C / +85°C e n o l Part number code RJF TV 2 2 G 03 100 BTX Shell type 6: plug with plastic gland 6M: plug with metal gland 2: square flange receptacle 2PE: square flange receptacle, IP68 backshell, plastic gland 2PEM: square flange receptacle, IP68 backshell, metal gland 7: jam nut receptacle 7PE: jam nut receptacle, IP68 backshell, plastic gland 7PEM: jam nut receptacle, IP68 backshell, metal gland Nota: also available a transversally sealed receptacle (unmated) ►See page 36 Back terminations (receptacles only) 1: female RJ45 1RA: right angle female RJ45 2: RJ45 Cordset Shells material & Finish (inserts are metallized) N: aluminium shell - nickel plating - ROHS compliant ZN: aluminium shell - black zinc nickel plating - ROHS compliant G: aluminium shell - olive drab cadmium plating BZ: marine bronze shell - ROHS compliant Cordset length (type 2 back termination only) - Other lengths are available on demand 03 100 BTX: 0.3m [11.81 inches] 00: 8 tinned holes at the rear of the PCB to solder the cable 05 100 BTX: 0.5m [19.68 inches] xx OPEN: open cable - with no plug at the end (xx to be replaced by the cordset length 03, 05, 10, or 15 - see nearby) 10 100 BTX: 1m [39.37 inches] 15 100 BTX: 1.5m [59.05 inches] Remark: cabling configuration  100 BTX = 568B (Ethernet specification) Examples: - Olive crab cadmium plug with plastic gland: RJF TV 6G - Olive drab cadmium jam nut receptacle, female RJ45 back termination: RJF TV 71G - Nickel jam nut receptacle, 1,5 m 100 BTX cordset back termination: RJF TV 72N 15 100BTX - Olive drab cadmium in line square flange recept., 0,3 m 100 BTX cordset back termination: RJF TV 2PE 2 G 03 100BTX - Nickel jam nut receptacle solder termination 8 tinned holes: RJF TV 22 N 00 26

Plug n Shell type 6 with plastic or metal gland n Shell type 6 with metal gland RJF TV 6 X RJF TV 6M X Receptacles n Square flange receptacle - 4 mounting holes: shell type 2 Panel Drilling RJFTV 21 X (straight female RJ45) RJFTV 21 RA X (right angle female RJ45) n Jam nut receptacle - Hexagonal nut mounting: shell type 7 Panel drilling l o n e h p m A RJFTV 71 X (straight female RJ45) RJFTV 71 RA X (right angle female RJ45) n Receptacles with IP68 backshell: Shell type 2PE and 7PE with plastic or metal gland 9922 [[33..662222]] RJF TV 2PE/2PEM/7PE/7PEM Back terminations ↓ ← Type 1 Type 1RA Type 2 Type OPEN Type 2 - 00 Female RJ45 Right angle female RJ45 RJ45 cordset No plug at the end Solder - 8 tinned holes 27

Assembly instructions Insert codings Assembling of the plug. 4 codings possibilities ASSEMBLY + CODING «CLIC» ! (defined by the customer during the assembling). Coding A Coding B Coding C Coding D «CLIC» ! Plug Main key Receptacle INSERTS CODING Connection side view Assembling of the receptacle. «CLIC» ! IMPORTANT NOTE: to remove the insert, use the n I nsert removal tool for receptacle and plug P/N: RJF ODE ASSEMBLY + CODING INSERTS CODING Connection side view A Accessories m p n Metallic caps h e RJFTVC 2 G n o Connector type l 6: plug 2: square flange receptacle 7: jam nut receptacle Shell material & finish N: aluminium shell - nickel plating - ROHS compliant G: aluminium shell - olive drab cadmium plating BZ: marine bronze shell - ROHS compliant ZC: aluminium shell - green zinc cobalt plating - ROHS compliant Plug Cap Receptacle Cap ZN: aluminium shell - black zinc nickel plating - ROHS compliant n P anel gasket for square flange receptacle Thickness: 0,8 mm [.031]): P/n: JE19 28

Metallic self closing cap (SCC) For RJFTV square flange receptacles. This self closing cap automatically protects the RJF TV square flange receptacle (MIL-DTL-38999 type), protecting your system from dust and water projection. A spring automatically closes the upper part of the cap when the RJF TV plug is removed from the receptacle. ≈ 48,7 ≈ 5 9, 4 ≈ 5 4 1, 29, Ø 3 4- Ø 3,2 29,4 ≈ 28,1 [ 0,128 ] 39 l o n IMPORTANT NOTE e Metal self closing cap are sold separately (without receptacle). h p m A Sealing level IP67 Green Nickel Black Plating Part number Part Black coating - ROHS compliant RJF TV SCC B number Nickel - ROHS compliant RJF TV SCC N Olive drab cadmium RJFTV SCC G Black Zinc Nickel - ROHS compliant RJFTV SCC ZN Remark: compatible with RJFTV square flange receptacle type RJFTV2xxx only (see page 26). 29

RJF TV Receptacles & plugs with 360° EMI backshells RJFTV series receptacles and plugs with EMI backshells provide a solution with 360° shielding: same protection than the one proposed by standard MIL-DTL-38999 series III connectors. With those solutions we recommend using our reinforced and double shielded Cat5E, Cat6, or Ca6A cable. ►see pages 41-42-43 Square flange receptacle - Straight backshell Square flange receptacle - Right angle backshell Panel Drilling Plating P/N Plating P/N Part Nickel - ROHS compliant Kit38082NI Part Nickel - ROHS compliant Kit40791NI number Olive drab cadmium Kit38082 number Olive drab cadmium Kit40791 Black zinc nickel - ROHS compliant Kit38082ZN Black zinc nickel - ROHS compliant Kit40791ZN A m p Kit38082 and Kit40791 include: n P anel gasket for square flange receptacle h (thickness: 0,8 mm [.031]) e n o Heat shrink sleeve P/n: JE19 l Rj45 receptacle Receptacle body Backshell body Band 2 metallized inserts Jam nut receptacle - Straight backshell Jam nut receptacle - Right angle backshell Panel drilling Plating P/N Plating P/N Part Nickel - ROHS compliant Kit38204NI Part Nickel - ROHS compliant Kit40771NI number Olive drab cadmium Kit38204 number Olive drab cadmium Kit40771 Black zinc nickel - ROHS compliant Kit38204ZN Black zinc nickel - ROHS compliant Kit40771ZN 30

Kit38204 and Kit40771 include: IMPORTANT NOTE With these receptacles, you will have to solder Heat shrink sleeve your own cable on the PCB. So the wire positions have to be defined according to your network. Backshell body WIRE POSITION Rj45 receptacle Receptacle body Band TO BE DEFINED BY CUSTOMER ACCORDING TO NETWORK Plug - Straight backshell Plug - Right angle backshell Plating P/N Plating P/N Part Nickel - ROHS compliant Kit38081NI Part Nickel - ROHS compliant Kit40792NI number Olive drab cadmium Kit38081 number Olive drab cadmium Kit40792 Black zinc nickel - ROHS compliant Kit38081ZN Black zinc nickel - ROHS compliant Kit40792ZN Kit38081 and Kit40792 include: l o n e h p m A Plug body Inserts Backshell body Band Heat shrink sleeve IMPORTANT NOTE With these plugs, the standard RJ45 plug is not provided. Customer will have to crimp a standard RJ45 on the cable by himself. Remark: we advise using our double shielded, reinforced Cat5E, Cat6, or Cat6A cables (see pages 41-42-43) with these RJFTV series EMI connectors. If customer wants to use his own cable, please check with us regarding compatibility with our backshells: contact@rjfield.com. We also provide assembled cordsets (see examples below). For this type of solution please provide the configuration needed: length, description of second end… Example of assembled cordset: GROUNDING FINGERS (BAND-IT) 31

ROHS COMPLIANT N RJF TV Through bulkhead receptacles Our RJFTV through bulkhead receptacles can be connected on each side with rugged RJFTV plugs. This system allows mechanical protection and a sealing (IP68 when mated) inside and outside the equipement, and keeps the flexibility offered by panel mount and plug connectors. They can be connected with RJFTV series plugs. Square flange receptacle Plating Metallized insert For coding A Nickel - ROHS compliant No RJF TV B 2 N ISO BRUT * Part number Nickel - ROHS compliant Yes RJF TV B 2 N ISO NI * Olive drab cadmium No RJF TV B 2 G ISO BRUT * Olive drab cadmium Yes RJF TV B 2 G ISO NI * Black Zinc Nickel - ROHS compliant No RJF TV B 2 ZN ISO BRUT * Black Zinc Nickel - ROHS compliant Yes RJF TV B 2 ZN ISO NI * A * ISO BRUT = non conductive insert m ISO NI = conductive insert IMPORTANT NOTE p Possibility of other codings - Please consult us h e n o Jam nut receptacle l Plating Metallized insert Part number Nickel - ROHS compliant No RJF TV B 7 N ISO BRUT * Part number Nickel - ROHS compliant Yes RJF TV B 7 N ISO NI * Olive drab cadmium No RJF TV B 7 G ISO BRUT * Olive drab cadmium Yes RJF TV B 7 G ISO NI * Black Zinc Nickel - ROHS compliant No RJF TV B 2 ZN ISO BRUT * Black Zinc Nickel - ROHS compliant Yes RJF TV B 2 ZN ISO NI * * ISO BRUT = non conductive insert ISO NI = conductive insert 32

ROHS COMPLIANT RJF TV Stand off receptacles These receptacles can be sold directly to your PCB. A compound insures a transversal sealing and good performance in high-vibration environments. The shell of those receptacles are in the “Stand Off” style. They can be connected with RJFTV series plugs. Square flange receptacle Plating available Part number Part number * Nickel - ROHS compliant RJF TV 2S X 5N F459 Olive drab cadmium RJF TV 2S X 5G F459 l o Black Zinc Nickel - ROHS compliant RJF TV 2S X 5ZN F459 Coding A Coding B Coding C Coding D n e * new p/n - before it was RJFTV25GF459 or RJFTV25NF459 Plug h p X to be replaced by the letter of the coding position you need (A, B, C, or D) Main key m A Receptacle PCB LAYOUT Panel drilling Solder face view 3.24 33

W E N Now available with same distance between flange and PCB than the 38999 stand off one. So you can use a 38999 stand off and a RJ45 stand off in the same implementation. Part number: 36542 Plating: olive drab cadmium A m p h e n o l Jam nut receptacle Plating Part number Part Nickel - ROHS compliant RJF TV 7S X 5N F459 number Coding A Coding B Coding C Coding D Olive drab cadmium RJF TV 7S X 5G F459 Plug Black Zinc Nickel - ROHS compliant RJF TV 7S X 5ZN F459 Main key X to be replaced by the letter of the coding position you need (A, B, C, or D) Receptacle 34

PCB LAYOUT Solder side view Panel Drilling W E N Now available with same distance between flange and PCB than the 38999 stand off one. So you can use a 38999 stand off and a RJ45 stand off in the same implementation. l o n e h p m A Part number: 36540 Jam nut receptacle, olive drab cadmium plating. PCB LAYOUT Solder side view 35

ROHS COMPLIANT N, B & BZ RJF TV Transversally sealed receptacles In some applications, a transversal sealing for the receptacle is a « must ». This will prevent fluids and dust from going through the receptacle when plug or cap are not mated to the receptacle. The sealed solution (version "S") has a compound at the rear of the receptacle as shown on the picture. The Sealed RJF TV has been successfully tested in very high vibration corresponding to airplane applications. Applications Main characteristics n Outdoor equipment n Same as the RJF TV series. n Airplanes equipment n A complete IP68 sealing of the receptacle (even with no plug or no n Tactical radios protective cap mated) is added. n Shelters n Outside dimensions are the same as the standard RJF TV series. n Rugged computers n Vibrations: the compounded versions of the RJF TV have been tested in n D ata acquisition and transmission in harsh vibration following the NAS 1599 Aeronautic specification (Ambient tem- environments perature): 5 - 3000 Hz, 20g, 2,5 mm [.1 inch] double amplitude, 3 axes, 12 hours Data transmission Note: this specification exceeds MIL-C-26500 requirements. 10 BaseT, 100 BaseTX and 1000 BaseT networks Cat 5e per TIA/EIA 568B and ClassD per ISO/IEC 11801 IMPORTANT NOTE Due to the compound, the coding of the connector must be done in the factory : use the codes A, B, C or D in the part number: see below. Coding A Coding B Coding C Coding D A Main key m p Receptacle h e n o l Example : RJFTV 2S A2 G 15 100BTX Part number code Series RJF TV 7S A 2 G 03 100BTX RJFTV: MIL-DTL-38999 Series III Shell type 2S: sealed square flange receptacle 7S: sealed jam nut receptacle Coding A,B,C,D Back terminations (for receptacles only) 1: female RJ45 1RA: right angle female RJ45 2: RJ45 Cordset Shell material & finish N: aluminium shell - nickel plating - ROHS compliant ZN: aluminium shell - black zinc nickel plating - ROHS compliant G: aluminium shell - olive drab cadmium plating BZ: marine bronze shell - ROHS compliant Nota: receptacle inserts are metallized Cordset length (For Receptacles with “2” Back Termination only) - Other lengths are available on demand 03 100 BTX: 0.3m [11.81 inches] 05 100 BTX: 0.5m [19.68 inches] 10 100 BTX: 1m [39.37 inches] 15 100 BTX: 1.5m [59.05 inches] xx OPEN: open cable - with no plug at the end (xx to be replaced by the cordset length 03, 05, 10, or 15 - see above) Remark: cabling configuration: 100 BTX = 568B (Ethernet specification) Examples: - series III, sealed jam nut receptacle, A coding, with female RJ45 back termination, olive drab cadmium plating: RJF TV 7SA 1 G - series III, sealed jam nut receptacle, A coding, 1.5m [59.05”] 100 BTX cordset, olive drab cadmium plating: RJF TV 7SA 2 G15 100BTX 36

ROHS COMPLIANT N, B & BZ RJF TV Hermetic receptacles In some applications, a transversal hermiticity for the receptacle is a « must ». This will prevent gas from going through the receptacle when plug or cap are not mated to the receptacle. The hermetic solution (version "H") has a compound at the rear of the receptacle as shown on the picture. Helium leakage is less than 1.10-6 cm3 per second [0.1 micron cubic ft per hour] at one bar [15 psi] pressure differential. Applications Main characteristics n Outdoor equipment n Same as the RJF TV series. n Airplanes equipment n A complete IP68 sealing of the receptacle (even with no plug or no n Tactical radios protective cap mated) is added. n Shelters n Outside dimensions are the same as the standard RJF TV series. n Rugged computers n Vibrations: the compounded versions of the RJF TV have been tested in n D ata acquisition and transmission in harsh vibration following the NAS 1599 Aeronautic specification (Ambient tem- environments perature): 5 - 3000 Hz, 20g, 2,5 mm [.1 inch] double amplitude, 3 axes, 12 hours Data transmission Note: this specification exceeds MIL-C-26500 requirements. 10 BaseT, 100 BaseTX and 1000 BaseT networks Cat 5e per TIA/EIA 568B and ClassD per ISO/IEC 11801 IMPORTANT NOTE Due to the compound, the coding of the connector must be done in the factory: use the codes A, B, C or D in the part number: see below. Coding A Coding B Coding C Coding D ol Main key n e h Receptacle p m A Example : RJFTV 2H A2 N 15 100BTX Part number code Series RJF TV 7H A 2 G 03 100BTX RJFTV: MIL-DTL-38999 series III Shell type 2H: transversally sealed and hermetic square flange receptacle 7H: transversally sealed and hermetic jam nut receptacle Coding A,B,C,D Back terminations (for receptacles only) 1: female RJ45 1RA: right angle female RJ45 2: RJ45 Cordset Shell material & finish N: aluminium shell - nickel plating - ROHS compliant ZN: aluminium shell - black zinc nickel plating - ROHS compliant G: aluminium shell - olive drab cadmium plating BZ: marine bronze shell - ROHS compliant Nota: receptacle inserts are metallized Cordset length (for receptacles with “2” back termination only) - Other lengths are available on demand 03 100 BTX: 0.3m [11.81 inches] 05 100 BTX: 0.5m [19.68 inches] 10 100 BTX: 1m [39.37 inches] 15 100 BTX: 1.5m [59.05 inches] xx OPEN: open cable - with no plug at the end (xx to be replaced by the cordset length 03, 05, 10, or 15 - see above) Remark: cabling configuration: 100 BTX = 568B (Ethernet specification) Examples: - Series III, sealed jam nut receptacle, A coding, with female RJ45 Back termination, olive drab cadmium plating: RJF TV 7HA 1 G - Series III, sealed jam nut receptacle, A coding, 1.5m [59.05”] 100 BTX cordset, olive drab cadmium plating : RJF TV 7HA 2 G15 100BTX 37

N E W RJF TV Special plug for big insulation wire up to 1.6 mm. Special RJF TV plug dedicated to Ethernet cable with insulation wire from 1,1 to 1,6 mm. Remark: - compatible with any RJF TV receptacle - for cables which are not compatible with standard RJ45 plug Main characteristics n Sealed against fluids and dusts (IP68) n Shock, vibration and traction resistant n No cabling operation in field and no tools required n Mechanical coding / Polarization (4 positions) n Improved EMI protection n T ri Start Thread coupling mechanism (MIL-DTL-38999 series III type) Applications with anti-decoupling device - Shell size 19 n Robotics n Robust metallic shells n Industrial process control n RJ45 cordset retention in the plug: 100 N in the axis n CNC machines n Mating cycles: 500 min n Special machines n Co mpatible with cable diameter from 6 mm [0.236 in] to 13 mm [0.512 in], n Oil & Gas for smaller diameters please consult us n Motion control n Data acquisition and transmission in harsh Environmental protection environment n Sealing: IP68 n Tele-maintenance n Salt spray: 48 h with nickel plating > 96 h with black coating > 500 h with olive drab cadmium n Fire retardant/Low smoke: UL94 V0 and NF F 16 101 & 16 102 Data transmission n Vibrations: 10 – 500 Hz, 10 g, 3 axes: no discontinuity > 10 nano s. A m 10 BaseT, 100 BaseTX and 1000 BaseT networks n Shocks: IK06 ►weight of 250 g drop from 40 cm [15.75 in] onto connectors Cat 5e per TIA/EIA 568B and ClassD per ISO/IEC (mated pair) p h 11801 n Humidity: 21 days, 43°C, 98% humidity e n Temperature range: - 40°C / +85°C n o l SPECIAL RJ45 PLUG FOR ISOLATION WIRE UP TO 1,6 MM 56 [2.2] 41 [1.61] Plating P/N Part Nickel - ROHS compliant 35660 number Olive drab cadmium 35660G Black Zinc Nickel - ROHS compliant 35660ZN 38

N E W RJ45/M12 adaptor RJ45/M12 adaptors allow to give an access point with RJ45 on M12 D coded based networks. Especially used in Railway applications. Part number : 35655 Nickel plating. l o n e h p m A M12-D RJ45 contact position 1 1 2 3 3 2 4 6 39

N E W Special RJ45 adaptor For Military & Commercial Aeronautics At the rear of the adaptor, the connection is for connectors type EN3646. Adaptor RJ45 only Coding Part 35629 N number 35632 Y Adaptor RJ45 + Self Closing Cap A m p h e n o Coding l Part 35630 N number 35631 Y 4 HOLES For all options: Panel Drilling 12-10 Male contact Coding N EN3155 Coding Y 40

ROHS COMPLIANT CAT 5E CABLE High reliability Cat 5e Ethernet cable & cordsets General construction A 4 pair, 24 AWG, 100 Ohm SFTP round patch cable, designed to the ISO / IEC 11801 Category 5e requirements (cat 5e on 76m). The cable contains 4 twisted pairs, cabled, double shielded with kevlar reinforcement strands, jacketed in black UV resistant Polyurethane HFFR. Designed for fixed or portable applications in harsh environments. HFFR: Halogen Free Flame Retardant Jacket compound specification: - Halogen free flame retardant polyether-based polyurethane - Glossy finish - Excellent hydrolysis resistance - UV resistant Applications - Resistance to microbial/fungus growth acc. IEC60068-2-10 - High flexibility n Robotics Environmental Testing – Test J degree of mould growth 1 n Motion control n Railways nnn CBInaNdtCtue smltfriaeiacldlh p icnrooemcsemssu cnoicnattriooln t h(we icthaDobaulteta aRsl Jofo4nr5e polnulgy) Electrical characteristics (at 20°C - 68°F) Physical characteristics DC Resistance 96 Ohms/Km CONDUCTORS 24 AWG (0,25 mm²) tinned Impedance (1-100 MHz) 100 +/- 15 Ohms copper, 7x0.20 mm INSULATION Color coded 568-B, linear low Insertion loss N.E.X.T. Density Polyethylene, Frequency (dB/100m) (Near-End Crosstalk Loss) Nom. Dia. 0,039” (1mm) 772 KHz 2.70 dB 64 dB min. ASSEMBLY Pairs cabled with Kevlar strength members and separation tape 1 MHz 3.15 dB 62 dB min. wrapped 4 MHz 6.45 dB 53 dB min. SHIELDS Inner: aluminium mylar 100% coverage 10 MHz 9.90 dB 47 dB min. Outer: tinned copper braid 80% coverage 16 MHz 12.3 dB 44 dB min. l o JACKET Black, special PUR compound 20 MHz 13.8 dB 42 dB min. n e WEIGHT 40 lbs / mft (59 kg/km) 31.25 MHz 17.7 dB 40 dB min. h p OUTSIDE DIAM. 0.28” (7.1 mm) nom. 62.5 MHz 25.6 dB 35 dB min. m MIN BEND RADIUS 67.5mm (9x O. D.) 100 MHz 33 dB 32 dB min. A (During installation) MIN BEND RADIUS 37.5mm (5 x O.D.) Capacitance (1 kHz) 46nF/km nom. (During operation) LCL 43 dB min. @ 64 KHz MIN FLEXES TO FAILURE Passes IEC 61156-6 requirements 3.4 pF/m max. @ 1KHz TEMPERATURE Transport and fixed installation : Capacitance unbalance (wire to ground) -50°C (-58°F) up to + 85°C (185°F) Insulation resistance 150 M Ohm min. Installation and flexible use : -40°C (-40°F) up to + 85°C (185°F) Voltage rating 230 VMS Dielectric strength VAC/1 min - 700 V/Min Cordsets with a RJ45 plug overmolded on each end Length (m/ft) Part number Propagation delay (100 MHz) 5.2 ns/m max. 0,76 m / 2,5 ft RJF SFTP 5E 0076 20 ns/100m max. @ 1-100 1,00 m / 3.28 ft RJF SFTP 5E 0100 Delay skew MHz 1,52 m / 5 ft RJF SFTP 5E 0152 Resistance unbalance 3% max. 3,05 m / 10 ft RJF SFTP 5E 0305 4,57 m / 15 ft RJF SFTP 5E 0457 Structural return loss (1-20 MHz) 23db/100m min. 5,00 m / 16.4 ft RJF SFTP 5E 0500 Spark test (tested during 6,00 m / 19.68 ft RJF SFTP 5E 0600 3 KV production) 6,24 m / 20.46 ft RJF SFTP 5E 0624 7,62 m / 25 ft RJF SFTP 5E 0762 Velocity of propagation 67% nom. 8,00 m / 26.24 ft RJF SFTP 5E 0800 10,00 m / 32.78 ft RJF SFTP 5E 1000 14,00 m / 45.92 ft RJF SFTP 5E 1400 15,25 m / 50 ft RJF SFTP 5E 1525 Reel of cable (without RJ45 plug on ends) 22,87 m / 75 ft RJF SFTP 5E 2287 30,5 m / 100 ft RJF SFTP 5E 3050 Length (m / ft) Part number 45,75 m / 150 ft RJF SFTP 5E 4575 100 m / ~328 ft 190-038045-00 50,00 m / 164 ft RJF SFTP 5E 5000 61,00 m / 200.08 ft RJF SFTP 5E 6100 300 m / ~984 ft 190-038045-01 41

ROHS N E W COMPLIANT CAT 6 CABLE High reliability Cat 6 Ethernet cable & cordsets General construction A 4 pairs, 26 AWG, 100 Ohm SFTP round patch cable, designed to the ISO / IEC 11801 Category 6 requirements. The cable contains 4 twisted pairs individually shielded, cabled, double shielded with kevlar reinforcement strands, jacketed in black UV resistant Polyurethane HFFR. Designed for fixed or portable applications in harsh environments. HFFR: Halogen Free Flame Retardant Jacket compound specification: - Halogen free flame retardant polyether-based polyurethane - Glossy finish - Excellent hydrolysis resistance - UV resistant - Resistance to microbial/fungus growth acc. IEC60068-2-10 - High flexibility Environmental Testing – Test J degree of mould growth 1 Physical characteristics Datas for the cable Applications alone only (without RJ45 plug) n Robotics n CNC machines Conductors 26 AWG (0,14 mm²) tinned copper n Motion control n Battlefield communication Insulation Polyethylene Nom. Dia. 0,039” (1mm) n Railways n Industrial process control Assembly Pairs cabled with Kevlar strength members and separation tape wrapped Electrical characteristics (at 20°C - 68°F) Shields Inner: aluminium mylar 100% coverage DC Resistance 290 Ohm/Km Outer: tinned copper braid 80% coverage Impedance (100 MHz) 100 +/- 5 Ohm Jacket Black, special PUR compound Weight 36.9 lbs / mft (55 kg/km) Insertion loss N.E.X.T. Frequency (dB/100m) (Near-End Crosstalk Loss) Outside diam. 0.272” (6.9 mm) nom. 1 MHz 3.1 dB 75.3 dB min. Min bend radius 72mm (10x O. D.) (During 4 MHz 5.8 dB 66.3 dB min. installation) 8 MHz 8.0 dB 61.8 dB min. MIn bend radius 36mm (5 x O.D.) A 10 MHz 9.0 dB 60.3 dB min. (During operation) m 16 MHz 11.4 dB 57.2 dB min. Min flexes to Passes IEC 61156-6 requirements p h 20 MHz 12.8 dB 55.8 dB min. failure e n 25 MHz 14.1 dB 54.3 dB min. Temperature Transport and fixed installation : -50°C (-58°F) up to + 85°C (185°F) o l 31.25 MHz 16.1 dB 52.8 dB min. Installation and flexible use : -40°C (-40°F) up to + 85°C (185°F) 62.5 MHz 23.2 dB 48.4 dB min. 100 MHz 29.9 dB 45.3 dB min. Cordsets with a RJ45 plug overmolded on each end Length (m/ft) Part number 200 MHz 43.7 dB 40.8 dB min. 0,75 m / 2,46 ft RJF SFTP 6 0075 250 MHz 49.7 dB 39.3 dB min. 1,00 m / 3,28 ft RJF SFTP 6 0100 1,50 m / 4,92 ft RJF SFTP 6 0150 2,00 m / 6,56 ft RJF SFTP 6 0200 Capacitance (1 kHz) 50nF/km nom. 2,50 m / 8,20 ft RJF SFTP 6 0250 Capacitance unbalance 1600 pF/km max. 3,00 m / 9,84 ft RJF SFTP 6 0300 Insulation resistance 5 GOhm/km 3,50 m / 11,48 ft RJF SFTP 6 0350 4,00 m / 13,12 ft RJF SFTP 6 0400 Voltage rating (peak) 230 V 4,50 m / 14,76 ft RJF SFTP 6 0450 Dielectric strength VAC/1 min - 700 V/Min 5,00 m / 16,40 ft RJF SFTP 6 0500 6,00 m / 19,68 ft RJF SFTP 6 0600 Propagation delay 4.6 ns/m 7,00 m / 22,96ft RJF SFTP 6 0700 Skew 45 ns/100m 8,00 m / 26,24 ft RJF SFTP 6 0800 9,00 m / 29,52 ft RJF SFTP 6 0900 Resistance unbalance 2% 10,00 m / 32,80 ft RJF SFTP 6 1000 Return loss (250 MHz) 15.6dB 15,00 m / 49,20 ft RJF SFTP 6 1500 Velocity of propagation 72% nom. 20,00 m / 65,60 ft RJF SFTP 6 2000 25,00 m / 82,00 ft RJF SFTP 6 2500 30,00 m / 98,40 ft RJF SFTP 6 3000 Reel of cable (without RJ45 plug on ends) 35,00 m / 114,80 ft RJF SFTP 6 3500 Length (m / ft) Part number 40,00 m / 131,20 ft RJF SFTP 6 4000 45,00 m / 147,60 ft RJF SFTP 6 4500 100 m / ~328 ft 191-031179-00 50,00 m / 164,00 ft RJF SFTP 6 5000 300 m / ~984 ft 191-031179-01 60,00 m / 196,80 ft RJF SFTP 6 6000 42

ROHS N E W COMPLIANT CAT 6A CABLE High reliability Cat 6A Ethernet cable & cordsets General construction A 4 pairs, 26 AWG, 100 Ohm SFTP round patch cable, designed to the ISO / IEC 11801 Category 6A requirements. The cable contains 4 twisted pairs individually shielded, cabled, double shielded with kevlar reinforcement strands, jacketed in black UV resistant Polyurethane HFFR. Designed for fixed or portable applications in harsh environments. HFFR: Halogen Free Flame Retardant Jacket compound specification: - Halogen free flame retardant polyether-based polyurethane - Glossy finish - Excellent hydrolysis resistance - UV resistant - Resistance to microbial/fungus growth acc. IEC60068-2-10 - High flexibility Environmental Testing – Test J degree of mould growth 1 Physical characteristics Applications n Robotics Conductors 26 AWG (0,14 mm²) tinned copper nn MRaoiltwioany scontrol t h(we icthaDobaulteta aRsl Jofo4nr5e polnulgy) IAnsssuelmatbiolyn DNPaoeinmrss .ic tDaybi aPl.oe 0dly, 0ew3tih9thy” l( eK1nemevm,la)r strength n CNC machines members and separation tape wrapped n Battlefield communication Shields Inner: aluminium mylar 100% coverage n Industrial process control Outer: tinned copper braid 80% coverage Jacket Black, special PUR compound Electrical characteristics (at 20°C - 68°F) Weight 36.9 lbs / mft (55 kg/km) DC Resistance 290 Ohm/Km Outside diam. 0.272” (6.9 mm) nom. Impedance (100 MHz) 100 +/- 5 Ohm Min bend radius 72mm (10x O. D.) (During Insertion loss N.E.X.T. Frequency installation) (dB/100m) (Near-End Crosstalk Loss) 1 MHz 3.1 dB 75.3 dB min. MIn bend radius 36mm (5 x O.D.) l 4 MHz 5.7 dB 66.3 dB min. (During operation) o n 8 MHz 8.0 dB 61.8 dB min. Min flexes to Passes IEC 61156-6 requirements e h 10 MHz 8.9 dB 60.3 dB min. failure p 16 MHz 11.2 dB 57.2 dB min. Temperature Transport and fixed installation : m 20 MHz 12.6 dB 55.8 dB min. -50°C (-58°F) up to + 85°C (185°F) A 25 MHz 14.1 dB 54.3 dB min. Installation and flexible use : -40°C (-40°F) up to + 85°C (185°F) 31.25 MHz 15.8 dB 52.8 dB min. 62.5 MHz 22.5 dB 48.4 dB min. Cordsets with a RJ45 plug overmolded on each end 100 MHz 28.7 dB 45.3 dB min. Length (m/ft) Part number 200 MHz 41.4 dB 40.8 dB min. 0,75 m / 2,46 ft RJF SFTP 6A 0075 250 MHz 46.6 dB 39.3 dB min. 1,00 m / 3,28 ft RJF SFTP 6A 0100 300 MHz 51.4 dB 38.1 dB min. 1,50 m / 4,92 ft RJF SFTP 6A 0150 400 MHz 60.1 dB 36.3 dB min. 2,00 m / 6,56 ft RJF SFTP 6A 0200 500 MHz 67.9 dB 34.8 dB min. 2,50 m / 8,20 ft RJF SFTP 6A 0250 3,00 m / 9,84 ft RJF SFTP 6A 0300 Capacitance (1 kHz) 50nF/km nom. 3,50 m / 11,48 ft RJF SFTP 6A 0350 Capacitance unbalance 1600 pF/km max. 4,00 m / 13,12 ft RJF SFTP 6A 0400 4,50 m / 14,76 ft RJF SFTP 6A 0450 Insulation resistance 5 GOhm/km 5,00 m / 16,40 ft RJF SFTP 6A 0500 Voltage rating (peak) 230 V 6,00 m / 19,68 ft RJF SFTP 6A 0600 Dielectric strength VAC/1 min - 700 V/Min 7,00 m / 22,96ft RJF SFTP 6A 0700 Propagation delay 4.6 ns/m 8,00 m / 26,24 ft RJF SFTP 6A 0800 Skew 45 ns/100m 9,00 m / 29,52 ft RJF SFTP 6A 0900 Resistance unbalance 2% 10,00 m / 32,80 ft RJF SFTP 6A 1000 Return loss (500 MHz) 15.6dB 15,00 m / 49,20 ft RJF SFTP 6A 1500 20,00 m / 65,60 ft RJF SFTP 6A 2000 Velocity of propagation 72% nom. 25,00 m / 82,00 ft RJF SFTP 6A 2500 Reel of cable (without RJ45 plug on ends) 30,00 m / 98,40 ft RJF SFTP 6A 3000 35,00 m / 114,80 ft RJF SFTP 6A 3500 Length (m / ft) Part number 40,00 m / 131,20 ft RJF SFTP 6A 4000 100 m / ~328 ft 191-031190-00 45,00 m / 147,60 ft RJF SFTP 6A 4500 50,00 m / 164,00 ft RJF SFTP 6A 5000 300 m / ~984 ft 191-031190-01 60,00 m / 196,80 ft RJF SFTP 6A 6000 43

NOTES .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. A .............................................................................................................................................................................................................................................................................................. m p .............................................................................................................................................................................................................................................................................................. h e n .............................................................................................................................................................................................................................................................................................. o l .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. 44

Rugged Ethernet Solutions Cable assemblies l o n e h p m A Table of contents NEW RJ45/M12: Ethernet railway cable solution .................................................................................................................................................................. 46 NEW JUMPER railway intercoach ......................................................................................................................................................................... 47 45

N E W RJ45/M12: Ethernet railway cable solution Part number: Kit 36516 - Length 7 m [22.96 ft] Part number: Kit 36520 - Length 1 m [3.28 ft] A m p h M12 D Coding e n o l Part number: Kit 36530 - Length 4 m [13.12 ft] For all options: 46

ROHS N E W COMPLIANT N JUMPER railway intercoach Derived from RJFTV Series Note: for technical characteristics, please refer to RJFTV page 26. Kit 40426 includes: - 2 RJF TV plugs with EMI backshell assembled (coding A) - 1 RJF SFTP cable cat 5E high reliability - 1 conduit PCST-17B - 2 PMAFIX straight, PG metal thread L +100 P/N 0 Part number 2465 Kit 40426 Rep 101 3010 Kit 40426 Rep 102 For any other lenght, please consult us: contact@rjfield.com l o n e h p m A 47

NOTES .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. A .............................................................................................................................................................................................................................................................................................. m p .............................................................................................................................................................................................................................................................................................. h e n .............................................................................................................................................................................................................................................................................................. o l .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. 48

Rugged Ethernet solutions Rugged electronics l o n e h p Table of contents m A Military Ethernet media converter for harsh environment NEW RES-GMC with Expanded Beam technology: military Ethernet media converter, fully MIL-STD compliant ............................................................ 50 RES-GMC with butt joint fiber connector: military Ethernet media converter, fully MIL-STD compliant ......................................................... 52 RJS-GMC with Expanded Beam Technology : military Ethernet Media Converter with industrial EMI compliancy ............................. 54 RES-GMC-1M-FORC: military Ethernet media converter with remote control, fully MIL-STD compliant ............................................................ 56 NEW Military Ethernet switch for harsh environment, fully MIL-STD compliant RES-SCE-AC-8US: unmanaged miniature portable Ethernet switch - 8 fast ports ............................................................................................. 58 RES-SCE-8MG: managed miniature portable Ethernet switch - 8 Gigabit ports ................................................................................................. 60 RESMLAC-8US-CAPS: unmanaged military Ethernet switch, MIL-DTL-38999 connectors - 8 fast ports .................................................... 62 RJSMLAC-8UG-CAPS: unmanaged military Ethernet switch, RJFTV connectors - 8 Gigabit ports ............................................................... 64 RJSMLAC-8MG-CAPS: managed military Ethernet switch, RJFTV connectors - 8 Gigabit ports ................................................................... 66 RESMLAC-8MG-CAPS: managed military Ethernet switch, MIL-DTL-38999 connectors - 8 Gigabit ports ................................................. 68 RESMLAC-8MG-CAPS F35: managed military Ethernet switch, MIL-DTL-38999 connectors - 8 Gigabit ports ........................................ 70 RESMLAC-28MG: managed military Ethernet switch - 24 Gigabit + 4 combo 10G ports ................................................................................ 72 Military Ethernet switch for harsh environment with industrial EMI compliancy RJSML-8US1 and RJSML-8UG1: unmanaged military Ethernet switch, 8 fast or Gigabit ports......................................................... 75 RJSML-8MF : managed military Ethernet switch - 8 fast ports .................................................................................................................................. 79 RJSML-MG7F3G : managed military Ethernet switch - 7 fast ports + 3 Gigabit ports ......................................................................................... 83 49

RES-GMC with Expanded Beam technology Military Ethernet media converter For harsh environment - Fully MIL-STD compliant Amphenol’s RES-GMC is a MIL-STD rugged, unmanaged-military-grade security gateway, offering up to 2 Gigabit security gateways per device for unidirectional and data diodes solution for total isolation between two network with different security classification. The unit supports PoE on 2 ports (IEEE802.3af and IEEE802.3at). Developed for military and harsh environment applications, the RES-GMC features mechanical packaging enhancements designed for MIL-STD-810F airborne and ground environmental compliance and high reliability. The unit has been especially hardened to improve ingress, impact, and shock/vibration protection, as well as eliminate all moving parts through passive cooling, and interface through sealed MIL-D-38999 circular connectors. Leveraging best-in-class switching technology, the RES-GMC series serves as a robust solution to extend your Tactical Gigabit Ethernet network connectivity of up to 120Km over fiber. Compact in size, the RES-GMC is particularly useful for remote and space-constrained locations either on ground vehicle environments or airborne. Military applications n Data acquisition & transmission n Battlefield communication C4ISR n Rugged Networks n Combat vehicles n Avionic & shipboard systems Key features n Ethernet ports n 1 or 2 ports 10/100/1000 or 10/100 Base TX A n 1 or 2 ports 1000 or 100 Base FX/SX/LX or WDM single fiber m n Version 2x2 ports: total isolation between the 2 networks p h e n n Networking o l n Full wire-speed forwarding rate n Option for Up to 2 ports PoE - IEEE802.3af, IEEE802.3at n Store-and-forward or Pass through mechanism n Auto MDI-II, MDI-X, FDX, HDX, Flow control n Auto-negotiation and fixed settings via DIP switch n Jumbo frame support n Link loss forwarding mechanism n Connectors n LAN connector type: - Models 1x1 ports: RJFTV - Models 2x2 ports: D38999/24WB35SN n Fiber connector type: CTOS 77PC or TACBeam EB4H8000. 2 fibers are used for 1x1 ports versions. 4 fibers are used for 2x2 ports versions. n Chassis n Low profile rugged aluminium extrusion n Conductively cooled w/custom internal heat-sinks n Ingress protection against sand, dust and moisture n Epoxy-Polyamide Paint, Per MIL-C-83286, matt texture, color: Nato green n Standards n MIL-STD-1275, MIL-STD-704A, MIL-STD-461E, n MIL-STD-810F GM, IP67/68 50

Dim e nsional line drawing Product specifications All me a surements are in millimeters Performance • 26.8 Mpps wire speed forwarding rate •• 24 KG MbpAsC m adaxdirmesusm forwarding bandwidt h • 2 LED indication (Speed, Link/Activity) p er port • Wire-speed reception and transmission Standards compliance • IEEE 802.3, 10 Mbps 10BASE-T (Ethernet) •• IIEEEEEE 880022..33uab, 1, 10000 B0ABSaEs-eT-XT X100 Mbps (Fast Ethernet) • IEEE 802.3z, 1000Base-FX Gigabit • IEEE 802.3x Flow control Voltage input • VDC versions: 24VDC nominal (18-32VDC) • VAC versions: 90-265 VAC / 47-65 Hz • PoE versions: 48VDC Electromagnetic • MIL-STD-461E Electromagnetic compatibility • CE-102, CS-114, CS-115, CS-116, RE-102, RS-103 Environmental : shock/vibration/humidity • MIL-STD-810F, 501.4I, 501.4II, 502.4I, 502.4II, 507.4, 500.4II, 514, 516I, 516VI, 514.5, 512.4 • IP67/68 Physical • Dimensions: 210mm (L) x 151mm (W) x 59mm (H), including connectors & hardware • Weight: 1.260 kg Installation • Set of Four 4x4.5 mounting holes on bottom for mounting to any flat surface. ol • Carrying handles - Optional n Cooling AAlll lm meeaassuurreemmNNeoeontnt ttttosos s a sacrcareaele lie n in m milliilmlimeteetresr s he • No moving parts. Passive cooling. p Operating temp Am • -35°C to +75°C (-31°F to +167°F) / -35°C Cold All m easurements are in millimeters Not to scale start-up Storage temp • -45°C to +85°C (-49°F to +185°F) Part number code RESGMC 1M G RJF 1CTOS OD DC Ports and type of optical fiber 1M 1 copper port and 1 optical fiber port, Multimode 1S 1 copper port and 1 optical fiber port, Singlemode 2M 2 copper port and 2 optical fiber port, Multimode 2S 2 copper port and 2 optical fiber port, Singlemode Datarate G 10/100/1000TX to 1000 Mbps on fiber side 100 10/100TX to 100 Mbps on fiber side Copper LAN connectors RJF RJFTV connector, RJ45 with MIL-DTL-38999 III Thread coupling mechanism (for 1x1 ports versions) TV MIL-DTL-38999 III connector, arrangement 11-35S (for 1x1 ports versions) 2TV MIL-DTL-38999 III connector, arrangement 11-35S (for 2x2 ports versions) Optical fiber connectors 1CTOS CTOS connector with expanded beam, for intensive use in harsh environments, STANAG 4290 1TACB TACBEAM connector with expanded beam, M83526/20&21 Protection of connectors OD All connectors and caps are plated with Olive drab Cadmium NI All connectors and caps are plated with Nickel (RoHs compliant MC) Voltage input DC Unit powered with 18-36VDC VAC Unit powered with 90-265 VAC / 47-65 Hz PoE Unit powered with Power over Ethernet For specific cable harnesses, please consult us. 51

RES-GMC with butt joint fiber connector Military Ethernet media converter For harsh environment - Fully MIL-STD compliant Amphenol’s RES-GMC is a MIL-STD rugged, unmanaged-military-grade security gateway, offering up to 2 Gigabit security gateways per device for unidirectional and data diodes solution for total isolation between two network with different security classification. The unit supports PoE on 2 ports (IEEE802.3af and IEEE802.3at). Developed for military and harsh environment applications, the RES-GMC features mechanical packaging enhancements designed for MIL-STD-810F airborne and ground environmental compliance and high reliability. The unit has been especially hardened to improve ingress, impact, and shock/vibration protection, as well as eliminate all moving parts through passive cooling, and interface through sealed MIL-D-38999 circular connectors. Leveraging best-in-class switching technology, the RES-GMC series serves as a robust solution to extend your Tactical Gigabit Ethernet network connectivity of up to 120Km over fiber. Compact in size, the RES-GMC is particularly useful for remote and space-constrained locations either on ground vehicle environments or airborne. Military applications n Data acquisition & transmission n Battlefield communication C4ISR n Rugged Networks n Combat vehicles n Avionic & shipboard systems Key features n Ethernet ports n 1 or 2 ports 10/100/1000 or 10/100 Base TX n 1 or 2 ports 1000 or 100 Base FX/SX/LX or WDM single fiber n Version 2x2 ports: total isolation between the 2 networks A m n Networking p n Full wire-speed forwarding rate h e n Option for Up to 2 ports PoE - IEEE802.3af, IEEE802.3at n o n Auto MDI-II, MDI-X, FDX, HDX, Flow control l n Auto-negotiation and fixed settings via DIP switch n Jumbo frame support n Option for one way fiber security n Connectors n LAN connector type: - Models 1x1 ports: RJFTV - Models 2x2 ports: D38999/24WB35SN n Fiber connector type: TVOP arrangement 11-02. 2 fibers are used for 1x1 ports versions. 4 fibers are used for 2x2 ports versions. n Chassis n Low profile rugged aluminium extrusion n Conductively cooled w/custom internal heat-sinks n Ingress protection against sand, dust and moisture n Epoxy-Polyamide Paint, Per MIL-C-83286, matt texture, color: Nato green n Standards n MIL-STD-1275, MIL-STD-704A, MIL-STD-461E, n MIL-STD-810F GM, IP67/68 52

Dimensional line drawing Product specifications All measurements are in millimeters Performance • 26.8 Mpps wire speed forwarding rate • 20 Gbps maximum forwarding bandwidth • 4K MAC address • 2 LED indication (Speed, Link/Activity) per port • Wire-speed reception and transmission Standards compliance • IEEE 802.3, 10 Mbps 10BASE-T (Ethernet) • IEEE 802.3u, 100 BASE-TX 100 Mbps (Fast Ethernet) • IEEE 802.3ab, 1000Base-TX • IEEE 802.3z, 1000Base-FX Gigabit • IEEE 802.3af, IEEE802.3at Voltage input - VDC versions: 24VDC nominal (18-32VDC) - VAC versions: 90-265 VAC / 47-65 Hz - PoE versions: 48VDC Electromagnetic • MIL-STD-461E Electromagnetic compatibility • CE-102, CS-114, CS-115, CS-116, RE-102, RS-103 Environmental : shock/vibration/humidity • MIL-STD-810F, 501.4I, 501.4II, 502.4I, 502.4II, 507.4, 500.4II, 514, 516I, 516VI, 514.5, 512.4 • IP67/68 Physical • Dimensions: 170mm(L) x 150(W) x 65(H), including connectors & hardware • Weight: 1 kg Installation • Set of Four 4x4.5 mounting holes on bottom for mounting to any flat surface. • Carrying handles - Optional Cooling • No moving parts. Passive cooling. Operating temp l • -35°C to +75°C (-31°F to +167°F) / -35°C Cold o n start-up e h Storage temp p • -45°C to +85°C (-49°F to +185°F) m A Part number code RESGMC 1M G RJF 1TVOP OD DC Ports and type of optical fiber 1M 1 copper port and 1 optical fiber port, Multimode 1S 1 copper port and 1 optical fiber port, Singlemode 2M 2 copper port and 2 optical fiber port, Multimode 2S 2 copper port and 2 optical fiber port, Singlemode Datarate G 10/100/1000TX to 1000 Mbps on fiber side 100 10/100TX to 100 Mbps on fiber side Copper LAN connectors RJF RJFTV connector, RJ45 with MIL-DTL-38999 III Thread coupling mechanism (for 1x1 ports versions) TV MIL-DTL-38999 III connector, arrangement 11-35S (for 1x1 ports versions) 2TV MIL-DTL-38999 III connector, arrangement 11-35S (for 2x2 ports versions) Optical fiber connectors 1TVOP 1x TVOP connector with butt joint, arrangement 11-02 (for 1x1 ports versions) 2TVOP 2x TVOP connectors with butt joint, arrangement 11-02 (for 2x2 ports versions) Protection of connectors OD All connectors and caps are plated with Olive drab Cadmium NI All connectors and caps are plated with Nickel (RoHs compliant MC) Voltage input DC Unit powered with 18-36VDC VAC Unit powered with 90-265 VAC / 47-65 Hz PoE Unit powered with Power over Ethernet For specific cable harnesses, please consult us. 53

RJS-GMC with Expanded Beam technology Military Ethernet Media Converter For harsh environment - with industrial EMI compliancy Amphenol’s RJS-GMC is a rugged, military-grade Ethernet media converter. Developed for military and harsh environment applications, the RJS-GMC features mechanical packaging enhancements designed for MIL-STD-810F ground environmental compliance and high reliability. The unit has been especially hardened to improve ingress, impact, and shock/vibration protection, as well as eliminate all moving parts through passive cooling. The interfaces are protected through sealed RJFTV MIL-D-38999 circular connectors and CTOS expanded beam fiber optics connectors. The conductive cadmium plating is suitable for most demanding EMI-RFI environments. Black paint is also offered when RoHS is required (other colors available). Leveraging industrial grade switching technology, the RJS-GMC series serves as a robust and cost efficient solution to extend your Tactical Gigabit Ethernet network connectivity over fiber optics. The RJS-GMC is already widely use for training and combat simulation of troops. Military applications n Battlefield communication C4ISR n Rugged Networks n Combat simulation & training of troops n Combat vehicles Key features n Ethernet ports n 1, 2 or 4 ports 10/100/1000 BaseTX n 1, 2 or 4 ports 1000 Base FX/SX/LX n Versions 2x2 and 4x4 ports: total isolation between the networks n Networking n Full wire-speed forwarding rate A n Store-and-forward or Pass through mechanism m n Auto MDI-II, MDI-X, FDX, HDX, Flow control p h n Auto-negotiation enol nn CCnnnnnnnoh nasnsJLPLFRCeiuiiAOusacbnmdtNgWkeomg brlrcE oeosooiRuds pn fsm crtmn aofico emono crcrnlwetdo ope naesrcaurdnstid:npo e aiMtrnpcl utp:goI oLmMr r-rmotDsIitLm:eT e-CcLDciuTh-tT3OimaoL8nS-n93i s9e8mx99p 9IIa9I nR IdIJIFe TdV b eam M DDMM EEIIILLLFF-----SSSSSTTTTTDDDAA --- NN471 --602 56 147M 91 EA5 --I 45fA L 1 o p r CC Do P6SSR EEC0tmwpui 100Ep6rigko03Ve,p0 ee2 Id1rl6sisse n:/0seD:: p01 p.+1lC 0uV540/rstE- V s tV o20ArpD52 atifCo0Ckner es-Vp c5i7k e0ft0-no pmi4trko s1 n0at0 µ0.s5 mΩ n Conductively cooled with internal heat-sinks n Ingress protection against sand, dust and moisture n IP65/IP68 rated n IEEE Ethernet standards n IEEE 802.3/u : 10 Mbps & 100 Mbps Fast Ethernet n IEEE 802.3ab : 1000 Mbps Gigabit Ethernet n IEEE 802.3x : Full-Duplex with Flow Control n Environmental specifications n EMI emissions : FCC Class A, CE, UL, CSA n Operating Temperature: 0°C to +50°C n Storage Temperature: -20°C to +60°C 54

Dimensional line drawing Product specifications All measurements are in millimeters Ethernet features • 1, 2 or 4 shielded RJ45 ports 10/100/1000 BaseT(X) • RJFTV connectors: jam nut receptacle based on MIL-DTL-38999 III • Full / Half Duplex, Automatic or Configurable • RJ45 MDI/MDIX Auto-crossover • RJ45 TD and RD Auto-polarity Dimensions • Version 1x1: 220 x 122 x 80 mm without connectors and caps • Version 2x2: 220 x 122 x 80 mm without connectors and caps • Version 4x4: 360 x 160 x 90 mm without connectors and caps Weight • Version 1x1: approx 1.9 kg • Version 2x2: approx 2.5 kg • Version 4x4: approx 4.5 kg Installation • All versions: Set of 4 mounting holes fixed on the bottom • Version 4x4: carrying handles fixed on the top Power supply Input voltage • DC : 9-36 VDC • DC-704 : 9-33 VDC, reverse voltage protection • VAC : 85/264 VAC, 47/63 Hz Input power • Version 1x1: 3W • Version 2x2: 6W • Version 4x4: 12W Connectors for power • MIL-DTL-38999 III jam nut receptacle, olive drab cadmium or nickel • DC & DC-704 TVx07xx0998PA: 3 cts # 20 (wire AWG 24 to 20) • VAC TVx07xx0998P l o n e h p m A Part number code RJS-GMC ML 1CTOS MG OD DC-CAPS Protection and color ML: Olive Drab Cadmium Plating on enclosure and receptacles BKN: RAL 9005 (Jet Black) Paint on enclosure, Nickel plated receptacles, ROHS compliant ML1019: RAL 1019 (Sand) Paint on enclosure, Olive Drab Cadmium plated receptacles BKN9010: RAL 9010 (White) Paint on enclosure, Nickel plated receptacles, ROHS compliant Number of ports 1CTOS: 1 port LAN to 1 port fiber optics, 1 RJFTV and 1 CTOS connector 2CTOS: 2 ports LAN to 2 ports fiber optics, 2 RJFTV and 2 CTOS connectors 4CTOS: 4 ports LAN to 4 ports fiber optics, 4 RJFTV and 4 CTOS connectors Type of fiber and datarate MG: Multimode, 50/125, Gigabit Ethernet SG: Singlemode, 9/125, Gigabit Ethernet MF: Multimode, 50/125, Fast Ethernet Protection of LAN and Power connectors and caps OD: Olive drab cadmium plating ZN: Black Zinc Nickel (RoHs compliant) NI: Nickel plating, bright (RoHs compliant) Power supply and caps DC-CAPS: 24VDC powered, attached caps on all receptacles DC-704-CAPS: 24VDC powered, with 704 filtering option, attached caps on all receptacles VAC-CAPS: 85-264 VAC, 47-63 Hz, attached caps on all receptacles For specific cable harnesses, please consult us. 55

RES-GMC-1M-FORC Military Ethernet Media Converter with Remote Control For fiber extension of existing systems on the Field Amphenol’s RES-GMC-1M-FORC is a MIL-STD rugged, unmanaged-military-grade Media converter, offering Gigabit communication. Developed for network deployment in harsh environment applications, the RES-GMC-1M-FORC series serves as a robust solution to extend your Tactical Gigabit Ethernet network over fiber. The fiber interface is a CTOS connector with expanded beam, designed for intensive use in severe environments. Combining the 2 units of RES-GMC-1M-FORC with a fiber drum, your network will be extended on the field and remote controlled from safe area through fiber optics. > Simply add 2 media converters unit 1 and unit 2 + a fiber drum Due to extreme low consumption of unit 2 in STANDBY mode, your battery on the field will operate longer. Operation: • Connect the unit 1 to a command or control post in a safe area. • Install the unit 2 together with the deployed system directly on the field, powered by battery through DC IN. • Link the 2 units with an optical fiber harness. • The unit 2 is remote controlled by unit 1. Once unit 1 is powered, it will wake up the unit 2. • The deployed system will be powered from the battery, through DC OUT connector of the unit 2. • Up to 100A can be provided to the deployed system! Military applications n Data acquisition & transmission n Battlefield communication C4ISR n Rugged Networks Unit 1 A n Combat vehicles m Where your system can be extended p through network. h e n o Fiber drum l Key features n Ethernet ports n 10/100/1000 Base TX to 100/1000 Base SX-(MM) Media converter n Networking n Full wire-speed forwarding rate n Store-and-forward or Pass through mechanism n Auto MDI-II, MDI-X, FDX, HDX, Flow control n Auto-negotiation and fixed settings via DIP switch n Jumbo frame support n Link loss forwarding mechanism n Connectors n MIL-D-38999 (Power & Ethernet signals) n Fiber connector type: CTOS 77 PC (2 fibers for Ethernet, 1 fiber for remote Unit 2 control) n Protective caps over each connector n Chassis n Low profile rugged aluminium extrusion n Conductively cooled w/custom internal heat-sinks n Ingress protection against sand, dust and moisture n Epoxy-Polyamide Paint, Per MIL-C-83286, semi-gloss n Color: sand mate n Standards n MIL-STD-1275, MIL-STD-704A, MIL-STD-461E, n MIL-STD-810F GM, IP67/68 56

Dimensional line drawing Product specifications All measurements are in millimeters Performance • 26.8 Mpps wire speed forwarding rate • 2 Gbps maximum forwarding bandwidth • 4K MAC address • 2 LED indication (Speed, Link/Activity) per port • Wire-speed reception and transmission Standards compliance • IEEE 802.3, 10 Mbps 10BASE-T (Ethernet) • IEEE 802.3u, 100 BASE-TX 100 Mbps (Fast Ethernet) • IEEE 802.3ab, 1000Base-TX • IEEE 802.3z, 1000Base-FX Gigabit • IEEE 802.3x Flow control Power • MIL-STD-1275B & MIL-STD-704A Surge and Spike protection • Voltage input: 24Vdc nominal (18-36V) • Power switching of the external DC input of unit 2 upon ON/OFF command from unit 1 • Maximum power consumption: 5W for unit 1, 10W for unit 2 • Standby consumption of unit 2: <0.1W • Chassis grounding • Max power at output of unit 2 (relay) : 100A Electromagnetic • MIL-STD-461E Electromagnetic compatibility Environmental : shock/vibration/humidity • MIL-STD-810F, 501.4I, 501.4II, 502.4I, 502.4II, 507.4, 500.4II, 514, 516I, 516VI, 514.5, 512.4 • IP67/68 Physical • Dimensions: 170mm(L) x 140(W) x 110(H), l o including connectors & hardware n • Weight: 1.55kg for unit 1, 1.80kg for unit 2 e h p Installation m • Set of Four 4x4.3 mounting holes on bottom for A mounting to any flat surface Cooling • No moving parts. Passive cooling Operating temp • -35°C to +75°C (-31°F to +167°F) / -35°C Cold start-up Storage temp • -45°C to +85°C (-49°F to +185°F) Description RES-GMC-1M-FORC-1 MIL-STD Rugged Gigabit Media Converter unit 1, 1x RJF connector, 1x fiber CTOS connector, MM, SX Part number RES-GMC-1M-FORC-2 MIL-STD Rugged Gigabit Media Converter unit 2, 1x RJF connector, 1x fiber CTOS connector, MM, SX, remote controlled by unit 1 CTOS drum Please consult us For specific cable harnesses, please consult us. 57

RES-SCE-AC-8US Unmanaged miniature portable Ethernet switch - 8 fast ports Military ethernet switch for harsh environment - Fully MIL-STD compliant Amphenol’s RES-SCE-AC-8US is a MIL-STD rugged, unmanaged-military-grade Ethernet switch, offering 8 Fast Ethernet 10/100 Ports. The portable rugged Ethernet switch is intended for unmanned vehicles or man packable command post. Developed for SWaP (Size Weight and Power) and mobile portable military applications, the RES-SCE-AC-8US features mechanical packaging enhancements designed for MIL-STD-810F airborne and ground environmental compliance and high reliability. The unit has been especially hardened to improve ingress, impact, and shock/vibration protection, as well as eliminate all moving parts through passive cooling, and interface through sealed MIL-SCE circular connectors. Leveraging best-in-class switching technology, the RES-SCE-AC-8US serves as a robust solution for providing local area network (LAN) connectivity to IP-enabled computing and net-centric devices. Compact in size, the RES-SCE-AC-8US is particularly useful for expanding port density in space-constrained airborne and ground vehicle environments. Military applications n Unmanned Vehicles n Battlefield communication C4ISR n Mobile communications n Avionic & shipboard systems A Key features m p n Ethernet ports SWaP h n 8 x switched 10/100 (Fast Ethernet) ports e n n Networking o l n Full wire-speed forwarding rate n Store-and-forward mechanism n Auto MDI-II, MDI-X n Auto-negotiation protocol n Address look-up n Connectors n Power + LAN connector : SCE2-B-76A06-07SN-001 n Chassis n Low profile rugged aluminium extrusion n Conductively cooled w/ custom internal heat-sinks n Ingress protection against sand, dust and moisture n Epoxy-Polyamide Paint, Per MIL-C-83286, matt tex- ture, color: Nato green n Standards n MIL-STD-461E, MIL-STD-810F/G/GM, IP67/68 n Voltage operation n 5VDC (USB) INPUT, shared with LAN Port Number 1 n Activity status n Indicators for Power and LAN activity (light off by default) n STATUS pushbutton to turn on the indicators 58 MILITARY RUGGED SWITCH MIL-STD-461E MIL-STD-810F/G/GM IP68

Dimensional line drawing Product specifications All measurements are in millimeters Performance • 128K byte of SRAM for frame buffering • 2.0 Gbps high-performance memory bandwidth • LED indication (speed, link/activity) per port - Optional • Wire-speed reception and transmission • Integrated address look-up engine • Automatic address learning Standards compliance • IEEE 802.3 10 Mbps 10BASE-T (Ethernet) • IEEE 802.3u 100BASE-TX 100 Mbps (Fast Ethernet) • IEEE 802.3x flow control Power • Voltage input: 5Vdc nominal - Optional USB sourcing • Power consumption: 2W typical • Chassis grounding Electromagnetic • MIL-STD-461E electromagnetic compatibility • CE-102, CS-114, CS-115, CS-116, RE-102, RS-103 Environmental • MIL-STD-810F/G/GM • Random vibration (514.5I), Bench handling (516.6VI), High temp (501.5I, II), Low temp (502.5I), Humidity (507.5II), Air pressure (500.5I, II), Blowing rain (506.5I), Immersion (512.5I), Salt atmosphere (509.5I), Blowing dust (510.5I), Loose cargo vibration (514.6II), Wind analysis • IP67/68 Physical • Dimensions: 82.2mm (L) x 61.4 (W) x 26 (H), Not including connectors Dust Caps. l o • Weight: 140g - Not including dust caps n e h Installation p • Portable, flat for mounting to any flat surface. m A Cooling • No moving parts. Passive cooling. Operating temp • -35°C to +75°C (-31°F to +167°F) / -35°C Cold start-up Storage temp • -45°C to +85°C (-49°F to +185°F) Part number code Description RES-SCE-AC-8US MIL-STD Portable Unmanaged Ethernet switch with 8 ports 10/100TX RES-SCE-8US-CBL-PWR-2M Power cordset for RES-SCE-AC-8US, 1 side with SCE2B-L1K-0607-PN Latch release, 1 side with 1 USB civilian for power supply, cable 2m long RES-SCE-8US-CBL-LAN-2M LAN cordset for RES-SCE-AC-8US, valid for LAN 2 to 8, 1 side with SCE2B-L1K-0607-PN Latch release, 1 side with RJ45 civilian, cable RJFSFTP5E cat 5E, 2m long For specific cable harnesses, please consult us. 59

RES-SCE-8MG Managed miniature portable Ethernet switch - 8 Gigabit ports Military ethernet switch for harsh environment - Fully MIL-STD compliant Amphenol’s RES-SCE-8MG is a MIL-STD rugged, managed-military-grade Ethernet switch, offering 8 Gigabit Ethernet 10/100/1000 Ports. The portable rugged Ethernet switch is intended for unmanned vehicles or man packable command post. Developed for SWaP (Size Weight and Power) and mobile portable military applications, the RES-SCE-8MG features mechanical packaging enhancements designed for MIL-STD-810F airborne and ground environmental compliance and high reliability. The unit has been especially hardened to improve ingress, impact, and shock/vibration protection, as well as eliminate all moving parts through passive cooling, and interface through sealed miniature circular connectors. Leveraging best-in-class switching technology, the RES-SCE-8MG serves as a robust solution for providing local area network (LAN) connectivity to IP-enabled computing and net-centric devices. Compact in size, the RES-SCE-8MG is particularly useful for expanding port density in space-constrained airborne and ground vehicle environments. Military applications n Unmanned Vehicles n Mobile communications n Battlefield communication C4ISR n Avionic & shipboard systems Key features n Ethernet ports n Managed 8 x switched 10/ 100/ 1000 ports n Networking n Spanning Tree (802.1d), RSTP (802.1w) and multiple Spanning Tree (802.1S) for fast recovery rings n Security via Radius Authentication 802.1x, Port Security, Port Mirroring n Multicasting (IGMP Snooping), GARP, GMRP, and GVRP A Broadcasting and flooding Control up to 8K Groups m n 802.1q Tagged based VLAN up to 4K VLAN groups p h n QoS Multi-Layer Classifier, 802.1p, ToS/DSCP traffic classifi- e cation. WFQ, Strict Queuing. n o n Bridge support for Q-in-Q l n Link Aggregation 802.3AD n WEB, CLI, Telnet Management n Connectors n Power connector type: SCE2-B-76A06-07SN n LAN connector type: SCE2-B-76A07-14SN-001 n LED indication per port (speed, link/activity) n Chassis SWaP n Low profile rugged aluminium extrusion n Conductively cooled w/ custom internal heat-sinks n Ingress protection against sand, dust and moisture n Epoxy-Polyamide Paint, Per MIL-C-83286, matt texture, color: Nato green n Standards n MIL-STD-1275, MIL-STD-704A, MIL-STD-461E, MIL-STD- 810F GM, IP67/68 n Performance n 26.8 Mpps wire speed forwarding rate n 20 Gbps maximum forwarding bandwidth n 8K MAC address n Activity status n Indicators for Power and LAN activity (light off by default) n STATUS pushbutton to turn on the indicators 60

Dimensional line drawing Product specifications All measurements are in millimeters Standards compliance • IEEE 802.1x MAC based Authentication • IEEE 802.1Q Vlan Tagging • IEEE 802.1P QoS • IEEE 802.1S Multiple STP • IEEE 802.1W Rapid STP • IEEE 802.3 AD Link Aggregation Power • Exceed MIL-STD-1275B Surge and Spike protection • Voltage Input: 24Vdc Nominal (16-36 VDC) • Power Consumption: 7.2W Max - 5W Typical • Chassis grounding Electromagnetic • MIL-STD-461E Electromagnetic compatibility • CE-102, CS-114, CS-115, CS-116, RE-102, RS-103 Environmental • MIL-STD-810F/G/GM • Random vibration (514.5I), Bench handling (516.6VI), High temp (501.5I, II), Low temp (502.5I), Humidity (507.5II), Air pressure (500.5I, II), Blowing rain (506.5I), Immersion (512.5I), Salt atmosphere (509.5I), Blowing dust (510.5I), Loose cargo vibration (514.6II), Wind analysis • IP67/68 • RTCA/DO-160F, Low temperature 2 hours @ -55°C, operating, chap 4, cat B2 • RTCA/DO-160F, Vibrations, section 8, cat. S, curve M • RTCA/DO-160F Shocks, cat. A, 6g, 11ms Physical • Dimensions: 100mm (L) x 89 (W) x 36 (H), including connectors & hardware. ol • Weight: 390g n e h Installation p • Set of Four 4-40 threads on bottom for mounting to m any flat surface A Cooling • No moving parts. Passive cooling. Operating temp • -35°C to +75°C (-31°F to +167°F) / -35° C Cold start-up Storage temp • -45°C to +85°C (-49°F to +185°F) Part number code Description RES-SCE-8MG MIL-STD Portable Managed Ethernet switch with 8 ports 10/100/1000TX RES-SCE-8MG-CBL-PWR-2M Power cordset for RES-SCE-8MG, 1 side with SCE2B-L1K-0607-PN Latch release, 1 side with 4mm plugs for power supply, cable 2m long RES-SCE-8MG-CBL-LAN-2M LAN cordset for RES-SCE-8MG, valid for LAN 1 to 8, 1 side with SCE2B-L1K-0714-PN Latch release, 1 side with RJ45 civilian, cable RJFSFTP5E cat 5E, 2m long For specific cable harnesses, please consult us. 61

RESMLAC-8US-CAPS Unmanaged military Ethernet switch, MIL-DTL-38999 connectors 8 fast ports Military ethernet switch for harsh environment - Fully MIL-STD compliant Amphenol’s RESMLAC-8US-CAPS is a MIL-STD rugged, unmanaged-military-grade Ethernet switch, offering 8 Fast Ethernet 10/100 Ports. Developed for military and harsh environment applications, the RESMLAC-8US-CAPS features mechanical packaging enhancements designed for MIL-STD-810F airborne and ground environmental compliance and high reliability. The unit has been especially hardened to improve ingress, impact, and shock/vibration protection, as well as eliminate all moving parts through passive cooling, and interface through sealed MIL-D-38999 circular connectors. Leveraging best-in-class switching technology, the RESMLAC-8US-CAPS serves as a robust solution for providing local area network (LAN) connectivity to IP-enabled computing and net-centric devices. Compact in size, the RESMLAC-8US-CAPS is particularly useful for expanding port density in space-constrained airborne and ground vehicle environments. Military applications n Data acquisition & transmission n Battlefield communication C4ISR n Rugged Networks n Mobile communications n Combat vehicles n Avionic & shipboard systems A m p Key features henol nn EnNnnte h 8 F Stuet wxorl lonrs ewwre-ktiairi tpennc-dgohs-erpftdoes re1wd0a /f1rod0r w0m a(eFrcadhsinta gEn tirshameternet) ports MilitMaIrMMMLy-IIILLSL r---TSSSIDuPTTT-g6DDD87g1---7410e062Fd417/ GAE5sMwitch nn A Auuttoo -MneDgIo-ItI,i aMtiDoIn-X protocol SSTTAANNAAGG 42387905 n Address look-up n Connectors n MIL-D-38999 (Power & Ethernet signals) n Power connector type: D38999/24WA98PA n LAN connector type: D38999/24WA35SN n Chassis n Low profile rugged aluminium extrusion n Conductively cooled w/ custom internal heat-sinks n Ingress protection against sand, dust and moisture n Epoxy-Polyamide Paint, Per MIL-C-83286, matt texture, color: Nato green n Standards n MIL-STD-1275, MIL-STD-704A, MIL-STD-461E, MIL-STD-810F GM, IP67/68 n Voltage operation n 24VDC (18VDC – 32VDC) 62

Product specifications Dimensional line drawing All measurements are in millimeters Performance • 128K byte of SRAM for frame buffering • 2.0 Gbps high-performance memory bandwidth • 2 LED indication (speed, link/activity) per port 8.7 • Wire-speed reception and transmission 5 • Integrated address look-up engine • Automatic address learning 269.0 Standards compliance • IEEE 802.3 10 Mbps 10BASE-T (Ethernet) GND SCREW • IEEE 802.3u 100BASE-TX 100 Mbps (Fast #8-32, Ethernet) 67.5 Height 8.7mm NAME PLATE LAMP • IEEE 802.3x flow control 5.2 (x4) 29.5 210.0 Power • MIL-STD-1275B & MIL-STD 704A surge and 0 spike protection 5. • Voltage input: 24Vdc nominal (18-32V) 44.2 POWER • Power consumption: 2.8W typical Elec•t romCahgansseitsi cgrounding 32.96.3 35.5 0 (x2) 19 3. • MIL-STD-461E electromagnetic compatibility 2 1 • CE-102, CS-114, CS-115, CS-116, RE-102, RS- 103 Environmental • MIL-STD-810F, 501.4I, 501.4II, 502.4I, 502.4II, 507.4, 500.4II, 514, 516I, 516Vi, 514.5, 512.4 29.4 30.0 • IP67/68 30.0x7=210.0 • STANAG 4370, vibrations AECTP 400, method 401; cannon fire shocks, 6666 shocks up to 8.6g, half sine shape • STANAG 2895, altitude 10.000m, temperature -21°C / 71°C Physical • Dimensions: 269mm(L) x 133(W) x 65(H), including connectors & hardware • Weight: 1.5 kg ol n Installation e • Set of four 4x4.5 mounting holes on bottom h for mounting to any flat surface. p m Cooling A • No moving parts. Passive cooling. Operating temp • -35°C to +75°C (-31°F to +167°F) / -35°C Cold start-up Storage temp • -45°C to +85°C (-49°F to +185°F) Part number code Description RESMLAC-8US-CAPS MIL-STD Rugged Unmanaged Ethernet switch with 8 ports 10/100TX, color dark green RESMLAC-8US-CAPS-SX MIL-STD Rugged Unmanaged Ethernet switch with 8 ports 10/100TX, color black RESMLAC-8US-CBL-PWR-2M Power cordset for RESMLAC-8US-CAPS, 1 side with MIL-DTL-38999 plug, 1 side with 4mm plugs for power supply, cable 2m long RESMLAC-8US-CBL-LAN-2M LAN cordset for RESMLAC-8US-CAPS, valid for LAN 1 to 8, 1 side with MIL-DTL-38999 plug, 1 side with RJ45 civilian, cable RJFSFTP5E cat 5E, 2m long For specific cable harnesses, please consult us. 63

RJSMLAC-8UG-CAPS Unmanaged military Ethernet switch, MIL-DTL-38999 connectors 8 Gigabit ports Military ethernet switch for harsh environment - Fully MIL-STD compliant Amphenol’s RESMLAC-8UG-CAPS is a MIL-STD rugged, unmanaged-military-grade Ethernet switch, offering 8 triple speed Ethernet (10/100 /1000) ports. Ethernet connectors are RJFTV, using RJField patented system that allows easy and quick assembly of any standard RJ45 cordset without any tool. Developed for military and harsh environment applications, the RJSMLAC features mechanical packaging enhancements designed for MIL-STD-810F airborne and ground environmental compliance and high reliability. The unit has been especially hardened to improve ingress, impact, and shock/vibration protection, as well as eliminate all moving parts through passive cooling. Leveraging best-in-class switching technology, the RJSMLAC serves as a robust solution for providing local area network (LAN) connectivity to IP-enabled computing and net-centric devices. Compact in size, the RJSMLAC is particularly useful for expanding port density in space-constrained airborne and ground vehicle environments. Military applications n Data acquisition & transmission n Battlefield communication C4ISR n Rugged Networks n Mobile communications n Combat vehicles n Avionic & shipboard systems Key features A n Ethernet ports m n 8 x switched 10/100/1000 (Gigabit Ethernet) ports on RJFTV p connectors h e n Networking n o n Full wire-speed forwarding rate l n Store-and-forward mechanism n Auto MDI-II, MDI-X n Auto-negotiation protocol n Address look-up n Connectors n Power connector type: MIL-DTL-38999/24WA98PA n LAN connector type: RJFTV (coupling mechanism from MIL- DTL-38999) n LED indication per port (speed, link/activity) n Chassis n Low profile rugged aluminium extrusion n Conductively cooled w/ custom internal heat-sinks n Ingress protection against sand, dust and moisture n Finish of epoxy-polyamide paint per MIL-C-83286, matt texture, color: Nato green n Standards n MIL-STD-1275, MIL-STD-704A, MIL-STD-461E, MIL-STD-810F GM, IP67/68 n Voltage operation n 24VDC (18VDC – 32VDC) 64

Product specifications Dimensional line drawing All measurements are in millimeters Performance • 128K byte of SRAM for frame buffering • 2.0 Gbps high-performance memory bandwidth • 2 LED indication (speed, link/activity) per port • Wire-speed reception and transmission • Integrated address look-up engine • Automatic address learning Standards compliance • IEEE 802.3 10BASE-T (Ethernet) 157.5 • IEEE 802.3u 100BASE-T (Fast Ethernet) • IEEE 802.3ab 1000BASE-T (Gigabit Ethernet) • IEEE 802.3x flow control Power • MIL-STD-1275B & MIL-STD 704A surge and spike protection • Voltage input: 24Vdc nominal (18-32V) • Power consumption: 7W typical • Chassis grounding Electromagnetic • MIL-STD-461E electromagnetic compatibility • CE-102, CS-114, CS-115, CS-116, RE-102, RS- 103 Environmental • MIL-STD-810F, 501.4I, 501.4II, 502.4I, 502.4II, 507.4, 500.4II, 514, 516I, 516Vi, 514.5, 512.4 • IP67/68 Physical • Dimensions: 269mm(L) x 133(W) x 65(H), including connectors & hardware l • Weight: 1.8kg o n e Installation h • Set of four 4x4.5 mounting holes on bottom p for mounting to any flat surface. m A Cooling • No moving parts. Passive cooling. Operating temp • -35°C to +75°C (-31°F to +167°F) / -35°C Cold start-up Storage temp • -45°C to +85°C (-49°F to +185°F) Part number code Description RJSMLAC-8UG-CAPS MIL-STD Rugged Unmanaged Ethernet switch with 8 ports 10/100/1000TX, powered with 18-32VDC RJSMLAC-8UG-CAPS-VAC MIL-STD Rugged Unmanaged Ethernet switch with 8 ports 10/100/1000TX, powered with 90-265 VAC / 47-65 Hz RJSMLAC-8UG-CBL-PWR-2M Power cordset for RJSMLAC-8UG-CAPS, 1 side with MIL-DTL-38999 plug, 1 side with 4mm plugs for power supply, cable 2m long RJSMLAC-8UG-CBL-LAN-2M LAN cordset for RJSMLAC-8UG-CAPS, valid for LAN 1 to 8, 1 side with RJFTV6MG plug, 1 side with RJ45 civilian, cable RJFSFTP5E cat 5E, 2m long For specific cable harnesses, please consult us. 65

RJSMLAC-8MG-CAPS Managed military Ethernet switch, RJFTV connectors - 8 Gigabit ports Military ethernet switch for harsh environment - Fully MIL-STD compliant Amphenol’s RJSMLAC-8MG-CAPS is a MIL-STD Fully managed Military-grade network switch offering 8 triple speed (10/100/1000) ports. Ethernet connectors are RJFTV, using RJField patented system that allows easy and quick assembly of any standard RJ45 cordset without any tool. Developed for military and harsh environment applications, the RJSMLAC-8MG-CAPS features mechanical packaging enhancements designed for MIL-STD-810F airborne and ground environmental compliance and high reliability. The unit has been especially hardened to improve ingress, impact, and shock/vibration protection, as well as eliminate all moving parts through passive cooling, and interface through sealed MIL-DTL-38999 circular connectors. Leveraging best-in-class switching technology, the RJSMLAC-8MG-CAPS serves as a robust solution for providing local area network (LAN) connectivity to IP-enabled computing and net-centric devices. Compact in size, the RJSMLAC-8MG-CAPS is particularly useful for expanding port density in space-constrained airborne and ground vehicle environments. Military applications n Data acquisition & transmission n Battlefield communication C4ISR n Industrial Rugged Networks n Mobile communications n Combat vehicles n Avionic & shipboard systems Key features A n Ethernet ports m n Managed 8 x switched 10/100/1000 ports on RJFTV connectors p n Networking h e n Spanning tree (802.1d), RSTP (802.1w) and multiple n n Spanning tree (802.1S) for fast recovery rings o l nnfnnSnlto roicdSM8QtB ie0rQnouic2dgSulu.tg 1ecimrcequiota u iynstsnlu atttvgrigpinio-.aglpgla eRou y(dareIpGt dr b tfMicooaulsr Pas8 e sQ AKSds-n ui gfiVnioterhL-oorQAe,pu n8N.ipnt0 siug2c.pa.)1,t tpGioo,A n T4Ro K8PS 0,V/ G2DL.MA1SxCNR,P P pg , toraroarntufd fspi ceGs c.cVulRarsPit,sy iB,f irpcoaoatrdito cmna.si WrtrinoFgrQi na, gnd MilitMaIrMMMLy-IIILLSL r---TSSSIDuPTTT-g6DDD88g1---7410e062Fd417/ GAE5sMwitch n Cnno nnLWeicnEtkBo ,ar CsgLgIr, eTgelanteiotn m 8a0n2a.3gAeDm.ent. MMIMLIL-IS-LFT--SD1-8-918067170D--1E A n Power connector type: MIL-DTL-38999/24WA98PA n LAN connector type: RJFTV (coupling mechanism from MIL-DTL-38999) n Management connector type: SCE2B 76 A 06 07 SN 001 n LED indication per port (Speed, Link/Activity) n Chassis n Low profile rugged aluminium extrusion n Conductively cooled w/custom internal heat-sinks n Ingress protection against sand, dust and moisture n Epoxy-Polyamide Paint, Per MIL-C-83286, matt texture, color: Nato green n Standards n MIL-STD-1275, MIL-STD-704A, MIL-STD-461E, n MIL-STD-810F GM, IP67/68 66

Amphenol PRODUCT SPECIFICATIONS Dimensional line drawing Product specifications VOLTAGE OPERATION: DimeAnlls mioeansaurle Lmienntes aDrer ainw miilnlimgeters • 24VDCVo (l1ta8gVeD oCp e~r a3ti2oVnDC) • Standard model: 24VDC (18VDC ~ 32VDC) PERFORMANCE: • VAC model : 90-265 VAC / 47-65 Hz powered • 26.8 Mpps wire speed forwarding rate Performance • 20 Gbps maximum forwarding bandwidth • 26.8 Mpps wire speed forwarding rate • 8K MAC Ad•d res2s0 Gbps maximum forwarding bandwidth • 8K MAC address STANDARDS COMPLIANCE: • IEEE 80S2t.a1nxd MarAdsC c boamspelida nAcuethentication • IEEE 802.1•Q VlIaEnEE T 8a0g2g.1ixn Mg AC based authentication • IEEE 802.1Q Vlan tagging • IEEE 802.1P QoS • IEEE 802.1P QoS • IEEE 802.1•S MuIElEtEip 8l0e2 S.1TSP M ultiple STP • IEEE 802.1•W RIaEEpEid 8 0S2T.1PW Rapid STP • IEEE 802.1•A D LIEinEEk 8 A02g.g3AreDg Laintiko ang gregation • IEEE 80P2o.1wXe r • Exceed MIL-STD-1275B surge and spike POWER: protection • Exceed MIL• -STDP-o1w2e7r c5oBn sSuumrpgteio na:n 7dW S typpikiceal protection • Voltage Inp•u t: 2C4haVsdsics gNrooumnidninagl (18-32V) • Power Consumption: 7W Typical Electromagnetic • Chassis gro• undMinILg- STD-461E electromagnetic compatibility ELECTROMAGNETIC: • CE-102, CS-114, CS-115, CS-116, RE-102, • MIL-STD-461E ERlSe-1c0t3romagnetic compatibility • RE-02, RS-03 Environmental : shock/vibration/humidity SHOCK/VIBRATION• /HUMMIL-ISDTIDT-Y8:1 0F, 501.4I, 501.4II, 502.4I, 502.4II, • MIL-STD-810F; 55007.14,. 450I,0 5.40II,1 5.144I,I 5, 1560I, 251.46VI,I ,5 50142.5.4, 5II1,2 5.407.4, • IP67/68 500.4II, 514, 516I, 516VI, 514.5, 512.4 • MIL-F-18870-E, Temperature shock test 72 • IP68 hours @ -55°C, Storage • MIL-STD-167-1A Low frequencies Vibrations PHYSICAL: • MIL-S-901D Lightweight shocks • Dimensions: 287mm (L) x 158(W) x 54(H), including connectPohryss &ica hlardware • Dimensions: 287mm(L) x 147(W) x 50(H), • Weight: 1.5kg including connectors & hardware ol n INSTALLATION: • Weight: 1.8 kg e • Set of FIonustra 4ll.a5ti omnounting holes on bottom for mounting ph to any flat s• urfaSceet o. f four 4.5 mounting holes on bottom m • Carrying handlefosr mounting to any flat surface. A • Carrying handles COOLING: Cooling • No Moving Parts. Passive Cooling • No moving parts. Passive cooling. OPERATING TEMP: Operating temp • -35ºC to +75ºC (-31ºF to +167ºF) – Cold Start-Up • -35°C to +75°C (-31°F to +167°F) / -35°C Cold STORAGE TEMP: start-up Storage temp *All measurements are in millimeters • -45ºC to +8• 5ºC- (4-54°9C ºtFo +to85 +°C1 (8-459º°FF )t o +185°F) ORDERING INFORMATION PART NUMBER DESCRIPTION Part number code Description RJSMLAC 8MRGJS MCLAACP-8MSG -CAPSM I L - S TD Rugged MLI2L-S/T3D R Muggaedn Maagnaegded EEthtehrneert snweitcth Swiwth i8t pcohrts, 180/ 1x0 01/1000/0T1X,0 po0w/er1ed0 w0ith0 1T8-X32 VwDCi th RJFTV, with caps and handles RJSMLAC-8MG-CAPS-VAC MIL-STD Rugged Managed Ethernet switch with 8 ports 10/100/1000TX, powered with 90-265 VAC / 47-65 Hz RJSMLAC-8MG-CBL-PWR-2M Power cordset for RJSMLAC-8MG-CAPS, 1 side with MIL-DTL-38999 plug, 1 side with 4mm plugs for power supply, cable 2m long AmphenolR JSSMLoACc-8MaGp-CBeL-xLANP-2rMomenade de l’LAArNv ceor d-sBet .fPor .R2JS9M L-A C7-84M3G1-C1A PTS, H1 sYidEe wZit h– R JFFTRV6AMNG pClugE, 1 side with RJ45 civilian, cable RJFSFTP5AE catm 5E, 2mp lonhg enol ® Phone. :+ 33 (R0JS)M 4LA 5C-08M 8G-9CB 2L-8MN 0G0-2M - Fax : + 33 (0M)a 4na g5em0e 9nt6 co 2rd9se t7 fo5r R –JS MELA-mC-8aMiGl:- CcAoPSn, 1t asidcet @withr jSsCwE2BitLc1Kh0.6c0o7PmN plug, 1 side with DB-9 civilian, cable 2m long http://www.rjswitch.com For specific cable harnesses, please consult us. 67

RESMLAC-8MG-CAPS Managed military Ethernet switch, MIL-DTL-38999 connectors 8 Gigabit ports Military ethernet switch for harsh environment - Fully MIL-STD-compliant Amphenol’s RESMLAC-8MG-CAPS is a MIL-STD fully managed Military-grade network switch offering 8 triple speed (10/100/1000) ports. Developed for military and harsh environment applications, the RESMLAC-8MG-CAPS features mechanical packaging enhancements designed for MIL-STD-810F airborne and ground environmental compliance and high reliability. The unit has been especially hardened to improve ingress, impact, and shock/vibration protection, as well as eliminate all moving parts through passive cooling, and interface through sealed MIL-DTL-38999 circular connectors. Leveraging best-in-class switching technology from Amphenol, the RESMLAC-8MG-CAPS serves as a robust solution for providing local area network (LAN) connectivity to IP-enabled computing and net-centric devices. Compact in size, the RESMLAC-8MG-CAPS is particularly useful for expanding port density in space-constrained airborne and ground vehicle environments. Military applications n Data acquisition & transmission n Battlefield communication C4ISR n Rugged Networks n Mobile communications n Combat vehicles n Avionic & shipboard systems Key features n Ethernet ports n Managed 8 x switched 10/100/1000 ports A m n Networking p n Spanning tree (802.1d), RSTP (802.1w) and multiple h e n Spanning tree (802.1S) for fast recovery rings n n Security via Radius authentication 802.1x, port security, port mirroring o l n Multicasting (IGMP Snooping), GARP, GMRP, and GVRP, Broadcasting and flooding control up to 8K groups. n 802.1q tagged based VLAN up to 4K VLAN groups. n QoS multi-layer classifier, 802.1p, ToS/DSCP traffic classification. WFQ, Strict Queuing. n Bridge support for Q-in-Q. n Link aggregation 802.3AD. n WEB, CLI, Telnet management. n Connectors n Power connector type: MIL-DTL-38999/24WA98PA n LAN connector type: MIL-D-38999/24WB35SN n LED indication per port (Speed, Link/Activity) n Chassis n Low profile rugged aluminium extrusion n Conductively cooled w/custom internal heat-sinks n Ingress protection against sand, dust and moisture n Epoxy-Polyamide Paint, Per MIL-C-83286, semi-gloss n Standards n MIL-STD-1275, MIL-STD-704A, MIL-STD-461E, n MIL-STD-810F GM, IP67/68 n Voltage operation n 24VDC (18VDC ~ 32VDC) 68

Dimensional line drawing Product specifications All measurements are in millimeters Performance • 26.8 Mpps wire speed forwarding rate • 20 Gbps maximum forwarding bandwidth • 8K MAC address Standards compliance • IEEE 802.1x MAC based authentication • IEEE 802.1Q Vlan Tagging • IEEE 802.1P QoS 269.0 • IEEE 802.1S Multiple STP • IEEE 802.1W Rapid STP • IEEE 802.3AD Link aggregation Power • Exceed MIL-STD-1275B surge and spike 210.0 protection . 5.2H9 #8-32X0.375* • Voltage input: 24Vdc nominal (18-32V) (x4) NAME PLATE GROUNDING SCREW 35.0 • Power consumption : 7W typical • Chassis grounding Electromagnetic • MIL-STD-461E electromagnetic 2.93.0 • cCoEm-1p0a2t, iCbSil-it1y14, CS-115, CS-116, RE-102, 1312 80.792.3 RS-103 32.349.3 Environmental : shock/vibration/humidity 5.0 29.5 • MIL-STD-810F, 501.4I, 501.4II, 502.4I, 502.4II, 31.0 43.0 43.0 507.4, 500.4II, 514, 516I, 516VI, 514.5, 512.4 70.0 129.0 • IP67/68 238.0 Physical • Dimensions: 269mm(L) x 133(W) x 79(H), including connectors & hardware • Weight: 1.5 kg l o n Installation e h • Set of four 4.5 mounting holes on bottom p for mounting to any flat surface. m 8 • Carrying handles 79.0.8 A 6 Cooling • No moving parts. Passive cooling. Operating temp • -35°C to +75°C (-31°F to +167°F) / -35°C Cold start-up Storage temp • -45°C to +85°C (-49°F to +185°F) Part number code Description RESMLAC-8MG-CAPS MIL-STD Rugged Managed Ethernet switch with 8 ports 10/100/1000TX, powered with 18-32VDC RESMLAC-8MG-CBL-PWR-2M Power cordset for RESMLAC-8MG-CAPS, 1 side with MIL-DTL-38999 plug, 1 side with 4mm plugs for power supply, cable 2m long RESMLAC-8MG-CBL-LAN-2M LAN cordset for RESMLAC-8MG-CAPS, 1 side with MIL-DTL-38999 plug, 1 side with RJ45 civilian, cable RJFSFTP5E cat 5E, 2m long RESMLAC-8MG-CBL-MNG-2M Management cordset for RESMLAC-8MG-CAPS, 1 side with MIL-DTL-38999 plug, 1 side with DB-9 civilian, cable 2m long For specific cable harnesses, please consult us. 69

RESMLAC-8MG-CAPS-F35 Managed military Ethernet switch, MIL-DTL-38999 connectors 8 Gigabit ports Military ethernet switch for harsh environment - Fully MIL-STD-compliant Amphenol’s RESMLAC 8MG CAPS F35 is a MIL-STD fully managed Military-grade network switch offering 8 triple speed (10/100/1000) ports. Developed for military and harsh avionic applications, the RESMLAC 8MG CAPS F35 features mechanical packaging enhancements designed for MIL-STD-810F airborne and ground environmental compliance and high reliability. The unit has been especially hardened to improve ingress, impact, and shock/vibration protection, as well as eliminate all moving parts through passive cooling, and interface through sealed MIL-DTL-38999 circular connectors. Leveraging best-in-class switching technology from Amphenol, the RESMLAC 8MG CAPS F35 serves as a robust COTS solution for providing local area network (LAN) connectivity to IP-enabled computing and net-centric devices. Compact in size, the RESMLAC 8MG CAPS F35 is particularly useful for expanding port density to tactical IP routers in space-constrained airborne and ground vehicle environments. Military applications n Data acquisition & transmission n Battlefield communication C4ISR n Rugged Networks n Mobile communications n Combat vehicles n Avionic & shipboard systems Key features n Ethernet ports n Managed 8 x switched 10/100/1000 ports A m n Networking p n Spanning tree (802.1d), RSTP (802.1w) and multiple h e n Spanning tree (802.1S) for fast recovery rings n n Security via Radius authentication 802.1x, port security, port mirroring o l n Multicasting (IGMP Snooping), GARP, GMRP, and GVRP, Broadcasting and flooding control up to 8K groups. n 802.1q tagged based VLAN up to 4K VLAN groups. n QoS multi-layer classifier, 802.1p, ToS/DSCP traffic classification. WFQ, Strict Queuing. n Bridge support for Q-in-Q. n Link aggregation 802.3AD. n WEB, CLI, Telnet management. n Connectors n Power connector type: MIL-DTL-38999/24WB35PN n LAN connector type: MIL-D-38999/24WF35PN n LED indication per port (Speed, Link/Activity) n Chassis n Low profile rugged aluminium extrusion n Conductively cooled w/custom internal heat-sinks n Ingress protection against sand, dust and moisture n Epoxy-Polyamide Paint, Per MIL-C-83286, semi-gloss n Standards n MIL-STD-1275B, MIL-STD-704A, MIL-STD-461A, n MIL-STD-810F GM, IP67/68 n Voltage operation n Nominal 24VDC 70

Dimensional line drawing Product specifications All measurements are in millimeters Performance • 26.8 Mpps wire speed forwarding rate • 20 Gbps maximum forwarding bandwidth • 8K MAC address Standards compliance • IEEE 802.1x MAC based authentication • IEEE 802.1Q Vlan Tagging • IEEE 802.1P QoS • IEEE 802.1S Multiple STP • IEEE 802.1W Rapid STP • IEEE 802.3AD Link aggregation Power • Exceed MIL-STD-1275B surge and spike protection • Voltage input: 24Vdc nominal (18-32V) • Power consumption : 7W typical • Chassis grounding Electromagnetic • Exceed MIL-STD-461A electromagnetic compatibility • RE-02, RS-03 Environmental : shock/vibration/humidity • MIL-STD-810F, 501.4I, 501.4II, 502.4I, 502.4II, 507.4, 500.4II, 514, 516I, 516VI, 514.5, 512.4 Physical • Dimensions: 209.6mm(L) x 136(W) x 44.4(H), including connectors • Weight: 1.1 kg Installation ol • Set of four #10-32 captive screws for n e mounting to any flat surface h p Cooling m • No moving parts. Passive cooling. A Operating temp • -35°C to +75°C (-31°F to +167°F) / -35°C Cold start-up Storage temp • -45°C to +85°C (-49°F to +185°F) Part number code Description RESMLAC-8MG-CAPS-F35 MIL-STD Rugged Managed Ethernet switch with 8 ports 10/100/1000TX, powered with 18-32VDC RESMLAC-F35-CBL-PWR-2M Power cordset for RESMLAC-8MG-CAPS-F35, 1 side with MIL-DTL-38999 plug, 1 side with 4mm plugs for power supply, cable 2m long For specific cable harnesses, please consult us. 71

RESMLAC-28MG Managed military Ethernet switch - 24 Gigabit + 4 combo 10G ports Military ethernet switch for harsh environment - Fully MIL-STD compliant The RESMLAC-28MG is a MIL-STD Fully managed Military-grade network switch offering 24 triple speed (10/100/1000) ports + 4 x 10G fiber ports. The RESMLAC-28MG is compatible with all the newest military industry network protocols for redundant link topology, security, multi- cast and management requirements. Developed specifically for military and harsh mobile applications, the RESMLAC-28MG features mechanical packaging enhancements designed for MIL-STD-810F airborne and ground environmental compliance and high reliability. The unit has been especially hardened to improve ingress, impact, and shock/vibration protection, as well as eliminate all moving parts through passive cooling, and interface through sealed MIL-D-38999 circular connectors and SCE. Leveraging best-in-class switching technology, the RESMLAC-28MG serves as a robust COTS solution for providing local area network (LAN) connectivity to IP-enabled computing and net-centric devices. Compact in size, the RESMLAC-28MG is particularly useful for expanding port density to tactical IP routers in space-constrained airborne and ground vehicle environments. Military applications n Data acquisition & transmission n Battlefield communication C4ISR n Rugged Networks n Mobile communications n Combat vehicles n Avionic & shipboard systems A Features m n Ethernet ports p h n Managed 24 x switched 10/100/1000 ports (including 4 Combo e n ports) + 4x10Gbps Fiber ports - Total of 28 ports. o n The 4 Combo ports provide alternative 4 ports 100/1000Base-FX l ports n Networking General n Wire-speed hardware-based 28 ports gigabit ethernet switch n Multicasting (IGMP Snooping), GARP, GMRP, MLD and GVRP n Multicast groups up to 8K for both IPv4 and IPv6 n Broadcasting and flooding control up to 8K groups n 802.1q tagged based VLAN up to 4K VLAN groups n Link Aggregation 802.3ad, up to 16 members in group n Link Aggregation mechanism based on L2/ L3/ L4 parameters n Jumbo Frame support up to 10K n WEB, CLI, Telnet Management Quality of service n QoS Multi-Layer Classifier: 802.1p, EtherType, VLAN-ID, IPv4/ 6 DSCP/ ToS, and UDP/TCP ports & ranges traffic classification n Per port WFQ and Strict Queuing scheduling n DSCP remarking for both IPv4 and IPv6 frames n Ingress policer and ingress shaper per port with 500Kbps granularity n Egress shaper per port with 500Kbps granularity n Full-duplex flow control (IEEE802.3X) and half-duplex backpressure, symmetric and asymmetric. 72

Dimensional line drawing ... All measurements are in millimeters Security n Security via Radius authentication 802.1x, Port/ MAC access control n Port security n Per port ingress and egress port mirroring n Mirroring per VLAN and per content awareness match n Private VLAN support per VLAN (Isolated and Promiscuous ports) n Content Aware Policers: • 128 Content Aware Policers • 16 Content Aware rate policers with rates ncRntntiiapme sdltee uSS •••••••••a RS< ntpnpPo5dadRar0an mn umnfnf8AmCANCCmSpESPMoonnr cxpuio foooosdcoRonUriuiai yt nrolectC nnnrPmv hgieutlDv/ rtac,gctncaoatttd ean peieI seeeirPth ntpnnP1arsetsaitr rrnnnd/l ttrcllefdtivsonnlpT evreopttteaew se4i lye gCcae e crnnlusAAdA ,3,eao ite (P tActpnC Iww(pt8t0CriruAP s8 eoeoseAwpgp0Po LaavnC0u ra n 2wfofU o3lsbnrra6t2poninuL ee .cre2rro sap1a. rdrniDtpte 1etr t snPPord e mhfs cs ,frSreoeA lPoo otr)o atcroa) pd, eSioiollRP rnpotlonoiifR cel occlouoPpIiguoinydStoPreecclrgrein r sTie n erroromectffh sstiPd rrpba levnn,f f sas i fo shepoyrsxg(b ogts8anr na ls Crromi wc0rrocoto eogfdti2eop aoieicenetwo.rdp1nntohsnntniawc tvem taerssarerne)n, reias a ritecUa dtcyl rbo s,An eD uM armmvtwd siPpsoenAa uiea/mer CE DOCUMENT EST LA PROPRIETE D’AMPHENOL SOCAPEX, IL NE PEUT NI ETRE REPRODUIT, NI COMMUNIQUE A DES TIERS SANS AUTORISATION ECRITECE DOCUMENT EST LA PROPRIETE D’AMPHENOL SOCAPEX, IL NE PEUT NI ETRE REPRODUIT, NI COMMUNIQUE A DES TIERS SANS AUTORISATION ECRITECE DOCUMENT EST LA PROPRIETE D’AMPHENOL SOCAPEX, IL NE PEUT NI ETRE REPRODUIT, NI COMMUNIQUE A DES TIERS SANS AUTORISATION ECRITErggTCdylrrrIMP 006-01IMP 006-01IMP 006-01tseoeCu- , i - rPl- BBBOOONNN PPPDDDOOOiiiUUUmmmRRR eeeAAACCCnnnCCCsssOOOiiioooRRRDDDnnn sssFFFAAA dddBBBNNN+++RRRuuu oooPPPIIImmm CCCrrrsssooo AAAdddgggwwwTTTuuurrraaaIII iiiOOOcccmmmtttlllccciiiNNNmmmeeehhh nnn:::eeettt ::::::CCCOOOTTTSSS dddooonnnnnnéééeeesss ààà tttiiitttDDDrrreeeAAA TTTiiiEEEnnn ddd:::iiicccaaatttiiifff 222DDD ::: 111999NP111LAAMTSSSEEwwwLLLRRReeeiiiDDDttt... EEEccc 222DDDSSS111hhhSSSAAA///IIINNN000 LLLEEE444RRR PPPBBB///AAA222JJJOOORRR000 SSS:::111NNN111AmphenolMMMLLLAAACCC---222888LLLeeeLLLMMM TTT...222 EEEPPP111CCCGGGOOOHHH///000NNNUUU444IIIQQQ///JJJUUU222OOOEEE000 :::LLL111111 IIINNNRRRDDDEEEIIIMMMCCCPPPEEELLL :::AAACCCEEE AAALLLEEE111 BBB:::mmmAAA999...PPP111...pppMMM222---III999SSShhhwwwPPPEEE 777 wwwAAAeeeLLL444 wwwJJJ333OOOCCCnnn...UUU111rrrRRRjjj111ooo---sss ::: 333wwwTTTllliiiHHH999 tttcccSSSYYY333hhhEEE...ooo---cccZZZ000oooccc mmmCCC000aaaEEEDDDpppIIINNNEEEDDDeeeXXXIIICCCEEExxx ::: 111///111 n RPR for up to 30 units per ring with recovery time <50ms hardware n 20-Gbps bandwidth for ring topology n QoS consistency across stack / ring n Mirroring across stack / ring n Link aggregation groups spanning multiple switches in stack/ring n Connectors n 2 x Power connector type: MIL-DTL-38999/24WC4P (1 optional) n 24 x LAN connector type: SCE2-B-76A07- 14SN-001 (4 ports are Gigabit Combo ports - 10/100/1000 or 1000FX fiber) n Optional fiber optic connectors: TVOP (MIL- D-38999), or CTOS (STANAG 4290), or TACBEAM (M83526/20&21) n 1 x Serial interface, shared with LAN port #1 n LED indication per Port (Speed, Link/Activity) per Unit (Power A, Power B) 73

n Chassis n Low profile rugged aluminium extrusion n Conductively cooled w/custom internal heat-sinks n Ingress protection against sand, dust and moisture n Epoxy-Polyamide Paint, Per MIL-C-83286, semi-gloss n Standards n MIL-STD-1275B, MIL-STD-704A, MIL-STD-461E, MIL-STD-810F GM, IP67 n Support up to 50ms holdup time, and 6VDC drops n Performance n 96.8 Mbps wire speed forwarding rate n 56 Gbps maximum forwarding bandwidth n 8K MAC address n Power n Exceed MIL-STD-1275B and MIL-STD-704A Surge and Spike protection with 50ms holdup time and 6VDC drops n Voltage input: - VDC versions: 24VDC nominal (18-32VDC) - VAC versions: 90-265 VAC / 47-65 Hz n Power consumption: 20W typical n Chassis grounding n Electromagnetic n MIL-STD-461E Electromagnetic compatibility n CE-102, CS-114, CS-115, CS-116, RE-102, RS-103 n Shock / Vibration / Humidity n MIL-STD-810F, 501.4I, 501.4II, 502.4I, 502.4II, 507.4, 500.4II, 514, 516I, 516VI, 514.5, 512.4 n Physical n Dimensions: 440mm (L) x 200mm (W) x 88(H), including connectors & hardware, 2U, 19” rack n Weight: 5.6 kg n Installation n Set of four 4.5mm mounting holes on bottom for mounting to any flat surface n 19” standard mounting ears A n Cooling m n No moving parts. Passive cooling. p n Operating temp h n -35°C to +75°C (-31°F to +167°F) / -35°C cold start-up e n n Storage temp o n -45°C to +85°C (-49°F to +185°F) l Part number code RESMLAC-28MG - M TVOP 10G DC Fiber optic ports (empty) No fiber optic ports 2 2 fiber optic ports 4 4 fiber optic ports Type of fiber optic M Multimode fiber optic, 2 ways, 50/125µm S Singlemode fiber optic, 2 ways, 9/125µm WDM WDM Singlemode fiber optic, 1 single way (10G only) , 9/125µm Fiber optic connectors TVOP TVOP connector with butt joint, MIL-D-38999 CTOS CTOS connector with expanded beam, for intensive use in harsh environments, STANAG 4290 TACB TACBEAM connector with expanded beam, M83526/20&21 Datarate for fiber optic ports G 1000 Mbps 10G 10G Voltage input DC Unit powered with 18-36VDC VAC Unit powered with 90-265 VAC / 47-65 Hz Part number code Description RESMLAC-28MG-CBL-PWR-2M Power cordset for RESMLAC-28MG, 1 side with MIL-DTL-38999 plug, 1 side with 4mm plugs for power supply, cable 2m long RESMLAC-28MG-CBL-MNG-2M Management Cordset for RESMLAC-28MG, SCE2B-L1K-0714PN on one side, DB-9 female plug on the other side, length 2m RESMLAC-28MG-CBL-LAN-2M LAN Cordset for RESMLAC-28MG, 1 termination with SCE2B-L1K-0714PN, 1 termination with RJ45, RJFSFTP5E cat 5E cable 2m For specific cable harnesses, please consult us. 74

RJSML-8US1 & RJSML-8UG1 Unmanaged military Ethernet switch - Fast or Gigabit Military ethernet switch for harsh environment with industrial EMI compliancy Sealed, rugged & unmanaged switch Amphenol offers an unmanaged Ethernet switch with 8 gigabit ports RJSML-8UG1. The switch can withstand a variety of extreme conditions. Whatever the situation - high temperatures, extreme shocks & vibrations, dust particles or even liquid immersion- there is a solution available. The switch electronics are sealed within a waterproof IP68 metallic enclosure. The conductive cadmium plating is suitable for most demanding EMI-RFI environments. Black paint is also offered when RoHS is required (other colors available). The I/O interface includes redundant power inputs as well as waterproof rugged RJ45 connectors from the RJFTV FIELD threaded product series based on MIL-DTL-38999 (Series III) metallic shell size 19. This serie enables the transformation without tooling of any standard RJ45 cordset into a robust and waterproof connection system. Military applications n Battlefield communication C4ISR n Rugged Networks n Mobile communications n Avionic & shipboard systems Key features ol n n Rugged environmental feature e n Rugged metal packaging with cadmium or paint protection h n Mil-DTL-38999 III connectors for both power and Ethernet p m ports A n IP65/IP68 rated when mated n Power filtering and protection (-704 option) • MIL- STD-461E (CE03) 600V spike suppressior • MIL- STD-704A • MIL- STD-1275A • RT CA/DO- 160B n MIL-STD-810F shocks n RTCA/DO- 160C Vibrations n Full-Duplex operation with flow control (no collisions!) n MIL STD 810F altitude 50,000 ft (15,000 m) n Auto-detecting, auto-crossover and auto-polarity n Broadcast storm protection n Models 8US1 n 8 ports 10/100-BaseT(X) n Wide operating temperature range of –40°C to 70°C n Models 8UG1 n 8 ports 10/100/1000-BaseT(X) n Wide operating temperature range of –10°C to 60°C n Supports Jumbo frame transmission up to 9kbytes n Models 8UG1-ET n 8 ports 10/100/1000-BaseT(X) n Wide operating temperature range of –40°C to 70°C n Supports Jumbo frame transmission up to 9kbytes 75

IEEE Ethernet standards Models Features 802.3/u 802.3x 802.3ab RJS XX 8US1 XX Unmanaged - Fast X RJS XX 8UG1 XX Unmanaged - Gigabit IEEE 802.3/u 10 Mbps & 100 Mbps fast Ethernet IEEE 802.3x Full-Duplex with flow control IEEE 802.3ab 1000 Mbps Gigabit Ethernet Ethernet features RJ45 Ports 8 shielded RJ45 ports 10/100 BaseT(X) or 1000 Base T(X) Connectors for RJ45 ports RJFTV: jam nut receptacle based on MIL-DTL-38999 III Olive drab cadmium or nickel plated RJ45 speed 10, 100 or 1000 Mbps auto -negotiation Full / Half duplex Automatic MDI/MDIX Auto-crossover Environmental specifications Safety UL 60950-1, CAN/CSA-C22.2 No.60950 EMI emissions U.S.A.: FCC Part 15 CISPR 22 U.E. EN55011, EN61000-6-4, EN55022 Class A, EN61000-3-2/3, EN55024, IEC61000-4-2/3/4/5/6/8, EN61000-6-2 Shocks MIL-STD-810F: 40g, 11 ms, 18 saw tooth shocks Vibrations RTCA/DO-160C sinusoidal vibrations 5-55 Hz: 0.01 inch: 55-500 Hz : 1.5 g Altitude MIL-STD-810F: 50.000 ft - 15.000 m Temperature Operating models 8UG1: -10°C to +60°C A models 8US1: -40°C to +70°C m models 8UG1-ET: -40°C to + 70°C p h Storage all models: -40°C to +85°C e n o Weight approx 2.8 kg l Power supply Input voltage 8US1, 8UG1, & 8UG1-ET: 12-48 VDC, redundant power input (P1 and P2) 8US1-704 & 8UG1-704: 12-33 VDC, single power input (P1 only) 8US1-PSM & 8UG1-PSM: 85-264 VAC single power input Input power 5 W max Connectors for power MIL-DTL-38999 III jam nut receptacle, olive drab cadmium or nickel plated 1 connector TVx07xx0935P: 6 cts # 22D (wire 0.38 mm2 maxi) 1 connector TVx07xx0935PA (for PSM option) “OK” contact output Sourcing power ; maximum current: 1 A @ 24VDC Not available for -704 and -PSM options Additional power protection for models MG7F3G-704 (option-704) MIL-STD-461E CE102 conducted emission DEF-STAN-59-41 DCE01/DCE02 DEF-STAN-61-5 Pt 6 MIL-STD-704A 600V input transient, applied for 10us MIL-STD-1275A Spikes: +/- 250 V for 100us Surges: 100 V for 50 ms at 0.5 mohm Ripple: 14VAC pk-pk 76

Description 1 IP68 aluminium enclosure with cadmium conductive plating 1 or black paint (RoHS) 2 Redundant power inputs 2 3 Balance pressure vent 8 rugged IP68 4 RJF TV Ethernet ports 3 5 Fixture for vertical mounting Optional caps available 4 IMPORTANT NOTE This model has no LED indicator. 5 Description (in mm) 6699 226600 224400 2233 00 11 99 66 88 99 11 11 11 l o n e h p 1111 m A 44 66 44 22 88,,55 3366,,55 MMaaxxii 9900 66 Pin-out for the power connector PP22-- PP11-- PP11-- NN PP22++ PP11++ PP11++ LL OOKK ((33&&66)) 8US1-704 & 8UG1-704 8US1-PSM & 8UG1-PSM 8US1, 8UG1, & 8UG1-ET P1: 12-33VDC L: 85-264 VAC P1 and/or P2: 12-48 VDC 3, 4, 5, 6: not connected 4, 5, 6: not connected 77

Part number code Series RJS ML 8US1 - - - Type of Enclosure ML: MIL-DTL-38999 (series III) Receptacles, OD Cadmium Plating BKN: RAL 9005 (Jet black) Paint on Aluminium box, Nickel plated 38999 (series III) Receptacles, ROHS compliant Type of Electronics 8US1: unmanaged 8 ports 10/100 Base T(X), wide temperature range 8UG1: unmanaged 8 ports 10/100/1000 Base T(X) 8UG1-ET: unmanaged 8 ports 10/100/1000 Base T(X), wide temperature range Optional: transient suppression module; 600V spike suppressor (Blank): no transient suppression module 704: switch equiped with additional transient suppression module Optional: AC power supply (Blank): DC powered PSM: switch powered with 85-264 VAC instead of DC power Optional: Caps for receptacles fixed with cord directly to the receptacle (Blank): no caps included. The Ethernet ports are still sealed but the contacts are not protected. CAPS: attached caps for both power and data included Example: RJS ML 8UG1 704 CAPS: unmanaged switch in an aluminum enclosure with olive drab green conductive cadmium plating, 8 gigabit ports, RJFTV threaded coupling receptacles, additional transient suppression module, caps are added to the switch Remark: All BKN Ethernet switches and nickel plated accessories are RoHs compliants. -704- and –PSM- options can not be selected together. With the -704- option, a filter module is included inside the switch allowing to meet MIL-STD-461 and other aircraft standards. With the -CAPS- option, all the receptacles come pre-equipped with a cap. Accessories Plugs for Ethernet ports Caps for Ethernet ports RJF TV 6 M G: cadmium OD plating A RJSML C7G: cadmium OD plating m RJF TV 6 M N: nickel plating RJSML C7N: nickel plating p Based on MIL-DTL-38999 A simple screwdriver is needed! h No tool required !!! e n o l Backshells for I/O plugs Plugs for I/O ports: We suggest to use MIL-DTL-38999 III MIL-DTL-38999, backshells. cadmium plated, crimp contacts Consult the dedicated catalog (E118) for Two plugs (6 cts # 22D) details. TV 06 RW 0935 S: cadmium OD plating Examples: TV S06 RF 0935 S: nickel plating TVNSA 09 014 : shielding backshell, cadmium OD plating TVNSA 09 023: shielding backshell, nickel plating + 804221 straight heat shrink for sealing Example: RJS ML 8UG1 704 CAPS with an RJSML 8UG1 704 CAPS switch, we suggest to use hereafter accessories: RJF TV 6 M G (up to 8) for Ethernet ports TV 06 RW 0935 S + TVNSA 09 014 + 804221 for power port 78

RJSML-8MF Managed military Ethernet switch - Fast Military Ethernet switch for harsh environment with industrial EMI compliancy Sealed, rugged & managed switch Amphenol offers a managed Ethernet switch with 8 fast ports RJSML-8MF1. The switch can withstand a variety of extreme conditions. Whatever the situation - high temperatures, extreme shocks & vibrations, dust particles or even liquid immersion- there is a solution available. The switch electronics are sealed within a waterproof IP68 metallic enclosure. The conductive cadmium plating is suitable for most demanding EMI-RFI environments. Black paint is also offered when RoHS is required (other colors available). The I/O interface includes redundant power inputs as well as waterproof rugged RJ45 connectors from the RJFTV FIELD threaded product series based on MIL-DTL-38999 (Series III) metallic shell size 19. This serie enables the transformation without tooling of any standard RJ45 cordset into a robust and waterproof connection system. Military applications n Data Acquisition & Transmission n Battlefield communication C4ISR n Rugged Networks n Mobile communications n Test Equipment Key features n 8 Fast Ethernet (10/100 Mbps) ports n Rugged environmental feature n Rugged metal packaging with cadmium or paint protection n MIL-DTL-38999 III connectors for power ol n MIL-DTL-38999 III RJFTV connectors for Ethernet ports n e n IP65/IP68 rated when mated h n Power filtering and protection (-704 option only) p m n MIL-STD-461E (CE03) 600V spike suppression n MIL-STD-704A A n MIL-STD-1275A n RTCA/DO-160B n MIL-STD-810F shocks n RTCA/DO-160C Vibrations n Wide operating temperature range of -40°C to +70°C n MIL-STD-810F Altitude 50,000 ft (15.000 m) Ethernet features n Full-Duplex operation with flow control (no collisions!) n Auto-detecting, auto-crossover and auto polarity n RSTP redundant rings, Couple rings n QoS and CoS priority queuing n SNMP v1/V2C authentification n IGMP for multicast filtering n VLAN for trafic segregation n And much more! 79

IEEE Ethernet standards n IEEE 802.3/u 10 Mbps & 100 Mbps Fast Ethernet n IEEE 802.1p Priority queuing - QoS, CoS, ToS/DS n IEEE 802.3x Full-Duplex with Flow Control n IEEE 802.1D/w Rapid Spanning Tree for redundant rings n IEEE 802.1Q VLAN for traffic segregation Ethernet features n RJ45 Ports 8 shields RJ45 ports 10/100 BaseT(X) n Connectors for RJ45 ports RJFTV: jam nut receptacle based on MIL-DTL-38999 III Olive drab cadmium or Nickel plated n RJ45 speed 10 or 100 Mbps auto –negotiation n Full / Half Duplex Automatic or Configurable n RJ45 MDI/MDIX Auto-crossover n RJ45 TD and RD polarity Auto-polarity n Memory bandwidth 1.6 Gbps (backplane) n Ethernet isolation 1500 Vrms 1 minute n Ring features Advantech X-Ring Pro, Dual Homing, Couple Ring Environmental specifications n EMI emissions EN55022 class A, FCC part 15, IC ES-003 n EMC immunity EN 61000-4-2 EN 61000-4-3 EN 61000-4-4 EN 61000-4-5 EN 61000-4-6 EN 61000-4-8 n Shocks MIL-STD-810F: 40g, 11ms, 18 saw tooth shocks n Vibrations RTCA/DO-160C Sinusoidal vibrations 5-55 Hz: 0.01 inch ; 55-500 Hz: 1.5 g n Altitude MIL-STD-810F: 50.000 ft - 15.000 m n Temperature Operating -40°C to +70°C Storage -40°C to +85°C A Weight Approx 2.8 kg m p h e Power supply n n Input voltage 8MF1 12-48 VDC, redundant power input (P1 and P2) o l 8MF1-704 12-33 VDC, single power input (P1 only) 8MF1-PSM 85-264 VAC single power input n Input power 7.6 W max n Connectors for power MIL-DTL-38999 III jam nut receptacle, olive drab cadmium or nickel 1 connector TVx07xx0935P: 6 cts # 22D (wire 0.38 mm2 maxi) n “OK” contact output Sourcing power ; Maximum current: 1 A @ 24VDC Not available for -704 and -PSM options Additional power protection for models 8MF1-704 (option-704) n MIL-STD-461E CE102 Conducted emission n DEF-STAN-59-41 DCE01/DCE02 n DEF-STAN-61-5 Pt 6 n MIL-STD-704A 600V input transient, applied for 10us n MIL-STD-1275A Spikes: +/- 250 V for 100us Surges: 100 V for 50 ms at 0.5 mohm Ripple: 14VAC pk-pk 80

Description 1 IP68 Aluminum enclosure 2 Redundant power inputs 3 Balance pressure vent 4 8 Rugged IP68 RJFTV Ethernet ports 5 Fixture for vertical mounting 6 Optional caps available IMPORTANT NOTE This model has no LED indicator. Management is done through a web browser Dimensions (in mm) 6699 226600 224400 2233 00 11 99 66 88 99 11 11 11 l o n e h p 1111 m A 44 66 44 22 88,,55 3366,,55 MMaaxxii 9900 66 Pin-out for the power connector 8MF1 8MF1-704 8MF1-PSM P1 and/or P2: 12-48VDC P1: 12-48VDC L: 85-264 VAC 3, 4, 5, 6: Not connected 4, 5, 6: Not connected 81

Part number code Series RJS ML 8MF1 - - CAPS Protection and color ML: Olive Drab Cadmium Plating on enclosure and receptacles BKN: RAL 9005 (Jet Black) Paint on enclosure, Nickel plated receptacles, ROHS compliant ML1019: RAL 1019 (Sand) Paint on enclosure, Olive Drab Cadmium plated receptacles BKN9010: RAL 9010 (White) Paint on enclosure, Nickel plated receptacles, ROHS compliant Type of Electronics 8MF1: managed 8 ports 10/100 BaseT(X) Ethernet switch Optional: transient suppression module; 600V spike suppressor (Blank): no transient suppression module (standard model) 704: switch equiped with additional transient suppression module Optional: AC power supply (Blank): (standard model) PSM: switch powered with 85-264 VAC instead of DC power Optional: Caps for receptacles fixed with cord directly to the receptacle (Blank): no caps included. The Ethernet ports are still sealed but the contacts are not protected. Caps can be ordered separately. CAPS: attached caps for both power and Ethernet ports included (standard model) Example: RJS ML 8MF1 CAPS Managed Ethernet switch in an aluminum enclosure with olive drab green conductive cadmium plating over enclosure and receptacles, 8 ports 10/100 BaseT(X) RJFTV threaded coupling receptacles, caps screwed to the switch. Remark: All BKN and BKN9010 switches and nickel plated accessories are RoHs compliants. 704 and PSM options can not be selected together. With the -704 option, a filter module is included inside the switch allowing to meet MIL-STD-461 and other airborne standards. With the –CAPS option, all the receptacles comes pre-equipped with a cap. Accessories A m p h Plugs for Ethernet ports Caps for Ethernet ports e n RJF TV 6 M G: cadmium OD plating RJSML C7G: cadmium OD plating o RJF TV 6 M N: nickel plating RJSML C7N: Nickel plating l Based on MIL-DTL-38999 A simple screwdriver is needed! No tool required !!! Plugs for I/O ports Backshells for I/O plugs MIL-DTL-38999, We suggest to use MIL-DTL-38999 III cadmium plated, crimp contacts backshells two plugs (6cts # 22D) Consult the dedicated catalog (E118) for TV 06 RW 0935 S: cadmium OD plating details TV S06 RF 0935 S: nickel plating Examples: TVNSA 09 014: shielding backshell, cadmium OD plating TVNSA 09 023: shielding backshell, nickel plating + 804221 straight heat shrink for sealing Example: RJS ML 8MF1 CAPS With a RJSML 8MF1 CAPS Ethernet switch, we suggest to use hereafter accessories: RJF TV 6 MG (up to 8) for Ethernet ports TV 06 RW 0935S + TVNSA 09 014 + 804221 heatshrink for power ports 82

RJSML-MG7F3G Managed military Ethernet switch - 7 fast ports + 3 Gigabit ports Military ethernet switch for harsh environment with industrial EMI compliancy Sealed, rugged & managed switch Amphenol offers a 10 ports managed Ethernet switch RJSML-MG-7F3G. Note: this model replaces the RJSML-9MG1 and the RJSML-9RG1. The switch can withstand a variety of extreme conditions: whatever the situation - high temperatures, extreme shocks and vibrations, dust particles or even liquid immersion there is a solution available. The switch electronics are sealed within a waterproof IP68 metallic enclosure. The conductive cadmium plating is suitable for most demanding EMI-RFI environments. Black paint is also offered when RoHs is required (others colors available). The I/O interface includes redundant power inputs as well as waterproof rugged RJ45 connectors from the RJF TV FIELD threaded product series based on MIL-DTL-38999 (Series III) metallic shell size 19. This serie enables the transformation without tooling of any standard RJ45 cordset into a robust and waterproof connection system. Military applications n Data acquisition & transmission n Battlefield communication C4ISR n Rugged Networks n Mobile communications n Test equipment n Avionic & shipboard systems l o n Key features e h n Rugged environmental feature p n Rugged metal packaging with cadmium or paint protection m n Mil-DTL-38999 III connectors for both power and Ethernet A ports n IP65/IP68 rated when mated n Power filtering and protection (-704 option) • MIL-STD-461E (CE03) 600V spike suppressior • MIL-STD-704A • MIL-STD-1275A • RTCA/DO-160B n MIL-STD-810F shocks n RTCA/DO- 160C Vibrations n Wide operating temperature range of -40°C to 70°C n MIL-STD-810F Altitude 50,000 ft 15,000 m n Ethernet features n 3 ports 10/100/1000-BaseT(X) + 7 ports 10/100-BaseT(X) n Full-Duplex operation with flow control (no collisions!) n Auto-detecting, auto-crossover and auto-polarity n MIL-STD-810F shocks n RSTP for redundant rings n QoS and CoS priority queuing n SNMPv3 authentication and encryption n IGMP for multicast filtering n VLAN for trafic segregation n And much more ! 83

IEEE Ethernet standards Models Features 802.3/u 802.3x 802.3z 802.1p 802.1D 802.1w 802.1Q RJS XX MG 7F3G XX Managed - Gigabit IEEE 802.3/u 10 Mbps & 100 Mbps fast Ethernet IEEE 802.1p Priority queuing - QoS, CoS, ToS/DS IEEE 802.3x Full-Duplex with flow control IEEE 802.1D/w Rapid spanning tree for redundant rings IEEE 802.3ab 1000 Mbps Gigabit Ethernet IEEE 802.1Q VLAN for traffic segregation Ethernet features RJ45 ports 10 shields RJ45 ports 10/100 BaseT(X) or 1000 Base T(X) Connectors for RJ45 ports RJFTV: jam nut receptacle based on MIL-DTL-38999 III Olive drab cadmium or Nickel plated RJ45 speed 10 or 100 Mbps auto -negotiation Typical latency 16 us + frame time @ 10 Mbps (varies on load and settings) 5 us + frame time @ 100 Mbps Full / Half Duplex Automatic or configurable RJ45 MDI/MDIX Auto-crossover RJ45 TD and RD polarity Auto-polarity MAC addresses supported 8192 Memory bandwidth 32 Gbps (gigabit) ; 3.2 Gbps for all other models Ring features Link loss recovery time: 30 ms plus 5 ms per hop (for Ring model only) Maximum switches in ring: 50+ Dual Ring support Environmental specifications EMI emissions EN55022 class A, FCC part 15, IC ES-003 EMC immunity IEC61326-1, IEEE C37.90 Shocks MIL-STD-810F: 40g, 11ms, 18 saw tooth shocks A Vibrations RTCA/DO-160C sinusoidal vibrations 5-55 Hz: 0.01 inch ; 55-500 Hz: 1.5 g m p Altitude MIL-STD-810F: 50.000 ft - 15.000 m h Temperature Operating -40°C to +70°C e n Storage -40°C to +85°C o l Weight approx 2.8 kg Power supply Input voltage MG7F3G: 10-30 VDC, redundant power input (P1 and P2) MG7F3G-704: 10-30 VDC, single power input (P1 only) MG7F3G-PSM: single power input AC or DC - AC voltage: 85-264 VAC/Frequency 47-63 Hz - DC voltage: 120-370 VDC Input power 5 W typical (all ports active) Connectors for power MIL-DTL-38999 III jam nut receptacle, olive drab cadmium or nickel plated 1 connector TVx07xx0935P: 6 cts # 22D (wire 0.4 mm2 maxi) “OK” contact output Sourcing power ; Maximum current : 0.5 A MG7F3G: ON if P1 and P2 have power and switch software is running MG7F3G-704: ON when software is running MG7F3G-PSM: ON when software is running; output power: 24VDC Additional power protection for models MG7F3G-704 (option-704) MIL-STD-461E CE102 Conducted emission DEF-STAN-59-41 DCE01/DCE02 DEF-STAN-61-5 Pt 6 MIL-STD-704A 600V input transient, applied for 10us MIL-STD-1275A Spikes: +/- 250 V for 100us Surges: 100 V for 50 ms at 0.5 mohm Ripple: 14VAC pk-pk 84

Description IP68 aluminium enclosure with 1 cadmium conductive plating 1 or black paint (RoHS) 2 Redundant power inputs 2 3 Balance pressure vent 4 10 rugged IP68 4 RJF TV Ethernet ports 3 5 Fixture for vertical mounting 5 6 Optional caps available IMPORTANT NOTE This model has no LED indicator. 6 Management is done through a web browser Description (in mm) 6699 226600 224400 2233 00 11 99 66 88 99 11 11 11 l o n e h p m A 1111 44 66 44 22 3366,,55 MMaaxxii 88,,55 9900 66 Pin-out for the power connector NN NNCC LL MMGG77FF33GG MG7F3G-PSM PP11 aanndd//oorr PP22:: 1100--3300 VVDDCC L: 85-264 VAC MG7F3G-704 P1 : 10-30 VDC NC: Not connected 1, 6 : Not connected 85

Part number code Series RJS ML MG7F3G - - - Type of Enclosure ML: MIL-DTL-38999 (series III) receptacles, OD Cadmium plating BKN: RAL 9005 (jet black) paint on aluminium box, nickel plated 38999 (series III) receptacles, ROHS compliant Type of Electronics MG7F3G: managed 7 ports 10/100 Base T(X) + 3 ports 10/100/1000 BaseT(X) Optional: transient suppression module; 600V spike suppressor (Blank): no transient suppression module 704: switch equiped with additional transient suppression module Optional: AC power supply (Blank): DC powered PSM: switch powered with 85-264 VAC instead of DC power Optional: Caps for receptacles fixed with cord directly to the receptacle (Blank): no caps included. The Ethernet ports are still sealed but the contacts are not protected. CAPS: attached caps for both power and data included Example: RJS ML MG7F3G 704 CAPS Managed switch in an aluminium enclosure with olive drab green conductive cadmium plating, 7 ports 10/100 Base T(X) + 3 gigabit ports, RJF TV threaded coupling receptacles, additional transient suppression module, caps are added to the switch. Remark: All BKN Ethernet switches and nickel plated accessories are RoHs compliants. 704 and PSM options can not be selected together. With the -704 option, a filter module is included inside the switch allowing to meet MIL-STD-461 and other aircraft stan dards. With the –CAPS option, all the receptacles comes pre-equipped with a cap. Accessories A m Plugs for Ethernet ports p Caps for Ethernet ports h RJF TV 6 M G: cadmium OD plating RJSML C7G: cadmium OD plating e RJF TV 6 M N: nickel plating n RJSML C7N: Nickel plating o Based on MIL-DTL-38999 A simple screwdriver is needed! l No tool required !!! Backshells for I/O plugs Plugs for I/O ports: We suggest to use MIL-DTL-38999 III backshells. MIL-DTL-38999, Consult the dedicated catalog (E118) for cadmium plated, crimp contacts details. Two plugs (6 cts # 22D) Examples: TV 06 RW 0935 S: cadmium OD plating TVNSA 09 014 : shielding backshell, TV S06 RF 0935 S: nickel plating cadmium OD plating TVNSA 09 023: shielding backshell, nickel plating + 804221 straight heat shrink for sealing Example : RJS ML MG7F3G 704 CAPS With a RJSML MG7F3G 704 CAPS switch, we suggest to use hereafter accessories : RJF TV 6 M G (up to 10 ) for Ethernet ports TV 06 RW 0935S + TVNSA 09 014 + 804221 for power ports 86

Rugged USB Solutions NEWUSB3.0 & USB2.0 Field installable Table of contents ol n e USB3.0 NEW ph USB3FTV (USB-A) ............................................................................................................................................................................................................................ 88 m USB3F TV - Transversally sealed receptacles ........................................................................................................................................ 92 A USB3F TV - Hermetic receptacles ............................................................................................................................................................. 95 USB3 receptacle with Self Closing Cap ................................................................................................................................................. 96 Metallic Self Closing Cap (SCC) for USB3F TV square flange receptacles .................................................................................. 97 High reliability USB 3.0 cordsets .............................................................................................................................................................. 98 USB2.0 USBFTV (USB-A) .............................................................................................................................................................................................................................. 99 USBF TV - Transversally sealed receptacles ......................................................................................................................................... 102 USBF TV Hermetic receptacles ................................................................................................................................................................. 104 USBFTV - Receptacles with 360° EMI backshells ............................................................................................................................... 105 USBF TV Through bulkhead ....................................................................................................................................................................... 106 USBF TV Stand off receptacles .................................................................................................................................................................. 107 USBF TV 2.0 receptacle with Self Closing Cap (SCC) ......................................................................................................................... 109 Metallic Self Closing Cap (SCC) for USBF TV square flange receptacles .................................................................................... 110 High reliability USB 2.0 cordsets ............................................................................................................................................................. 111 USBF SC - Quick release series ................................................................................................................................................................. 112 USBBF TV (USB-B) .......................................................................................................................................................................................... 114 USBBF TV Stand off receptacles .............................................................................................................................................................. 117 USBBF TV - Transversally sealed receptacles ...................................................................................................................................... 119 USBB receptacle with Self Closing Cap ................................................................................................................................................ 120 Metallic Self Closing Cap (SCC) for USBB square flange receptacles .......................................................................................... 121 Special USB adaptor for Military & Commercial Aeronautics ......................................................................................................... 122 87

ROHS W COMPLIANT E N N & BZ USB3F TV (USB-A) 0 3 . B S U USB connection system for harsh environment With USB Field, you can insert a standard USB 3.0 cordset into a metal- lic plug which will protect it from shocks, dust and fluids. No hazardous on-field cabling and grounding! Also available a version including plug + cordset: see next page. This metallic plug is connected into a receptacle, using a Tri Start Thread coupling mechanism (MIL-DTL-38999 series III type) with anti- decoupling device for high vibrations. Main characteristics Applications n Sealed against fluids and dusts (IP68) n Embedded computers n Shock, vibration and traction resistant n D ata acquisition and transmission in harsh n No cabling operation in field and no tools required environment n Improved EMI protection n Railways n Tr i Start Thread coupling mechanism (MIL-DTL-38999 series III type) with n Battelfield communication systems anti-decoupling device - Shell size 15 n Navy systems n 2 m echanical coding / polarization possibilities (receptacle insert rotation) n USB3F TV plug retention in the receptacle: 100 N in the axis n Mating cycles: 500 minimum Data transmission Environmental protection USB specification 3.0 n Sealing (when mated): IP68 (temporary immersion) Data rate: up to 5Gb/s for high speed USB n Salt spray: 48 h with nickel plating > 500 h with olive drab cadmium 500 h with marine bronze shell n Fire retardant / low smoke: UL94 V0 and NF F 16 101 & 16 102 D at a s p e e d n Vibrations: 10 – 500 Hz, 10 g, 3 axes: no discontinuity > 1micro s n Sh ocks: IK06: weight of 250 g drop from 40 cm [15.75 in] onto connectors Am 1 0 x higher (mated pair) n Humidity: 21 days, 43°C, 98% humidity ph than USB2.0 n Temperature range: - 40°C / +85°C e n o l Part number code: plug and receptacles without cordset. Series USB3 Field TV USB3F TV 2 A G Shell type 6: plug (without cordset) - For cordset solution, see page 88. 2: square flange receptacle with female USB3.0 termination - For cordset solution, see page 90. 7: jam nut receptacle with female USB3.0 termination - For cordset solution, see page 90. Coding (for receptacle only) A or B Shells material & finish G: aluminium shell - olive drab cadmium plating N: aluminium shell - nickel plating - ROHS compliant ZN: aluminium shell - black zinc nickel plating - ROHS compliant Examples: - plug, olive drab cadmium plating: USB3F TV 6 G - jam nut receptacle, coding B, nickel plating: USB3F TV 7 B N Plug without cordset n Shell type 6 Part number type: USB3 FTV 6 x Nota: assembling instructions on page 89 88

Receptacles n Square flange receptacle 4 mounting holes - Shell type 2 Part number type: USB3 FTV 2 x Panel Drilling Main key Main key Coding A Coding B n Jam nut receptacle Hexagonal nut mounting - Shell type 7 Part number type: USB3 FTV 7 x l o n e h Panel Drilling p m A Main key Main key Coding A Coding B Configuration use For PC to peripheral application, use a crossed USB3 cable For PC to PC application, use a straight USB3 cable « CROS » type in the part number code « STR » type in the part number code RECEPTACLE RECEPTACLE IS CROSSED IS CROSSED 89

Part number code: plugs with cordset. Series USB3 Field TV USB3F TV 6 A 03 G STR Shell type 6: plug (with cordset) Coding A or B Cordset length 03: 0.3 m [11.81 inches] 10: 1 m [39.37 inches] 05: 0.5 m [19.68 inches] 15: 1.5 m [59.05 inches] Shells material & finish G: aluminium shell - olive drab cadmium plating N: aluminium shell - nickel plating - ROHS compliant ZN: aluminium shell - black zinc nickel plating - ROHS compliant * IMPORTANT NOTE Type of cable * • for PC to PC application, use a “CROS” type of cable CROS: high reliability USB3 cable crossed • for PC to peripheral application, use a “STR” type of cable STR: high reliability USB3 cable straight See Configuration use on page 87 OPEN: high reliabilty USB3 cable open  no plug at the end’ Examples: - plug, coding B, with 0.5m length of high reliability USB3 cable crossed, nickel plating: USB3F TV 6 B 05 N CROS - plug, coding A, with 1m length of high reliability USB3 cable straight, olive drab plating: USB3F TV 6 A 10 G STR - plug, coding B, with 0.3m length of high reliability USB3 OPEN, nickel plating: USB3F TV 6 B 03 N OPEN Plug with reinforced USB3.0 cordset n Shell type 6 Part number type: USB3 FTV 6 x xx x CROS USB3 FTV 6 x xx x STR A m p Plug with open reinforced USB3.0 cable h e n n Shell type 6 o Part number type: USB3 FTV 6 x xx x OPEN l 2 codings available for plugs Main key Coding A Coding B 90

Assembly instructions Can be used with most the USB3.0 cordset brands : No tools required! Plug assembly 1. Insert the USB3 cordset into the metallic backshell 2. Insert the retention spacer laterally to the cable (this spacer is soft, in order to adapt to different shapes of overmolding) and slide the overmolding of the USB3-A plug into this retention spacer 1 2 3. Insert the friction ring laterally to the cable 4. Choose the right coding (2 positions) and insert the USB-A plug into the protective plug.Note at this step, the main key is used for polar- ization through the blue seal. 3 4 5 6 7. Screw the backshell on the plug body. A wrench can be necessary to fully tighten it, and the connection to the receptacle can help IMPORTANT NOTE USB3 cordset usable - Not provided The sealing is done by the blue seal. l o n e h p m A Accessories n Metallic caps USBF TVC 2 G Connector type 6: plug 2: square flange receptacle 7: jam nut eceptacle Shells material & finish N: aluminium shell - nickel - ROHS compliant G: aluminium shell - olive drab cadmium BZ: marine bronze shell - ROHS compliant ZN: aluminium shell - black zinc nickel plating - ROHS compliant n Panel gasket for square flange receptacle Thickness: 0,8 mm [.031] P/n: JE15 91

ROHS W E COMPLIANT N N & BZ USB3F TV (USB-A) 0 3 . B S U Transversally sealed receptacles In some applications, a transversal sealing for the receptacle is a « must ». This will prevent fluids and dust from going through the receptacle when plug or cap are not mated to the receptacle. The sealed solution (version "S") has a compound at the rear of the receptacle below. In addition, the Sealed USB3F TV has been successfully tested in very high vibration corresponding to airplane applications. Main characteristics n Sealed against fluids and dusts (IP68) n Shock, vibration and traction resistant n No cabling operation in field and no tools required n Improved EMI protection n Tri Start Thread coupling mechanism (MIL-DTL-38999 series III type) with anti-decoupling device - Shell size 15 n 2 mechanical coding/polarization possibilities by the user (receptacle insert rotation) n USB3F TV plug retention in the receptacle: 100 N in the axis n Mating cycles: 500 minimum Applications Environmental protection n Embedded computers n Sealing (when mated): IP68 (temporary immersion) n D ata acquisition and transmission in harsh n Salt spray: 48 h with nickel plating environment > 500 h with olive drab cadmium n Railways 500 h with marine bronze shell n Battelfield communication systems n Fire retardant / Low smoke: UL94 V0 and NF F 16 101 & 16 102 n Navy systems n Vibrations: 10 – 500 Hz, 10 g, 3 axes: no discontinuity > 1micro s n Shocks: IK06 ► weight of 250 g drop from 40 cm [15.75 in] onto connectors A m Data transmission (mated pair) p USB specification 3.0 n Humidity: 21 days, 43°C, 98% humidity h Data rate: up to 5Gb/s for high speed USB n Temperature range: - 40°C / +85°C e n o l Part number code Series USB3 Field TV USB3F TV 2 S A 03 G STR Shell type 2S: square flange receptacle 7S: jam nut receptacle Coding A or B USB cable length 03: 0.3 m [11.81 inches] 05: 0.5 m [19.68 inches] 10: 1 m [39.37 inches] 15: 1.5 m [59.05 inches] Shells material & finish G: aluminium shell - olive drab cadmium plating N: aluminium shell - nickel plating - ROHS compliant ZN: aluminium shell - black zinc nickel plating - ROHS compliant * IMPORTANT NOTE Type of cable * • for PC to PC application, use a “CROS” type of cable ACROS: high reliability crossed USB3 cable with plug at the end • for PC to peripheral application, use a “STR” type of cable ASTR: high reliability straight USB3 cable with plug at the end See Configuration use on page 87 OPEN: high reliability cable open = no plug at the end Examples: - square flange receptacle, with 0.5m length of high reliability USB3 cable crossed, coding B, nickel plating: USB3F TV 2 S B 05 N ACROS - jam nut receptacle, with 1m length of high reliability USB3 cable straight, coding A, olive drab cadmium plating: USB3F TV 7 S A 10 G ASTR - jam nut receptacle, with 0.3m length of high reliability USB3 cable open, coding B, olive drab cadmium plating: USB3F TV 7 S B 03 G OPEN 92

Receptacles with USB-A cordset n Square flange receptacle 4 mounting holes: shell type 2 Part number: USB3 FTV 2 S x xx x ACROS USB3 FTV 2 S x xx x ASTR Main key Main key Panel drilling Coding A Coding B n Jam nut receptacle hexagonal nut mounting: shell type 7 Part number: USB3 FTV 7 S x xx x ACROS USB3 FTV 7 S x xx x ASTR l o n e h p m A Main key Main key Panel drilling Coding A Coding B 93

Receptacles with open reinforced USB3.0 cable n Square flange receptacle - 4 mounting holes: shell type 2 Part number type: USB3F TV 2 S A xx x OPEN Panel drilling n Jam nut receptacle hexagonal nut mounting: shell type 7 Part number type: USB3F TV 7 S A xx x OPEN Panel drilling A m p h e n o l 94

ROHS N E W COMPLIANT USB3F TV N & BZ Hermetic receptacles In some applications, a transversal hermiticity for the receptacle is a « must ». This will prevent gas from going through the receptacle when plug or cap are not mated to the receptacle. The hermetic solution (version "H") has a compound at the rear of the receptacle. Helium leakage is less than 1.10-6 cm3 per second [0.1 micron cubit ft per hour] at one bar [15 psi] pressure differential. Applications Main characteristics n Embedded computers n Same as the USB3F TV (see page 76)... a complete IP68 sealing of the n D ata acquisition and transmission in harsh receptacle is added (even with no plug or no protective cap mated). environment n Railways n Outside dimensions are the same as the standard USB3F TV (USB-A). n Battelfield communication systems n Vibrations : the compounded version of the USBF TV has been tested in n Navy systems vibration following the NAS 1599 aeronautic specification (ambient tem- perature): Data transmission 5 - 3000 Hz, 20g, 2.5 mm [.1 inch] double amplitude, 3 axes, 12 hours Note: this specification exceeds MIL-C-26500 requirements. USB specification 3.0 Data rate: up to 5Gb/s for high speed USB IMPORTANT NOTE Due to the compound, the coding of the connector must be done in the factory: use the codes A or B in the part number. Example: USBF3TV 2H A 03 G ACROS Coding A Coding B l o n e A coding h Main key p m Main key A B coding Same for jam nut receptacle. Part number code Series USB3 Field TV USB3F TV 2 H A 03 G STR Shell type 2H: square flange receptacle 7H: jam nut receptacle Coding A or B USB cable length 03: 0.3 m [11.81 inches] 05: 0.5 m [19.68 inches] 10: 1 m [39.37 inches] 15: 1.5 m [59.05 inches] Shells material & finish G: aluminium shell - olive drab cadmium plating N: aluminium shell - nickel plating - ROHS compliant ZN: aluminium shell - black zinc nickel plating - ROHS compliant * IMPORTANT NOTE Type of cable * • for PC to PC application, use a “CROS” type of cable ACROS: high reliability crossed USB3 cable with plug at the end • for PC to peripheral application, use a “STR” type of cable ASTR: high reliability straight USB3 cable with plug at the end See Configuration use on page 87 OPEN: high reliability cable open = no plug at the end Examples: - square flange receptacle, with 0.5m length of high reliability USB3 cable crossed, coding B, nickel plating: USB3F TV 2 H B 05 N ACROS - jam nut receptacle, with 1m length of high reliability USB3 cable straight, coding A, ODC plating: USB3F TV 7 H A 10 G ASTR - jam nut receptacle, with 0.3m length of high reliability USB3 cable open, coding B, ODC plating: USB3F TV 7 H B 03 G OPEN 95

ROHS N E W COMPLIANT N & B USB3 Receptacle with Self Closing Cap S(Sepalalsihn gan lde dvueslt IPPr5oo4f ) TrwAtehh acesitesp eU prSriSt nepaBlgcrf o o lCeajresul oU ct(soMtSiimBonIL ngka-s CetC.iy-ca2 aap6lrl 4yea8 urc2etl oomtysmoepasve te)ti,dhc pa efrl roluoyt pmeppcr tteoihrnt eegp cr aytersoct ue tohprf est at yUhcstelSee B.cm3a pfsr qowumha erdenu fseltai tnahngeder USB3F 21 X SCC A m p Version: USB-A (front and back termination) h e Plating Metallized inserts (EMI) n o l Part USB3F 2B SCC Black coated No number * USB3F 2N SCC Nickel plated Yes USB3F 2G SCC Olive drab cadmium plated Yes USB3F 2ZN SCC Black Zinc Nickel No * The part number includes the receptacle + the self closing cap n N ote: Panel gasket with any of these receptacles: JE18 RJF 21 X SCC, USBF 21 X SCC, USBBF 21 X SCC, & IEEE1394 RJ45 version USB2.0-A version USB-B version IEEE1394 version (see page 25) (see page 107) (see page 118) (see page 143) 96

Metallic Self Closing Cap (SCC) For USB3F TV square flange receptacles. This Self Closing cap automatically protects the USB3F TV (type A) square flange receptacles (MIL-DTL-38999 type), protecting your system from dust and water projection. A spring automatically closes the upper part of the cap when the USB plug is removed from the receptacle. [ 1,547048 ] Sealing level IP67 4 ] 5 1 29, 1,16 [ 1 ] 50 19 ] 47,[ 1,87 66 24,[ 0,9 Ø25,30,996] 7 ] [ 18 708 0, [ 30,9 24,61 [ 0,2165 ] [ 0,969 ] 4- Ø 3,25 [ 0,128 ] 31 [ 1,2205 ] l o n IMPORTANT NOTE e Metal Self Closing caps are sold separately (without receptacle). h p m A Green Nickel Black Plating P/N Part Black - ROHS compliant USBFTVSCCB number Nickel - ROHS compliant USBFTVSCCN Olive drab cadmium USBFTVSCCG Black Zinc Nickel USBFTVSCCZN Remark: also compatible with USBFTV 2.0 (type A) & USBBFTV (type B) square flange receptacles. USBFTV2XX (see page 106) USBBFTV2XX (see page 110) n P anel gasket for square flange receptacle (thickness: 0,8 mm [.031]): Part number: JE15 97

ROHS N E W COMPLIANT High Reliability USB 3.0 Cordsets General construction: this is a USB-3.0 cable containing two 28 AWG 90Ω USB3.0 parallel shielded pair, one 28 AWG USB2.0 pair, and two 24 AWG power conductors, overall SFTP shields (SFTP = double shielding, braid and foild), jacketed in black UV resistant Polyurethane HFFR*. Designed for fixed or portable applications in industrial and harsh environments. *HFFR: Halogen Free Flame Retardant. Jacket compound specification: Halogen Free Flame Retardant Polyether-based Polyurethane. Glossy finish. Excellent hydrolysis resistance. High microbial resistance. UV resistant. High flexibility. Applications ELECTRICAL CHARACTERISTICS n Robotics n Railways n Battelfield communication USB3.0 Parallel pair n Motion control n CNC machines n Industrial process Conductor resistance ≤ 210 Ohm/km PHYSICAL CHARACTERISTICS Insulation resistance ≥ 200 MOhm/km Capacitance (1 kHz) nom. 43 nF/km DATA CONDUCTORS Tinned stranded copper, 7/0.13 mm nom (28 Time delay nom. 5.0 ns/m AWG) Time delay skew ≤ 150 ps/10m DATA INSULATION 1 mm nom Operating voltage (peak) ≤ 100 V COLOR DATA PAIR Green & white (USB2.0) Yellow & blue, orange & violet (USB3.0) Impedance 90 ±7 Ohm POWER CONDUCTORS Tinned copper, 7/0.2 mm (24 AWG) Test voltage 500 V POWER INSULATION 1.1 mm nom USB2.0 Pair COLOR POWER WIRE Red & Black Electrical requirements acc. to USB2.0 SHIELDS USB 3.0 pair: foil + stranded tinned copper Impedance 90 ±15 Ohm drain wire. Test voltage 500 V Overall: foil + shield braiding of tinner copper A wires (coverage 85%). Attenuation m JACKET PU compound USB3.0 pair-db/10m USB2.0 pair-db/100m p h COLOR JACKET Black 625 MHZ 10 1 MHZ 4 e WEIGHT 31 lbs/1000ft (46 kg/km) n 1250 MHZ 15 4 MHZ 7.8 o OUTSIDE DIAM. 0.20 inch (5.7 mm nom. +/- 0.2) 2500 MHZ 25 8 MHZ 11.4 l MIN BEND RADIUS 57 mm (10 x O. D.) 5000 MHZ 36 12 MHZ 13.4 (During operation) 7000 MHZ 47 24 MHZ 19 MIN BEND RADIUS 28.5mm (5 x O.D.) (During installation) 48 MHZ 27 ToEpMerPaEtiRoAnTaUlRE installation & Plus 85°C, minus 40°C fo(wr icthaobDuleat taUalsSo nBe p olungly) 9260 0M MHHZZ 3684 400 MHZ 116 IMPORTANT NOTE CORDSETS WITH A USBA PLUG OVERMOLDED ON EACH END for PC to PC application, use a CROSSED cable Length (m/ft) CROSSED wiring part number STRAIGHT wiring part number for PC to peripheral application Black overmolding Blue overmolding use a STRAIGHT cable 0.5 m / 1.64 ft USB 3 A A CROSSED 50 PU HFFR USB 3 A A STRAIGHT 50 PU HFFR see page 87 UNDER USB3 SPECIFICATION 1 m / 3.28 ft USB 3 A A CROSSED 100 PU HFFR USB 3 A A STRAIGHT 100 PU HFFR ≤1.8 M 1.5 m / 4.92 ft USB 3 A A CROSSED 150 PU HFFR USB 3 A A STRAIGHT 150 PU HFFR 1.8 m / 5.91 ft USB 3 A A CROSSED 180 PU HFFR USB 3 A A STRAIGHT 180 PU HFFR 2 m / 6.56 ft USB 3 A A CROSSED 200 PU HFFR USB 3 A A STRAIGHT 200 PU HFFR 2.5 m / 8.20 ft USB 3 A A CROSSED 250 PU HFFR USB 3 A A STRAIGHT 250 PU HFFR 3 m / 9.84 ft USB 3 A A CROSSED 300 PU HFFR USB 3 A A STRAIGHT 300 PU HFFR OUT OF USB3 SPECIFICATION 3.5 m / 11.48 ft USB 3 A A CROSSED 350 PU HFFR USB 3 A A STRAIGHT 350 PU HFFR >1.8 M 4 m / 13.12 ft USB 3 A A CROSSED 400 PU HFFR USB 3 A A STRAIGHT 400 PU HFFR 4.5 m / 14.76 ft USB 3 A A CROSSED 450 PU HFFR USB 3 A A STRAIGHT 450 PU HFFR 5 m / 16.40 ft USB 3 A A CROSSED 500 PU HFFR USB 3 A A STRAIGHT 500 PU HFFR 98

ROHS COMPLIANT N & BZ USBF TV (USB-A) USB connection system for harsh environment With USB Field, you can insert a standard USB 2.0 cordset into a metal- lic plug which will protect it from shocks, dust and fluids. No hazardous on-field cabling and grounding! This metallic plug is connected into a receptacle, using a Tri Start Thread coupling mechanism (MIL-DTL-38999 series III type) with anti- decoupling device for high vibrations. Main characteristics n Sealed against fluids and dusts (IP68) n Shock, vibration and traction resistant n No cabling operation in field and no tools required Applications n Improved EMI protection n Embedded computers n Tr i Start Thread coupling mechanism (MIL-DTL-38999 series III type) with n D ata acquisition and transmission in harsh anti-decoupling device - Shell size 15 environment n 2 m echanical coding / polarization possibilities by the user n Railways (receptacle insert rotation) n Battelfield communication systems n USBF TV plug retention in the receptacle: 100 N in the axis n Navy systems n Mating cycles: 500 minimum Environmental protection Data transmission n Sealing (when mated): IP68 (temporary immersion) USB specification 2.0 n Salt spray: 48 h with nickel plating Data rate: up to 480 Mbps for high speed USB > 500 h with olive drab cadmium 1000 h with marine bronze shell n Fire retardant / low smoke: UL94 V0 and NF F 16 101 & 16 102 n Vibrations: 10 – 500 Hz, 10 g, 3 axes: no discontinuity > 1micro s n Sh ocks: IK06: weight of 250 g drop from 40 cm [15.75 in] onto connectors ol (mated pair) n e n Humidity: 21 days, 43°C, 98% humidity h n Temperature range: - 40°C / +85°C p m A Part number code Series USBF TV 2 1 G USB Field TV Shell type 6: plug 2: square flange receptacle 2PE: square flange receptacle with metal backshell (type 1) & with metal backshell + plastic gland (type 2) 2PEM: square flange receptacle with backshell + metal gland (only for back termination type 2 = Solder) 7: jam nut receptacle 7PE: jam nut receptacle with metal backshell (type 1) & with metal backshell + plastic gland (type 2) 7PEM: jam nut receptacle with backshell + metal gland (only for back termination type 2 = Solder) Back terminations (receptacles only) 1: female USB-A 2: solder (4 tinned holes) Shells material & finish N: aluminium shell - nickel plating - ROHS compliant G: aluminium shell - olive drab cadmium plating BZ: marine bronze shell - ROHS compliant ZN: aluminium shell - black zinc nickel plating - ROHS compliant Examples: - Olive drab cadmium plug: USBF TV 6G - Olive drab cadmium square flange receptacle, USB-A back terminat°: USBF TV 21G - Olive drab cadmium jam nut receptacle, USB-A receptacle back terminat°: USBF TV 71G - Nickel jam nut receptacle, solder back termination: USBF TV 72N 99

Plug n Shell type 6 USBF TV 6 X Receptacles n Square flange receptacle 4 mounting holes: shell type 2 USBF TV 2 XX Panel Drilling n Jam nut receptacle Hexagonal nut mounting: shell type 7 A m p h e n USBF TV 7 XX Panel Drilling o l n Receptacles with backshell: 868.69.9 [ 3[3..442222]] 72.7 [2.862] Shell type 2PE and 7PE Backshell used with back termination type 1: Backshell used with USB A receptacle (Not sealed) back termination type 2: Same panel drilling as USBFTV 2xx Solder (Sealed – IP68) Panel Drilling (for type 2 only) USBF TV 2PE / 7PE-1 USBF TV 2PE(M) / 7PE(M)-2 Back terminations Type 1: USB-A Receptacle Type 2: Solder View of the PCB of the Type 1: female USB-A 4 TinTsnoypledede 2rh :4 o Tleinsn teod s hooldleesr t yoo suorld cearb yloeur cable TypV4e ite i2wn nv oeefdr ts hhioeo nlPe Csw Bfio torh fs 4toh ltdei neTrny tpeeedr m2 ivneartsiioonn with holes for solder termination 100

Assembly instructions Can be used with most the USB cordset brands : No tools required! Plug assembly 1. Only if you need a full sealing (IP68): Install the white sticker around the plug, covering the 4 little holes of the overmolding 2. Insert the black O Ring around the front face of the USB A plug. This O Ring will ensure connection sealing 1 2 3. Insert the USB cordset into the metallic backshell 4. Insert the retention spacer laterally to the cable (this spacer is soft, in order to adapt to different shapes of overmolding) and slide the overmolding of the USB-A plug into this retention spacer 5. Insert the friction ring laterally to the cable 6. Choose the right coding (2 positions) and insert the USB-A plug into the protective plug. Note at this step, the main key is used for polar- 3 4 ization. MAIN KEY USB insulation on the left USB insulation on the right 5 6 PLUG RECEPTACLE 7. Screw the backshell on the plug body. A wrench can be necessary to fully tighten it, and the connection to the receptacle can help IMPORTANT NOTE The connection sealing is not done by the black retention spacer (which is sloted), but by the front face ORing (fig.2) 7a 7b l o Receptacle assembly n e Insert the USB module from the rear. Reference is main key. Beware to h have a coding compatible with the coding you used for the plug: p on front view, the white shapes in the USBs must be on the same side. m A Example : coding B To remove the USB module, insert the removal tool USBF ODE from the Front, and push back the module. Accessories n Metallic caps USBF TVC 2 G Connector type 6: plug 2: square flange receptacle 7: jam nut eceptacle Shells material & finish N: aluminium shell - nickel - ROHS compliant G: aluminium shell - olive drab cadmium BZ: marine bronze shell - ROHS compliant ZN: aluminium shell - black zinc nickel plating - ROHS compliant n Panel gasket for square flange receptacle Thickness: 0,8 mm [.031] P/n: JE15 n Receptacle insert removal tool: p/n USBF ODE 101

ROHS COMPLIANT N & BZ USBF TV Transversally sealed receptacles In some applications, a transversal sealing for the receptacle is a « must ». This will prevent fluids and dust from going through the receptacle when plug or cap are not mated to the receptacle. The sealed solution (version "S") has a compound at the rear of the receptacle below. In addition, the Sealed USBF TV has been successfully tested in very high vibration corresponding to airplane applications. Main characteristics Applications n Sealed against fluids and dusts (IP68) n Embedded computers n Shock, vibration and traction resistant n D ata acquisition and transmission in harsh n No cabling operation in field and no tools required environment n Improved EMI protection n Railways n Tri Start Thread coupling mechanism (MIL-DTL-38999 series III type) with n Battelfield communication systems anti-decoupling device - Shell size 15 n Navy systems n 2 mechanical coding/polarization possibilities by the user (receptacle insert rotation) n USBF TV plug retention in the receptacle: 100 N in the axis Data transmission n Mating cycles: 500 minimum USB specification 2.0 Environmental protection Data rate: up to 480 Mb/s for high speed USB n Sealing (when mated): IP68 (temporary immersion) n Salt spray: 48 h with nickel plating IMPORTANT NOTE > 500 h with olive drab cadmium Due to the compound, the coding of the connector 1000 h with marine bronze shell must be done in the factory: use the codes A or B in n Fire retardant / Low smoke: UL94 V0 and NF F 16 101 & 16 102 the part number. Example: USBFTV 2S A 2 N 03 A n Vibrations: 10 – 500 Hz, 10 g, 3 axes: no discontinuity > 1micro s Receptacle n Shocks: IK06 ► weight of 250 g drop from 40 cm [15.75 in] onto connectors A Connection side view (mated pair) m Main key n Humidity: 21 days, 43°C, 98% humidity p n Temperature range: - 40°C / +85°C h e USB insulation USB insulation n on the left on the right o l Coding A Coding B Part number code Series USBF TV 2PES A 2 N 03 A USB Field TV Shell Type 2S : square flange receptacle 2PES: square flange receptacle + backshell + plastic gland 2PEMS: square flange receptacle + backshell + metal gland 7S: jam nut receptacle 7PES: jam nut receptacle + backshell + plastic gland 7PEMS: jam nut receptacle + backshell + metal gland Coding "A" (Standard) or "B" Back terminations 2: rugged USB cable (see corresponding datasheet page 109) Shells plating N: nickel G: olive drab cadmium ZN: aluminium shell - black zinc nickel plating - ROHS compliant USB cable length 03: 30 cm [11.81 inches] 05: 50 cm [19.68 inches] 10: 1 meter [39.37 inches] USB cable end A: standard USB-A plug OPEN: open cable (no connector) Examples: - Olive drab cadmium square flange receptacle with 30 cm of USB cable and standard USB-A plug: USBF TV 2S G 03 A - Nickel jam nut receptacle + backshell + plastic gland, with 1 meter of USB cable, and a standard USBA-A plug: USBF TV 7PES N10 A 102

Receptacles n Square flange receptacle 4 mounting holes: shell type 2 USBF TV 2SA XXX Panel drilling n Jam nut receptacle hexagonal nut mounting: shell type 7 USBF TV 7SA XXX Panel drilling n Jam nut receptacle hexagonal nut mounting: shell type 7 86.9 [3.422] 72.7 [2.862] l o n e h p m Backshell used with back termination type 1: Backshell used with A USB A receptacle (Not sealed) back termination type 2: Solder (Sealed – IP68) USBFTV 2PE(M) SA2XXX / USBFTV 7PE(M) SA2 XXX Panel drilling Cordset end USB cable end type "A" USB cable type "OPEN" 103

ROHS N E W COMPLIANT USBF TV N & BZ Hermetic receptacles In some applications, a transversal hermiticity for the receptacle is a « must ». This will prevent gas from going through the receptacle when plug or cap are not mated to the receptacle. The hermetic solution (version "H") has a compound at the rear of the receptacle. Helium leakage is less than 1.10-6 cm3 per second [0.1 micron cubit ft per hour] at one bar [15 psi] pressure differential. Applications Main characteristics n Embedded computers n Same as the USBF TV (see page 76)... a complete IP68 sealing of the n D ata acquisition and transmission in harsh receptacle is added (even with no plug or no protective cap mated). environment n Outside dimensions are the same as the standard USBF TV (USB-A). n Railways n Battelfield communication systems n Vibrations : the compounded version of the USBF TV has been tested in n Navy systems vibration following the NAS 1599 aeronautic specification (ambient tem- perature): Data transmission 5 - 3000 Hz, 20g, 2.5 mm [.1 inch] double amplitude, 3 axes, 12 hours Note: this specification exceeds MIL-C-26500 requirements. USB specification 2.0 Data rate: up to 480 Mb/s for high speed USB IMPORTANT NOTE Due to the compound, the coding of the connector must be done in the factory: use the codes A or B in the part number. Example: USBFTV 2H A 2 N 03 A Receptacle Connection side view A m Main key p h e USB insulation USB insulation on the left on the right n o l Coding A Coding B Part number code Series USBF TV 2H A 2 N 03 A USB Field TV Shell type 2H : hermetic square flange receptacle 2PEH: hermetic square flange receptacle + backshell + plastic gland 2PEMH: hermetic square flange receptacle + backshell + metal gland 7H: hermetic jam nut receptacle 7PEH: hermetic jam nut receptacle + backshell + plastic gland 7PEMH: hermetic jam nut receptacle + backshell + metal gland Coding "A" (standard) or "B" Back terminations 2: rugged USB cable (see corresponding datasheet page 109) Shells plating N: nickel G: olive drab cadmium ZN: aluminium shell - black zinc nickel plating - ROHS compliant USB cable length 03: 30 cm [11.81 inches] 05: 50 cm [19.68 inches] 10: 1 meter [39.37 inches] USB cable end A: standard USB-A plug OPEN: open cable (no connector) Examples: - Olive drab cadmium hermetic square flange receptacle with 30 cm of USB cable and standard USB-A plug: USBF TV 2H G 03 A - Nickel hermetic jam nut receptacle + backshell + plastic gland, with 1 meter of USB cable, and a standard USBA-A plug: USBF TV 7PEH N10 A 104

ROHS N E W COMPLIANT N USBF TV Receptacles with 360° EMI backshells USBFTV receptacles series with EMI backshells provide 360° shielding: same protection than the one proposed per standard MIL-DTL-38999 serie III connectors. We offer these EMI backshells with square flange and jam nut receptacles. The available platings are nickel or olive drab cadmium. With those solutions we suggest using our reinforced USB cable (shielded – zero halogen jacket) ►see page 109 We can provide those receptacles: • with cordset already soldered • without cordset Example with a square flange receptacle (provided without cable) l o n e h p m A Plating Square flange Jam nut IMPORTANT NOTE Part receptacle receptacle With receptacles provided without cable, customer will have to solder his cable on the PCB ; please find below the number Nickel - ROHS compliant KIT40263 KIT40245 cabling specification. Olive drab cadmium KIT40263G KIT40245G If customer prefers to use his cable, please check with us compatibility with our EMI backshells: www.usbfield.com Black zinc nickel plating - KIT40263ZN KIT40245ZN ROHS compliant 105

N E W USBF TV Through bulkhead Receptacle A m p h e n Plating P/N o Part l Nickel - ROHS compliant USBF TV B 2 N number Olive drab cadmium USBF TV B 2 G Black zinc nickel - ROHS USBF TV B 2 ZN compliant Nota : could be used with plug USBFTV, nickel and olive drab cadmium. See page 97. 106

ROHS COMPLIANT N USBF TV Stand off receptacles These receptacles can be soldered directly to your PCB. A compound insures a transversal sealing and good performance in high-vibration environments. The shell of those receptacles are in the “Stand Off” style. They can be connected with rugged USBF TV series plugs. 33.17 Square flange receptacle 2020,.0077[3[113.3,,031607]6]131,3.11 3[13,,3107363.].55 AA 44 Coding B isD aalstoa asv faoilra bcoled, pinlegas Ae consult us. [0[0,.7799]] [0[0,.551166]2]0,07 [,13[,811 338T, O 1T O, 1 ,15577]] 3.5 A 430,96 45 45 [0,79] [0,516] [,138 TO[1 ,,211597]] 3300,.9966 23,01 [[11.,21291]9] ECHELLE 6,000 ECHELLE 6,000 DANS LE BUT CONSTANT D'AMELIORER SES PRODUITS, Amphenol Socapex SE RESERVE LE DROIT D'EN MODIFIER TOUTE COTE OU CARACTERISTIQUE.DANS LE BUT CONSTANT D'AMELIORER SES PRODUITS, Amphenol Socapex SE RESERVE LE DROIT D'EN MODIFIER TOUTE COTE OU CARACTERISTIQUE.DANS LE BUT CONSTANT D'AMELIORER SES PRODUITS, Amphenol Socapex SE RESERVE LE DROIT D'EN MODIFIER TOUTE COTE OU CARACTERISTIQUE.IMP 036 AIMP 036 AIMP 036 A [[[1112[2[2[[[[,,,222000333,,,000555,,,,,,111111,,,333999888222222777333888]]]000222777]]]151515555]]]0,591[]0,591[]0,591[]PPPPPPEEEAAARRRNNNCCCEEEAAALLL444[[[GGG 5550002221[1[1[EEEDDD,,,333000,,, RRR999,,,,,,222PPPIII000000000777666AAALLL111555]]]1[1[1[]]]NNNLLL000555NNNIII,,,EEENNN555AAAGGG999UUU111]]]1[1[1[DANS LE BUT CONSTANT D'AMELIORER SES PRODUITS, Amphenol Socapex SE RESERVE LE DROIT D'EN MODIFIER TOUTE COTE OU CARACTERISTIQUE.000,,,IMP 036 A,,,222000777NR[444UoUo555Pn1444 oneSn2[S[,]]]AAA2555 Btau03 B,t0tc5RRRah ,,h1 1ir,iEEEmnoe3 9n82e2:7CCCtAAA s 38 s]lf0ruOOOme2 SSSu7]io15bgf5lMMM] latarhPPPWWWe0,591[]t mtctiOOOIIIiPPooroNNNTTTEAnCn0,320,320,32EEEdeHHHRNNNNDANS LE BUT CONSTANT D'AMELIORER SES PRODUITS, Amphenol Socapex SE RESERVE LE DROIT D'EN MODIFIER TOUTE COTE OU CARACTERISTIQUE.OOOoiCEnnTTTIMP 036 AUUU0,013[]0,013[]0,013[]ALnSSSg[TTT23.0123.0123.01d4,134,134,13G BcNO021[ n4[4[4[4T4T4TED[B[0.906][0.906][0.906],oe30,lP111 1111Ri H H Hal90,163[]0,163[]0,163[]e,,,2mc2[i [,dPI0,,,2p,,,c0HRHRHR0lv703c,0k6A5uL15kp666l222,,OUOUOUe 11M]1[te,]eNLP 3982l2g222888L L L 057z iaiNI3l8d]ao,0i5552C aEAEAEAE7Ns]n15-5n5]]]r]enAGSLSLSL i92[2[2[caBRtn 0,591[]U0001,,, L L LPc bP]PnOs,,,555R o1[ M M M RHRHRHlhE111A444ki0 ,inae3F3F3FHccEOEOEOdRN,2eo000000sktaOOOCLCLCL0C7EcS4e,,,,,,uyie5AOEOEOEL dRRRle4000000n [[[][lA elcG111 M M M 50505050.320.320.32t v000 R0mp21[Ø25,5Ø25,5Ø25,5...g- oE111DEMLMLML... ,uPPP30 ,i222CA999L R000[,013][,013][,013]Rt9mEAEAEAeO,,2]]]s777SiCCC555PIa0Mu O00.NYNYNY7A[1,006][1,006][1,006]w]]]PBBB6WAL[[[15222pcDODODOOmIH]1[]000NY333LNTEUEUEUll050,32......ENHISie,ONDTDTDT999aO000EN TU50,013[]000111 SnAGT23.0196664,13UPPP4[U4T111[[[]]]1[0.906]t1CCC1]... H0000,163[]1[T,,222HR...BBB0,627772,540,052,540,052,540,05000OU,2 28555L (0740,10,0019[]0,10,0019[]0,10,0019[]5]]]EAUUUC54 ]2[2[2[SL]2[A50,SSS L000000oR,5EM [[[RH1,,,4,,,BBBCØØØAd3FEO,,,OS 77700111000OCLFFF000Mf ,,...iOERP99944477700Wo[Ø 25.5 3[3[3[0001nOM 500.32I TTT0000]]]Ø25,5.1N222ML.T111r333P±±±20,329E0[,013]H±±±VVVEAg]7[1.006] C,,,5N,,,,,,OcNY000[1,006]]000BTU[0,013[]2 PDO...333 111oS0222000T23.0134,13AEU000..2220004[7774T/DT[0.906]90d555555]]]11N0 H1MODIFICATIONSMODIFICATIONSMODIFICATIONS0,163[] 666)6[[[444,, HRPi1]]][] ZNG,,, 6n2COU.0-AAA 2111HHH.2B8L [[[N 71[1[1[2,540,050g222OOO5SEAFFPPP5PPP]666LLL0003330,10,0019[]]SL 2[AAA44+ + + oF EEEAAAA0, LPPP,,,,,,,0,0,0, 5SSSNNNlll5M 54NNN000RH[143[3[3[l555111 aaaØ0003F,EONNNdEEE199 nnnØØØ5888000000111OCL.,,4 EEE]]]333LLL0OER ,,,e9000666ooo[...21M 50AAA±0.32 0rrr ]]]±Ø25,5111.2221,ML.rPiii02UUU90+ + + 0[,013],,,EA.C12S111]7ggg C00000005h0 NY s[1,006]oiii2&&]222...B8885[ 2]DO=nnn MODIFICATIONSd222430i555UUU3[4000]]] EUeeeS. i.d==, nhDTlll...90A5[5[5[ 4441HSSS [SSSSPig01 e2OPeio111P6P000g l 6LPdABBBw1[]2[2[2[AA[+ n EA888PC.0P,,,,0 MMMe TTTa SNlN-000N20,,,.EEEBAvFFF3[rl a 0 72,540,050N111PAAA--CCCE nØN803[[[ NSSS,,, 4445W R[[[ i[EiHHH]3MMMPPPLTTT0,10,0019[]999nAAA,]XXX0o Ee333.Ee,,,hEEE000A fr dPPPs.12AAACCCAiLLL7771LIIIiVVVt...U + o111,999&QQQep1gw1LLLUCCC 00[]]]XXXBBB , i NNN]]]2Ø.555&8o8b2EEE,333 444nr2 15BBB ]l0]002225III sega. ]]] 8884l.i4.cr5[4S 0c1tUUUe1110[kSSS 1iAAA 20DDD M8Pe 0± o52[wo...±n...8 ,.,2M T[ Mn100,TTTEi A0AAABBB/r.w0 0001A.CARRE 0.6CARRE 0.6CARRE 0.6C9d6664 e0S,4AAA:444.[NXHA0iMOOOPBBBs7P[9A0 X2r666 E0mmm 5 ePPU]]I9APPPCi555XCMODIFICATIONSL7IOOO s]9QC[4SL4333C n ]XBAAAIBUN]pppSQUARE [,024]SQUARE [,024]SQUARE [,024]RRR,EB 4 ] 2,542,542,54,,,BBA222I S 1H2 GZN[] gUUU1B .2O999U1hhhP1110.P .D2TTT06LFFF6222 NCARRE 0.6. .Ac . + EA0,1[]0,1[]0,1[]6EEE0555P AFaFB,0eee0---OOOACARRE 0.6 S6N 3...lAN0bcB3[SSS a7776 0m aNl 4FFF4P EFTSQUARE [,024]2.54 neØ8O20888nnnb7773 A E]3]]] pSQUARE [,024]R.LEMA ( EMA ( EMA ( Ol2,54,...25o85e4444 . UAr oooBBBFFF9h12 [0.1]MIVWMfMIVWMfMIVWMf 333TFi111.2 U+ 99,510,1[]E1g111e00-OFFF.BLEaIoBLEaIoBLEaIolll 1iS2.1118 111Fn 9LLL208n5FFF70] A-ClLrA-ClLrA-ClLre EMA ( 000] .4l.5[4oSBFOOOMIVWMf TTT3SD l- SD l- SD l- 1]]]1AAA0 1FSSSBLEaIoHHHl 2[118ETF DpETF DpETF DpDANS LE BUT CONSTANT D'AMELIORER SES PRODUITS, Amphenol Socapex SE RESERVE LE DROIT D'EN MODIFIER TOUTE COTE OU CARACTERISTIQUE.L,MTF YYYA-ClLr0,E 0TTT 1IMP 036 AAoooOCSLImTrSLImTrSLImTrTEEESD l- S,RRR4][AHNNNMPSH9A XZZZETF DpE0 -XoLi -XoLi -XoLiPYcccACTL7IVVVo SLImTrE9QRLCN]XBC3Au-nC3Au-nC3Au-n[N]ZCCCE -XoLi4 caaaBVGGG I 1EEE]A8Tn3tA8Tn3tA8Tn3tC3Au-nCPPP aU2[1 [G,DDD EDppp2A8Tn3t[P.R9It8eR9It8eR9It8e2 03.,D00222pEEE5R9It8eA320E,CARRE 0.6,.611EEER9Oi9dR9Oi9dR9Oi9dAeee2[3[2[3[2[3[XXX9,.EBR9Oi9de[CCCX C683m98 223P7O0 E9Nn9 010101 E9Nn9 E9Nn9 E9Nn9 303030x34 3xxx7A8444]C12SpSQUARE [,024]R51502,54,E Sg9c 224555] h ,,,,,,E Sg9cE Sg9cE Sg9c,,,,,,7 B ]Uo444&&159R h9SS iBBB 5 ]TFH=2 d RRR929292SS iSS iSS i43090909[0.591]0,1[]E0 ECrsrT eHHH-OOxS. i0,591[]=S=n6 CRIeecE010101 ECrsr ECrsr ECrsrh161616RF TTT-L8n DTOOOPxxx7P] SPig OIRcruEMA ( OeEE.E 4696969CRIeecCRIeecCRIeecioEEERRRFEoBFgAl SC---NECeiiLLLMIVWMf C3Ud1BDw1DTDTDTSSH]]]]]]n 1OIRcruOIRcruOIRcruRFF UpetNOOOBLEaIolINS 9EEEEEEe1aEEE -14LNIFFFFrlOIIts SCSCSCA-ClLrC E1NECeiiNECeiiNECeii 0EM CCC:QPUUUI111DDD--SSSOSHSHSHTRITa b U SD l- M-WAM]LiR534AF UpetF UpetF Upet4ESH nINININSSS999[MI cIo eETF DpR35P:h PGY 444TNININI5sDd OIIts OIIts OIIts o0°EIlIa9SLImTriE L111R21[FBEEEt MMMN:Q:Q:Q IIIYED[1p&EZe, MeIr -XoLiP .C3c00,RITa bRITa bRITa b U U UOTV.MMM --- MMM oR555l333 &2b9AP d.C3Au-nO-EEE,,C2Re G0a MI cIoMI cIoMI cIolG7sRRRP333NgIPPP0aE Rcw) :::UA8Tn3tU PPP20057PA i crDDD2IDpt 6LIoiEIlIaEIlIaEIlIaA]LR9It8ee999R41 k5LLL0LP2EiFFFBBBeYYYo ]/LAMnt1[ER9Oi9d]e2[SXw NEEE3LCCA MeIr MeIr MeIrn0OPPP[ ...CCC[nOOO0TTT Efh50 E9Nn9 31iP02 -3T0NNIxr4wlll P23,01AP dAP dAP d / e55OOO,.3No ---,E Sg9c., :AI04RRR4eeeGGG9Ei0 lE5NBsLr.NNNR5OrsO9 8SS ie Rcw) Rcw) Rcw)0N00 UUUe0 a9UUUUL222HAAA0,906[] A HG s961Rmt222III0 ECrsr11NSTE2 LIoiLIoiLIoiOx RRRU444U]O000nB]LLLPPP11Msa6CRIeecEERN-LS/2DT///LLL]AMntAMntAMnt]SSSE n OIRcru333ALB1[0OCCC.AAAEEE 30,960000OOO[e3F12SCtdNECeiiEU Efh Efh Efh0,CU0 1DPPP---333STTT/cSSH.NNN.0o 23,0123,0123,01.F Upet20a,2SINS9/// l0 1,219[]1No No No 48IIIAAA000bNIc7oEEEOIIts 000lll0 7 51LLL E/Ma:QIl4MOrsOrsOrsedOOOf888eee]RITa bNNN Ub0005M-4M14LLL 530,906[]0,906[]0,906[]E lf]MI cIoR5e3A3RmtRmtRmtP5: NNNPEEE222rD °REIlIa9 LFB111MsaMsaMsaFYEEEEiE MeIrNNNP .C///OCTAOll E nE nE nAP dAAAO-O000SRelG30,9630,9630,96RN Rcw)M U333 U2itdtdtdA UUU2IP///WLIoin SSSR40LPPOo o o I000/LAMntS 0.3231,219[]1,219[]1,219[]111CANAT0O888gooo Efh0,32P23.01-E3THN///23,01N/ No NOIA0[0.013]fffE0lLT111EU0,013[]OrsO8e4.13N[0.906]0L0,906[]Sfff T23.01RmtL4,134T NE2F4[4T1HMsa [0.906]E[0.163]OHN[4/11 H0,163[]1E nRA0130.96OR30,96,,.HR3Utd.U6 2/SL6P2OU2o [1.219]08EA1,219[]1C2885L oSL/]B5EAf L1M]SLf2[30, L,5M RH143FEO00OCL,,OER00[1M 500.32 0Ø25,5.1ML.P290[,013]EA]7C51NY[1,006]]B[2DO03EU..0DT9001 6PAmphenol1[]7C.02.B72,540,05050,10,0019[]]2[00[,,Ø,7100.9473[00]213±±,,,00.31002075]MODIFICATIONS6[4], A 1H[1[2OPP6L03A+ EAP,,,0 SNlN03[51 a0NE nØ801 E]3L,6o.Ar ]12iU+ ,1g00 i2.8n250]el.5[4S10 2[8,MT0,E 1AC[S,4[HMP9AX3,E0 PACL7I.19QLC]XBN]5E34BI ]8 U1A D .. TA0CARRE 0.66A4OB 6m PO 3 ApSQUARE [,024]R2,54,2 U9h1TF2 0,1[]E5e-O.S7 F 8n7] EMA ( .4oBFMIVWMf 311FBLEaIol11LF A-ClLr 0 OTSD l- ]ASH ETF DpYToSLImTrERNZ -XoLicV C3Au-nC aGEA8Tn3tP DpR9It8e2EER9Oi9de2[3[XC01 E9Nn9 30x45,,E Sg9c,, 4 BR92SS i09 H 01 ECrsr16TOx 69CRIeecER-LDT]] OIRcruOEEE FSCNECeiiCU1DSSHF UpetINS9 4NIOIIts 1EM:QIRITa b UM-M53EMI cIoR3P: PD EIlIa9 LFBYE MeIrP .COTl AP dO-ReGN Rcw) UU2A 2ILIoiR40LP/LAMntS 3CA0O EfhP-3TN23,01/ No AI0E0lLOrsO8eN0L0,906[] RmtNE21MsaEN/E nA030,963tdU/So 01,219[]18o/f1f ECHELLE 6,000 EEECCCHHHEEELLLLLLEEE 666,,,000000000

Jam nut receptacle 4 HOLES M3 4 HOLES M3 THRU ALL THRU ALL 33.9 33.9 Plating P/N P/N available for coding A for coding B Part number Nickel - ROHS compliant USBF TV 75 N F459 USBF TV 7S B 5 N F459 Olive drab cadmium USBF TV 75 G F459 USBF TV 7S B 5 G F459 Black zinc nickel - ROHS USBF TV 75 ZN F459 USBF TV 7S B 5 ZN F459 compliant Connection side view Main key USB insulation on the left USB insulation A on the right m p Plug Receptacle h e n Coding B - Pins position : o C1 o& d4 i=n Pgo Awe -r P- Rineds &p oblsaictki ownir e:s USB2.0 cable 12 && 43 == SPiogwnearl -- WRehdit &e &b lgacreke wni rweisr eUsS UBS2B.02 c.0a bcaleble l 2 & 3 = Signal - White & green wires USB2.0 cable Sh = Shield Sh = Shield Recommended PCB hole LAYOUT Solder side view Coding A Coding B Panel drilling 108

ROHS COMPLIANT N & B USB 2.0 Receptacle with Self Closing Cap This Self Closing Cap automatically protects the USB Field square S(Sepalalsihn gan lde dvueslt IPPr5oo4f ) fdAtlhau esnsp tgU raeiSnn Brgde c cawoeurapdttotseamerc tpla,e torsoirc j (aUeMlclSyItBLi o-c kClnoe-s2sy.e6 as4r 8eth2 re et myuppoepv)ee, drp prforaotremt co ttifhn tegh reye occeuappr t swaycshlteee.nm e fitrohmer USBF 21 X SCC 36 [1.417] 64.1[2.523] 26.1[1.028] 26.97[1.062] 21.9[.862] 26.7 ol [1.052] n e h Version: USB-A (front and back termination) p m Plating Metallized inserts (EMI) A Part USBF 21B SCC Black coated No (blank insert) number * USBF 21N SCC Nickel plated Yes USBF 21G SCC Olive drab cadmium plated Yes USBF 21ZN SCC Black zinc nickel - ROHS compliant No * The part number includes the receptacle + the self closing cap n N ote: Panel gasket with any of these receptacles: JE18 RJF 21 X SCC, USBBF 21 X SCC, & IEEE1394 RJ45 version USB3.0-A version USB-B version IEEE1394 version (see page 25) (see page 94) (see page 118) (see page 143) 109

Metallic Self Closing Cap (SCC) For USBF TV 2.0 square flange receptacles. This Self Closing cap automatically protects the USBF TV (2.0 - type A) square flange receptacles (MIL-DTL-38999 type), protecting your system from dust and water projection. A spring automatically closes the upper part of the cap when the USB plug is removed from the receptacle. 40 Sealing level [ 1,5748 ] IP67 4 ] 5 1 29, 1,16 [ 1 ] 50 19 ] 47,[ 1,87 66 24,[ 0,9 Ø25,30,996] 7 ] [ 18 708 0, [ 30,9 24,61 [ 0,2165 ] [ 0,969 ] 4- Ø 3,25 [ 0,128 ] 31 [ 1,2205 ] A m IMPORTANT NOTE p Metal Self Closing cap are sold separately (without receptacle). h e n o Green Nickel Black l Sealing level IP67 Plating P/N Part Black - ROHS compliant USBFTVSCCB number Nickel - ROHS compliant USBFTVSCCN Olive drab cadmium USBFTVSCCG Black zinc nickel - ROHS USBFTVSCCZN compliant Remark: also compatible with USB3FTV (type A) & USBBFTV (type B) square flange receptacles: USB3FTVXX (see page 95) USBBFTV2XX (see page 119) n P anel gasket for square flange receptacle (thickness: 0,8 mm [.031]): Part number: JE15 110

ROHS COMPLIANT High Reliability USB 2.0 Cordsets General construction: this is a USB-2.0 cable containing one 28 AWG 90Ω characteristic impedance data pair, two 24 AWG power conductors, overall SFTP shields (SFTP = double shielding, braid and foild), jacketed in black UV resistant Polyurethane HFFR*. Designed for fixed or portable applications in industrial and harsh environments. *HFFR: Halogen Free Flame Retardant. Jacket compound specification: Halogen Free Flame Retardant Polyether-based Polyurethane. Glossy Applications finish. Excellent hydrolysis resistance. High microbial resistance. UV n Robotics resistant. High flexibility. n Motion control n Railways nnn CBInaNdtCtue smltfriaeiacldlh p icnrooemcsemssu nication fo(wr icthaobDuleat taUalsSo nBe p olungly) DELC ERCESTIRSTIACNACLE CHARACT94E ROIhSmTsI/CKmS @ 20°C IMPEDANCE 90 +/- 13 Ohms 1-400 MHz PHYSICAL CHARACTERISTICS ATTENUATION DATA CONDUCTORS bare copper, 7/0.12 mm nom (28 AWG) 1 KHZ 8 db/100m max. DATA INSULATION 0.9 mm nom 4 MHZ 15,6 db/100m max. COLOR DATA PAIR Green & white 24 MHZ 38 db/100m max. POWER CONDUCTORS Tinned copper, 7/0.2 mm (24 AWG) 96 MHZ 76 db/100m max. POWER INSULATION 1.1 mm nom 200 MHZ 128 db/100m max. COLOR POWER WIRE Red & Black 400 MHZ 232 db/100m max. SHIELDS Foil: poviding 100% coverage, in con- tact with tinned copper drain wire and ol an overall braid providing 65% nom. n coverage made of 16x5/0.1 mm tinned CAPACITANCE 2X28 54pF/m nom. @ 1KHz e copper strands AWG h p JACKET PU compound CAPACITANCE 2.0 pF/m max. @ 1KHz m COLOR JACKET Black UNBALANCE (wire to ground) A WEIGHT 26 lbs/mft (38 kg/km) DIELECTRIC STRENGTH VAC/1 min - 500 V/Min OUTSIDE DIAM. 0.20 inch (5.1 mm nom. +/- 0.15) RESISTANCE 2% max. @ 20°C UNBALANCE MIN BEND RADIUS 45.9 mm (9x O. D.) (During installation) VELOCITY OF 65% min. 68% max. PROPAGATION MIN BEND RADIUS 25.5mm (5 x O.D.) (During operation) CORDSETS WITH A USB A PLUG OVERMOLDED TEMPERATURE installation Plus 60°C, minus 5°C ON EACH END (UNDER USB SPECIFATION ≤ 5M) TEMPERATURE operational Plus 85°C, minus 40°C Length (m/ft) Part number 0.5 m / 1,64 ft USB2 AA 050 PU HFFR CORDSETS WITH A USB A PLUG OVERMOLDED ON EACH END (OUT OF USB SPECIFICATION > 5 M) 1 m / 3.28 ft USB2 AA 100 PU HFFR Length (m/ft) Part number 1.50 m / 4.92 ft USB2 AA 150 PU HFFR 6 m / 19,68 ft USB2 AA 600 PU HFFR 2 m / 6.56 ft USB2 AA 200 PU HFFR 7 m / 22.96 ft USB2 AA 700 PU HFFR 2.50 m / 8.2 ft USB2 AA 250 PU HFFR 8 m / 26.24 ft USB2 AA 800 PU HFFR 3 m / 9.84 ft USB2 AA 300 PU HFFR 9 m / 29.52 ft USB2 AA 900 PU HFFR 3.50 m / 11.48 ft USB2 AA 350 PU HFFR 10 m / 32.80 ft USB2 AA 1000 PU HFFR 4 m / 13.12 ft USB2 AA 400 PU HFFR 4.5 m / 14.76 ft USB2 AA 450 PU HFFR REEL OF DRUM (WITHOUT USB PLUG ON ENDS) 5 m / 16.40 ft USB2 AA 500 PU HFFR Length PN 300 m / ~ 984 ft 190-040567-00 111

ROHS COMPLIANT N & BZ USBF SC Quick release series This product offers a new coupling solution, particurlarly for applications requiring quick disconnect. The system consists of a circular spring within in the receptacle keeping the plug mated, and creating an internal coupling mechanism. Main characteristics n Sealed against fluids and dusts (IP67) n Shock, vibration and traction resistant n No cabling operation in field and no tools required n Improved EMI protection n Mating cycles: 500 n Mating force after 500 cycles: 40 N n Unmating force after 500 cycles: 55 N Environmental protection Applications n Sealing (when mated): IP67 (temporary immersion) n Embedded computers n Salt spray: 48 h with nickel plating n D ata acquisition and transmission in harsh > 500 h with olive drab cadmium environment n Fire retardant / Low smoke: UL94 V0 and NF F 16 101 & 16 102 n Railways n Vibrations: 10 – 500 Hz, 10 g, 3 axes: no discontinuity > 1micro s n Battelfield communication systems n Shocks: IK06 ►weight of 250 g drop from 40 cm [15.75 in] onto connectors n Navy systems (mated pair) n Humidity: 21 days, 43°C, 98% humidity Data transmission n Temperature range: - 40°C / +85°C USB specification 2.0 A Data rate: up to 480 Mb/s for high speed USB m p h e n Part number code o Series USBF SC 2 1 G l USBF spring loaded Shell Type 6: plug 1: inline receptacle 2: square flange receptacle 7: jam nut receptacle Back terminations (receptacles only) 1: female USB-A 2: solder (4 tinned holes) - Not available for shell type "1" (inline receptacle) Shells material & finish N: aluminium shell - nickel plating - ROHS compliant G: aluminium shell - olive drab cadmium plating BZ: marine bronze shell - ROHS compliant ZN: aluminium shell - black zinc nickel plating - ROHS compliant Back terminations USBFSC Back terminations receptacles Type 1: female USB-A Type 2: solder (4 tinned holes) 112

Plug n Shell type 6 USBFSC 6 X Receptacles n Square flange receptacle 4 mounting holes: shell type 2 USBFSC 21 X l o n n Jam nut receptacle hexagonal nut mounting: shell type 7 e h p m A USBFSC 71 X n Inline receptacle: shell type 1 USBFSC 11 X 113

ROHS COMPLIANT N USBBF TV (USB-B) USB connection system for harsh environment USB Field allows you to use a standard USB 2.0 connection in harsh environment: • sealed against fluids and dusts (IP68) • shock, vibration and traction resistant • no cabling operation in field and no tools required • improved EMI protection • Tri Start thread coupling mechanism (MIL-DTL-38999 series III type) with anti-decoupling device • plug retention in the receptacle: 100N in the axis • mating cycles: 500 minimum • temperature range: -40°C/+85°C Applications Main characteristics n Embedded Computers n Sealed against fluids and dusts (IP68) n D ata Acquisition and transmission in harsh n Shock, vibration and traction resistant environment n No cabling operation in field and no tools required n Railways n Improved EMI protection n Battelfield Communication Systems n Tri Start Thread coupling mechanism (MIL-DTL-38999 series III type) with n Navy Systems anti-decoupling device - Shell size 15 n Plug retention in the receptacle: 100N in the axis n Mating cycles: 500 minimum Data transmission Environmental protection USB specification 2.0 n Sealed against fluids and dusts (IP68) Data rate: up to 480 Mb/s for high speed USB n Temperature range: - 40°C / +85°C A m Part number code p Series USBBF TV 2 1 G h USBB Field TV e n Shell type o l 6: plug 2: square flange receptacle 2PE: square flange receptacle with metal backshell (type 1) & with metal backshell + plastic gland (type 2) 2PEM: square flange receptacle metal gland (only for soldering back termination type 2) 7: jam nut receptacle 7PE: jam nut receptacle with metal backshell (type 1) & with metal backshell + plastic gland (type 2) 7PEM: jam nut receptacle metal gland (only for soldering back termination type 2) Back terminations (receptacles only) 1: female USB-A 2: solder (4 tinned holes) Shells material & finish N: aluminium shell - nickel plating - ROHS compliant G: aluminium shell - olive drab cadmium plating ZN: aluminium shell - black zinc nickel plating - ROHS compliant Examples: - Plug-cadmium plating: USBBF TV 6G - Square flange receptacle-USB-A back termination - cadmium plating: USBBF TV 21G - Jam nut receptacle, solder termination -nickel plating: USBBF TV 72N Back terminations Hole n°1 Hole n°4 Type 1: female USB-A Type 2: solder (4 tinned holes) Grounding 114

Plug n Shell type 6 USBBFTV 6 X Panel Drilling Receptacles n Shell type 2 - Square flange receptacle Panel Drilling USBBFTV 2 XX n Shell type 7 - Jam nut receptacle l o n e h p m A Panel Drilling USBBFTV 7 XX n «2PEM» and «7PEM» shells with backshell to protect back termination from dust, shocks and vibration. 86.9 [3.422] 72.7 [2.862] 8686.9.9 [ [33..442222]] 72.7 [2.862] Backshell used with back termination type 1: Backshell used with Backshell used with back termination type 1: Backshell used with USB A receptacle (Not sealed) back termination type 2: USB A receptacle (Not sealed) back termination type 2: Solder (Sealed – IP68) Solder (Sealed – IP68) Same panel drilling as USBBFTV 2xx USBBF TV 2PE / 7PE-1 USBBF TV 2PE(M) / 7PE(M)-2 Panel drilling (for type 2 only) 115

Accessories n Metallic caps (same as USB-A version - see page 99) USBF TVC 2 G Connector type 6: plug 2: square flange receptacle 7: jam nut receptacle Shells material & finish N: nickel plating - ROHS compliant G: olive drab cadmium plating ZN: aluminium shell - black zinc nickel plating - ROHS compliant n Panel gasket for square flange receptacle A (thickness: 0,8 mm [.031]): p/n JE15 m p h e n o l 116

N E W USBBF TV Stand off receptacles These receptacles can be soldered directly to your PCB. A compound insures a transversal sealing and good performance in high-vibration environments. The shell of those receptacles are in the “Stand Off” style. They can be connected with USBBF TV series plugs. Square flange receptacle 4 Holes M3 Thru all l Plating Part number o n Part Nickel - ROHS compliant USBBF TV 2 5 N F459 e number h Olive drab cadmium USBBF TV 2 5 G F459 p m Black Zinc Nickel - ROHS compliant USBBF TV 2 5 ZN F459 A Recommended PCB hole LAYOUT Panel drilling Solder side view 117

Jam nut receptacle Plating Part number Part Nickel - ROHS compliant USBBF TV 7 5 N F459 number Olive drab cadmium USBBF TV 7 5 G F459 Black Zinc Nickel - ROHS compliant USBBF TV 7 5 ZN F459 Recommended PCB hole LAYOUT Panel drilling Solder side view A m p h e n o l 118

ROHS COMPLIANT N & BZ USBBF TV Transversally sealed receptacles With USB Field, you can insert a standard USB 2.0 cordset into a metallic plug which will protect it from shocks, dust and fluids. No hazardous on-field cabling and grounding! This metallic plug is connected into a receptacle, using a Tri Start Thread coupling mechanism (MIL-DTL-38999 series III type) with anti- decoupling device for high vibrations. Main characteristics n Sealed against fluids and dusts (IP68) n Shock, vibration and traction resistant Applications n No cabling operation in field and no tools required n Embedded computers n Improved EMI protection n Data acquisition and transmission in harsh n Tr i Start Thread coupling mechanism (MIL-DTL-38999 series III type) with environment anti-decoupling device - Shell size 15 n Railways n 2 m echanical coding/polarization possibilities by the user n Battelfield communication systems (receptacle insert rotation) n Navy systems n USBF TV plug retention in the receptacle: 100 N in the axis n Mating cycles: 500 minimum Data transmission Environmental protection USB specification 2.0 n Sealing (when mated): IP68 (temporary immersion) Data rate: up to 480 Mb/s for high speed USB n Salt spray: 48 h with nickel plating > 500 h with olive drab cadmium 1000 h with marine bronze shell n Fire retardant / Low smoke: UL94 V0 and NF F 16 101 & 16 102 n Vibrations: 10 – 500 Hz, 10 g, 3 axes: no discontinuity > 1micro s n Sh ocks: IK06 ► weight of 250 g drop from 40 cm [15.75 in] onto connectors l o (mated pair) n n Humidity: 21 days, 43°C, 98% humidity e n Temperature range: - 40°C / +85°C h p m A Part number code Series USBBF TV 7S 2 G 10 OPEN USBB Field TV Shell type 2S: sealed square flange receptacle 2PES: sealed square flange receptacle + backshell + plastic gland 2PEMS: sealed square flange receptacle + backshell + metal gland 7S: sealed jam nut receptacle 7PES: sealed jam nut receptacle with backshell 7PEMS: sealed jam nut receptacle + backshell + metal gland Back terminations 2: rugged USB cable Shells plating N: nickel G: olive drab cadmium ZN: aluminium shell - black zinc nickel plating - ROHS compliant USB cable length 03: 30 cm [11.81 inches] 05: 50 cm [19.68 inches] 10: 1 meter [39.37 inches] USB cable end A: standard USB-A plug OPEN: open USB cable (no connector) Examples: - Olive drab cadmium jam nut receptacle: USBBF TV 7 XX - Nickel square flange receptacle: USBBF TV 2 XX 119

ROHS N E W COMPLIANT N & B USBB receptacle with Self Closing Cap S(Sepalalsihn gan lde dvueslt IPPr5oo4f ) TrwAUeh SacsiBtespe BpSrr it epnpallgfcru olC gejales oui cs(stM tiorineomIgLmn- asCCot. a-ivc2pea6 dla4l yu8f rt2oco lmtmoys patethesi)ec ,at prhlelreyco eptueprpcotpattiecenlcrge t. spy aothruter oRsyfJ s Ftthieeemld c fsarqopum aw rdheue fsnlta natnhgdee USBBF 21 X SCC 36 [1.417] 64.1[2.523] 26.1[1.028] Amp 26.97[1.062] 21.9[.862] h e 26.7 n [1.052] o l Version: USB-B (front in USB-B and back termination in USB-A) Plating Metallized inserts (EMI) Part number Part Black coated No (blank insert) USBBF 21B SCC number* Nickel plated Yes USBBF 21N SCC Olive drab cadmium plated Yes USBBF 21G SCC Black Zinc Nickel - ROHS plating No USBBF 21ZN SCC * The part number includes the receptacle + the self closing cap n N ote: panel gasket with any of these receptacles, p/n JE18 RJF 21 X SCC, USBF 21 X SCC, & IEEE1394 RJ45 version USB2.0 & 3.0 - A version IEEE1394 version (see page 25) (see pages 94 & 107) (see page 143) 120

Metallic Self Closing Cap (SCC) For USBB square flange receptacles. This Self Closing cap automatically protects the USBB (2.0 - type A) square flange receptacles (MIL-DTL-38999 type), protecting your system from dust and water projection. A spring automatically closes the upper part of the cap when the USB plug is removed from the receptacle. [ 1,547048 ] Sealing level IP67 4 ] 5 1 29, 1,16 [ 1 ] 50 19 ] 47,[ 1,87 66 24,[ 0,9 Ø25,30,996] 7 ] [ 18 708 0, [ 30,9 24,61 [ 0,2165 ] [ 0,969 ] 4- Ø 3,25 [ 0,128 ] 31 [ 1,2205 ] l o n IMPORTANT NOTE e Metal Self Closing cap are sold separately (without receptacle). h p m A Green Nickel Black Plating P/N Part Black - ROHS compliant USBFTVSCCB number Nickel - ROHS compliant USBFTVSCCN Olive drab cadmium USBFTVSCCG Black Zinc Nickel - ROHS USBFTVSCCZN plating Remark: also compatible with USB3FTV (type A) & USBBFTV (type B) square flange receptacles: USB3FTV2XX (see page 95) USBFTV2XX (see page 108) n P anel gasket for square flange receptacle (thickness: 0,8 mm [.031]): Part number: JE15 121

N E W Special USB adaptor For Military & Commercial Aeronautics At the rear of the adaptor, the connection is for connectors type EN3646. Adaptor USB only Plating Coding P/n Part Black anodized N 35608 number Black anodized W 35615 4 HOLES Adaptor USB + Self Closing Cap (SCC) 4 HOLES Plating Coding P/n Part Black anodized N 35616 number Black anodized W 35617 For all options: 10-6 Male contact EN3155 Coding N Coding W Panel drilling 4 HOLES 122

Rugged USB Solutions Cable assemblies l o n e h p m A Table of contents NEW USB-A Field : plastic & neoprene solutions with self closing cap ................................................................................................................ 118 NEW USB-B Field : Plastic shell - Overmolded cordset plug ..................................................................................................................... 121 123

N E W USB-A Field Rugged USB-A plastic & neoprene solutions with Self Closing Cap Amphenol USB-A Field - Plastic & Neoprene versions are rugged USB interconnect solutions fitted to be used in any industrial harsh environment. The Self Closing Cap enclosure enables to protect the USB-A Field receptacle from dust and fluids when the plug or the USB Memory key are unmatted. Main characteristics n Sealing level: • Matted condition with plug or rugged USB Memory Key: IP67 • Receptacle with Self Closing Cap alone : IP54 Applications n Mating cycles: 500 n Access point n Push-pull mating n Telecom equipments n Neoprene shells for plug & USB Keys n Video control n Da ta transmission: USB specification 2.0 n Robotics n Da ta rate: up to 480 Mb/s for high speed USB n Industrial process control n Temperature range: -40°C / +85°C n CNC machines n RoHS compliant n Special machines Plug with soft neoprene shell A m p Part number: h USBAP 6 xxxA e n with USB-A plug o l IP67 when matted on receptacle Part number: USBAP 6 xxx Open L +5cm L +0.164ft Extremity type 0 0 Open or USB-A Meters Feet USBAP6 05 OPEN Open 0.5 1.64 USBAP6 05A USB-A 0.5 1.64 Part USBAP6 10 OPEN Open 1.0 3.28 number USBAP6 10A USB-A 1.0 3.28 USBAP6 15 OPEN OPEN 1.5 4.92 USBAP6 15A USB-A 1.5 4.92 USBAP6 20 OPEN OPEN 2.0 6.56 USBAP6 20A USB-A 2.0 6.56 124

Square flange receptacle IP54 when alone Part number: USBAPSCC 21 Cordset length Cordset length Meters Feet l o USBAPSCC 22 02A 0.2 0.66 n Part e number USBAPSCC 22 03A 0.3 0.98 h p USBAPSCC 22 05A 0.5 1.65 m A USBAPSCC 22 10A 1.0 3.28 125

Jam nut receptacle IP54 when alone Part number: USBAPSCC 71 Cordset length Cordset length Meters Feet Part USBAPSCC 72 02A 0.2 0.66 number USBAPSCC 72 03A 0.3 0.98 USBAPSCC 72 05A 0.5 1.65 USBAPSCC 72 10A 1.0 3.28 A m USB plastic - IP67 cap (for square flange receptacle only) p h e n o l Part number: Cap lanyard fixed by a screw USBAP IP67 CAP (for square flange receptacle only) How to unplug: Locking Shape: Push-up the self-closing cap before removing the USBKey, Plug or IP67 protective cap from the receptacle 126

N E W ROHS COMPLIANT USB-B Field Plastic shell - Overmolded cordset plug IP68 SEALED USB-B CONNECTION SYSTEM • Plastic shells • Thread coupling • Overmolded plug cordset: male sealed USB-B plug to standard USB-A plug • Available cordset lengths: 1m and 2m - For other lengths please contact us • Rear mount jam nut receptacle with 50mm flying lead + 5-way connector back termination. Panel gasket included. • Temperature range: -20°C +80°C Applications n Embedded computers n Data transfer n Numerical control machine Overmolded plug cordset : male sealed USB-B plug, standard USB-A plug. USB 2.0 cable – PVC jacket Length Part number USBBF6100 1000±50mm [39.37±1.97] USBBF6200 2000±50mm [78.74±1.97] l o n e h Receptacle - Female USB-B p m A JWT CONNECTOR – PITCH 2.5MM Part number : JWT 1 = USB1 = RED (AWG 24) USBBF7 JWT 2 = USB2 = WHITE (AWG 28) JWT 3 = USB3 = GREEN (AWG 28) JWT 4 = USB4 = BLACK (AWG 24) JWT 5 = USB Shield Receptacle cap Part number: USBBFC7 127

NOTES .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. A .............................................................................................................................................................................................................................................................................................. m p .............................................................................................................................................................................................................................................................................................. h e n .............................................................................................................................................................................................................................................................................................. o l .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. 128

Rugged USB Solutions Rugged electronics l o n e h p m A Table of contents NEW Reinforced USBF TV Memory Keys ........................................................................................................................................................................................ 130 NEW Reinforced USB amplifier ............................................................................................................................................................................... 131 129

Update ROHS NEW COMPLIANT oct 2015 N Reinforced USB3FTV Memory Keys Derived from MIL-DTL-38999 series III specification • Capacities 16, 32 & 64 GB We provide reinforced USB memory keys available in different capacities. They can be used ONLY with our Amphenol Socapex USBFTV or USB3FTV series receptacles. When mated on the receptacle, the system is IP68 and allows data transmission in harsh environments. Environmental protection n Sealing: IP68 (when mated) n Salt spray: 48 h with nickel plating (ROHS) > 500 h with olive drab cadmium n Vibrations: MIL-STD-810G method 514.5 fig 514.5.C cat 14 n Temperature range: - 40°C / +85°C (MIL-STD-810F) n Data transmission during vibration & temperature tests IMPORTANT NOTE Other features USBFTV memory key to be used n Type: USB3.0 (capacities 16, 32,64 & 128 GB) with USBFTV receptacles (3.0 and 2.0) n Voltage: 5V DC - 500 mA max see page 86 for 3.0 & page 97 for 2.0 Specific features Interface Super-speed USB3.0 compliant; backward compatible with USB2.0 and USB1.1 NEW n Engineering control (Product Change Notice & End of life Policy) 16GB 32GB 64GB n Memory type: MLC (3000 read/write cycles) Speed performance** Read (MB/s) 200 205 200 n Wear Leveling function* Power consumption**: AcWtriivtee (:M 2B6/5s) mA / ldle: 70m4A7 85 80 n MTBF: 1,000,000 hours ** Results may vary from flash configurations or host system settings. Custom design Amphenol can also study the integration of electronic selected by a customer. In order to do so, we need to receive a sample of the USB memory stick so we can study A its integration into our existing design or adapt it. m Please send your requests to contact@usbfield.com p h e n Note: our rugged memory keys are sold under standard o electronic manufacturer configuration for data storage. l If, for your own usage, you need to re-configurate the electronic (under Linux for example), it will be under customer responsibility. Amphenol is not responsible for any wrong doing or misguided use of the product by its customers. Under request, we can provide you with electronic Memory size for 16, 32 & 64 GB capacities manufacturer details so you can check if their specific configuration will work with the electronic (please specify memory capacity). A male/Femelle USB cordset is included with each memory key *Wear-Leveling: Flash memory can be erased a limited number of times. In a typical application, and especially if a file system is used, specific pages are constantly updated (e.g., the page that contains the FAT, registry, etc.). Without any special handling, these pages would wear out more rapidly than other pages, reducing the lifetime of the entire flash. To overcome this inherent deficiency, USB- Disk Module (UDM) uses wear-leveling algorithm. This wear-leveling algorithm ensures that consecutive writes of a specific sector are not written physically to the same page in the flash. This distributes flash media usage evenly across all pages, thereby maximizing flash lifetime. The wear-leveling mechanism provides write/erase cycles for reliable data storage over an extended period. Definition of part number USB3FTV KEY 6 A 64 N CAP APA Coding position: Capacity for USB3FTV KEY: Plating CAP: with cap For USB3.0 version A: coding A 16 / 32 / 64 / 128 N: nickel Blank: without cap G: olive drab cadmium B: coding B ZN: Black Zinc Nickel Nota: USB3.0 is compatible ! Coding position must Nota: other capacity, Nota: please check the with USB2.0 please consult us at plating of your USBFTV be the same than the contact@usbfield.com receptacle. receptacle Example: - USB3.0 version, coding B, capacity of 64GB, olive drab cadmium plating, with cap: p/n is USB3FTVKEY6 B 64 G CAP APA 130

ROHS N E W COMPLIANT N Reinforced USB Amplifier We provide USB amplifier if your need exceeds 5 meters up to 10 meters (16.40 up to 32.80 ft]. This product is subject to custom design. For more information, please consult us. Jam nut receptacle Ampli with cable reinforced PU jacket open l o n e h USB amplifier selection guide p m USB amplifier selection guide Define your own solution by selecting options in the scheme b elow A Define your own solution in selecting options in the scheme below L1 + L2 < 9.6 meters L1 < 4.8 meters L2 < 4.8 meters USB device : Customer L1 = to be specified L2 = to be specified Keyboard, signal mouse, source USB memory stick,… Type of USB cable end « open » (no connector) Type of USB cable end USB amplifier side - Type of plug ? or USBFTV o6rx s ptalungd a?r odr U USSBB-AFT pVlu rge c eptacle? o«r o spteann d»a (rndo U cSoBn-nAe cptlourg) -Type of re ceptacle : Sorta UnSdaBrFdT VU6SxB -(Apl upglu)g o io Y-«o -f r rre UPT G« sSryU« oZBp/» SFtNN e eNTBo Vc»oF»olt ipTfB vi vNlV lpuaedi6lgcc arxkckat a eibZpnpl i lgnc u?c ag? dN ?ic kel -S«Y o -o rre qTP G« sury« oZap/» NtN re eNe o »c o»ol otiBf vir vNl pa edijclcaa rkckam tZaeibnipl n gnc c? ua N dti c ?k el o -«Y o -ir rfe PT G«U sry «S Zop/» BNtN eF eN oT » co»olV tiBf v ip vNla pleduiclc arkgcka tZaeibnipnl gcc ? aN ? d ic kel «Y-o -oif rre TPUG« sry S« Z opB/» NtN Fe eN To» cVo »olBtif vil avN p cedilk6ca r xckZataieibn nplpc g c lNu? ai?g cd k e l -si---f o UTTBTFSYYlSdyyreeeaqaBppmesscuFn kreeaT//aess rVoolvdhNNee fef e oo corUbrl aslre a Sabr?c ceBjll elkeacy-pe mA ttptseea t eonrrcarmmluael etcsii nnl:doe? aa l d(tt oiieoonrnnely )d?? f coarb l e Receptacle cap ? - Type of plating ? For any special configuration out of this definition, Yes / No « G » oliv drab cad thanks to consult us at contact@usbfield.com or « N » Nickel or « ZN » Black Zinc Nickel - Protective cap ? Yes / No 131

NOTES .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. A .............................................................................................................................................................................................................................................................................................. m p .............................................................................................................................................................................................................................................................................................. h e n .............................................................................................................................................................................................................................................................................................. o l .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. 132

Rugged ATEX Zone 2 solutions l o n e h p m A Table of contents RJFTVX, USBFTVX, RJ11FTVX ................................................................................................................................................................................................. 134 133

RJFTVX, USBFTVX, RJ11FTVX RJ45, USB, RJ11/12 explosion proof solutions for Zone 2 Amphenol Atex Field Bus range is designed for device group II category 3G. According to EN60079-15 it may be operated within zone 2 and class I, Division 2, as low power non sparking connectors. RJFTVX • Rugged and sealed RJ45 connector RJFTVX allows you to use an Ethernet Class D / Cat. 5e connection for 10 BaseT, 100 BaseTx or 1000 BaseT networks in ATEX zone 2 environments. With the patented RJStop system you can use a standard RJ45 cordset in a metallic plug which will protect it from shocks, dust and fluids. RJFTVX features the same main characteristics than RJFTV series (see page 26). Plug Characteristics n Ex marking II3G ExnAIIT6 X n Operating -40°C / +60°C temperature range n Voltage 60 Veff max n Power 20 W max A m n Outside cable diameter 6mm to 12mm p h n Sealing IP68 e n n Data transmission 10 BaseT, 100 BaseTX & ol Plating Plug IP68 metallic cap 1000 BaseT networks. Cat. Part Nickel RJFTVX6MN RJFTVC6N 5e per TIA/EIA 568B & number Class D per ISO/IEC 11801 Olive drab cadmium RJFTVX6MG RJFTVC6G Black Zinc Nickel RJFTVX6MZN RJFTVC6ZN Square flange receptacle Plating Receptacle, RJ45 back termination, coding A IP68 metallic cap Part Nickel RJFTVX2SA1N RJFTVC2N number Olive drab cadmium RJFTVX2SA1G RJFTVC2G Black Zinc Nickel RJFTVX2SA1ZN RJFTVC2ZN 134

Jam nut receptacle Plating Receptacle, RJ45 back termination, coding A IP68 metallic cap Part Nickel RJFTVX7SA1N RJFTVC7N number Olive drab cadmium RJFTVX7SA1G RJFTVC7G Black Zinc Nickel RJFTVX7SA1ZN RJFTVC7ZN REMARK: As receptacles are compounded (IP68 transversally sealing), coding position has to be specified in the part number : A (standard), B, C or D Receptacles can be provided with RJ45 cordsets. There are 4 standard lengths as described hereunder (with coding "A"): Nickel plating Olive drab cadmium plating Black Zinc Nickel plating RJ45 cordset length (meters) RJFTVX2SA2N03100BTX RJFTVX2SA2G03100BTX RJFTVX2SA2ZN03100BTX 0.3 Part RJFTVX2SA2N05100BTX RJFTVX2SA2G05100BTX RJFTVX2SA2ZN05100BTX 0.5 number RJFTVX2SA2N10100BTX RJFTVX2SA2G10100BTX RJFTVX2SA2ZN10100BTX 1.0 RJFTVX2SA2N15100BTX RJFTVX2SA2G15100BTX RJFTVX2SA2ZN15100BTX 1.5 Part number code l Series RJ Field TV RJF TVX 7S A 2 N 05 100BTX o n Shell Type e 2S: Square flange receptacle h 7S: Jam nut receptacle p 6M: Plug m Coding (for receptacles only) A "A" (Standard) or "B", “C”, “D” Back Terminations (for receptacles only) 1: Female RJ45 2: RJ45 cordset Shell Material and Finish: N: Nickel G: Olive drab cadmium ZN: Black Zinc Nickel Cordset length (for receptacles with “2” back termination only) 03 100BTX:30 cm [11.81 inches] 10 100 BTX:1 meter [39.37 inches] 05 100 BTX:50 cm [19.68 inches] 15 100BTX: 1,5 meters [59.04 inches] Assembly instructions for the plug Assembling of the plug. 4 codings possibilities ASSEMBLY + CODING (defined by the customer during the assembling). «CLIC» ! Coding A Coding B Coding C Coding D Plug «CLIC» ! Main key RecIMepPtaOcRleTANT NOTE: to remove the insert use the n I nsert removal tool for plug P/N: RJF ODE INSERTS CODING Connection side view 135

USBFTVX • Rugged and sealed USB connector With USBFTVX, you can insert a standard USB 2.0 cordset into a metallic plug which will protect it from shocks, dust and fluids. This range is fitted to be used in Atex zone 2 environments. This metallic plug is connected into a receptacle, using a Tri Start thread coupling mechanism (MIL-DTL-38999 series III type) with anti- decoupling device for high vibrations. USBFTVX features the same main characteristics than USBFTV series (see page 76). Characteristics n Ex marking II3G ExnAIIT6 X n Outside cable diameter 4mm to 6mm n Operating temperature range -40°C / +70°C n Sealing IP68 n Voltage 60 Veff max n Data transmission USB 2.0 up to 480 Mb/s n Power 20 W max Plug Plating Plug IP68 metallic cap Part Nickel USBFTVX6N USBFTVC6N number Olive drab USBFTVX6G USBFTVC6G cadmium Black Zinc USBFTVX6ZN USBFTVC6ZN A Nickel m p h e n Square flange receptacle o l Cable end Type "A" (Standard USB "A" Plug) Cable end Type "OPEN" (No connector) Jam nut receptacle Cable end Type "A" (Standard USB "A" Plug) Cable end Type "OPEN" (No connector) 136

Receptacle Connection side view Main key REMARK: as the receptacles are compounded (IP68 trans- versally sealing), the coding position has to be specified in the part number: A (standard), or B USB insulation USB insulation on the left on the right Connection side view of the receptacle Coding A Coding B Part number code Series USB Field TV USBF TVX 2S A 2 N 03 A Shell Type 2S: square flange receptacle 7S: jam nut receptacle Coding: “A" (Standard) or "B" Back Terminations 2: rugged USB cable Shells Plating N: Nickel G: Olive drab cadmium plating USB cable length 03: 30 cm [11.81 inches] 05: 50 cm [19.68 inches] 10: 1 meter [39.37 inches] USB cable end A: Standard USB-A plug OPEN: Open cable (no connector) CAPS for receptacles : Plating Cap for square flange receptacle Cap for jam nut receptacle Part Nickel USBFTVC2N USBFTVC7N number Olive drab cadmium USBFTVC2G USBFTVC7G Black Zinc Nickel USBFTVC2ZN USBFTVC7ZN Assembly instructions of the plug l o n 1. Only if you need a full sealing (IP68): Install the white sticker around the e plug, covering the 4 little holes of the overmolding h p 2. Insert the black O Ring around the front face of the USB A plug. This O m Ring will ensure connection sealing A 3. Insert the USB cordset into the metallic backshell 1 2 4. Insert the retention spacer laterally to the cable (this spacer is soft, in order to adapt to different shapes of overmolding) and slide the over- molding of the USB-A plug into this retention spacer 5. Insert the friction ring laterally to the cable 6. Choose the right coding (2 positions) and insert the USB-A plug into the protective plug. Note at this step, the main key is used for polarization. 3 4 Plug Connection side view Main key USB insulation USB insulation on the left on the right 5 6 Coding A Coding B 7. Screw the backshell on the plug body. A wrench can be necessary to fully tighten it, and the connection to the receptacle can help. IMPORTANT NOTE The connection sealing is not done by the black retention spacer (which 7a 7b is sloted), but by the front face ORing (fig.2) IMPORTANT NOTE To remove the insert use the insert removal tool for plug. P/N: USBF ODE 137

RJ11FTVX • Rugged and sealed RJ11/12 connector RJ11FTVX allows you to use a standard phone RJ11/RJ12 connection in Atex zone 2 environments. With the patented RJStop® system you can use a standard RJ11 / RJ12 cordset in a metallic plug which will protect it from shocks, dust and fluids. Characteristics n Ex marking II3G ExnAIIT6 X n Operating temperature range -40°C / +60°C n Voltage 60 Veff max n Power 20 W max n Outside cable diameter 4mm to 5.5mm n Sealing IP68 n Coupling mechanism Tri Star thread with anti-decoupling device (MIL-DTL-38999 series III) n Mating cycles 500 min n Salt spray 48h with nickel plating / 500 h with oliv drab cadmium plating n Coding 4 mechanical user-defined coding / Polarization settings (insert rotation) n Fire retardant / Low smoke UL94 V0 and NF16 101 & 16 102 n R11 cordset retention in the plug 100 N in the Axis Plug A m p h e n o l Plating Plug Cap Part Nickel RJ11FTVX6MN RJ11FTVC6N number Olive drab cadmium RJ11FTVX6MG RJ11FTVC6G Black Zinc Nickel RJ11FTVX6MZN RJ11FTVC6ZN 138

Square flange receptacle Plating Receptacle - Female RJ11 back termination - Coding A Receptacle cap Part Nickel RJ11FTVX2SA1N RJ11FTVC2N number Olive drab cadmium RJ11FTVX2SA1G RJ11FTVC2G Black Zinc Nickel RJ11FTVX2SA1ZN RJ11FTVC2ZN Jam nut receptacle l o n e h p m A j INSTRUCTIONS D'ASSEMBLAGE Amphenol ASSEMBLY INSTRUCTIONS socapex FIGURE 1 www.RJField.com Diamètre de câble acceptable : 4 à 5.5mm Outside cable diameter : 4 to 5.5mm A Pnaurmt ber ONilcivkee ldrPalba tciandgmium Receptacle - FemaleR RRJJJ1111X - 40831 - Rev 11FF bTTaVVcXXk7 7tSeSArAm11NiGnation - Coding A ReRRcJeJ1p111taFFcTTlVeV CCc7a7pNG V Black Zinc Nickel RJ11FTFTVX7SA1ZN RJ11FTVC7ZN RJ11 REMARK: As receptacles are compounded (IP68 transversally sealing), coding position has to be specified in the part number : A (standard), B, C or D Receptacle (connection side views) Plug lxm oeo kNOTICE D'UTILISATION OUTIL DE DEMONTAGE Amphen INSTRUCTION FOR REMOVAL TOOL USEsocapFIGURE 2www.RJField.c lPERCAGE PANNEAU PANEL DRILLING FIGURE 3 1EMBASE A FIXATION PAR ECROU HEXAGONALEMBASE A COLLERETTE CARREE3JAM NUT RECEPTACLESQUARE FLANGE RECEPTACLE9m. TEST DE TENSION DE TENUE A 500V PENDANT 1 MINUTE DIELECTRIC WITHSTANDING VOLTAGE TEST OF 500V DURING 1 MINUTE. PCORRECT

NOTES .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. A .............................................................................................................................................................................................................................................................................................. m p .............................................................................................................................................................................................................................................................................................. h e n .............................................................................................................................................................................................................................................................................................. o l .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. 140

Other rugged solutions Field installable l o n e h p m A Table of contents FWFTV ...................................................................................................................................................................................................................................... 142 Self Closing Cap for IEEE1394 receptacles .......................................................................................................................................... 145 RJ11F ................................................................................................................................................................................................................ 146 NEW Special RJ11 Military & Commercial Aeronautics ............................................................................................................................. 148 MTRJF TV - Fiber optic solution............................................................................................................................................................... 150 LC Field - Fiber optic solution .................................................................................................................................................................. 152 141

ROHS COMPLIANT N FWF TV IEEE 1394A Connection System for Harsh Environments With FW Field, you can insert a standard IEEE1394A cordset into a metallic plug which will protect it from shocks, dust and fluids. No hazardous on-field cabling and grounding! This metallic plug is connected into a receptacle, using a Tri Start Thread coupling mechanism (MIL-DTL-38999 series III type) with anti- decoupling device for high vibrations. Main characteristics n No assembly tools required n Sealed against fluids and dusts (IP68) n No time-consuming in-field cabling operation necessary n Tr i-start thread coupling mechanism (MIL-DTL-38999 series III type) with anti-decoupling device Applications n FW plug retention in the receptacle: 100 N in the axis n Embedded Computers n Mating cycles: 500 minimum n Video n Improved EMI protection n Railways n Battelfield Communication Systems Environmental protection n Naval & Shipboard Systems n Sealing (mated): IP68 (Temporary immersion - 1 meter up to 30 minutes) n Robotics & Automation n Salt Spray: 48 h with Nickel plating n Process Control > 500 h with Olive Drab Cadmium n Rugged Communications n Fire Retardant / Low Smoke: UL94 V0 and NF F 16 101 & 16 102 n Vibrations: 10 – 500 Hz, 10 g, 3 axes: no discontinuity > 1micro s n Sh ocks: IK06: weight of 250 g drop from 40 cm [15.75 in] onto connectors Data transmission (mated pair) IEEE 1394a-2000 n Humidity: 21 days, 43°C, 98% humidity 400 Mbits/second over 4.5 meters n Temperature Range: - 40°C / +85°C A m p h e n o Part number code l Series FWF TV 2 1 G IEEE1394 Field TV Shell Type 6: Plug 2: Square Flange Receptacle 2PE: Square flange receptacle with metal backshell (type 1) & with metal backshell + plastic gland (type 2) 7: Jam Nut Receptacle 7PE: Jam nut receptacle with metal backshell (type 1) & with metal backshell + plastic gland (type 2) Back Terminations (Receptacles only) 1: IEEE 1394 receptacle 2: Solder Board (6 tinned holes) Shell Plating N: Nickel - ROHS Compliant G: Olive Drab Cadmium Examples: - Olive Drab Cadmium Plug: FWF TV 6G - Olive Drab Cadmium Square Flange Receptacle, IEEE 1394 front & back: FWF TV 21G - Olive Drab Cadmium Jam Nut Receptacle, IEEE 1394 front and back: FWF TV 71G - Nickel Jam Nut Receptacle, solder board termination: FWF TV 72N 142

Plug n Shell type 6 FWF TV 6 X Receptacles n Square flange receptacle 4 mounting holes: Shell type 2 FWF TV 2 XX Panel Drilling 33.8 [1.332] n Jam nut receptacle Hexagonal Nut mounting: Shell type 7 l o FWF TV 7 XX Panel Drilling n e h n Receptacles with backshell: 8866.9.9 [3[3.4.2422]2] 77[3.020] p m Shell type 2PE and 7PE A Backshell used with IEEE 1394 Backshell used with IEEE 1394 BacBkaschkeslhl uelsl euds ewdi twhi tPhC PBCB Receptacle with back-termination - (Type 1) Receptacle with back-termination - (Type 1) RReecceeptpatcalec wleit hb abacckk-- tteermrminiantiaonti o- (nTy -p e( 2T)ype 2) Non sealed version Non sealed version SeaSleeadl evde rvseiorsnio -n I P–6 I7P67 Same panel drilling as FWFTV 2xx FWF TV 2PE & 7PE Type 1 FWF TV 2PE & 7PE Type 2 Panel Drilling (for type 2 only) Back terminations View of the PCB Type 2 Type 1: IEEE 1394 Receptacle Type 2: Solder 6 Tinned holes for soldering version - with 6 tinned holes for Type 1: IEEE 1394 Receptacle Type 2: Solder solder termination 6 Tinned holes for soldering 143

Assembly instructions Can be used with most IEEE 1394 cordset brands: No tools required! Plug Assembly 1. If a fully sealed (IP68) assembly is required: Install the white tape around the plug to cover the 4 holes of the overmolding. If there are no holes omit this step. 1 2. Insert the black O Ring around the front face of the IEEE 1394 plug. This O Ring will ensure the seal. 2 3. Insert the IEEE 1394 cordset into the metallic backshell. 4. Insert the retention spacer laterally onto the cable (this spacer is 3 4 soft so as to adapt to various overmolding styles) and slide the IEEE 1394 plug into this retention spacer. 5. Insert the friction ring laterally onto the cable cordset. 6. Insert the IEEE 1394 plug into the metallic circular shell. Note at this step that the main key is used for polarization. 5 6 7. Screw the backshell on the plug body. A spanner may be required to fully close the backshell to the circular shell. Important Note: The sealing of the connector is not done by the black retention spacers which are slotted, but rather by the front face O-Ring (Fig 2). 7a 7b Receptacle assembly A To Solder your cable onto the PCB: m 1. Attach the 2 metallized plastic inserts around the PCB (Fig 1a & 1a p 1b). h 2. Insert the IEEE 1394 module from the rear of the connector. e n 2 o l 1b Removing Modules 1. Insert the removal tool FWF ODE from the front 1 2. Push the module back with thumb. 2 Accessories n Metallic Caps FWF TVC 2 G Connector Type 6: Plug 2: Square Flange Receptacle 7: Jam Nut Receptacle Shell plating N: Nickel - ROHS Compliant G: Olive Drab Cadmium n P anel Gasket for square flange receptacle (Thickness: 0,8 mm [.031]): JE15 n Receptacle Insert removal tool: FWF ODE 144

ROHS COMPLIANT N & B IEEE1394 Receptacle with Self Closing Cap This Self Closing Cap automatically protects the IEEE1394 square flange receptacles (MIL-C-26482 type), protecting your system from dust and water projections. A spring automatically closes the upper part of the cap when the IEEE1394 plug, or IEEE1394 cordset, are removed from the receptacle. FWF 21 X SCC 36 [1.417] 64.1[2.523] 26.1[1.028] 26.97[1.062] 21.9[.862] l o n 26.7 [1.052] e h p Version IEEE1394 m Plating Metallized inserts (EMI) A Part FWF 21B SCC Black coated No (blank insert) number * FWF 21N SCC Nickel plated Yes FWF 21G SCC Olive drab cadmium plated Yes * The part number includes the receptacle + the self closing cap n N ote: Panel gasket with any of these receptacles: JE18 RJF 21 X SCC, USBF 21 X SCC, USBBF 21 X SCC RJ45 version USB2.0 & 3.0 - A version USB-B version (see page 25) (see pages 94 & 107) (see page 118) 145

ROHS COMPLIANT N & B RJ11F Rugged RJ11/RJ12 Connection System for Harsh Environment RJ11Field allows you to use a standard phone RJ11 / RJ12 connection in harsh environments. With the patented RJStop® system you can use a standard RJ11 / RJ12 cordset in a metallic plug which will protect it from shocks, dust and fluids. No hazardous on-field cabling! Main characteristics n Ba yonet coupling (“Audible & Visual” coupling signal ) n Ro bust metallic shells based on MIL-DTL-26482 H Applications n 4 m echanical user-defined coding / Polarization settings (insert rotation) n Industrial applications n RJ 11 cordset retention in the plug: 100 N in the axis n Battlefield communication n Mating cycles: 500 min Environmental Protection n Sealing: IP68 n Salt Spray: 48 h with Nickel plating > 96 h with black coating > 500 h with Oliv Drab Cadmium n Fire Retardant / Low Smoke: UL94 V0 and NF F 16 101 & 16 102 n Vibrations: 10 – 500 Hz, 10 g, 3 axes: no discontinuity > 10 nano s. n Sh ocks: IK06: weight of 250 g drop from 40 cm [15.75 in] onto connectors (mated pair) n Humidity: 21 days, 43°C, 98% humidity n Temperature Range: - 40°C / +85°C Part Number Code Series RJ11F 2 2 B RJ11Field A Shell Type m 6: Plug, Plastic Gland p 2: Square Flange Receptacle h 7: Jam Nut Receptacle e n Back Terminations (For Receptacles only) o 1: Female RJ11 l 2: Solder (6 tinned holes) Shell Finishes B: Black Coating - ROHS Compliant N: Nickel - ROHS Compliant G: Olive Drab Cadmium ZN: Black Zinc Nickel - ROHS Compliant Examples: - Black Plug: RJ11F 6 B - Black square flange receptacle, Female RJ11 Back termination: RJ11F 2 1 B - Nickel Jam Nut Receptacle, solder termination: RJ11F 72 N n Metallic cap RJ11FC 2 B Connector Type 6: Plug Receptacle cap 2: Square Flange Receptacle 7: Jam Nut Receptacle Finishes B: Black Coating - ROHS Compliant N: Nickel - ROHS Compliant G: Olive Drab Cadmium ZN: Black Zinc Nickel - ROHS Compliant n P anel gasket for square flange « 2 » thickness: 0,6 mm n Insert removal tool for receptacle and plug P/N: JE 14 P/N = RJ11F ODE 146

Plug n Shell type 6 with Plastic Gland RJ11F 6 X Receptacles n S quare flange receptacle, 4 mounting holes: shell type 2 Panel Drilling Ø22,51 [Ø0.886] FRONT PANEL MOUNTING Ø25 [Ø0.984] REAR PANEL MOUNTING RJ11F 2 XX RJ11 receptacle Cable Wiring 6 1 5 2 4 3 3 4 2 5 1 6 n J am nut receptacle, Hexagonal Nut mounting: Shell type 7 l o n e h p m A RJ11F 7 XX Back terminations Type 1: Female RJ11 / RJ12 Type 2: Solder 6 Tinned through holes to solder your cable Type 1: Female RJ11 / RJ12 Type 2: Solder 6 tinned through holes to solder your cable Assembly instructions Easy and Safe: No field cabling tools required 1. Pass the RJ11 / RJ12 plug through the plastic gland 2. Lateraly slide the insert on the cable 3. Fix the RJ11 / RJ12 plug in the insert , pushing on the lever 4. Insert in the metallic housing 5. Tighten the plastic gland INSERTS CODING Connection side views 147

N E W Special RJ11 adaptor For Military & Commercial Aeronautics RJ11 adaptor only Coding 35639 Y Part 35641 W number 35643 Z 35645 N RJ11 adaptor + Self Closing Cap A m p h e n o l Coding 35623 N Part 35640 Y number 35642 W 35644 Z 148

For all options: Panel Drilling 12-8 Male contact / EN3155 Coding N Coding W Coding Y Coding Z l o n e h p m A 149

ROHS COMPLIANT N MTRJF TV Fiber optic solution - Transform your MTRJ patchcord into an Environmental Connector With MTRJFTV you can use a standard MTRJ patchcord in a metallic plug which will protect it from shocks, dust and fluids. No hazardous on-field cabling! The MTRJ Field offers an easy system to upgrade from a standard to an environmental MTRJ. • Sealed against fluids and dust (IP68) • Shock, Vibration proof, • No cabling operation in field and no tools required for installation Applications Mechanical characteristics n Railways n Nu mber of Channels: 2 n Base Station n Typical Insertion Loss: 0,5dB in MM n Military communication n Durability: 500 mating/unmating cycles (changes for<0,2 dB) n Navy Part Number Code Serie MTRJF TV 6M C G N MTRJ Field TV Shell Type 6: Plug with metal backshell, plastic PG clamp 6M: Plug with metal backshell and metal PG clamp 2: Square flange receptacle 2PE: Square flange, metal backshell and plastic PG clamp 2PEM: Square flange, metal backshell and metal PG clamp 7: Jam nut receptacle 7PE: Jam nut, metal backshell and plastic PG clamp 7PEM: Jam nut, metal backshell and metal PG clamp Cable Type A Only for receptacle m 0: Receptacle without backshell p Only for plug h e C: Mini round cable 2,8 mm n D: Flat duplex cable 1,6 mm o S: Duplex zipcord 1,6 mm l T: Flat duplex cable + Duplex zipcord for 1,6 mm - 2mm - 2,8mm Shell Finish N: Nickel plated G: Olive drab cadmium plated B: Bronze ZN: Black Zinc Nickel - ROHS Compliant Polarization N: Normal A / B / C / D / E Cap Series B EC N TV W 13 Protective cap type EC: For square flange receptacle n R equested information to order MTRJ Field Patchcord ER: For jam nut receptacle Plug MTRJ: Male /Female F: For plug Type of fiber: 50/125, 62,5/125, 9/125 Patchcord length: ex 10.5m Wire type Drawing: description of the product N: Nylon cord Blank: Metallic chain Contact us for other configuration TV: Series Shell finish Dismounting Tool Ordering Information B: Bronze MTRJFTV DM TOOL F: Electroless nickel plated, aluminium version W: Olive drab cadmium plated, aluminium version ZN: Black Zinc Nickel - ROHS Compliant 150

Line drawings (Dimensions in mm) 96 Max n Plug (MIL DTL 38 999 series III Size 13) 29 Max MTRJ FTV 6 X n Receptacle (MIL DTL 38 999 series III Size 13) with backshell Jam Nut receptacle with backshell Square flange receptacle with backshell MTRJ FTV 7PE/7PEM MTRJ FTV 2PE/2PEM n Square Flange Receptacle (MIL DTL 38 999 series III Size 13) Square flange receptacle rear Square flange receptacle panel mounting front panel mounting l o n MTRJ FTV 2 XXX Panel Drilling e h p m n Jam Nut Receptacle (MIL DTL 38 999 series III Size 13) Jam nut receptacle A 38.38 P1.a5n7e Ml TINhi,c 3k.n1e8s MsAX Panel Th9i.c3k7n MesAsX 9.372 M5.A58X 2358..5388 25.58 rear p25a.n5e8l mounting 1.57 MIN, 3.18 MAX 24.26 24.26 24.26 24.26 36.00 36.00 0.875 (inches) V 0.875 (in2c.3h1e sM)AX V 30.17 Size 13/25 2.31 MAX = 22.30 Size 13/25 34.93 30.17 34.93 = 22.30 MTRJ FTV 7 XXX Panel Drilling Protective caps Protective cap for Protective cap for plug (nylon cord) receptacles (nylon cord) 151

ROHS COMPLIANT N LC FIELD Fiber optic solution - Transform your LC patchcord into an Environmental Connector The LC Field offers an easy system to upgrade from a standard to an environmental LC. • Sealed against fluids and dust (IP68) • Shock, vibration proof • No cabling operation in field and no tools required for installation (except 1,6mm and 2mm zipcord cable) With the patented RJStop® system you can use a standard LC patchcord in a metallic plug which will protect it from shocks, dust and fluids. No hazardous on-field cabling! Applications Mechanical characteristics n Railways n Nu mber of Channels: 2 n Base Station n Typical Insertion Loss: 0,5dB in MM and SM n Military communication n Durability 500 mating/unmating cycles (changes for<0,2 dB) n Navy Part number code Serie LCF TV 6M D G N Optical connector type Shell Type Plug (compatible for all LC PC and APC Duplex) 6M: Plug with metal backshell and metal PG clamp Receptacle without backshell Compatible for all LC PC Duplex (adapter blue color) 2: Square flange receptacle 7: Jam nut receptacle Compatible for all LC APC Duplex (adapter green color) 2A: Square flange receptacle A 7A: Jam nut receptacle m Cable Type p Only for plug h D: Flat duplex cable 1,6 mm e n E: Duplex zipcord 1,6 mm o F: Flat duplex cable 2 mm l G: Duplex zipcord 2 mm H: Flat duplex cable 2,8 mm I: Duplex zipcord 2,8 mm T: Flat duplex cable + Duplex zipcord for 1,6 mm - 2 mm - 2,8 mm Only for receptacle (no backshell available for receptacle) 0: Receptacle without backshell Shell Finish N: Nickel plated ZN: Black Zinc Nickel - ROHS Compliant G: Olive drab cadmium plated B: Bronze Polarization N: Normal or A / B / C / D / E n R equested information to order LC Field Patchcord Cap Series B EC N TV W 19 Type of connector: Male /Female Protective cap type Type of fiber: 50/125, 62,5/125, 9/125 EC: For square flange receptacle Patchcord length: ex 10.5m ER: For jam nut receptacle F: For plug Drawing: description of the product Wire type Contact us for other configuration. N: Nylon cord nTools informations Blank: Metallic chain Mounting Tools: TV: Series LCFTV MO TOOL: LC FIELD Mounting tools Shell finish Dismounting Tools: B: Bronze LCFTV DM TOOL: LC FIELD Dismounting tools F: Electroless nickel plated, aluminium version (To dismount the LC you need to use both W: Olive drab cadmium plated, aluminium version dismounting and mounting tools) ZN: Black Zinc Nickel - ROHS Compliant Corresponding connector shell size: 19 152

Line drawings (Dimensions in mm) n Plug (MIL DTL 38 999 series III Size 19) 92 0 1 8, 3 ø n Square Flange Receptacle (MIL DTL 38 999 series III Size 19) +0,15 Square flange receptacle rear Square flange receptacle 22,99-0 36,53+-00,,2255 panel mounting front panel mounting +0 2 PLACES 20,83-0,13 1m1,a9x1 29,36 2 PLACES 29,36 +0 29,36 +0 26,97 26,97 4xø3,25-0,25 26,97 4x ø 3,25-0,25 2 PLACES 3,25+-00,1,230 ø 32,94 ø 28,98 0,13M 4 PLACES 40,50min 40,50min 3,89 M28x1-6g 4,9+30,-20,013 Panel Drilling max n Jam Nut Receptacle (MIL DTL 38 999 series III Size 19) ol n e h 49,50max p P1,A5N7 EMLI NT H 3IC,1K8N EMSASX 9,37 MAX 35,15+-00,025 ø 35,16 m A Jam nut receptacle 33,86+-00,025 33,86+-00,25 rear panel mounting 47,00min 2,31 MAX +0,043 22,30 39,67-0,041 +0,25 46,02-0,25 Panel Drilling Protective caps 20,24 MAX 29,62 MAX 1,25 (inches) m 25,40 mm Pprluogte (cntyivloe nc acpo rfdo)r 39,19 m Prercoetepctaticvlee sc a(npy floorn cord) 153

GLOSSARY 10BASE-T Category 5 e 10 Mbps Ethernet on twisted-pair (Category 3) Also called Enhanced Category 5. A performance cable. classification for twisted pair cables, connectors and systems. Specified to 100 MHz. Suitable for voice 100BASE-T and data applications up to 1000 Mbps. The twisted pair version of 100 Mbps Ethernet. Requires Category 5 cabling. Category 6 A performance classification for twisted pair cables, 1000BASE-T connectors and systems.Specified up to 250 MHz. A recent LAN standard for implementing 1000 Mbps Ethernet on Category 5 cable. Also called Gigabit CSMA/CD Ethernet. Carrier Sense Multiple Access/Collision Detect. The Medium Access Control (MAC) protocol used in Auto-MDIX Ethernet. A protocol which allows two Ethernet devices to negotiate their use of the Ethernet Transmit (Tx) and Data rate Receive (Rx) cable pairs. This allows two Ethernet The speed of the data transmission, measured in devices with MDI or MDI-X connectors to connect bps (bits per second) or Mbps. without using a cross-over cable. Duplex (Full, Half) Baud Full duplex is a communications method that allows A unit of measurement that denotes the number for the simultaneous transmission and reception of of bits that can be transmitted per second. For data. In Half Duplex communication, transmissions example, if a modem is rated at 9600 baud it is and receptions can occur in either direction but not capable of transmitting data at a rate of 9600 bits at the same time. per second. Ethernet A Bandwidth The most common network protocol in m p The maximum capacity of a network channel. use. A protocol is a set of rules enabling data h Usually expressed in bits per second (bps). Ethernet communications. Ethernet can operate over several e n channels have bandwidths of 10, 100, and 1000 different media including fiber optic, coaxial cable o l Mbps (Gigabit). and twisted-pair cable. bps IEEE 802.3 Bits Per Second is the unit used for measuring line IEEE Working Group for CSMA/CD, the protocol used speed, the number of information units transmitted in Ethernet transmissions. per second. IGMP snooping Broadcast The ability of a switch to observe Internet Group A transmission initiated by one station and sent to Multicast Protocol (IGMP) traffic in order to learn all stations on the network. IP Multicast group membership. The purpose is to restrict multicast transmissions to only those ports Byte which have requested them. The amount of memory needed to store one character such as a letter or a number. Equal to 8 bits LAN of digital information. The standard measurement Local Area Network. A network of directly-connected unit of a file size. machines (located in close proximity), providing high speed communication over physical media Category 5 such as fiber optics, coaxial cable, or twisted pair A performance classification for twisted pair cables, wiring. connectors and systems. Specified to 100 MHz. Suitable for voice and data applications up to 155 Mbps. 154

MAC Address RJ-Field A unique address assigned to a station interface, A wide range of connectors which allow to reinforce identifying that station on the network. With and seal standard RJ45 cable. See www.rjfield.com Ethernet, this is the unique 48-bit station address. Same as the physical address. SNMP Simple Network Management Protocol. This is THE Megabit (Mb) standard used for switch management programs. Megabit. One million bits of information, usually used to express a data transfer rate ; 1 Megabit/ Spanning Tree Protocol (STP) second = 1Mbps. A link management protocol providing path redundancy and preventing network loops by Megabyte (MB) defining a tree to span all switches in a network. MegaByte. A unit of data storage size which It forces redundant data paths into a standby represents one million characters of information. (blocked) state. If a path malfunction occurs, the topology is reconfigured and the link reestablished Multicast by activating the standby path. A transmission initiated by one station to many stations of the network. TCP/IP Transmission Control Protocol/Internet Protocol. A Port Mirroring set of protocols, resulting from ARPA efforts, used Port mirroring allows a switch port to monitor by the Internet to support services such as remote packets from any or all of its ports so that traffic can login (TELNET), file transfer (FTP) and mail (SMTP). be analysed. TELNET Quality of Service (QoS) The Internet standard protocol for remote login Some switches support QoS (per 802.1p and 802.1Q (terminal connection) service. TELNET allows a user standards) whereby messages can be assigned at one site to interact with a remote timesharing levels of priority. QoS is important where time- system at another site as if the user’s terminal were ol critical applications can be impaired by data delays. connected directly to the remote computer. n e h p RJ45 VLAN m 8-position modular jacks used on twisted pair links Virtual Local Area Network. A LAN that maps A for Ethernet cabling. stations on a basis other than location such as by department, user type or application. Managing traffic, workstations, and bandwidth can be easier with a VLAN and improve network efficiency. CABLE datas Category 5 Category 5E Category 6 Category 6a Category 6A Category 7 (Cat5) (Cat5E) (Cat6) (Cat6a) (Cat6A) (Cat7) Data rate 100 MBit/s 1 GBit/s 1 GBit/s 10 GBit/s 10 GBit/s 10 GBit/s 500 Mhz Frequency 100 Mhz 100 Mhz 250 Mhz 500 Mhz 600 Mhz 3db 4 pairs 4 pairs 4 pairs (each pair (each pair (each pair Twisted pairs 2 or 4 pairs 4 pairs 4 pairs invidually invidually invidually shielded) shielded) shielded) Max lenght 100 m 100 m 55 m 100 m 100 m 100 m ISO/IEC 11801 ANSI/TIA-568-A ANSI/TIA-568-B. ANSI/TIA-568-B. ISO/IEC 11801 Specification TIA/EIA-568-5-A 2002 category7/ 1-2001 2-1 2-10 amendment 2 class F 155

notes A m p h e n o l 156

notes l o n e h p m A 157

notes A m p h e n o l 158

AbOut AMphenOl Founded in 1932, Amphenol is one of the largest manufacturers of interconnect products in the world. The company designs, manufactures, and markets electrical, electronic, and fiber optic connectors, interconnect systems, and coaxial and specialty cables. Amphenol has a diversified presence as a leader in high growth areas of the interconnect industry and provides solutions for customers in the automotive, broadband, industrial, information technology and data communications, military and aerospace, mobile devices, and mobile networks markets. Amphenol More info on www.amphenol.com eNABliNG THe eleCTrONiCS reVOlUTiON Amphenol Military & Aerospace Operations (AMAO) has the largest and broadest selection of interconnect products in the military and aerospace markets. More info on www.amphenolmao.com europe frAnce Amphenol Air lB 2 rue Clément Ader, zAC de Wé - 08110 carignan +33 3 24 22 78 49 frAnce Amphenol SeFee z.i. des Cazes – BP243 - 12402 Saint-Affrique Cedex +33 5 65 98 11 00 gerMAnY Amphenol Air lB GMBH Am Kleinbahnhof 4 - 66740 Saarlouis +49 6831 981 00 itAlY Amphenol euroPeAn SAleS oPerATionS Via Barbaiana n.5 - 20020 lainate - Milano +39 293 254 214 uniteD KingDOM Amphenol iNVOTeC Unit 1-3, Hedging lane industrial estate, Dosthill - Tamworth, B77 5HH +44 1827 263 000 uniteD KingDOM Amphenol ionix SySTeMS Prospect House, Taylor Business Park, risley, Warrington, WA3 6HP +44 1 942 685 200 uniteD KingDOM Amphenol lTD Thanet Way, Whitstable - KeNT, cT53JF +44 1227 773 200 uniteD KingDOM Amphenol MArTec St Augustines Business Park, Swalecliffe Whitstable - Kent CT5 2QJ +44 1227 793 733 north America cAnADA Amphenol cAnADA 605 Milner avenue - Toronto, ontario +1 416 291 0647 usA Amphenol AeroSPAce oPerATionS 40-60 Delaware street - Sidney, ny 13838 +1 800 678 0141 usA Amphenol BOriSH TeCHNOlOGieS 4511 east Paris AVe - Grand rapids, Mi 49512 +1 616 554 9820 usA Amphenol FSi 1300 central expwy n, Suite 100 - Allen, Tx 75013 +1 214 547 2400 usA Amphenol griFFiTh enTerPriSeS 6000 east Coury Drive - Cottonwood, Az 86326 +1 928 634 3685 usA Amphenol nexuS TechnologieS 50 Sunnyside Avenue - Stamford, cT 06902 +1 203 327 7300 usA Amphenol PcD 72 Cherry Hill Drive - Beverly, MA. 01915 +1 978 624 3400 usA Amphenol PrinTeD circuiT Board Technology, 91 Northeastern Boulevard - Nashua, NH 03062 +1 603 324 4500 usA Amphenol SV MiCrOWAVe 2400 Centrepark West Drive - West Palm Beach, Fl +1 561 840 1800 usA Amphenol TiMeS MiCrOWAVe 358 Hall Avenue - Wallingford, CT 06492 +1 800 867 2629 Asia chinA Amphenol PcD co. Building 21, 1st liao Keng industrial zone, Shi Yan Street - Bao An District - Shenzhen 518108 +86 755 8173 8000/8286 inDiA Amphenol inTerconnecT inDiA 105 Bhosari industrial Area - Pune 411 026 +91 20 27120363 JApAn Amphenol JAPAn 471-1, Deba, ritto-City - Shiga 520 3041 +81 77 553 8501 KOreA Amphenol DAeShin 558 SongNae-Dong SoSa-Gu, Bucheon-city, Kyunggi-Do - 420-130 +81 32 610 3830/3845 singApOre Amphenol eAST ASiA 26/F, railway Plaza, 39 Chatham road South, Tsim Sha Tsui, Kowloon, Hong Kong +65 6294 2128 Other Areas AfricA Amphenol AFricA 30 impala rd - Sandton 2146 +27 82 410 5179 ArgentinA Amphenol ArgenTinA Av. Callao 930 2do piso Oficina B "Plaza" c1023 - AAP Buenos Aires +54 11 4815 6886 AustrAliA Amphenol AuSTrAliA PTy 2 Fiveways Blvd., Keysborough - Melbourne - Victoria 3173 +61 3 8796 8888 brAzil Amphenol DO BrAzil rua Diogo Moreira, 132, 20 andar, rooms 2001-2-3 +55 11 3815 1003 isrAel Amphenol BAr-TeC 3 Hagavish Street, K fir-Barkan Bldg. east industrial zone - Kfar-Sava, 44102 +972 9 764 4100 MexicO Amphenol OPTiMize Carretera internacional Km 6.5, Col. Parque industrial, Nogales, Sonora, C.P. 84094 +52 631 311 160 neW zeAlAnD Amphenol PHiTeK level 4, 2 Kingdon Street, Newmarket, Auckland 1023 +64 9 524 2984 russiA Amphenol ruSSiA yaroslavskaja Street 8 - 129164 Moscow +7 495 937 6341 turKeY Amphenol TUrKeY Sun Plaza 15 Kat: 15 Maslak Hah. Bilim Sok. No.5 - Sisli/istanbul, 34398 +90 212 367 92 19

Amphenol Socapex 948, promenade de l’Arve BP29 74311 Thyez Cedex - France Phone: +33 (0)4 50 89 28 00 contact@amphenol-socapex.fr www.amphenol-socapex.com For Technical Support +33 (0)4 50 89 28 49 technicalsupport@amphenol-socapex.fr www.amphenol-socapex.com/technical_support To buy our products +33 (0)4 50 90 28 00 contact@amphenol-socapex.fr www.amphenol-socapex.com/amphenol/sales Request a quote online at www.amphenol-socapex.com/quotation_request Documentation www.amphenol-socapex.com/documentation To order a paper version of our catalogs, send an e-mail to communication@amphenol-socapex.fr www.amphenol-socapex.com Follow Amphenol Socapex on social media : This catalog uses paper from managed forests, PEFC & FSC labels, and is printed by a printer certified “Imprim’Vert®” We reserve the right to modify our products in any way we deem necessary. Any duplication is prohibited, unless approved in writing. Designed by Amphenol Socapex DOC-000075-ANG - February 2018

Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: A mphenol: JE18 USBFTV7PE2G USBBF6100 USBBF6200 USBFTV7PE2N USBBF7 USBBFC7 USBF21NSCC USBF21BSCC JE15 USBFTV6G USBFTV72N USBFTV72G USBFTV7PE1N USBFTV71G USBFTV21G USBFTV2PE1G USBFTV21N USBFTV75GF459 USBBFTV21G USBBFTV21N USBBFTV22G USBBFTV22N USBBFTV2PE1G USBBFTV2PE1N USBBFTV2PE2G USBBFTV2PE2N USBBFTV6G USBBFTV6N USBBFTV71G USBBFTV71N USBBFTV72G USBBFTV72N USBBFTV7PE1G USBBFTV7PE1N USBBFTV7PE2G USBBFTV7PE2N USBBFTV2S2N10OPEN USBBFTV7S2G10OPEN USBFTV2PEM2N USBBFTV7S2N10OPEN USBBFTV7S2N10A USBBFTV2S2N10A USB3FTV6N USB3FTV7AG USB3FTV2AN USB3FTV7AN USB3FTV6G USB3FTV2AG USBBFTV2S2N05A USBBFTV2S2G10A USBBFTV2S2G05OPEN USBBFTV7S2G05A USBBFTV2S2G03A USBBFTV7S2N03OPEN USBBFTV7S2G03OPEN USBBFTV7S2N03A USBBFTV7S2G03A USB3FTV2APEN USBBFTV2S2G03OPEN USBFTV25GF459 USBBFTV7S2G10A USB3FTV2APEG USBBFTV2S2G05A USBBFTV7S2G05OPEN USBBFTV2S2N03A USBBFTV7S2N05A USBBFTV2S2G10OPEN USBBFTV7S2N05OPEN USBBFTV2S2N03OPEN USBBFTV2S2N05OPEN USBFTV72ZN USB3FTV7AZN USB3FTV6ZN USBF21ZNSCC USB3FTV2AZN USBFTV21ZN USBFTV71ZN USBFTV6ZN USB3F2ZNSCC USBFTV22ZN USBFTV2PEMSA2N10A USBFTV75NF459 USBFTV2PEMSA2N05OPEN USBFTV7SA2G04OPEN USBFTVSCCG USBFTV7SA2N04OPEN USBFTV2PEMSA2N10OPEN USBFTV7HA2G03OPEN USBFTV7SA2N04A USBFTV7SA2G04A USBFTV7SA2G25A USBFTV7SA2G20A