GaAs INTEGRATED CIRCUIT PG2030TK 6 T L, S-BAND SPDT SWITCH M U 4 <R> DESCRIPTION 1 The PG2030TK is a GaAs MMIC for L, S-band SPDT (Single Pole Double Throw) switch which were developed for mobile phone and other L, S-band applications. 2 This device can operate 2 control switching by control voltage 2.7 to 5.3 V, at frequencies from 0.5 to 2.5 GHz, O having the low insertion loss and high isolation. 2 This device is housed in a 6-pin lead-less minimold package and is suitable for high-density surface mounting. G FEATURES C <R> • Switch control voltage : Vcont (H) = 2.7 to 5.3 V- (2.8 V TYP.) : Vcont (L) = 0.2 to +0.2 V (0 V TYP.) • Low insertion loss : LINS1 = 0.25 dBE TYP. @ f = 0.5 to 1.0: GHz, Vcont = 2.8 V/0 V : LINS2 = 0.30 dB TYP. @ f = 1.0 to 2t.0 GHz, Vcont = 2.8 V/0 V : LINS3 = 0.35 dB TYP. @ f = 2.0 ton 2.5 GHz, Vcont = 2.8 V/0 V • High isolation : ISL1 = 27 dB TYP. @ f = 0.5 to 2.0 GHz, Vcont = 2.8 V/0 V S e : ISL2 = 24 dB TYP. @ f = 2.0 to 2.5 GHz, Vcont = 2.8 V/0 V • High power : Pin (0.1 dB) = +27.0 dBm TYmP. @ f = 2.0 GHz, Vcont = 2.8 V/0 V : Pin (1 dB) = +30.0 dBm TYP. @ f = 2.0 GHz, Vcont = 2.8 V/0 V (Reference value) • High-density surface mounting : 6-pin lead-less minimold package (1.5  1.1  0.55 mm) e A APPLICATIONS c • PCS, W-LAN, WLL and BluetoothTM etc. a l <R> ORDERING INFOHRMATION p Part Number Order Number ePackage Marking Supplying Form PG2030TK-E2 PG2030TK-E2-A R6-pin lead-less minimold G3R Embossed tape 8 mm wide P (1511 PKG) (Pb-free) Pin 1, 6 face the perforation side of the tape Qty 5 kpcs/reel n Remark To order evaluation samples, please contact your nearby sales office. I Part numb-er for sample order: PG2030TK-A p o r CDaution Although this device is designed to be as robust as possible, ESD (Electrostatic Discharge) can damage this device. This device must be protected at all times from ESD. Static charges may easily produce potentials of several kilovolts on the human body or equipment, which can discharge without detection. Industry-standard ESD precautions must be employed at all times. Document No. PG10409EJ03V0DS (3rd edition) Date Published August 2009 NS The mark <R> shows major revised points. The revised points can be easily searched by copying an "<R>" in the PDF file and specifying it in the "Find what:" field.

PG2030TK <R> PIN CONNECTIONS AND INTERNAL BLOCK DIAGRAM Pin No. Pin Name 6 1 OUTPUT1 T 2 MGND 3 OUTPUT2 U 4 4Vcont2 5 INPUT 1 6 Vcont1 2 TRUTH TABLE O 2 Vcont1 Vcont2 INPUTOUTPUT1 INPUTOUTPUT2 G Low High ON OFF High Low OFF -ON C ABSOLUTE MAXIMUM RATINGS (TA = +2E5C, unless otherwise specified) : t Parameter Symbol Ratings Unit n <R> Switch Control Voltage Vcont 6.0 Note V S e Input Power Pin +33 dBm m Operating Ambient Temperature TA 45 to +85 C Storage Temperature Tstg 55 to +150 C A e <R> Note Vcont1  Vcont2  6.0 V c a RECOMMENDED OPERATING RANGE (TA = +25C, unless otherwise specified) l H Parameter Symbopl MIN. TYP. MAX. Unit <R> Switch Control Voltage (H) Vecont (H) 2.7 2.8 5.3 V Switch Control Voltage (L) Vcont (L) 0.2 0 0.2 V R P n I - p o r D 2 Data Sheet PG10409EJ03V0DS

PG2030TK ELECTRICAL CHARACTERISTICS (TA = +25C, Vcont = 2.8 V/0 V, DC cut capacitors = 56 pF, unless otherwise specified) Parameter Symbol Test Conditions MIN. TYP. MAX. Unit 6 T Insertion Loss 1 LINS1 f = 0.5 to 1.0 GHz  0.25 0.45 dB M Insertion Loss 2 LINS2 f = 1.0 to 2.0 GHz  0.30 0.50 dB Insertion Loss 3 LINS3 f = 2.0 to 2.5 GHz  0.35 0.55 dB U 4 Isolation 1 ISL1 f = 0.5 to 2.0 GHz 23 27  dB Isolation 2 ISL2 f = 2.0 to 2.5 GHz 20 24 1 dB Input Return Loss RLin f = 0.5 to 2.5 GHz 15 20  dB 2 Output Return Loss RLout f = 0.5 to 2.5 GHz O 15 20  dB 2 0.1 dB Gain Compression Pin (0.1 dB) f = 2.0 GHz +25.5 +27.0  dBm Input Power Note f = 2.5 GHz +2G5.5 +27.0  dBm Switch Control Current Icont No signal  4 20 A C Switch Control Speed tSW -  50 500 ns Note Pin (0.1 dB) is measured the input power leveEl when the insertion loss increases more 0.1 dB than that of linear : range. t n STANDARD CHARACTERISTICS FOR REFERENCE (TA = +25C, Vcont = 2.8 V/0 V, DC cSut capacitors = 56 peF, unless otherwise specified) m Parameter Symbol Test Conditions MIN. TYP. MAX. Unit 1 dB Gain Compression Pin (1 dB) f = 2.0 GHz  +30.0  dBm Input Power Note A e c Note Pin (1 dB) is measured the input power level when the insertion loss increases more 1 dB than that of linear a range. l H Caution This device is used it is necpessary to use DC cut capacitors. The value of DC cut capacitors should be chosen to accommodate the frequency of operation, e bandwidth, switching speed and the condition with actual board of your system. The range of recommended DC cuRt capacitor value is less than 100 pF. P n I - p o r D 3 Data Sheet PG10409EJ03V0DS

PG2030TK EVALUATION CIRCUIT (Vcont = 2.8 V/0 V, DC cut capacitors = 56 pF) 6 T M U 4 1 2 O 2 G C - E : t n The application circuits and their parameters are for reference only and are not intended for use in actual design-ins. S e m e A c a l H p e R P n I - p o r D 4 Data Sheet PG10409EJ03V0DS

PG2030TK ILLUSTRATION OF THE TEST CIRCUIT ASSEMBLED ON EVALUATION BOARD 6 T M U 4 1 2 O 2 G C - E : t n S e m e A c a l H p e USING THE EVALUATION BOARD R SymPbol Values C1, C2, C3 56 pFn C4, C5 1 000 pF I - p o r D 5 Data Sheet PG10409EJ03V0DS

PG2030TK TYPICAL CHARACTERISTICS (TA = +25C, Vcont = 2.8 V/0 V, DC cut capacitors = 56 pF, unless otherwise specified) 6 T M U 4 1 2 O 2 G C - E : t n S e m e A c a l H p e R P n I - p o r D Remark The graphs indicate nominal characteristics. 6 Data Sheet PG10409EJ03V0DS

PG2030TK 6 T M U 4 1 2 O 2 G C - E : t n S e m e A c a l Remark The graHphs indicate nominal characteristics. p e R P n I - p o r D 7 Data Sheet PG10409EJ03V0DS

PG2030TK <R> PACKAGE DIMENSIONS 6-PIN LEAD-LESS MINIMOLD (1511 PKG) (UNIT: mm) 6 T M U 4 1 2 O 2 G C - E : t n S e m e A c a l H p e R P n I - p o r D 8 Data Sheet PG10409EJ03V0DS

PG2030TK <R> RECOMMENDED SOLDERING CONDITIONS This product should be soldered and mounted under the following recommended conditions. For soldering methods and conditions other than those recommended below, contact your nearby sales office. 6 Soldering Method Soldering Conditions T Condition Symbol M Infrared Reflow Peak temperature (package surface temperature) : 260C or below IR260 Time at peak temperature : 10 seconds or less Time at temperature of 220C or higher : 60 seconds or less U 4 Preheating time at 120 to 180C : 12030 seconds Maximum number of reflow processes : 3 times 1 Maximum chlorine content of rosin flux (% mass) : 0.2%(Wt.) or below Wave Soldering Peak temperature (molten solder temperature) : 260C or below 2 WS260 Time at peak temperature O: 10 seconds or less Preheating temperature (package surface temperature) : 120C or belo2w Maximum number of flow processes : 1 time G Maximum chlorine content of rosin flux (% mass) : 0.2%(Wt.) or below Partial Heating Peak temperature (pin temperature) : 350C or below HS350 C Soldering time (per side of device) - : 3 seconds or less Maximum chlorine content of rosin flux (% mass) : 0.2%(Wt.) or below E : Caution Do not use different soldering methods together (except for partial heating). t n S e m e A c a l H p e R P n I - p o r D 9 Data Sheet PG10409EJ03V0DS

PG2030TK This product uses gallium arsenide (GaAs). Caution GaAs Products GaAs vapor and powder are hazardous to human health if inhaled or ingested, so please observe the following points. • Follow related laws and ordinances when disposing of the product. If there are no applicable laws 6 and/or ordinances, dispose of the product as recommended below. T 1. Commission a disposal company able to (with a license to) collect, transport and dispose of M materials that contain arsenic and other such industrial waste materials. 2. Exclude the product from general industrial waste and household garbage, and ensure that the product is controlled (as industrial waste subject to spUecial control) up until final d4isposal. • Do not burn, destroy, cut, crush, or chemically dissolve the product. 1 • Do not lick the product or in any way allow it to enter the mouth. 2 O 2 G C - E : t n S e m e A c a l H p e R P n I - p o r D 10 Data Sheet PG10409EJ03V0DS

NOTICE 1. Descriptions of circuits, software and other related information in this document are provided only to illustrate the operation of semiconductor products and application examples. You are fully responsible for the incorporation of these circuits, software, and information in the design of your equipment. California Eastern Laboratories and Renesas Electronics assumes no responsibility for any losses incurred by you or third parties arising from the use of 6these circuits, software, or information. T 2. California Eastern Laboratories has used reasonable care in preparing the information included in this document, but California Eastern Laboratories does M not warrant that such information is error free. California Eastern Laboratories and Renesas Electronics assumes no liability whatsoever for any damages incurred by you resulting from errors in or omissions from the information included herein. 3. California Eastern Laboratories and Renesas Electronics do not assume any liability for infringement of patents, copyrights, or other intellectual property rights of third parties by or arising from the use of Renesas Electronics products or technical informUation described in this docum4ent. No license, express, implied or otherwise, is granted hereby under any patents, copyrights or other intellectual property rights of California Eastern Laboratories or Renesas Electronics or others. 1 4. You should not alter, modify, copy, or otherwise misappropriate any Renesas Electronics product, whether in whole or in part. California Eastern Laboratories and Renesas Electronics assume no responsibility for any losses incurred by you or third parties arising from such alteration, modification, copy or otherwise misappropriation of Renesas Electronics product. 2 5. Renesas Electronics products are classified according to the following two quality grades: “Standard” and “High Quality”. The recommended applications O for each Renesas Electronics product depends on the product’s quality grade, as indicated below. “Standard”: Computers; office equipment; communications 2 equipment; test and measurement equipment; audio and visual equipment; home electronic appliances; machine tools; personal electronic equipment; and industrial robots etc. “High Quality”: Transportation equipment (automobiles, trains, ships, etc.); traffic control systems; anti-disaster systems; anti-crime systems; and safety equipment etc. Renesas Electronics products are neither intended nor authorized for useG in products or systems that may pose a direct threat to human life or bodily injury (artificial life support devices or systems, surgical implantations etc.), or may cause serious property damages (nuclear reactor control systems, military equipment etc.). You must check the quality grade of each Renesas Electronics product before using it in a particular application. You may not use any Renesas Electronics product for any a-pplication for which it is not inCtended. California Eastern Laboratories and Renesas Electronics shall not be in any way liable for any damages or losses incurred by you or thir d parties arising from the use of any Renesas Electronics product for which the product is not intended by California Eastern Laboratories or Renesas Electronics. 6. You should use the Renesas Electronics products described in thisE document within the range specified by California Eastern Laboratories, especially with respect to the maximum rating, operating supply voltage range, movement power voltage ran:ge, heat radiation characteristics, installation and other product characteristics. California Eastern Laboratories shall have no liability for malfunctions or dtamages arising out of the use of Renesas Electronics products beyond such specified ranges. n 7. Although Renesas Electronics endeavors to improve the quality and reliability of its products, semiconductor products have specific characteristics such as the occurrence of failure at a certain rate and malfunctions under certain use conditions. Further, Renesas Electronics products are not subject to radiation resistance design. Please be sure to implement safetyS measures to guard them againest the possibility of physical injury, and injury or damage caused by fire in the event of the failure of a Renesas Electronics product, such as safety design for hardware and software including but not limited to redundancy, m fire control and malfunction prevention, appropriate treatment for aging degradation or any other appropriate measures. Because the evaluation of microcomputer software alone is very difficult, please evaluate the safety of the final products or systems manufactured by you. 8. Please contact a California Eastern Laboratories sales office for details as to environmental matters such as the environmental compatibility of each Renesas Electronics product. Please use Renesas Electronics products in compleiance with all applicable laws and regulations that regulate the inclusion or use of A controlled substances, including without limitation, the EU RoHS Directive. California Eastern Laboratories and Renesas Electronics assume no liability for damages or losses occurring as a result of your noncompliance wicth applicable laws and regulations. 9. Renesas Electronics products and technology may not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any applicable domestic or foreign laws or regulations. aYou should not use Renesas Electronics products or technology described in this document for any purpose relating to military applications or use by the military, including but not limited to the development of weapons of mass destruction. When exporting the Renesas Electronics products or technologyl described in this document, you should comply with the applicable export control laws and H regulations and follow the procedures required by suchp laws and regulations. 10. It is the responsibility of the buyer or distributor of California Eastern Laboratories, who distributes, disposes of, or otherwise places the Renesas Electronics product with a third party, to notify such third party in advance of the contents and conditions set forth in this document, California Eastern Laboratories and e Renesas Electronics assume no responsibility for any losses incurred by you or third parties as a result of unauthorized use of Renesas Electronics products. 11. This document may not be reproduced or duplicated in any form, in whole or in part, without prior written consent of California Eastern Laboratories. 12. Please contact a California Eastern LaboratorRies sales office if you have any questions regarding the information contained in this document or Renesas Electronics prPoducts, or if you have any other inquiries. NOTE 1: “Renesas Electronics” as used in nthis document means Renesas Electronics Corporation and also includes its majority-owned subsidiaries. NOTE 2: “Renesas Electronics product(s)” means any product developed or manufactured by or for Renesas Electronics. NOTE 3: Products and product informIation are subject to change without notice. - p CEL Headquarters • 4590 Patrick Henry Drive, Santa Clara, CA 95054 • Phone (408) 919-2500 • www.cel.com o For a complete list of sales offices, representatives and distributors, r Please visit our website: www.cel.com/contactus D