ALUMINUM ELECTROLYTIC CAPACITORS PB Miniature Sized, High Ripple Current High Reliability series High ripple current load life of 5000 / 7000 hours at +105°C. Suited for ballast application. Compliant to the RoHS directive (2002/95/EC). CA Long Life PB Products which are scheduled to be discontinued. Not recommended for new designs Smaller PT Specifications Item Performance Characteristics Category Temperature Range –40 to +105°C (10 to 50V), –25 to +105°C (160 to 450V) Rated Voltage Range 10 to 450V Rated Capacitance Range 0.47 to 3300µF Capacitance Tolerance ±20% at 120Hz, 20°C Rated Voltage (V) 10 to 50V 160 to 450V Leakage Current After 2 minutes' application of rated After 2 minutes' application of rated ——— voltage, leakage current is not more than voltage, leakage current is not more than 0.01CV or 3 (µA) , whichever is greater. 0.06CV+10 (µA) . Measurement frequency:120Hz at 20°C Tangent of loss angle (tan δ) Rated voltage (V) 10 16 25 35 50 160 200 250 350 400 450 tan δ (MAX.) 0.30 0.25 0.22 0.18 0.15 0.15 0.15 0.15 0.20 0.24 0.24 Measurement frequency: 120Hz Stability at Low Temperature Rated voltage (V) 10 16 25 35 50 160 200 250 350 400 450 Impedance ratio ZT / Z20 (MAX.) Z–25°C /Z+20°C 3 2 2 2 2 3 3 3 4 6 6 The specifications listed at right shall be met when the Within ±30% of the initial capacitance value(10 to 50V) Capacitance change capacitors are restored to 20°Cafter D.C. bias plus Within ±20% of the initial capacitance value(160 to 450V) Endurance rhaotuerds rfioprp lφeD c=u1r0re annt dis 1 a2p.5p li(e1d0 ftoor 5500V0)0) haot u1r0s5 (°7C0,0 t0he tan δ 320000%% oorr lleessss tthhaann tthhee iinniittiiaall ssppeecciiffiieedd vvaalluuee ((1106 0to t o5 04V50)V) peak voltage shall not exceed the rated voltage. Leakage current Less than or equal to the initial specified value After storing the capacitors under no load at 105˚Cfor 1000 hours and then performing voltage treatment based on JIS C Shelf Life 5101-4 clause 4.1 at 20°C, they shall meet the specified values for the endurance characteristics listed above. Marking Printed with white color letter on dark brown sleeve. Radial Lead Type Type numbering system (Example : 160V 22µF) Sleeve (P.E.T.) φd 1 2 3 4 5 6 7 8 9 10 11 12 U P B 2 C 2 2 0 M P D Size code + MAXD ±0.5P Capaci Ct(a±on2nc0fei%g tuo)r laetriaonnce φ Rated capacitance (22µF) rePlrieefs svuernet L + MAX 15MIN 4MIN Rated voltage (160V) (φ6.3up) Series name Type (mm) Configuration φD 5 6.3 8 10 12.5 16 18 22 25 φ D PPbb--ffrreeee lPeEadTw silreeeve P 2.0 2.5 3.5 5.0 5.0 7.5 7.5 10.0 12.5 5 DD φd 0.5 0.5 0.6 0.6 0.6 0.8 0.8 1.0 1.0 6.3 ED 00..55 00..55 00..55 00..55 00..55 0.5 0.5 1.0 1.0 8 · 10 PD 12.5 to 18 HD 22 · 25 RD (φD 18) 1.5 (φD 22) 2.0 • Please refer to page 20 about the end seal configulation. Please refer to page 20, 21, 22 about the formed or taped product spec. Please refer to page 4 for the minimum order quantity. Dimension table in next page. CAT.8100B

ALUMINUM ELECTROLYTIC CAPACITORS PB series Dimensions V 10 16 25 35 50 Cap.(µF) Code 1A 1C 1E 1V 1H 0.47 R47 5× 11 5 1 010 5× 11 10 2.2 2R2 5× 11 15 3.3 3R3 5× 11 20 4.7 4R7 5× 11 25 10 100 5× 11 30 22 220 5× 11 40 33 330 5× 11 50 6.3× 11 55 47 470 5× 11 55 6.3× 11 60 6.3× 11 65 100 101 5× 11 70 6.3× 11 85 6.3× 11 95 8× 11.5 100 8× 11.5 100 220 221 6.3× 11 100 8× 11.5 130 8× 11.5 195 10× 12.5 200 10× 16 235 330 331 8× 11.5 150 8× 11.5 195 10× 12.5 255 10× 16 280 10× 20 295 470 471 8× 11.5 180 10× 12.5 270 10× 16 325 10× 20 350 12.5× 20 370 1000 102 10× 16 350 10× 20 430 12.5× 20 500 12.5× 25 570 2200 222 12.5× 20 550 12.5× 25 710 Rated 3300 332 12.5× 25 810 Case size φD×L(mm) ripple Rated ripple current (mArms) at 105°C 120Hz V 160 200 250 350 400 450 Cap.(µF) Code 2C 2D 2E 2V 2G 2W 10 100 10 × 20 125 10 × 20 125 12.5 × 20 150 250 250 300 22 220 10 × 20 250 10 ×20 250 12.5 × 20 300 12.5 × 20 175 12.5 × 25 200 16 × 25 275 500 500 600 350 400 550 33 330 10 × 20 250 12.5 × 20 300 12.5 × 20 300 16 × 20 250 16 × 25 300 18 × 25 350 500 600 600 500 600 700 47 470 12.5 × 20 300 12.5 × 20 300 12.5 × 25 350 16 × 25 325 18 × 25 375 18 × 31.5 425 600 600 700 650 750 850 56 560 18 × 35.5 475 950 68 680 12.5 × 25 375 12.5 × 25 375 16 × 25 500 18 × 25 400 18 × 31.5 450 18 × 40 500 750 750 1000 800 900 1000 82 820 18 × 35.5 500 22 × 40 550 1000 1100 100 101 16 × 25 550 16 × 25 550 18 × 25 600 18 × 31.5 500 18 × 40 550 1100 1100 1200 1000 1100 120 121 18 × 35.5 1517550 22 × 40 1620000 2225 ×× 5400 1740000 150 151 18 × 25 650 18 × 25 650 18 × 31.5 750 18 × 40 650 25 × 50 800 1300 1300 1500 1300 1600 180 181 18 × 35.5 1875000 22 × 40 1755000 2225 ×× 5400 1860000 220 221 18 × 31.5 850 18 × 40 950 25 × 50 900 1700 1900 1800 × 950 × 1050 22 × 50 950 270 271 18 31.5 1900 22 40 2100 25 × 40 1900 330 331 18 × 31.5 850 18 × 40 1050 25 × 50 1050 1700 2100 2100 × × 950 × 1150 22 50 1150 390 391 18 35.5 22 40 × 1900 2300 25 40 2300 × 1050 × 1400 470 471 18 40 25 50 2100 2800 × × 1150 22 50 1350 560 561 22 40 × 2300 25 40 2700 × 22 50 1350 × 1500 680 681 × 25 50 25 40 2700 3000 × 1500 Case size Rated 820 821 25 50 3000 φD×L(mm) ripple : Rated ripple current (mArms) at 105°C 120Hz Frequency coefficient of rated ripple current : Rated ripple current (mArms) at 105°C 100kHz V Cap.(µF) Frequency 50Hz 120Hz 300Hz 1kHz 10k to 50kHz100kHz or more : In this case, 6 will be put at 12th digit of type 0.47 to 100 0.75 1.00 1.20 1.40 1.55 1.65 numbering system. 10 to 50 0022 to 4700 0.85 1.00 1.10 1.20 1.25 1.30 1000 to 3300 0.95 1.00 1.03 1.05 1.10 1.15 160 to 450 010 to 820 0.60 1.00 1.20 1.60 1.80 2.00 Wider range of rating. CAT.8100B