ALUMINUM ELECTROLYTIC CAPACITORS UPA Miniature Sized, Low lmpedance, High Reliability For Switching Power Supplies Lower impedance than UPW. Smaller case size and high ripple current. Compliant to the RoHS directive (2011/65/EU). UPA Low UPW Impedance Specifications ltem Performance Characteristics Category Temperature Range –55 to +105˚C Rated Voltage Range 6.3 to 35V Rated Capacitance Range 180 to 10000µF Capacitance Tolerance ±20% at 120Hz, 20˚C Leakage Current After 1 minute's application of rated voltage at 20°C, leakage current is not more than 0.03CV or 4 (µA), whichever is greater. Rated voltage (V) 6.3 10 16 25 35 120Hz 20˚C Tangent of loss angle (tan δ) tan δ (MAX.) 0.22 0.19 0.16 0.14 0.12 For capacitance of more than 1000µF, add 0.02 for every increase of 1000µF. Rated voltage (V) 6.3 10 16 25 35 120Hz Stability at Low Temperature Impedance ratio ZT / Z20 (MAX.) Z–55˚C / Z+20˚C 3 3 3 3 3 The specifications listed at right shall be met when the capacitors are restored to 20˚C after D.C. bias plus Capacitance change Within ± 20% of the initial capacitance value (6.3V, 10V : ±30%) Endurance rated ripple current is applied for 5000 hours (3000 tan δ 200% or less than the initial specified value (6.3V, 10V : 300%) hours for φD=8, 4000 hours for φD=10) at 105˚C, the Leakage current Less than or equal to the initial specified value peak voltage shall not exceed the rated voltage. After storing the capacitors under no load at 105˚C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 Shelf Life clause 4.1 at 20°C, they shall meet the specified values for the endurance characteristics listed above. Marking Printed with white color letter on dark brown sleeve. Radial Lead Type Type numbering system (Example : 10V 470µF) 1 2 3 4 5 6 7 8 9 10 11 12 U P A 1 A 4 7 1 M P D Sleeve (P.E.T.) d Size code Configuration + 0.5MAX.D ±0.5P CapRacaitteadn ccea p taocleitraannccee ((4±7200µ%F)) φ Rated voltage (10V) L+ MAX. 15MIN 4MIN Series name Pressure relief vent Type Configuration (mm) φD PPbb--ffrreeee lPeEadTw silreeeve (L < 20) 1.5 φD 8 10 12.5 16 18 8 10 PD (L 20) 2.0 P 3.5 5.0 5.0 7.5 7.5 12.5 to 18 HD φd 0.6 0.6 0.6 0.8 0.8 Frequency coefficient of rated ripple current Cap. (µF) Frequency 50Hz 120Hz 300Hz 1kHz 10kHz or more 180 to 330 0.55 0.65 0.75 0.85 1.00 • Please refer to page 20 about the end seal configuration. 390 to 1000 0.70 0.75 0.80 0.90 1.00 1200 to 10000 0.80 0.85 0.90 0.95 1.00 Please refer to page 20, 21, 22 about the formed or taped product spec. Please refer to page 4 for the minimum order quantity. Dimension table in next page. 214 CAT.8100H

ALUMINUM ELECTROLYTIC CAPACITORS UPA Dimensions V (Code) 6.3 (0J) 10 (1A) 16 (1C) Case size Impedance (Ω) MAX. Rated Case size Impedance (Ω) MAX. Rated Case size Impedance (Ω) MAX. Rated Item ripple ripple ripple Cap.(µF) Code φ(Dm m× )L 12000˚kCH /z 1–0100k˚CH z/ 1(0m5˚CA / r1m00ksH)z φ(Dm m× )L 12000˚kCH /z 1–0100k˚CH z/ 1(0m5˚CA / r1m00ksH)z φ(Dm m× )L 12000˚kCH /z 1–0100k˚CH z/ 1(0m5˚CA / r1m00ksH)z 330 331 8 × 11.5 0.090 0.180 0630 390 391 8 × 11.5 0.090 0.180 0630 470 471 8 × 11.5 0.090 0.180 0630 10 × 12.5 0.063 0.126 0900 560 561 8 × 11.5 0.090 0.180 0630 8 × 11.5 0.090 0.180 0630 8 × 15 0.062 0.124 0860 680 681 8 × 11.5 0.090 0.180 0630 10 × 12.5 0.063 0.126 0900 8 × 15 0.062 0.124 0860 8 × 20 0.044 0.088 1220 820 821 10 × 12.5 0.063 0.126 0900 10 × 16 0.049 0.098 1240 8 × 15 0.062 0.124 0860 8 × 20 0.044 0.088 1220 10 × 16 0.049 0.098 1240 1000 102 10 × 12.5 0.063 0.126 0900 10 × 12.5 0.063 0.126 0900 10 × 16 0.049 0.098 1240 10 × 20 0.035 0.070 1490 10 × 12.5 0.063 0.126 0900 8 × 20 0.044 0.088 1220 1200 122 10 × 20 0.035 0.070 1490 10 × 16 0.049 0.098 1240 10 × 16 0.049 0.098 1240 8 × 20 0.044 0.088 1220 1500 152 10 × 16 0.049 0.098 1240 10 × 20 0.035 0.070 1490 10 × 25 0.033 0.066 1680 10 × 20 0.035 0.070 1490 10 × 20 0.035 0.070 1490 1800 182 10 × 25 0.033 0.066 1680 10 × 20 0.035 0.070 1490 10 × 25 0.033 0.066 1680 12.5 × 20 0.029 0.058 1890 2200 222 10 × 25 0.033 0.066 1680 12.5 × 20 0.029 0.058 1890 12.5 × 25 0.022 0.044 2280 2700 272 10 × 25 0.033 0.066 1680 12.5 × 20 0.029 0.058 1890 12.5 × 25 0.022 0.044 2280 12.5 × 31.5 0.018 0.036 2720 3300 332 12.5 × 20 0.029 0.058 1890 12.5 × 25 0.022 0.044 2280 16 × 20 0.026 0.052 2330 3900 392 12.5 × 25 0.022 0.044 2280 12.5 × 25 0.022 0.044 2280 12.5 × 35.5 0.016 0.032 2940 12.5 × 31.5 0.018 0.036 2720 16 × 25 0.019 0.038 2760 4700 472 12.5 × 25 0.022 0.044 2280 16 × 20 0.026 0.052 2330 18 × 20 0.025 0.050 2640 12.5 × 31.5 0.018 0.036 2720 16 × 31.5 0.017 0.035 2810 5600 562 12.5 × 35.5 0.016 0.032 2940 16 × 20 0.026 0.052 2330 18 × 25 0.018 0.036 2850 6800 682 12.5 × 35.5 0.016 0.032 2940 16 × 25 0.019 0.038 2760 18 × 25 0.018 0.036 2850 16 × 25 0.019 0.038 2760 16 × 31.5 0.017 0.034 2810 8200 822 18 × 20 0.025 0.050 2640 18 × 25 0.018 0.036 2850 16 × 31.5 0.017 0.034 2810 10000 103 18 × 25 0.018 0.036 2850 V (Code) 25 (1E) 35 (1V) Case size Impedance (Ω) MAX. Rated Case size Impedance (Ω) MAX. Rated Item ripple ripple Cap.(µF) Code φ(Dm m× )L 12000˚kCH /z 1–0100k˚CH z/ 1(0m5˚CA / r1m00ksH)z φ(Dm m× )L 12000˚kCH /z 1–0100k˚CH z/ 1(0m5˚CA / r1m00ksH)z 180 181 8 × 11.5 0.090 0.180 0630 8 × 15 0.062 0.124 0860 270 271 8 × 11.5 0.090 0.180 0630 10 × 12.5 0.063 0.126 0900 330 331 8 × 11.5 0.090 0.180 0630 8 × 20 0.044 0.088 1220 390 391 8 × 15 0.062 0.124 0860 10 × 16 0.049 0.098 1240 8 × 15 0.062 0.124 0860 470 471 10 × 12.5 0.063 0.126 0900 8 × 20 0.044 0.088 1220 560 561 10 × 20 0.035 0.070 1490 10 × 16 0.049 0.098 1240 680 681 10 × 16 0.049 0.098 1240 10 × 25 0.033 0.066 1680 820 821 10 × 20 0.035 0.070 1490 12.5 × 20 0.029 0.058 1890 10 × 25 0.033 0.066 1680 1000 102 12.5 × 20 0.029 0.058 1890 12.5 × 20 0.029 0.058 1890 1200 122 12.5 × 20 0.029 0.058 1890 12.5 × 25 0.022 0.044 2280 12.5 × 31.5 0.018 0.036 2720 1500 152 16 × 20 0.026 0.052 2330 12.5 × 35.5 0.016 0.032 2940 1800 182 12.5 × 25 0.022 0.044 2280 16 × 20 0.026 0.052 2330 12.5 × 31.5 0.018 0.036 2720 16 × 25 0.019 0.038 2760 2200 222 16 × 20 0.026 0.052 2330 18 × 20 0.025 0.050 2640 16 × 31.5 0.017 0.035 2810 2700 272 12.5 × 35.5 0.016 0.032 2940 18 × 25 0.018 0.036 2850 : In this case, 6 will be put at 12th digit of 16 × 25 0.019 0.038 2760 type numbering system. 3300 332 18 × 31.5 0.016 0.032 2910 18 × 20 0.025 0.050 2640 : In this case, 3 will be put at 12th digit of 4700 472 18 × 25 0.018 0.036 2850 type numbering system. 215 CAT.8100H

Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: N ichicon: UPA0J102MPD UPA0J103MHD UPA0J152MPD UPA1A392MHD UPA0J122MPD UPA1A152MPD UPA1A182MPD UPA1A222MPD UPA1A332MHD UPA1A471MPD UPA1A472MHD UPA1A561MPD UPA1A562MHD UPA1A682MHD UPA1A821MPD UPA1A272MHD UPA0J561MPD UPA0J222MPD UPA0J272MPD UPA0J332MHD UPA1A122MPD UPA0J472MHD UPA0J562MHD UPA0J681MPD UPA0J682MHD UPA0J822MHD UPA1A102MPD UPA1A822MHD UPA1C682MHD UPA1C821MPD UPA1E102MPD UPA1E122MHD UPA1C681MPD UPA1E222MHD UPA1E271MPD UPA1E331MPD UPA1E391MPD UPA1E471MPD UPA1E182MHD UPA1C332MHD UPA1C102MPD UPA1C122MPD UPA1C152MPD UPA1C222MHD UPA1C331MPD UPA1E332MHD UPA1C391MPD UPA1C392MHD UPA1C471MPD UPA1C472MHD UPA1C562MHD UPA1C272MHD UPA1V391MPD UPA1V561MPD UPA1V681MPD UPA1E472MHD UPA1V332MHD UPA1E272MHD UPA1E821MPD UPA1E561MPD UPA1E681MPD UPA1V102MHD UPA1V122MHD UPA1V152MHD UPA1V271MPD UPA1V272MHD UPA1V222MHD UPA1V182MHD UPA1V181MPD UPA1A222MHD6 UPA1E102MHD6 UPA1V821MPD UPA1C472MHD6TN UPA1A821MPD1TD UPA1A122MPD1TD UPA1E332MHD1TN UPA1V391MPD1TD UPA1E182MHD1TO UPA0J222MPD6TD UPA1C391MPD1TD UPA1V561MPD1TD UPA1C681MPD6TD UPA1E561MPD6TD UPA1A182MPD1TD UPA1A222MHD6TO UPA1C222MHD6TO UPA0J822MHD1TN UPA1V271MPD1TD UPA0J152MPD1TD UPA0J332MHD1TO UPA1V272MHD6TN UPA1A471MPD1TD UPA1V102MHD1TO UPA1E561MPD1TD UPA1C102MPD6TD UPA0J561MPD1TD UPA1E471MPD6TD UPA1E681MPD1TD UPA1V681MPD1TD UPA1C122MPD1TD