UDS1100-IAP Industrial Device Server In minutes,securely connect factory floor devices to enterprise systems Access,monitor and control equipment over Ethernet P Replace dedicated PCs and/or modem lines with fast and A reliable Ethernet networking I - Supports RS-232,RS-422 and RS-485 communications 0 Includes Modbus TCP,ASCII,RTU and DF1 protocols 0 1 15KV serial ESD protection S1 Wide -40°– 70°C operating temperature range D U Environmentally-friendly RoHS and WEEE-compliant ™ Remotely Monitor, Manage and Control Industrial r e v Equipment Over the Net r e S e The UDS1100-IAPis a rugged and powerful tool Built-in Web Server c i v The built-in web server enables users to access and e which enables users to connect, manage and control D configure the UDS1100-IAPfrom a standard web browser. just about any piece of industrial equipment from Web pages enabling the UDS1100-IAPto be customized al for unique applications can be built using Lantronix ri virtually anywhere over Ethernet or the Internet. development tools. On-board Flash memory provides room st u for future system software upgrades and maintenance-free, d This single-port Device Server is a quick, simple and nonvolatile web page storage. n I Easy to Set Up and Use inexpensive way to bring the advantages of real-time The UDS1100-IAP can be set up locally through its serial or on-demand information access. port, or remotely using Telnet or a web browser. The included DeviceInstaller™ Windows-based configuration software simplifies setup and provides an easy way to: • Assign IP & other network specific addresses Standards Based Communications • Load custom web pages Using an open Ethernet architecture as a standard provides • Enable web-based configuration of the Device Server the flexibility for equipment to communicate to virtually any type of industrial device. • Ping or query the attached device(s) over the network • View specific device data files When used in conjunction with an OPC server, most • Upgrade firmware Windows® based HMI, SCADAand PC-based control • Simplify process of installing industrial protocols applications have full access to information in the industrial equipment networked by the UDS1100-IAP. Complete with an auto MDI/MDIX Ethernet interface, the Extending Communications Across the Globe UDS1100-IAPis a powerful device communication solution that’s perfect for your most demanding industrial applications. Our approach to network-enabling devices is transparent to your attached equipment and software so you won’t need Modem Replacement to change the way you work. Using a method called serial In modem emulation mode, the UDS is used to replace dial- tunneling, the UDS1100-IAP encapsulates serial data into up modems. The unit accepts modem AT commands on the packets and transports it over Ethernet. Serial tunneling can serial port. It then establishes a network connection to the be done in multiple ways: end device, leveraging network connections and bandwidth • Using Lantronix supplied Com Port Redirector™ to eliminate dedicated modems and phone lines. software, Windows device applications not RoHS-compliant, the UDS1100-IAPmeets Directive 2002/95/EC designed for network communications are on the restriction of the use of certain hazardous re-directed to communicate to devices connected to the UDS1100-IAP. substances in electrical and electronic equipment. • Connecting two UDS1100-IAPDevice Servers If you’re looking for a transparent, cost-effective, configured to automatically talk to each other over the network creates virtual serial connections that and scalable means to network-enable your industrial can extend serial communications across a facility automation equipment, look no further than the or around the world. UDS1100-IAP.

UDS1100-IAP Example Configurations SERIAL TUNNELING CONFIGURATION A Ethernet UDS1100-IAP Device Servers Features and Specifications P Serial Interface A Interface:Software-selectable RS232,RS422 or RS485 (2 and 4 I - wire support) 0 0 Connectors:1 DB25F DCE serial port Programmable Logic Controller 1 Data Rates:Software-selectable baud rate from 300 to 230 KBaud (PLC) S1 Characters:7 or 8 data bits Personal Computer (PC) D Parity:odd,even,none U Stop Bits:1 or 2 ™ FColonwtr Cool nSitgronla:lXsO:CNT/SX/ORFTFS ( (SHoaftrwdwaraer)e) OR REDIRDEICRTEOCRT CTOCPN/FIIPG URATION r Network Interface B Ethernet e Interface:10Base-T/100Base-TX Ethernet port v r Software selectable Ethernet speed 10/100/Auto e Software selectable Half/Full/Auto duplex S e Connector:RJ45 UDS1100-IAP c Standards:ARP,UDP,TCP,ICMP,Telnet,TFTP,AutoIP,DHCP,HTTP, Device Server vi SNMP,TCP,UDP,and Telnet,TFTP De Indicators (LED) Personal Computer (PC) l Power,10/100 Link/Activity (green),100/100 a Link/Activity(green),Diagnostics (red),Status (green) i r Processor Programmable Logic Controller st CPU:Lantronix DSTNI-EX 48 MHz clock (PLC) u Memory:256 KB zero wait state SRAM,2 MB Flash d n Management Emissions I Lantronix DeviceInstaller GUI,Serial login,SNMP, FCC Part 15 Subpart B Class A Radiated Emissions 30MHz – 1000MHz Telnet login,HTTP ICES-003 Issue 4 February 2004 Class A Radiated Emissions 30MHz – 1000MHz AS/NZS CISPR 22:2004 Class A Radiated Emissions 30MHz – 1000MHz Power EN55022:1998 + A1:2000 + A2:2003 Class A Radiated Emissions 30MHz – 1000MHz 9-30 VDC or 9-24 VAC on barrel connector (1.5 Watts maximum VCCI V-3/2005.04 Class A Radiated Emissions 30MHz – 1000MHz consumption) EN61000-3-2:2000 Class A Harmonic Current Emissions 9-30 VDC on DB25F serial interface EN61000-3-3:1995 + A1:2001 Fluctuations and Flicker 3.3vdc on serial interface Immunity Environmental EN55024:1998 +A1:2001 +A2:2003 Operating:-40°to 70°C (41°to 158°F) IEC_61000-4-2:1995 ESD 8KV Air Discharge (Direct),4KV Contact Discharge (Direct/Indirect) Storage:-40°to 85°C (-40 to 185°F) IEC_61000-4-3:1995 Radiated Immunity 3.0V/m,1KHz AM Sine Wave at 80% Packaging IEC_61000-4-4:1995 EFT/Burst 1.0KV Power Lines,0.5KV I/O Lines Material:Metal enclosure with integrated wall mounts; IEC_61000-4-5:1995 Surge Immunity 1.0KV Common Mode,1.0 KV Differential Mode optional 35 mm DIN-rail mount available IEC_61000-4-6:1996 Conducted Immunity 3.0 Vrms,80% AM Modulated (1KHz) Dimensions (LxWxH):9.0 x 6.4 x 2.3 cm (3.5 x 2.5 x 0.9 in) IEC_61000-4-8:1993 Magnetic Field Immunity 50Hz 1.0 Arms/m Weight:0.20 kg (0.45 lb) IEC_61000-4-11:1994 Voltage Dips and Interrupts (>95%,0.5 periods),(30%,25 periods),(>95%,250 periods) IP Rating:30 Isolation Agency Approvals Designed with protection against transients and ESD for use under harsh environments. UL,CSA,FCC,CE,TUV,CTick,VCCI Serial Port:15 KV ESD protection on RS232 and RS422/485 transceivers Warranty Power Input:Up to non-repeated 600 W 10/100 usec pulse protection against transient over voltages 2-year limited warranty Ethernet Port:1500 VAC isolation shielded with shield connected to chassis ground for signal integrity and ESD protection Shipping Dimensions Ordering Information Dimensions (LxWxH):242 x 191 x 115 mm (9.5 x 7.5 x 4.5 in) Weight:1.5 kg (3.0 lbs) Part Number Description Included Software UD1100IA2-01 UDS1100-IAPDevice Server, 100-240 VAC International Windows® 98/ME/NT/2000/XP-based DeviceInstaller power supply with regional adapters, includes 500-163 configuration software,Com Port Redirector™software cable and ACDIN1001-01 Din rail mount and related utilities Accessories 500-163 DB25M to DB9F serial cable (included) ACDIN1001-01 Optional DIN-rail mount (included) 500-171-R DB25M to RS485 and power input screw terminal adapter (order separately) 15353 Barranca Parkway | Irvine | CA92618 | USA | Tel: 800.422.7055 | Fax: 949.450.7232 | www.lantronix.com ©2006, Lantronix, Inc. Lantronix is a registered trademark, and Device Server, DeviceInstaller and Com Port Redirector are trademarks of Lantronix, Inc.All other trademarks are the property of their respective owners. Specifications subject to change without notice. All rights reserved. 910-502 09/06 DGS2500