ALUMINUM ELECTROLYTIC CAPACITORS UCJ Chip Type, High Reliability. Low temperature ESR specification. Chip type, high temperature range, for +125°C use. Added ESR specification after the test at –40°C (φ6.3 sizes provide only for the first stage. ) Applicable to automatic mounting machine fed with carrier tape. Compliant to the RoHS directive (2011/65/EU). AEC-Q200 compliant. Please contact us for details. UCZ LLoowng E LSifRe UCJ Aatd d –ed4 0E°SCR specification UUB Specifications Item Performance Characteristics Category Temperature Range –40 to +125°C Rated Voltage Range 10 to 50V Rated Capacitance Range 10 to 470µF Capacitance Tolerance ±20% at 120Hz, 20°C Leakage Current After 1 minute's application of rated voltage at 20°C, leakage current is not more than 0.03CV or 4(µA) , whichever is greater. Measurement frequency : 120Hz at 20°C Tangent of loss angle (tan δ) Rated voltage (V) 10 16 25 35 50 tan δ (MAX.) 0.32 0.24 0.21 0.18 0.18 Measurement frequency : 120Hz Rated voltage (V) 10 16 25 35 50 Stability at Low Temperature Impedance ratio Z–40°C / Z+20°C 12 8 6 4 4 ZT / Z20 (MAX.) The specifications listed at right shall be met when the Capacitance change Within ±30% of the initial capacitance value Endurance capacitors are restored to 20°C after the rated voltage is tan δ 300% or less than the intial specified value applied for 2000 hours at 125°C. Leakage current Less than or equal to the initial specified value After storing the capacitors under no load at 125°C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 Shelf Life clause 4.1 at 20°C, they shall meet the specified values for the endurance characteristics listed above. The capacitors are kept on a hot plate for 30 seconds, Resistance to soldering which is maintained at 250°C. The capacitors shall meet Capacitance change Within ±10% of the initial capacitance value heat the characteristic requirements listed at right when they tan δ Less than or equal to the initial specified value are removed from the plate and restored to 20°C. Leakage current Less than or equal to the initial specified value Marking Black print on the case top. Chip Type Type numbering system (Example : 10V 100µF) (φ6.3) Positive 1 2 3 4 5 6 7 8 9 10 11 12 13 14 Voltage(C : 16V) Series Plastic0 p.3laMtAfoXr.m C±0.2 0.5MAX. U C J 1 A 1 0 1 M C L 1 G S Lot No. A247CCCJapacitance D±0.5φ L±0.3 B±0.2 H A±0.2A±0.2E CRaaptaecdit acnacpea tcoilteCarTnaoacnnpecfiei gn( 1(ug±0r 2ca00otµi%doFen)) 6φ.3D × × 8 L.7 CCodLe Negative 8 × 10 CL Rated voltage (10V) 10 × 10 CL (φ8 , φ10) Plastic platform Positive Series name Voltage(V : 35V) C±0.2 AX. Type 0.3MAX. M Trade mark A2100VCJSeries D±0.5φ B±0.2 0.5A±0.2A±0.2E CABφD × L6.3266 ×... 4668.7 8 288×... 19330 11103 00×(.m 2..1330m) Lot No. Capacitance L±0.5 H E 2.2 3.1 4.5 Voltage Negative L 8.7 10 10 V 10 16 25 35 50 H 0.5 to 0.8 0.8 to 1.1 0.8 to 1.1 Code A C E V H Dimensions V 10 16 25 35 50 Cap.(µF) Code 1A 1C 1E 1V 1H 10 100 6.3 × 8.7 14 - 95 6.3 × 8.7 14 - 95 22 220 6.3 × 8.7 14 - 95 6.3 × 8.7 14 - 95 6.3 × 8.7 14 - 95 33 330 6.3 × 8.7 14 - 95 6.3 × 8.7 14 - 95 8 × 10 2.0 6.0 200 47 470 6.3 × 8.7 14 - 95 6.3 × 8.7 14 - 95 6.3 × 8.7 14 - 95 10 × 10 1.5 4.5 330 100 101 6.3 × 8.7 14 - 95 8 × 10 2.0 6.0 250 8 × 10 2.0 6.0 250 10 × 10 1.5 4.5 400 10 × 10 1.5 4.5 330 220 221 8 × 10 2.0 6.0 250 10 × 10 1.5 4.5 400 10 × 10 1.5 4.5 400 10 × 10 1.5 4.5 400 after Case size InitialenduranceRated 330 331 10 × 10 1.5 4.5 400 10 × 10 1.5 4.5 400 10 × 10 1.5 4.5 400 φD × L test ripple 470 471 10 × 10 1.5 4.5 400 (mm) ESR Max. ESR (Ω) at -40°C 100kHz, Rated ripple current (mArms) at 125°C 100kHz Frequency coefficient of rated ripple current Taping specifications are given in page 23. Frequency 50 Hz 120 Hz 300 Hz 1 kHz 10 kHz or more Recommended land size, soldering by reflow are given in page 18, 19. Coefficient 0.35 0.50 0.64 0.83 1.00 Please refer to page 3 for the minimum order quantity. 150 CAT.8100H

Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: N ichicon: UCJ1V330MCL1GS UCJ1H101MCL1GS UCJ1V221MCL1GS UCJ1A101MCL1GS UCJ1A221MCL1GS UCJ1A331MCL1GS UCJ1A471MCL1GS UCJ1C101MCL1GS UCJ1C221MCL1GS UCJ1C331MCL1GS UCJ1C470MCL1GS UCJ1E101MCL1GS UCJ1E220MCL1GS UCJ1E221MCL1GS UCJ1E330MCL1GS UCJ1E331MCL1GS UCJ1E470MCL1GS UCJ1H100MCL1GS UCJ1H220MCL1GS UCJ1H330MCL1GS UCJ1H470MCL1GS UCJ1V100MCL1GS UCJ1V220MCL1GS UCJ1V101MCL1GS UCH1V470MCL1GS