ALUMINUM  ELECTROLYTIC  CAPACITORS CD Chip Type, Low Impedance series Chip type, low impedance temperature range up to +105C. Designed for surface mounting on high density PC board. Applicable to automatic mounting machine fed with carrier tape. CL Low CD Low UD Impedance Impedance Compliant to the RoHS directive (2011/65/EU). Specifications Item Performance Characteristics Category Temperature Range – 55 to +105°C Rated Voltage Range 6.3 to 100V Rated Capacitance Range 1 to 3300F Capacitance Tolerance ±20% at 120Hz, 20°C Leakage Current After 2 minutes' application of rated voltage, leakage current is not more than 0.01 CV or 3 (µA), whichever is greater. Measurement frequency : 120Hz at 20°C Rated voltage (V) 6.3 10 16 25 35 50 63 80 100 Tangent of loss angle (tan δ) tan δ (MAX.) 0.26 0.19 0.16 0.14 0.12 0.10 0.08 0.08 0.07 For capacitance of more than 1000µF, add 0.02 for every increase of 1000µF. Measurement frequency : 120Hz Rated voltage (V) 6.3 10 16 25 35 50 63 80 100 Stability at Low Temperature Z—25°C / Z+20°C 2 2 2 2 2 2 2 2 2 Impecance ratio Z—40°C / Z+20°C 3 3 3 3 3 3 3 3 3 ZT / Z20 (MAX.) Z—55°C / Z+20°C 4 4 4 3 3 3 3 3 3 Capacitance Change Within ± 30% of the initial capacitance value The specifications listed at right shall be met when the Endurance capacitors are restored to 20°C after the rated voltage is tan δ 200% or less than the initial specified value applied for 5000 hours (2000 hours for L 10 mm: 50V 300% or less than the initial specified value for 63V or more or less, and for L 10mm: 63V or more) at 105°C. Leakage current Less than or equal to the initial specified value After storing the capacitors under no load at 105°C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause 4.1 at Shelf Life 20°C, they shall meet the specified values for the endurance characteristics listed above. The capacitors are kept on a hot plate for 30 seconds, which is Capacitance Change Within ± 10% of the initial capacitance value Resistance to soldering maintained at 250°C. The capacitors shall meet the characteristic tan δ Less than or equal to the initial specified value heat requirements listed at right when they are removed from the plate and restored to 20°C. Leakage current Less than or equal to the initial specified value Marking Black print on the case top. Chip Type Type numbering system (Example : 16V 100µF) (φ4 to φ8 × φ6.2) Positive 1 2 3 4 5 6 7 8 9 10 11 12 13 14 Plastic platform X. U C D 1 C 1 0 1 M C L 1 G S Voltage (j : 6.3V) Series 0.3MAX. C±0.2 MA Package code 1Trade mark 0.5 Size Package Code 2 0. φ4 to 10 Taping GS A247jCD D±0.5φ B±0.2 E ±0.2A± φφ1122..55 ttoo 1188 TaTrpainygSizeMZ DcSode A Lot No. Capacitance L±0.3 H Negative Configuration 1: Size φ8 × 6.2 only Capacitance tolerance (±20%) φ D Code (φ8 × 10, φ10) Positive Rated capacitance (100μF) 4 to 6.3 CL Plastic platform X. Rated voltage (16V) 8 (6.2L) CL TVroaltdaeg em (aErk : 25V) Series 0.3MAX. C±0.2 5MA Series name 18 0(1(70.L7)L•) CL 0. 2 Type 10(10L,13.5L) NL A2220ECD D±0.5φ B±0.2 E 0.2A±0. φ D × L 4 × 5.8 5 × 5.8 6.3 × 5.8 6.3 × 7.7 8 × 6.2 8 × 10 10 × 7.712.510 t o× 1108 (mNmQ) Pressure 2 A± A 1.8 2.1 2.4 2.4 3.3 2.9 3.2 3.2 relief vent L±0.5 Negative B 4.3 5.3 6.6 6.6 8.3 8.3 10.3 10.3 Lot No. Capacitance H C 4.3 5.3 6.6 6.6 8.3 8.3 10.3 10.3 2 : Except : φ10 × 7.7L Positive E 1.0 1.3 2.2 2.2 2.3 3.1 4.5 4.5 (φ12.5 to φ18) Plastic platform X. L 5.8 5.8 5.8 7.7 6.2 10 7.7 10 Trade mark Voltage 0.3MAX. C±0.2 MA H 0.5 to 0.80.5 to 0.80.5 to 0.80.5 to 0.80.5 to 0.80.8 to 1.10.8 to 1.10.8 to 1.1 Lot No. 0.5 2 φ D × L10 × 13.512.5 × 13.516 × 16.518 × 16.5 nichicon330 µFCD 50VH1015 D±0.5φ B±0.2 E A±0.2A±0. CABE 113400..2..533 114433..8..066 115677..4..311 116699..4..311 Capacitance Series Prerleiesfs vuerent L±1.0 H Negative HL 0.81 3to.5 1.11.01 3to.5 1.41.01 6to.5 1.41.01 6to.5 1.4 Voltage φ8 × 10L, φ10 × 10L, φ12.5 × 13.5L, φ16 × 16.5L, φ18 × 16.5L : The vibration structure-resistant product is also available upon request, please ask for details. V 6.3 10 16 25 35 50 63 80 100 Code j A C E V H J K 2A Dimension table in next page. CAT.8100D

ALUMINUM  ELECTROLYTIC  CAPACITORS CD series Dimensions V 6.3 10 16 25 35 50 Cap. (µF) Code 0J 1A 1C 1E 1V 1H 1 010 4 × 5.8 2.70 60 2.2 2R2 4 × 5.8 2.70 60 3.3 3R3 4 × 5.8 2.70 60 4.7 4R7 4 × 5.8 1.35 90 4 × 5.8 2.70 60 4 × 5.8 1.35 90 5 × 5.8 1.50 90 10 100 4 × 5.8 1.35 90 4 × 5.8 1.35 90 5 × 5.8 0.70 160 6.3 × 5.8 0.86 170 15 150 4 × 5.8 1.35 90 5 × 5.8 0.70 160 4 × 5.8 1.35 90 22 220 4 × 5.8 1.35 90 4 × 5.8 1.35 90 5 × 5.8 0.70 160 5 × 5.8 0.70 160 6.3 × 5.8 0.86 170 5 × 5.8 0.70 160 27 270 4 × 5.8 1.35 90 5 × 5.8 0.70 160 5 × 5.8 0.70 160 6.3 × 5.8 0.36 240 4 × 5.8 1.35 90 5 × 5.8 0.70 160 6.3 × 7.7 0.66 195 33 330 5 × 5.8 0.70 160 6.3 × 5.8 0.36 240 6.3 × 5.8 0.36 240 5 × 5.8 0.70 160 6.3 × 5.8 0.36 240 8 × 6.2 0.63 200 4 × 5.8 1.35 90 5 × 5.8 0.70 160 6.3 × 7.7 0.66 195 47 470 6.3 × 5.8 0.36 240 6.3 × 5.8 0.36 240 6.3 × 5.8 0.36 240 5 × 5.8 0.70 160 6.3 × 5.8 0.36 240 8 × 6.2 0.63 200 56 560 5 × 5.8 0.70 160 6.3 × 5.8 0.36 240 6.3 × 5.8 0.36 240 6.3 × 5.8 0.36 240 68 680 6.3 × 5.8 0.36 240 6.3 × 5.8 0.36 240 6.3 × 5.8 0.36 240 6.3 × 5.8 0.36 240 6.3 × 7.7 0.32 290 5 × 5.8 0.70 160 6.3 × 7.7 0.32 290 6.3 × 7.7 0 .32 290 8 × 10 0.32 350 100 101 6.3 × 5.8 0.36 240 6.3 × 5.8 0.36 240 6.3 × 5.8 0.36 240 8 × 6.2 0.26 300 8 × 10 0.16 600 10 × 7.7 0.36 330 8 × 10 0.16 600 8 × 10 0.16 600 150 151 6.3 × 5.8 0.36 240 6.3 × 5.8 0.36 240 6.3 × 7.7 0.32 290 10 × 10 0.16 700 10 × 7.7 0.18 600 10 × 7.7 0.18 600 6.3 × 7.7 0.32 290 6.3 × 7.7 0.32 290 8 × 10 0.16 600 8 × 10 0.16 600 220 221 6.3 × 5.8 0.36 240 10 × 10 0.16 700 8 × 6.2 0.26 300 8 × 6.2 0.26 300 10 × 7.7 0.18 600 10 × 7.7 0.18 600 6.3 × 7.7 0.32 290 8 × 10 0.16 600 8 × 10 0.16 600 10 × 13.5 0.14 800 330 331 8 × 10 0.16 600 10 × 10 0.08 850 8 × 6.2 0.26 300 10 × 7.7 0.18 600 10 × 7.7　 0.18 600 12.5 × 13.5 0.12 900 390 391 12.5 × 13.5 0.12 900 8 × 10 0.16 600 8 × 10 0.16 600 8 × 10 0.16 600 10 × 13.5 0.08 950 470 471 10 × 10 0.08 850 16 × 16.5 0.073 1610 10 × 7.7 0.18 600 10 × 7.7 0.18 600 10 × 7.7　 0.18 600 12.5 × 13.5 0.08 1100 8 × 10 0.16 600 680 681 10 × 10 0.08 850 10 × 10 0.08 850 10 × 13.5 0.08 950 12.5 × 13.5 0.08 1100 16 × 16.5 0.073 1610 10 × 7.7 0.18 600 1000 102 8 × 10 0.16 600 10 × 10 0.08 850 10 × 13.5 0.08 950 12.5 × 13.5 0.08 1100 16 × 16.5 0.035 1800 1500 152 10 × 10 0.08 850 10 × 13.5 0.08 950 12.5 × 13.5 0.08 1100 2200 222 10 × 13.5 0.08 950 12.5 × 13.5 0.08 1100 16 × 16.5 0.035 1800 Case size Rated φD × L Impedance ripple 3300 332 12.5 × 13.5 0.08 1100 (mm) V 63 80 100 Cap. (µF) Code 1J 1K 2A 3.3 3R3 5 × 5.8 5.00 25 4.7 4R7 5 × 5.8 3.00 50 6.3 × 5.8 3.00 40 6.3 × 7.7 2.40 60 10 100 6.3 × 5.8 1.50 80 8 × 6.2 2.40 60 6.3 × 7.7 1.20 120 22 220 8 × 10 1.30 130 8 × 10 1.30 130 8 × 6.2 1.20 120 33 330 8 × 10 0.65 250 8 × 10 1.30 130 10 × 10 0.70 200 47 470 8 × 10 0.65 250 10 × 10 0.70 200 12.5 × 13.5 0.32 500 68 680 10 × 10 0.35 400 12.5 × 13.5 0.32 500 12.5 × 13.5 0.32 500 100 101 10 × 10 0.35 400 12.5 × 13.5 0.32 500 16 × 16.5 0.17 793 150 151 12.5 × 13.5 0.16 800 12.5 × 13.5 0.32 500 16 × 16.5 0.17 793 220 221 12.5 × 13.5 0.16 800 18 × 16.5 0.15 917 330 331 16 × 16.5 0.17 793 18 × 16.5 0.15 917 467800 467811 1168 ×× 1166..55 00.0.0882 11461900 18 × 16.5 0.15 917 Cφa(Dsme ×m s L)iz e Impedance Rripapteled Max. Impedance (Ω) at 20°C 100kHz, Rated ripple current (mArms) at 105°C 100kHz : In this case, 6 will be put at 12th digit of type numbering system. Taping specifications are given in page 23. Recommended land size, soldering by refrow are given Frequency coefficient of rated ripple current in page 18, 19. Frequency 50Hz 120Hz 300Hz 1kHz 10kHz or more Please refer to page 3 for the minimum order quantity. Coefficient 0.35 0.50 0.64 0.83 1.00 CAT.8100D

Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: N ichicon: UCD0J101MCL6GS UCD0J331MCL6GS UCD0J470MCL6GS UCD1A221MCL6GS UCD1A330MCL6GS UCD1C220MCL6GS UCD1C221MCL6GS UCD1C470MCL6GS UCD1E101MCL6GS UCD1E330MCL6GS UCD1H100MCL6GS UCD1H330MCL6GS UCD1H470MCL6GS UCD1J220MCL6GS UCD1K100MCL6GS UCD1V100MCL6GS UCD1V101MCL6GS UCD0J101MCL1GS UCD0J102MNL1GS UCD0J152MNL1GS UCD0J220MCL1GS UCD0J221MCL1GS UCD0J331MCL1GS UCD0J470MCL1GS UCD0J471MNL1GS UCD1A102MNL1GS UCD1A151MCL1GS UCD1A220MCL1GS UCD1A221MCL1GS UCD1A330MCL1GS UCD1A331MNL1GS UCD1A471MNL1GS UCD1A681MNL1GS UCD1C100MCL1GS UCD1C101MCL1GS UCD1C151MCL1GS UCD1C220MCL1GS UCD1C221MCL1GS UCD1C331MNL1GS UCD1C470MCL1GS UCD1C471MNL1GS UCD1C681MNL1GS UCD1E100MCL1GS UCD1E101MCL1GS UCD1E151MNL1GS UCD1E220MCL1GS UCD1E221MNL1GS UCD1E330MCL1GS UCD1E331MNL1GS UCD1E470MCL1GS UCD1E471MNL1GS UCD1E680MCL1GS UCD1H100MCL1GS UCD1H101MNL1GS UCD1H151MNL1GS UCD1H220MCL1GS UCD1H221MNL1GS UCD1H330MCL1GS UCD1H4R7MCL1GS UCD1H470MCL1GS UCD1J100MCL1GS UCD1J101MNL1GS UCD1J220MCL1GS UCD1J330MNL1GS UCD1J4R7MCL1GS UCD1J470MNL1GS UCD1J680MNL1GS UCD1K100MCL1GS UCD1K220MNL1GS UCD1K3R3MCL1GS UCD1K330MNL1GS UCD1K4R7MCL1GS UCD1K470MNL1GS UCD1V100MCL1GS UCD1V101MNL1GS UCD1V151MNL1GS UCD1V220MCL1GS UCD1V221MNL1GS UCD1V330MCL1GS UCD1V331MNL1GS UCD1V4R7MCL1GS UCD1V470MCL1GS UCD1V471MNQ1MS UCD1V680MCL1GS UCD1V681MNQ1MS UCD2A101MNQ1MS UCD2A151MNQ1MS UCD2A220MNL1GS UCD2A221MNQ1MS UCD2A330MNL1GS UCD2A331MNQ1MS UCD2A470MNQ1MS UCD2A680MNQ1MS UCD1H681MNQ1MS UCD1E102MNQ1MS UCD1E222MNQ1MS UCD1H331MNQ1MS UCD1H471MNQ1MS UCD1J471MNQ1MS UCD1J221MNQ1MS