ALUMINUM ELECTROLYTIC CAPACITORS UBT High Temperature Range, For +125°C Use Highly dependable reliability withstanding load life of 2000 to 10000 hours at +125°C. Suited for automobile electronics where heavy duty services are indispensable. Compliant to the RoHS directive (2011/65/EU). AEC-Q200 compliant. Please contact us for details. UBW High Temperature UBT Higher UBY Specifications Capacitance Item Performance Characteristics Category Temperature Range –40 to +125°C (10 to 250V), –25 to +125°C (350 to 450V) Rated Voltage Range 10 to 450V Rated Capacitance Range 4.7 to 4700µF Capacitance Tolerance ±20% at 120Hz, 20°C Rated Voltage (V) 10 to 100 160 to 450 Leakage Current After 1 minute's application of rated voltage at 20°C, leakage CV <= 1000 : I = 0.1CV+40 (µA) max. Leakage current current is not more than 0.03CV or 4 (µA), whichever is greater. CV > 1000 : I = 0.04CV+100 (µA) max. Rated voltage (V) 10 16 25 35 50 63 80 100 160 to 250350 to 450 120Hz, 20°C Tangent of loss angle (tan δ) tan δ (MAX.) 0.20 0.16 0.14 0.12 0.10 0.10 0.08 0.08 0.20 0.24 For capacitance of more than 1000µF, add 0.02 for every increase of 1000µF. 120Hz Rated voltage (V) 10 16 25 35 50 63 80 100 160 to 250350 to 450 Stability at Low Temperature Impedance ratio Z–25°C / Z+20°C 3 2 2 2 2 2 2 2 3 6 ZT / Z20 (MAX.) Z–40°C / Z+20°C 4 4 4 4 4 4 4 4 6 – The specifications listed at right shall be met when the capacitors are restored to 20˚C after D.C. bias plus Within ±30% of the initial capacitance value (10 to 100V) rated ripple current is applied for less than 50V (φD = Capacitance change Within ±20% of the initial capacitance value (160 to 450V) 8 : 2000 hours, φD = 10 : 5000 hours, φD => 12.5 : Endurance 300% or less than the initial specified value (10 to 100V) 10000 hours), 63 to 100V (φD = 8 : 2000 hours, φD = tan δ 200% or less than the initial specified value (160 to 450V) 10 : 3000 hours, φD => 12.5 : 5000 hours), more than 160V (2000 hours) at 125˚C, the peak voltage shall Leakage current Less than or equal to the initial specified value not exceed the rated voltage. After storing the capacitors under no load at 125˚C for 1000 hours and then performing voltage treatment based on JIS C Shelf Life 5101-4 clause 4.1 at 20°C, they shall meet the specified values for the endurance characteristics listed above. Marking Printed with white color letter on blue sleeve. Radial Lead Type Type numbering system (Example : 10V 220µF) Sleeve (P.E.T) or Sleeve (polyolefin) φd 1 2 3 4 5 6 7 8 9 10 11 12 U B T 1 A 2 2 1 M P D 8 + MAX.D ±0.5P φ Pressure relief vent L+2MAX. 15MIN 4MIN polyolefin sleeve product is also available upon request. Configuration Standard type Semi-standard type (mm) φD 8 10 12.5 16 18 φ D PPbb--ffrreeee lPeEadTw silreeeve PPbb--ffrreeee Pleoaldywolierefin sleeve 0.8 0.8 1.0 1.0 1.0 8,10 PD8 PD P 3.5 5.0 5.0 7.5 7.5 12.5 to 18 HD8 HD φd 0.6 0.6 0.6 0.8 0.8 • Please refer to page 20 about the end seal configuration. Please refer to page 20, 21, 22 about the formed or taped product spec. Please refer to page 4 for the minimum order quantity. Dimension table in next page. 256 CAT.8100H

ALUMINUM ELECTROLYTIC CAPACITORS UBT Dimensions V (Code) 10 (1A) 16 (1C) 25 (1E) 35 (1V) 50 (1H) Item Case size Impedance Rated Case size Impedance Rated Case size Impedance Rated Case size Impedance Rated Case size Impedance Rated C (µaFp.). Code φ(Dm m× )L (Ω) MAX. (mriApprmles ) φ(Dm m× )L (Ω) MAX. (mriApprmles ) φ(Dm m× )L (Ω) MAX. (mriApprmles ) φ(Dm m× )L (Ω) MAX. (mriApprmles ) φ(Dm m× )L (Ω) MAX. (mriApprmles ) 4.7 4R7 8 × 11.5 1.15 85 10 100 8 × 11.5 0.75 180 22 220 8 × 11.5 0.50 250 33 330 8 × 11.5 0.45 300 47 470 8 × 11.5 0.35 440 100 101 8 × 11.5 0.32 340 8 × 11.5 0.13 500 10 × 12.5 0.15 620 10 × 12.5 0.18 555 220 221 8 × 11.5 0.26 340 10 × 12.5 0.15 620 10 × 12.5 0.10 680 10 × 16 0.094 790 10 × 20 0.098 930 330 331 10 × 12.5 0.15 620 10 × 12.5 0.10 680 10 × 16 0.075 945 10 × 20 0.075 950 12.5 × 20 0.070 1330 470 471 10 × 12.5 0.10 680 10 × 16 0.075 945 10 × 20 0.057 1100 12.5 × 20 0.058 1330 12.5 × 25 0.055 1650 1000 102 10 × 20 0.057 1100 12.5 × 20 0.042 1490 12.5 × 25 0.033 1750 16 × 25 0.031 2010 16 × 31.5 0.031 2430 2200 222 12.5 × 25 0.033 1750 16 × 25 0.024 2300 16 × 31.5 0.020 2710 18 × 35.5 0.025 2790 3300 332 16 × 25 0.024 2300 16 × 31.5 0.020 2710 18 × 31.5 0.017 3310 4700 472 16 × 31.5 0.020 2710 18 × 31.5 0.018 3270 V(Code) 63 (1J) 80 (1K) 100 (2A) Item Case size Impedance Rated Case size Impedance Rated Case size Impedance Rated C (µaFp.). Code φ(Dm m× )L (Ω) MAX. (mriApprmles ) φ(Dm m× )L (Ω) MAX. (mriApprmles ) φ(Dm m× )L (Ω) MAX. (mriApprmles ) 10 100 8 × 11.5 1.50 150 22 220 8 × 11.5 2.00 130 8 × 11.5 1.50 150 10 × 12.5 0.80 480 33 330 8 × 11.5 1.50 150 10 × 12.5 0.80 480 10 × 12.5 0.80 480 47 470 10 × 12.5 0.59 530 10 × 12.5 0.80 480 10 × 16 0.55 630 100 101 10 × 16 0.41 690 10 × 20 0.39 790 12.5 × 20 0.25 990 220 221 12.5 × 20 0.16 1050 12.5 × 25 0.18 1240 16 × 25 0.11 1500 330 331 12.5 × 25 0.12 1290 12.5 × 31.5 0.16 1390 16 × 31.5 0.079 1790 470 471 12.5 × 31.5 0.097 1460 16 × 25 0.11 1500 Rated ripple current (mArms) at 125°C 100kHz Impedance (Ω) MAX. at 20°C 100kHz Frequency coefficient of rated ripple current V CV Frequency 120Hz 300Hz 1kHz 10kHz or more 1000 > CV 0.50 0.64 0.83 1.00 10 to 100 1000 CV 0.67 0.79 0.91 1.00 V(Code) 160 (2C) 200 (2D) 250 (2E) 350 (2V) 400 (2G) 450 (2W) Item Case size Rated Case size Rated Case size Rated Case size Rated Case size Rated Case size Rated φD × L ripple φD × L ripple φD × L ripple φD × L ripple φD × L ripple φD × L ripple Cap. Code (mm) (mArms) (mm) (mArms) (mm) (mArms) (mm) (mArms) (mm) (mArms) (mm) (mArms) 4.7 4R7 10 × 20 153 10 × 20 153 10 × 25 158 10 100 10 × 20 178 10 × 20 178 10 × 25 185 10 × 25 186 12.5 × 20 186 22 220 10 × 20 115 10 × 25 126 12.5 × 20 128 12.5 × 25 139 12.5 × 31.5 142 16 × 25 154 33 330 10 × 25 154 12.5 × 20 157 12.5 × 25 171 16 × 25 189 16 × 25 189 16 × 31.5 203 47 470 12.5 × 20 187 12.5 × 25 204 16 × 25 225 16 × 31.5 243 16 × 31.5 243 68 680 12.5 × 25 245 16 × 20 250 16 × 31.5 292 100 101 16 × 25 329 16 × 25 329 150 151 16 × 31.5 434 Rated ripple current (mArms) at 125°C 120Hz Frequency coefficient of rated ripple current V Cap . (µF) Frequency 50Hz 120Hz 300Hz 1kHz 10kHz 100kHz or more 4.7 to 330 0.75 1.00 1.25 1.50 1.75 1.80 160 to 450 .47 to 150 0.80 1.00 1.15 1.30 1.40 1.50 257 CAT.8100H

Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: N ichicon: UBT1C332MHD UBT1C471MPD UBT1C472MHD UBT1E101MPD UBT1H330MPD UBT1H331MHD UBT1H3R3MPD UBT1K221MHD UBT1K330MPD UBT1K331MHD UBT1K470MPD UBT1K471MHD UBT1C102MHD UBT1C221MPD UBT1C222MHD UBT1C331MPD UBT1H102MHD UBT1H220MPD UBT1H221MPD UBT1H2R2MPD UBT1A331MPD UBT1A332MHD UBT1A471MPD UBT1A472MHD UBT1C101MPD UBT1E471MPD UBT1H010MPD UBT1H100MPD UBT1H101MPD UBT1J220MPD UBT1J221MHD UBT1J330MPD UBT1J331MHD UBT1A102MPD UBT1A221MPD UBT1A222MHD UBT1E102MHD UBT1E221MPD UBT1E222MHD UBT1E331MPD UBT1E332MHD UBT1H470MPD UBT1H471MHD UBT1H4R7MPD UBT1J101MPD UBT1K471MHD1TN UBT1V101MPD UBT1V102MHD UBT1V221MPD UBT1V222MHD UBT2A4R7MPD UBT2C101MHD UBT2C151MHD UBT2C220MPD UBT2G220MHD UBT2G330MHD UBT2G470MHD UBT1J470MPD UBT1J471MHD UBT1K101MPD UBT1K220MPD UBT2A220MPD UBT2A221MHD UBT2A330MPD UBT2A331MHD UBT2A470MPD UBT2E100MPD UBT2E220MHD UBT2E330MHD UBT2E470MHD UBT2E680MHD UBT1V331MPD UBT1V471MHD UBT2A100MPD UBT2A101MHD UBT2D220MPD UBT2D330MHD UBT2D470MHD UBT2D680MHD UBT2V4R7MPD UBT2W100MHD UBT2W220MHD UBT2W330MHD UBT2W4R7MPD UBT2C330MPD UBT2C470MHD UBT2C680MHD UBT2D100MPD UBT2D101MHD UBT2G4R7MPD UBT2V100MPD UBT2V220MHD UBT2V330MHD UBT2V470MHD UBT1V470MPD UBT1E470MPD UBT2A100MHD UBT1H100MPD1TD UBT1A221MPD1TD UBT2A221MHD8