Product Sample & Technical Tools & Support & Folder Buy Documents Software Community UA78L02A,UA78L05,UA78L05A,UA78L06A UA78L08A,UA78L09A,UA78L10A,UA78L12A,UA78L15A SLVS010V–JANUARY1976–REVISEDNOVEMBER2016 UA78L00 Series Positive-Voltage Linear Regulators 1 Features 3 Description • 3-TerminalLinearRegulators The UA78L00 series of fixed-voltage linear regulators 1 is designed for a wide range of applications. These • OutputCurrentUpto100mA applications include on-card regulation for elimination • NoExternalComponents of noise and distribution problems associated with • InternalThermal-OverloadProtection single-point regulation as well as for voltage regulation in major appliances. In addition, they can • InternalShort-CircuitCurrentLimiting be used with power-pass elements to make high- current voltage regulators. One of these regulators 2 Applications can deliver up to 100 mA of output current. The • ComputingandServers internal limiting and thermal-shutdown features of these regulators help to protect the device from • On-CardRegulation overload. • Telecommunications The UA78L00C and UA78L00AC series devices are • WhiteGoods characterized for operation over the virtual junction • ChemicalorGasSensors temperature range of 0°C to 125°C. The UA78L05AI • FieldTransmitter:TemperatureSensors device is characterized for operation over the virtual junctiontemperaturerangeof−40°Cto125°C. • FlowMeters DeviceInformation(1) PARTNUMBER PACKAGE BODYSIZE(NOM) UA78L00D, SOIC(8) 4.90mm×3.91mm UA78L00AD UA78L00LP, TO-92(3) 4.30mm×4.30mm UA78L00ALP UA78L00PK, SOT-89(3) 4.50mm×2.50mm UA78L00APK (1) For all available packages, see the orderable addendum at theendofthedatasheet. SimplifiedSchematic UA78L00 V INPUT OUTPUT V I O 0.33 (cid:29)F COMMON 0.1 (cid:29)F Copyright ' 2016, Texas Instruments Incorporated 1 An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications, intellectualpropertymattersandotherimportantdisclaimers.PRODUCTIONDATA.

UA78L02A,UA78L05,UA78L05A,UA78L06A UA78L08A,UA78L09A,UA78L10A,UA78L12A,UA78L15A SLVS010V–JANUARY1976–REVISEDNOVEMBER2016 www.ti.com Table of Contents 1 Features.................................................................. 1 7.1 Overview.................................................................10 2 Applications........................................................... 1 7.2 FunctionalBlockDiagram.......................................10 3 Description............................................................. 1 7.3 FeatureDescription.................................................10 7.4 DeviceFunctionalModes........................................10 4 RevisionHistory..................................................... 2 8 ApplicationsandImplementation...................... 11 5 PinConfigurationandFunctions......................... 3 8.1 ApplicationInformation............................................11 6 Specifications......................................................... 4 8.2 TypicalApplication .................................................11 6.1 AbsoluteMaximumRatings......................................4 8.3 SystemExamples...................................................12 6.2 ESDRatings..............................................................4 9 PowerSupplyRecommendations...................... 13 6.3 RecommendedOperatingConditions.......................4 10 Layout................................................................... 13 6.4 ThermalInformation..................................................4 6.5 ElectricalCharacteristics:UA78L02..........................5 10.1 LayoutGuidelines.................................................13 6.6 ElectricalCharacteristics:UA78L05..........................5 10.2 LayoutExample....................................................13 6.7 ElectricalCharacteristics:UA78L06..........................6 11 DeviceandDocumentationSupport................. 14 6.8 ElectricalCharacteristics:UA78L08..........................6 11.1 RelatedLinks........................................................14 6.9 ElectricalCharacteristics:UA78L09..........................7 11.2 ReceivingNotificationofDocumentationUpdates14 6.10 ElectricalCharacteristics:UA78L10........................7 11.3 CommunityResource............................................14 6.11 ElectricalCharacteristics:UA78L12........................8 11.4 Trademarks...........................................................14 6.12 ElectricalCharacteristics:UA78L15........................8 11.5 ElectrostaticDischargeCaution............................14 6.13 TypicalCharacteristics............................................9 11.6 Glossary................................................................14 7 DetailedDescription............................................ 10 12 Mechanical,Packaging,andOrderable Information........................................................... 14 4 Revision History NOTE:Pagenumbersforpreviousrevisionsmaydifferfrompagenumbersinthecurrentversion. ChangesfromRevisionU(January2014)toRevisionV Page • AddedDeviceInformationtable,ESDRatingstable,FeatureDescriptionsection,DeviceFunctionalModes, ApplicationandImplementationsection,PowerSupplyRecommendationssection,Layoutsection,Deviceand DocumentationSupportsection,andMechanical,Packaging,andOrderableInformationsection....................................... 1 • AddedApplications................................................................................................................................................................. 1 • Changedθ valuesinThermalInformationtableFrom:97To:115(D),From:140To:143.6(LP),andFrom:52To: JA 54.7(PK)................................................................................................................................................................................. 4 • Changedθ valuesinThermalInformationtableFrom:39To:60.3(D),From:55To:74.4(LP),andFrom:9To: JC 88.1(PK)................................................................................................................................................................................. 4 ChangesfromRevisionT(May2011)toRevisionU Page • DeletedOrderingInformationtable;seeProductOptionAddendumattheendofthedatasheet........................................ 1 • UpdateddocumenttonewTIdatasheetformat-nospecificationchanges......................................................................... 1 2 SubmitDocumentationFeedback Copyright©1976–2016,TexasInstrumentsIncorporated ProductFolderLinks:UA78L02A UA78L05 UA78L05A UA78L06AUA78L08A UA78L09A UA78L10A UA78L12A UA78L15A

UA78L02A,UA78L05,UA78L05A,UA78L06A UA78L08A,UA78L09A,UA78L10A,UA78L12A,UA78L15A www.ti.com SLVS010V–JANUARY1976–REVISEDNOVEMBER2016 5 Pin Configuration and Functions DPackage 8-PinSOIC LPPackage TopView 3-PinTO-92 TopView INPUT OUTPUT 1 8 INPUT COMMON COMMON 2 7 COMMON OUTPUT COMMON 3 6 COMMON NC 4 5 NC Not to scale PKPackage 3-PinSOT-89 TopView INPUT COMMON OUTPUT PinFunctions PIN I/O DESCRIPTION NAME SOIC TO-92 SOT-89 COMMON 2,3,6,7 2 2 — Ground INPUT 8 3 3 I Supplyinput OUTPUT 1 1 1 O Voltageoutput NC 4,5 — — — Nointernalconnection Copyright©1976–2016,TexasInstrumentsIncorporated SubmitDocumentationFeedback 3 ProductFolderLinks:UA78L02A UA78L05 UA78L05A UA78L06AUA78L08A UA78L09A UA78L10A UA78L12A UA78L15A

UA78L02A,UA78L05,UA78L05A,UA78L06A UA78L08A,UA78L09A,UA78L10A,UA78L12A,UA78L15A SLVS010V–JANUARY1976–REVISEDNOVEMBER2016 www.ti.com 6 Specifications 6.1 Absolute Maximum Ratings overoperatingfree-airtemperaturerange(unlessotherwisenoted)(1) MIN MAX UNIT UA78L02AC,UA78L05C,UA78L09C,andUA78L10AC 30 Inputvoltage,V V I UA78L12C,UA78L12AC,UA78L15C,andUA78L15AC 35 Virtualjunctiontemperature,T 150 °C J Storagetemperature,T –65 150 °C stg (1) StressesbeyondthoselistedunderAbsoluteMaximumRatingsmaycausepermanentdamagetothedevice.Thesearestressratings only,andfunctionaloperationofthedeviceattheseoranyotherconditionsbeyondthoseindicatedunderRecommendedOperating Conditionsisnotimplied.Exposuretoabsolute-maximum-ratedconditionsforextendedperiodsmayaffectdevicereliability. 6.2 ESD Ratings VALUE UNIT Humanbodymodel(HBM),perANSI/ESDA/JEDECJS-001,allpins(1) 1000 V(ESD) Electrostaticdischarge Chargeddevicemodel(CDM),perJEDECspecificationJESD22-C101,all V pins(2) 1000 (1) JEDECdocumentJEP155statesthat500-VHBMallowssafemanufacturingwithastandardESDcontrolprocess. (2) JEDECdocumentJEP157statesthat250-VCDMallowssafemanufacturingwithastandardESDcontrolprocess. 6.3 Recommended Operating Conditions MIN MAX UNIT UA78L02AC 4.75 20 UA78L05CandUA78L05AC 7 20 UA78L06CandUA78L06AC 8.5 20 UA78L08CandUA78L08AC 10.5 23 V Inputvoltage V I UA78L09CandUA78L09AC 11.5 24 UA78L10AC 12.5 25 UA78L12CandUA78L12AC 14.5 27 UA78L15CandUA78L15AC 17.5 30 I Outputcurrent 100 mA O UA78L00CandUA78L00ACseries 0 125 T Operatingvirtualjunctiontemperature °C J UA78L05AI –40 125 6.4 Thermal Information UA78L00 THERMALMETRIC(1) D(SOIC) LP(TO-92) PK(SOT-89) UNIT 8PINS 3PINS 3PINS R Junction-to-ambientthermalresistance 115 143.6 54.7 °C/W θJA R Junction-to-case(top)thermalresistance 60.3 74.4 88.1 °C/W θJC(top) R Junction-to-boardthermalresistance 55.6 — 9.6 °C/W θJB ψ Junction-to-topcharacterizationparameter 16.2 24.2 6.2 °C/W JT ψ Junction-to-boardcharacterizationparameter 55 120.9 9.7 °C/W JB R Junction-to-case(bottom)thermalresistance — — 7.7 °C/W θJC(bot) (1) Formoreinformationabouttraditionalandnewthermalmetrics,seetheSemiconductorandICPackageThermalMetricsapplication report. 4 SubmitDocumentationFeedback Copyright©1976–2016,TexasInstrumentsIncorporated ProductFolderLinks:UA78L02A UA78L05 UA78L05A UA78L06AUA78L08A UA78L09A UA78L10A UA78L12A UA78L15A

UA78L02A,UA78L05,UA78L05A,UA78L06A UA78L08A,UA78L09A,UA78L10A,UA78L12A,UA78L15A www.ti.com SLVS010V–JANUARY1976–REVISEDNOVEMBER2016 6.5 Electrical Characteristics: UA78L02 atspecifiedvirtualjunctiontemperature,V =9V,andI =40mA(unlessotherwisenoted)(1) I O PARAMETER TESTCONDITIONS(2) MIN TYP MAX UNIT T =25°C 2.5 2.6 2.7 J V =4.75Vto20V,andI =1mAto40mA I O Outputvoltagef T =0°Cto125°C 2.45 2.75 V J I =1mAto70mA,andT =0°Cto125°C 2.45 2.75 O J V =4.75Vto20V,andT =25°C 20 100 I J Inputvoltageregulation mV V =5Vto20V,andT =25°C 16 75 I J Ripplerejection V =6Vto20V,f=120Hz,andT =25°C 43 51 dB I J I =1mAto100mA,andT =25°C 12 50 O J Outputvoltageregulation mV I =1mAto40mA,andT =25°C 6 25 O J Outputnoisevoltage f=10Hzto100kHz,andT =25°C 30 µV J Dropoutvoltage T =25°C 1.7 V J T =25°C 3.6 6 J Biascurrent mA T =125°C 5.5 J V =5Vto20V,andT =0°Cto125°C 2.5 I J Biascurrentchange mA I =1mAto40mA,andT =0°Cto125°C 0.1 O J (1) AppliestoUA78L02AC. (2) Pulse-testingtechniquesmaintainT asclosetoT aspossible.Thermaleffectsmustbetakenintoaccountseparately.All J A characteristicsaremeasuredwitha0.33-µFcapacitoracrosstheinputanda0.1-µFcapacitoracrosstheoutput. 6.6 Electrical Characteristics: UA78L05 atspecifiedvirtualjunctiontemperature,V =10V,andI =40mA(unlessotherwisenoted) I O PARAMETER TESTCONDITIONS(1) MIN TYP MAX UNIT UA78L05C 4.6 5 5.4 TJ=25°C UA78L05ACand 4.8 5 5.2 V =7Vto20V,and UA78L05AI I IO=1mAto40mA UA78L05C 4.5 5.5 Outputvoltage V TJ=fullrange UA78L05ACand 4.75 5.25 UA78L05AI I =1mAto70mA,and UA78L05C 4.5 5.5 O TJ=fullrange UA78L05ACandUA78L05AI 4.75 5.25 V =7Vto20V,and UA78L05C 32 200 I Inputvoltage TJ=25°C UA78L05ACandUA78L05AI 32 150 mV regulation V =8Vto20V,and UA78L05C 26 150 I TJ=25°C UA78L05ACandUA78L05AI 26 100 V =8Vto18V,f=120Hz, UA78L05C 40 49 Ripplerejection I dB andTJ=25°C UA78L05ACandUA78L05AI 41 49 Outputvoltage IO=1mAto100mA,andTJ=25°C 15 60 mV regulation I =1mAto40mA,andT =25°C 8 30 O J Outputnoisevoltage f=10Hzto100kHz,andT =25°C 42 μV J Dropoutvoltage T =25°C 1.7 V J T =25°C 3.8 6 J Biascurrent mA T =125°C 5.5 J V =8Vto20V,andT =fullrange 1.5 I J Biascurrentchange I =1mAto40mA,and UA78L05C 0.2 mA O TJ=fullrange UA78L05ACandUA78L05AI 0.1 (1) Pulse-testingtechniquesmaintainT asclosetoT aspossible.Thermaleffectsmustbetakenintoaccountseparately.All J A characteristicsaremeasuredwitha0.33-μFcapacitoracrosstheinputanda0.1-μFcapacitoracrosstheoutput.Fullrangeforthe UA78L05ACisT =0°Cto125°C,andfullrangefortheUA78L05AIisT =–40°Cto125°C. J J Copyright©1976–2016,TexasInstrumentsIncorporated SubmitDocumentationFeedback 5 ProductFolderLinks:UA78L02A UA78L05 UA78L05A UA78L06AUA78L08A UA78L09A UA78L10A UA78L12A UA78L15A

UA78L02A,UA78L05,UA78L05A,UA78L06A UA78L08A,UA78L09A,UA78L10A,UA78L12A,UA78L15A SLVS010V–JANUARY1976–REVISEDNOVEMBER2016 www.ti.com 6.7 Electrical Characteristics: UA78L06 atspecifiedvirtualjunctiontemperature,V =12V,andI =40mA(unlessotherwisenoted) I O PARAMETER TESTCONDITIONS(1) MIN TYP MAX UNIT UA78L06C 5.7 6.2 6.7 T =25°C J V =8.5Vto20V, UA78L06AC 5.95 6.2 6.45 I IO=1mAto40mA UA78L06C 5.6 6.8 Outputvoltage T =0°Cto125°C V J UA78L06AC 5.9 6.5 UA78L06C 5.6 6.8 T =0°Cto125°C,andI =1mAto70mA J O UA78L06AC 5.9 6.5 UA78L06C 35 200 V =8.5Vto20V I Inputvoltage UA78L06AC 35 175 T =25°C mV regulation J UA78L06C 29 150 V =9Vto20V I UA78L06AC 29 125 UA78L06C 39 48 Ripplerejection T =25°C,V =10Vto20V,andf=120Hz dB J I UA78L06AC 40 48 Outputvoltage IO=1mAto100mA 16 80 T =25°C mV regulation J I =1mAto40mA 9 40 O Outputnoisevoltage T =25°C,andf=10Hzto100kHz 46 µV J Dropoutvoltage T =25°C 1.7 V J T =25°C 3.9 6 J Biascurrent mA T =125°C 5.5 J V =9Vto20V 1.5 I Biascurrentchange T =0°Cto125°C UA78L06C 0.2 mA J I =1mAto40mA O UA78L06AC 0.1 (1) Pulse-testingtechniquesmaintainT asclosetoT aspossible.Thermaleffectsmustbetakenintoaccountseparately.All J A characteristicsaremeasuredwitha0.33-µFcapacitoracrosstheinputanda0.1-µFcapacitoracrosstheoutput. 6.8 Electrical Characteristics: UA78L08 atspecifiedvirtualjunctiontemperature,V =14V,andI =40mA(unlessotherwisenoted) I O PARAMETER TESTCONDITIONS(1) MIN TYP MAX UNIT UA78L08C 7.36 8 8.64 T =25°C J V =10.5Vto23V, UA78L08AC 7.7 8 8.3 I IO=1mAto40mA UA78L08C 7.2 8.8 Outputvoltage T =0°Cto125°C V J UA78L08AC 7.6 8.4 UA78L08C 7.2 8.8 I =1mAto70mA T =0°Cto125°C O J UA78L08AC 7.6 8.4 UA78L08C 42 200 V =10.5Vto23V I Inputvoltage UA78L08AC 42 175 T =25°C mV regulation J UA78L08C 36 150 V =11Vto23V I UA78L08AC 36 125 UA78L08C 36 46 Ripplerejection V =13Vto23V,f=120Hz,andT =25°C dB I J UA78L08AC 37 46 Outputvoltage IO=1mAto100mA 18 80 T =25°C mV regulation J I =1mAto40mA 10 40 O Outputnoisevoltage f=10Hzto100kHz,andT =25°C 54 µV J Dropoutvoltage T =25°C 1.7 V J T =25°C 4 6 J Biascurrent mA T =125°C 5.5 J (1) Pulse-testingtechniquesmaintainT asclosetoT aspossible.Thermaleffectsmustbetakenintoaccountseparately.All J A characteristicsaremeasuredwitha0.33-µFcapacitoracrosstheinputanda0.1-µFcapacitoracrosstheoutput. 6 SubmitDocumentationFeedback Copyright©1976–2016,TexasInstrumentsIncorporated ProductFolderLinks:UA78L02A UA78L05 UA78L05A UA78L06AUA78L08A UA78L09A UA78L10A UA78L12A UA78L15A

UA78L02A,UA78L05,UA78L05A,UA78L06A UA78L08A,UA78L09A,UA78L10A,UA78L12A,UA78L15A www.ti.com SLVS010V–JANUARY1976–REVISEDNOVEMBER2016 Electrical Characteristics: UA78L08 (continued) atspecifiedvirtualjunctiontemperature,V =14V,andI =40mA(unlessotherwisenoted) I O PARAMETER TESTCONDITIONS(1) MIN TYP MAX UNIT V =11Vto23V 1.5 I Biascurrentchange T =0°Cto125°C UA78L08C 0.2 mA J I =1mAto40mA O UA78L08AC 0.1 6.9 Electrical Characteristics: UA78L09 atspecifiedvirtualjunctiontemperature,V =16V,andI =40mA(unlessotherwisenoted) I O PARAMETER TESTCONDITIONS(1) MIN TYP MAX UNIT UA78L09C 8.3 9 9.7 T =25°C J V =12Vto24V, UA78L09AC 8.6 9 9.4 I IO=1mAto40mA UA78L09C 8.1 9.9 Outputvoltage T =0°Cto125°C V J UA78L09AC 8.55 9.45 UA78L09C 8.1 9.9 I =1mAto70mA,andT =0°Cto125°C O J UA78L09AC 8.55 9.45 UA78L09C 45 225 V =12Vto24V I Inputvoltage UA78L09AC 45 175 T =25°C mV regulation J UA78L09C 40 175 V =13Vto24V I UA78L09AC 40 125 UA78L09C 36 45 Ripplerejection V =15Vto25V,f=120Hz,andT =25°C dB I J UA78L09AC 38 45 Outputvoltage IO=1mAto100mA 19 90 T =25°C mV regulation J I =1mAto40mA 11 40 O Outputnoisevoltage f=10Hzto100kHz,andT =25°C 58 µV J Dropoutvoltage T =25°C 1.7 V J T =25°C 4.1 6 J Biascurrent mA T =125°C 5.5 J V =13Vto24V 1.5 I Biascurrentchange T =0°Cto125°C UA78L09C 0.2 mA J I =1mAto40mA O UA78L09AC 0.1 (1) Pulse-testingtechniquesmaintainT asclosetoT aspossible.Thermaleffectsmustbetakenintoaccountseparately.All J A characteristicsaremeasuredwitha0.33-µFcapacitoracrosstheinputanda0.1-µFcapacitoracrosstheoutput. 6.10 Electrical Characteristics: UA78L10 atspecifiedvirtualjunctiontemperature,V =14V,andI =40mA(unlessotherwisenoted)(1) I O PARAMETER TESTCONDITIONS(2) MIN TYP MAX UNIT VI=13Vto25V,andIO= TJ=25°C 9.6 10 10.4 Outputvoltage 1mAto40mA T =0°Cto125°C 9.5 10.5 V J T =0°Cto125°C,andI =1mAto70mA 9.5 10.5 J O V =13Vto25V 51 175 I Inputvoltageregulation T =25°C mV J V =14Vto25V 42 125 I Ripplerejection T =25°C,V =15Vto25V,andf=120Hz 37 44 dB J I I =1mAto100mA 20 90 O Outputvoltageregulation T =25°C mV J I =1mAto40mA 11 40 O Outputnoisevoltage T =25°C,andf=10Hzto100kHz 62 µV J Dropoutvoltage T =25°C 1.7 V J (1) AppliestoUA78L10AC. (2) Pulse-testingtechniquesmaintainT asclosetoT aspossible.Thermaleffectsmustbetakenintoaccountseparately.All J A characteristicsaremeasuredwitha0.33-µFcapacitoracrosstheinputanda0.1-µFcapacitoracrosstheoutput. Copyright©1976–2016,TexasInstrumentsIncorporated SubmitDocumentationFeedback 7 ProductFolderLinks:UA78L02A UA78L05 UA78L05A UA78L06AUA78L08A UA78L09A UA78L10A UA78L12A UA78L15A

UA78L02A,UA78L05,UA78L05A,UA78L06A UA78L08A,UA78L09A,UA78L10A,UA78L12A,UA78L15A SLVS010V–JANUARY1976–REVISEDNOVEMBER2016 www.ti.com Electrical Characteristics: UA78L10 (continued) atspecifiedvirtualjunctiontemperature,V =14V,andI =40mA(unlessotherwisenoted)(1) I O PARAMETER TESTCONDITIONS(2) MIN TYP MAX UNIT T =25°C 4.2 6 J Biascurrent mA T =125°C 5.5 J V =14Vto25V 1.5 I Biascurrentchange T =0°Cto125°C mA J I =1mAto40mA 0.1 O 6.11 Electrical Characteristics: UA78L12 atspecifiedvirtualjunctiontemperature,V =19V,andI =40mA(unlessotherwisenoted) I O PARAMETER TESTCONDITIONS(1) MIN TYP MAX UNIT UA78L12C 11.1 12 12.9 T =25°C J V =14Vto27V,and UA78L12AC 11.5 12 12.5 I IO=1mAto40mA UA78L12C 10.8 13.2 Outputvoltage T =0°Cto125°C V J UA78L12AC 11.4 12.6 UA78L12C 10.8 13.2 T =0°Cto125°C,andI =1mAto70mA J O UA78L12AC 11.4 12.6 V =14.5Vto27V 55 250 I Inputvoltageregulation T =25°C mV J V =16Vto27V 49 200 I V =15Vto25V,andf UA78L12C 36 42 Ripplerejection T =25°C I dB J =120Hz UA78L12AC 37 42 I =1mAto100mA 22 100 O Outputvoltageregulation T =25°C mV J I =1mAto40mA 13 50 O Outputnoisevoltage T =25°C,andf=10Hzto100kHz 70 µV J Dropoutvoltage T =25°C 1.7 V J T =25°C 4.3 6.5 J Biascurrent mA T =125°C 6 J V =16Vto27V 1.5 I Biascurrentchange T =0°Cto125°C UA78L12C 0.2 mA J I =1mAto40mA O UA78L12AC 0.1 (1) Pulse-testingtechniquesmaintainT asclosetoT aspossible.Thermaleffectsmustbetakenintoaccountseparately.All J A characteristicsaremeasuredwitha0.33-µFcapacitoracrosstheinputanda0.1-µFcapacitoracrosstheoutput. 6.12 Electrical Characteristics: UA78L15 atspecifiedvirtualjunctiontemperature,V =23V,andI =40mA(unlessotherwisenoted) I O PARAMETER TESTCONDITIONS(1) MIN TYP MAX UNIT UA78L15C 13.8 15 16.2 T =25°C VI=17.5Vto30V, J UA78L15AC 14.4 15 15.6 andI =1mAto40 O mA UA78L15C 13.5 16.5 Outputvoltage T =0°Cto125°C V J UA78L15AC 14.25 15.75 UA78L15C 13.5 16.5 T =0°Cto125°C,andI =1mAto70mA J O UA78L15AC 14.25 15.75 V =17.5Vto30V 65 300 I Inputvoltageregulation T =25°C mV J V =20Vto30V 58 250 I V =18.5Vto28.5V, UA78L15C 33 39 Ripplerejection T =25°C I dB J andf=120Hz UA78L15AC 34 39 (1) Pulse-testingtechniquesmaintainT asclosetoT aspossible.Thermaleffectsmustbetakenintoaccountseparately.All J A characteristicsaremeasuredwitha0.33-µFcapacitoracrosstheinputanda0.1-µFcapacitoracrosstheoutput. 8 SubmitDocumentationFeedback Copyright©1976–2016,TexasInstrumentsIncorporated ProductFolderLinks:UA78L02A UA78L05 UA78L05A UA78L06AUA78L08A UA78L09A UA78L10A UA78L12A UA78L15A

UA78L02A,UA78L05,UA78L05A,UA78L06A UA78L08A,UA78L09A,UA78L10A,UA78L12A,UA78L15A www.ti.com SLVS010V–JANUARY1976–REVISEDNOVEMBER2016 Electrical Characteristics: UA78L15 (continued) atspecifiedvirtualjunctiontemperature,V =23V,andI =40mA(unlessotherwisenoted) I O PARAMETER TESTCONDITIONS(1) MIN TYP MAX UNIT I =1mAto100mA 25 150 O Outputvoltageregulation T =25°C mV J I =1mAto40mA 15 75 O Outputnoisevoltage T =25°C,andf=10Hzto100kHz 82 μV J Dropoutvoltage T =25°C 1.7 V J T =25°C 4.6 6.5 J Biascurrent mA T =125°C 6 J V =10Vto30V 1.5 I Biascurrentchange T =0°Cto125°C UA78L15C 0.2 mA J I =1mAto40mA O UA78L15AC 0.1 6.13 Typical Characteristics 4.174 5.25 TA = 25qC TA = 25qC 4.172 VI = 10 V IO = 40 mA 5 4.17 A] A] 4.75 m m nt [ 4.168 nt [ Curre 4.166 Curre 4.5 s s Bia 4.164 Bia 4.25 4 4.162 4.16 3.75 0 10 20 30 40 50 60 70 80 90 100 8 10 12 14 16 18 20 Load Current (IO) [mA] D001 Input Voltage (VI) [V] D002 Figure1.BiasCurrentvsLoadCurrent Figure2.BiasCurrentvsInputVoltage 5.1 5.1 5.08 TIOA == 4205 qmCA 5.08 TVAI == 1205 qVC 5.06 5.06 V] V] ) [O 5.04 ) [O 5.04 e (V 5.02 e (V 5.02 g g a 5 a 5 olt olt ut V 4.98 ut V 4.98 utp 4.96 utp 4.96 O O 4.94 4.94 4.92 4.92 4.9 4.9 6 8 10 12 14 16 18 20 0 10 20 30 40 50 60 70 80 90 100 Input Voltage (VI) [V] D003 Output Current (IO) [mA] D004 Figure3.LineRegulation Figure4.LoadRegulation Copyright©1976–2016,TexasInstrumentsIncorporated SubmitDocumentationFeedback 9 ProductFolderLinks:UA78L02A UA78L05 UA78L05A UA78L06AUA78L08A UA78L09A UA78L10A UA78L12A UA78L15A

UA78L02A,UA78L05,UA78L05A,UA78L06A UA78L08A,UA78L09A,UA78L10A,UA78L12A,UA78L15A SLVS010V–JANUARY1976–REVISEDNOVEMBER2016 www.ti.com 7 Detailed Description 7.1 Overview The UA78L00 series of fixed-voltage integrated-circuit voltage regulators is designed for a wide range of applications. Each of these regulators can deliver up to 100 mA of output current at a fixed output voltage dependingonthedevicevariant. 7.2 Functional Block Diagram INPUT 20 kW OUTPUT 1 kWto 14 kW 1.4 kW COMMON Copyright © 2016,Texas Instruments Incorporated NOTE:Resistorvaluesshownarenominal. 7.3 Feature Description The UA78L00 series of linear regulators are easy-to-use, fixed-output voltage regulators. The devices enable up to100mAofcurrentandfeatureshort-circuitcurrentlimitingandthermaloverloadprotection. 7.4 Device Functional Modes 7.4.1 Fixed-OutputMode These devices are available in fixed-output voltages. Table 1 describes the typical output voltage provided by eachdevicevariation. Table1.UA78L00TypicalDeviceVoltageOutputs DEVICE TYPICALOUTPUTVOLTAGE(V) UA78L02 2.6 UA78L05 5 UA78L06 6.2 UA78L08 8 UA78L09 9 UA78L10 10 UA78L12 12 UA78L15 15 10 SubmitDocumentationFeedback Copyright©1976–2016,TexasInstrumentsIncorporated ProductFolderLinks:UA78L02A UA78L05 UA78L05A UA78L06AUA78L08A UA78L09A UA78L10A UA78L12A UA78L15A

UA78L02A,UA78L05,UA78L05A,UA78L06A UA78L08A,UA78L09A,UA78L10A,UA78L12A,UA78L15A www.ti.com SLVS010V–JANUARY1976–REVISEDNOVEMBER2016 8 Applications and Implementation NOTE Information in the following applications sections is not part of the TI component specification, and TI does not warrant its accuracy or completeness. TI’s customers are responsible for determining suitability of components for their purposes. Customers should validateandtesttheirdesignimplementationtoconfirmsystemfunctionality. 8.1 Application Information The UA78L00 devices are ideal for use as linear regulators with only a few external components needed. The UA78L00devicescanalsobeusedtocleanpowersupplynoisebyattenuatingrippleontheinputsignal. 8.2 Typical Application The UA78L00 devices are typically used as fixed-output linear regulators, sourcing current up to 100 mA into a load. UA78L00 V INPUT OUTPUT V I O 0.33 (cid:29)F COMMON 0.1 (cid:29)F Copyright ' 2016, Texas Instruments Incorporated Figure5. FixedOutputRegulator 8.2.1 DesignRequirements TheCOMMONpinmustbetiedtogroundtosettheOUTPUTpintothedesiredfixedoutputvoltage. Although not required, a 0.33-µF bypass capacitor is recommended on the input, and a 0.1-µF bypass capacitor isrecommendontheoutput. 8.2.2 DetailedDesignProcedure Occasionally, the input voltage to the regulator can collapse faster than the output voltage. For example, this can occur when the input supply is crowbarred during an output overvoltage condition. If the output voltage is greater than approximately 7 V, the emitter-base junction of the series-pass element (internal or external) could break downandbedamaged.Topreventthis,adiodeshuntcanbeemployedasshowninFigure6. 1N4001 or Equivalent UA78L00 V INPUT OUTPUT V I O 0.33 (cid:29)F COMMON 0.1 (cid:29)F Copyright ' 2016, Texas Instruments Incorporated Figure6. Reverse-Bias-ProtectionCircuit Copyright©1976–2016,TexasInstrumentsIncorporated SubmitDocumentationFeedback 11 ProductFolderLinks:UA78L02A UA78L05 UA78L05A UA78L06AUA78L08A UA78L09A UA78L10A UA78L12A UA78L15A

UA78L02A,UA78L05,UA78L05A,UA78L06A UA78L08A,UA78L09A,UA78L10A,UA78L12A,UA78L15A SLVS010V–JANUARY1976–REVISEDNOVEMBER2016 www.ti.com Typical Application (continued) In many cases, a regulator powers a load that is not connected to ground, but instead, is connected to a voltage source of opposite polarity (for example, operational amplifiers, level-shifting circuits, and so on). In these cases, a clamp diode should be connected to the regulator output as shown in Figure 7. This protects the regulator from outputpolarityreversalsduringstartupandshort-circuitoperation. 1N4001 or UA78L00 Equivalent V INPUT OUTPUT V I O 0.33 (cid:29)F COMMON 0.1 (cid:29)F -V O Copyright ' 2016, Texas Instruments Incorporated Figure7. OutputPolarity-Reversal-ProtectionCircuit 8.2.3 ApplicationCurves 7 TA = 25qC 6 VO = 40 mA (@ 5V) ) [V]O 5 V e ( 4 g a Volt 3 ut p ut 2 O 1 0 0 2 4 6 8 10 12 14 16 18 20 Input Voltage (VO) [V] D005 Figure8.OutputVoltagevsInputVoltage 8.3 System Examples 8.3.1 PositiveRegulatorinNegativeConfiguration UA78L00 INPUT OUTPUT GND + V COMMON I - -V O Copyright ' 2016, Texas Instruments Incorporated Figure9. PositiveRegulatorinNegativeConfiguration(V MustFloat) I 8.3.2 CurrentLimiterCircuit Figure 10 shows an example of using the UA78L00 as a current limiter. The output current limit is set by Equation1. æV ö IO=çè RO1÷ø+IO BiasCurrent (1) 12 SubmitDocumentationFeedback Copyright©1976–2016,TexasInstrumentsIncorporated ProductFolderLinks:UA78L02A UA78L05 UA78L05A UA78L06AUA78L08A UA78L09A UA78L10A UA78L12A UA78L15A

UA78L02A,UA78L05,UA78L05A,UA78L06A UA78L08A,UA78L09A,UA78L10A,UA78L12A,UA78L15A www.ti.com SLVS010V–JANUARY1976–REVISEDNOVEMBER2016 System Examples (continued) I UA78L00 O V INPUT OUTPUT Output I R1 COMMON + V - O(Reg) Copyright ' 2016, Texas Instruments Incorporated Figure10. CurrentLimiterExample 9 Power Supply Recommendations See Recommended Operating Conditions for the recommended power supply voltages for each variation of the UA78L00.Notethateachdevicevariantmayhaveadifferentrecommendedmaximumoperatingvoltage. 10 Layout 10.1 Layout Guidelines Keep trace widths large enough to eliminate problematic I×R voltage drops at the input and output terminals. Bypass capacitors should be placed as close to the UA78L00 as possible. Additional copper and vias connected togroundfacilitateadditionalthermaldissipation,preventingthedevicefromreachingthermaloverload. 10.2 Layout Example Ground N T O TPU MM UT U O P O C N I V V O I 0.1 (cid:29)F 0.33 (cid:29)F Figure11. ExampleLayoutforPKPackage Copyright©1976–2016,TexasInstrumentsIncorporated SubmitDocumentationFeedback 13 ProductFolderLinks:UA78L02A UA78L05 UA78L05A UA78L06AUA78L08A UA78L09A UA78L10A UA78L12A UA78L15A

UA78L02A,UA78L05,UA78L05A,UA78L06A UA78L08A,UA78L09A,UA78L10A,UA78L12A,UA78L15A SLVS010V–JANUARY1976–REVISEDNOVEMBER2016 www.ti.com 11 Device and Documentation Support 11.1 Related Links The table below lists quick access links. Categories include technical documents, support and community resources,toolsandsoftware,andquickaccesstosampleorbuy. Table2.RelatedLinks TECHNICAL TOOLS& SUPPORT& PARTS PRODUCTFOLDER SAMPLE&BUY DOCUMENTS SOFTWARE COMMUNITY UA78L02A Clickhere Clickhere Clickhere Clickhere Clickhere UA78L05 Clickhere Clickhere Clickhere Clickhere Clickhere UA78L05A Clickhere Clickhere Clickhere Clickhere Clickhere UA78L06A Clickhere Clickhere Clickhere Clickhere Clickhere UA78L08A Clickhere Clickhere Clickhere Clickhere Clickhere UA78L09A Clickhere Clickhere Clickhere Clickhere Clickhere UA78L10A Clickhere Clickhere Clickhere Clickhere Clickhere UA78L12A Clickhere Clickhere Clickhere Clickhere Clickhere UA78L15A Clickhere Clickhere Clickhere Clickhere Clickhere 11.2 Receiving Notification of Documentation Updates To receive notification of documentation updates, navigate to the device product folder on ti.com. In the upper right corner, click on Alert me to register and receive a weekly digest of any product information that has changed.Forchangedetails,reviewtherevisionhistoryincludedinanyreviseddocument. 11.3 Community Resource The following links connect to TI community resources. Linked contents are provided "AS IS" by the respective contributors. They do not constitute TI specifications and do not necessarily reflect TI's views; see TI's Terms of Use. TIE2E™OnlineCommunity TI'sEngineer-to-Engineer(E2E)Community.Createdtofostercollaboration amongengineers.Ate2e.ti.com,youcanaskquestions,shareknowledge,exploreideasandhelp solveproblemswithfellowengineers. DesignSupport TI'sDesignSupport QuicklyfindhelpfulE2Eforumsalongwithdesignsupporttoolsand contactinformationfortechnicalsupport. 11.4 Trademarks E2EisatrademarkofTexasInstruments. Allothertrademarksarethepropertyoftheirrespectiveowners. 11.5 Electrostatic Discharge Caution Thesedeviceshavelimitedbuilt-inESDprotection.Theleadsshouldbeshortedtogetherorthedeviceplacedinconductivefoam duringstorageorhandlingtopreventelectrostaticdamagetotheMOSgates. 11.6 Glossary SLYZ022—TIGlossary. Thisglossarylistsandexplainsterms,acronyms,anddefinitions. 12 Mechanical, Packaging, and Orderable Information The following pages include mechanical, packaging, and orderable information. This information is the most current data available for the designated devices. This data is subject to change without notice and revision of thisdocument.Forbrowser-basedversionsofthisdatasheet,refertotheleft-handnavigation. 14 SubmitDocumentationFeedback Copyright©1976–2016,TexasInstrumentsIncorporated ProductFolderLinks:UA78L02A UA78L05 UA78L05A UA78L06AUA78L08A UA78L09A UA78L10A UA78L12A UA78L15A

PACKAGE OPTION ADDENDUM www.ti.com 6-Feb-2020 PACKAGING INFORMATION Orderable Device Status Package Type Package Pins Package Eco Plan Lead/Ball Finish MSL Peak Temp Op Temp (°C) Device Marking Samples (1) Drawing Qty (2) (6) (3) (4/5) UA78L02ACD ACTIVE SOIC D 8 75 Green (RoHS NIPDAU Level-1-260C-UNLIM 0 to 125 78L02A & no Sb/Br) UA78L02ACDG4 ACTIVE SOIC D 8 75 Green (RoHS NIPDAU Level-1-260C-UNLIM 0 to 125 78L02A & no Sb/Br) UA78L02ACLP ACTIVE TO-92 LP 3 1000 Pb-Free SN N / A for Pkg Type 0 to 125 78L02AC (RoHS) UA78L02ACLPE3 ACTIVE TO-92 LP 3 1000 Pb-Free SN N / A for Pkg Type 0 to 125 78L02AC (RoHS) UA78L05ACD ACTIVE SOIC D 8 75 Green (RoHS NIPDAU Level-1-260C-UNLIM 0 to 125 78L05A & no Sb/Br) UA78L05ACDE4 ACTIVE SOIC D 8 75 Green (RoHS NIPDAU Level-1-260C-UNLIM 0 to 125 78L05A & no Sb/Br) UA78L05ACDG4 ACTIVE SOIC D 8 75 Green (RoHS NIPDAU Level-1-260C-UNLIM 0 to 125 78L05A & no Sb/Br) UA78L05ACDR ACTIVE SOIC D 8 2500 Green (RoHS NIPDAU | SN Level-1-260C-UNLIM 0 to 125 78L05A & no Sb/Br) UA78L05ACDRE4 ACTIVE SOIC D 8 2500 Green (RoHS NIPDAU Level-1-260C-UNLIM 0 to 125 78L05A & no Sb/Br) UA78L05ACDRG4 ACTIVE SOIC D 8 2500 Green (RoHS NIPDAU Level-1-260C-UNLIM 0 to 125 78L05A & no Sb/Br) UA78L05ACLP ACTIVE TO-92 LP 3 1000 Pb-Free SN N / A for Pkg Type 0 to 125 78L05AC (RoHS) UA78L05ACLPE3 ACTIVE TO-92 LP 3 1000 Pb-Free SN N / A for Pkg Type 0 to 125 78L05AC (RoHS) UA78L05ACLPM ACTIVE TO-92 LP 3 2000 Pb-Free SN N / A for Pkg Type 0 to 125 78L05AC (RoHS) UA78L05ACLPME3 ACTIVE TO-92 LP 3 2000 Pb-Free SN N / A for Pkg Type 0 to 125 78L05AC (RoHS) UA78L05ACLPR ACTIVE TO-92 LP 3 2000 Pb-Free SN N / A for Pkg Type 0 to 125 78L05AC (RoHS) UA78L05ACLPRE3 ACTIVE TO-92 LP 3 2000 Pb-Free SN N / A for Pkg Type 0 to 125 78L05AC (RoHS) UA78L05ACPK ACTIVE SOT-89 PK 3 1000 Green (RoHS SN Level-2-260C-1 YEAR 0 to 125 F5 & no Sb/Br) Addendum-Page 1

PACKAGE OPTION ADDENDUM www.ti.com 6-Feb-2020 Orderable Device Status Package Type Package Pins Package Eco Plan Lead/Ball Finish MSL Peak Temp Op Temp (°C) Device Marking Samples (1) Drawing Qty (2) (6) (3) (4/5) UA78L05ACPKE6 ACTIVE SOT-89 PK 3 1000 Pb-Free SNBI Level-1-260C-UNLIM 0 to 125 F5 (RoHS) UA78L05ACPKG3 ACTIVE SOT-89 PK 3 1000 Green (RoHS SN Level-2-260C-1 YEAR 0 to 125 F5 & no Sb/Br) UA78L05AID ACTIVE SOIC D 8 75 Green (RoHS NIPDAU Level-1-260C-UNLIM -40 to 125 78L05AI & no Sb/Br) UA78L05AIDR ACTIVE SOIC D 8 2500 Green (RoHS NIPDAU Level-1-260C-UNLIM -40 to 125 78L05AI & no Sb/Br) UA78L05AIDRE4 ACTIVE SOIC D 8 2500 Green (RoHS NIPDAU Level-1-260C-UNLIM -40 to 125 78L05AI & no Sb/Br) UA78L05AILP ACTIVE TO-92 LP 3 1000 Pb-Free SN N / A for Pkg Type -40 to 125 78L05AI (RoHS) UA78L05AILPE3 ACTIVE TO-92 LP 3 1000 Pb-Free SN N / A for Pkg Type -40 to 125 78L05AI (RoHS) UA78L05AILPR ACTIVE TO-92 LP 3 2000 Pb-Free SN N / A for Pkg Type -40 to 125 78L05AI (RoHS) UA78L05AILPRE3 ACTIVE TO-92 LP 3 2000 Pb-Free SN N / A for Pkg Type -40 to 125 78L05AI (RoHS) UA78L05AIPK ACTIVE SOT-89 PK 3 1000 Green (RoHS SN Level-2-260C-1 YEAR -40 to 125 J5 & no Sb/Br) UA78L05AIPKG3 ACTIVE SOT-89 PK 3 1000 Green (RoHS SN Level-2-260C-1 YEAR -40 to 125 J5 & no Sb/Br) UA78L05CD ACTIVE SOIC D 8 75 Green (RoHS NIPDAU Level-1-260C-UNLIM 0 to 125 78L05C & no Sb/Br) UA78L05CDG4 ACTIVE SOIC D 8 75 Green (RoHS NIPDAU Level-1-260C-UNLIM 0 to 125 78L05C & no Sb/Br) UA78L05CDR ACTIVE SOIC D 8 2500 Green (RoHS NIPDAU Level-1-260C-UNLIM 0 to 125 78L05C & no Sb/Br) UA78L05CDRE4 ACTIVE SOIC D 8 2500 Green (RoHS NIPDAU Level-1-260C-UNLIM 0 to 125 78L05C & no Sb/Br) UA78L05CLP ACTIVE TO-92 LP 3 1000 Pb-Free SN N / A for Pkg Type 0 to 125 78L05C (RoHS) UA78L05CLPE3 ACTIVE TO-92 LP 3 1000 Pb-Free SN N / A for Pkg Type 0 to 125 78L05C (RoHS) UA78L05CLPR ACTIVE TO-92 LP 3 2000 Pb-Free SN N / A for Pkg Type 0 to 125 78L05C (RoHS) Addendum-Page 2

PACKAGE OPTION ADDENDUM www.ti.com 6-Feb-2020 Orderable Device Status Package Type Package Pins Package Eco Plan Lead/Ball Finish MSL Peak Temp Op Temp (°C) Device Marking Samples (1) Drawing Qty (2) (6) (3) (4/5) UA78L05CPK ACTIVE SOT-89 PK 3 1000 Green (RoHS SN Level-2-260C-1 YEAR 0 to 125 B5 & no Sb/Br) UA78L05CPKG3 ACTIVE SOT-89 PK 3 1000 Green (RoHS SN Level-2-260C-1 YEAR 0 to 125 B5 & no Sb/Br) UA78L06ACLP ACTIVE TO-92 LP 3 1000 Pb-Free SN N / A for Pkg Type 0 to 125 78L06AC (RoHS) UA78L06ACLPE3 ACTIVE TO-92 LP 3 1000 Pb-Free SN N / A for Pkg Type 0 to 125 78L06AC (RoHS) UA78L06ACLPR ACTIVE TO-92 LP 3 2000 Pb-Free SN N / A for Pkg Type 0 to 125 78L06AC (RoHS) UA78L06ACLPRE3 ACTIVE TO-92 LP 3 2000 Pb-Free SN N / A for Pkg Type 0 to 125 78L06AC (RoHS) UA78L06ACPK ACTIVE SOT-89 PK 3 1000 Green (RoHS SN Level-2-260C-1 YEAR 0 to 125 F6 & no Sb/Br) UA78L06ACPKG3 ACTIVE SOT-89 PK 3 1000 Green (RoHS SN Level-2-260C-1 YEAR 0 to 125 F6 & no Sb/Br) UA78L08ACD ACTIVE SOIC D 8 75 Green (RoHS NIPDAU Level-1-260C-UNLIM 0 to 125 78L08A & no Sb/Br) UA78L08ACDR ACTIVE SOIC D 8 2500 Green (RoHS NIPDAU | SN Level-1-260C-UNLIM 0 to 125 78L08A & no Sb/Br) UA78L08ACDRG4 ACTIVE SOIC D 8 2500 Green (RoHS NIPDAU Level-1-260C-UNLIM 0 to 125 78L08A & no Sb/Br) UA78L08ACLP ACTIVE TO-92 LP 3 1000 Pb-Free SN N / A for Pkg Type 0 to 125 78L08AC (RoHS) UA78L08ACLPE3 ACTIVE TO-92 LP 3 1000 Pb-Free SN N / A for Pkg Type 0 to 125 78L08AC (RoHS) UA78L08ACLPR ACTIVE TO-92 LP 3 2000 Pb-Free SN N / A for Pkg Type 0 to 125 78L08AC (RoHS) UA78L08ACLPRE3 ACTIVE TO-92 LP 3 2000 Pb-Free SN N / A for Pkg Type 0 to 125 78L08AC (RoHS) UA78L08ACPK ACTIVE SOT-89 PK 3 1000 Green (RoHS SN Level-2-260C-1 YEAR 0 to 125 F8 & no Sb/Br) UA78L08ACPKG3 ACTIVE SOT-89 PK 3 1000 Green (RoHS SN Level-2-260C-1 YEAR 0 to 125 F8 & no Sb/Br) UA78L09ACD ACTIVE SOIC D 8 75 Green (RoHS NIPDAU Level-1-260C-UNLIM 0 to 125 78L09A & no Sb/Br) Addendum-Page 3

PACKAGE OPTION ADDENDUM www.ti.com 6-Feb-2020 Orderable Device Status Package Type Package Pins Package Eco Plan Lead/Ball Finish MSL Peak Temp Op Temp (°C) Device Marking Samples (1) Drawing Qty (2) (6) (3) (4/5) UA78L09ACDR ACTIVE SOIC D 8 2500 Green (RoHS NIPDAU Level-1-260C-UNLIM 0 to 125 78L09A & no Sb/Br) UA78L09ACDRE4 ACTIVE SOIC D 8 2500 Green (RoHS NIPDAU Level-1-260C-UNLIM 0 to 125 78L09A & no Sb/Br) UA78L09ACLP ACTIVE TO-92 LP 3 1000 Pb-Free SN N / A for Pkg Type 0 to 125 78L09AC (RoHS) UA78L09ACLPE3 ACTIVE TO-92 LP 3 1000 Pb-Free SN N / A for Pkg Type 0 to 125 78L09AC (RoHS) UA78L09ACLPR ACTIVE TO-92 LP 3 2000 Pb-Free SN N / A for Pkg Type 0 to 125 78L09AC (RoHS) UA78L09ACLPRE3 ACTIVE TO-92 LP 3 2000 Pb-Free SN N / A for Pkg Type 0 to 125 78L09AC (RoHS) UA78L09ACPK ACTIVE SOT-89 PK 3 1000 Green (RoHS SN Level-2-260C-1 YEAR 0 to 125 F9 & no Sb/Br) UA78L09ACPKE6 ACTIVE SOT-89 PK 3 1000 Pb-Free SNBI Level-1-260C-UNLIM 0 to 125 F9 (RoHS) UA78L09ACPKG3 ACTIVE SOT-89 PK 3 1000 Green (RoHS SN Level-2-260C-1 YEAR 0 to 125 F9 & no Sb/Br) UA78L10ACD ACTIVE SOIC D 8 75 Green (RoHS NIPDAU Level-1-260C-UNLIM 0 to 125 78L10A & no Sb/Br) UA78L10ACDR ACTIVE SOIC D 8 2500 Green (RoHS NIPDAU Level-1-260C-UNLIM 0 to 125 78L10A & no Sb/Br) UA78L10ACDRE4 ACTIVE SOIC D 8 2500 Green (RoHS NIPDAU Level-1-260C-UNLIM 0 to 125 78L10A & no Sb/Br) UA78L10ACLP ACTIVE TO-92 LP 3 1000 Pb-Free SN N / A for Pkg Type 0 to 125 78L10AC (RoHS) UA78L10ACLPE3 ACTIVE TO-92 LP 3 1000 Pb-Free SN N / A for Pkg Type 0 to 125 78L10AC (RoHS) UA78L10ACLPR ACTIVE TO-92 LP 3 2000 Pb-Free SN N / A for Pkg Type 0 to 125 78L10AC (RoHS) UA78L10ACLPRE3 ACTIVE TO-92 LP 3 2000 Pb-Free SN N / A for Pkg Type 0 to 125 78L10AC (RoHS) UA78L10ACPK ACTIVE SOT-89 PK 3 1000 Green (RoHS SN Level-2-260C-1 YEAR 0 to 125 FA & no Sb/Br) UA78L10ACPKG3 ACTIVE SOT-89 PK 3 1000 Green (RoHS SN Level-2-260C-1 YEAR 0 to 125 FA & no Sb/Br) Addendum-Page 4

PACKAGE OPTION ADDENDUM www.ti.com 6-Feb-2020 Orderable Device Status Package Type Package Pins Package Eco Plan Lead/Ball Finish MSL Peak Temp Op Temp (°C) Device Marking Samples (1) Drawing Qty (2) (6) (3) (4/5) UA78L12ACD ACTIVE SOIC D 8 75 Green (RoHS NIPDAU Level-1-260C-UNLIM 0 to 125 78L12A & no Sb/Br) UA78L12ACDG4 ACTIVE SOIC D 8 75 Green (RoHS NIPDAU Level-1-260C-UNLIM 0 to 125 78L12A & no Sb/Br) UA78L12ACDR ACTIVE SOIC D 8 2500 Green (RoHS NIPDAU | SN Level-1-260C-UNLIM 0 to 125 78L12A & no Sb/Br) UA78L12ACDRE4 ACTIVE SOIC D 8 2500 Green (RoHS NIPDAU Level-1-260C-UNLIM 0 to 125 78L12A & no Sb/Br) UA78L12ACDRG4 ACTIVE SOIC D 8 2500 Green (RoHS NIPDAU Level-1-260C-UNLIM 0 to 125 78L12A & no Sb/Br) UA78L12ACLP ACTIVE TO-92 LP 3 1000 Pb-Free SN N / A for Pkg Type 0 to 125 78L12AC (RoHS) UA78L12ACLPE3 ACTIVE TO-92 LP 3 1000 Pb-Free SN N / A for Pkg Type 0 to 125 78L12AC (RoHS) UA78L12ACLPM ACTIVE TO-92 LP 3 2000 Pb-Free SN N / A for Pkg Type 0 to 125 78L12AC (RoHS) UA78L12ACLPR ACTIVE TO-92 LP 3 2000 Pb-Free SN N / A for Pkg Type 0 to 125 78L12AC (RoHS) UA78L12ACPK ACTIVE SOT-89 PK 3 1000 Green (RoHS SN Level-2-260C-1 YEAR 0 to 125 FC & no Sb/Br) UA78L12ACPKG3 ACTIVE SOT-89 PK 3 1000 Green (RoHS SN Level-2-260C-1 YEAR 0 to 125 FC & no Sb/Br) UA78L15ACD ACTIVE SOIC D 8 75 Green (RoHS NIPDAU Level-1-260C-UNLIM 0 to 125 78L15A & no Sb/Br) UA78L15ACDR ACTIVE SOIC D 8 2500 Green (RoHS NIPDAU Level-1-260C-UNLIM 0 to 125 78L15A & no Sb/Br) UA78L15ACDRE4 ACTIVE SOIC D 8 2500 Green (RoHS NIPDAU Level-1-260C-UNLIM 0 to 125 78L15A & no Sb/Br) UA78L15ACLP ACTIVE TO-92 LP 3 1000 Pb-Free SN N / A for Pkg Type 0 to 125 78L15AC (RoHS) UA78L15ACLPE3 ACTIVE TO-92 LP 3 1000 Pb-Free SN N / A for Pkg Type 0 to 125 78L15AC (RoHS) UA78L15ACLPR ACTIVE TO-92 LP 3 2000 Pb-Free SN N / A for Pkg Type 0 to 125 78L15AC (RoHS) UA78L15ACLPRE3 ACTIVE TO-92 LP 3 2000 Pb-Free SN N / A for Pkg Type 0 to 125 78L15AC (RoHS) Addendum-Page 5

PACKAGE OPTION ADDENDUM www.ti.com 6-Feb-2020 Orderable Device Status Package Type Package Pins Package Eco Plan Lead/Ball Finish MSL Peak Temp Op Temp (°C) Device Marking Samples (1) Drawing Qty (2) (6) (3) (4/5) UA78L15ACPK ACTIVE SOT-89 PK 3 1000 Green (RoHS SN Level-2-260C-1 YEAR 0 to 125 FF & no Sb/Br) UA78L15ACPKG3 ACTIVE SOT-89 PK 3 1000 Green (RoHS SN Level-2-260C-1 YEAR 0 to 125 FF & no Sb/Br) (1) The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. (2) RoHS: TI defines "RoHS" to mean semiconductor products that are compliant with the current EU RoHS requirements for all 10 RoHS substances, including the requirement that RoHS substance do not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, "RoHS" products are suitable for use in specified lead-free processes. TI may reference these types of products as "Pb-Free". RoHS Exempt: TI defines "RoHS Exempt" to mean products that contain lead but are compliant with EU RoHS pursuant to a specific EU RoHS exemption. Green: TI defines "Green" to mean the content of Chlorine (Cl) and Bromine (Br) based flame retardants meet JS709B low halogen requirements of <=1000ppm threshold. Antimony trioxide based flame retardants must also meet the <=1000ppm threshold requirement. (3) MSL, Peak Temp. - The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature. (4) There may be additional marking, which relates to the logo, the lot trace code information, or the environmental category on the device. (5) Multiple Device Markings will be inside parentheses. Only one Device Marking contained in parentheses and separated by a "~" will appear on a device. If a line is indented then it is a continuation of the previous line and the two combined represent the entire Device Marking for that device. (6) Lead/Ball Finish - Orderable Devices may have multiple material finish options. Finish options are separated by a vertical ruled line. Lead/Ball Finish values may wrap to two lines if the finish value exceeds the maximum column width. Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis. Addendum-Page 6

PACKAGE MATERIALS INFORMATION www.ti.com 27-Sep-2018 TAPE AND REEL INFORMATION *Alldimensionsarenominal Device Package Package Pins SPQ Reel Reel A0 B0 K0 P1 W Pin1 Type Drawing Diameter Width (mm) (mm) (mm) (mm) (mm) Quadrant (mm) W1(mm) UA78L05ACDR SOIC D 8 2500 330.0 12.4 6.4 5.2 2.1 8.0 12.0 Q1 UA78L05ACDR SOIC D 8 2500 330.0 12.8 6.4 5.2 2.1 8.0 12.0 Q1 UA78L05ACDRG4 SOIC D 8 2500 330.0 12.4 6.4 5.2 2.1 8.0 12.0 Q1 UA78L05ACPK SOT-89 PK 3 1000 180.0 12.4 4.91 4.52 1.9 8.0 12.0 Q3 UA78L05ACPKE6 SOT-89 PK 3 1000 180.0 13.0 4.91 4.52 1.9 8.0 12.0 Q3 UA78L05AIDR SOIC D 8 2500 330.0 12.4 6.4 5.2 2.1 8.0 12.0 Q1 UA78L05AIPK SOT-89 PK 3 1000 180.0 12.4 4.91 4.52 1.9 8.0 12.0 Q3 UA78L05CDR SOIC D 8 2500 330.0 12.4 6.4 5.2 2.1 8.0 12.0 Q1 UA78L05CPK SOT-89 PK 3 1000 180.0 12.4 4.91 4.52 1.9 8.0 12.0 Q3 UA78L06ACPK SOT-89 PK 3 1000 180.0 12.4 4.91 4.52 1.9 8.0 12.0 Q3 UA78L08ACDR SOIC D 8 2500 330.0 12.4 6.4 5.2 2.1 8.0 12.0 Q1 UA78L08ACDR SOIC D 8 2500 330.0 12.8 6.4 5.2 2.1 8.0 12.0 Q1 UA78L08ACDRG4 SOIC D 8 2500 330.0 12.4 6.4 5.2 2.1 8.0 12.0 Q1 UA78L08ACPK SOT-89 PK 3 1000 180.0 12.4 4.91 4.52 1.9 8.0 12.0 Q3 UA78L09ACDR SOIC D 8 2500 330.0 12.4 6.4 5.2 2.1 8.0 12.0 Q1 UA78L09ACPK SOT-89 PK 3 1000 180.0 12.4 4.91 4.52 1.9 8.0 12.0 Q3 UA78L09ACPKE6 SOT-89 PK 3 1000 180.0 13.0 4.91 4.52 1.9 8.0 12.0 Q3 UA78L10ACDR SOIC D 8 2500 330.0 12.4 6.4 5.2 2.1 8.0 12.0 Q1 PackMaterials-Page1

PACKAGE MATERIALS INFORMATION www.ti.com 27-Sep-2018 Device Package Package Pins SPQ Reel Reel A0 B0 K0 P1 W Pin1 Type Drawing Diameter Width (mm) (mm) (mm) (mm) (mm) Quadrant (mm) W1(mm) UA78L10ACPK SOT-89 PK 3 1000 180.0 12.4 4.91 4.52 1.9 8.0 12.0 Q3 UA78L12ACDR SOIC D 8 2500 330.0 12.8 6.4 5.2 2.1 8.0 12.0 Q1 UA78L12ACDR SOIC D 8 2500 330.0 12.4 6.4 5.2 2.1 8.0 12.0 Q1 UA78L12ACDRG4 SOIC D 8 2500 330.0 12.4 6.4 5.2 2.1 8.0 12.0 Q1 UA78L12ACPK SOT-89 PK 3 1000 180.0 12.4 4.91 4.52 1.9 8.0 12.0 Q3 UA78L15ACDR SOIC D 8 2500 330.0 12.4 6.4 5.2 2.1 8.0 12.0 Q1 UA78L15ACPK SOT-89 PK 3 1000 180.0 12.4 4.91 4.52 1.9 8.0 12.0 Q3 *Alldimensionsarenominal Device PackageType PackageDrawing Pins SPQ Length(mm) Width(mm) Height(mm) UA78L05ACDR SOIC D 8 2500 340.5 338.1 20.6 UA78L05ACDR SOIC D 8 2500 364.0 364.0 27.0 UA78L05ACDRG4 SOIC D 8 2500 340.5 338.1 20.6 UA78L05ACPK SOT-89 PK 3 1000 340.0 340.0 38.0 UA78L05ACPKE6 SOT-89 PK 3 1000 182.4 182.4 17.3 UA78L05AIDR SOIC D 8 2500 340.5 338.1 20.6 UA78L05AIPK SOT-89 PK 3 1000 340.0 340.0 38.0 UA78L05CDR SOIC D 8 2500 340.5 338.1 20.6 UA78L05CPK SOT-89 PK 3 1000 340.0 340.0 38.0 UA78L06ACPK SOT-89 PK 3 1000 340.0 340.0 38.0 PackMaterials-Page2

PACKAGE MATERIALS INFORMATION www.ti.com 27-Sep-2018 Device PackageType PackageDrawing Pins SPQ Length(mm) Width(mm) Height(mm) UA78L08ACDR SOIC D 8 2500 340.5 338.1 20.6 UA78L08ACDR SOIC D 8 2500 364.0 364.0 27.0 UA78L08ACDRG4 SOIC D 8 2500 340.5 338.1 20.6 UA78L08ACPK SOT-89 PK 3 1000 340.0 340.0 38.0 UA78L09ACDR SOIC D 8 2500 340.5 338.1 20.6 UA78L09ACPK SOT-89 PK 3 1000 340.0 340.0 38.0 UA78L09ACPKE6 SOT-89 PK 3 1000 182.4 182.4 17.3 UA78L10ACDR SOIC D 8 2500 340.5 338.1 20.6 UA78L10ACPK SOT-89 PK 3 1000 340.0 340.0 38.0 UA78L12ACDR SOIC D 8 2500 364.0 364.0 27.0 UA78L12ACDR SOIC D 8 2500 340.5 338.1 20.6 UA78L12ACDRG4 SOIC D 8 2500 340.5 338.1 20.6 UA78L12ACPK SOT-89 PK 3 1000 340.0 340.0 38.0 UA78L15ACDR SOIC D 8 2500 340.5 338.1 20.6 UA78L15ACPK SOT-89 PK 3 1000 340.0 340.0 38.0 PackMaterials-Page3

None

None

PACKAGE OUTLINE D0008A SOIC - 1.75 mm max height SCALE 2.800 SMALL OUTLINE INTEGRATED CIRCUIT C SEATING PLANE .228-.244 TYP [5.80-6.19] .004 [0.1] C A PIN 1 ID AREA 6X .050 [1.27] 8 1 2X .189-.197 [4.81-5.00] .150 NOTE 3 [3.81] 4X (0 -15 ) 4 5 8X .012-.020 B .150-.157 [0.31-0.51] .069 MAX [3.81-3.98] .010 [0.25] C A B [1.75] NOTE 4 .005-.010 TYP [0.13-0.25] 4X (0 -15 ) SEE DETAIL A .010 [0.25] .004-.010 0 - 8 [0.11-0.25] .016-.050 [0.41-1.27] DETAIL A (.041) TYPICAL [1.04] 4214825/C 02/2019 NOTES: 1. Linear dimensions are in inches [millimeters]. Dimensions in parenthesis are for reference only. Controlling dimensions are in inches. Dimensioning and tolerancing per ASME Y14.5M. 2. This drawing is subject to change without notice. 3. This dimension does not include mold flash, protrusions, or gate burrs. Mold flash, protrusions, or gate burrs shall not exceed .006 [0.15] per side. 4. This dimension does not include interlead flash. 5. Reference JEDEC registration MS-012, variation AA. www.ti.com

EXAMPLE BOARD LAYOUT D0008A SOIC - 1.75 mm max height SMALL OUTLINE INTEGRATED CIRCUIT 8X (.061 ) [1.55] SYMM SEE DETAILS 1 8 8X (.024) [0.6] SYMM (R.002 ) TYP [0.05] 5 4 6X (.050 ) [1.27] (.213) [5.4] LAND PATTERN EXAMPLE EXPOSED METAL SHOWN SCALE:8X SOLDER MASK SOLDER MASK METAL OPENING OPENING METAL UNDER SOLDER MASK EXPOSED METAL EXPOSED METAL .0028 MAX .0028 MIN [0.07] [0.07] ALL AROUND ALL AROUND NON SOLDER MASK SOLDER MASK DEFINED DEFINED SOLDER MASK DETAILS 4214825/C 02/2019 NOTES: (continued) 6. Publication IPC-7351 may have alternate designs. 7. Solder mask tolerances between and around signal pads can vary based on board fabrication site. www.ti.com

EXAMPLE STENCIL DESIGN D0008A SOIC - 1.75 mm max height SMALL OUTLINE INTEGRATED CIRCUIT 8X (.061 ) [1.55] SYMM 1 8 8X (.024) [0.6] SYMM (R.002 ) TYP [0.05] 5 4 6X (.050 ) [1.27] (.213) [5.4] SOLDER PASTE EXAMPLE BASED ON .005 INCH [0.125 MM] THICK STENCIL SCALE:8X 4214825/C 02/2019 NOTES: (continued) 8. Laser cutting apertures with trapezoidal walls and rounded corners may offer better paste release. IPC-7525 may have alternate design recommendations. 9. Board assembly site may have different recommendations for stencil design. www.ti.com

None

PACKAGE OUTLINE LP0003A TO-92 - 5.34 mm max height SCALE 1.200 SCALE 1.200 TO-92 5.21 4.44 EJECTOR PIN OPTIONAL 5.34 4.32 (1.5) TYP (2.54) SEATING 2X NOTE 3 PLANE 4 MAX (0.51) TYP 6X 0.076 MAX SEATING PLANE 3X 12.7 MIN 0.43 2X 0.55 3X 3X 0.35 2.6 0.2 0.38 2X 1.27 0.13 FORMED LEAD OPTION OTHER DIMENSIONS IDENTICAL STRAIGHT LEAD OPTION TO STRAIGHT LEAD OPTION 2.67 3X 2.03 4.19 3.17 3 2 1 3.43 MIN 4215214/B 04/2017 NOTES: 1. All linear dimensions are in millimeters. Any dimensions in parenthesis are for reference only. Dimensioning and tolerancing per ASME Y14.5M. 2. This drawing is subject to change without notice. 3. Lead dimensions are not controlled within this area. 4. Reference JEDEC TO-226, variation AA. 5. Shipping method: a. Straight lead option available in bulk pack only. b. Formed lead option available in tape and reel or ammo pack. c. Specific products can be offered in limited combinations of shipping medium and lead options. d. Consult product folder for more information on available options. www.ti.com

EXAMPLE BOARD LAYOUT LP0003A TO-92 - 5.34 mm max height TO-92 FULL R TYP 0.05 MAX (1.07) ALL AROUND METAL 3X ( 0.85) HOLE TYP TYP 2X METAL (1.5) 2X (1.5) 2X SOLDER MASK OPENING 1 2 3 (R0.05) TYP 2X (1.07) (1.27) SOLDER MASK (2.54) OPENING LAND PATTERN EXAMPLE STRAIGHT LEAD OPTION NON-SOLDER MASK DEFINED SCALE:15X 0.05 MAX ( 1.4) 2X ( 1.4) ALL AROUND METAL TYP 3X ( 0.9) HOLE METAL 2X (R0.05) TYP 1 2 3 SOLDER MASK OPENING (2.6) SOLDER MASK OPENING (5.2) LAND PATTERN EXAMPLE FORMED LEAD OPTION NON-SOLDER MASK DEFINED SCALE:15X 4215214/B 04/2017 www.ti.com

TAPE SPECIFICATIONS LP0003A TO-92 - 5.34 mm max height TO-92 13.7 11.7 32 23 (2.5) TYP 0.5 MIN 16.5 15.5 11.0 9.75 8.5 8.50 19.0 17.5 2.9 6.75 3.7-4.3 TYP TYP 2.4 5.95 13.0 12.4 FOR FORMED LEAD OPTION PACKAGE 4215214/B 04/2017 www.ti.com

IMPORTANTNOTICEANDDISCLAIMER TI PROVIDES TECHNICAL AND RELIABILITY DATA (INCLUDING DATASHEETS), DESIGN RESOURCES (INCLUDING REFERENCE DESIGNS), APPLICATION OR OTHER DESIGN ADVICE, WEB TOOLS, SAFETY INFORMATION, AND OTHER RESOURCES “AS IS” AND WITH ALL FAULTS, AND DISCLAIMS ALL WARRANTIES, EXPRESS AND IMPLIED, INCLUDING WITHOUT LIMITATION ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY RIGHTS. These resources are intended for skilled developers designing with TI products. You are solely responsible for (1) selecting the appropriate TI products for your application, (2) designing, validating and testing your application, and (3) ensuring your application meets applicable standards, and any other safety, security, or other requirements. These resources are subject to change without notice. TI grants you permission to use these resources only for development of an application that uses the TI products described in the resource. Other reproduction and display of these resources is prohibited. No license is granted to any other TI intellectual property right or to any third party intellectual property right. TI disclaims responsibility for, and you will fully indemnify TI and its representatives against, any claims, damages, costs, losses, and liabilities arising out of your use of these resources. TI’s products are provided subject to TI’s Terms of Sale (www.ti.com/legal/termsofsale.html) or other applicable terms available either on ti.com or provided in conjunction with such TI products. TI’s provision of these resources does not expand or otherwise alter TI’s applicable warranties or warranty disclaimers for TI products. Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright © 2020, Texas Instruments Incorporated