Light Weight Micro SMT Coaxial Connector, 1.9mm to 2.4mm Mated Height U.FL Series Up to 8GHz ●Space Factor of Mated Connector ax) 4 U.FL-LP-040HF M 5 2. ( Ø0.81 4 2. 5 1. U.FL-R-SMT-1 x) U.FL-LP-066HF Ma 4 U.FL-LP-068HF 5 2. ( Ø1.32 Ø1.13 4 2. 1 ■Features U.FL-R-SMT-1 1. Mated Height (1.9mm to 2.4mm NOM) Max) 3.4 U.FL-LP(V)-040HF The maximum height from the board surface when (2 the plug and Receptacle are mated is 2.0 to 2.0mm Ø0.81 Max. depending on the plug for a low profile. 9 1. 1 (Refer to diagram on right) 2. Receptacle U.FL-R-SMT-1 Small and light weight with a mass of 15.7mg and occupied mounting space of 7.7mm2. ax) M 4 U.FL-LP-062HF Compatible with board mounting. (Embossed 2.4 ( packaging) Ø0.95 3. Supports high frequency up to 8G 3 2. 3 4. Plug compatible with ultra-fine coaxial 1. (fluorinated resin insulated) cable U.FL-R-SMT-1 Ø1.37, Ø1.32, Ø1.13, Ø0.95, Ø0.81 ax) U.FL-LP-088HF M 5 5. Various Accessories 2.4 ( Plug insertion/extraction tools, adapter for inspection Ø1.37 and internal wiring, and SMA, MMCX, and TNC 3 2. connectors for U.FL back end connection are 9 0. available. U.FL-R-SMT-1 6. Tactile Mating Tactile click sensation confirms fully mated x) U.FL(A)-LP(P)-068 condition, assuring complete electrical and Ma 5.9 2 mechanical connection. 2. ( 7. Environmental Compatibility Ø1.13 1 ◆Halogen Free 2. 1 Chlorine and bromine above the standard values are not used for receptacle and plug harnesses. U.FL-R-SMT-K(800) U.FL-R-SMT-1 *As defined by IEC61249-2-21 Br-900 ppm maximum, Cl-900 ppm maximum, x) U.FL(A)-LP(P)-088 Cl+Br combined-1,500 ppm maximum Ma 5.9 2 2. ◆ROHS2 Compatible ( Ø1.37 1 ■ 2. Applications Wireless LAN Devices (Wi-Fi 6), Bluetooth devices, U.FL-R-SMT-K(800) 5 6 Car navigation, drone, PDA, GPS, wireless U.FL-R-SMT-1 0. transmission devices, electronic measuring devices, etc. In cases where the application will demand a high level of reliability, such as automotive, please contact a company representative for further information. 2020.10⑦ 1

U.FL Series●Light Weight Micro SMT Coaxial Connector, 1.9mm to 2.4mm Mated Height ■ Product Specifications Nominal characteristic impedance 50ø Operating temperature range -40˚C to +105˚C Storage temperature range -30˚C to +70˚C Ratings Frequency range DC to 8GHz Operating humidity 90%RH max. Storage humidity 90%RH max. Item Specification Conditions Center : 20mø max. (50mø max.) 1. Contact resistance Outer : 10mø max. (20mø max.) 10mA max. (U.FL(A)) 2. Insulation resistance 500Mømin. 100V DC 3. Withstanding voltage No flashover or insulation breakdown. 200V AC / 1 minute Cable Type DC〜3GHz 3〜6GHz 6〜8GHz U.FL-LP-040HF Ø0.81 1.3 Max 1.35 Max 1.4 Max U.FL-LP(V)-040HF Ø0.81 1.3 Max U.FL-LP-068HF Ø1.13 1.3 Max 1.4 Max 1.6 Max U.FL-LP-066HF Ø1.32 1.3 Max 1.5 Max 1.7 Max 4. V.S.W.R.* U.FL-LP-062HF Ø0.95 1.3 Max 1.4 Max U.FL-LP-088HF Ø1.37 1.3 Max 1.4 Max 1.6 Max 6-9GHz : 1.5 Max U.FL(A)-LP(P)-068 Ø1.13 9-12GHz : 1.6 Max 1.3 Max 1.4 Max 12-15GHz : 1.7 Max U.FL(A)-LP(P)-088 Ø1.37 15-18GHz : 2.0 Max 5. Female Contact 0.15N Min./0.1N Min. (062 Plug, U.FL(A)) Measured with Ø0.475 pin gauge Retention Force 6. Durability Contact resistance (mating / un-mating, 30 cycles Initial Value+5mø with corresponding plug) Frequency : 10 to 100Hz, single amplitude of 1.5mm, 7. Vibration acceleration of 59m/s2, for 5 cycles in the direction of each No electrical discontinuity of 1µs min. of the 3 axis. No damage, cracks or parts dislocation. Acceleration of 735m/s2, 11ms duration, sine half-wave 8. Shock waveform, 3 cycles in each of 3 axes. Insulation Resistance 9. Humidity 10Mø min. (High Temperature) 96 hours at temperature of 40ç and humidity of 95%. (Steady state) 500Mø min. (When Dry) No damage, cracks or parts dislocation. Temperature : -40˚C/+5 to +35˚C/+105˚C/+5 to +35˚C 10. Temperature cycle Contact resistance : 25mø max. (Center) Time : 30min. / 3min. / 30min. / 3min. 15mø max. (Outer) 5 cycles V.S.W.R. 11. Salt spray 5% salt water solution, 48 hours Satisfies initial value *V.S.W.R. Measurement System The above V.S.W.R. standard values were measured using the measurement connection shown below. Note 1 : C able type connectors were measured with SMA conversion adapters attached to both ends of the harness product of a suitable 100cm cable. Note 2 : B oard type connectors were mounted to a 50ø glass epoxy board and measurements were conducted with SMA conversion adapters attached. ■ Material / Finish ●Plug-right angle Part Material Finish/Remarks Shell Phosphor bronze Silver plated / Nickel plated (Contact gold plated) (U.FL(A)) PBT, Color : Gray UL94HB (LP(V)-040HF) Insulator LCP, Color : Milky-white UL94V-0 (040HF,066HF, 068HF, 062HF, 088HF) LCP (Black) UL94V-0 (U.FL(A)) Female center contact Phosphor bronze Gold plated ●Receptacle Part Material Finish/Remarks Shell Phosphor bronze Silver plated (U.FL-R-SMT-1) / Gold Plated (U.FL-R-SMT-K) LCP, Color : Milky-white UL94V-0 (U.FL-R-SMT-1) Insulator LCP (Black) UL94V-0 (U.FL-R-SMT-K) Male center contact Brass Gold plated 2

U.FL Series●Light Weight Micro SMT Coaxial Connector, 1.9mm to 2.4mm Mated Height B B ■ Recommended Recommended Receptacle PCB Mounting Metal Mask GND GND Pattern Dimensions No conductive traces in this area SIG Ø2 4±0.05 3.9±0.05 1.9±0.05 2.1±0.05 5 5 0 1.20.35 203..66 Max(Note) G±0.05ND 2.2±0.05 2±0.05 1.1±0. 1.2 1 GND (3.1) 2.61.8 ±0.05 1S±I0G.05 0.8±0.03 5±0.05 5 8 1.0 0. Mask Thickness : 0.1mm/0.12mm U.FL-R-SMT-1 Shell : Silver plated Part No. HRS No. Packaging Weight / EA (Note 1) The sales unit of the (01) specification receptacle is one pack (100 units per pack). Please order based on the number of packs. U.FL-R-SMT-1(01) 331-0472-2 01 100 pcs/pack (Note 2) The sales unit of the (60) specification receptacle is 1 reel (4,000 pcs per U.FL-R-SMT-1(60) 331-0472-2 60 4,000 pcs/reel 15.7/mg reel) so please order based on the number of reels. (Note 3) The sales unit of the (80) specification receptacle is 1 reel (10,000 pcs per U.FL-R-SMT-1(80) 331-0472-2 80 10,000 pcs/reel reel), so please order based on number of reels. (Note 4) Tolerance value of mold resin applied to center contact. B B Recommended Recommended GND PCB Mounting Metal Mask Pattern Dimensions GND GND 5 Ø2 SIG 1±0.05 14.9±±00.0.055SIG Ntraoc ceosn idnu tchtiisv ea rea 23..19±±00..0055 0.85±0.0 5 2 1.0.35 203..66 Max(4)注 2±0.05 2.2±0.05 2±0.05 2.2±0.05 2 1. GND GND (3.1)2.61.8 5±0.05 1S±IG0.05 0.8±0.03 85±0.05 1.0 0. Mask Thickness : 0.1mm/0.12mm Shell : Gold plated U.FL-R-SMT-K Part No. HRS No. Packaging Mass (Note 5) The sales unit of the receptacle is 1 reel (10,000 pcs per reel), so please order based on the number of reels. U.FL-R-SMT-K(800) 480-0761-0 00 10,000 pcs per reel 15.7/pc Embossed Carrier Tape Dimensions(IEC 60286-3 compliant) Embossed Carrier Tape Dimensions BReel Dimensions 2 4 Ø1.5 Center contact Material： PS(Black) U.FL-R-SMT-1 13.5 5 PS(White) U.FL-R-SMT-K 7 1. 5 5. 2 1 0 3 3 Ø 8 U.FL-R-SMT-1(60) : 8mm pitch A 1.75 2 4 Ø1.5 Center contact A(SCALE FREE) 25.5 2 Ø13 1 Unreeling direction Ø21 4 U.FL-R-SMT-1(80) / U.FL-R-SMT-K(800) : 4mm pitch 3

U.FL Series●Light Weight Micro SMT Coaxial Connector, 1.9mm to 2.4mm Mated Height ■ Plug (Center Solder Type) ◆U.FL Plug ・The center contact is gold plated and the outer contact is silver plated. U.FL-LP-066HF U.FL-LP-040HF U.FL-LP(V)-040HF U.FL-LP-062HF U.FL-LP-088HF U.FL-LP-068HF Part No. 3 3 2.8 2.8 3 Size 4 4 3.4 4 5 1.93 1.93 1.5 1.8 1.85 2.5mm Max. 2.5mm Max. 2.0mm Max. 2.4mm Max. 2.4mm Max. Mated Height (2.4mm Nom.) (2.4mm Nom.) (1.9mm Nom.) (2.3mm Nom.) (2.3mm Nom.) Applicable Dia. 1.13mm and Dia. 0.81mm Dia. 0.81mm Dia. 0.95mm Dia. 1.37mm cable Dia. 1.32mm Weight (mg) 54 59 35 45.5 72 ● Cable Guide Cable Specification Cable Description Inner Dielectric Outer Flame Retardant Nominal attenuation (dB/m) Type Jacket Conductor* Diameter Conductor* Grade At 3GHz At 6GHz At 8GHz Dia.0.81mm 7/0.05 SA Dia.0.4mm Single 04 5.4 8.0 10.2 Coaxial Cable (AWG#36) FEP Shield TA Dia.1.13mm 7/0.08 SA Dia.0.68mm Single 068 3.73 5.44 6.5 Coaxial Cable (AWG#32) FEP Shield TA Dia.1.32mm 7/0.08 SA Dia.0.66mm Double 066 3.8 5.6 7.1 Coaxial Cable (AWG#32) FEP Shield TA FEP VW-1 Dia.0.95mm 7/0.071 SA Dia.0.62mm Tape, single 062 3.1 4.4 5.3 Coaxial Cable (AWG#33) FEP Shield TA Dia.1.37mm 7/0.102 SA Dia.0.88mm Single 088 2.8 4.3 5.0 Coaxial Cable (AWG#30) FEP Shield TA Dia.1.37mm 7/0.102 SA Dia.0.88mm Tape, Single Coaxial Cable 088 2.5 3.4 3.8 (Low Loss) (AWG#30) FEP/PTFE Shield TA (Attenuation is a reference value.) * SA : Silver plated annealed copper wire, TA : Tin plated annealed copper wire [Plugs can be ordered only as terminated cable assemblies.] 4

U.FL Series●Light Weight Micro SMT Coaxial Connector, 1.9mm to 2.4mm Mated Height ■ Plug (No Solder Typee) ◆U.FL(A) Plug ・Harness product guarantees frequency up to 18GHz and impedance matching. ・The inner and outer contact portion are gold plated (the main body is nickel plated) ・The receptacle can be mated with U.FL-R-SMT-1 (shell: silver plated) and U.FL-R-SMT-K (shell : gold plated). ・The SMA inspection adapter and extraction tool are only for the U.FL(A) Plug. U.FL(A)-LP(P)-068 U.FL(A)-LP(P)-088 6 6 6 6 Part No. 2. 2. Size 5.9 5.9 1.73 1.73 Mated Height 2.2mm Max. (2.1mm Nom.) Applicable cable Ø1.13 Ø1.37 Weight (mg) 56 58 4 HRS V.S.W.R. 3.5 Company A V.S.W.R. ※Cable Length = 100mm 100 m m Measuring Adapter W.R. 3 HRMP-U.FLAJ S. 2.5 V. 2 Reference Plane APC 3.5 1.5 1 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 Frequency (GHz) ■ U.FL(A) Inspection SMA Conversion Adapter 　(Mated Portion: U.FLA Jack- SMA Plug) 8HEX 10.7 Part No. HRS No. HRMP-U.FLAJ 311-2400-0 (Note) Since the U.FL side mated portion has a weaker lock than standard products, it cannot be used for purposes other than performance measurement. ■ U.FL(A) Insertion/Extraction Tool 　For removing from the mated condition 12 3.710 12 38 10 2 Part No. HRS No. U.FL(A)-LP-IN.OUT 331-2401-0 5

U.FL Series●Light Weight Micro SMT Coaxial Connector, 1.9mm to 2.4mm Mated Height ■ The Procedure for ordering patch cord Please select the specifications in 3 steps. No need product name for ordering patch cords. STEP 1 : Single end or both ends ［Double ended cable assembly］ ［Single ended cable assembly］ L L Ordering information STEP 2 : Cable and mating height Insertion Loss comparison between each cable size【dB/m】 No. Jacket diameter Cable color Mating height (Max) Plug 0 1 Ø1.37 Gray / Black 2.3mm (2.4mm) U.FL-LP-088HF -1 2 Ø1.37 Low Loss 3 Ø1.37 Gray / Black 2.1mm (2.2mm) U.FL(A)-LP(P)-088 B) -2 4 Ø1.32 Gray / Black 2.4mm (2.5mm) U.FL-LP-066HF d -3 5 Ø1.13 Gray / Black 2.4mm (2.5mm) U.FL-LP-068HF SS ( -4 6 Ø1.13 Gray / Black 2.1mm (2.2mm) U.FL(A)-LP(P)-068 O 7 Ø0.95 Gray / Black 2.3mm (2.4mm) U.FL-LP-062HF N L -5 O -6 8 Ø0.81 White / Black 2.4mm (2.5mm) U.FL-LP-040HF TI 9 Ø0.81 White / Black 2.0mm (1.9mm) U.FL-LP(V)-040HF ER -7 S N -8 STEP 3 : Cable length (mm) I -9 ● Standard tolerances for (L) -10 0 1 2 3 4 5 6 7 8 (L)(mm) Standard tolera(mm) *L=35 to 200 ±4 Frequency (GHz) L=201 to 500 ±8 L=501 to 1000 ±12 L=Longer than 1000 ±1.5% of (L) Note : Minimum available length(L) is 35mm. (U.FL(A) is from 80 to 1200mm) ■ Patch cord name example Characters that are not red are for Hirose internal identification. ● ● Plug (Center Solder Type) Plug (No Solder Type) 　U.FL-2LPHF6-04N1TV-A-300 　 UFL-2LPA-068Y2T-A-300 Cable length : STEP 3 Cable length : STEP 3 Cable type : STEP 2 Cable type : STEP 2 Double ended or single ended : STEP 1 Double ended or single ended : STEP 1 Series name Series name STEP 1 Example Notation ［Double ended］ ［Single ended］ U.FL-2LPHF6-04N1TV-A-300 U.FL-LPHF6-04N1TV-A-300 STEP 2 Example Notation 1 Cable-mating height 2 Cable color ［Dia. 1.37 cable (088 cable)］ 〜Except Dia. 0.81 cable〜 088 is listed in the third block representing the cable type. ［Gray］ U.FL-2LPHF6-088N1T-A-300 (Plug : U.FL) 1 is listed in the third block representing the cable type. UFL-2LPA-088Y1T-A-300 (Plug : U.FL(A)) U.FL-2LPHF6-062N1D-A-300 (Plug : U.FL) ［Black］ ［Dia. 1.37 Cable (088) Low Loss］ 2 is listed in the third block representing the cable type. Block 3 that shows the cable times says 088. U.FL-2LPHF6-062N2D-A-300 (Plug : U.FL) UFL-2LPHF6-088N1PD-A-300 (Plug : U.FL) ［Dia. 1.32 cable (066 cable)］ 〜Dia. 0.81 cable〜 066 is listed in the third block representing the cable type. ［White］ U.FL-2LPHF6-066N1-A-300 (Plug : U.FL) 1 is listed in the third block representing the cable type. ［Dia. 1.13 cable (068 cable)］ U.FL-2LPHF6-04N1TV-A-300 (Plug : U.FL) 068 is listed in the third block representing the cable type. ［Black］ U.FL-2LPHF6-068N1T-A-300 (Plug : U.FL) 2 is listed in the third block representing the cable type. UFL-2LPA-068Y1T-A-300 (Plug : U.FL(A)) U.FL-2LPHF6-04N2TV-A-300 (Plug : U.FL) ［Dia. 0.95 cable (062 cable)］ 062 is listed in the third block representing the cable type. U.FL-2LPHF6-062N1D-A-300 (Plug : U.FL) ［Dia. 0.81 cable (040 cable)］ 04 is listed in the third block representing the cable type. When the height is 1.9mm, V enters affer LP. Dot does not needed for U.FL series name. U.FL-2LPHF6-04N1TV-A-300 : Mating height 2.4mm UFL-2LPVHF6-04N1TV-A-300 : Mating height 1.9mm STEP 3 Example Notation Cable length is written in millimeters at the end. EX : 300mm U.FL-2LPHF6-088N1T-A-300 6

U.FL Series●Light Weight Micro SMT Coaxial Connector, 1.9mm to 2.4mm Mated Height ■ Conversion Adapter ● SMA Conversion Adapter (Mated Portion : UFL Jack - SMA Plug) (10.7) 8HEX Part No. HRS No. HRMP-U.FLJ(40) 311-0300-2 40 (Note) Since the U.FL side mating portion has a weaker lock than standard products, it cannot be used for purposes other than performance measurement. ●S MA Conversion Adapter (Mated Portion : U.FL Plug - SMA Jack) 14.05 6 (4.05) 5.6 5 3 6. Ø 1/4-36UNS-2A Part No. HRS No. HRMJ-U.FLP(40) 311-0301-5 40 (Note) Since the U.FL side mating portion has a weaker lock than standard products, it cannot be used for purposes other than performance measurement. ●S MA Conversion Adapter (Mated Portion : U.FL Plug - SMA Jack) (18.6) 6 (4) 5.5 1/4-36UNS-2A Part No. HRS No. HRMJ-U.FLP-ST1(40) 311-0385-5 40 This connector is used by pressing the mating portion of the U.FL side with the mating portion of U.FL-R-SMT. ●S MA Conversion Adapter (Mated Portion: SMA Jack (Measuring Device Connection Side) -SMA Plug) 2×Ø2.3 6 2016 10.8 Ø 8 4.4 18.84 11.6 31.3 Part No. HRS No. HRM-PA-PJ(F)-1(40) 323-0805-9 40 (Note) HRMJ-U.FLP-ST1 aborbs misalignment when mated with the plug (coupling side) and connecting the jack with the measuring device. (Refer to next page) 7

U.FL Series●Light Weight Micro SMT Coaxial Connector, 1.9mm to 2.4mm Mated Height ●P robe for Inspect of Multiple Narrow Pitch Receptacles (Mated Portion : U.FL Plug (No lock) - ML51 Jack) 2 ×Ø2.4 4 Ø 12 8.5 8 3. Ø 4.2 1.75 15.5 22.8 Part No. HRS No. U.FLP-ML51.J-PA(F)-ST 311-0446-8 (Note) Hirose's ML51 is used for the measuring device interface. It is ideal for simultaneous inspection of multiple narrow pitch mounted receptacles. ●H arness for Narrow Pitch Probe Connection (Mated Portion : SMA Plug (Measuring Device Connection Side) - ML55 Plug 350±8 Part No. HRS No. HRMP-ML51LP-DTR178-350RS 321-4926-2 01 (Note) Used to connect U.FLP-ML51J-PA(F)-ST and the measuring device. It is recommended to provide slack to the cable length so that it can absorb misalignment smoothly. ■ Inspection Probe ● HRMJ-U.FLP-ST1 and HRM-PA-PJ(F)1 Combination and Usage 12mm min A) ( Flange to Board Surface （A） Recommendation for Measurement 32.5±0.2 Starting Load 33.2 Shortest Pitch for Adjacency ● U.FLP-ML51.J-PA(F)-ST and HRMP-ML51LP-DTR178-350RS Combination and Usage 4.5mm min (A) Flange to Board Surface （A） Recommendation for Measurement 15.1±0.2 Beginning Load 16 Shortest Pitch for Adjacency ＊For the inspection probe do not tilt the tip contact from the tensile load of the connecting cable. 8

U.FL Series●Light Weight Micro SMT Coaxial Connector, 1.9mm to 2.4mm Mated Height ■ Inspection Receptacle Receptacle for inspecting the conduction and withstanding voltage of harness products. 12.9 (7.9) 5 7HEX (4.4) 1 M5∞0.5 Part No. HRS No. U.FL-R-1 331-0466-0 (Note 1) Product cannot be used for purposes other than conduction or withstanding voltage inspection because there is no lock on the mating portion. ■ Inspection Assistance Device ●S MA Mating Push On Conversion Adapter Push On Mating Portion (Mates with SMA-J) 8 7.Ø9Ø 8 6 3 10.6 Part No. HRS No. HRMP(PO)-HRMJ 323-0741-8 Coverts SMA plug mating portion to push on type, reducing the number of steps required for repeated SMA mating. ■TooIln fosr pelurgt iinosenrt iTono. ol Hole Ødi2 st(inTghurisohiungg hf)rom W.FL-LP-IN 0 1 Ø 8 100 Part No. HRS No. U.FL-LP-IN 331-0334-9 B Extraction Tool (90) Tool for unmating. 50 15 Ø 5 U.FL Marking U.FL U.FL/V 1 2. Part No. HRS No. Applicable Plug U.FL-LP-N-2(V) 331-0494-5 U.FL-LP-040HF, 066HF, 088HF, 068HF U.FL-LP(V)-N-2 331-0493-2 U.FL-LP-062HF, U.FL-LP(V)-040HF (Note) U.FL-LP-N is also used with E.FL Series. 9

U.FL Series●Light Weight Micro SMT Coaxial Connector, 1.9mm to 2.4mm Mated Height Usage Precautions 1. Plugs 1) To disconnect connectors, insert the end portion of U.FL-LP-N-2 and U.FL-LP(V)-N-2 under the connector flanges and pull off vertically, in the direction of the connector mating axis. However for U.FL(A) (Solderless connection type, use U.FL(A)-LP-IN.OUT and Extraction Tool pull out vertically. When removing the connector directly, hold the (1) Mating / unmating connector lid and pull out vertically in relation to the connector mating U.FL Cable Assembly axis. (Be careful not to damage the connector with fingers or nails.) 2) To mate the connectors, the mating axes of both connectors must be aligned and the connectors can be mated. The "click" will confirm fully mated connection.Do not attempt to insert on an extreme angle. U.FL-R-SMT-1 After the connectors are mating, do not apply a load to the cable in excess of the values indicated in the diagram below. U.FL-LP 1N max (U.FL-LP(V)-040HF, U.FL-LP-062HF) Cable Assembly 2N max (U.FL-LP-040HF, U.FL-LP-066HF, U.FL-LP-068HF, U.FL-LP-088HF, U.FL(A)-LP(P)-068, U.FL(A)-LP(P)-088) (2) Pull forces on the cable U.FL-R-SMT-1 after connectors are 3N max (U.FL-LP(V)-040HF, U.FL-LP-062HF) mated. 4N max (U.FL-LP-040HF, U.FL-LP-066HF, U.FL-LP-068HF, U.FL-LP-088HF, U.FL(A)-LP(P)-068, U.FL(A)-LP(P)-088) 1N max (U.FL-LP(V)-040HF, U.FL-LP-062HF) 2N max (U.FL-LP-040HF, U.FL-LP-066HF, U.FL-LP-068HF, U.FL-LP-088HF, U.FL(A)-LP(P)-068, U.FL(A)-LP(P)-088) (3) Precautions Do NOT forcefully twist or deform wires. 2. Receptacles q The temperature of the printed circuit 250 ç max. for [ç] 10 seconds board surface temperature at the points of contact with the terminals. 260 240 230ç w Reflow soldering should be 220 Preheat 220ç performed at a printed circuit surface 200 (1) Recommended reflow 180 (130 to 180ç) temperature of 250°C max. 160 e In individual applications the actual temperature profile 140 temperature may vary, depending on 120 100 120 seconds max. 50 seconds max. the solder paste type, volume / 80 60 seconds max. thickness and board size / thickness. Consuly your solder paste and equipment manufacturer for specific Time recommendations. (2) Recommended manual Manual soldering : 350˚C for 5 seconds soldering (3) Recommended metal 0.1 to 0.12mm mask thickness (4) Reflow cycles 2 times 3. Operating environment and storage conditions The connectors are not designed to operate in the following environments : (cid:129) Exposed to a excessive amounts of fine particles and dust (1) Operating environment (cid:129) Regions and places having a high density of sulfur dioxide, hydrogen sulfide, nitrogen dioxide or other corrosive gasses. (cid:129) Environments having large rapid variations in temperature. Store in the Hirose Electric packaging. Temperature : -10 to +40ç, Humidity : 85% max. (2) Storage conditions - Use within 6 months of delivery. Receptacle Receptacles for which the storage period has elapsed must be tested for solderability to the PC board mounting surface. (3) Silver Plating Discoloration occurs only on the plating surface. Since the contact portion is wiped, there is no effect on the Discoloration electrical contact. 10

U.FL Series●Light Weight Micro SMT Coaxial Connector, 1.9mm to 2.4mm Mated Height ■ Standard Connectors that Connect with U.FL SMA Cable Type Straight Plug 15 8HEX B 2 S- N U 6 3 4- 1/ Part No. HRS No. Applicable cable Notes HRM-200-040PBN（40） 323-0790-3 40 Dia. 0.81 type SMA HRM-200-066PBN（40） 323-0791-6 40 Dia. 1.13, Dia.1.32 type (Male Contact) HRM-200-088PBN（40） 323-0800-5 40 Dia. 1.37 type Straight Jack 1/4-36UNS-2A 17 4.5 8 8HEX Part No. HRS No. Applicable cable Notes HRM-200-040JBN（40） 323-0792-9 40 Dia. 0.81 type SMA HRM-200-066JBN（40） 323-0793-1 40 Dia. 1.13, Dia.1.32 type (Female Contact) HRM-200-088JBN（40） 323-0801-8 40 Dia. 1.37 type ●Panel mount Jack (Four Screws) 17 12.7 9.55 1/4-36UNS-2A 8.64 1.7 4-Ø2.6 4 6. Ø Part No. HRS No. Applicable cable Notes HRM-200-040PJ4BN（40） 323-0795-7 40 Dia. 0.81 type SMA HRM-200-066PJ4BN（40） 323-0796-0 40 Dia. 1.13, Dia.1.32 type (Female Contact) HRM-200-088PJ4BN（40） 323-0803-3 40 Dia. 1.37 type 11

U.FL Series●Light Weight Micro SMT Coaxial Connector, 1.9mm to 2.4mm Mated Height 17 9.55 8 1.7 1/4-36UNS-2A ●Panel mount Jack (Two Screws) 4 2∞Ø2.6 6. Ø Part No. HRS No. Applicable cable Notes HRM-200-040PJ2BN（40） 323-0794-4 40 Dia. 0.81 type SMA HRM-200-066PJ2BN（40） 323-0788-1 40 Dia. 1.13, Dia.1.32 type (Female Contact) HRM-200-088PJ2BN（40） 323-0802-0 40 Dia. 1.37 type 17 1/4-36UNS-2A 8HEX BPanel Cutouts 5.9+0.1 ●Panel mount Jack (Bulkhead) 1.5 11 5.85 0 0 1 Ø Ø6.4+0.1 0 Part No. HRS No. Applicable cable Notes HRM-200-040BPJBN（40） 323-0797-2 40 Dia. 0.81 type SMA HRM-200-066BPJBN（40） 323-0798-5 40 Dia. 1.13, Dia.1.32 type (Female Contact) HRM-200-088BPJBN（40） 323-0804-6 40 Dia. 1.37 type ●Panel mount Jack 16.98 8HEX 　 (Bulkhead, Waterproof Mounting Surface Type) 2 11 5.85 5.9+ 00.1 1/4-36UNS-2A 2 1 Ø Ø6.4+0.1 0 Part No. HRS No. Applicable cable Notes HRM-200-040WBPJBN 323-0945-8 Dia. 0.81 type SMA HRM-200-066WBPJBN 323-0946-0 Dia. 1.13, Dia.1.32 type (Female Contact) HRM-200-088WBPJBN 323-0920-7 Dia. 1.37 type 12

U.FL Series●Light Weight Micro SMT Coaxial Connector, 1.9mm to 2.4mm Mated Height ■ SMA-U.FL Cable Assembly Representative Product SMA Straight Plug-U.FL Plug L Part No. HRS No. Cable (Color) Ｌmm Notes HRMP-UFLHF6-04N2TV-A200RS 321-0753-0-04 Ø0.81（Black） HRMP-UFLHF6-068N2T-A200RS 321-0854-0-02 Ø1.13（Black） SMA 200±4 (Female HRMP-UFLHF6-066N2-A200RS 321-0862-0-05 Ø1.32（Black） Contact) HRMP-UFLHF6-088N2T-A200RS 321-0755-0-07 Ø1.37（Black） SMA Straight Jack-U.FL Plug L Part No. HRS No. Cable (Color) Ｌmm Notes HRMJ-UFLHF6-04N2TV-A200RS 321-0881-0-02 Ø0.81（Black） HRMJ-UFLHF6-068N2T-A200RS 321-0869-0-03 Ø1.13（Black） SMA 200±4 (Male HRMJ-UFLHF6-066N2-A200RS 321-0868-0-02 Ø1.32（Black） Contact) HRMJ-UFLHF6-088N2T-A200RS 321-0904-0-04 Ø1.37（Black） SMA Panel Mount Jack (Four Screws)-U.FL Plug L Part No. HRS No. Cable (Color) Ｌmm Notes HPJ-UFLHF6-04N2TV-A200RS 321-0965-0-02 Ø0.81（Black） HPJ-UFLHF6-068N2T-A200RS 321-3660-0-02 Ø1.13（Black） SMA 200±4 (Female HPJ-UFLHF6-066N2-A200RS 321-0905-0-01 Ø1.32（Black） Contact) HPJ-UFLHF6-088N2T-A200RS 321-0911-0-03 Ø1.37（Black） ◆For cable lengths, cable colors and connector combinations other than those listed above, please contact a Hirose representative. 13

U.FL Series●Light Weight Micro SMT Coaxial Connector, 1.9mm to 2.4mm Mated Height SMA Panel Mount Jack (Two Screws)-U.FL Plug L Part No. HRS No. Cable (Color) Ｌmm Notes HPJ2-UFLHF6-04N2TV-A200RS 321-0969-0-03 Ø0.81（Black） HPJ2-UFLHF6-068N2T-A200RS 321-1083-0-03 Ø1.13（Black） SMA 200±4 (Female HPJ2-UFLHF6-066N2-A200RS 321-1084-0-03 Ø1.32（Black） Contact) HPJ2-UFLHF6-088N2T-A200RS 321-0812-0-04 Ø1.37（Black） SMA Panel Mount Jack (Bulkhead)-U.FL Plug L 5.9+0.1 0 Ø6.4+0.1 0 L 5.9+0.1 0 Ø6.4+0.1 0 SMA Side: Die Cast Product 11.5 1.5 17 Part No. HRS No. Cable (Color) Ｌmm Notes HBPJ-UFLHF6-04N2TV-A200RS 321-0964-0-02 Ø0.81（Black） HBPJD-UHF6-068N2T-A200（Note） 321-5463-0-02 Ø1.13（Black） SMA 200±4 (Female HBPJD-UHF6-066N2-A200（Note） 321-5464-0-02 Ø1.32（Black） Contact) HBPJD-UHF6-088N2T-A200（Note） 321-5600-0-02 Ø1.37（Black） (Note) Die Cast Body on SMA Side (Different product than those listed on the SMA Cable Type Page) SMA Panel Mount Jack (Bulkhead, Waterproof Mounting Surface)-U.FL Plug L 5.9+0.1 0 Ø6.4+0.1 0 Part No. HRS No. Cable (Color) Ｌmm Notes HWBPJ-UHF6-068N2T-A-200 321-1235-0-03 Ø1.13（Black） SMA 200±4 HWBPJ-UFLHF6-088N2T-A200 321-0760-0-04 Ø1.37（Black） (Female Contact) ◆For cable lengths, cable colors and connector combinations other than those listed above, please contact a Hirose representative. 14

U.FL Series●Light Weight Micro SMT Coaxial Connector, 1.9mm to 2.4mm Mated Height ■ Standard Connectors that Connect with U.FL SMA/R Cable Type /R : Reverse Polarity SMA Connector 15 8HEX Straight Plug B 2 S- N U 6 3 4- 1/ Part No. HRS No. Applicable cable Notes SMA(R)-200-040PBN 323-0925-0 Dia. 0.81 type SMA Reverse SMA(R)-200-066PBN 323-0930-0 Dia. 1.13, Dia.1.32 type (Female SMA(R)-200-088PBN 323-0905-3 Dia. 1.37 type Contact) Straight Jack 17 4.5 8 8 HEX 1/4-36UNS-2A Part No. HRS No. Applicable cable Notes SMA(R)-200-040JBN 323-0926-3 Dia. 0.81 type SMA Reverse SMA(R)-200-066JBN 323-0931-3 Dia. 1.13, Dia.1.32 type (Male SMA(R)-200-088JBN 323-0904-0 Dia. 1.37 type Contact) 17 12.7 9.55 8.64 1.7 1/4-36UNS-2A Panel Mount Jack (Four Screws) 4 ∞ Ø 2.6 Part No. HRS No. Applicable cable Notes SMA(R)-200-040PJ4BN 323-0928-9 Dia. 0.81 type SMA Reverse SMA(R)-200-066PJ4BN 323-0932-6 Dia. 1.13, Dia.1.32 type (Male SMA(R)-200-088PJ4BN 323-0934-1 Dia. 1.37 type Contact) 15

U.FL Series●Light Weight Micro SMT Coaxial Connector, 1.9mm to 2.4mm Mated Height 17 9.55 1.7 8 1/4-36UNS-2A Panel Mount Jack (Two Screws) 2 2. 1 2∞Ø2.6 Part No. HRS No. Applicable cable Notes SMA(R)-200-040PJ2BN 323-0929-1 Dia. 0.81 type SMA Reverse SMA(R)-200-066PJ2BN 323-0933-9 Dia. 1.13, Dia.1.32 type (Male SMA(R)-200-088PJ2BN 323-0935-4 Dia. 1.37 type Contact) 17 8HEX BPanel Cutouts 1.5 11 5.85 Panel Mount Jack (Bulkhead) 1/4-36UNS-2A 5.9+ 00.1 0 1 Ø Ø6.4+ 0 .01 Part No. HRS No. Applicable cable Notes SMA(R)-200-040BPJBN 323-0927-6 Dia. 0.81 type SMA Reverse SMA(R)-200-066BPJBN 323-0902-5 Dia. 1.13, Dia.1.32 type (Male SMA(R)-200-088BPJBN 323-0901-2 Dia. 1.37 type Contact) Panel Mount Jack 17 8HEX 　(Bulkhead, Waterproof Mounting Surface Type) 2 11 5.85 5.9+0.1 0 1/4-36UNS-2A 2 Ø1 6.4+ 0 . 10 Ø Part No. HRS No. Applicable cable Notes SMA(R)-200-040WBPJBN 323-0947-3 Dia. 0.81 type SMA Reverse SMA(R)-200-066WBPJBN 323-0948-6 Dia. 1.13, Dia.1.32 type (Male SMA(R)-200-088WBPJBN 323-0949-9 Dia. 1.37 type Contact) 16

U.FL Series●Light Weight Micro SMT Coaxial Connector, 1.9mm to 2.4mm Mated Height ■ Standard Connectors that Connect with U.FL TNC Cable Type Panel Jack (Bulkhead, Waterproof Panel Mounting Surface Type) 28.3118.14 15.9 BPanel Cutouts 7/16-28UNEF-2A Ø12.83+0 .015 12.01−+00..025 Part No. HRS No. Applicable cable TNC-WBPJ-088-1 313-0004-0 Ø1.37 cable *Please order the product after designating the harness specifications including product length, etc. TNC/R Cable Type /R : Reverse Polarity SMA Connector Panel Jack (Bulkhead, Waterproof Panel Mounting Surface Type) 28.31 18.14 15.9 BPanel Cutouts 7/16-28UNEF-2A Ø12.83+0 .015 12.01+−00..025 Part No. HRS No. Applicable cable TNC(R)-WBPJ-088 313-0003-0 Ø1.37 cable *Please order the product after designating the harness specifications including product length, etc. TNC/R Conversion Adapter /R : Reverse Polarity SMA Connector Panel Mount Adapter (Two Screws) (22.25) 8 14.25 (2.25) 12.7 7/16-28UNEF-2A U.FL TNC(R)-J 6.9 18 Ø 2∞No.3-56UNF-2B Part No. HRS No. Notes TNC(R)J-U.FLJ-PA-2 311-0416-7 TNC Reverse (Male Contact) 17

U.FL Series●Light Weight Micro SMT Coaxial Connector, 1.9mm to 2.4mm Mated Height SMA Conversion Adapter Note : Please avoid mating with the U.FL(A) plug. 17.9 12.7 Panel Mount Adapter (Four Screws) 9.55 8.64 1.7 1/4-36UNS-2A 4 ∞ Ø 2.6 Part No. HRS No. Notes SMA HRMJ-U.FLJ-PA4 311-0465-2 (Female Contact） 17.9 9.55 8 1.7 Panel Mount Adapter (Two Screws) 1/4-36UNS-2A 2 2. 1 2∞Ø2.6 Part No. HRS No. Notes SMA HRMJ-U.FLJ-PA2 311-0467-8 (Female Contact） Panel Mount Adapter (Bulkhead) 17.9 8HEX 1.5 11.5 1/4-36UNS-2A 5.85 5.9+0.1 0 Ø6.4 + 00.1 Part No. HRS No. Notes SMA (Female Contact） HRMJ-U.FLJ-BPAD-5 311-1004-0 Body : Die Cast Type PCB Mount Adapter 6 16 1/4-36UNS-2A BPanel Cutouts 5.08±0.05 12.79.76.4 4∞Ø1.5+ 00.1 5.08±0.05 5.08 Part No. HRS No. Notes HRMJ-U.FLJ-PC 311-0411-3 Nickel Exterior 18

U.FL Series●Light Weight Micro SMT Coaxial Connector, 1.9mm to 2.4mm Mated Height SMA/R Conversion Adapter R : Reverse Polarity SMA Connector Note : Please avoid mating with the U.FL(A) plug. 17.9 12.7 9.55 8.64 Panel Mount Adapter (Four Screws) 1.7 1/4-36UNS-2A 4∞Ø2.6 Part No. HRS No. Notes Reverse Polarity SMA SMA(R)J-U.FLJ-PA4 311-0466-5 (Male Contact） 17.9 9.55 8 Panel Mount Adapter (Two Screws) 1.7 1/4-36UNS-2A 2 2. 1 2∞Ø2.6 Part No. HRS No. Notes Reverse Polarity SMA SMA(R)J-U.FLJ-PA2 311-0468-0 (Male Contact） Panel Mount Adapter (Bulkhead) 17.9 8HEX BPanel Cutouts 1.5 11 5.85 1/4-36UNS-2A 5.9+ 00.1 0 1 Ø Ø6.4+ 0 .01 Part No. HRS No. Notes Reverse Polarity SMA SMA(R)J-U.FLJ-BPA-4 311-0464-0 (Male Contact） 19

U.FL Series●Light Weight Micro SMT Coaxial Connector, 1.9mm to 2.4mm Mated Height USA: USA: USA: HIROSE ELECTRIC (U.S.A.), INC. HEADQUARTERS CHICAGO OFFICE HIROSE ELECTRIC (U.S.A.), INC. SAN JOSE OFFICE HIROSE ELECTRIC (U.S.A.), INC. DETROIT OFFICE (AUTOMOTIVE) 2300 Warrenville Road, Suite 150, 2841 Junction Ave, Suite 200 17197 N. Laurel Park Drive, Suite 253, Downers Grove, IL 60515 San Jose, CA. 95134 Livonia, MI 48152 Phone : +1-630-282-6700 Phone : +1-408-253-9640 Phone : +1-734-542-9963 http://www.hirose.com/us/ Fax : +1-408-253-9641 Fax : +1-734-542-9964 http://www.hirose.com/us/ http://www.hirose.com/us/ USA: THE NETHERLANDS: GERMANY: HIROSE ELECTRIC (U.S.A.), INC. BOSTON OFFICE HIROSE ELECTRIC EUROPE B.V. HIROSE ELECTRIC EUROPE B.V. GERMAN BRANCH 300 Brickstone Square Suite 201, Hogehillweg #8 1101 CC Amsterdam Z-O Schoenbergstr. 20, 73760 ostfildern Andover, MA 01810 Phone : +31-20-6557460 Phone : +49-711-456002-1 Phone : +1-978-662-5255 Fax : +31-20-6557469 Fax : +49-711-456002-299 http://www.hirose.com/eu/ http://www.hirose.com/eu/ GERMANY: GERMANY: FRANCE: HIROSE ELECTRIC EUROPE B.V. NUREMBERG OFFICE HIROSE ELECTRIC EUROPE B.V. HANOVER OFFICE HIROSE ELECTRIC EUROPE B.V. PARIS OFFICE Neumeyerstrasse 22-26, 90411 Nurnberg Bayernstr. 3, Haus C 30855 Langenhagen, Germany 130 Avenue Joseph Kessel, Bat E, 78960 Phone : +49-911 32 68 89 63 Phone : +49-511 97 82 61 30 Voisins le Bretonneux, France Fax : +49-911 32 68 89 69 Fax : +49-511 97 82 61 35 Phone : +33-1-85764886 http://www.hirose.com/eu/ http://www.hirose.com/eu/ Fax : +33-1-85764823 http://www.hirose.com/eu/ UNITED KINGDOM: CHINA: CHINA: HIROSE ELECTRIC EUROPE BV (UK BRANCH) HIROSE ELECTRIC (CHINA) CO., LTD. (SHANGHAI, HEADQUARTERS) HIROSE ELECTRIC (CHINA) CO.,LTD. BEIJING BRANCH 4 Newton Court, Kelvin Drive, Knowlhill, 18, Enterprise Center Tower 2, 209# Gong He A1001, Ocean International Center, Building 56# East 4th Milton Keynes, MK5 8NH Road, Jing’an District, Shanghai, CHINA 200070 Ring Middle Road, ChaoYang District, Beijing, 100025 Phone : +44-1908 202050 Phone : +86-21-6391-3355 Phone : +86-10-5165-9332 Fax : +44-1908 202058 Fax : +86-21-6391-3335 Fax : +86-10-5908-1381 http://www.hirose.com/eu/ http://www.hirose.com/cn/ http://www.hirose.com/cn/ CHINA: HONG KONG: TAIWAN: HIROSE ELECTRIC (CHINA) CO., LTD. SHENZHEN BRANCH HIROSE ELECTRIC HONGKONG TRADING CO., LTD. HIROSE ELECTRIC TAIWAN CO., LTD. Room 09-13, 19/F, Office Tower Shun Hing Square, Di Wang Commercial Centre, Room 1001, West Wing, Tsim Sha Tsui Centre, 66 103 8F, No.87, Zhengzhou Rd., Taipei 5002 Shen Nan Dong Road, Shenzhen City, Guangdong Province, 518008 Mody Road, Tsim Sha Tsui East, Kowloon, Hong Kong Phone : +886-2-2555-7377 Phone : +86-755-8207-0851 Phone : +852-2803-5338 Fax : +886-2-2555-7355 Fax : +86-755-8207-0873 Fax : +852-2591-6560 http://www.hirose.com/tw/ http://www.hirose.com/cn/ http://www.hirose.com/hk/ KOREA: SINGAPORE: INDIA: HIROSE KOREA CO.,LTD. HIROSE ELECTRIC SINGAPORE PTE. LTD. HIROSE ELECTRIC SINGAPORE PTE. LTD. DELHI LIAISON OFFICE 143, Gongdan 1-daero, Siheung-si, 03, Anson Road, #20-01, Springleaf Tower, Office NO.552, Regus-Green Boulevard, Level5, Tower C, Gyeonggi-do, 15084, Korea Singapore 079909 Sec62, Plot B-9A, Block B, Noida, 201301, Uttar Pradesh, India Phone : +82-31-496-7000 Phone : +65-6324-6113 Phone : +91-12-660-8018 Fax : +82-31-496-7100 Fax : +65-6324-6123 Fax : +91-120-4804949 http://www.hirose.co.kr/ http://www.hirose.com/sg/ http://www.hirose.com/sg/ INDIA: MALAYSIA: THAILAND: HIROSE ELECTRIC SINGAPORE PTE. LTD. BANGALORE LIAISON OFFICE PENANG REPRESENTATIVE OFFICE BANGKOK OFFICE (REPRESENTATIVE OFFICE) Unit No-403, 4th Floor, No-84, Barton Centre, Mahatma 73-3-1, Ideal@The One, Jalan Mahsuri, Bayan Unit 4703, 47th FL., 1 Empire Tower, South Sathorn Gandhi (MG) Road, Bangalore 560 001, Karnataka, India Lepas Penang, 11950, Malaysia Road, Yannawa, Sathorn, Bangkok 10120 Thailand Phone : +91-80-4120 1907 Phone : +604-648-5536 Phone : +66-2-686-1255 Fax : +91-80-4120 9908 http://www.hirose.com/sg/ Fax : +66-2-686-3433 http://www.hirose.com/sg/ http://www.hirose.com/sg/ ® 2-6-3,Nakagawa Chuoh,Tsuzuki-Ku,Yokohama-Shi 224-8540,JAPAN TEL: +81-45-620-3526 Fax: +81-45-591-3726 http://www.hirose.com http://www.hirose-connectors.com The characteristics and the specifications contained herein are for reference purpose. Please refer to the latest customer drawings prior to use. 20 The contents of this catalog are current as of date of 10/2020. Contents are subject to change without notice for the purpose of improvements.