TSV630, TSV630A, TSV631, TSV631A Rail-to-rail input/output, 60 µA, 880 kHz, 5 V CMOS operational amplifiers Datasheet - production data Applications Battery-powered applications Portable devices Active filtering Medical instrumentation Description The TSV630 and TSV631 devices are single operational amplifiers offering low voltage, low power operation, and rail-to-rail input and output. These devices have a very low input bias current and a low offset voltage making them ideal for applications that require precision. They can operate at power supplies ranging from 1.5 V to 5.5 V, and are therefore very suitable for battery- powered devices, extending battery life. These op-amps feature an excellent speed/power consumption ratio, offering an 880 kHz gain bandwidth while consuming only 60 µA at a 5 V Features supply voltage. They are unity gain stable for capacitive loads up to 100 pF. Low offset voltage: 500 µV max (A version) Low power consumption: 60 µA typ at 5 V The devices are internally adjusted to provide Low supply voltage: 1.5 V - 5.5 V very narrow dispersion of AC and DC parameters. The TSV630 provides a shutdown Gain bandwidth product: 880 kHz typ function. All devices are offered in Unity gain stability micropackages and are guaranteed for industrial Low power shutdown mode: 5 nA typ temperature ranges from -40 ° C to 125 ° C. High output current: 63 mA at V = 5 V CC Low input bias current: 1 pA typ These features combined make the TSV630 and Rail-to-rail input and output TSV631 ideal for sensor interfaces, battery- Extended temperature range: -40 °C to supplied and portable applications, as well as 125 °C active filtering. Automotive qualification Related products See the TSV521 series for higher merit factor (1.15 MHz for 45 µA) See the TSV611 (120 kHz for 9 µA) or the TSV621 (420 kHz for 29 µA) for more power savings September 2016 DocID15242 Rev 8 1/29 This is information on a product in full production. www.st.com

Contents TSV630, TSV630A, TSV631, TSV631A Contents 1 Package pin connections ................................................................ 3 2 Absolute maximum ratings and operating conditions ................. 4 3 Electrical characteristics ................................................................ 5 4 Application information ................................................................ 13 4.1 Operating voltages .......................................................................... 13 4.2 Rail-to-rail input ............................................................................... 13 4.3 Rail-to-rail output ............................................................................. 13 4.4 Shutdown function (TSV630) .......................................................... 14 4.5 Optimization of DC and AC parameters .......................................... 15 4.6 Driving resistive and capacitive loads ............................................. 15 4.7 PCB layouts .................................................................................... 15 4.8 Macromodel .................................................................................... 16 5 Package information ..................................................................... 17 5.1 DFN6 1.2x1.3 package information ................................................. 18 5.2 DFN8 2x2 package information ....................................................... 20 5.3 SC70-6 (or SOT323-6) package information ................................... 22 5.4 SOT23-6 package information ........................................................ 24 5.5 SC70-5 (or SOT323-5) package information ................................... 25 5.6 SOT23-5 package information ........................................................ 26 6 Ordering information ..................................................................... 27 7 Revision history ............................................................................ 28 2/29 DocID15242 Rev 8

TSV630, TSV630A, TSV631, TSV631A Package pin connections 1 Package pin connections Figure 1: Pin connections for each package (top view) 1. The exposed pad of the DFN8 2x2 can be connected to VCC- or left floating. DocID15242 Rev 8 3/29

Absolute maximum ratings and operating TSV630, TSV630A, TSV631, TSV631A conditions 2 Absolute maximum ratings and operating conditions Table 1: Absolute maximum ratings (AMR) Symbol Parameter Value Unit VCC Supply voltage (1) 6 Vid Differential input voltage (2) ±VCC V Vin Input voltage (3) (VCC-) - 0.2 to (VCC+) + 0.2 Iin Input current (4) 10 mA SHDN Shutdown voltage (3) 6 V Tstg Storage temperature -65 to 150 °C DFN6 1.2x1.3 232 DFN8 2x2 57 SC70-6 232 Thermal resistance junction-to- Rthja (5) (6) ambient °C/W SOT23-6 240 SC70-5 205 SOT23-5 250 Tj Maximum junction temperature 150 °C HBM: human body model (7) 4 kV ESD MM: machine model (8) 300 V CDM: charged device model (9) 1.5 kV Latch-up immunity 200 mA Notes: (1)All voltage values, except the differential voltage are with respect to the network ground terminal. (2)The differential voltage is the non-inverting input terminal with respect to the inverting input terminal. (3)VCC - Vin must not exceed 6 V (4)Input current must be limited by a resistor in series with the inputs. (5)Rth are typical values. (6)Short-circuits can cause excessive heating and destructive dissipation. (7)100 pF discharged through a 1.5 kΩ resistor between two pins of the device, done for all couples of pin combinations with other pins floating (8)A 200 pF capacitor is charged to the specified voltage, then discharged directly between two pins of the device with no external series resistor (internal resistor < 5 Ω), done for all couples of pin combinations with other pins floating (9)All pins plus package are charged together to the specified voltage and then discharged directly to the ground Table 2: Operating conditions Symbol Parameter Value Unit VCC Supply voltage 1.5 to 5.5 V Vicm Common mode input voltage range (VCC-) - 0.1 to (VCC+) + 0.1 Toper Operating free air temperature range -40 to 125 °C 4/29 DocID15242 Rev 8

TSV630, TSV630A, TSV631, TSV631A Electrical characteristics 3 Electrical characteristics Table 3: Electrical characteristics at VCC+ = 1.8 V with VCC- = 0 V, Vicm = VCC/2, Tamb = 25 ° C and RL connected to VCC/2 (unless otherwise specified) Symbol Parameter Conditions Min. Typ. Max. Unit DC performance TSV630, TSV631 3 TSV630A, TSV631A 0.5 Vio Offset voltage -40 °C < Top < 125 °C, 4.5 mV TSV630, TSV631 -40 °C < Top < 125 °C, 2 TSV630A, TSV631A ΔVio/ΔT Input offset voltage drift 2 μV/°C Input offset current, 1 10 (1) Iio Vout = VCC/2 -40 °C < Top < 125 °C 1 100 pA Input bias current, 1 10 (1) Iib Vout = VCC/2 -40 °C < Top < 125 °C 1 100 Common mode rejection 0 V to 1.8 V, Vout = 0.9 V 53 74 CMR ratio 20 log, ΔVic/ΔVio -40 °C < Top < 125 °C 51 dB RL= 10 kΩ, Vout = 0.5 V to 1.3 V 85 95 Avd Large signal voltage gain -40 °C < Top < 125 °C 80 High level output voltage, RL = 10 kΩ 5 35 VOH VOH = VCC - Vout -40 °C < Top < 125 °C 50 mV RL = 10 kΩ 4 35 VOL Low level output voltage -40 °C < Top < 125 °C 50 Vο = 1.8 V 6 12 Isink -40 °C < Top < 125 °C 4 Iout mA Vο = 0 V 6 10 Isource -40 °C < Top < 125 °C 4 Supply current, No load, Vout = VCC/2 40 50 60 ICC SHDN = VCC+ -40 °C < Top < 125 °C 62 µA AC performance GBP Gain bandwidth product RL = 2 kΩ, CL = 100 pF, f = 100 kHz 700 790 kHz ɸm Phase margin 48 Degrees RL = 2 kΩ, CL = 100 pF Gm Gain margin 11 dB SR Slew rate RL = 2 kΩ, CL = 100 pF, Av = 1 0.2 0.27 V/μs Equivalent input noise f = 1 kHz 67 en voltage f = 10 kHz 53 nV/√Hz Notes: (1)Guaranteed by design. DocID15242 Rev 8 5/29

Electrical characteristics TSV630, TSV630A, TSV631, TSV631A Table 4: Shutdown characteristics VCC = 1.8 V Symbol Parameter Conditions Min. Typ. Max. Unit DC performance SHDN = VCC- 2.5 50 Supply current in shutdown nΑ ICC mode (all operators) -40 °C < Top < 85 °C 200 -40 °C < Top < 125 °C 1.5 µA ton Amplifier turn-on time RtoL (=V C2C k+)Ω -, 0V.2o uVt = (VCC-) + 0.2 V 300 ns toff Amplifier turn-off time RtoL (=V C2C k+)Ω -, 0V.2o uVt = (VCC-) + 0.2 V 20 VIH SHDN logic high 1.3 V VIL SHDN logic low 0.5 IIH SHDN current high SHDN = VCC+ 10 IIL SHDN current low SHDN = VCC- 10 pA Output leakage in shutdown SHDN = VCC- 50 IOLeak mode -40 °C < Top < 125 °C 1 nA 6/29 DocID15242 Rev 8

TSV630, TSV630A, TSV631, TSV631A Electrical characteristics Table 5: Electrical characteristics at VCC+ = 3.3 V, VCC- = 0 V, Vicm = VCC/2, Tamb = 25 ° C, RL connected to VCC/2 (unless otherwise specified) Symbol Parameter Conditions Min. Typ. Max. Unit DC performance TSV630, TSV631 3 TSV630A, TSV631A 0.5 Vio Offset voltage -40 °C < Top < 125 °C, 4.5 mV TSV630, TSV631 -40 °C < Top < 125 °C, 2 TSV630A, TSV631A ΔVio/ΔT Input offset voltage drift 2 μV/°C 1 10 (1) Iio Input offset current -40 °C < Top < 125 °C 1 100 pA 1 10 (1) Iib Input bias current -40 °C < Top < 125 °C 1 100 Common mode rejection 0 V to 3.3 V, Vout = 1.75 V 57 79 CMR ratio 20 log, ΔVic/ΔVio -40 °C < Top < 125 °C 53 dB RL = 10 kΩ, Vout = 0.5 V to 2.8 V 88 98 Avd Large signal voltage gain -40 °C < Top < 125 °C 83 High level output voltage, RL = 10 kΩ 6 35 VOH VOH = VCC - Vout -40 °C < Top < 125 °C 50 mV RL = 10 kΩ 7 35 VOL Low level output voltage -40 °C < Top < 125 °C 50 Vο = 3.3 V 30 45 Isink -40 °C < Top < 125 °C 25 42 Iout mA Vο = 0 V 30 38 Isource -40 °C < Top < 125 °C 25 Supply current, No load, Vout = 1.75 V 43 55 64 ICC SHDN = VCC+ -40 °C < Top < 125 °C 66 µA AC performance GBP Gain bandwidth product RL = 2 kΩ, CL = 100 pF, 710 860 kHz f = 100 kHz ɸm Phase margin 50 Degrees RL = 2 kΩ, CL = 100 pF Gm Gain margin 11 dB SR Slew rate RL = 2 kΩ, CL = 100 pF, Av = 1 0.22 0.29 V/μs Equivalent input noise f = 1 kHz 64 en voltage f = 10 kHz 51 nV/√Hz Notes: (1)Guaranteed by design. DocID15242 Rev 8 7/29

Electrical characteristics TSV630, TSV630A, TSV631, TSV631A Table 6: Electrical characteristics at VCC+ = 5 V with VCC- = 0 V, Vicm = VCC/2, Tamb = 25° C and RL connected to VCC/2 (unless otherwise specified) Symbol Parameter Conditions Min. Typ. Max. Unit DC performance TSV630, TSV631 3 TSV630A, TSV631A 0.5 Vio Offset voltage -40 °C < Top < 125 °C, 4.5 mV TSV630, TSV631 -40 °C < Top < 125 °C, 2 TSV630A, TSV631A ΔVio/ΔT Input offset voltage drift 2 μV/°C Input offset current, 1 10 (1) Iio Vout = VCC/2 -40 °C < Top < 125 °C 1 100 pA Input bias current, 1 10 (1) Iib Vout = VCC/2 -40 °C < Top < 125 °C 1 100 Common mode rejection ratio 0 V to 5 V, Vout = 2.5 V 60 80 CMR 20 log, ΔVic/ΔVio -40 °C < Top < 125 °C 55 Supply voltage rejection ratio VCC = 1.8 to 5 V 75 102 SVR dB 20 log, ΔVCC/ΔVio -40 °C < Top < 125 °C RL= 10 kΩ, Vout = 0.5 V to 4.5 V 89 98 Avd Large signal voltage gain -40 °C < Top < 125 °C 84 High level output voltage, RL = 10 kΩ 7 35 VOH VOH = VCC - Vout -40 °C < Top < 125 °C 50 mV RL = 10 kΩ 6 35 VOL Low level output voltage -40 °C < Top < 125 °C 50 Vο = 5 V 40 69 Isink -40 °C < Top < 125 °C 35 65 Iout mA Vο = 0 V 40 74 Isource -40 °C < Top < 125 °C 36 68 Supply current No load, Vout = VCC/2 50 60 69 ICC µA SHDN = VCC+ -40 °C < Top < 125 °C 72 AC performance GBP Gain bandwidth product RL = 2 kΩ, CL= 100 pF, 730 880 f = 100 kHz kHz F u Unity gain frequency 830 ɸm Phase margin RL = 2 kΩ, CL = 100 pF, 50 Degrees Gm Gain margin 12 dB SR Slew rate RL = 2 kΩ, CL = 100 pF, Av = 1 0.25 0.34 V/μs Equivalent input noise f = 1 kHz 60 en voltage f = 10 kHz 47 nV/√Hz 8/29 DocID15242 Rev 8

TSV630, TSV630A, TSV631, TSV631A Electrical characteristics Symbol Parameter Conditions Min. Typ. Max. Unit THD+en Total harmonic distortion fV =ic m1 = k HVzC,C /A2V, V= o1u, tR =L 2= V1P0P0 kΩ, 0.0017 % Notes: (1)Guaranteed by design. Table 7: Shutdown characteristics VCC = 5 V Symbol Parameter Conditions Min. Typ. Max. Unit DC performance SHDN = VCC- 5 50 Supply current in shutdown nΑ ICC mode (all operators) -40 °C < Top < 85 °C 200 -40 °C < Top < 125 °C 1.5 µA ton Amplifier turn-on time RtoL (=V C2C k+)Ω -, 0V.2o uVt = (VCC-) + 0.2 V 300 ns toff Amplifier turn-off time RtoL (=V C2C k+)Ω -, 0V.2o uVt = (VCC-) + 0.2 V 30 VIH SHDN logic high 4.5 V VIL SHDN logic low 0.5 IIH SHDN current high SHDN = VCC+ 10 IIL SHDN current low SHDN = VCC- 10 pA Output leakage in shutdown SHDN = VCC- 50 IOLeak mode -40 °C < Top < 125 °C 1 nA DocID15242 Rev 8 9/29

Electrical characteristics TSV630, TSV630A, TSV631, TSV631A Figure 2: Supply current vs. supply voltage at Figure 3: In-series resistor (Riso) vs. capacitive load Vicm = VCC/2 Ω) or st si e r s e eri s n- I Figure 4: Output current vs. output voltage at VCC = 5 V Figure 5: Voltage gain and phase vs. frequency at VCC = 1.5 V Figure 6: Voltage gain and phase vs. frequency at Figure 7: Phase margin vs. output current at VCC = 5 V VCC = 5 V 90 80 Cl=100pF 70 60 50 40 Cl=330pF 30 20 Vcc=5V,Vicm=2.5V 10 Rl=2kohms,T=25ºC 0 -1.5 -1.0 -0.5 0.0 0.5 1.0 1.5 10/29 DocID15242 Rev 8

TSV630, TSV630A, TSV631, TSV631A Electrical characteristics Figure 8: Positive slew rate vs. time Figure 9: Negative slew rate vs. time V) ( e g a olt v ut p ut O Time(µs) Time(µs) Figure 10: Positive slew rate vs. supply voltage Figure 11: Negative slew rate vs. supply voltage 00..55 00..00 00..44 --00..11 00..33 --00..22 00..22 --00..33 00..11 --00..44 00..00 --00..55 22..55 33..00 33..55 44..00 44..55 55..00 55..55 22..55 33..00 33..55 44..00 44..55 55..00 55..55 Supply voltage (V) Supply voltage (V) Figure 12: Distortion + noise vs. output voltage Figure 13: Distortion + noise vs. output voltage (RL = 2 kΩ) (RL = 100 kΩ) Vcc=1.8V f=1kHz,Av=1 Vcc=3.3V f=1kHz,Av=1 Rl=2kOhmsto Vcc/2 RI=100kOhmsto Vcc/2 Vicm=(Vcc-0.7)/2 Vicm=(Vcc-0.7)/2 BW=22kHz BW=22kHz %) (%) ( Vcc=1.5V N N + + D D H H T T Vcc=1.5V Vcc=5V Vcc=5.5V OutputVoltage(Vpp) OutputVoltage(Vpp) DocID15242 Rev 8 11/29

Electrical characteristics TSV630, TSV630A, TSV631, TSV631A Figure 14: Distortion + noise vs. frequency and input Figure 15: Distortion + noise vs. frequency and output voltage load resistor Ω Ω Ω Ω Figure 16: Noise vs. frequency Hz) 1000 V V/ n Vcc=5V y ( T=25°C sit n e d e s oi Vicm=2.5V n e 100 g a olt v nt ale Vicm=4.5V v ui q e ut p 10 n I 0.01 0.1 1 10 100 Frequency (kHz) 12/29 DocID15242 Rev 8

TSV630, TSV630A, TSV631, TSV631A Application information 4 Application information 4.1 Operating voltages The TSV630 and TSV631 can operate from 1.5 V to 5.5 V. Their parameters are fully specified for 1.8-V, 3.3-V, and 5-V power supplies. However, the parameters are very stable in the full V range and several characterization curves show the TSV63x CC characteristics at 1.5 V. In addition, the main specifications are guaranteed in extended temperature ranges from -40 °C to 125 °C. 4.2 Rail-to-rail input The TSV630 and TSV631 are built with two complementary PMOS and NMOS input differential pairs. The devices have a rail-to-rail input, and the input common mode range is extended from (V ) - 0.1 V to (V ) + 0.1 V. The transition between the two pairs appears CC- CC+ at (V ) - 0.7 V. In the transition region, the performance of CMRR, PSRR, V and THD is CC+ io slightly degraded (as shown in Figure 17 and Figure 18 for V vs. V ). io icm Figure 17: Input offset voltage vs input common mode at Figure 18: Input offset voltage vs input common mode at VCC = 1.5 V VCC = 5 V The device is guaranteed without phase reversal. 4.3 Rail-to-rail output The operational amplifiers’ output levels can go close to the rails: to a maximum of 35 mV above and below the rail when a 10 kΩ resistive load is connected to V /2. CC DocID15242 Rev 8 13/29

Application information TSV630, TSV630A, TSV631, TSV631A 4.4 Shutdown function (TSV630) The operational amplifier is enabled when the SHDN pin is pulled high. To disable the amplifier, the SHDN must be pulled down to V . When in shutdown mode, the amplifier CC- output is in a high impedance state. The SHDN pin must never be left floating, but must be tied to V or V . CC+ CC- The turn-on and turn-off time are calculated for an output variation of ±200 mV (Figure 19 and Figure 20 show the test configurations). Figure 21 and Figure 22 show the amplifier output voltage behavior when the SHDN pin is toggled high and low. Figure 19: Test configuration for turn-on time Figure 20: Test configuration for turn-off time (Vout pulled down) (Vout pulled down) +2.5 V +2.5 V GND GND 2 kΩ 2 kΩ 2 V + 2 V + DUT DUT - - -2.5 V -2.5 V Figure 21: Turn-on time, VCC = ±2.5 V, Figure 22: Turn-off time, VCC = ±2.5 V, Vout pulled down, T = 25 °C Vout pulled down, T = 25 °C 14/29 DocID15242 Rev 8

TSV630, TSV630A, TSV631, TSV631A Application information 4.5 Optimization of DC and AC parameters These devices use an innovative approach to reduce the spread of the main DC and AC parameters. An internal adjustment achieves a very narrow spread of the current consumption (60 µA typical, min/max at ±17 %). Parameters linked to the current consumption value, such as GBP, SR and AVd, benefit from this narrow dispersion. All parts present a similar speed and the same behavior in terms of stability. In addition, the minimum values of GBP and SR are guaranteed (GBP = 730 kHz minimum and SR = 0.25 V/µs minimum). 4.6 Driving resistive and capacitive loads These products are micro-power, low-voltage operational amplifiers optimized to drive rather large resistive loads, above 2 kΩ. For lower resistive loads, the THD level may significantly increase. In a follower configuration, these operational amplifiers can drive capacitive loads up to 100 pF with no oscillations. When driving larger capacitive loads, adding an in-series resistor at the output can improve the stability of the devices (see Figure 23 for recommended in-series resistor values). Once the in-series resistor value has been selected, the stability of the circuit should be tested on the bench and simulated with the simulation model. Figure 23: In-series resistor vs. capacitive load Ω 4.7 PCB layouts For correct operation, it is advised to add 10 nF decoupling capacitors as close as possible to the power supply pins. DocID15242 Rev 8 15/29

Application information TSV630, TSV630A, TSV631, TSV631A 4.8 Macromodel An accurate macromodel of the TSV630 and TSV631 is available on STMicroelectronics’ web site at www.st.com. This model is a trade-off between accuracy and complexity (that is, time simulation) of the TSV63x operational amplifiers. It emulates the nominal performances of a typical device within the specified operating conditions mentioned in the datasheet. It also helps to validate a design approach and to select the right operational amplifier, but it does not replace on-board measurements. 16/29 DocID15242 Rev 8

TSV630, TSV630A, TSV631, TSV631A Package information 5 Package information In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK® packages, depending on their level of environmental compliance. ECOPACK® specifications, grade definitions and product status are available at: www.st.com. ECOPACK® is an ST trademark. DocID15242 Rev 8 17/29

Package information TSV630, TSV630A, TSV631, TSV631A 5.1 DFN6 1.2x1.3 package information Figure 24: DFN6 1.2x1.3 package outline BOTTOMVIEW e b PIN#1ID L3 L SIDEVIEW A1 C A SEATING PLANE 8 0.05 C TOPVIEW D E PIN1 18/29 DocID15242 Rev 8

TSV630, TSV630A, TSV631, TSV631A Package information Table 8: DFN6 1.2x1.3 mechanical data Dimensions Ref Millimeters Inches Min. Typ. Max. Min. Typ. Max. A 0.31 0.38 0.40 0.012 0.015 0.016 A1 0.00 0.02 0.05 0.000 0.001 0.002 b 0.15 0.18 0.25 0.006 0.007 0.010 c 0.05 0.002 D 1.20 0.047 E 1.30 0.051 e 0.40 0.016 L 0.475 0.525 0.575 0.019 0.021 0.023 L3 0.375 0.425 0.475 0.015 0.017 0.019 Figure 25: DFN6 1.2x1.3 recommended footprint 0.40 0.25 3 1 1.20 0.475 4 6 DocID15242 Rev 8 19/29

Package information TSV630, TSV630A, TSV631, TSV631A 5.2 DFN8 2x2 package information Figure 26: DFN8 2x2 package outline Table 9: DFN8 2x2 mechanical data Dimensions Ref. Millimeters Inches Min. Typ. Max. Min. Typ. Max. A 0.51 0.55 0.60 0.020 0.022 0.024 A1 0.05 0.002 A3 0.15 0.006 b 0.18 0.25 0.30 0.007 0.010 0.012 D 1.85 2.00 2.15 0.073 0.079 0.085 D2 1.45 1.60 1.70 0.057 0.063 0.067 E 1.85 2.00 2.15 0.073 0.079 0.085 E2 0.75 0.90 1.00 0.030 0.035 0.039 e 0.50 0.020 L 0.425 0.017 ddd 0.08 0.003 20/29 DocID15242 Rev 8

TSV630, TSV630A, TSV631, TSV631A Package information Figure 27: DFN8 2x2 recommended footprint DocID15242 Rev 8 21/29

Package information TSV630, TSV630A, TSV631, TSV631A 5.3 SC70-6 (or SOT323-6) package information Figure 28: SC70-6 (or SOT323-6) package outline Table 10: SC70-6 (or SOT323-6) mechanical data Dimensions Ref Millimeters Inches Min. Typ. Max. Min. Typ. Max. A 0.80 1.10 0.031 0.043 A1 0.10 0.004 A2 0.80 1.00 0.031 0.039 b 0.15 0.30 0.006 0.012 c 0.10 0.18 0.004 0.007 D 1.80 2.20 0.071 0.086 E 1.15 1.35 0.045 0.053 e 0.65 0.026 HE 1.80 2.40 0.071 0.094 L 0.10 0.40 0.004 0.016 Q1 0.10 0.40 0.004 0.016 22/29 DocID15242 Rev 8

TSV630, TSV630A, TSV631, TSV631A Package information Figure 29: SC70-6 (or SOT323-6) recommended footprint DocID15242 Rev 8 23/29

Package information TSV630, TSV630A, TSV631, TSV631A 5.4 SOT23-6 package information Figure 30: SOT23-6 package outline Table 11: SOT23-6 mechanical data Dimensions Ref. Millimeters Inches Min. Typ. Max. Min. Typ. Max. A 0.90 1.45 0.035 0.057 A1 0.10 0.004 A2 0.90 1.30 0.035 0.051 b 0.35 0.50 0.013 0.019 c 0.09 0.20 0.003 0.008 D 2.80 3.05 0.110 0.120 E 1.50 1.75 0.060 0.069 e 0.95 0.037 H 2.60 3.00 0.102 0.118 L 0.10 0.60 0.004 0.024 θ 0 ° 10 ° 0 ° 10 ° 24/29 DocID15242 Rev 8

TSV630, TSV630A, TSV631, TSV631A Package information 5.5 SC70-5 (or SOT323-5) package information Figure 31: SC70-5 (or SOT323-5) package outline SIDE VIEW DIMENSIONS IN MM GAUGE PLANE COPLANAR LEADS SEATING PLANE TOP VIEW Table 12: SC70-5 (or SOT323-5) mechanical data Dimensions Ref. Millimeters Inches Min. Typ. Max. Min. Typ. Max. A 0.80 1.10 0.032 0.043 A1 0.10 0.004 A2 0.80 0.90 1.00 0.032 0.035 0.039 b 0.15 0.30 0.006 0.012 c 0.10 0.22 0.004 0.009 D 1.80 2.00 2.20 0.071 0.079 0.087 E 1.80 2.10 2.40 0.071 0.083 0.094 E1 1.15 1.25 1.35 0.045 0.049 0.053 e 0.65 0.025 e1 1.30 0.051 L 0.26 0.36 0.46 0.010 0.014 0.018 < 0° 8° 0° 8° DocID15242 Rev 8 25/29

Package information TSV630, TSV630A, TSV631, TSV631A 5.6 SOT23-5 package information Figure 32: SOT23-5 package outline Table 13: SOT23-5 mechanical data Dimensions Ref. Millimeters Inches Min. Typ. Max. Min. Typ. Max. A 0.90 1.20 1.45 0.035 0.047 0.057 A1 0.15 0.006 A2 0.90 1.05 1.30 0.035 0.041 0.051 B 0.35 0.40 0.50 0.014 0.016 0.020 C 0.09 0.15 0.20 0.004 0.006 0.008 D 2.80 2.90 3.00 0.110 0.114 0.118 D1 1.90 0.075 e 0.95 0.037 E 2.60 2.80 3.00 0.102 0.110 0.118 F 1.50 1.60 1.75 0.059 0.063 0.069 L 0.10 0.35 0.60 0.004 0.014 0.024 K 0 degrees 10 degrees 0 degrees 10 degrees 26/29 DocID15242 Rev 8

TSV630, TSV630A, TSV631, TSV631A Ordering information 6 Ordering information Table 14: Order codes Temperature Order code Package Packing Marking range TSV630IQ1T DFN6 1.2x1.3 (1) K4 TSV630IQ2T DFN8 2x2 K1A TSV630ILT SΟΤ23-6 K108 TSV630ICT SC70-6 K18 TSV631ILT SΟΤ23-5 K109 -40 °C to 125 °C TSV631ICT SC70-5 K19 Tape and reel TSV630AILT SΟΤ23-6 K141 TSV630AICT SC70-6 K41 TSV631AILT SΟΤ23-5 K142 TSV631AICT SC70-5 K42 -40 °C to 125 °C TSV631IYLT (2) SΟΤ23-5 K10C automotive grade Notes: (1)Package available on request. Please contact your local sales office for further information. (2)Qualified and characterized according to AEC Q100 and Q003 or equivalent, advanced screening according to AEC Q001 and Q002 or equivalent. DocID15242 Rev 8 27/29

Revision history TSV630, TSV630A, TSV631, TSV631A 7 Revision history Table 15: Document revision history Date Revision Changes 19-Dec-2008 1 Initial release. Added root part numbers TSV630A and TSV631A on 17-Aug-2009 2 cover page. Corrected the “Equivalent input noise voltage” values 13-Aug-2012 3 in Table 3, Table 4, and Table 6. Updated Figure 16: "Noise vs. frequency". Features: added “automotive qualification” Added Related products Description: updated 22-Mar-2013 4 Updated titles of Figure 14 and Figure 15 Updated Section 4.4: "Shutdown function (TSV630)" Updated Table 13: "Order codes" Added DFN6 1.2 x 1.3 package details Table 3, Table 5, and Table 6: replaced DVio with 02-Oct-2013 5 ΔVio/ΔT. Figure 3: updated title Updated disclaimer Related products: updated Table 3, Table 4, Table 5, Table 6, and Table 7: updated some of the “conditions”. 21-Nov-2014 6 Figure 25: "DFN6 1.2x1.3 recommended footprint": updated Table 12: "SOT23-5 mechanical data": updated some of the “inches” dimensions. 01-Jul-2015 7 Table 3, Table 5, and Table 6: VOH "min" values changed to "max" values. Added "on request" to DFN6 1.2x1.3 silhouette. Added DFN8 2x2 silhouette, pinout and package. Table 1: "Absolute maximum ratings (AMR)": updated thermal resistance junction-to-ambient parameter for 20-Sep-2016 8 DFN8 2x2 package. Table 14: "Order codes": added footnote concerning package availability to DFN6 1.2x1.3, added TSV630IQ2T. 28/29 DocID15242 Rev 8

TSV630, TSV630A, TSV631, TSV631A IMPORTANT NOTICE – PLEASE READ CAREFULLY STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, enhancements, modifications, and improvements to ST products and/or to this document at any time without notice. Purchasers should obtain the latest relevant information on ST products before placing orders. ST products are sold pursuant to ST’s terms and conditions of sale in place at the time of order acknowledgement. Purchasers are solely responsible for the choice, selection, and use of ST products and ST assumes no liability for application assistance or the design of Purchasers’ products. No license, express or implied, to any intellectual property right is granted by ST herein. Resale of ST products with provisions different from the information set forth herein shall void any warranty granted by ST for such product. ST and the ST logo are trademarks of ST. All other product or service names are the property of their respective owners. Information in this document supersedes and replaces information previously supplied in any prior versions of this document. © 2016 STMicroelectronics – All rights reserved DocID15242 Rev 8 29/29