TS9222, TS9224 HIgh precision high stability dual and quad operational amplifiers Datasheet - production data Applications TS9222 SO8/TSSOP8 • Signal conditioning • Automotive applications OOuutt11 11 88 VV CCCC++ • Headphone amplifiers IInn11-- 22 __ 77 OOuutt22 • Sound cards, multimedia systems IInn11++ 33 ++ __ 66 IInn22-- • Line and actuator drivers VV 44 ++ 55 IInn22++ • Servo amplifiers CCCC-- Description TS9224 SO14/TSSOP14 The TS9222 and TS9224 are rail-to-rail dual and quad operational amplifiers optimized for OOuutt11 11 1144 OOuutt44 precision, noise and stability, which make them suitable for a wide range of automotive and IInn11-- 22 __ __ 1133 IInn44-- industrial applications. IInn11++ 33 ++ ++ 1122 IInn44++ These devices deliver a high output current that VV 44 1111 VV allows low-load impedances to be driven. They CCCC++ CCCC-- are stable for capacitive loads up to 500 pF. IInn22++ 55 1100 IInn33++ ++ ++ __ __ IInn22-- 66 99 IInn33-- OOuutt22 77 88 OOuutt33 Features • High precision: Vio = 500 µV max • Able to drive capacitive loads up to 500 pF • Rail-to-rail input and output • Low noise: 9 nV/√ Hz • Low distortion • High output current: 80 mA • High speed: 4 MHz, 1.3 V/μs • Operates from 2.7 V to 12 V • ESD internal protection: 2 kV • Latch-up immunity • Automotive qualification May 2014 DocID15718 Rev 5 1/16 This is information on a product in full production. www.st.com

Contents TS9222, TS9224 Contents 1 Absolute maximum ratings and operating conditions . . . . . . . . . . . . . 3 2 Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 3 Package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 3.1 SO8 package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 3.2 TSSOP8 package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11 3.3 SO14 package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 3.4 TSSOP14 package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 4 Ordering information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 5 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 2/16 DocID15718 Rev 5

TS9222, TS9224 Absolute maximum ratings and operating conditions 1 Absolute maximum ratings and operating conditions Table 1. Absolute maximum ratings (AMR) Symbol Parameter Value Unit V Supply voltage(1) 14 CC V Differential input voltage(2) ±1 V id V Input voltage(3) V -0.3 to V +0.3 in CC- CC+ T Storage temperature -65 to +150 °C stg Thermal resistance junction to ambient(4) SO8 125 Rthja TSSOP8 120 °C/W SO14 66 TSSOP14 100 T Maximum junction temperature 150 °C j HBM: human body model(5) 2000 ESD MM: machine model(6) 120 V TS9222 CDM: charged device model(7) 1500 HBM: human body model(5) 3 kV MM: machine model(6) 100 V ESD TS9224 CDM: charged device model(7) SO14 1.5 kV TSSOP14 1 Output short circuit duration see note(8) Latch-up immunity 200 mA Soldering temperature (10 sec), unleaded version 260 °C 1. All voltage values, except differential voltage are with respect to network ground terminal. 2. Differential voltages are the non-inverting input terminal with respect to the inverting input terminal. If V > ±1 V, the maximum input current must not exceed ±1 mA. In this case (V > ±1 V), an input series id id resistor must be added to limit input current. 3. Do not exceed 14 V. 4. Short-circuits can cause excessive heating. Destructive dissipation can result from simultaneous short- circuits on all amplifiers. These values are typical. 5. Human body model: a 100 pF capacitor is charged to the specified voltage, then discharged through a 1.5kΩ resistor between two pins of the device. This is done for all couples of connected pin combinations while the other pins are floating. 6. Machine model: a 200 pF capacitor is charged to the specified voltage, then discharged directly between two pins of the device with no external series resistor (internal resistor < 5 Ω). This is done for all couples of connected pin combinations while the other pins are floating. 7. Charged device model: all pins and the package are charged together to the specified voltage and then discharged directly to the ground through only one pin. This is done for all pins. 8. There is no short-circuit protection inside the device: short-circuits from the output to V can cause CC excessive heating. The maximum output current is approximately 80mA, independent of the magnitude of V . Destructive dissipation can result from simultaneous short-circuits on all amplifiers. CC DocID15718 Rev 5 3/16 16

Absolute maximum ratings and operating conditions TS9222, TS9224 Table 2. Operating conditions Symbol Parameter Value Unit V Supply voltage 2.7 to 12 CC V V Common mode input voltage range V -0.2 to V +0.2 icm CC- CC+ T Operating free air temperature range -40 to +125 °C oper 4/16 DocID15718 Rev 5

TS9222, TS9224 Electrical characteristics 2 Electrical characteristics Table 3 . Electrical characteristics measured at V = +3 V, V = 0 V, V = V /2, CC+ CC- icm CC T = 25° C, and R connected to V /2 (unless otherwise specified) amb L CC Symbol Parameter Test conditions Min. Typ. Max. Unit 500 V Input offset voltage µV io T ≤ T ≤ T 900 min amb max ΔV /ΔT Input offset voltage drift 2 μV/°C io I Input offset current V = V /2, T ≤ T ≤ T 1 30 io out CC min amb max V = V /2 15 55 nA I Input bias current out CC ib T ≤ T ≤ T 90 min amb max V from 0 to 3 V 65 85 CMR Common mode rejection ratio icm T ≤ T ≤ T 60 min amb max dB V = 2.7 to 3.3 V 75 90 SVR Supply voltage rejection ratio CC T ≤ T ≤ T 70 min amb max R = 10 kΩ, V = 2 V 70 200 L out p-p Avd Large signal voltage gain RL = 600 Ω, Vout = 2 Vp-p 15 35 V/mV T ≤ T ≤ T 1.8 min amb max R = 10 kΩ, T ≤ T ≤ T 2.90 L min amb max V High level output voltage V OH R = 600 Ω, T ≤ T ≤ T 2.87 L min amb max R = 10 kΩ, T ≤ T ≤ T 50 L min amb max V Low level output voltage mV OL R = 600 Ω, T ≤ T ≤ T 100 L min amb max I Output short circuit current 50 80 o No load, Vout = V /2 0.9 1.2 mA I Supply current (per channel) CC CC T ≤ T ≤ T 1.3 min amb max GBP Gain bandwidth product 4 MHz SR Slew rate 0.7 1.3 V/μs R = 10 kΩ, C = 100 pF φm Phase margin at unit gain L L 60 Degrees G Gain margin 8.5 dB m Equivalent input noise nV e f = 1 kHz 9 ------------ n voltage Hz V = 2 V , f = 1 kHz, A = 1, THD Total harmonic distortion out p-p v 0.005 % R = 600 Ω L C Channel separation 120 dB s DocID15718 Rev 5 5/16 16

Electrical characteristics TS9222, TS9224 Table 4. Electrical characteristics measured at V = 5 V, V = 0 V, V = V /2, CC+ CC- icm CC T = 25° C, and R connected to V /2 (unless otherwise specified) amb L CC Symbol Parameter Test conditions Min. Typ. Max. Unit 500 V Input offset voltage µV io T ≤ T ≤ T 900 min amb max ΔV /ΔT Input offset voltage drift 2 μV/°C io I Input offset current V = V /2, T ≤ T ≤ T 1 30 io out CC min amb max V = V /2 15 55 nA I Input bias current out CC ib T ≤ T ≤ T 90 min amb max Common mode rejection V from 0 to 5 V 65 85 CMR icm ratio T ≤ T ≤ T 60 min amb max dB V = 4.5 to 5.5 V 75 90 SVR Supply voltage rejection ratio CC T ≤ T ≤ T 70 min amb max R = 10 kΩ, V = 2 V 70 200 L out p-p Avd Large signal voltage gain RL = 600 Ω, Vout = 2 Vp-p 24 35 V/mV T ≤ T ≤ T 3 min amb max R = 10 kΩ, T ≤ T ≤ T 4.9 L min amb max V High level output voltage V OH R = 600 Ω, T ≤ T ≤ T 4.85 L min amb max R = 10 kΩ, T ≤ T ≤ T 50 L min amb max V Low level output voltage mV OL R = 600 Ω, T ≤ T ≤ T 120 L min amb max I Output short circuit current 50 80 o No load, Vout = VCC/2 0.9 1.2 mA I Supply current (per channel) cc T ≤ T ≤ T 1.3 min amb max GBP Gain bandwidth product 4 MHz SR Slew rate 0.7 1.3 V/μs RL = 10 kΩ, CL = 100 pF φm Phase margin at unit gain 63 Degrees G Gain margin 9.5 dB m Equivalent input noise en voltage f = 1 kHz 9 ---n--H-V----z-- V = 2 V , f = 1 kHz, A = 1, THD Total harmonic distortion out p-p v 0.005 % R = 600 Ω L C Channel separation 120 dB s 6/16 DocID15718 Rev 5

TS9222, TS9224 Electrical characteristics Figure 1. Total supply current vs. supply Figure 2. Output short circuit current vs. output voltage voltage 100 80 mA) 60 Sink ( nt 40 Curre 20 Vcc=0/3V Circuit 0 ort- -20 utSh -40 p Out -60 Source -80 -100 0 0,5 1 1,5 2 2,5 3 Output Voltage (V) Figure 3. Voltage gain and phase vs. frequency, Figure 4. Voltage gain and phase vs. frequency, C = 100 pF C = 500 pF L L 4400 120 50 180 3300 80 2200 40 40 1100 120 Gain (dB) −−110000 0 Phase (°) Gain(dB) 2300 CL=500pF Phase(Deg) −40 60 −−2200 10 Vcc=5V, Vicm=2.5V −80 −−3300 Cl=100pF, Rl=10kOhms, Vrl=Vcc/2 Tamb=25°C 0 0 −−4400 −120 1E+2 1E+3 1E+4 1E+5 1E+6 1E+7 1E+8 106 107 Frequency(Hz) Figure 5. Equivalent input noise voltage vs. Figure 6. THD + noise vs. frequency, frequency R = 2 kΩ, Vo = 10 Vpp L 30 0.02 25 nV/sqrt(Hz) 20 VRCLC==1±010.5ΩV %)0.015 EquivalentInputNoise( 11055 THD+Noise(0.00.0051 RLV=C2Ck=Ω± 6VVo =A1v0=V 1pp 0 0 0.01 0.1 1 10 100 0.01 0.1 1 10 100 Frequency(kHz) Frequency(kHz) DocID15718 Rev 5 7/16 16

Electrical characteristics TS9222, TS9224 Figure 7. THD + noise vs. frequency, Figure 8. THD + noise vs. frequency, R = 32 Ω, Vo = 4 Vpp R = 32 Ω, Vo = 2 Vpp L L 0.04 0.7 0.6 0.032 0.5 HD+Noise(%)00..001264 RVLC=C3=2±Ω2 . 5VVo =A4vV=p 1p HD+Noise(%) 00..34 VRCLC==3±21Ω. 5 VVo A=2vV=p 1p0 T T 0.2 0.008 0.1 0 0 0.01 0.1 1 10 100 0.01 0.1 1 10 100 Frequency(kHz) Frequency(kHz) Figure 9. THD + noise vs. output voltage, Figure 10. THD + noise vs. output voltage, R = 600 Ω, f = 1 kHz R = 32 Ω, f = 1 kHz L L 10,000 10 1,000 1 THD+Noise(%) 0,100 VRCLC==600/03ΩV f A=1vk=H -z1 THD+Noise(%) 0.1 VRCCL==±312.Ω5 V f = A1kvH= z-1 0,010 0.01 0,001 0 0.2 0.4 0.6 0.8 1 0 0,2 0,4 0,6 0,8 1 1,2 Vout(Vrms) Vout (Vrms) Figure 11. THD + noise vs. output voltage, R = 2 kΩ, f = 1 kHz L 10 1 %) THD+Noise( 0.1 VRCCL==±21k.Ω5 V f = A1kvH= z-1 0.01 0.001 0 0.2 0.4 0.6 0.8 1 1.2 Vout(Vrms) 8/16 DocID15718 Rev 5

TS9222, TS9224 Package information 3 Package information In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK® packages, depending on their level of environmental compliance. ECOPACK® specifications, grade definitions and product status are available at: www.st.com. ECOPACK® is an ST trademark. DocID15718 Rev 5 9/16 16

Package information TS9222, TS9224 3.1 SO8 package information Figure 12. SO8 package mechanical drawing Table 5. SO8 package mechanical data Dimensions Ref. Millimeters Inches Min. Typ. Max. Min. Typ. Max. A 1.75 0.069 A1 0.10 0.25 0.004 0.010 A2 1.25 0.049 b 0.28 0.48 0.011 0.019 c 0.17 0.23 0.007 0.010 D 4.80 4.90 5.00 0.189 0.193 0.197 E 5.80 6.00 6.20 0.228 0.236 0.244 E1 3.80 3.90 4.00 0.150 0.154 0.157 e 1.27 0.050 h 0.25 0.50 0.010 0.020 L 0.40 1.27 0.016 0.050 L1 1.04 0.040 k 0 8° 1° 8° ccc 0.10 0.004 10/16 DocID15718 Rev 5

TS9222, TS9224 Package information 3.2 TSSOP8 package information Figure 13. TSSOP8 package mechanical drawing Table 6. TSSOP8 package mechanical data Dimensions Ref. Millimeters Inches Min. Typ. Max. Min. Typ. Max. A 1.20 0.047 A1 0.05 0.15 0.002 0.006 A2 0.80 1.00 1.05 0.031 0.039 0.041 b 0.19 0.30 0.007 0.012 c 0.09 0.20 0.004 0.008 D 2.90 3.00 3.10 0.114 0.118 0.122 E 6.20 6.40 6.60 0.244 0.252 0.260 E1 4.30 4.40 4.50 0.169 0.173 0.177 e 0.65 0.0256 k 0° 8° 0° 8° L 0.45 0.60 0.75 0.018 0.024 0.030 L1 1 0.039 aaa 0.10 0.004 DocID15718 Rev 5 11/16 16

Package information TS9222, TS9224 3.3 SO14 package information Figure 14. SO14 package mechanical drawing Table 7. SO14 package mechanical data Dimensions Millimeters Inches Ref. Min. Typ. Max. Min. Typ. Max. A 1.35 1.75 0.05 0.068 A1 0.10 0.25 0.004 0.009 A2 1.10 1.65 0.04 0.06 B 0.33 0.51 0.01 0.02 C 0.19 0.25 0.007 0.009 D 8.55 8.75 0.33 0.34 E 3.80 4.0 0.15 0.15 e 1.27 0.05 H 5.80 6.20 0.22 0.24 h 0.25 0.50 0.009 0.02 L 0.40 1.27 0.015 0.05 k 8° (max.) ddd 0.10 0.004 12/16 DocID15718 Rev 5

TS9222, TS9224 Package information 3.4 TSSOP14 package information Figure 15. TSSOP14 package mechanical drawing Table 8. TSSOP14 package mechanical data Dimensions Ref. Millimeters Inches Min. Typ. Max. Min. Typ. Max. A 1.20 0.047 A1 0.05 0.15 0.002 0.004 0.006 A2 0.80 1.00 1.05 0.031 0.039 0.041 b 0.19 0.30 0.007 0.012 c 0.09 0.20 0.004 0.0089 D 4.90 5.00 5.10 0.193 0.197 0.201 E 6.20 6.40 6.60 0.244 0.252 0.260 E1 4.30 4.40 4.50 0.169 0.173 0.176 e 0.65 0.0256 L 0.45 0.60 0.75 0.018 0.024 0.030 L1 1.00 0.039 k 0° 8° 0° 8° aaa 0.10 0.004 DocID15718 Rev 5 13/16 16

Ordering information TS9222, TS9224 4 Ordering information Table 9. Order codes Temperature Order code Package Packaging Marking range TS9222ID Tube or SO8 TS9222IDT Tape and reel 9222 TS9222IPT TSSOP8 Tape and reel TS9224ID Tube or SO14 TS9224IDT Tape and reel 9224 TS9224IPT TSSOP14 TS9222IYDT(1) -40° C, +125° C SO8 (automotive grade) 9222Y TSSOP8 TS9222IYPT(1) (automotive grade) Tape and reel SO14 TS9224IYDT(1) (automotive grade) 9224Y TSSOP14 TS9224IYPT(1) (automotive grade) 1. Qualified and characterized according to AEC Q100 and Q003 or equivalent, advanced screening according to AEC Q001 & Q 002 or equivalent. 14/16 DocID15718 Rev 5

TS9222, TS9224 Revision history 5 Revision history Table 10. Document revision history Date Revision Changes 25-Sep-2009 1 Initial release. Added pinout of dual and quad versions on cover page. 18-Mar-2010 2 Corrected AVd parameter values in Table 3. and Table 4. 13-Apr-2011 3 Updated test conditions for CMR in Table 3. and Table 4. Added “automotive qualification” to Features Table 1: updated ESD values 31-May-2013 4 Table 3 and Table 4: updated DV with ΔV /ΔT, updated I io io CC parameter. Table 9: updated footnotes Table 3 and Table 4: added minimum slew rate (SR) values 23-May-2014 5 Updated disclaimer DocID15718 Rev 5 15/16 16

TS9222, TS9224 Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST’s terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. ST PRODUCTS ARE NOT DESIGNED OR AUTHORIZED FOR USE IN: (A) SAFETY CRITICAL APPLICATIONS SUCH AS LIFE SUPPORTING, ACTIVE IMPLANTED DEVICES OR SYSTEMS WITH PRODUCT FUNCTIONAL SAFETY REQUIREMENTS; (B) AERONAUTIC APPLICATIONS; (C) AUTOMOTIVE APPLICATIONS OR ENVIRONMENTS, AND/OR (D) AEROSPACE APPLICATIONS OR ENVIRONMENTS. WHERE ST PRODUCTS ARE NOT DESIGNED FOR SUCH USE, THE PURCHASER SHALL USE PRODUCTS AT PURCHASER’S SOLE RISK, EVEN IF ST HAS BEEN INFORMED IN WRITING OF SUCH USAGE, UNLESS A PRODUCT IS EXPRESSLY DESIGNATED BY ST AS BEING INTENDED FOR “AUTOMOTIVE, AUTOMOTIVE SAFETY OR MEDICAL” INDUSTRY DOMAINS ACCORDING TO ST PRODUCT DESIGN SPECIFICATIONS. PRODUCTS FORMALLY ESCC, QML OR JAN QUALIFIED ARE DEEMED SUITABLE FOR USE IN AEROSPACE BY THE CORRESPONDING GOVERNMENTAL AGENCY. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. © 2014 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan - Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com 16/16 DocID15718 Rev 5

Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: S TMicroelectronics: TS9222IPT TS9224IPT TS9222IDT TS9222ID TS9224IDT TS9224ID TS9222IYDT TS9224IYDT TS9222IYPT TS9224IYPT