TVS Diodes Surface Mount – 600W > TPSMB series TPSMB Series RoHS Pb e3 Description Uni-directional Bi-directional The TPSMB series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Features • High reliability application • Fast response time: and automotive grade AEC typically less than 1.0ns Q101 qualified from 0V to V min BR Agency Approvals • Surface mount component • Excellent clamping to optimize board space capability AGENCY AGENCY FILE NUMBER • Low profile package • Low incremental surge E230531 • Typical failure mode is resistance short from over-specified • Typical I ≤ 1µA for R voltage or current V >10.2V Maximum Ratings and Thermal Characteristics R • Whisker test is conducted • UL Recognized compound (T =25OC unless otherwise noted) A based on JEDEC meeting flammability JESD201A per its table 4a rating V-0 Parameter Symbol Value Unit and 4c • Meet MSL level1, Peak Pulse Power Dissipation by 10/1000µs waveform P 600 W • ESD protection of data per J-STD-020, High PPM (Fig.1)(Note 1), (Note 2) lines in accordance with temperature soldering Power Dissipation on infinite heat IEC 61000-4-2 guaranteed: 260°C/10 P 5.0 W sink at T=50OC M(AV) 30kV(Air), 30kV (Contact) seconds at terminals L Peak Forward Surge Current, 8.3ms • EFT protection of data • Matte tin lead–free plated I 100 A Single Half Sine Wave (Note 3) FSM lines in accordance with • Halogen free and RoHS Maximum Instantaneous Forward IEC 61000-4-4 compliant Voltage at 50A for Unidirectional VF 3.5 V • Glass passivated chip • Pb-free E3 means 2nd only (Note 4) junction level interconnect is Pb- Operating Junction Temperature T -65 to 175 • 600W PPPM (peak free and the terminal finish Range (V ≤ 91V) J BR pulse power) capability material is tin(Sn) (IPC/ Operating Junction Temperature T -65 to 150 °C at 10/1000μs waveform, JEDEC J-STD-609A.01) Range (V > 91V) J BR repetition rate (duty Storage Temperature Range T -65 to 175 cycles):0.01% STG Typical Thermal Resistance Junction R 20 °C/W to Lead θJL Typical Thermal Resistance Junction R 100 °C/W to Ambient θJA Notes: 1. Non-repetitive current pulse, per Fig.4 and derated above T=25ºC per Fig. 3. A 2. Mounted on copper pad area of 0.2x0.2” (5.0 x 5.0mm) to each terminal. 3. Measured on 8.3ms single half sine wave or equivalent square wave for unidirectional component only,duty cycle=4 per minute maximum. 4. VF < 3.5V for part number below 300A, VF < 5.0V for part number with 300A or above. Applications Functional Diagram TVS components are ideal for the protection of I/O Interfaces, V bus and other vulnerable circuits used in CC Automotive applications. Bi-directional Cathode Anode Uni-directional © 2018 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 09/05/18

TVS Diodes Surface Mount – 600W > TPSMB series Electrical Characteristics (T=25°C unless otherwise noted) A Typical Reverse Breakdown Test Maximum Maximum Maximum Maximum Agency Part Part Marking Stand off Voltage V Clamping Peak Reverse I @ BR Current Temperature Approval Nu(Umnbi)er Nu(mBib)er 15R0 °C VolVtage (Volts) @ IT IT Vol@ta g Ie V C CuPrruelsnet I Lea@ka Vge IR coefficient of UNI BI (μA) (VolRts) MIN MAX (mA) (V)pp (A) pp (µA)R VBR (%/C) TPSMB7.5A - 7V5AA - 500 6.40 7.13 7.88 10 11.3 54.0 500 0.052 X TPSMB8.2A - 8V2AA - 200 7.02 7.79 8.61 10 12.1 50.4 200 0.058 X TPSMB9.1A - 9V1AA - 50 7.78 8.65 9.55 1 13.4 45.5 50 0.063 X TPSMB10A TPSMB10CA 10AA 10CA 20 8.55 9.50 10.50 1 14.5 42.1 10 0.066 X TPSMB11A TPSMB11CA 11AA 11CA 8 9.40 10.50 11.60 1 15.6 39.1 5 0.069 X TPSMB12A TPSMB12CA 12AA 12CA 8 10.20 11.40 12.60 1 16.7 36.5 5 0.071 X TPSMB13A TPSMB13CA 13AA 13CA 8 11.10 12.40 13.70 1 18.2 33.5 1 0.074 X TPSMB15A TPSMB15CA 15AA 15CA 8 12.80 14.30 15.80 1 21.2 28.8 1 0.076 X TPSMB16A TPSMB16CA 16AA 16CA 8 13.60 15.20 16.80 1 22.5 27.1 1 0.080 X TPSMB18A TPSMB18CA 18AA 18CA 8 15.30 17.10 18.90 1 25.5 24.2 1 0.083 X TPSMB20A TPSMB20CA 20AA 20CA 8 17.10 19.00 21.00 1 27.7 22.0 1 0.085 X TPSMB22A TPSMB22CA 22AA 22CA 8 18.80 20.90 23.10 1 30.6 19.9 1 0.088 X TPSMB24A TPSMB24CA 24AA 24CA 8 20.50 22.80 25.20 1 33.2 18.4 1 0.091 X TPSMB27A TPSMB27CA 27AA 27CA 8 23.10 25.70 28.40 1 37.5 16.3 1 0.092 X TPSMB30A TPSMB30CA 30AA 30CA 8 25.60 28.50 31.50 1 41.4 14.7 1 0.093 X TPSMB33A TPSMB33CA 33AA 33CA 8 28.20 31.40 34.70 1 45.7 13.3 1 0.094 X TPSMB36A TPSMB36CA 36AA 36CA 8 30.80 34.20 37.80 1 49.9 12.2 1 0.096 X TPSMB39A TPSMB39CA 39AA 39CA 8 33.30 37.10 41.00 1 53.9 11.3 1 0.097 X TPSMB43A TPSMB43CA 43AA 43CA 8 36.80 40.90 45.20 1 59.3 10.3 1 0.098 X TPSMB47A TPSMB47CA 47AA 47CA 8 40.20 44.70 49.40 1 64.8 9.4 1 0.099 X TPSMB51A TPSMB51CA 51AA 51CA 8 43.60 48.50 53.60 1 70.1 8.7 1 0.100 X TPSMB56A TPSMB56CA 56AA 56CA 8 47.80 53.20 58.80 1 77.0 7.9 1 0.101 X TPSMB58A TPSMB58CA 58AA 58CA 8 52.78 55.10 60.90 1 79.8 7.7 1 0.101 - TPSMB62A TPSMB62CA 62AA 62CA 8 53.00 58.90 65.10 1 85.0 7.2 1 0.102 X TPSMB68A TPSMB68CA 68AA 68CA 8 58.10 64.60 71.40 1 92.0 6.6 1 0.103 X TPSMB75A TPSMB75CA 75AA 75CA 8 64.10 71.30 78.80 1 103.0 5.9 1 0.104 X TPSMB82A TPSMB82CA 82AA 82CA 8 70.10 77.90 86.10 1 113.0 5.4 1 0.105 X TPSMB91A TPSMB91CA 91AA 91CA 8 77.80 86.50 95.50 1 125.0 4.9 1 0.106 X TPSMB100A TPSMB100CA 100A 100C 8 85.50 95.00 105.00 1 137.0 4.5 1 0.106 X TPSMB110A TPSMB110CA 110A 110C 8 94.00 105.00 116.00 1 152.0 4.0 1 0.107 X TPSMB120A TPSMB120CA 120A 120C 8 102.00 114.00 126.00 1 165.0 3.7 1 0.107 X TPSMB130A TPSMB130CA 130A 130C 8 111.00 124.00 137.00 1 179.0 3.4 1 0.107 X TPSMB150A TPSMB150CA 150A 150C 8 128.00 143.00 158.00 1 207.0 2.9 1 0.108 X TPSMB160A TPSMB160CA 160A 160C 8 136.00 152.00 168.00 1 219.0 2.8 1 0.108 X TPSMB170A TPSMB170CA 170A 170C 8 145.00 162.00 179.00 1 234.0 2.6 1 0.108 X TPSMB180A TPSMB180CA 180A 180C 8 154.00 171.00 189.00 1 246.0 2.5 1 0.108 X TPSMB200A TPSMB200CA 200A 200C 8 171.00 190.00 210.00 1 274.0 2.2 1 0.108 X TPSMB210A TPSMB210CA 210A 210C 8 179.60 199.50 220.50 1 288.0 2.1 1 0.110 - TPSMB220A TPSMB220CA 220A 220C 8 185.00 209.00 231.00 1 328.0 1.9 1 0.110 X TPSMB250A TPSMB250CA 250A 250C 8 214.00 237.00 263.00 1 344.0 1.8 1 0.110 X TPSMB300A-A TPSMB300CA-A 300A 300C 8 256.00 285.00 315.00 1 414.0 1.5 1 0.110 X TPSMB350A-A TPSMB350CA-A 350A 350C 8 300.00 332.00 368.00 1 482.0 1.3 1 0.112 - TPSMB400A-A TPSMB400CA-A 400A 400C 8 342.00 380.00 420.00 1 548.0 1.1 1 0.112 - TPSMB440A-A TPSMB440CA-A 440A 440C 8 376.00 418.00 462.00 1 602.0 1.0 1 0.112 - TPSMB480A-A TPSMB480CA-A 480A 480C 8 408.00 456.00 504.00 1 658.0 0.9 1 0.112 - TPSMB510A-A TPSMB510CA-A 510A 510C 8 434.00 485.00 535.00 1 698.0 0.9 1 0.112 - TPSMB520A-A TPSMB520CA-A 520A 520C 8 443.00 494.50 545.50 1 718.0 0.9 1 0.112 - TPSMB530A-A TPSMB530CA-A 530A 530C 8 451.00 503.50 556.50 1 725.0 0.8 1 0.112 - TPSMB540A-A TPSMB540CA-A 540A 540C 8 460.00 513.00 567.00 1 740.0 0.8 1 0.112 - TPSMB550A-A TPSMB550CA-A 550A 550C 8 468.00 522.50 577.50 1 760.0 0.8 1 0.112 - - TPSMB600CA-A - 600C 8 511.00 570.00 630.00 1 828.0 0.8 1 0.112 - - TPSMB650CA-A - 650C 8 553.00 617.50 682.50 1 897.0 0.8 1 0.112 - Note: 1. For bidirectional type having V of 10 volts and less, the I limit is double. R R 2. V @T= V @25°C x (1+αT x (T - 25)) (αT:Temperature Coefficient). BR J BR J 3: The CTI (Comparative Tracking Index) of TPSMB600CA-A and TPSMB650CA-A is 600 and other parts is 550 © 2018 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 09/05/18

TVS Diodes Surface Mount – 600W > TPSMB series I-V Curve Characteristics I I Uni-directional Bi-directional Ipp IT Vc VBRVR IIRTVF V Vc VBRVR IR IIRT VRVBRVc V Ipp Ipp P Peak Pulse Power Dissipation -- Max power dissipation PPM V Stand-off Voltage -- Maximum voltage that can be applied to the TVS without operation R V Breakdown Voltage -- Maximum voltage that flows though the TVS at a specified test current (I) BR T V Clamping Voltage -- Peak voltage measured across the TVS at a specified Ippm (peak impulse current) C I Reverse Leakage Current -- Current measured at V R R V Forward Voltage Drop for Uni-directional F me VVVooollltttaaagggeee TTTrrraaannnsssiiieeennntttsss Ratings and Characteristic Curves (T=25°C unless otherwise noted) Ti A Figure 1 - TVS Transients Clamping Waveform FiguVVVreooolll ttt2aaaggg eee- AAAPcccerrroooasssksss TTT PVVVuSSSlse Power Rating Curve Voltage Transients VVoollttaaggVoltage Across TVSee ATcrraonsssi Current Through TVSeTnVtsSVoltage or CurrentVoltage or CurrentVoltage or Current wer (KW)CCCuuurrrrrreee1nnnttt10 TTT00hhhrrrooouuuggghhh TTTVVVSSS nt o or Curre Current Through TVS ulse P e P ag k 1 Volt Pea TTTiiimmmeee -M 0.31x0.31" (8.0x8.0mm) PPP 0.1 Copper Pad Area 0.001 0.01 0.1 1 10 t-Pulse Width (ms) tnerruC ro egatloV d Time © 2018 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 09/05/18

TVS Diodes Surface Mount – 600W > TPSMB series Ratings and Characteristic Curves (T=25°C unless otherwise noted) (Continued) A Figure 3 - Peak Pulse Power Derating Curve Figure 4 - Pulse Waveform 100 150 )Current (IPPge % 80 nt, % IRSM 100 tr=1PI0PeµPasMke cValue TPacusuJ r=ltrsh2eee5n W °tpC diodeitnchta( wytdsh) teiosr e5d 0teh%fien opefde IaPkP M e Power (P) or PPating in Percenta 4600 VBR>91V VBR≤91V eak Pulse Curre 50 HIPaPlMf Va(lI Pu P12e0M /1)000µsec. Waveform PulsDer 20 - PM as defined by R.E.A ak IPP e P td 0 0 0 25 50 75 100 125 150 175 200 0 1.0 2.0 3.0 4.0 T-Initial Junction Temperature (ºC) t-Time (ms) J Figure 5 - Typical Junction Capacitance Figure 6 - Maximum Non-Repetitive Peak Forward Surge Current Uni-Directional Only 10000 120 Bi-directional V=0V A) Uni-directional V=0V nt ( 100 e 1000 urr C e 80 g Cj (pF) 100 Uni-directional @VR ard Sur 60 w or F 40 k 10 Bi-directional @VR ea Tf=j=12.05MCHz - PM 20 Vsig=50mVp-p IFS 1 0 1 10 100 1000 1 10 100 V - Reverse Breakdown Voltage (V) BR Number of half-cycles at 60 Hz © 2018 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 09/05/18

TVS Diodes Surface Mount – 600W > TPSMB series Soldering Parameters Reflow Condition Lead–free assembly TP tp - Temperature Min (T ) 150°C s(min) Ramp-up Critical Zone Pre Heat - Temperature Max (Ts(max)) 200°C T) TL tL TL to TP - Time (min to max) (ts) 60 – 120 secs ure (Ts(max) Atov epreaagke ramp up rate (Liquidus Temp (TL) 3°C/second max TemperatTs(min) Prethseat Ramp-down T to T - Ramp-up Rate 3°C/second max S(max) L - Temperature (T) (Liquidus) 217°C Reflow L 25˚C t 25˚C to Peak - Time (min to max) (t) 60 – 150 seconds Time (t) s Peak Temperature (T) 260+0/-5 °C P Time within 5°C of actual peak 30 seconds max Temperature (t) p Environmental Specifications Ramp-down Rate 6°C/second max Time 25°C to peak Temperature (T) 8 minutes max. P Do not exceed 260°C High Temp. Storage JESD22-A103 Physical Specifications HTRB JESD22-A108 0.003 ounce, 0.093 grams Weight Temperature Cycling JESD22-A104 JEDEC DO214AA. Molded plastic body Case over glass passivated junction MSL JEDEC-J-STD-020, Level 1 Color band denotes cathode for Polarity unidirectional components. H3TRB JESD22-A101 Matte Tin-plated leads, Solderable per Terminal JESD22-B102 RSH JESD22-A111 Dimensions DO-214AA (SMB J-Bend) Inches Millimeters Dimensions Cathode Band for unidirectional components Min Max Min Max A 0.077 0.086 1.950 2.200 A C B 0.160 0.180 4.060 4.570 C 0.130 0.155 3.300 3.940 B D 0.084 0.096 2.130 2.440 E 0.030 0.060 0.760 1.520 H F - 0.008 - 0.203 D G 0.205 0.220 5.210 5.590 F H 0.006 0.012 0.152 0.305 E G I 0.089 - 2.260 - Dimension in inches and (millimeters) J 0.085 - 2.160 - J K L K - 0.107 - 2.740 L 0.085 - 2.160 - I Solder Pads © 2018 Littelfuse, Inc. Specifications are subject to change without notice. (all dimensions in mm) Revised: 09/05/18

TVS Diodes Surface Mount – 600W > TPSMB series Part Numbering System Part Marking System TPSMB XXXCA [-A] Cathode Band for unidirectional components F DESIGN CODE Littelfuse Logo 5% V VOLTAGE TOLERANCE BR BI-DIRECTIONAL XXXX Marking Code VBR VOLTAGE YMXXX SERIES Trace Code Marking Y:Year Code M: Month Code XXX: Lot Code Packaging Component Packaging Packaging Part number Quantity Package Option Specification TPSMBxxxXX DO-214AA 3000 Tape & Reel - 12mm tape/13” reel EIA STD RS-481 Tape and Reel Specification 0.157 (4.0) Cathode mark for 0.47 unidirectional components (12.0) 0.315 0.059 DIA Cover tape (8.0) (1.5) 13.0 (330) Dimensions are in inches 0.80 (20.2) (and millimeters). Arbor Hole Dia. Direction of Feed 0.49 (12.5) Disclaimer Notice - Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability of and test each product selected for their own applications. Littelfuse products are not designed for, and may not be used in, all applications. Read complete Disclaimer Notice at www.littelfuse.com/disclaimer-electronics. © 2018 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 09/05/18