TVS Diodes Surface Mount – 600W > TPSMA6L series TPSMA6L Series RoHS Pb e3 Uni-directional Description The TPSMA6L series is designed specifically to protect sensitive electronic equipment from voltage transients induced by load dump and other transient voltage events, and it’s especially suitable for high reliability and automotive application. SMA low profile package (DO221-AC) has the same electronical performance as the SMB package but with low height profiles (1.1mm). Agency Approvals Features AGENCY AGENCY FILE NUMBER • Same power as standard clamping capability E230531 SMB devices (600 W) • Fast response time: • Hi reliability application typically less than 1.0ns and automotive grade from 0 Volts to V min BR Maximum Ratings and Thermal Characteristics AEC Q101 qualified • Built-in strain relief (T =25OC unless otherwise noted) • SMA low profile package: • Glass passivated junction A less than 1.1 mm • High temperature Parameter Symbol Value Unit • Footprint compatibility soldering: 260°C/10 Peak Pulse Power Dissipation at T =25ºC by 10x1000µs Waveform P 600 W with standard SMA and seconds at terminals (FAig.2)(Note 1), (Note 2) PPM SMB products (easy to • Plastic package has layout) Power Dissipation on Infinite Heat underwriters laboratory P 3 W Sink at T =50OC M(AV) • Typical failure mode is flammability V-0 A short from over-specified Peak Forward Surge Current, 8.3ms • Typical maximum Single Half Sine Wave (Note 3) IFSM 60 A voltage or current temperature coefficient Maximum Instantaneous Forward • Whisker test is conducted ΔV = 0.1% x V @25°C x ΔT BR BR Voltage at 25A for Unidirectional V 3.5V V based on JEDEC F • Matte tin lead–free plated Only JESD201A per its table 4a • Halogen free and RoHS Operating Junction and Storage and 4c T, T -65 to 150 °C Temperature Range J STG compliant • IEC-61000-4-2 ESD Typical Thermal Resistance Junction 15kV(Air), 8kV (Contact) • Pb-free E3 means 2nd R 35 °C/W to Lead uJL level interconnect is • ESD protection of data Pb-free and the terminal Typical Thermal Resistance Junction lines in accordance with to Ambient RuJA 200 °C/W IEC 61000-4-2 finish material is tin(Sn) (IPC/JEDEC J-STD- • EFT protection of data Notes: 609A.01) lines in accordance with 1. Non-repetitive current pulse, per Fig.4 and derated above T=25ºC per Fig. 3. A IEC 61000-4-4 2. Mounted on 5.0x5.0mm copper pad to each terminal. 3. Measured on 8.3ms single half sine wave or equivalent square wave for unidirectional • Low inductance, excellent device only. Functional Diagram Applications Bi-directional TVS devices are ideal for the protection of I/O Interfaces, V bus and other vulnerable circuits used in Telecom, CC Computer, Industrial and Consumer electronic applications. Cathode Anode Uni-directional © 2016 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 09/10/16

TVS Diodes Surface Mount – 600W > TPSMA6L series Electrical Characteristics Breakdown Test Maximum Maximum Reverse Maximum Agency NuPmarbt e r Marking Stand off Voltage VBR Current VColaltmagpein Vg Peak Pulse LReaekvaegrsee I Approcal (Uni) Vo(lVtaogltes )VR (Volts) @ IT IT @ Ipp C Curr(eAn)t Ipp @ VR R MIN MAX (mA) (V) (µA) TPSMA6L5.0A AEA 5.0 6.40 7.00 10 9.2 65.3 800 X TPSMA6L6.0A AGA 6.0 6.67 7.37 10 10.3 58.3 800 X TPSMA6L6.5A AKA 6.5 7.22 7.98 10 11.2 53.6 500 X TPSMA6L7.0A AMA 7.0 7.78 8.60 10 12.0 50.0 200 X TPSMA6L7.5A APA 7.5 8.33 9.21 1 12.9 46.6 100 X TPSMA6L8.0A ARA 8.0 8.89 9.83 1 13.6 44.2 50 X TPSMA6L8.5A ATA 8.5 9.44 10.40 1 14.4 41.7 20 X TPSMA6L9.0A AVA 9.0 10.00 11.10 1 15.4 39.0 10 X TPSMA6L10A AXA 10.0 11.10 12.30 1 17.0 35.3 5 X TPSMA6L11A AZA 11.0 12.20 13.50 1 18.2 33.0 1 X TPSMA6L12A BEA 12.0 13.30 14.70 1 19.9 30.2 1 X TPSMA6L13A BGA 13.0 14.40 15.90 1 21.5 28.0 1 X TPSMA6L14A BKA 14.0 15.60 17.20 1 23.2 25.9 1 X TPSMA6L15A BMA 15.0 16.70 18.50 1 24.4 24.6 1 X TPSMA6L16A BPA 16.0 17.80 19.70 1 26.0 23.1 1 X TPSMA6L17A BRA 17.0 18.90 20.90 1 27.6 21.8 1 X TPSMA6L18A BTA 18.0 20.00 22.10 1 29.2 20.6 1 X TPSMA6L20A BVA 20.0 22.20 24.50 1 32.4 18.6 1 X TPSMA6L22A BXA 22.0 24.40 26.90 1 35.5 16.9 1 X TPSMA6L24A BZA 24.0 26.70 29.50 1 38.9 15.5 1 X TPSMA6L26A CEA 26.0 28.90 31.90 1 42.1 14.3 1 X TPSMA6L28A CGA 28.0 31.10 34.40 1 45.4 13.3 1 X TPSMA6L30A CKA 30.0 33.30 36.80 1 48.4 12.4 1 X TPSMA6L33A CMA 33.0 36.70 40.60 1 53.3 11.3 1 X TPSMA6L36A CPA 36.0 40.00 44.20 1 58.1 10.4 1 X TPSMA6L40A CRA 40.0 44.40 49.10 1 64.5 9.3 1 X TPSMA6L43A CTA 43.0 47.80 52.80 1 69.4 8.7 1 X TPSMA6L45A CVA 45.0 50.00 55.30 1 72.7 8.3 1 X TPSMA6L48A CXA 48.0 53.30 58.90 1 77.4 7.8 1 X TPSMA6L51A CZA 51.0 56.70 62.70 1 82.4 7.3 1 X TPSMA6L54A REA 54.0 60.00 66.30 1 87.1 6.9 1 X TPSMA6L58A RGA 58.0 64.40 71.20 1 93.6 6.5 1 X TPSMA6L60A RKA 60.0 66.70 73.70 1 96.8 6.2 1 X TPSMA6L64A RMA 64.0 71.10 78.60 1 103.0 5.9 1 X TPSMA6L70A RPA 70.0 77.80 86.00 1 113.0 5.3 1 X TPSMA6L75A RRA 75.0 83.30 92.10 1 121.0 5.0 1 X TPSMA6L78A RTA 78.0 86.70 95.80 1 126.0 4.8 1 X TPSMA6L85A RVA 85.0 94.40 104.00 1 137.0 4.4 1 X © 2016 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 09/10/16

TVS Diodes Surface Mount – 600W > TPSMA6L series I-V Curve Characteristics Uni-directional Vc VBRVR V IRVF IT Ipp P Peak Pulse Power Dissipation -- Max power dissipation PPM V Stand-off Voltage -- Maximum voltage that can be applied to the TVS without operation R V Breakdown Voltage -- Maximum voltage that flows though the TVS at a specified test current (I) BR T V Clamping Voltage -- Peak voltage measured across the suppressor at a specified Ippm (peak impulse current) C I Reverse Leakage Current -- Current measured at V R R V Forward Voltage Drop for Uni-directional F Ratings and Characteristic Curves (T=25°C unless otherwise noted) A Figure 1 - TVS Transients Clamping Waveform Figure 2 - Peak Pulse Power Rating Curve 100 Voltage Transients W) k Voltage Across TVS er ( 10 nt w urre Po e or C Current Through TVS ulse g P Volta eak 1 P -M PPP 0.2x0.2" (5.0x5.0mm) Copper Pad Area 0.1 0.001 0.01 0.1 1 Time t-Pulse Width (ms.) d continues on next page. © 2016 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 09/10/16

TVS Diodes Surface Mount – 600W > TPSMA6L series Ratings and Characteristic Curves (T=25°C unless otherwise noted) (Continued) A Figure 3 - Pulse Derating Curve Figure 4 - Pulse Waveform 100 150 Pulse Power (P)) or Current (IPPPPDerating in Percentage % 24680000 - Peak Pulse Current, % IMRSM 15000 tr=1PI0PeµPasMke cVaHIlPuaPelMf Va(lI Pu P1a2eTPac0sM usuJ / rd1=)ltrsh02eeee50nfi W °0tpnC dµioedeisdtnceh tabc( wyt.yds hW ) R teiosar. E ev5d .0eteAh%ffieon orpemfde IaPkP M ak IPP e P td 0 0 0 25 50 75 100 125 150 175 0 1.0 2.0 3.0 4.0 TJ - Initial Junction Temperature (ºC) t-Time (ms) Figure 5 - Typical Junction Capacitance Figure 6 - Steady State Power Dissipation Derating Curve W) 3.6 10000 n ( o RuJA=RuJL ati 3.0 p si 1000 Uni-directional V=0V Dis 2.4 er w Cj (pF) 100 Uni-directional @VR ate Po 1.8 y St 1.2 10 ad e RuJA=200°C/W Tj=25ºC St 0.6 1 fV=s1ig.0=M5H0mzVp-p P, M(AV) 0 1.0 10.0 100.0 1000.0 0 25 50 75 100 125 150 175 V - Reverse Breakdown Voltage (V) BR T - Ambient Temperature (ºC) A bargaining © 2016 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 09/10/16

TVS Diodes Surface Mount – 600W > TPSMA6L series Soldering Parameters Reflow Condition Lead–free assembly TP tp - Temperature Min (T ) 150°C Ramp-up Critical Zone PA(TrvLee) rHtaoeg apete raakm-- TTpeim muepp e(rmraatietnu (rtLeoi qMmuaaidxxu )( sT( stTs(sm(e)mimna)x)p) 26300°C 0–/° sC1e8c0o nsde cmsax emperature (T)TTTss((mmTainLx)) Prethseat tL Ramp-dToLw nto TP T to T - Ramp-up Rate 3°C/second max S(max) L 25˚C - Temperature (T) (Liquidus) 217°C t 25˚C to Peak Reflow L Time (t) - Time (min to max) (t) 60 – 150 seconds s Peak Temperature (T) 260+0/-5 °C P Time within 5°C of actual peak 20 – 40 seconds Environmental Specifications Temperature (t) p Ramp-down Rate 6°C/second max Time 25°C to peak Temperature (T) 8 minutes Max. High Temp. Storage JESD22-A103 P Do not exceed 260°C HTRB JESD22-A108 Physical Specifications Temperature Cycling JESD22-A104 Weight 0.002 ounce, 0.061 gram MSL JEDEC-J-STD-020, Level 1 JEDEC DO-221AC Molded Plastic over glass Case passivated junction H3TRB JESD22-A101 Polarity Color band denotes cathode except Bipolar RSH JESD22-A111 Matte Tin-plated leads, Solderable per Terminal JESD22-B102D Dimensions Cathode Band Inches Millimeters C Dimensions Min Max Min Max A 0.156 0.181 3.950 4.600 A B B 0.189 0.220 4.800 5.600 C 0.049 0.069 1.250 1.750 G D 0.088 0.116 2.250 2.950 E E F E 0.030 0.059 0.750 1.500 D F 0.005 0.010 0.125 0.250 G 0.035 0.043 0.900 1.100 3.12 (0.123) 1.20 (0.047) 1.52 (0.060) Mounting Pad Layout © 2016 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 09/10/16

TVS Diodes Surface Mount – 600W > TPSMA6L series Part Numbering System Part Marking System TPSMA6L xx A Cathode Band F 5% V VOLTAGE TOLERANCE Littelfuse Logo BR VR VOLTAGE XXX SERIES Marking Code YMXXX Trace Code Marking Y:Year Code M: Month Code XXX: Lot Code Packaging Component Packaging Packaging Part number Quantity Package Option Specification TPSMA6LxxA DO-221AC 3000 Tape & Reel – 12mm/7” tape EIA RS-481 Tape and Reel Specification 0.157 (4.0) 0.47 Cathode (12.0) 0.157 0.059 DIA Cover tape (4.0) (1.5) 7.0 (178) Dimensions are in inches 0.80 (20.2) (and millimeters). Arbor Hole Dia. Direction of Feed 0.49 (12.5) © 2016 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 09/10/16