TPS3803-01-EP TPS3803G15-EP TPS3805H33-EP www.ti.com SGLS227C − DECEMBER 2003 − REVISED JUNE 2007 VOLTAGE DETECTOR FEATURES DESCRIPTION (cid:1) Controlled Baseline The TPS3803 and TPS3805 families of supervisory circuits − One Assembly/Test Site, One Fabrication provide circuit initialization and timing supervision, primarily Site for DSPs and processor-based systems. (cid:1) Extended Temperature Performance of Up to The TPS3803G15 device has a fixed-sense threshold voltage −55°C to +125°C V set by an internal voltage divider, whereas the IT (cid:1) Enhanced Diminishing Manufacturing TPS3803−01 has an adjustable SENSE input that can be Sources (DMS) Support configured by two external resistors. In addition to the fixed (cid:1) sense threshold monitored at VDD, the TPS3805 devices Enhanced Product-Change Notification provide a second adjustable SENSE input. RESET is (cid:1) Qualification Pedigree(1) asserted in case any of the two voltages drops below V IT. (cid:1) Single Voltage Detector (TPS3803): During power on, RESET is asserted when supply voltage Adjustable/1.5 V V becomes higher than 0.8 V. Thereafter, the supervisory DD (cid:1) Dual Voltage Detector (TPS3805): circuit monitors VDD (and/or SENSE) and keeps RESET active as long as V or SENSE remains below the threshold Adjustable/3.3 V DD voltage V . As soon as V (SENSE) rises above the (cid:1) High ±1.5% Threshold Voltage Accuracy IT DD threshold voltage V , RESET is deasserted again. The IT (cid:1) Supply Current: 3 µA Typical at V = 3.3 V product spectrum is designed for 1.5V, 3.3 V, and adjustable DD (cid:1) supply voltages. The devices are available in a 5-pin SC-70 Push/Pull Reset Output (TPS3805) Open-Drain package. Reset Output (TPS3803) DCKPACKAGE (cid:1) 5-Pin SC−70 Package (TopView) (1)Component qualification in accordance with JEDEC and industry TPS3803−01,TPS3803G15,TPS3805 standards to ensure reliable operation over an extended NC 1 5 SENSE temperature range. This includes, but is not limited to, Highly NC(1) Accelerated Stress Test (HAST) or biased 85/85, temperature GND 2 cycle, autoclave or unbiased HAST, electromigration, bond intermetallic life, and mold compound life. Such qualification RESET 3 4 V testing should not be viewed as justifying use of this component DD beyond specified performance and environmental limits. (1)NC=NoConnectiononTPS3803G15 APPLICATIONS TypicalOperatingCircuit (cid:1) Applications Using DSPs, Microcontrollers, 1.6V 3.3V or Microprocessors (cid:1) Wireless Communication Systems (cid:1) Portable/Battery-Powered Equipment DVDD CVDD R1 V RESET RESET (cid:1) DD Programmable Controls (cid:1) TPS3805H33 TMS320VC5416 Intelligent Instruments (cid:1) Industrial Equipment SENSE GND GND (cid:1) R2 Notebook/Desktop Computers (cid:1) Automotive Systems Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of TexasInstruments semiconductor products and disclaimers thereto appears at the end of this data sheet. All trademarks are the property of their respective owners. (cid:1)(cid:2)(cid:3)(cid:4)(cid:5)(cid:6)(cid:7)(cid:8)(cid:3)(cid:9) (cid:4)(cid:10)(cid:7)(cid:10) (cid:11)(cid:12)(cid:13)(cid:14)(cid:15)(cid:16)(cid:17)(cid:18)(cid:11)(cid:14)(cid:12) (cid:11)(cid:19) (cid:20)(cid:21)(cid:15)(cid:15)(cid:22)(cid:12)(cid:18) (cid:17)(cid:19) (cid:14)(cid:13) (cid:23)(cid:21)(cid:24)(cid:25)(cid:11)(cid:20)(cid:17)(cid:18)(cid:11)(cid:14)(cid:12) (cid:26)(cid:17)(cid:18)(cid:22)(cid:27) (cid:1)(cid:15)(cid:14)(cid:26)(cid:21)(cid:20)(cid:18)(cid:19) Copyright  2003−2007, Texas Instruments Incorporated (cid:20)(cid:14)(cid:12)(cid:13)(cid:14)(cid:15)(cid:16) (cid:18)(cid:14) (cid:19)(cid:23)(cid:22)(cid:20)(cid:11)(cid:13)(cid:11)(cid:20)(cid:17)(cid:18)(cid:11)(cid:14)(cid:12)(cid:19) (cid:23)(cid:22)(cid:15) (cid:18)(cid:28)(cid:22) (cid:18)(cid:22)(cid:15)(cid:16)(cid:19) (cid:14)(cid:13) (cid:7)(cid:22)(cid:29)(cid:17)(cid:19) (cid:8)(cid:12)(cid:19)(cid:18)(cid:15)(cid:21)(cid:16)(cid:22)(cid:12)(cid:18)(cid:19) (cid:19)(cid:18)(cid:17)(cid:12)(cid:26)(cid:17)(cid:15)(cid:26) (cid:30)(cid:17)(cid:15)(cid:15)(cid:17)(cid:12)(cid:18)(cid:31)(cid:27) (cid:1)(cid:15)(cid:14)(cid:26)(cid:21)(cid:20)(cid:18)(cid:11)(cid:14)(cid:12) (cid:23)(cid:15)(cid:14)(cid:20)(cid:22)(cid:19)(cid:19)(cid:11)(cid:12)! (cid:26)(cid:14)(cid:22)(cid:19) (cid:12)(cid:14)(cid:18) (cid:12)(cid:22)(cid:20)(cid:22)(cid:19)(cid:19)(cid:17)(cid:15)(cid:11)(cid:25)(cid:31) (cid:11)(cid:12)(cid:20)(cid:25)(cid:21)(cid:26)(cid:22) (cid:18)(cid:22)(cid:19)(cid:18)(cid:11)(cid:12)! (cid:14)(cid:13) (cid:17)(cid:25)(cid:25) (cid:23)(cid:17)(cid:15)(cid:17)(cid:16)(cid:22)(cid:18)(cid:22)(cid:15)(cid:19)(cid:27) www.ti.com

(cid:7)(cid:1)"#$%#&%’&((cid:1) (cid:7)(cid:1)"#$%#)’*&((cid:1) (cid:7)(cid:1)"#$%*+##&((cid:1) www.ti.com SGLS227C − DECEMBER 2003 − REVISED JUNE 2007 This integrated circuit can be damaged by ESD. Texas Instruments recommends that all integrated circuits be handled with appropriate precautions. Failure to observe proper handling and installation procedures can cause damage. ESD damage can range from subtle performance degradation to complete device failure. Precision integrated circuits may be more susceptible to damage because very small parametric changes could cause the device not to meet its published specifications. PACKAGE INFORMATION THRESHOLD VOLTAGE TTAA DDEEVVIICCEE NNAAMMEE MMAARRKKIINNGG VDD SENSE TPS3803−01QDCKREP(2) NA 1.226 V AWH −−4400(cid:2)CC ttoo ++112255(cid:2)CC TPS3803G15QDCKREP(2) 1.4 V NA AXT TPS3805H33QDCKREP(2) 3.05 V 1.226 V AWY TPS3803−01MDCKREP(2) NA 1.226 V BAY −−5555(cid:2)CC ttoo ++112255(cid:2)CC TPS3803G15MDCKREP(2) 1.40 V NA ARH TPS3805H33MDCKREP(2) 3.05 V 1.226 V ARJ (2)The DCKR passive indicates tape and reel containing 3000 parts. ORDERING INFORMATION TPS380 3 G 15 Q DCK R EP Enhanced Plastic Designator Reel Package Temperature Designator Nominal Supply Voltage Nominal Threshold Voltage Functionality Family Function/Truth Tables TPS3803-01 TPS3803G15 SENSE > VIT RESET VDD > VIT RESET 0 L 0 L 1 H 1 H TPS3805H33 VDD > VIT SENSE > VIT RESET 0 0 L 0 1 L 1 0 L 1 1 H 2

(cid:7)(cid:1)"#$%#&%’&((cid:1) (cid:7)(cid:1)"#$%#)’*&((cid:1) (cid:7)(cid:1)"#$%*+##&((cid:1) www.ti.com SGLS227C − DECEMBER 2003 − REVISED JUNE 2007 FUNCTIONAL BLOCK DIAGRAM TPS3803G15 TPS3803−01 Device VDD SupplyVoltage R1 RESET VDD _ _ RESET SENSE + R2 + GND GND Reference Reference Voltage Voltage of1.215V of1.226V TPS3805 _ SENSE + RESET R1 _ VDD + R2 GND Reference Voltage of1.226V 3

(cid:7)(cid:1)"#$%#&%’&((cid:1) (cid:7)(cid:1)"#$%#)’*&((cid:1) (cid:7)(cid:1)"#$%*+##&((cid:1) www.ti.com SGLS227C − DECEMBER 2003 − REVISED JUNE 2007 TIMING REQUIREMENTS VDD or SENSE VIT + Vhys VIT 0.8 V RESET = Undefined Terminal Functions TERMINAL II//OO DDEESSCCRRIIPPTTIIOONN NAME NO. GND 2 I Ground RESET 3 O Active-low reset output (TPS3803—open-drain, TPS3805—push/pull) SENSE 5 I Adjustable sense input NC 1 No internal connection NC (TPS3803G15) 5 No internal connection VDD 4 I Input supply voltage, fixed sense input for TPS3803G15 and TPS3805 4

(cid:7)(cid:1)"#$%#&%’&((cid:1) (cid:7)(cid:1)"#$%#)’*&((cid:1) (cid:7)(cid:1)"#$%*+##&((cid:1) www.ti.com SGLS227C − DECEMBER 2003 − REVISED JUNE 2007 ABSOLUTE MAXIMUM RATINGS(1) Over operating free-air temperature, unless otherwise noted. Supply voltage, V (2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . +7 V DD All other pins(2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −0.3 V to +7 V Maximum low-output current, I . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . +5 mA OL Maximum high-output current, I . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −5 mA OH Input clamp current, IIK (VI < 0 or VI > VDD) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±10 mA Output clamp current, IOK (VO < 0 or VO > VDD) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±10 mA Continuous total power dissipation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . See Dissipation Rating Table Operating free-air temperature range, T . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −55°C to +125°C A Storage temperature range, T ,(3) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −65°C to +150°C stg (1)Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. (2)All voltage values are with respect to GND. For reliable operation the device should not be continuously operated at 7 V for more than t = 1000 h. (3)Long-term high-temperature storage and/or extended use at maximum recommended operating conditions may result in a reduction of overall device life. See www.ti.com/ep_quality for additional information on enhanced plastic packaging. DISSIPATION RATING TABLE PACKAGE TA < +25°C DERATING FACTOR TA = +70°C TA = +85°C POWER RATING ABOVE TA = +25°C POWER RATING POWER RATING DCK 321 mW 2.6 mW/°C 206 mW 167 mW RECOMMENDED OPERATING CONDITIONS MIN MAX UNIT Supply voltage, VDD 1.3 6 V Input voltage, VI 0 VDD + 0.3 V Q suffix devices −40 +125 OOppeerraattiinngg ffrreeee--aaiirr tteemmppeerraattuurree rraannggee,, TTAA °°CC M suffix devices −55 +125 5

(cid:7)(cid:1)"#$%#&%’&((cid:1) (cid:7)(cid:1)"#$%#)’*&((cid:1) (cid:7)(cid:1)"#$%*+##&((cid:1) www.ti.com SGLS227C − DECEMBER 2003 − REVISED JUNE 2007 ELECTRICAL CHARACTERISTICS Over recommended operating free-air temperature range, unless otherwise noted. PARAMETER TEST CONDITIONS MIN TYP MAX UNIT VDD = 1.5 V, IOH = −0.5 mA VVOOHH HHiigghh--lleevveell oouuttppuutt vvoollttaaggee ((TTPPSS33880055 oonnllyy)) VDD = 3.3 V, IOH = −1 mA 00..88 xx VVDDDD VV VDD = 6 V, IOH = −1.5 mA VDD = 1.5 V, IOL = 1 mA VVOOLL LLooww--lleevveell oouuttppuutt vvoollttaaggee VDD = 3.3 V, IOL = 2 mA 00..33 VV VDD = 6 V, IOL = 3 mA VIT > 1.5 V, TA = +25°C 0.8 V PPoowweerr--uupp rreesseett vvoollttaaggee((11)) VIT ≤ 1.5 V, TA = +25°C 1 V SENSE 1.2 1.226 1.244 NNeeggaattiivvee--ggooiinngg iinnppuutt tthhrreesshhoolldd VVIITT vvoollttaaggee((22)) TPS3803G15 1.379 1.4 1.421 VV TPS3805H33 3.004 3.05 3.096 1.2 V < VIT < 2.5 V 15 VVhhyyss HHyysstteerreessiiss 2.5 V < VIT < 3.5 V 30 mmVV II Input current SENSE −25 25 nA IOH High-level output current at RESET Open-drain only VDD = VIT + 0.2V, VOH = VDD 300 nA TPS3803−01 2 4 TPS3805, VDD = 3.3 V, output unconnected 3 5 TPS3803G15 IIDDDD SSuuppppllyy ccuurrrreenntt µAA TPS3803−01 2 4 TPS3805, VDD = 6 V, output unconnected 4 6 TPS3803G15 CI Input capacitance VI = 0 V to VDD 1 pF (1)The lowest supply voltage at which RESET (VOL(max) = 0.2 V, IOL = 50 µA) becomes active. tr(VDD) ≥15 µs/V (2)To ensure the best stability of the threshold voltage, place a bypass capacitor (ceramic, 0.1 µF) near the supply terminals. TIMING REQUIREMENTS AT RL = 1 MΩ, CL = 50 PF, over recommended operating free-air temperature range. PARAMETER TEST CONDITIONS MIN TYP MAX UNIT At VDD ttww PPuullssee wwiiddtthh VVIIHH == 11..0055 xx VVIITT,, VVIILL == 00..9955 xx VVIITT 55..55 µss At SENSE SWITCHING CHARACTERISTICS AT RL = 1 MΩ, CL = 50 PF, over recommended operating free-air temperature range. PARAMETER TEST CONDITIONS MIN TYP MAX UNIT PPrrooppaaggaattiioonn ((ddeellaayy)) ttiimmee,, VDD to RESET delay ttPPHHLL high-to-low-level output SENSE to RESET delay VVIIHH == 11..0055 xx VVIITT,, 55 110000 VVIILL == 00..9955 xx VVIITT µss PPrrooppaaggaattiioonn ((ddeellaayy)) ttiimmee,, VDD to RESET delay ttPPLLHH low-to-high-level output SENSE to RESET delay 55 110000 6

(cid:7)(cid:1)"#$%#&%’&((cid:1) (cid:7)(cid:1)"#$%#)’*&((cid:1) (cid:7)(cid:1)"#$%*+##&((cid:1) www.ti.com SGLS227C − DECEMBER 2003 − REVISED JUNE 2007 TYPICAL CHARACTERISTICS TPS3805H33 TPS3803−01 SUPPLY CURRENT SUPPLY CURRENT vs vs SUPPLY VOLTAGE SUPPLY VOLTAGE 6 3 SENSE = GND RESET = Open 5 2.5 A A µ− 4 µ− 2 nt nt e e urr urr ply C 3 85°C ply C 1.5 85°C p p u u S 2 25°C S 1 25°C − − DD 0°C DD 0°C I −40°C I 1 0.5 −40°C SENSE = GND RESET = Open 0 0 0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 5 5.5 6 0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 5 5.5 6 VDD − Supply Voltage − V VDD − Supply Voltage − V Figure 1 Figure 2 LOW-LEVEL OUTPUT VOLTAGE LOW-LEVEL OUTPUT VOLTAGE vs vs LOW-LEVEL OUTPUT CURRENT LOW-LEVEL OUTPUT CURRENT 1.60 0.50 (Expanded View) VDD = 1.5 V 0.45 VDD = 1.5 V V 1.40 V(SENSE) = Low V V(SENSE) = Low − − 0.40 ge 1.20 ge 85°C a a Volt 85°C Volt 0.35 25°C put 1.00 25°C put 0.30 0°C ut ut el O 0.80 0°C el O 0.25 −40°C v v Le 0.60 −40°C Le 0.20 w- w- o o 0.15 L L − 0.40 − L L 0.10 O O V V 0.20 0.05 0 0 0 1 2 3 4 5 0 0.5 1 1.5 2 2.5 3 IOL − Low-Level Output Current − mA IOL − Low-Level Output Current − mA Figure 3 Figure 4 7

(cid:7)(cid:1)"#$%#&%’&((cid:1) (cid:7)(cid:1)"#$%#)’*&((cid:1) (cid:7)(cid:1)"#$%*+##&((cid:1) www.ti.com SGLS227C − DECEMBER 2003 − REVISED JUNE 2007 TYPICAL CHARACTERISTICS LOW-LEVEL OUTPUT VOLTAGE LOW-LEVEL OUTPUT VOLTAGE vs vs LOW-LEVEL OUTPUT CURRENT LOW-LEVEL OUTPUT CURRENT 3.5 1 VDD = 6 V VDD = 6 V 0.9 V(SENSE) = Low 3 V(SENSE) = Low V V − 0.8 85°C oltage − 2.5 25°C85°C Voltage 0.7 0°C25°C ut V 2 0°C put 0.6 −40°C utp Out 0.5 vel O 1.5 −40°C evel 0.4 e L w-L ow- 0.3 o 1 L L − − L 0.2 (Expanded View) L O VO 0.5 V 0.1 0 0 0 5 10 15 20 25 30 35 40 45 50 0 2 4 6 8 10 12 14 16 18 20 IOL − Low-Level Output Current − mA IOL − Low-Level Output Current − mA Figure 5 Figure 6 TPS3805H33 TPS3805H33 HIGH-LEVEL OUTPUT VOLTAGE HIGH-LEVEL OUTPUT VOLTAGE vs vs HIGH-LEVEL OUTPUT CURRENT HIGH-LEVEL OUTPUT CURRENT 3.5 3.3 VDD = 3.3 V VDD = 3.3 V V 3.25 V(SENSE) = High V 3.2 V(SENSE) = High − − ge 3 ge 3.1 a a olt olt V V put 2.75 85°C put 3 85°C ut ut O 2.5 O 2.9 25°C vel 25°C vel Le 2.25 Le 2.8 0°C gh- 0°C gh- −40°C − Hi 2 −40°C − Hi 2.7 H H O O V 1.75 V 2.6 (Expanded View) 1.5 2.5 −14 −12 −10 −8 −6 −4 −2 0 −5 −4 −3 −2 −1 0 IOH − High-Level Output Current − mA IOH − High-Level Output Current − mA Figure 7 Figure 8 8

(cid:7)(cid:1)"#$%#&%’&((cid:1) (cid:7)(cid:1)"#$%#)’*&((cid:1) (cid:7)(cid:1)"#$%*+##&((cid:1) www.ti.com SGLS227C − DECEMBER 2003 − REVISED JUNE 2007 TYPICAL CHARACTERISTICS TPS3805H33 TPS3805H33 HIGH-LEVEL OUTPUT VOLTAGE HIGH-LEVEL OUTPUT VOLTAGE vs vs HIGH-LEVEL OUTPUT CURRENT HIGH-LEVEL OUTPUT CURRENT 6 6 VDD = 6 V V(SENSE) = High VDD = 6 V ge − V 5.5 ge − V 5.8 V(SENSE) = High Volta 5 Volta 5.6 ut ut utp 85°C utp 5.4 85°C O 4.5 O gh-Level 4 25°C gh-Level 5.2 −40°C02°C5°C − Hi 0°C − Hi 5 H H O 3.5 O V −40°C V 4.8 (Expanded View) 3 4.6 −4 −3 −2 −1 0 −14 −12 −10 −8 −6 −4 −2 0 IOH − High-Level Output Current − mA IOH − High-Level Output Current − mA Figure 9 Figure 10 TPS3803−01 NORMALIZED INPUT THRESHOLD VOLTAGE MINIMUM PULSE DURATION AT V DD vs vs C) FREE-AIR TEMPERATURE AT SENSE VDD THRESHOLD OVERDRIVE VOLTAGE ° 5 21.0020 10 (T VI V(T) / ITA11..00001105 VRDEDSE =T 6 = V 100 kΩ to VDD µV − sDD 89 ge at 7 a n Volt1.0005 atio 6 old 1.0000 Dur 5 nput Thresh0.9995 mum Pulse 43 ed I0.9990 Mini 2 maliz0.9985 − w 1 r t o N − T0.9980−40 −20 0 20 40 60 80 00 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1 VI TA − Free-Air Temperature at SENSE − °C VDD − Threshold Overdrive Voltage − V Figure 11 Figure 12 9

(cid:7)(cid:1)"#$%#&%’&((cid:1) (cid:7)(cid:1)"#$%#)’*&((cid:1) (cid:7)(cid:1)"#$%*+##&((cid:1) www.ti.com SGLS227C − DECEMBER 2003 − REVISED JUNE 2007 TYPICAL CHARACTERISTICS MINIMUM PULSE DURATION AT SENSE vs SENSE THRESHOLD OVERDRIVE VOLTAGE 10 s µ 9 − E S 8 N E S 7 at n o 6 ati r u 5 D e s ul 4 P m 3 u m ni 2 Mi − w 1 t 0 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1 SENSE − Threshold Overdrive Voltage − V Figure 13 10

Revision History DATE REV PAGE SECTION DESCRIPTION Front Page — Updated front page. 66//0077 CC 3 — Functional block diagram change. NOTE: Page numbers for previous revisions may differ from page numbers in the current version.

PACKAGE OPTION ADDENDUM www.ti.com 6-Feb-2020 PACKAGING INFORMATION Orderable Device Status Package Type Package Pins Package Eco Plan Lead/Ball Finish MSL Peak Temp Op Temp (°C) Device Marking Samples (1) Drawing Qty (2) (6) (3) (4/5) TPS3803-01MDCKREP ACTIVE SC70 DCK 5 3000 Green (RoHS NIPDAU Level-1-260C-UNLIM -55 to 125 BAY & no Sb/Br) TPS3803-01QDCKREP ACTIVE SC70 DCK 5 3000 Green (RoHS NIPDAU Level-1-260C-UNLIM -40 to 125 AWH & no Sb/Br) TPS3803G15MDCKREP ACTIVE SC70 DCK 5 3000 Green (RoHS NIPDAUAG Level-1-260C-UNLIM -55 to 125 ARH & no Sb/Br) TPS3803G15QDCKREP ACTIVE SC70 DCK 5 3000 Green (RoHS NIPDAUAG Level-1-260C-UNLIM -40 to 125 AXT & no Sb/Br) TPS3805H33MDCKREP ACTIVE SC70 DCK 5 3000 Green (RoHS NIPDAUAG Level-1-260C-UNLIM -55 to 125 ARJ & no Sb/Br) TPS3805H33QDCKREP ACTIVE SC70 DCK 5 3000 Green (RoHS NIPDAUAG Level-1-260C-UNLIM -40 to 125 AWY & no Sb/Br) V62/04648-01XE ACTIVE SC70 DCK 5 3000 Green (RoHS NIPDAU Level-1-260C-UNLIM -40 to 125 AWH & no Sb/Br) V62/04648-02XE ACTIVE SC70 DCK 5 3000 Green (RoHS NIPDAUAG Level-1-260C-UNLIM -40 to 125 AXT & no Sb/Br) V62/04648-03XE ACTIVE SC70 DCK 5 3000 Green (RoHS NIPDAUAG Level-1-260C-UNLIM -40 to 125 AWY & no Sb/Br) V62/04648-04XE ACTIVE SC70 DCK 5 3000 Green (RoHS NIPDAU Level-1-260C-UNLIM -55 to 125 BAY & no Sb/Br) V62/04648-05XE ACTIVE SC70 DCK 5 3000 Green (RoHS NIPDAUAG Level-1-260C-UNLIM -55 to 125 ARH & no Sb/Br) V62/04648-06XE ACTIVE SC70 DCK 5 3000 Green (RoHS NIPDAUAG Level-1-260C-UNLIM -55 to 125 ARJ & no Sb/Br) (1) The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. (2) RoHS: TI defines "RoHS" to mean semiconductor products that are compliant with the current EU RoHS requirements for all 10 RoHS substances, including the requirement that RoHS substance do not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, "RoHS" products are suitable for use in specified lead-free processes. TI may reference these types of products as "Pb-Free". RoHS Exempt: TI defines "RoHS Exempt" to mean products that contain lead but are compliant with EU RoHS pursuant to a specific EU RoHS exemption. Addendum-Page 1

PACKAGE OPTION ADDENDUM www.ti.com 6-Feb-2020 Green: TI defines "Green" to mean the content of Chlorine (Cl) and Bromine (Br) based flame retardants meet JS709B low halogen requirements of <=1000ppm threshold. Antimony trioxide based flame retardants must also meet the <=1000ppm threshold requirement. (3) MSL, Peak Temp. - The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature. (4) There may be additional marking, which relates to the logo, the lot trace code information, or the environmental category on the device. (5) Multiple Device Markings will be inside parentheses. Only one Device Marking contained in parentheses and separated by a "~" will appear on a device. If a line is indented then it is a continuation of the previous line and the two combined represent the entire Device Marking for that device. (6) Lead/Ball Finish - Orderable Devices may have multiple material finish options. Finish options are separated by a vertical ruled line. Lead/Ball Finish values may wrap to two lines if the finish value exceeds the maximum column width. Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis. OTHER QUALIFIED VERSIONS OF TPS3803-EP, TPS3805H33-EP : •Catalog: TPS3803, TPS3805H33 •Automotive: TPS3803-Q1, TPS3805H33-Q1 NOTE: Qualified Version Definitions: •Catalog - TI's standard catalog product •Automotive - Q100 devices qualified for high-reliability automotive applications targeting zero defects Addendum-Page 2

PACKAGE MATERIALS INFORMATION www.ti.com 3-Aug-2017 TAPE AND REEL INFORMATION *Alldimensionsarenominal Device Package Package Pins SPQ Reel Reel A0 B0 K0 P1 W Pin1 Type Drawing Diameter Width (mm) (mm) (mm) (mm) (mm) Quadrant (mm) W1(mm) TPS3803-01MDCKREP SC70 DCK 5 3000 180.0 8.4 2.4 2.5 1.2 4.0 8.0 Q3 TPS3803-01QDCKREP SC70 DCK 5 3000 180.0 8.4 2.4 2.5 1.2 4.0 8.0 Q3 TPS3803G15MDCKREP SC70 DCK 5 3000 180.0 8.4 2.41 2.41 1.2 4.0 8.0 Q3 TPS3803G15QDCKREP SC70 DCK 5 3000 180.0 8.4 2.41 2.41 1.2 4.0 8.0 Q3 TPS3805H33MDCKREP SC70 DCK 5 3000 180.0 8.4 2.41 2.41 1.2 4.0 8.0 Q3 TPS3805H33QDCKREP SC70 DCK 5 3000 180.0 8.4 2.41 2.41 1.2 4.0 8.0 Q3 PackMaterials-Page1

PACKAGE MATERIALS INFORMATION www.ti.com 3-Aug-2017 *Alldimensionsarenominal Device PackageType PackageDrawing Pins SPQ Length(mm) Width(mm) Height(mm) TPS3803-01MDCKREP SC70 DCK 5 3000 202.0 201.0 28.0 TPS3803-01QDCKREP SC70 DCK 5 3000 202.0 201.0 28.0 TPS3803G15MDCKREP SC70 DCK 5 3000 202.0 201.0 28.0 TPS3803G15QDCKREP SC70 DCK 5 3000 202.0 201.0 28.0 TPS3805H33MDCKREP SC70 DCK 5 3000 202.0 201.0 28.0 TPS3805H33QDCKREP SC70 DCK 5 3000 202.0 201.0 28.0 PackMaterials-Page2

None

None

IMPORTANTNOTICEANDDISCLAIMER TI PROVIDES TECHNICAL AND RELIABILITY DATA (INCLUDING DATASHEETS), DESIGN RESOURCES (INCLUDING REFERENCE DESIGNS), APPLICATION OR OTHER DESIGN ADVICE, WEB TOOLS, SAFETY INFORMATION, AND OTHER RESOURCES “AS IS” AND WITH ALL FAULTS, AND DISCLAIMS ALL WARRANTIES, EXPRESS AND IMPLIED, INCLUDING WITHOUT LIMITATION ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY RIGHTS. These resources are intended for skilled developers designing with TI products. You are solely responsible for (1) selecting the appropriate TI products for your application, (2) designing, validating and testing your application, and (3) ensuring your application meets applicable standards, and any other safety, security, or other requirements. These resources are subject to change without notice. TI grants you permission to use these resources only for development of an application that uses the TI products described in the resource. Other reproduction and display of these resources is prohibited. No license is granted to any other TI intellectual property right or to any third party intellectual property right. TI disclaims responsibility for, and you will fully indemnify TI and its representatives against, any claims, damages, costs, losses, and liabilities arising out of your use of these resources. TI’s products are provided subject to TI’s Terms of Sale (www.ti.com/legal/termsofsale.html) or other applicable terms available either on ti.com or provided in conjunction with such TI products. TI’s provision of these resources does not expand or otherwise alter TI’s applicable warranties or warranty disclaimers for TI products. Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright © 2020, Texas Instruments Incorporated