TLV2422, TLV2422A, TLV2422Y Advanced LinCMOS RAIL-TO-RAIL OUTPUT WIDE-INPUT-VOLTAGE MICROPOWER DUAL OPERATIONAL AMPLIFIERS SLOS199C – SEPTEMBER 1997 – REVISED APRIL 2001 (cid:0) (cid:0) Output Swing Includes Both Supply Rails Low Input Bias Current...1 pA Typ (cid:0) (cid:0) Extended Common-Mode Input Voltage Micropower Operation...50 µA Per Range...0 V to 4.5 V (Min) With 5-V Single Channel Supply (cid:0) 600-Ω Output Drive (cid:0) No Phase Inversion (cid:0) Available in Q-Temp Automotive (cid:0) Low Noise...18 nV/√Hz Typ at f = 1 kHz HighRel Automotive Applications (cid:0) Low Input Offset Voltage Configuration Control / Print Support 950 µV Max at T = 25°C (TLV2422A) Qualification to Automotive Standards A description HIGH-LEVEL OUTPUT VOLTAGE The TLV2422 and TLV2422A are dual low-voltage vs operational amplifiers from Texas Instruments. HIGH-LEVEL OUTPUT CURRENT The common-mode input voltage range for this 5 device has been extended over the typical CMOS VDD = 5 V amplifiers making them suitable for a wide range ophf aaspep liicnavteiortn sw. hIenn atdhdei ticoonm, mthoen d-mevoidcees indpou tn oist e – V 4 TA = –40°C driven to the supply rails. This satisfies most ag TA = 25°C design requirements without paying a premium olt V for rail-to-rail input performance. They also exhibit ut 3 p rail-to-rail output performance for increased ut O dynamic range in single- or split-supply el applications. This family is fully characterized at ev 2 3-V and 5-V supplies and is optimized for h-L TA = 85°C g low-voltage operation. The TLV2422 only requires Hi 50 µA of supply current per channel, making it – H 1 ideal for battery-powered applications. The VO TA = 125°C TLV2422 also has increased output drive over previous rail-to-rail operational amplifiers and can 0 drive 600-Ω loads for telecom applications. 0 4 8 12 16 20 24 28 32 36 40 IOH – High-Level Output Current – mA Other members in the TLV2422 family are the high-power, TLV2442, and low-power, TLV2432, Figure 1 versions. The TLV2422, exhibiting high input impedance and low noise, is excellent for small-signal conditioning for high-impedance sources, such as piezoelectric transducers. Because of the micropower dissipation levels and low-voltage operation, these devices work well in hand-held monitoring and remote-sensing applications. In addition, the rail-to-rail output feature with single- or split-supplies makes this family a great choice when interfacing with analog-to-digital converters (ADCs). For precision applications, the TLV2422A is available with a maximum input offset voltage of 950 µV. If the design requires single operational amplifiers, see the TI TLV2211/21/31. This is a family of rail-to-rail output operational amplifiers in the SOT-23 package. Their small size and low power consumption, make them ideal for high density, battery-powered equipment. Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of TexasInstruments semiconductor products and disclaimers thereto appears at the end of this data sheet. Advanced LinCMOS is a trademark of Texas Instruments. PRODUCTION DATA information is current as of publication date. Copyright  2001, Texas Instruments Incorporated Products conform to specifications per the terms of Texas Instruments On products compliant to MIL-PRF-38535, all parameters are tested standard warranty. Production processing does not necessarily include unless otherwise noted. On all other products, production testing of all parameters. processing does not necessarily include testing of all parameters. POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 1

TLV2422, TLV2422A, TLV2422Y Advanced LinCMOS RAIL-TO-RAIL OUTPUT WIDE-INPUT-VOLTAGE MICROPOWER DUAL OPERATIONAL AMPLIFIERS SLOS199C – SEPTEMBER 1997 – REVISED APRIL 2001 AVAILABLE OPTIONS PACKAGED DEVICES VIOmax SMALL CERAMIC CHIP FORM TA AT 25°C OUTLINE CHIP CARRIER CERAMIC DIP TSSOP FLAT PACK (Y) (FK) (JG) (PW) (D) (U) 0°C to 70°C 2.5 mV TLV2422CD — — TLV2422CPWLE — 950 µµV TLV2422AID — — TLV2422AIPWLE — –4400°°CC ttoo 8855°°CC 2.5 mV TLV2422ID — — — — 950 µµV TLV2422AQD — — — — TLV2422Y –4400°°CC ttoo 112255°°CC 2.5 mV TLV2422QD — — — — 950 µµV — TLV2422AMFK TLV2422AMJG — TLV2422AMU ––5555°°CC ttoo 112255°°CC 2 mV — TLV2422MFK TLV2422MJG — TLV2422MU The D packages are available taped and reeled. Add R suffix to device type (e.g., TLV2422CDR). The PW package is available only left-end taped and reeled. Chips are tested at 25°C. D OR JG PACKAGE PW PACKAGE (TOP VIEW) (TOP VIEW) 1OUT 1 8 VDD+ 1OUT 1 8 VDD+ 1IN– 2 7 2OUT 1IN– 2 7 2OUT 1IN+ 3 6 2IN– 1IN+ 3 6 2IN– V /GND 4 5 2IN+ VDD–/GND 4 5 2IN+ DD– FK PACKAGE (TOP VIEW) T + U D C O C DC N 1 N VN U PACKAGE (TOP VIEW) 3 2 1 20 19 NC 4 18 NC 1IN– 5 17 2OUT NC 1 10 NC NC 6 16 NC 1OUT 2 9 VDD+ 1IN+ 7 15 2IN– 1IN– 3 8 2OUT NC 8 14 NC 1IN+ 4 7 2IN– 9 10 11 12 13 VDD–/GND 5 6 2IN+ CD C+ C NN NN N G 2I / – D D V NNCC –– NNoo iinntteerrnnaall ccoonnnneeccttiioonn 2 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265

equivalent schematic (each amplifier) COMPONENT COUNT Q22 Q29 Q31 Q34 Q36 Transistors 69 Diodes 5 Resistors 26 VB3 Capacitors 6 Q26 W Q24 Q32 VB2 ID E VB1 VDD+ - I N P Q25 Q27 Q33 Q35 VB4 U T - V P O O ST Q23 Q30 L O T F Q37 A F IC R10 G E B R9 D1 E O X M 6 553 IC 03 R DA• Q3 R3 R4 R7 OPAd LL Q13 Q15 Ov AS, T Wan EXAS 75265 IINN+– Q1 Q4 Q6 Q8 Q10 Q18 Q20 SLER DUced Li O n SAC Q7 Q9 C1 R5 C2 VDD–/GND 199C – SL OPMOS VB3 Q11 Q16 R6 C3 OUT EPTEMERAR BTA VB2 Q2 Q5 Q14 Q21 ER 1997 –IONALIL-TOTLV24 RE A-R22 Q12 Q17 Q19 VISEMPAIL, T D L R1 R2 AL OV R8 PRIFU2 VB4 IL 2001IERSTPU422A 3 T

TLV2422, TLV2422A Advanced LinCMOS RAIL-TO-RAIL OUTPUT WIDE-INPUT-VOLTAGE MICROPOWER DUAL OPERATIONAL AMPLIFIERS SLOS199C – SEPTEMBER1997 – REVISED APRIL 2001 absolute maximum ratings over operating free-air temperature range (unless otherwise noted)† Supply voltage, V (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 V DD Differential input voltage, V (see Note 2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±V ID DD Input voltage, V (any input, see Note 1): C and I suffix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –0.3 V to V I DD Input current, I (each input) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±5 mA I Output current, I . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±50 mA O Total current into V . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±50 mA DD+ Total current out of V . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±50 mA DD– Duration of short-circuit current at (or below) 25°C (see Note 3) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . unlimited Continuous total power dissipation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . See Dissipation Rating Table Operating free-air temperature range, T : C suffix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0°C to 70°C A I suffix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –40°C to 85°C Q suffix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –40°C to 125°C M suffix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –55°C to 125°C Storage temperature range, T . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –65°C to 150°C stg Lead temperature 1,6 mm (1/16 inch) from case for 10 seconds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 260°C †Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. NOTES: 1. All voltage values, except differential voltages, are with respect to the midpoint between VDD+ and VDD–. 2. Differential voltages are at IN+ with respect to IN–. Excessive current flows if input is brought below VDD– – 0.3 V. 3. The output may be shorted to either supply. Temperature and/or supply voltages must be limited to ensure that the maximum dissipation rating is not exceeded. DISSIPATION RATING TABLE PPAACCKKAAGGEE TAA ≤ 25°C DERATING FACTOR TAA = 70°C TAA = 85°C TAA = 125°C POWER RATING ABOVE TA = 25°C POWER RATING POWER RATING POWER RATING D 725 mW 5.8 mW/°C 464 mW 377 mW 145 mW FK 1375 mW 11.0 mW/°C 880 mW 715 mW 275 mW JJGG 11005500 mmWW 88.44 mmWW//°°CC 667722 mmWW 554466 mmWW 221100 mmWW PPWW 552255 mmWW 44..22 mmWW//°CC 333366 mmWW 227733 mmWW 110055 mmWW U 675 mW 5.4 mW/°C 432 mW 350 mW 135 mW recommended operating conditions C SUFFIX I SUFFIX Q SUFFIX M SUFFIX UUNNIITT MIN MAX MIN MAX MIN MAX MIN MAX Supply voltage, VDD± 2.7 10 2.7 10 2.7 10 2.7 10 V Input voltage range, VI VDD– VDD+ –0.8 VDD– VDD+ –0.8 VDD– VDD+ –0.8 VDD– VDD+ –0.8 V Common-mode input voltage, VIC VDD– VDD+ –0.8 VDD– VDD+ –0.8 VDD– VDD+ –0.8 VDD– VDD+ –0.8 V Operating free-air temperature, TA 0 70 –40 85 –40 125 –55 125 °C 4 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265

TLV2422, TLV2422A Advanced LinCMOS RAIL-TO-RAIL OUTPUT WIDE-INPUT-VOLTAGE MICROPOWER DUAL OPERATIONAL AMPLIFIERS SLOS199C – SEPTEMBER1997 – REVISED APRIL 2001 electrical characteristics at specified free-air temperature, V = 3 V (unless otherwise noted) DD TLV2422C PPAARRAAMMEETTEERR TTEESSTT CCOONNDDIITTIIOONNSS TTA†† UUNNIITT MIN TYP MAX 25°C 300 2000 VVIIOO IInnppuutt ooffffsseett vvoollttaaggee µµVV Full range 2500 25°C ααVVIIOO TTeemmppeerraattuurree ccooeeffffiicciieenntt ooff iinnppuutt ooffffsseett vvoollttaaggee to 70°C 22 µµVV//°°CC Input offset voltage long-term drift (see Note 4) VIC = 0, VDD± = ±2.5 V, 25°C 0.003 µV/mo VVOO == 00, RRSS == 5500 ΩΩ 25°C 0.5 60 IIIIOO IInnppuutt ooffffsseett ccuurrrreenntt ppAA Full range 150 25°C 1 60 IIIIBB IInnppuutt bbiiaass ccuurrrreenntt ppAA Full range 150 0 –0.25 25°C to to 2.5 2.75 VVIICCRR CCoommmmoonn-mmooddee iinnppuutt vvoollttaaggee rraannggee ||VVIIOO|| ≤≤ 55 mmVV, RRSS == 5500 ΩΩ VV 0 Full range to 2.2 IOH = –100 µA 25°C 2.97 VOH High-level output voltage 25°C 2.75 V IIOOHH == –550000 µµAA Full range 2.5 VIC = 0, IOL = 100 µA 25°C 0.05 VOL Low-level output voltage 25°C 0.2 V VVIICC == 00, IIOOLL == 225500 µµAA Full range 0.5 25°C 6 10 AVVDD Largge-siggnal differential voltagge amplification VVVVIOOC === 1122 .VV55 ttVVoo, 22 VV RRL = 1100 kkΩΩ‡‡ Full range 3 V/mV RL = 1 MΩ‡ 25°C 700 ri(d) Differential input resistance 25°C 1012 Ω ri(c) Common-mode input resistance 25°C 1012 Ω ci(c) Common-mode input capacitance f = 10 kHz 25°C 8 pF zo Closed-loop output impedance f = 100 kHz, AV = 10 25°C 130 Ω CCMMRRRR CCoommmmoonn-mmooddee rreejjeeccttiioonn rraattiioo VIICC = 0 to 2.5 V,, VOO = 1.5 V,, 25°C 70 83 ddBB RS = 50Ω Full range 70 kkSSVVRR SSuuppppllyy-vvoollttaaggee rreejjeeccttiioonn rraattiioo ((∆∆VVDDDD//∆∆VVIIOO)) VDDDD = 2.7 V to 8 V,, 25°C 80 95 ddBB VIC = VDD/2, No load Full range 80 25°C 100 150 IIDDDD SSuuppppllyy ccuurrrreenntt VVOO == 11.55 VV, NNoo llooaadd µµAA Full range 175 †Full range is 0°C to 70°C. ‡Referenced to 2.5 V NOTE 4: Typical values are based on the input offset voltage shift observed through 500 hours of operating life test at TA = 150°C extrapolated to TA = 25°C using the Arrhenius equation and assuming an activation energy of 0.96 eV. POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 5

TLV2422, TLV2422A Advanced LinCMOS RAIL-TO-RAIL OUTPUT WIDE-INPUT-VOLTAGE MICROPOWER DUAL OPERATIONAL AMPLIFIERS SLOS199C – SEPTEMBER1997 – REVISED APRIL 2001 electrical characteristics at specified free-air temperature, V = 3 V (unless otherwise noted) DD TLV2422I TLV2422AI PPAARRAAMMEETTEERR TTEESSTT CCOONNDDIITTIIOONNSS TTA†† UUNNIITT MIN TYP MAX MIN TYP MAX 25°C 300 2000 300 950 VVIIOO IInnppuutt ooffffsseett vvoollttaaggee µµVV Full range 2500 1500 Temperature 25°C ααVVIIOO ccooeeffffiicciieenntt ooff iinnppuutt to 70°C 22 22 µµVV//°°CC offset voltage Input offset voltage VIC = 0, VDD± = ±2.5 V, long-term drift (see VO = 0, RS = 50 Ω 25°C 0.003 0.003 µV/mo Note 4) 25°C 0.5 60 0.5 60 IIIIOO IInnppuutt ooffffsseett ccuurrrreenntt ppAA Full range 150 150 25°C 1 60 1 60 IIIIBB IInnppuutt bbiiaass ccuurrrreenntt ppAA Full range 150 150 0 –0.25 0 –0.25 25°C to to to to Common-mode input 2.5 2.75 2.5 2.75 VVIICCRR ||VVIIOO|| ≤≤ 55 mmVV, RRSS == 5500 ΩΩ VV voltage range 0 0 Full range to to 2.2 2.2 IOH = –100 µA 25°C 2.97 2.97 HHiighh-llevell outtputt VOH 25°C 2.75 2.75 V vvoollttaaggee IIOOHH == –550000 µµAA Full range 2.5 2.5 VIC = 0, IOL = 100 µA 25°C 0.05 0.05 LLow-llevell outtputt VOL 25°C 0.2 0.2 V vvoollttaaggee VVIICC == 00, IIOOLL == 225500 µµAA Full range 0.5 0.5 25°C 6 10 6 10 AVVDD LLdaaiffrreggreee-nsstiiiggannl aavlloltage VVVVIOOC === 1122 .VV55 ttVVoo, 22 VV RRL = 1100 kkΩΩ‡‡ Full range 3 3 V/mV amplification RL = 1 MΩ‡ 25°C 700 700 Differential input ri(d) resistance 25°C 1012 1012 Ω Common-mode input ri(c) resistance 25°C 1012 1012 Ω Common-mode input ci(c) capacitance f = 10 kHz 25°C 8 8 pF Closed-loop output zo impedance f = 100 kHz, AV = 10 25°C 130 130 Ω CCMMRRRR Common-mode VIICC = 0 to 2.5 V,, VOO = 1.5 V,, 25°C 70 83 70 83 ddBB rejection ratio RS = 50Ω Full range 70 70 Supply-voltage 25°C 80 95 80 95 kkSSVVRR rreejjeeccttiioonn rraattiioo VDDDD = 2.7 V to 8 V,, ddBB (∆VDD/∆VIO) VIC = VDD/2, No load Full range 80 80 25°C 100 150 100 150 IIDDDD SSuuppppllyy ccuurrrreenntt VVOO == 11.55 VV, NNoo llooaadd µµAA Full range 175 175 †Full range is – 40°C to 85°C. ‡Referenced to 2.5 V NOTE 4: Typical values are based on the input offset voltage shift observed through 500 hours of operating life test at TA = 150°C extrapolated to TA = 25°C using the Arrhenius equation and assuming an activation energy of 0.96 eV. 6 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265

TLV2422, TLV2422A Advanced LinCMOS RAIL-TO-RAIL OUTPUT WIDE-INPUT-VOLTAGE MICROPOWER DUAL OPERATIONAL AMPLIFIERS SLOS199C – SEPTEMBER1997 – REVISED APRIL 2001 operating characteristics at specified free-air temperature, V = 3 V DD TLV2422C, TLV2422I PARAMETER TEST CONDITIONS TAA† TLV2422AI UNIT MIN TYP MAX 25°C 0.01 0.02 SR Slew rate at unity gain VVCOL == 1110.550 VVpF tto‡ 33.55 VV, RRL = 1100 kkΩΩ‡‡, Full 0.008 V/µs range f = 10 Hz 25°C 100 VVn EEqquuiivvaalleenntt iinnppuutt nnooiissee vvoollttaaggee nnVV//√√HHzz f = 1 kHz 25°C 23 f = 0.1 Hz to 1 Hz 25°C 2.7 VVNN((PPPP)) PPeeaakk-ttoo-ppeeaakk eeqquuiivvaalleenntt iinnppuutt nnooiissee vvoollttaaggee µµVV f = 0.1 Hz to 10 Hz 25°C 4 In Equivalent input noise current 25°C 0.6 fA√Hz VO = 0.5 V to 2.5 V, AV = 1 0.25% TTHHDD ++ NN TToottaall hhaarrmmoonniicc ddiissttoorrttiioonn pplluuss nnooiissee ff = 11 kkHHzz, 2255°°CC RL = 10 kΩ‡ AV = 10 1.8% Gain-bandwidth product fC =L 1=0 1 0k0H zp,F ‡ RL = 10 kΩ‡, 25°C 46 kHz BOM Maximum output-swing bandwidth VROL (=P 1P0) =kΩ 1‡ V,, ACVL == 11,0 0 pF‡ 25°C 8.3 kHz AAVV == –11,, TToo 00.11%% 88.66 tts SSeettttlliinngg ttiimmee SRtLLe p= =1 00 .k5Ω V‡ ,to 2.5 V,, 2255°°CC µµss CL = 100 pF‡‡ TToo 00.0011%% 1166 φm Phase margin at unity gain RRLL == 1100 kkΩΩ‡‡, CCLL == 110000 ppFF‡‡ 25°C 62° Gain margin 25°C 11 dB †Full range for the C version is 0°C to 70°C. Full range for the I version is –40°C to 85°C. ‡Referenced to 2.5 V POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 7

TLV2422, TLV2422A Advanced LinCMOS RAIL-TO-RAIL OUTPUT WIDE-INPUT-VOLTAGE MICROPOWER DUAL OPERATIONAL AMPLIFIERS SLOS199C – SEPTEMBER1997 – REVISED APRIL 2001 electrical characteristics at specified free-air temperature, V = 3 V (unless otherwise noted) DD TLV2422Q, TLV2422AQ, PARAMETER TEST CONDITIONS TAA† TLV2422M TLV2422AM UNIT MIN TYP MAX MIN TYP MAX 25°C 300 2000 300 950 VVIIOO IInnppuutt ooffffsseett vvoollttaaggee µµVV Full range 2500 1800 Temperature ααVVIIOO ccooeeffffiicciieenntt ooff iinnppuutt FFuullll rraannggee 22 22 µµVV//°°CC offset voltage Input offset voltage VIC = 0, VDD± = ±1.5 V, long-term drift (see VO = 0, RS = 50 Ω 25°C 0.003 0.003 µV/mo Note 4) 25°C 0.5 60 0.5 60 IIIIOO IInnppuutt ooffffsseett ccuurrrreenntt ppAA Full range 150 150 25°C 1 60 1 60 IIIIBB IInnppuutt bbiiaass ccuurrrreenntt ppAA Full range 300 300 0 –0.25 0 –0.25 25°C to to to to Common-mode input 2.5 2.75 2.5 2.75 VVIICCRR ||VVIIOO|| ≤≤ 55 mmVV, RRSS == 5500 ΩΩ VV voltage range 0 0 Full range to to 2.2 2.2 IOH = –100 µA 25°C 2.97 2.97 HHiighh-llevell outtputt VOH 25°C 2.75 2.75 V vvoollttaaggee IIOOHH == –550000 µµAA Full range 2.5 2.5 VIC = 0, IOL = 100 µA 25°C 0.05 0.05 LLow-llevell outtputt VOL 25°C 0.2 0.2 V vvoollttaaggee VVIICC == 00, IIOOLL == 225500 µµAA Full range 0.5 0.5 25°C 6 10 6 10 AVVDD LLdaaiffrreggreee-nsstiiiggannl aavlloltage VVVVIOOC === 1111 .VV55 ttVVoo, 22 VV RRL = 1100 kkΩΩ‡‡ Full range 2 2 V/mV amplification RL = 1 MΩ‡ 25°C 700 700 Differential input ri(d) resistance 25°C 1012 1012 Ω Common-mode input ri(c) resistance 25°C 1012 1012 Ω Common-mode input ci(c) capacitance f = 10 kHz 25°C 8 8 pF Closed-loop output zo impedance f = 100 kHz, AV = 10 25°C 130 130 Ω CCMMRRRR Common-mode VIICC = VIICCRR min,, VOO = 1.5 V,, 25°C 70 83 70 83 ddBB rejection ratio RS = 50Ω Full range 70 70 Supply-voltage 25°C 80 95 80 95 kkSSVVRR rreejjeeccttiioonn rraattiioo VDDDD = 2.7 V to 8 V,, ddBB (∆VDD/∆VIO) VIC = VDD/2, No load Full range 80 80 25°C 100 150 100 150 IIDDDD SSuuppppllyy ccuurrrreenntt VVOO == 11.55 VV, NNoo llooaadd µµAA Full range 175 175 †Full range is –40°C to 125°C for Q level part, –55°C to 125°C for M level part. ‡Referenced to 1.5 V NOTE 4: Typical values are based on the input offset voltage shift observed through 500 hours of operating life test at TA = 150°C extrapolated to TA = 25°C using the Arrhenius equation and assuming an activation energy of 0.96 eV. 8 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265

TLV2422, TLV2422A Advanced LinCMOS RAIL-TO-RAIL OUTPUT WIDE-INPUT-VOLTAGE MICROPOWER DUAL OPERATIONAL AMPLIFIERS SLOS199C – SEPTEMBER1997 – REVISED APRIL 2001 operating characteristics at specified free-air temperature, V = 3 V DD TLV2422Q, TLV2422M, PARAMETER TEST CONDITIONS TA† TLV2422AQ, UNIT TLV2422AM MIN TYP MAX 25°C 0.01 0.02 SR Slew rate at unity gain VVCOL == 1110.110 VVpF tto‡ 11.99 VV, RRL = 1100 kkΩΩ‡‡, Full 0.008 V/µs range f = 10 Hz 25°C 100 VVn EEqquuiivvaalleenntt iinnppuutt nnooiissee vvoollttaaggee nnVV//√√HHzz f = 1 kHz 25°C 23 f = 0.1 Hz to 1 Hz 25°C 2.7 VVNN((PPPP)) PPeeaakk-ttoo-ppeeaakk eeqquuiivvaalleenntt iinnppuutt nnooiissee vvoollttaaggee µµVV f = 0.1 Hz to 10 Hz 25°C 4 In Equivalent input noise current 25°C 0.6 fA√Hz VO = 0.5 V to 2.5 V, AV = 1 0.25% TTHHDD ++ NN TToottaall hhaarrmmoonniicc ddiissttoorrttiioonn pplluuss nnooiissee ff = 11 kkHHzz, 2255°°CC RL = 10 kΩ‡ AV = 10 1.8% Gain-bandwidth product fC =L 1=0 1 0k0H zp,F ‡ RL = 10 kΩ‡, 25°C 46 kHz BOM Maximum output-swing bandwidth VROL (=P 1P0) =kΩ 1‡ V,, ACVL == 11,0 0 pF‡ 25°C 8.3 kHz AAVV == –11,, TToo 00.11%% 88.66 tts SSeettttlliinngg ttiimmee SRtLLe p= =1 00 .k5Ω V‡ ,to 2.5 V,, 2255°°CC µµss CL = 100 pF‡‡ TToo 00.0011%% 1166 φm Phase margin at unity gain RRLL == 1100 kkΩΩ‡‡, CCLL == 110000 ppFF‡‡ 25°C 62° Gain margin 25°C 11 dB †Full range is –40°C to 125°C for Q level part, –55°C to 125°C for M level part. ‡Referenced to 1.5 V POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 9

TLV2422, TLV2422A Advanced LinCMOS RAIL-TO-RAIL OUTPUT WIDE-INPUT-VOLTAGE MICROPOWER DUAL OPERATIONAL AMPLIFIERS SLOS199C – SEPTEMBER1997 – REVISED APRIL 2001 electrical characteristics at specified free-air temperature, V = 5 V (unless otherwise noted) DD TLV2422C PPAARRAAMMEETTEERR TTEESSTT CCOONNDDIITTIIOONNSS TTA†† UUNNIITT MIN TYP MAX 25°C 300 2000 VVIIOO IInnppuutt ooffffsseett vvoollttaaggee µµVV Full range 2500 25°C ααVVIIOO TTeemmppeerraattuurree ccooeeffffiicciieenntt ooff iinnppuutt ooffffsseett vvoollttaaggee to 70°C 22 µµVV//°°CC Input offset voltage long-term drift (see Note 4) VIC = 0, VDD± = ±2.5 V, 25°C 0.003 µV/mo VVOO == 00, RRSS == 5500 ΩΩ 25°C 0.5 60 IIIIOO IInnppuutt ooffffsseett ccuurrrreenntt ppAA Full range 150 25°C 1 60 IIIIBB IInnppuutt bbiiaass ccuurrrreenntt ppAA Full range 150 0 –0.25 25°C to to 4.5 4.75 VVIICCRR CCoommmmoonn-mmooddee iinnppuutt vvoollttaaggee rraannggee ||VVIIOO|| ≤≤ 55 mmVV, RRSS == 5500 ΩΩ VV 0 Full range to 4.2 IOH = –100 µA 25°C 4.97 VOH High-level output voltage 25°C 4.5 4.75 V IIOOHH == –11 mmAA Full range 4.25 VIC = 2.5 V, IOL = 100 µA 25°C 0.04 VOL Low-level output voltage 25°C 0.15 V VVIICC == 22.55 VV, IIOOLL == 550000 µµAA Full range 0.5 25°C 8 12 AVVDD Largge-siggnal differential voltagge amplification VVVVIOOC === 1122 .VV55 ttVVoo, 44 VV RRL = 1100 kkΩΩ‡‡ Full range 5 V/mV RL = 1 MΩ‡ 25°C 1000 ri(d) Differential input resistance 25°C 1012 Ω ri(c) Common-mode input resistance 25°C 1012 Ω ci(c) Common-mode input capacitance f = 10 kHz 25°C 8 pF zo Closed-loop output impedance f = 100 kHz, AV = 10 25°C 130 Ω CCMMRRRR CCoommmmoonn-mmooddee rreejjeeccttiioonn rraattiioo VIICC = 0 to 4.5 V,, VOO = 2.5 V,, 25°C 70 90 ddBB RS = 50Ω Full range 70 kkSSVVRR SSuuppppllyy-vvoollttaaggee rreejjeeccttiioonn rraattiioo ((∆∆VVDDDD//∆∆VVIIOO)) VDDDD = 4.4 V to 8 V,, 25°C 80 95 ddBB VIC = VDD/2, No load Full range 80 25°C 100 150 IIDDDD SSuuppppllyy ccuurrrreenntt VVOO == 22.55 VV, NNoo llooaadd µµAA Full range 175 †Full range is 0°C to 70°C. ‡Referenced to 2.5 V NOTE 4: Typical values are based on the input offset voltage shift observed through 500 hours of operating life test at TA = 150°C extrapolated to TA = 25°C using the Arrhenius equation and assuming an activation energy of 0.96 eV. 10 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265

TLV2422, TLV2422A Advanced LinCMOS RAIL-TO-RAIL OUTPUT WIDE-INPUT-VOLTAGE MICROPOWER DUAL OPERATIONAL AMPLIFIERS SLOS199C – SEPTEMBER1997 – REVISED APRIL 2001 electrical characteristics at specified free-air temperature, V = 5 V (unless otherwise noted) DD TLV2422I TLV2422AI PPAARRAAMMEETTEERR TTEESSTT CCOONNDDIITTIIOONNSS TTA†† UUNNIITT MIN TYP MAX MIN TYP MAX 25°C 300 2000 300 950 VVIIOO IInnppuutt ooffffsseett vvoollttaaggee µµVV Full range 2500 1500 Temperature 25°C ααVVIIOO ccooeeffffiicciieenntt ooff iinnppuutt to 70°C 22 22 µµVV//°°CC offset voltage Input offset voltage VIC = 0, VDD± = ±2.5 V, long-term drift (see VO = 0, RS = 50 Ω 25°C 0.003 0.003 µV/mo Note 4) 25°C 0.5 60 0.5 60 IIIIOO IInnppuutt ooffffsseett ccuurrrreenntt ppAA Full range 150 150 25°C 1 60 1 60 IIIIBB IInnppuutt bbiiaass ccuurrrreenntt ppAA Full range 150 150 0 –0.25 0 –0.25 25°C to to to to Common-mode input 4.5 4.75 4.5 4.75 VVIICCRR ||VVIIOO|| ≤≤ 55 mmVV, RRSS == 5500 ΩΩ VV voltage range 0 0 Full range to to 4.2 4.2 IOH = –100 µA 25°C 4.97 4.97 HHiighh-llevell outtputt VOH 25°C 4.5 4.75 4.5 4.75 V vvoollttaaggee IIOOHH == –11 mmAA Full range 4.25 4.25 VIC = 2.5 V, IOL = 100 µA 25°C 0.04 0.04 LLow-llevell outtputt VOL 25°C 0.15 0.15 V vvoollttaaggee VVIICC == 22.55 VV, IIOOLL == 550000 µµAA Full range 0.5 0.5 25°C 8 12 8 12 AVVDD LLdaaiffrreggreee-nsstiiiggannl aavlloltage VVVVOOIC === 1122 .VV55 ttVVoo, 44 VV RRL = 1100 kkΩΩ‡‡ Full range 5 5 V/mV amplification RL = 1 MΩ‡ 25°C 1000 1000 Differential input ri(d) resistance 25°C 1012 1012 Ω Common-mode input ri(c) resistance 25°C 1012 1012 Ω Common-mode input ci(c) capacitance f = 10 kHz 25°C 8 8 pF Closed-loop output zo impedance f = 100 kHz, AV = 10 25°C 130 130 Ω CCMMRRRR Common-mode VIICC = 0 to 4.5 V,, VOO = 2.5 V,, 25°C 70 90 70 90 ddBB rejection ratio RS = 50Ω Full range 70 70 Supply-voltage 25°C 80 95 80 95 kkSSVVRR rreejjeeccttiioonn rraattiioo VDDDD = 4.4 V to 8 V,, ddBB (∆VDD/∆VIO) VIC = VDD/2, No load Full range 80 80 25°C 100 150 100 150 IIDDDD SSuuppppllyy ccuurrrreenntt VVOO == 22.55 VV, NNoo llooaadd µµAA Full range 175 175 †Full range is – 40°C to 85°C. ‡Referenced to 2.5 V NOTE 4: Typical values are based on the input offset voltage shift observed through 500 hours of operating life test at TA = 150°C extrapolated to TA = 25°C using the Arrhenius equation and assuming an activation energy of 0.96 eV. POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 11

TLV2422, TLV2422A Advanced LinCMOS RAIL-TO-RAIL OUTPUT WIDE-INPUT-VOLTAGE MICROPOWER DUAL OPERATIONAL AMPLIFIERS SLOS199C – SEPTEMBER1997 – REVISED APRIL 2001 operating characteristics at specified free-air temperature, V = 5 V DD TLV2422C, TLV2422I PARAMETER TEST CONDITIONS TAA† TLV2422AI UNIT MIN TYP MAX 25°C 0.01 0.02 SR Slew rate at unity gain VVCCOOLL === 111100.5500 VVpFF ttoo‡‡ 33.55 VV, RRLL = 1100 kkΩΩ‡‡, Full 00.000088 V/µs range f = 10 Hz 25°C 100 VVn EEqquuiivvaalleenntt iinnppuutt nnooiissee vvoollttaaggee nnVV//√√HHzz f = 1 kHz 25°C 18 f = 0.1 Hz to 1 Hz 25°C 1.9 VVNN((PPPP)) PPeeaakk-ttoo-ppeeaakk eeqquuiivvaalleenntt iinnppuutt nnooiissee vvoollttaaggee µµVV f = 0.1 Hz to 10 Hz 25°C 2.8 In Equivalent input noise current 25°C 0.6 fA√Hz VO = 1.5 V to 3.5 V, AV = 1 0.24% TTHHDD ++ NN TToottaall hhaarrmmoonniicc ddiissttoorrttiioonn pplluuss nnooiissee ff = 11 kkHHzz, 2255°°CC RL = 10 kΩ‡ AV = 10 1.7% Gain-bandwidth product fC =L 1=0 1 0k0H zp,F ‡ RL =10 kΩ‡, 25°C 52 kHz BOM Maximum output-swing bandwidth RVOL (=P 1P0) =kΩ 2‡ V,, ACVL == 11,0 0 pF‡ 25°C 5.3 kHz AAVV == –11,, TToo 00.11%% 88.55 tts SSeettttlliinngg ttiimmee SRtLLe p= =1 01 .k5Ω V‡ ,to 3.5 V,, 2255°°CC µµss CL = 100 pF‡‡ TToo 00.0011%% 1155.55 φm Phase margin at unity gain RRLL == 1100 kkΩΩ‡‡, CCLL == 110000 ppFF‡‡ 25°C 66° Gain margin 25°C 11 dB †Full range for the C version is 0°C to 70°C. Full range for the I version is –40°C to 85°C. ‡Referenced to 2.5 V 12 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265

TLV2422, TLV2422A Advanced LinCMOS RAIL-TO-RAIL OUTPUT WIDE-INPUT-VOLTAGE MICROPOWER DUAL OPERATIONAL AMPLIFIERS SLOS199C – SEPTEMBER1997 – REVISED APRIL 2001 electrical characteristics at specified free-air temperature, V = 5 V (unless otherwise noted) DD TLV2422Q, TLV2422AQ, PARAMETER TEST CONDITIONS TAA† TLV2422M TLV2422AM UNIT MIN TYP MAX MIN TYP MAX 25°C 300 2000 300 950 VVIIOO IInnppuutt ooffffsseett vvoollttaaggee µµVV Full range 2500 1800 Temperature ααVVIIOO ccooeeffffiicciieenntt ooff iinnppuutt FFuullll rraannggee 22 22 µµVV//°°CC offset voltage Input offset voltage VIC = 0, VDD± = ±2.5 V, long-term drift (see VO = 0, RS = 50 Ω 25°C 0.003 0.003 µV/mo Note 4) 25°C 0.5 60 0.5 60 IIIIOO IInnppuutt ooffffsseett ccuurrrreenntt ppAA Full range 150 150 25°C 1 60 1 60 IIIIBB IInnppuutt bbiiaass ccuurrrreenntt ppAA Full range 300 300 0 –0.25 0 –0.25 25°C to to to to Common-mode input 4.5 4.75 4.5 4.75 VVIICCRR ||VVIIOO|| ≤≤ 55 mmVV, RRSS == 5500 ΩΩ VV voltage range 0 0 Full range to to 4.2 4.2 IOH = –100 µA 25°C 4.97 4.97 HHiighh-llevell outtputt VOH 25°C 4.75 4.75 V vvoollttaaggee IIOOHH == –11 mmAA Full range 4.5 4.5 VIC = 2.5 V, IOL = 100 µA 25°C 0.04 0.04 LLow-llevell outtputt VOL 25°C 0.15 0.15 V vvoollttaaggee VVIICC == 22.55 VV, IIOOLL == 550000 µµAA Full range 0.5 0.5 25°C 8 12 8 12 AVVDD LLdaaiffrreggreee-nsstiiiggannl aavlloltage VVVVOOIC === 1122 .VV55 ttVVoo, 44 VV RRL = 1100 kkΩΩ‡‡ Full range 3 3 V/mV amplification RL = 1 MΩ‡ 25°C 1000 1000 Differential input ri(d) resistance 25°C 1012 1012 Ω Common-mode input ri(c) resistance 25°C 1012 1012 Ω Common-mode input ci(c) capacitance f = 10 kHz 25°C 8 8 pF Closed-loop output zo impedance f = 100 kHz, AV = 10 25°C 130 130 Ω CCMMRRRR Common-mode VIICC = VIICCRR min,, VOO = 2.5 V,, 25°C 70 90 70 90 ddBB rejection ratio RS = 50Ω Full range 70 70 Supply-voltage 25°C 80 95 80 95 kkSSVVRR rreejjeeccttiioonn rraattiioo VDDDD = 4.4 V to 8 V,, ddBB (∆VDD/∆VIO) VIC = VDD/2, No load Full range 80 80 25°C 100 150 100 150 IIDDDD SSuuppppllyy ccuurrrreenntt VVOO == 22.55 VV, NNoo llooaadd µµAA Full range 175 175 †Full range is –40°C to 125°C for Q level part, –55°C to 125°C for M level part. ‡Referenced to 2.5 V NOTE 4: Typical values are based on the input offset voltage shift observed through 500 hours of operating life test at TA = 150°C extrapolated to TA = 25°C using the Arrhenius equation and assuming an activation energy of 0.96 eV. POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 13

TLV2422, TLV2422A Advanced LinCMOS RAIL-TO-RAIL OUTPUT WIDE-INPUT-VOLTAGE MICROPOWER DUAL OPERATIONAL AMPLIFIERS SLOS199C – SEPTEMBER1997 – REVISED APRIL 2001 operating characteristics at specified free-air temperature, V = 5 V DD TLV2422Q, TLV2422M, PARAMETER TEST CONDITIONS TA† TLV2422AQ, UNIT TLV2422AM MIN TYP MAX 25°C 0.01 0.02 SR Slew rate at unity gain VVCCOOLL === 111100.5500 VVpFF ttoo‡‡ 33.55 VV, RRLL = 1100 kkΩΩ‡‡, Full 00.000088 V/µs range f = 10 Hz 25°C 100 VVn EEqquuiivvaalleenntt iinnppuutt nnooiissee vvoollttaaggee nnVV//√√HHzz f = 1 kHz 25°C 18 f = 0.1 Hz to 1 Hz 25°C 1.9 VVNN((PPPP)) PPeeaakk-ttoo-ppeeaakk eeqquuiivvaalleenntt iinnppuutt nnooiissee vvoollttaaggee µµVV f = 0.1 Hz to 10 Hz 25°C 2.8 In Equivalent input noise current 25°C 0.6 fA√Hz VO = 1.5 V to 3.5 V, AV = 1 0.24% TTHHDD ++ NN TToottaall hhaarrmmoonniicc ddiissttoorrttiioonn pplluuss nnooiissee ff = 11 kkHHzz, 2255°°CC RL = 10 kΩ‡ AV = 10 1.7% Gain-bandwidth product fC =L 1=0 1 0k0H zp,F ‡ RL =10 kΩ‡, 25°C 52 kHz BOM Maximum output-swing bandwidth RVOL (=P 1P0) =kΩ 2‡ V,, ACVL == 11,0 0 pF‡ 25°C 5.3 kHz AAVV == –11,, TToo 00.11%% 88.55 tts SSeettttlliinngg ttiimmee SRtLLe p= =1 01 .k5Ω V‡ ,to 3.5 V,, 2255°°CC µµss CL = 100 pF‡‡ TToo 00.0011%% 1155.55 φm Phase margin at unity gain RRLL == 1100 kkΩΩ‡‡, CCLL == 110000 ppFF‡‡ 25°C 66° Gain margin 25°C 11 dB †Full range is –40°C to 125°C for Q level part, –55°C to 125°C for M level part. ‡Referenced to 2.5 V 14 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265

TLV2422, TLV2422A Advanced LinCMOS RAIL-TO-RAIL OUTPUT WIDE-INPUT-VOLTAGE MICROPOWER DUAL OPERATIONAL AMPLIFIERS SLOS199C – SEPTEMBER1997 – REVISED APRIL 2001 TYPICAL CHARACTERISTICS Table of Graphs FIGURE Distribution 2,,3 VVIIOO IInnppuutt ooffffsseett vvoollttaaggee vs Common-mode input voltage 4,5 αVIO Input offset voltage temperature coefficient Distribution 6,7 IIB/IIO Input bias and input offset currents vs Free-air temperature 8 VOH High-level output voltage vs High-level output current 9,11 VOL Low-level output voltage vs Low-level output current 10,12 VO(PP) Maximum peak-to-peak output voltage vs Frequency 13 vs Supplyy voltagge 14 IIOOSS SShhoorrtt-cciirrccuuiitt oouuttppuutt ccuurrrreenntt vs Free-air temperature 15 VID Differential input voltage vs Output voltage 16,17 Differential gain vs Load resistance 18 Large-signal differential voltage amplification vs Freqquencyy 19,,20 AAVVDD Differential voltage amplification vs Free-air temperature 21,22 zo Output impedance vs Frequency 23,24 vs Freqquencyy 25 CCMMRRRR CCoommmmoonn-mmooddee rreejjeeccttiioonn rraattiioo vs Free-air temperature 26 vs Freqquencyy 27,,28 kkSSVVRR SSuuppppllyy-vvoollttaaggee rreejjeeccttiioonn rraattiioo vs Free-air temperature 29 IDD Supply current vs Supply voltage 30 vs Load capacitance 31 SSRR SSlleeww rraattee vs Free-air temperature 32 VO Inverting large-signal pulse response 33,34 VO Voltage-follower large-signal pulse response 35,36 VO Inverting small-signal pulse response 37,38 VO Voltage-follower small-signal pulse response 39,40 Vn Equivalent input noise voltage vs Frequency 41, 42 Noise voltage (referred to input) Over a 10-second period 43 THD + N Total harmonic distortion plus noise vs Frequency 44,45 vs Supplyy voltagge 46 GGaaiinn-bbaannddwwiiddtthh pprroodduucctt vs Free-air temperature 47 vs Freqquencyy 19,,20 φφm PPhhaassee mmaarrggiinn vs Load capacitance 48 Gain margin vs Load capacitance 49 B1 Unity-gain bandwidth vs Load capacitance 50 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 15

TLV2422, TLV2422A Advanced LinCMOS RAIL-TO-RAIL OUTPUT WIDE-INPUT-VOLTAGE MICROPOWER DUAL OPERATIONAL AMPLIFIERS SLOS199C – SEPTEMBER1997 – REVISED APRIL 2001 TYPICAL CHARACTERISTICS DISTRIBUTION OF TLV2422 DISTRIBUTION OF TLV2422 INPUT OFFSET VOLTAGE INPUT OFFSET VOLTAGE 18 20 452 Amplifiers from 1 Wafer Lot 454 Amplifiers from 1 Wafer Lot 16 VDD = 3 V VDD = 5 V RL = 10 kΩ RL = 10 kΩ 14 TA = 25°C TA = 25°C % % 15 – – rs 12 rs e e plifi 10 plifi m m A A 10 of 8 of e e g g a a nt 6 nt e e c c r r 5 Pe 4 Pe 2 0 0 –0.4–0.3–0.2–0.1 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 –0.4–0.3–0.2–0.1 0 0.1 0.2 0.3 0.4 0.5 0.6 VIO – Input Offset Voltage – mV VIO – Input Offset Voltage – mV Figure 2 Figure 3 INPUT OFFSET VOLTAGE INPUT OFFSET VOLTAGE vs vs COMMON-MODE INPUT VOLTAGE COMMON-MODE INPUT VOLTAGE 2 2 VDD = 3 V VDD = 5 V 1.5 1.5 V m 1 mV 1 age – 0.5 ge – 0.5 Volt olta set 0 et V 0 put Off –0.5 ut Offs –0.5 n p – I –1 – In –1 O VI VIO –1.5 –1.5 –2 –2 –0.5 0 0.5 1 1.5 2 2.5 3 –0.5 0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 5 VIC – Common-Mode Input Voltage – V VIC – Common-Mode Input Voltage – V Figure 4 Figure 5 16 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265

TLV2422, TLV2422A Advanced LinCMOS RAIL-TO-RAIL OUTPUT WIDE-INPUT-VOLTAGE MICROPOWER DUAL OPERATIONAL AMPLIFIERS SLOS199C – SEPTEMBER1997 – REVISED APRIL 2001 TYPICAL CHARACTERISTICS DISTRIBUTION OF TLV2422 INPUT OFFSET DISTRIBUTION OF TLV2422 INPUT OFFSET VOLTAGE TEMPERATURE COEFFICIENT VOLTAGE TEMPERATURE COEFFICIENT 25 25 32 Amplifiers From 1 Wafer Lot 32 Amplifiers From 1 Wafer Lot VDD = ± 1.5 V VDD = ± 2.5 V TA = 25°C to 125°C TA = 25°C to 125°C 20 20 % % mplifiers – 15 mplifiers – 15 Percentage of A 150 Percentage of A 150 0 0 –4 –3 –2 –1 0 1 2 3 4 –4 –3 –2 –1 0 1 2 3 4 αVIO – Temperature Coefficient – µV/°C αVIO – Temperature Coefficient – µV/°C Figure 6 Figure 7 INPUT BIAS AND INPUT OFFSET CURRENTS HIGH-LEVEL OUTPUT VOLTAGE vs vs FREE-AIR TEMPERATURE HIGH-LEVEL OUTPUT CURRENT A p 200 3 – s VDD = ±2.5 V VDD = 3 V nt e et Curr 160 ge – V 2.5 TA = 85°C s a Off olt 2 put 120 ut V TA = 0°C n p as and I 80 IIB evel Out 1.5 TA = 125°C ut Bi gh-L 1 TA = 25°C np Hi – I 40 – H O O 0.5 I V dI IIO n a 0 0 B I –55 –40 0 25 70 85 125 0 3 6 9 12 15 I TA – Free-Air Temperature – °C IOH – High-Level Output Current – mA Figure 8 Figure 9 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 17

TLV2422, TLV2422A Advanced LinCMOS RAIL-TO-RAIL OUTPUT WIDE-INPUT-VOLTAGE MICROPOWER DUAL OPERATIONAL AMPLIFIERS SLOS199C – SEPTEMBER1997 – REVISED APRIL 2001 TYPICAL CHARACTERISTICS LOW-LEVEL OUTPUT VOLTAGE HIGH-LEVEL OUTPUT VOLTAGE vs vs LOW-LEVEL OUTPUT CURRENT HIGH-LEVEL OUTPUT CURRENT 1.6 5 VDD = 3 V VDD = 5 V 1.4 Output Voltage – V 10..281 TA = 8T5A°C = 125°C Output Voltage – V 43 TA =T –A4 0=° 2C5°C w-Level 0.6 gh-Level 2 TA = 85°C Lo 0.4 Hi – L TA = 25°C – H 1 O O V 0.2 V TA = 125°C TA = –40°C 0 0 0 1 2 3 4 5 0 4 8 12 16 20 24 28 32 36 40 IOL – Low-Level Output Current – mA IOH – High-Level Output Current – mA Figure 10 Figure 11 LOW-LEVEL OUTPUT VOLTAGE MAXIMUM PEAK-TO-PEAK OUTPUT VOLTAGE vs vs LOW-LEVEL OUTPUT CURRENT FREQUENCY 1.2 V 5 VDD = 5 V ge – VDD = 5 V TRAL == 2150° kCΩ a ge – V 1 TA = 125°C ut Volt 4 a p olt 0.8 ut V O Output 0.6 TA = 85°C o-Peak 3 VDD = 3 V gh-Level 0.4 m Peak-t 2 Hi mu – OH 0.2 TA = 25°C Maxi 1 V – TA = –40°C P) P 0 O( 0 0 1 2 3 4 5 V 102 103 104 105 106 IOL – Low-Level Output Current – mA f – Frequency – Hz Figure 12 Figure 13 18 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265

TLV2422, TLV2422A Advanced LinCMOS RAIL-TO-RAIL OUTPUT WIDE-INPUT-VOLTAGE MICROPOWER DUAL OPERATIONAL AMPLIFIERS SLOS199C – SEPTEMBER1997 – REVISED APRIL 2001 TYPICAL CHARACTERISTICS SHORT-CIRCUIT OUTPUT CURRENT SHORT-CIRCUIT OUTPUT CURRENT vs vs SUPPLY VOLTAGE FREE-AIR TEMPERATURE 30 8 25 VO = VDD/2 VID = –100 mV A VIC = VDD/2 A 6 m 20 TA = 25°C m – – nt 15 nt 4 e e r r ur 10 ur C C 2 ut 5 ut p p Out 0 Out 0 VDD = 5 V uit –5 uit rc rc –2 Ci –10 Ci rt- rt- o –15 o –4 h h S S – –20 – S S –6 O O I –25 I VID = 100 mV –30 –8 2 3 4 5 6 7 8 9 10 –55 –40 0 25 70 85 125 VDD – Supply Voltage – V TA – Free-Air Temperature – °C Figure 14 Figure 15 DIFFERENTIAL INPUT VOLTAGE DIFFERENTIAL INPUT VOLTAGE vs vs OUTPUT VOLTAGE OUTPUT VOLTAGE 1000 1000 VDD = 3 V VDD = 5 V 800 RL = 10 kΩ 800 RL = 10 kΩ µ– V 600 TA = 25°C µ– V 600 TA = 25°C e e ag 400 ag 400 olt olt ut V 200 ut V 200 p p al In 0 al In 0 enti –200 enti –200 er er Diff –400 Diff –400 – – D –600 D –600 VI VI –800 –800 –1000 –1000 0 0.5 1 1.5 2 2.5 3 0 1 2 3 4 5 VO – Output Voltage – V VO – Output Voltage – V Figure 16 Figure 17 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 19

TLV2422, TLV2422A Advanced LinCMOS RAIL-TO-RAIL OUTPUT WIDE-INPUT-VOLTAGE MICROPOWER DUAL OPERATIONAL AMPLIFIERS SLOS199C – SEPTEMBER1997 – REVISED APRIL 2001 TYPICAL CHARACTERISTICS DIFFERENTIAL GAIN vs LOAD RESISTANCE 10000 1000 V m V/ – VID = 5 V n Gai 100 VID = 3 V al nti e r e Diff 10 1 10 100 1000 RL – Load Resistance – kΩ Figure 18 LARGE-SIGNAL DIFFERENTIAL VOLTAGE AMPLIFICATION AND PHASE MARGIN vs FREQUENCY 50 180 VDD = 3 V 40 RL = 10 kΩ CL = 100 pF 135 30 al e-Signal DifferentiAmplification – dB –2110000 GAIN PHASE 4950 °– Phase Margin – Largage –20 0 φm – olt VDV –30 A –45 –40 –50 –90 103 104 105 106 f – Frequency – Hz Figure 19 20 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265

TLV2422, TLV2422A Advanced LinCMOS RAIL-TO-RAIL OUTPUT WIDE-INPUT-VOLTAGE MICROPOWER DUAL OPERATIONAL AMPLIFIERS SLOS199C – SEPTEMBER1997 – REVISED APRIL 2001 TYPICAL CHARACTERISTICS LARGE-SIGNAL DIFFERENTIAL VOLTAGE AMPLIFICATION AND PHASE MARGIN vs FREQUENCY 60 180 VDD = 5 V 50 RL = 10 kΩ CL = 100 pF 135 40 e-Signal DifferentialAmplification – dB 3120000 PHASE 4950 °– Phase Margin – Largage –10 GAIN 0 φm – olt VDV –20 A –45 –30 –40 –90 103 104 105 106 f – Frequency – Hz Figure 20 DIFFERENTIAL VOLTAGE AMPLIFICATION DIFFERENTIAL VOLTAGE AMPLIFICATION vs vs FREE-AIR TEMPERATURE FREE-AIR TEMPERATURE 10000 10000 V VDD = 3 V V VDD = 5 V m m V/ V/ mplication – 1000 RL = 1 MΩ mplication – 1000 RL = 1 MΩ A A Voltage 100 Voltage 100 Differential 10 RL = 10 kΩ Differential 10 RL = 10 kΩ – – D D AV AV 1 1 –75 –50 –25 0 25 50 75 100 125 –75 –50 –25 0 25 50 75 100 125 TA – Free-Air Temperature – °C TA – Free-Air Temperature – °C Figure 21 Figure 22 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 21

TLV2422, TLV2422A Advanced LinCMOS RAIL-TO-RAIL OUTPUT WIDE-INPUT-VOLTAGE MICROPOWER DUAL OPERATIONAL AMPLIFIERS SLOS199C – SEPTEMBER1997 – REVISED APRIL 2001 TYPICAL CHARACTERISTICS OUTPUT IMPEDANCE OUTPUT IMPEDANCE vs vs FREQUENCY FREQUENCY 1000 1000 AV = 100 AV = 100 Ω AV = 10 Ω mpedance – 100 AV = 1 mpedance – 100 AV = 10AV = 1 – Output I 10 – Output I 10 o o z z VDD = 3 V VDD = 5 V TA = 25°C TA = 25°C 1 1 102 103 104 105 102 103 104 105 f – Frequency – Hz f – Frequency – Hz Figure 23 Figure 24 COMMON-MODE REJECTION RATIO COMMON-MODE REJECTION RATIO vs vs FREQUENCY FREE-AIR TEMPERATURE 100 94 B TA = 25°C B Ratio – d 80 Ratio – d 9923 Mode Rejection 60 VDD = 5 V Mode Rejection 899910 VVDDDD == 53 VV mon- 40 VDD = 3 V mon- 88 Com Com 87 R – 20 R – 86 R R CM CM 85 0102 103 104 105 106 84–55 –40 0 25 70 85 125 f – Frequency – Hz TA – Free-Air Temperature – °C Figure 25 Figure 26 22 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265

TLV2422, TLV2422A Advanced LinCMOS RAIL-TO-RAIL OUTPUT WIDE-INPUT-VOLTAGE MICROPOWER DUAL OPERATIONAL AMPLIFIERS SLOS199C – SEPTEMBER1997 – REVISED APRIL 2001 TYPICAL CHARACTERISTICS SUPPLY-VOLTAGE REJECTION RATIO SUPPLY-VOLTAGE REJECTION RATIO vs vs FREQUENCY FREQUENCY 120 120 Ratio – dB 100 KSVR+ VTAD D= =25 3° CV Ratio – dB 100 VTAD D= =25 5° CV Rejection 80 Rejection 80 KSVR+ Voltage 60 KSVR– Voltage 60 KSVR– Supply- 40 Supply- 40 – R 20 – R 20 V V S S K K 0 0 101 102 103 104 105 106 101 102 103 104 105 106 f – Frequency – Hz f – Frequency – Hz Figure 27 Figure 28 SUPPLY-VOLTAGE REJECTION RATIO SUPPLY CURRENT vs vs FREE-AIR TEMPERATURE SUPPLY VOLTAGE 100 160 B VDD = 2.7 V to 8 V VO = VDD/2 – d 140 No Load TA = –40°C o ati 98 on R µA 120 TA = 25°C ejecti 96 rent – 100 e R Cur TA = 85°C y-Voltag 94 Supply 8600 pl – p D – Su 92 ID 40 R V 20 S k 90 0 –55 –40 0 25 70 85 125 0 1 2 3 4 5 6 7 8 9 10 TA – Free-Air Temperature – °C VDD – Supply Voltage – V Figure 29 Figure 30 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 23

TLV2422, TLV2422A Advanced LinCMOS RAIL-TO-RAIL OUTPUT WIDE-INPUT-VOLTAGE MICROPOWER DUAL OPERATIONAL AMPLIFIERS SLOS199C – SEPTEMBER1997 – REVISED APRIL 2001 TYPICAL CHARACTERISTICS SLEW RATE SLEW RATE vs vs LOAD CAPACITANCE FREE-AIR TEMPERATURE 0.03 30 VDD = 3 V VDD = 5 V 0.025 ATAV == 2–51°C CRLL == 11000 k pΩF 25 AV = 1 s SR– s µ 0.02 m V/ V/ Rate – 0.015 SR+ Rate – 20 w w Sle Sle 15 R – 0.01 R – S S 10 0.005 0102 103 104 105 106 5–55 –40 0 25 70 85 125 CL – Load Capacitance – pF TA – Free-Air Temperature – °C Figure 31 Figure 32 INVERTING LARGE-SIGNAL INVERTING LARGE-SIGNAL PULSE RESPONSE PULSE RESPONSE 2000 4 1500 3 V 1000 V 2 m m ge – 500 ge – 1 ut Volta 0 ut Volta 0 p p Out –500 Out –1 – – VO –1000 VRDL D= =1 03 kVΩ VO –2 VRDL D= =1 05 kVΩ CL = 100 pF CL = 100 pF –1500 AV = –1 –3 AV = –1 TA = 25°C TA = 25°C –2000 –4 –1000 –600 –200 0 200 600 1000 –1000 –600 –200 0 200 600 1000 t – Time – µs t – Time – µs Figure 33 Figure 34 24 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265

TLV2422, TLV2422A Advanced LinCMOS RAIL-TO-RAIL OUTPUT WIDE-INPUT-VOLTAGE MICROPOWER DUAL OPERATIONAL AMPLIFIERS SLOS199C – SEPTEMBER1997 – REVISED APRIL 2001 TYPICAL CHARACTERISTICS VOLTAGE-FOLLOWER LARGE-SIGNAL VOLTAGE-FOLLOWER LARGE-SIGNAL PULSE RESPONSE PULSE RESPONSE 2000 2000 VDD = 3 V 1500 RL = 10 kΩ 1500 CL = 100 pF AV = 1 V 1000 TA = 25°C V 1000 m m ge – 500 ge – 500 ut Volta 0 ut Volta 0 p p Out –500 Out –500 – – VO –1000 VO –1000 VDD = 5 V RL = 10 kΩ CL = 100 pF –1500 –1500 AV = 1 TA = 25°C –2000 –2000 –1000 –600 –200 0 200 600 1000 –1000 –600 –200 0 200 600 1000 t – Time – µs t – Time – µs Figure 35 Figure 36 INVERTING SMALL-SIGNAL INVERTING SMALL-SIGNAL PULSE RESPONSE PULSE RESPONSE 400 400 VDD = 3 V VDD = 5 V 300 RL = 10 kΩ 300 RL = 10 kΩ CL = 100 pF CL = 100 pF AV = –1 AV = –1 mV 200 TA = 25°C mV 200 TA = 25°C ge – 100 ge – 100 ut Volta 0 ut Volta 0 p p Out –100 Out –100 – – O O V –200 V –200 –300 –300 –400 –400 –5 –4 –3 –2 –1 0 1 2 3 4 5 –5 –4 –3 –2 –1 0 1 2 3 4 5 t – Time – µs t – Time – µs Figure 37 Figure 38 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 25

TLV2422, TLV2422A Advanced LinCMOS RAIL-TO-RAIL OUTPUT WIDE-INPUT-VOLTAGE MICROPOWER DUAL OPERATIONAL AMPLIFIERS SLOS199C – SEPTEMBER1997 – REVISED APRIL 2001 TYPICAL CHARACTERISTICS VOLTAGE-FOLLOWER SMALL-SIGNAL VOLTAGE-FOLLOWER SMALL-SIGNAL PULSE RESPONSE PULSE RESPONSE 400 400 VDD = 3 V VDD = 5 V 300 RL = 10 kΩ 300 RL = 10 kΩ CL = 100 pF CL = 100 pF AV = 1 AV = 1 mV 200 TA = 25°C mV 200 TA = 25°C ge – 100 ge – 100 ut Volta 0 ut Volta 0 p p Out –100 Out –100 – – O O V –200 V –200 –300 –300 –400 –400 –5 –4 –3 –2 –1 0 1 2 3 4 5 –5 –4 –3 –2 –1 0 1 2 3 4 5 t – Time – µs t – Time – µs Figure 39 Figure 40 EQUIVALENT INPUT NOISE VOLTAGE EQUIVALENT INPUT NOISE VOLTAGE vs vs FREQUENCY FREQUENCY 120 120 Hz VTAD D= =25 3° CV Hz VTAD D= =25 5° CV V/ 100 V/ 100 Voltage – n 80 Voltage – n 80 Noise 60 Noise 60 Equivalent Input 2400 Equivalent Input 4200 – – Vn Vn 0 0 10 102 103 104 10 102 103 104 f – Frequency – Hz f – Frequency – Hz Figure 41 Figure 42 26 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265

TLV2422, TLV2422A Advanced LinCMOS RAIL-TO-RAIL OUTPUT WIDE-INPUT-VOLTAGE MICROPOWER DUAL OPERATIONAL AMPLIFIERS SLOS199C – SEPTEMBER1997 – REVISED APRIL 2001 TYPICAL CHARACTERISTICS NOISE VOLTAGE OVER A 10-SECOND PERIOD 1000 Over a 10 Second Period VDD = 5 V 800 f = 0.1 Hz to 10 Hz 600 TA = 25°C 400 V n 200 – ge 0 a Volt –200 e ois –400 N –600 –800 –1000 –1200 0 1 2 3 4 5 6 7 8 9 10 t – Time – s Figure 43 TOTAL HARMONIC DISTORTION PLUS NOISE TOTAL HARMONIC DISTORTION PLUS NOISE vs vs FREQUENCY FREQUENCY % 100 % 100 Noise – TVRADL D== =215 03° kCVΩ Noise – TVRADL D== =215 05° kCVΩ Plus 10 Plus 10 monic Distortion 1 AV = 10 monic Distortion 0.11 AV = 10 AV = 1 Har AV = 1 Har N – Total 0.1 N – Total 0.01 D + D + H H T 0.01 T 0.001 101 102 103 104 105 101 102 103 104 105 f – Frequency – Hz f – Frequency – Hz Figure 44 Figure 45 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 27

TLV2422, TLV2422A Advanced LinCMOS RAIL-TO-RAIL OUTPUT WIDE-INPUT-VOLTAGE MICROPOWER DUAL OPERATIONAL AMPLIFIERS SLOS199C – SEPTEMBER1997 – REVISED APRIL 2001 TYPICAL CHARACTERISTICS GAIN-BANDWIDTH PRODUCT GAIN-BANDWIDTH PRODUCT vs vs SUPPLY VOLTAGE FREE-AIR TEMPERATURE 80 80 RL = 10 kΩ VDD = 5 V CL = 100 pF 70 RL = 10 kΩ 70 f = 10 kHz CL = 100 pF Hz TA = 25°C Hz 60 f = 10 kHz width Product – k 5600 width Product – k 5400 Band 40 Band 30 Gain- 30 Gain- 20 10 20 0 3 4 5 6 7 8 –50 –25 0 25 50 75 100 125 VDD – Supply Voltage – V TA – Free-Air Temperature – °C Figure 46 Figure 47 PHASE MARGIN GAIN MARGIN vs vs LOAD CAPACITANCE LOAD CAPACITANCE 120 40 RL = 10 kΩ Rnull = 500 RL = 10 kΩ TA = 25°C TA = 25°C Rnull = 500 100 Rnull = 1000 30 °n – 80 dB Rnull = 1000 gi – ar n Rnull = 200 e M 60 argi 20 s M a h n – Pm 40 Rnull = 200 Gai Rnull = 100 φ 10 Rnull = 100 20 Rnull = 0 Rnull = 0 0 0 10 102 103 104 105 10 102 103 104 105 CL – Load Capacitance – pF CL – Load Capacitance – pF Figure 48 Figure 49 28 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265

TLV2422, TLV2422A Advanced LinCMOS RAIL-TO-RAIL OUTPUT WIDE-INPUT-VOLTAGE MICROPOWER DUAL OPERATIONAL AMPLIFIERS SLOS199C – SEPTEMBER1997 – REVISED APRIL 2001 TYPICAL CHARACTERISTICS UNITY-GAIN BANDWIDTH vs LOAD CAPACITANCE 60 50 z H k – dth 40 wi d n a B 30 n ai G nity- 20 U – 1 B 10 0 10 102 103 104 105 CL – Load Capacitance – pF Figure 50 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 29

PACKAGE OPTION ADDENDUM www.ti.com 6-Feb-2020 PACKAGING INFORMATION Orderable Device Status Package Type Package Pins Package Eco Plan Lead/Ball Finish MSL Peak Temp Op Temp (°C) Device Marking Samples (1) Drawing Qty (2) (6) (3) (4/5) 5962-9751401QHA ACTIVE CFP U 10 1 TBD Call TI N / A for Pkg Type -55 to 125 9751401QHA TLV2422M TLV2422AID ACTIVE SOIC D 8 75 Green (RoHS NIPDAU Level-1-260C-UNLIM -40 to 85 2422AI & no Sb/Br) TLV2422AIDR ACTIVE SOIC D 8 2500 Green (RoHS NIPDAU Level-1-260C-UNLIM -40 to 85 2422AI & no Sb/Br) TLV2422AIPWR ACTIVE TSSOP PW 8 2000 Green (RoHS NIPDAU Level-1-260C-UNLIM -40 to 85 2422AI & no Sb/Br) TLV2422CD ACTIVE SOIC D 8 75 Green (RoHS NIPDAU Level-1-260C-UNLIM 0 to 70 2422C & no Sb/Br) TLV2422CPWR ACTIVE TSSOP PW 8 2000 Green (RoHS NIPDAU Level-1-260C-UNLIM 0 to 70 TV2422 & no Sb/Br) TLV2422ID ACTIVE SOIC D 8 75 Green (RoHS NIPDAU Level-1-260C-UNLIM -40 to 85 2422I & no Sb/Br) TLV2422IDR ACTIVE SOIC D 8 2500 Green (RoHS NIPDAU Level-1-260C-UNLIM -40 to 85 2422I & no Sb/Br) TLV2422MUB ACTIVE CFP U 10 1 TBD Call TI N / A for Pkg Type -55 to 125 9751401QHA TLV2422M (1) The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. (2) RoHS: TI defines "RoHS" to mean semiconductor products that are compliant with the current EU RoHS requirements for all 10 RoHS substances, including the requirement that RoHS substance do not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, "RoHS" products are suitable for use in specified lead-free processes. TI may reference these types of products as "Pb-Free". RoHS Exempt: TI defines "RoHS Exempt" to mean products that contain lead but are compliant with EU RoHS pursuant to a specific EU RoHS exemption. Green: TI defines "Green" to mean the content of Chlorine (Cl) and Bromine (Br) based flame retardants meet JS709B low halogen requirements of <=1000ppm threshold. Antimony trioxide based flame retardants must also meet the <=1000ppm threshold requirement. (3) MSL, Peak Temp. - The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature. Addendum-Page 1

PACKAGE OPTION ADDENDUM www.ti.com 6-Feb-2020 (4) There may be additional marking, which relates to the logo, the lot trace code information, or the environmental category on the device. (5) Multiple Device Markings will be inside parentheses. Only one Device Marking contained in parentheses and separated by a "~" will appear on a device. If a line is indented then it is a continuation of the previous line and the two combined represent the entire Device Marking for that device. (6) Lead/Ball Finish - Orderable Devices may have multiple material finish options. Finish options are separated by a vertical ruled line. Lead/Ball Finish values may wrap to two lines if the finish value exceeds the maximum column width. Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis. OTHER QUALIFIED VERSIONS OF TLV2422, TLV2422M : •Catalog: TLV2422 •Automotive: TLV2422-Q1, TLV2422-Q1 •Military: TLV2422M NOTE: Qualified Version Definitions: •Catalog - TI's standard catalog product •Automotive - Q100 devices qualified for high-reliability automotive applications targeting zero defects •Military - QML certified for Military and Defense Applications Addendum-Page 2

PACKAGE MATERIALS INFORMATION www.ti.com 10-Aug-2016 TAPE AND REEL INFORMATION *Alldimensionsarenominal Device Package Package Pins SPQ Reel Reel A0 B0 K0 P1 W Pin1 Type Drawing Diameter Width (mm) (mm) (mm) (mm) (mm) Quadrant (mm) W1(mm) TLV2422AIDR SOIC D 8 2500 330.0 12.4 6.4 5.2 2.1 8.0 12.0 Q1 TLV2422AIPWR TSSOP PW 8 2000 330.0 12.4 7.0 3.6 1.6 8.0 12.0 Q1 TLV2422CPWR TSSOP PW 8 2000 330.0 12.4 7.0 3.6 1.6 8.0 12.0 Q1 TLV2422IDR SOIC D 8 2500 330.0 12.4 6.4 5.2 2.1 8.0 12.0 Q1 PackMaterials-Page1

PACKAGE MATERIALS INFORMATION www.ti.com 10-Aug-2016 *Alldimensionsarenominal Device PackageType PackageDrawing Pins SPQ Length(mm) Width(mm) Height(mm) TLV2422AIDR SOIC D 8 2500 340.5 338.1 20.6 TLV2422AIPWR TSSOP PW 8 2000 367.0 367.0 35.0 TLV2422CPWR TSSOP PW 8 2000 367.0 367.0 35.0 TLV2422IDR SOIC D 8 2500 340.5 338.1 20.6 PackMaterials-Page2

PACKAGE OUTLINE U0010A CFP - 2.03 mm max height SCALE 1.400 CERAMIC FLATPACK .27 MAX .045 MAX .010 .002 PIN 1 ID GLASS .005 MIN TYP TYP 1 10 8X .050 .005 .27 MAX GLASS 10X .017 .002 5 6 +.019 5X .32 .01 .241 5X .32 .01 -.003 .005 .001 +.013 .067 -.012 .045 .026 4225582/A 01/2020 NOTES: 1. All linear dimensions are in inches. Any dimensions in parenthesis are for reference only. Dimensioning and tolerancing per ASME Y14.5M. 2. This drawing is subject to change without notice. www.ti.com

PACKAGE OUTLINE D0008A SOIC - 1.75 mm max height SCALE 2.800 SMALL OUTLINE INTEGRATED CIRCUIT C SEATING PLANE .228-.244 TYP [5.80-6.19] .004 [0.1] C A PIN 1 ID AREA 6X .050 [1.27] 8 1 2X .189-.197 [4.81-5.00] .150 NOTE 3 [3.81] 4X (0 -15 ) 4 5 8X .012-.020 B .150-.157 [0.31-0.51] .069 MAX [3.81-3.98] .010 [0.25] C A B [1.75] NOTE 4 .005-.010 TYP [0.13-0.25] 4X (0 -15 ) SEE DETAIL A .010 [0.25] .004-.010 0 - 8 [0.11-0.25] .016-.050 [0.41-1.27] DETAIL A (.041) TYPICAL [1.04] 4214825/C 02/2019 NOTES: 1. Linear dimensions are in inches [millimeters]. Dimensions in parenthesis are for reference only. Controlling dimensions are in inches. Dimensioning and tolerancing per ASME Y14.5M. 2. This drawing is subject to change without notice. 3. This dimension does not include mold flash, protrusions, or gate burrs. Mold flash, protrusions, or gate burrs shall not exceed .006 [0.15] per side. 4. This dimension does not include interlead flash. 5. Reference JEDEC registration MS-012, variation AA. www.ti.com

EXAMPLE BOARD LAYOUT D0008A SOIC - 1.75 mm max height SMALL OUTLINE INTEGRATED CIRCUIT 8X (.061 ) [1.55] SYMM SEE DETAILS 1 8 8X (.024) [0.6] SYMM (R.002 ) TYP [0.05] 5 4 6X (.050 ) [1.27] (.213) [5.4] LAND PATTERN EXAMPLE EXPOSED METAL SHOWN SCALE:8X SOLDER MASK SOLDER MASK METAL OPENING OPENING METAL UNDER SOLDER MASK EXPOSED METAL EXPOSED METAL .0028 MAX .0028 MIN [0.07] [0.07] ALL AROUND ALL AROUND NON SOLDER MASK SOLDER MASK DEFINED DEFINED SOLDER MASK DETAILS 4214825/C 02/2019 NOTES: (continued) 6. Publication IPC-7351 may have alternate designs. 7. Solder mask tolerances between and around signal pads can vary based on board fabrication site. www.ti.com

EXAMPLE STENCIL DESIGN D0008A SOIC - 1.75 mm max height SMALL OUTLINE INTEGRATED CIRCUIT 8X (.061 ) [1.55] SYMM 1 8 8X (.024) [0.6] SYMM (R.002 ) TYP [0.05] 5 4 6X (.050 ) [1.27] (.213) [5.4] SOLDER PASTE EXAMPLE BASED ON .005 INCH [0.125 MM] THICK STENCIL SCALE:8X 4214825/C 02/2019 NOTES: (continued) 8. Laser cutting apertures with trapezoidal walls and rounded corners may offer better paste release. IPC-7525 may have alternate design recommendations. 9. Board assembly site may have different recommendations for stencil design. www.ti.com

PACKAGE OUTLINE PW0008A TSSOP - 1.2 mm max height SCALE 2.800 SMALL OUTLINE PACKAGE C 6.6 TYP SEATING PLANE 6.2 PIN 1 ID A 0.1 C AREA 6X 0.65 8 1 3.1 2X 2.9 NOTE 3 1.95 4 5 0.30 8X 0.19 4.5 1.2 MAX B 0.1 C A B 4.3 NOTE 4 (0.15) TYP SEE DETAIL A 0.25 GAGE PLANE 0.15 0.75 0 - 8 0.05 0.50 DETAIL A TYPICAL 4221848/A 02/2015 NOTES: 1. All linear dimensions are in millimeters. Any dimensions in parenthesis are for reference only. Dimensioning and tolerancing per ASME Y14.5M. 2. This drawing is subject to change without notice. 3. This dimension does not include mold flash, protrusions, or gate burrs. Mold flash, protrusions, or gate burrs shall not exceed 0.15 mm per side. 4. This dimension does not include interlead flash. Interlead flash shall not exceed 0.25 mm per side. 5. Reference JEDEC registration MO-153, variation AA. www.ti.com

EXAMPLE BOARD LAYOUT PW0008A TSSOP - 1.2 mm max height SMALL OUTLINE PACKAGE 8X (1.5) 8X (0.45) SYMM (R0.05) 1 TYP 8 SYMM 6X (0.65) 5 4 (5.8) LAND PATTERN EXAMPLE SCALE:10X SOOPLEDNEINRG MASK METAL MSOELTDAEL RU NMDAESRK SOOPLEDNEINRG MASK 0.05 MAX 0.05 MIN ALL AROUND ALL AROUND NON SOLDER MASK SOLDER MASK DEFINED DEFINED SOLDER MASK DETAILS NOT TO SCALE 4221848/A 02/2015 NOTES: (continued) 6. Publication IPC-7351 may have alternate designs. 7. Solder mask tolerances between and around signal pads can vary based on board fabrication site. www.ti.com

EXAMPLE STENCIL DESIGN PW0008A TSSOP - 1.2 mm max height SMALL OUTLINE PACKAGE 8X (1.5) SYMM (R0.05) TYP 8X (0.45) 1 8 SYMM 6X (0.65) 5 4 (5.8) SOLDER PASTE EXAMPLE BASED ON 0.125 mm THICK STENCIL SCALE:10X 4221848/A 02/2015 NOTES: (continued) 8. Laser cutting apertures with trapezoidal walls and rounded corners may offer better paste release. IPC-7525 may have alternate design recommendations. 9. Board assembly site may have different recommendations for stencil design. www.ti.com

IMPORTANTNOTICEANDDISCLAIMER TI PROVIDES TECHNICAL AND RELIABILITY DATA (INCLUDING DATASHEETS), DESIGN RESOURCES (INCLUDING REFERENCE DESIGNS), APPLICATION OR OTHER DESIGN ADVICE, WEB TOOLS, SAFETY INFORMATION, AND OTHER RESOURCES “AS IS” AND WITH ALL FAULTS, AND DISCLAIMS ALL WARRANTIES, EXPRESS AND IMPLIED, INCLUDING WITHOUT LIMITATION ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY RIGHTS. These resources are intended for skilled developers designing with TI products. You are solely responsible for (1) selecting the appropriate TI products for your application, (2) designing, validating and testing your application, and (3) ensuring your application meets applicable standards, and any other safety, security, or other requirements. These resources are subject to change without notice. TI grants you permission to use these resources only for development of an application that uses the TI products described in the resource. Other reproduction and display of these resources is prohibited. No license is granted to any other TI intellectual property right or to any third party intellectual property right. TI disclaims responsibility for, and you will fully indemnify TI and its representatives against, any claims, damages, costs, losses, and liabilities arising out of your use of these resources. TI’s products are provided subject to TI’s Terms of Sale (www.ti.com/legal/termsofsale.html) or other applicable terms available either on ti.com or provided in conjunction with such TI products. TI’s provision of these resources does not expand or otherwise alter TI’s applicable warranties or warranty disclaimers for TI products. Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright © 2020, Texas Instruments Incorporated