Product Sample & Technical Tools & Support & Folder Buy Documents Software Community TLC2272-Q1,TLC2272A-Q1,TLC2274-Q1,TLC2274A-Q1 SGLS007F–FEBRUARY2003–REVISEDMARCH2016 TLC227x-Q1 Advanced LinCMOS™ Rail-To-Rail Operational Amplifiers 1 Features The TLC227x-Q1, exhibiting high input impedance and low noise, is excellent for small-signal • QualifiedforAutomotiveApplications 1 conditioning for high-impedance sources, such as – DeviceTemperatureGrade: –40°Cto125°C piezoelectric transducers. In addition, the rail-to-rail AmbientOperatingTemperatureRange output feature, with single- or split-supplies, makes – DeviceHBMESDClassificationLevel2 this family a great choice when interfacing with analog-to-digital converters (ADCs). For precision – DeviceCDMESDClassificationLevelC6 applications, the TLC227xA-Q1 family is available • OutputSwingIncludesBothSupplyRails with a maximum input offset voltage of 950 μV. This • LowNoise:9nV/√HzTypicalatf=1kHz familyisfullycharacterizedat5Vand±5V. • LowInputBiasCurrent:1pATypical They offer increased output dynamic range, lower • FullySpecifiedforBothSingle-SupplyandSplit- noise voltage, and lower input offset voltage. This enhanced feature set allows them to be used in a SupplyOperation wider range of applications. For applications that • Common-ModeInputVoltageRangeIncludes require higher output drive and wider input voltage NegativeRail range, see the TLV2432-Q1 and TLV2442-Q1 • High-GainBandwidth:2.2MHzTypical devices. All of the parameters of the TLC227x-Q1 • HighSlewRate:3.6V/μsTypical family enables the device to be applicable in most automotiveapplications. • LowInputOffsetVoltage950μVMaximumat TA=25°C DeviceInformation(1) • MacromodelIncluded PARTNUMBER PACKAGE BODYSIZE(NOM) SOIC(8) 4.90mmx3.91mm 2 Applications TLC2272-Q1 TSSOP(8) 3.00mm×4.40mm • GearBoxes SOIC(14) 8.65mmx3.91mm TLC2274-Q1 • TransmissionControl TSSOP(14) 5.00mm×4.40mm • On-BoardChargers (1) For all available packages, see the orderable addendum at • BodyControlModules theendofthedatasheet. • SteeringAngleSensors MaximumPeak-To-PeakOutputVoltagevs • ElectricPowerSteering SupplyVoltage • EngineControlUnits 16 • Airbags e (V) TA= 25°C • BlindSpotDetection oltag 14 • Clusters V ut • CarAudio p ut 12 • NavigationSystems O I =±50µA k O a • WhiteGoods(Refrigerators,WashingMachines) e P o- 10 3 Description k-t a The TLC2272-Q1 and TLC2274-Q1 devices are dual Pe IO=±500µA m 8 and quadruple operational amplifiers from Texas u m Instruments. Both devices exhibit rail-to-rail output xi performance for increased dynamic range in single- Ma 6 or split-supply applications. The TLC227x-Q1 family − offers 2 MHz of bandwidth and 3 V/μs of slew rate for P)P) PP higher-speed applications. These devices offer V(VOO( 4 comparable AC performance while having better 4 6 8 10 12 14 16 noise,inputoffsetvoltage,andpowerdissipationthan |VDD±|−Supply Voltage (V) existing CMOS operational amplifiers. The TLC227x‑Q1 has a noise voltage of 9 nV/√Hz, two timeslowerthancompetitivesolutions. 1 An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications, intellectualpropertymattersandotherimportantdisclaimers.PRODUCTIONDATA.

TLC2272-Q1,TLC2272A-Q1,TLC2274-Q1,TLC2274A-Q1 SGLS007F–FEBRUARY2003–REVISEDMARCH2016 www.ti.com Table of Contents 1 Features.................................................................. 1 7.1 Overview.................................................................22 2 Applications........................................................... 1 7.2 FunctionalBlockDiagram.......................................22 3 Description............................................................. 1 7.3 FeatureDescription.................................................22 7.4 DeviceFunctionalModes........................................22 4 RevisionHistory..................................................... 2 8 ApplicationandImplementation........................ 23 5 PinConfigurationandFunctions......................... 3 8.1 ApplicationInformation............................................23 6 Specifications......................................................... 4 8.2 TypicalApplication..................................................24 6.1 AbsoluteMaximumRatings......................................4 9 PowerSupplyRecommendations...................... 27 6.2 ESDRatings..............................................................4 10 Layout................................................................... 27 6.3 RecommendedOperatingConditions.......................4 6.4 ThermalInformation..................................................5 10.1 LayoutGuidelines.................................................27 6.5 TLC2272-Q1andTLC2272A-Q1Electrical 10.2 LayoutExamples...................................................27 CharacteristicsV =5V..........................................5 11 DeviceandDocumentationSupport................. 28 DD 6.6 TLC2272-Q1andTLC2272A-Q1Electrical 11.1 DocumentationSupport........................................28 CharacteristicsVDD±=±5V.......................................6 11.2 RelatedLinks........................................................28 6.7 TLC2274-Q1andTLC2274A-Q1Electrical 11.3 CommunityResources..........................................28 CharacteristicsV =5V..........................................8 DD 11.4 Trademarks...........................................................28 6.8 TLC2274-Q1andTLC2274A-Q1Electrical 11.5 ElectrostaticDischargeCaution............................28 CharacteristicsV =±5V.......................................9 DD± 11.6 Glossary................................................................28 6.9 TypicalCharacteristics............................................11 12 Mechanical,Packaging,andOrderable 7 DetailedDescription............................................ 22 Information........................................................... 28 4 Revision History NOTE:Pagenumbersforpreviousrevisionsmaydifferfrompagenumbersinthecurrentversion. ChangesfromRevisionE(January2012)toRevisionF Page • AddedPinConfigurationandFunctionssection,FeatureDescriptionsection,DeviceFunctionalModes,Application andImplementationsection,PowerSupplyRecommendationssection,Layoutsection,DeviceandDocumentation Supportsection,andMechanical,Packaging,andOrderableInformationsection................................................................ 1 • AddedESDratingstable........................................................................................................................................................ 4 ChangesfromRevisionD(March2009)toRevisionE Page • DeletedESDratingstable...................................................................................................................................................... 4 2 SubmitDocumentationFeedback Copyright©2003–2016,TexasInstrumentsIncorporated ProductFolderLinks:TLC2272-Q1 TLC2272A-Q1 TLC2274-Q1 TLC2274A-Q1

TLC2272-Q1,TLC2272A-Q1,TLC2274-Q1,TLC2274A-Q1 www.ti.com SGLS007F–FEBRUARY2003–REVISEDMARCH2016 5 Pin Configuration and Functions TLC2272-Q1 DorPWPackage TLC2274-Q1 8-PinSOICorTSSOP DorPWPackage TopView 14-PinSOICorTSSOP TopView PinFunctions PIN I/O DESCRIPTION NAME TLC2272-Q1 TLC2274-Q1 1IN+ 3 3 I Noninvertinginput,channel1 1IN– 2 2 I Invertinginput,channel1 1OUT 1 1 O Output,channel1 2IN+ 5 5 I Noninvertinginput,channel2 2IN– 6 6 I Invertinginput,channel2 2OUT 7 7 O Output,channel2 3IN+ — 10 I Noninvertinginput,channel3 3IN– — 9 I Invertinginput,channel3 3OUT — 8 O Output,channel3 4IN+ — 12 I Noninvertinginput,channel4 4IN– — 13 I Invertinginput,channel4 4OUT — 14 O Output,channel4 V 8 4 I Positive(highest)supply DD+ V 4 11 I Negative(lowest)supply DD– Copyright©2003–2016,TexasInstrumentsIncorporated SubmitDocumentationFeedback 3 ProductFolderLinks:TLC2272-Q1 TLC2272A-Q1 TLC2274-Q1 TLC2274A-Q1

TLC2272-Q1,TLC2272A-Q1,TLC2274-Q1,TLC2274A-Q1 SGLS007F–FEBRUARY2003–REVISEDMARCH2016 www.ti.com 6 Specifications 6.1 Absolute Maximum Ratings overoperatingfree-airtemperaturerange(unlessotherwisenoted)(1) MIN MAX UNIT Supplyvoltage,V +(2) 8 V DD V –(2) –8 V DD Differentialinputvoltage,V (3) ±16 V ID Inputvoltage,V(anyinput)(2) V −0.3 V V I DD− DD+ Inputcurrent,I (anyinput) ±5 mA I Outputcurrent,I ±50 mA O TotalcurrentintoV ±50 mA DD+ TotalcurrentoutofV ±50 mA DD– Durationofshort-circuitcurrentat(orbelow)25°C(4) Unlimited Operatingfree-airtemperaturerange,T –40 125 °C A Leadtemperature1,6mm(1/16inch)fromcasefor10seconds DorPWpackage 260 °C Storagetemperature,T –65 150 °C stg (1) StressesbeyondthoselistedunderAbsoluteMaximumRatingsmaycausepermanentdamagetothedevice.Thesearestressratings only,whichdonotimplyfunctionaloperationofthedeviceattheseoranyotherconditionsbeyondthoseindicatedunderRecommended OperatingConditions.Exposuretoabsolute-maximum-ratedconditionsforextendedperiodsmayaffectdevicereliability. (2) Allvoltagevalues,exceptdifferentialvoltages,arewithrespecttothemidpointbetweenV andV . DD+ DD− (3) DifferentialvoltagesareatIN+withrespecttoIN–.ExcessivecurrentwillflowifinputisbroughtbelowV −0.3V. DD– (4) Theoutputmaybeshortedtoeithersupply.Temperatureorsupplyvoltagesmustbelimitedtoensurethatthemaximumdissipation ratingisnotexceeded. 6.2 ESD Ratings VALUE UNIT Human-bodymodel(HBM),perAECQ100-002(1) ±2000 V Electrostaticdischarge V (ESD) Charged-devicemodel(CDM),perAECQ100-011 ±1000 (1) AECQ100-002indicatesthatHBMstressingshallbeinaccordancewiththeANSI/ESDA/JEDECJS-001specification. 6.3 Recommended Operating Conditions overoperatingfree-airtemperaturerange(unlessotherwisenoted) MIN MAX UNIT V Supplyvoltage ±2.2 ±8 V DD± V Inputvoltage V V −1.5 V I DD− DD+ V Common-modeinputvoltage V V −1.5 V IC DD− DD+ T Operatingfree-airtemperature −40 125 °C A 4 SubmitDocumentationFeedback Copyright©2003–2016,TexasInstrumentsIncorporated ProductFolderLinks:TLC2272-Q1 TLC2272A-Q1 TLC2274-Q1 TLC2274A-Q1

TLC2272-Q1,TLC2272A-Q1,TLC2274-Q1,TLC2274A-Q1 www.ti.com SGLS007F–FEBRUARY2003–REVISEDMARCH2016 6.4 Thermal Information TLC2272-Q1 TLC2274-Q1 THERMALMETRIC(1) D(SOIC) PW(TSSOP) D(SOIC) PW(TSSOP) UNIT 8PINS 8PINS 14PINS 14PINS R Junction-to-ambientthermalresistance 115.6 175.8 83.8 111.6 °C/W θJA R Junction-to-case(top)thermalresistance 61.8 58.8 43.2 41.2 °C/W θJC(top) R Junction-to-boardthermalresistance 55.9 104.3 38.4 54.7 °C/W θJB ψ Junction-to-topcharacterizationparameter 14.3 5.9 9.4 3.9 °C/W JT Junction-to-boardcharacterization ψ 55.4 102.3 38.1 53.9 °C/W JB parameter Junction-to-case(bottom)thermal R — — — — °C/W θJC(bot) resistance (1) Formoreinformationabouttraditionalandnewthermalmetrics,seetheSemiconductorandICPackageThermalMetricsapplication report,SPRA953. 6.5 TLC2272-Q1 and TLC2272A-Q1 Electrical Characteristics V = 5 V DD atspecifiedfree-airtemperature,V =5V;T =25°C,unlessotherwisenoted. DD A PARAMETER TESTCONDITIONS MIN TYP MAX UNIT TLC2272-Q1 300 2500 TA=25°C VIO Inputoffsetvoltage VVIOC==00VV,,RVSDD=±5=0±Ω2.5V, TTLLCC22227722A-Q-Q11 300 3090500 µV FullRange(1) TLC2272A-Q1 1500 Temperaturecoefficientof αVIO inputoffsetvoltage VIC=0V,VDD±=±2.5V,VO=0V,RS=50Ω 2 μV/°C Inputoffsetvoltagelong-termdrift(2) VIC=0V,VDD±=±2.5V,VO=0V,RS=50Ω 0.002 μV/mo TA=25°C 0.5 60 IIO Inputoffsetcurrent VIC=0V,VDD±=±2.5V,VO=0V,RS=50Ω FullRange(1) 800 pA TA=25°C 1 60 IIB Inputbiascurrent VIC=0V,VDD±=±2.5V,VO=0V,RS=50Ω FullRange(1) 800 pA TA=25°C –0.3 2.5 4 VICR Common-modeinputvoltage RS=50Ω;|VIO|≤5mV FullRange(1) 0 2.5 3.5 V IOH=−20μA 4.99 TA=25°C 4.85 4.93 VOH High-leveloutputvoltage IOH=−200μA FullRange(1) 4.85 V TA=25°C 4.25 4.65 IOH=−1mA FullRange(1) 4.25 IOL=50μA 0.01 TA=25°C 0.09 0.15 VOL Low-leveloutputvoltage VIC=2.5V IOL=500μA FullRange(1) 0.15 V TA=25°C 0.9 1.5 IOL=5mA FullRange(1) 1.5 AVD Lvoalrtgaeg-esiagmnapllidfiicffaetrioenntial VIC=2.5V,VO=1Vto4V RL=10kΩ(3) TFAul=lR2a5n°gCe(1) 1100 35 V/mV RL=1MΩ(3) 175 rid Differentialinputresistance 1012 Ω ri Common-modeinputresistance 1012 Ω ci Common-modeinputcapacitance f=10kHz,Ppackage 8 pF zo Closed-loopoutputimpedance f=1MHz,AV=10 140 Ω TA=25°C 70 75 CMRR Common-moderejectionratio VIC=0Vto2.7V,VO=2.5V,RS=50Ω FullRange(1) 70 dB (1) T =–40°Cto125°C. A (2) Typicalvaluesarebasedontheinputoffsetvoltageshiftobservedthrough168hoursofoperatinglifetestatT =150°Cextrapolatedto A T =25°CusingtheArrheniusequationandassuminganactivationenergyof0.96eV. A (3) Referencedto0V. Copyright©2003–2016,TexasInstrumentsIncorporated SubmitDocumentationFeedback 5 ProductFolderLinks:TLC2272-Q1 TLC2272A-Q1 TLC2274-Q1 TLC2274A-Q1

TLC2272-Q1,TLC2272A-Q1,TLC2274-Q1,TLC2274A-Q1 SGLS007F–FEBRUARY2003–REVISEDMARCH2016 www.ti.com TLC2272-Q1 and TLC2272A-Q1 Electrical Characteristics V = 5 V (continued) DD atspecifiedfree-airtemperature,V =5V;T =25°C,unlessotherwisenoted. DD A PARAMETER TESTCONDITIONS MIN TYP MAX UNIT Supply-voltagerejectionratio TA=25°C 80 95 kSVR (ΔVDD/ΔVIO) VDD=4.4Vto16V,VIC=VDD/2,noload FullRange(1) 80 dB TA=25°C 2.2 3 IDD Supplycurrrent VO=2.5V,noload FullRange(1) 3 mA SR Slewrateatunitygain VCOL==100.50VpFto(3)2.5V,RL=10kΩ(3), TFAul=lR2a5n°gCe(1) 21..37 3.6 V/µs f=10Hz 50 Vn Equivalentinputnoisevoltage nV/√Hz f=1kHz 9 Peak-to-peakequivalent f=0.1Hzto1Hz 1 VNPP inputnoisevoltage f=0.1Hzto10Hz 1.4 µV In Equivalentinputnoisecurrent 0.6 fA/√Hz AV=1 0.0013% THD+N Totalharmonicdistortion+noise VO=0.5Vto2.5V,f=20kHz,RL=10kΩ(3) AV=10 0.004% AV=100 0.03% Gain-bandwidthproduct f=10kHz,RL=10kΩ(3),CL=100pF(3) 2.18 MHz BOM Maximumoutput-swingbandwidth VO(PP)=2V,AV=1,RL=10kΩ(3),CL=100pF(3) 1 MHz ts Settlingtime ASVte=p–=10,.R5LV=to102.k5ΩV(3,),CL=100pF(3) TToo00..10%1% 12..56 µs φm Phasemarginatunitygain RL=10kΩ(3),CL=100pF(3) 50° Gainmargin RL=10kΩ(3),CL=100pF(3) 10 dB 6.6 TLC2272-Q1 and TLC2272A-Q1 Electrical Characteristics V = ±5 V DD± atspecifiedfree-airtemperature,V =±5V;T =25°C,unlessotherwisenoted. DD± A PARAMETER TESTCONDITIONS MIN TYP MAX UNIT TLC2272-Q1 300 2500 TA=25°C VIO Inputoffsetvoltage VRISC==500VΩ,VO=0V, TTLLCC22227722A-Q-Q11 300 3090500 µV FullRange(1) TLC2272A-Q1 1500 Temperaturecoefficientof αVIO inputoffsetvoltage VIC=0V,VO=0V,RS=50Ω 2 μV/°C Inputoffsetvoltagelong-termdrift(2) VIC=0V,VO=0V,RS=50Ω 0.002 μV/mo TA=25°C 0.5 60 IIO Inputoffsetcurrent VIC=0V,VO=0V,RS=50Ω FullRange(1) 800 pA TA=25°C 1 60 IIB Inputbiascurrent VIC=0V,VO=0V,RS=50Ω FullRange(1) 800 pA TA=25°C –5.3 0 4 VICR Common-modeinputvoltage RS=50Ω;|VIO|≤5mV FullRange(1) –5 0 3.5 V IO=−20μA 4.99 TA=25°C 4.85 4.93 VOM+ Mouatxpiumtuvmoltpaogseitivepeak IO=−200μA FullRange(1) 4.85 V TA=25°C 4.25 4.65 IO=−1mA FullRange(1) 4.25 IO=50μA –4.99 TA=25°C –4.85 –4.91 VOM- Mpeaaxkimouumtpuntevgoalttaivgee VIC=0V IO=500μA FullRange(1) –4.85 V TA=25°C –3.5 –4.1 IO=5mA FullRange(1) –3.5 (1) T =–40°Cto125°C. A (2) Typicalvaluesarebasedontheinputoffsetvoltageshiftobservedthrough168hoursofoperatinglifetestatT =150°Cextrapolatedto A T =25°CusingtheArrheniusequationandassuminganactivationenergyof0.96eV. A 6 SubmitDocumentationFeedback Copyright©2003–2016,TexasInstrumentsIncorporated ProductFolderLinks:TLC2272-Q1 TLC2272A-Q1 TLC2274-Q1 TLC2274A-Q1

TLC2272-Q1,TLC2272A-Q1,TLC2274-Q1,TLC2274A-Q1 www.ti.com SGLS007F–FEBRUARY2003–REVISEDMARCH2016 TLC2272-Q1 and TLC2272A-Q1 Electrical Characteristics V = ±5 V (continued) DD± atspecifiedfree-airtemperature,V =±5V;T =25°C,unlessotherwisenoted. DD± A PARAMETER TESTCONDITIONS MIN TYP MAX UNIT TA=25°C 20 50 AVD Lvoalrtgaeg-esiagmnapllidfiicffaetrioenntial VO=±4V RL=10kΩ FullRange(1) 20 V/mV RL=1MΩ 300 rid Differentialinputresistance 1012 Ω ri Common-modeinputresistance 1012 Ω ci Common-modeinputcapacitance f=10kHz,Ppackage 8 pF zo Closed-loopoutputimpedance f=1MHz,AV=10 130 Ω TA=25°C 75 80 CMRR Common-moderejectionratio VIC=–5Vto2.7V,VO=0V,RS=50Ω FullRange(1) 75 dB Supply-voltagerejectionratio TA=25°C 80 95 kSVR (ΔVDD/ΔVIO) VDD+=2.2Vto±8V,VIC=0V,noload FullRange(1) 80 dB TA=25°C 2.4 3 IDD Supplycurrrent VO=0V,noload FullRange(1) 3 mA TA=25°C 2.3 3.6 SR Slewrateatunitygain VO=±2.3V,RL=10kΩ,CL=100pF FullRange(1) 1.7 V/µs f=10Hz 50 Vn Equivalentinputnoisevoltage nV/√Hz f=1kHz 9 Peak-to-peakequivalent f=0.1Hzto1Hz 1 VNPP inputnoisevoltage f=0.1Hzto10Hz 1.4 µV In Equivalentinputnoisecurrent 0.6 fA/√Hz AV=1 0.0011% THD+N Totalharmonicdistortion+noise VO=±2.3,f=20kHz,RL=10kΩ AV=10 0.004% AV=100 0.03% Gain-bandwidthproduct f=10kHz,RL=10kΩ,CL=100pF 2.25 MHz BOM Maximumoutput-swingbandwidth VO(PP)=4.6V,AV=1,RL=10kΩ,CL=100pF 0.54 MHz ts Settlingtime ASVte=p–=1–,2R.3L=V1to02k.Ω3,V,CL=100pF TToo00..10%1% 13..52 µs φm Phasemarginatunitygain RL=10kΩ,CL=100pF 52° Gainmargin RL=10kΩ,CL=100pF 10 dB Copyright©2003–2016,TexasInstrumentsIncorporated SubmitDocumentationFeedback 7 ProductFolderLinks:TLC2272-Q1 TLC2272A-Q1 TLC2274-Q1 TLC2274A-Q1

TLC2272-Q1,TLC2272A-Q1,TLC2274-Q1,TLC2274A-Q1 SGLS007F–FEBRUARY2003–REVISEDMARCH2016 www.ti.com 6.7 TLC2274-Q1 and TLC2274A-Q1 Electrical Characteristics V = 5 V DD atspecifiedfree-airtemperature,V =5V;T =25°C,unlessotherwisenoted. DD A PARAMETER TESTCONDITIONS MIN TYP MAX UNIT TLC2274-Q1 300 2500 TA=25°C VIO Inputoffsetvoltage VVIOC==00VV,,RVSDD=±5=0±Ω2.5V, TTLLCC22227744A-Q-Q11 300 3090500 µV FullRange(1) TLC2274A-Q1 1500 Temperaturecoefficientof αVIO inputoffsetvoltage VIC=0V,VDD±=±2.5V,VO=0V,RS=50Ω 2 μV/°C Inputoffsetvoltagelong-termdrift(2) VIC=0V,VDD±=±2.5V,VO=0V,RS=50Ω 0.002 μV/mo TA=25°C 0.5 60 IIO Inputoffsetcurrent VIC=0V,VDD±=±2.5V,VO=0V,RS=50Ω FullRange(1) 800 pA TA=25°C 1 60 IIB Inputbiascurrent VIC=0V,VDD±=±2.5V,VO=0V,RS=50Ω FullRange(1) 800 pA TA=25°C –0.3 2.5 4 VICR Common-modeinputvoltage RS=50Ω;|VIO|≤5mV FullRange(1) 0 2.5 3.5 V IOH=−20μA 4.99 TA=25°C 4.85 4.93 VOH High-leveloutputvoltage IOH=−200μA FullRange(1) 4.85 V TA=25°C 4.25 4.65 IOH=−1mA FullRange(1) 4.25 IOL=50μA 0.01 TA=25°C 0.09 0.15 VOL Low-leveloutputvoltage VIC=2.5V IOL=500μA FullRange(1) 0.15 V TA=25°C 0.9 1.5 IOL=5mA FullRange(1) 1.5 AVD Lvoalrtgaeg-esiagmnapllidfiicffaetrioenntial VIC=2.5V,VO=1Vto4V RL=10kΩ(3) TFAul=lR2a5n°gCe(1) 1100 35 V/mV RL=1MΩ(3) 175 rid Differentialinputresistance 1012 Ω ri Common-modeinputresistance 1012 Ω ci Common-modeinputcapacitance f=10kHz,Ppackage 8 pF zo Closed-loopoutputimpedance f=1MHz,AV=10 140 Ω TA=25°C 70 75 CMRR Common-moderejectionratio VIC=0Vto2.7V,VO=2.5V,RS=50Ω FullRange(1) 70 dB Supply-voltagerejectionratio TA=25°C 80 95 kSVR (ΔVDD/ΔVIO) VDD=4.4Vto16V,VIC=VDD/2,noload FullRange(1) 80 dB TA=25°C 4.4 6 IDD Supplycurrrent VO=2.5V,noload FullRange(1) 6 mA SR Slewrateatunitygain VROL==100.5kVΩ(t3o),2C.5LV=,100pF(3) TFAul=lR2a5n°gCe(1) 21..37 3.6 V/µs f=10Hz 50 Vn Equivalentinputnoisevoltage nV/√Hz f=1kHz 9 Peak-to-peakequivalent f=0.1Hzto1Hz 1 VNPP inputnoisevoltage f=0.1Hzto10Hz 1.4 µV In Equivalentinputnoisecurrent 0.6 fA/√Hz AV=1 0.0013% THD+N Totalharmonicdistortion+noise VO=0.5Vto2.5V,f=20kHz,RL=10kΩ(3) AV=10 0.004% AV=100 0.03% Gain-bandwidthproduct f=10kHz,RL=10kΩ(3),CL=100pF(3) 2.18 MHz (1) T =–40°Cto125°C. A (2) Typicalvaluesarebasedontheinputoffsetvoltageshiftobservedthrough168hoursofoperatinglifetestatT =150°Cextrapolatedto A T =25°CusingtheArrheniusequationandassuminganactivationenergyof0.96eV. A (3) Referencedto0V. 8 SubmitDocumentationFeedback Copyright©2003–2016,TexasInstrumentsIncorporated ProductFolderLinks:TLC2272-Q1 TLC2272A-Q1 TLC2274-Q1 TLC2274A-Q1

TLC2272-Q1,TLC2272A-Q1,TLC2274-Q1,TLC2274A-Q1 www.ti.com SGLS007F–FEBRUARY2003–REVISEDMARCH2016 TLC2274-Q1 and TLC2274A-Q1 Electrical Characteristics V = 5 V (continued) DD atspecifiedfree-airtemperature,V =5V;T =25°C,unlessotherwisenoted. DD A PARAMETER TESTCONDITIONS MIN TYP MAX UNIT BOM Maximumoutput-swingbandwidth VO(PP)=2V,AV=1,RL=10kΩ(3),CL=100pF(3) 1 MHz ts Settlingtime ASVte=p–=10,.R5LV=to102.k5ΩV(3,),CL=100pF(3) TToo00..10%1% 12..56 µs φm Phasemarginatunitygain RL=10kΩ(3),CL=100pF(3) 50° Gainmargin RL=10kΩ(3),CL=100pF(3) 10 dB 6.8 TLC2274-Q1 and TLC2274A-Q1 Electrical Characteristics V = ±5 V DD± atspecifiedfree-airtemperature,V =±5V;T =25°C,unlessotherwisenoted. DD± A PARAMETER TESTCONDITIONS MIN TYP MAX UNIT TLC2274-Q1 300 2500 TA=25°C VIO Inputoffsetvoltage VRISC==500VΩ,VO=0V, TTLLCC22227744A-Q-Q11 300 3090500 µV FullRange(1) TLC2274A-Q1 1500 Temperaturecoefficientof αVIO inputoffsetvoltage VIC=0V,VO=0V,RS=50Ω 2 μV/°C Inputoffsetvoltagelong-termdrift(2) VIC=0V,VO=0V,RS=50Ω 0.002 μV/mo TA=25°C 0.5 60 IIO Inputoffsetcurrent VIC=0V,VO=0V,RS=50Ω FullRange(1) 800 pA TA=25°C 1 60 IIB Inputbiascurrent VIC=0V,VO=0V,RS=50Ω FullRange(1) 800 pA TA=25°C –5.3 0 4 VICR Common-modeinputvoltage RS=50Ω;|VIO|≤5mV FullRange(1) –5 0 3.5 V IO=−20μA 4.99 TA=25°C 4.85 4.93 VOM+ Mouatxpiumtuvmoltpaogseitivepeak IO=−200μA FullRange(1) 4.85 V TA=25°C 4.25 4.65 IO=−1mA FullRange(1) 4.25 IO=50μA –4.99 TA=25°C –4.85 –4.91 VOM- Mouatxpiumtuvmoltnaeggeativepeak VIC=0V IO=500μA FullRange(1) –4.85 V TA=25°C –3.5 –4.1 IO=5mA FullRange(1) –3.5 TA=25°C 20 50 AVD Lvoalrtgaeg-esiagmnapllidfiicffaetrioenntial VO=±4V RL=10kΩ FullRange(1) 20 V/mV RL=1MΩ 300 rid Differentialinputresistance 1012 Ω ri Common-modeinputresistance 1012 Ω ci Common-modeinputcapacitance f=10kHz,Ppackage 8 pF zo Closed-loopoutputimpedance f=1MHz,AV=10 130 Ω TA=25°C 75 80 CMRR Common-moderejectionratio VIC=–5Vto2.7V,VO=0V,RS=50Ω FullRange(1) 75 dB Supply-voltagerejectionratio TA=25°C 80 95 kSVR (ΔVDD/ΔVIO) VDD+=2.2Vto±8V,VIC=0V,noload FullRange(1) 80 dB TA=25°C 4.8 6 IDD Supplycurrrent VO=0V,noload FullRange(1) 6 mA TA=25°C 2.3 3.6 SR Slewrateatunitygain VO=±2.3V,RL=10kΩ,CL=100pF FullRange(1) 1.7 V/µs (1) T =–40°Cto125°C. A (2) Typicalvaluesarebasedontheinputoffsetvoltageshiftobservedthrough168hoursofoperatinglifetestatT =150°Cextrapolatedto A T =25°CusingtheArrheniusequationandassuminganactivationenergyof0.96eV. A Copyright©2003–2016,TexasInstrumentsIncorporated SubmitDocumentationFeedback 9 ProductFolderLinks:TLC2272-Q1 TLC2272A-Q1 TLC2274-Q1 TLC2274A-Q1

TLC2272-Q1,TLC2272A-Q1,TLC2274-Q1,TLC2274A-Q1 SGLS007F–FEBRUARY2003–REVISEDMARCH2016 www.ti.com TLC2274-Q1 and TLC2274A-Q1 Electrical Characteristics V = ±5 V (continued) DD± atspecifiedfree-airtemperature,V =±5V;T =25°C,unlessotherwisenoted. DD± A PARAMETER TESTCONDITIONS MIN TYP MAX UNIT f=10Hz 50 Vn Equivalentinputnoisevoltage nV/√Hz f=1kHz 9 Peak-to-peakequivalent f=0.1Hzto1Hz 1 VNPP inputnoisevoltage f=0.1Hzto10Hz 1.4 µV In Equivalentinputnoisecurrent 0.6 fA/√Hz AV=1 0.0011% THD+N Totalharmonicdistortion+noise VO=±2.3,f=20kHz,RL=10kΩ AV=10 0.004% AV=100 0.03% Gain-bandwidthproduct f=10kHz,RL=10kΩ,CL=100pF 2.25 MHz BOM Maximumoutput-swingbandwidth VO(PP)=4.6V,AV=1,RL=10kΩ,CL=100pF 0.54 MHz ts Settlingtime ASVte=p–=1–,2R.3L=V1to02k.Ω3,V,CL=100pF TToo00..10%1% 13..52 µs φm Phasemarginatunitygain RL=10kΩ,CL=100pF 52° Gainmargin RL=10kΩ,CL=100pF 10 dB 10 SubmitDocumentationFeedback Copyright©2003–2016,TexasInstrumentsIncorporated ProductFolderLinks:TLC2272-Q1 TLC2272A-Q1 TLC2274-Q1 TLC2274A-Q1

TLC2272-Q1,TLC2272A-Q1,TLC2274-Q1,TLC2274A-Q1 www.ti.com SGLS007F–FEBRUARY2003–REVISEDMARCH2016 6.9 Typical Characteristics Table1.TableofGraphs FIGURE(1) Distribution 1,2,3,4 V Inputoffsetvoltage IO vsCommon-modevoltage 5,6 α Inputoffsetvoltagetemperaturecoefficient Distribution 7,8,9,10(2) VIO I /I Inputbiasandinputoffsetcurrent vsFree-airtemperature 11(2) IB IO vsSupplyvoltage 12 V Inputvoltage I vsFree-airtemperature 13(2) V High-leveloutputvoltage vsHigh-leveloutputcurrent 14(2) OH V Low-leveloutputvoltage vsLow-leveloutputcurrent 15,16(2) OL V Maximumpositivepeakoutputvoltage vsOutputcurrent 17(2) OM+ V Maximumnegativepeakoutputvoltage vsOutputcurrent 18(2) OM- V Maximumpeak-to-peakoutputvoltage vsFrequency 19 O(PP) vsSupplyvoltage 20 I Short-circuitoutputcurrent OS vsFree-airtemperature 21(2) V Outputvoltage vsDifferentialinputvoltage 22,23 O Large-signaldifferentialvoltageamplification vsLoadresistance 24 A Large-signaldifferentialvoltageamplificationandphasemargin vsFrequency 25,26 VD Large-signaldifferentialvoltageamplification vsFree-airtemperature 27(2),28(2) z Outputimpedance vsFrequency 29,30 0 vsFrequency 31 CMRR Common-moderejectionratio vsFree-airtemperature 32 vsFrequency 33,34 k Supply-voltagerejectionratio SVR vsFree-airtemperature 35(2) vsSupplyvoltage 36(2),37(2) I Supplycurrent DD vsFree-airtemperature 38(2),39(2) vsLoadCapacitance 40 SR Slewrate vsFree-airtemperature 41(2) Invertinglarge-signalpulseresponse 42,43 Voltage-followerlarge-signalpulseresponse 44,45 V O Invertingsmall-signalpulseresponse 46,47 Voltage-followersmall-signalpulseresponse 48,49 V Equivalentinputnoisevoltage vsFrequency 50,51 n Noisevoltageovera10-secondperiod 52 Integratednoisevoltage vsFrequency 53 THD+N Totalharmonicdistortion+noise vsFrequency 54 vsSupplyvoltage 55 Gain-bandwidthproduct vsFree-airtemperature 56(2) φ Phasemargin vsLoadcapacitance 57 m Gainmargin vsLoadcapacitance 58 (1) ForallgraphswhereV =5V,allloadsarereferencedto2.5V. DD (2) Dataathighandlowtemperaturesareapplicableonlywithintheratedoperatingfree-airtemperaturerangesofthevariousdevices. Copyright©2003–2016,TexasInstrumentsIncorporated SubmitDocumentationFeedback 11 ProductFolderLinks:TLC2272-Q1 TLC2272A-Q1 TLC2274-Q1 TLC2274A-Q1

TLC2272-Q1,TLC2272A-Q1,TLC2274-Q1,TLC2274A-Q1 SGLS007F–FEBRUARY2003–REVISEDMARCH2016 www.ti.com 20 20 891AmplifiersFrom 891AmplifiersFrom 2WaferLots 2 Wafer Lots VDD=±2.5 V VDD=±5 V % 15 TA= 25°C % 15 TA= 25°C − − s s er er plifi plifi m m A 10 A 10 of of e e g g a a nt nt e e c c er 5 er 5 P P 0 0 −1.6 −1.2 −0.8 −0.4 0 0.4 0.8 1.2 1.6 −1.6 −1.2 −0.8 −0.4 0 0.4 0.8 1.2 1.6 VIO−InputOffsetVoltage−mV VIO−InputOffsetVoltage−mV Figure1.DistributionofTLC2272-Q1InputOffsetVoltage Figure2.DistributionofTLC2272-Q1InputOffsetVoltage 20 20 992AmplifiersFrom 992AmplifiersFrom 2WaferLots 2WaferLots VDD=±2.5 V VDD=±5 V % 15 % 15 − − s s er er plifi plifi m m A 10 A 10 of of e e g g a a nt nt e e c c er 5 er 5 P P 0 0 −1.6 −1.2 −0.8 −0.4 0 0.4 0.8 1.2 1.6 −1.6 −1.2 −0.8 −0.4 0 0.4 0.8 1.2 1.6 VIO−InputOffsetVoltage−mV VIO−InputOffsetVoltage−mV Figure3.DistributionofTLC2274-Q1InputOffsetVoltage Figure4.DistributionofTLC2274-Q1InputOffsetVoltage 1 1 VDD= 5V VDD=±5 V TA= 25°C TA= 25°C RS= 50Ω RS= 50Ω V V m m 0.5 0.5 − − e e g g a a olt olt V V set 0 set 0 Off Off ut ut p p n n I I − − OO −0.5 OO −0.5 VIVI VVII −1 −1 −1 0 1 2 3 4 5 −6 −5 −4 −3 −2 −1 0 1 2 3 4 5 VIC−Common-Mode Voltage−V VIC−Common-Mode Voltage−V Figure5.InputOffsetVoltagevsCommon-ModeVoltage Figure6.InputOffsetVoltagevsCommon-ModeVoltage 12 SubmitDocumentationFeedback Copyright©2003–2016,TexasInstrumentsIncorporated ProductFolderLinks:TLC2272-Q1 TLC2272A-Q1 TLC2274-Q1 TLC2274A-Q1

TLC2272-Q1,TLC2272A-Q1,TLC2274-Q1,TLC2274A-Q1 www.ti.com SGLS007F–FEBRUARY2003–REVISEDMARCH2016 25 25 128Amplifiers From 128Amplifiers From 2WaferLots 2WaferLots VDD=±2.5 V VDD=±5 V 20 PPackage 20 PPackage % % − 25°C to 125°C − 25°C to 125°C s s er er plifi 15 plifi 15 m m A A of of ge 10 ge 10 a a nt nt e e c c er er P 5 P 5 0 0 −5 −4 −3 −2 −1 0 1 2 3 4 5 −5 −4 −3 −2 −1 0 1 2 3 4 5 αVIO−TemperatureCoefficient−µV/°C αVIO−TemperatureCoefficient−µV/°C Figure7.DistributionofTLC2272-Q1vs Figure8.DistributionofTLC2272-Q1vs InputOffsetVoltageTemperatureCoefficient InputOffsetVoltageTemperatureCoefficient 25 25 128Amplifiers From 128Amplifiers From 2WaferLots 2WaferLots 20 VDD=±2.5 V 20 VDD=±2.5 V % N Package % N Package − TA= 25°C to 125°C − TA= 25°C to 125°C s s er er plifi 15 plifi 15 m m A A of of ge 10 ge 10 a a nt nt e e c c er er P 5 P 5 0 0 −5 −4 −3 −2 −1 0 1 2 3 4 5 −5 −4 −3 −2 −1 0 1 2 3 4 5 αVIO−TemperatureCoefficient−µV/°C αVIO−TemperatureCoefficient−µV/°C Figure9.DistributionofTLC2274-Q1vs Figure10.DistributionofTLC2274-Q1vs InputOffsetVoltageTemperatureCoefficient InputOffsetVoltageTemperatureCoefficient A 12 Currents−p 3305 RVVVIODSCD=== = 5000 ±VVΩ2.5 V 1086 TRAS== 2550°CΩ Offset 25 −V 4 put 20 age 2 asandIn 15 IIB nput Volt −02 |VIO|≤5mV Bi IIO −I put 10 VI−4 n −I −6 IIOIIO 5 −8 d n BaB 0 −10 IIII 25 45 65 85 105 125 2 3 4 5 6 7 8 TA−Free-AirTemperature−°C |VDD±|−Supply Voltage−V Figure11.InputBiasandInputOffsetCurrentvs Figure12.InputVoltagevsSupplyVoltage Free-AirTemperature Copyright©2003–2016,TexasInstrumentsIncorporated SubmitDocumentationFeedback 13 ProductFolderLinks:TLC2272-Q1 TLC2272A-Q1 TLC2274-Q1 TLC2274A-Q1

TLC2272-Q1,TLC2272A-Q1,TLC2274-Q1,TLC2274A-Q1 SGLS007F–FEBRUARY2003–REVISEDMARCH2016 www.ti.com 5 6 VDD= 5 V VDD= 5 V 4 V 5 − e g a −V 3 Volt 4 oltage 2 |VIO|≤5mV Output 3 TA= 125°C put V evel TA= 25°C −In 1 gh-L 2 VI Hi TA=−55°C − 0 V0HVOH 1 −1 0 −75 −50 −25 0 25 50 75 100 125 0 1 2 3 4 TA−Free-AirTemperature−°C IOH−High-Level Output Current−mA Figure13.InputVoltagevsFree-AirTemperature Figure14.High-LevelOutputVoltagevs High-LevelOutputCurrent 1.2 1.4 VDD= 5 V VDD= 5 V TA= 25°C VIC= 2.5 V V 1 V 1.2 − − Voltage 0.8 VIC= 0 V Voltage 1 TA= 125°C utput VIC= 1.25 V utput 0.8 TA= 25°C O 0.6 O w-Level 0.4 w-Level 0.6 TA=−55°C Lo VIC= 2.5 V Lo 0.4 − − VOLVOL 0.2 VOLVOL 0.2 0 0 0 1 2 3 4 5 0 1 2 3 4 5 6 IOL−Low-Level Output Current−mA IOL−Low-Level Output Current−mA Figure15.Low-LevelOutputVoltagevs Figure16.Low-LevelOutputVoltagevs Low-LevelOutputCurrent Low-LevelOutputCurrent V 5 V −3.8 − VDD±=±5 V − VDD=±5 V OutputVoltage 4 TA=−55°C OutputVoltage −4−.42 VIC= 0 VTTAA== 2 152°C5°C ositivePeak 3 TTAA== 2152°5C°C egativePeak −4.4 TA=−55°C P N −4.6 m m u u m 2 m Maxi Maxi −4.8 − − + − OM 1 OM −5 V 0 1 2 3 4 5 V 0 1 2 3 4 5 6 |IO|−Output Current−mA IO−Output Current−mA Figure17.MaximumPositivePeakOutputVoltagevs Figure18.MaximumPositivePeakOutputVoltagevs OutputCurrent OutputCurrent 14 SubmitDocumentationFeedback Copyright©2003–2016,TexasInstrumentsIncorporated ProductFolderLinks:TLC2272-Q1 TLC2272A-Q1 TLC2274-Q1 TLC2274A-Q1

TLC2272-Q1,TLC2272A-Q1,TLC2274-Q1,TLC2274A-Q1 www.ti.com SGLS007F–FEBRUARY2003–REVISEDMARCH2016 V 10 16 ge− 9 RTAL== 2150°CkΩ A VID=−100mV Volta 8 −m 12 utput 7 urrent 8 O C o-Peak 65 VDD= 5 V Output 4 Peak-t 4 VDD=±5 V Circuit 0 mum 3 hort- VID= 100 mV xi 2 S Ma S−S −4 − 1 OO VO= 0 V OPP)O(PP) 0 II −8 TA= 25°C V(V 10k 100k 1M 10 M 2 3 4 5 6 7 8 f−Frequency−Hz |VDD±|−Supply Voltage−V Figure19.MaximumPeak-to-PeakOutputVoltagevs Figure20.Short-CircuitOutputCurrentvsSupplyVoltage Frequency 15 5 mA VID=−100mV VVDOD= =0 ±V5 V VTRADLD== =215 05° CkVΩ nt− 11 4 VIC= 2.5 V urre −V C e utput 7 Voltag 3 ort-CircuitO −3 V−Output O 2 h S −1 S−S VID= 100 mV 1 OO II −5 0 −75 −50 −25 0 25 50 75 100 125 −800 −400 0 400 800 1200 TA−Free-AirTemperature−°C VID−DifferentialInputVoltage−µV Figure21.Short-CircuitOutputCurrentvs Figure22.OutputVoltagevsDifferentialInputVoltage Free-AirTemperature 5 1000 VDD=±5 V TA= 25°C VO=±1 V RL= 10kΩ TA= 25°C 3 VIC= 0 V al Output Voltage−V −11 arge-Signal DifferentigeAmplification−dB 11000 VDD=±5 V VDD= 5 V V−O AVD−LAVDVolta 1 −3 0.1 −5 −1000−750 −500 −250 0 250 500 750 1000 0.1 1 10 100 VID−DifferentialInputVoltage−µV RL−Load Resistance−kΩ Figure23.OutputVoltagevsDifferentialInputVoltage Figure24.Large-SignalDifferentialVoltageAmplificationvs LoadResistance Copyright©2003–2016,TexasInstrumentsIncorporated SubmitDocumentationFeedback 15 ProductFolderLinks:TLC2272-Q1 TLC2272A-Q1 TLC2274-Q1 TLC2274A-Q1

TLC2272-Q1,TLC2272A-Q1,TLC2274-Q1,TLC2274A-Q1 SGLS007F–FEBRUARY2003–REVISEDMARCH2016 www.ti.com 80 180° 80 180° VDD= 5 V VDD=±5 V RL=10kΩ RL=10kΩ 60 CL= 100 pF 135° 60 CL= 100 pF 135° AVD−Large-Signal DifferentialAVDVoltageAmplification−dB −2240000 TA= 25°C −04950°4°°5° φom−Phase Marginm AVD−Large-Signal DifferentialAVDVoltageAmplification−dB −2420000 TA= 25°C −04950°4°°5° φom−Phase Marginm −40 −90° −40 −90° 1 k 10 k 100 k 1 M 10 M 1 k 10 k 100 k 1 M 10 M f−Frequency−Hz f−Frequency−Hz Figure25.Large-SignalDifferentialVoltageAmplification Figure26.Large-SignalDifferentialVoltageAmplification andPhaseMarginvsFrequency andPhaseMarginvsFrequency 1k 1k VDD=5V VDD=±5 V VIC= 2.5 V VIC= 0 V VO= 1 V to 4 V VO=±4 V alV alV erenti−V/m erenti−V/m RL= 1 MΩ Diffon RL= 1 MΩ Diffon al ati al ati e-Signmplific100 e-Signmplific100 AVD−LargAVDVoltageA RL=10kΩ AVD−LargAVDVoltageA RL=10kΩ 10 10 −75 −50 −25 0 25 50 75 100 125 −75 −50 −25 0 25 50 75 100 125 TA−Free-AirTemperature−°C TA−Free-AirTemperature−°C Figure27.Large-SignalDifferentialVoltageAmplificationvs Figure28.Large-SignalDifferentialVoltageAmplificationvs Free-AirTemperature Free-AirTemperature 1000 1000 VDD= 5 V VDD=±5 V TA= 25°C TA= 25°C ΩO 100 ΩO 100 − − ance AV= 100 ance AV= 100 d d e e p p m 10 m 10 put I AV= 10 put I Out Out AV= 10 − − zozo 1 AV= 1 zozo 1 AV= 1 0.1 0.1 100 1k 10k 100k 1M 100 1k 10k 100k 1M f−Frequency−Hz f−Frequency−Hz Figure29.OutputImpedancevsFrequency Figure30.OutputImpedancevsFrequency 16 SubmitDocumentationFeedback Copyright©2003–2016,TexasInstrumentsIncorporated ProductFolderLinks:TLC2272-Q1 TLC2272A-Q1 TLC2274-Q1 TLC2274A-Q1

TLC2272-Q1,TLC2272A-Q1,TLC2274-Q1,TLC2274A-Q1 www.ti.com SGLS007F–FEBRUARY2003–REVISEDMARCH2016 100 90 B TA= 25°C B d d − VDD=±5 V − o o ati 80 ati 86 R R on VDD= 5 V on cti cti Reje 60 Reje 82 VDD=±5 V e e od od VIC=−5 V to 2.7 V M M n- 40 n- 78 o o m m om om VDD= 5 V C C R− 20 R− 74 VIC= 0 V to 2.7 V R R M M C C 0 70 10 100 1k 10k 100 k 1 M 10 M −75 −50 −25 0 25 50 75 100 125 f−Frequency−Hz TA−Free-AirTemperature−°C Figure31.Common-ModeRejectionRatiovsFrequency Figure32.Common-ModeRejectionRatiovs Free-AirTemperature 100 100 B VDD= 5 V B VDD=±5 V d TA= 25°C d TA= 25°C − − o 80 o 80 ati ati R R n n ectio 60 kSVR+ ectio 60 kSVR+ ej ej R R e 40 e 40 g g a a Volt kSVR− Volt kSVR− y- 20 y- 20 pl pl p p u u S S R−R 0 R−R 0 VV VV SS SS kk kk −20 −20 10 100 1k 10 k 100 k 1 M 10 M 10 100 1k 10k 100k 1M 10 M f−Frequency−Hz f−Frequency−Hz Figure33.Supply-VoltageRejectionRatiovsFrequency Figure34.Supply-VoltageRejectionRatiovsFrequency 110 3 B VDD±=±2.2 V to±8 V VO= 0 V d VO= 0 V No Load − Ratio 105 A 2.4 n m Rejectio 100 urrent− 1.8 TA= 25°C Voltage 95 upply C 1.2 TA=−55°C ply −S TA= 125°C p DD u DD −S 90 II 0.6 RR VV SS kk 85 0 −75 −50 −25 0 25 50 75 100 125 0 1 2 3 4 5 6 7 8 TA−Free-AirTemperature−°C |VDD±|−Supply Voltage−V Figure35.Supply-VoltageRejectionRatiovs Figure36.TLC2272-Q1SupplyCurrentvsSupplyVoltage Free-AirTemperature Copyright©2003–2016,TexasInstrumentsIncorporated SubmitDocumentationFeedback 17 ProductFolderLinks:TLC2272-Q1 TLC2272A-Q1 TLC2274-Q1 TLC2274A-Q1

TLC2272-Q1,TLC2272A-Q1,TLC2274-Q1,TLC2274A-Q1 SGLS007F–FEBRUARY2003–REVISEDMARCH2016 www.ti.com 6 3 VO= 0 V VDD=±5 V No Load VO= 0 V 4.8 2.4 A A m m Current− 3.6 TA= 25°C Current− 1.8 VVDOD= =2 .55 VV −Supply 2.4 TA= 1T2A5°=C−55°C −Supply 1.2 DD DD DD DD II 1.2 II 0.6 0 0 0 1 2 3 4 5 6 7 8 −75 −50 −25 0 25 50 75 100 125 |VDD±|−Supply Voltage−V TA−Free-AirTemperature−°C Figure37.TLC2274-Q1SupplyCurrentvsSupplyVoltage Figure38.TLC2272-Q1SupplyCurrentvsFree-Air Temperature 6 5 VVDOD= =0 ±V5 V VATAVDD== =2−5 15° CV 4.8 4 A ent−m 3.6 VVDOD= =2 .55 VV −V/sµ 3 SR− Curr Rate ply ew up 2.4 Sl 2 S − SR+ − R DD S DD II 1.2 1 0 0 −75 −50 −25 0 25 50 75 100 125 10 100 1 k 10 k TA−Free-AirTemperature−°C CL−Load Capacitance−pF Figure39.TLC2274-Q1SupplyCurrentvsFree-Air Figure40.SlewRatevsLoadCapacitance Temperature 5 5 VDD= 5 V RL= 10 kΩ SR− CL= 100 pF 4 4 TA= 25°C s mV AV=−1 V/µ SR + e− − 3 ag 3 Rate Volt w ut Sle 2 utp 2 − O R − S OO VV 1 VDD= 5 V 1 RL= 10 kΩ CL= 100 pF AV= 1 0 0 −75 −50 −25 0 25 50 75 100 125 0 1 2 3 4 5 6 7 8 9 TA−Free-AirTemperature−°C t−Time−µs Figure41.SlewRatevsFree-AirTemperature Figure42.InvertingLarge-SignalPulseResponse 18 SubmitDocumentationFeedback Copyright©2003–2016,TexasInstrumentsIncorporated ProductFolderLinks:TLC2272-Q1 TLC2272A-Q1 TLC2274-Q1 TLC2274A-Q1

TLC2272-Q1,TLC2272A-Q1,TLC2274-Q1,TLC2274A-Q1 www.ti.com SGLS007F–FEBRUARY2003–REVISEDMARCH2016 5 5 VDD=±5 V VDD= 5 V 4 RL= 10 kΩ RL= 10 kΩ CL= 100 pF CL= 100 pF 3 TA= 25°C 4 AV= 1 V AV=−1 V TA= 25°C − 2 − Voltage 1 Voltage 3 Output −01 Output 2 − − OO −2 OO VV VV −3 1 −4 −5 0 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 t−Time−µs t−Time−µs Figure43.InvertingLarge-SignalPulseResponse Figure44.Voltage-FollowerLarge-SignalPulseResponse 5 2.65 VDD=±5 V VDD= 5 V 4 RL= 10 kΩ RL= 10 kΩ CL= 100 pF CL= 100 pF 3 TA= 25°C 2.6 TA= 25°C V AV= 1 V AV=−1 − 2 − e e g g olta 1 olta 2.55 V V ut 0 ut p p Out −1 Out 2.5 − − OO −2 OO VV VV −3 2.45 −4 −5 2.4 0 1 2 3 4 5 6 7 8 9 0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 5 5.5 t−Time−µs t−Time−µs Figure45.Voltage-FollowerLarge-SignalPulseResponse Figure46.InvertingSmall-SignalPulseResponse 100 2.65 VDD=±5 V VDD= 5 V RL= 10 kΩ RL= 10 kΩ CL= 100 pF CL= 100 pF TA= 25°C 2.6 TA= 25°C mV 50 AV= 1 V AV= 1 OutputVoltage− 0 OutputVoltage− 22.5.55 VVO−O −50 VVO−O 2.45 −100 2.4 0 0.5 1 1.5 2 2.5 3 3.5 4 0 0.5 1 1.5 t−Time−µs t−Time−µs Figure47.InvertingSmall-SignalPulseResponse Figure48.Voltage-FollowerSmall-SignalPulseResponse Copyright©2003–2016,TexasInstrumentsIncorporated SubmitDocumentationFeedback 19 ProductFolderLinks:TLC2272-Q1 TLC2272A-Q1 TLC2274-Q1 TLC2274A-Q1

TLC2272-Q1,TLC2272A-Q1,TLC2274-Q1,TLC2274A-Q1 SGLS007F–FEBRUARY2003–REVISEDMARCH2016 www.ti.com 100 60 VRCTADLLD=== 211=500±°0 kC5 Ωp VF −nV HznV/Hz VTRADSD== 2=250 5°CΩ V mV 50 AV= 1 age − olt 40 e V oltag oise −OutputV 0 ent Input N 2300 VVOO −50 uival Eq 10 − nn VV −100 0 0 0.5 1 1.5 10 100 1k 10 k t−Time−µs f−Frequency−Hz Figure49.Voltage-FollowerSmall-SignalPulseResponse Figure50.EquivalentInputNoiseVoltagevsFrequency 60 1000 nV HznV/Hz VTRADSD== 2=250±°CΩ5 V 750 VfT A=D D0=. 1=2 5 H5° zCV to 10 Hz − ge 500 a ut Noise Volt 3400 Voltage−nV 2500 ent Inp 20 Noise −250 al uiv −500 Eq 10 − −750 nn VV 0 −1000 10 100 1k 10 k 0 2 4 6 8 10 f−Frequency−Hz t−Time−s Figure51.EquivalentInputNoiseVoltagevsFrequency Figure52.NoiseVoltageOvera10SecondPeriod 100 % 1 VRMSVRMS CILTdAoaew=lac leu2 rP5l aaF°tCsreesdq-BUuaesnnindcg yF =il t1e rHz PlusNoise− 0.1 VTRADLD== =215 05° kCVΩ µ−u 10 on Voltage Distorti 0.01 AV= 100 se nic Noi mo AV= 10 ed 1 Har Integrat −Total 0.001 AV= 1 N + D 0.1 TH 0.0001 1 10 100 1k 10k 100k 100 1k 10k 100k f−Frequency−Hz f−Frequency−Hz Figure53.IntegratedNoiseVoltagevsFrequency Figure54.TotalHarmonicDistortion+NoisevsFrequency 20 SubmitDocumentationFeedback Copyright©2003–2016,TexasInstrumentsIncorporated ProductFolderLinks:TLC2272-Q1 TLC2272A-Q1 TLC2274-Q1 TLC2274A-Q1

TLC2272-Q1,TLC2272A-Q1,TLC2274-Q1,TLC2274A-Q1 www.ti.com SGLS007F–FEBRUARY2003–REVISEDMARCH2016 2.5 3 f=10kHz VDD= 5 V RCLL== 11000 k ΩpF 2.8 fR =L 1=0 1 k0H kzΩ Hz 2.4 TA= 25°C Hz CL= 100 pF M M 2.6 − − Product 2.3 Product 2.4 width 2.2 width 2.2 Band Band 2 Gain- 2.1 Gain- 1.8 1.6 2 1.4 0 1 2 3 4 5 6 7 8 −75 −50 −25 0 25 50 75 100 125 |VDD±|−Supply Voltage−V TA−Free-AirTemperature−°C Figure55.Gain-BandwidthProductvsSupplyVoltage Figure56.Gain-BandwidthProductvsFree-AirTemperature 75° 15 VDD=±5 V VDD= 5 V TA= 25°C AV= 1 Rnull= 100Ω RL= 10 kΩ 60° 12 TA= 25°C argin 45° Rnull= 50Ω −dB 9 hase M Rnull= 20Ω Margin m−Pm 30° Gain 6 φo 10kΩ 15° VI 10 kΩ VDD+Rnull Rnull= 0 3 CL Rnull= 10Ω 0° VDD− 0 10 100 1000 10000 10 100 1000 10000 CL−Load Capacitance−pF CL−Load Capacitance−pF Figure57.PhaseMarginvsLoadCapacitance Figure58.GainMarginvsLoadCapacitance Copyright©2003–2016,TexasInstrumentsIncorporated SubmitDocumentationFeedback 21 ProductFolderLinks:TLC2272-Q1 TLC2272A-Q1 TLC2274-Q1 TLC2274A-Q1

TLC2272-Q1,TLC2272A-Q1,TLC2274-Q1,TLC2274A-Q1 SGLS007F–FEBRUARY2003–REVISEDMARCH2016 www.ti.com 7 Detailed Description 7.1 Overview The TLC227x-Q1 devices are a rail-to-rail output operational amplifiers. These devices operate from 4.4-V to 16- V single supply and ±2.2-V ±8-V dual supply, are unity-gain stable, and are suitable for a wide range of general- purposeapplications. 7.2 Functional Block Diagram VDD+ Q3 Q6 Q9 Q12 Q14 Q16 IN+ OUT C1 IN− R5 Q1 Q4 Q13 Q15 Q17 D1 Q2 Q5 Q7 Q8 Q10 Q11 R3 R4 R1 R2 VDD− Table2.ActualDeviceComponentCount(1) COMPONENT TLC2272-Q1 TLC2274-Q1 Transistors 38 76 Resistors 26 52 Diodes 9 18 Capacitors 3 6 (1) IncludesbothamplifiersandallESD,bias,andtrimcircuitry 7.3 Feature Description The TLC227x-Q1 family features 2-MHz bandwidth and voltage noise of 9 nV/√Hz with performance rated from 4.4 V to 16 V across an automotive temperature range (–40°C to 125°C). LinMOS suits a wide range of audio, automotive,industrial,andinstrumentationapplications. 7.4 Device Functional Modes The TLC227x-Q1 family of devices is powered on when the supply is connected. The device can operate with singleordualsupply,dependingontheapplication.Thedeviceisinitsfullperformanceoncethesupplyisabove therecommendedvalue. 22 SubmitDocumentationFeedback Copyright©2003–2016,TexasInstrumentsIncorporated ProductFolderLinks:TLC2272-Q1 TLC2272A-Q1 TLC2274-Q1 TLC2274A-Q1

TLC2272-Q1,TLC2272A-Q1,TLC2274-Q1,TLC2274A-Q1 www.ti.com SGLS007F–FEBRUARY2003–REVISEDMARCH2016 8 Application and Implementation NOTE Information in the following applications sections is not part of the TI component specification, and TI does not warrant its accuracy or completeness. TI’s customers are responsible for determining suitability of components for their purposes. Customers should validateandtesttheirdesignimplementationtoconfirmsystemfunctionality. 8.1 Application Information 8.1.1 MacromodelInformation Macromodel information provided was derived using MicroSim Parts™, the model generation software used with MicroSim PSpice™. The Boyle macromodel (see Related Documentation for more information) and subcircuit in Figure 59 were generated using the TLC227x typical electrical and operating characteristics at T = 25°C. Using A this information, output simulations of the following key parameters can be generated to a tolerance of 20% (in mostcases): • Unitygainfrequency • Maximumpositiveoutputvoltageswing • Common-moderejectionratio • Maximumnegativeoutputvoltageswing • Phasemargin • Slewrate • DCoutputresistance • Quiescentpowerdissipation • ACoutputresistance • Inputbiascurrent • Short-circuitoutputcurrentlimit • Open-loopvoltageamplification 99 DIN 3 EGND + VCC+ 92 9 FB RSS ISS + − 90 91 RP + − VB RHOL2IM + DIP +VIP − VIN IN− 2 10 VC R2 − − + DP J1 J2 − 6 C2 7 IN+ 53 + 1 VLIM 11 12 DC GCM GA − 8 C1 RD1 RD2 60 RO1 VAD +− 54 DE 5 VCC− 4 − + VE OUT .SUBCKTTLC227x 1 2 3 4 5 RD1 60 112.653E3 C1 11 1214E−12 RD2 60 122.653E3 C2 6 760.00E−12 R01 8 550 DC 5 53DX R02 7 9950 DE 54 5DX RP 3 44.310E3 DLP 90 91DX RSS 10 99925.9E3 DLN 92 90DX VAD 60 4−.5 DP 4 3DX VB 9 0DC 0 EGND 99 0POLY(2) (3,0) (4,) 0 .5 .5 VC 3 53 DC .78 FB 99 0POLY(5) VB VC VE VLPVLN 0 VE 54 4DC .78 + 984.9E3−1E6 1E6 1E6−1E6 VLIM 7 8DC 0 GA 6 011 12 377.0E−6 VLP 91 0DC 1.9 GCM 0 6 10 99 134E−9 VLN 0 92DC 9.4 ISS 3 10DC 216.OE−6 .MODELDX D (IS=800.0E−18) HLIM 90 0VLIM 1K .MODELJX PJF (IS=1.500E−12BETA=1.316E-3 J1 11 210 JX + VTO=−.270) J2 12 110 JX .ENDS R2 6 9100.OE3 Figure59. BoyleMacromodelsandSubcircuit Copyright©2003–2016,TexasInstrumentsIncorporated SubmitDocumentationFeedback 23 ProductFolderLinks:TLC2272-Q1 TLC2272A-Q1 TLC2274-Q1 TLC2274A-Q1

TLC2272-Q1,TLC2272A-Q1,TLC2274-Q1,TLC2274A-Q1 SGLS007F–FEBRUARY2003–REVISEDMARCH2016 www.ti.com 8.2 Typical Application 8.2.1 High-SideCurrentMonitor V BAT I LOUD V V 1 2 R S 0.1 µF R1 R I LOAD VOUT + _ R 2 47 kΩ R g Figure60. EquivalentSchematic(EachAmplifier) 8.2.1.1 DesignRequirements Forthisdesignexample,usetheseparameterslistedinTable3astheinputparameters. Table3.DesignParameters PARAMETER VALUE V BatteryVoltage 12V BAT R SenseResistor 0.1Ω SENSE I LoadCurrent 0Ato10A LOAD OperationalAmplifier SetinDifferentialconfigurationwithGain=10 8.2.1.2 DetailedDesignProcedure This circuit is designed for measuring the high-side current in automotive body control modules with a 12-V batteryorsimilarapplications.Theoperationalamplifierissetasdifferentialwithanexternalresistornetwork. 8.2.1.2.1 DifferentialAmplifierEquations Equation1andEquation2areusedtocalculateV . OUT æ æ ö ö R R 1 R R ç - 1 1+ ç 1 + ÷ ÷ V = RgççRg R2 ´V1+V2 + 2çèR2 Rg ÷ø(V -V )÷÷ OUT R ç 1+ R1 2 1+ R1 1 2 ÷ çç R R ÷÷ 2 2 è ø (1) æ æ ö ö R R 1 R R ç - 1 1+ ç 1 + ÷ ÷ V = RgççRg R2 ´V + 2çèR2 Rg ÷ø´R ´I ÷÷ OUT R ç 1+ R1 BAT 1+ R1 S Load÷ çç R R ÷÷ 2 2 è ø (2) InanidealcaseR =RandR =R ,andV canthenbecalculatedusingEquation3: 1 2 g OUT R V = g ´R ´I OUT S Load R (3) 24 SubmitDocumentationFeedback Copyright©2003–2016,TexasInstrumentsIncorporated ProductFolderLinks:TLC2272-Q1 TLC2272A-Q1 TLC2274-Q1 TLC2274A-Q1

TLC2272-Q1,TLC2272A-Q1,TLC2274-Q1,TLC2274A-Q1 www.ti.com SGLS007F–FEBRUARY2003–REVISEDMARCH2016 However,astheresistorshavetolerances,theycannotbeperfectlymatched. R =R± ΔR 1 1 R =R ±ΔR 2 2 2 R=R± ΔR R =R ±ΔR g g g DR Tol= R (4) By developing the equations and neglecting the second order, the worst case is when the tolerances add up. ThisisshownbyEquation5. V =±(4Tol) Rg ´V +æç1±2Tolæç1+ 2R ö÷ö÷Rg ´R ´I OUT R+R BAT ç ç R+R ÷÷ R S LOAD g è è g øø where • Tol=0.01for1% • Tol=0.001for0.1% (5) Iftheresistorsareperfectlymatched,thenTol=0andV iscalculatedusingEquation6. OUT R V = g ´R ´I OUT S LOAD R (6) Thehighesterrorisfromthecommonmode: R 4(Tol) g ´V R+R BAT g (7) Gainof10,R /R=10,andTol=1%: g Commonmodeerror=((4×0.01)/1.1) × 12V=0.436V Gainof10andTol=0.1%: Commonmodeerror=43.6mV Theresistorswerechosenfrom2%batches. R andR12kΩ 1 R andR 120kΩ 2 g IdealGain=120/12=10 Themeasuredvalueoftheresistors: R =11.835kΩ 1 R=11.85kΩ R =117.92kΩ 2 R =118.07kΩ g Copyright©2003–2016,TexasInstrumentsIncorporated SubmitDocumentationFeedback 25 ProductFolderLinks:TLC2272-Q1 TLC2272A-Q1 TLC2274-Q1 TLC2274A-Q1

TLC2272-Q1,TLC2272A-Q1,TLC2274-Q1,TLC2274A-Q1 SGLS007F–FEBRUARY2003–REVISEDMARCH2016 www.ti.com 8.2.1.3 ApplicationCurves 1.2 12 1 10 V) 0.8 V) 8 e ( e ( g g a a olt 0.6 olt 6 V V ut ut p p ut 0.4 ut 4 O O 0.2 2 Measured Measured Ideal Ideal 0 0 0 0.2 0.4 0.6 0.8 1 1.2 0 2 4 6 8 10 12 Load Current (A) Load Current (A) D001 D001 Figure61.OutputVoltageMeasuredvsIdeal Figure62.OutputVoltageMeasuredvsIdeal (0to1A) (0to10A) 26 SubmitDocumentationFeedback Copyright©2003–2016,TexasInstrumentsIncorporated ProductFolderLinks:TLC2272-Q1 TLC2272A-Q1 TLC2274-Q1 TLC2274A-Q1

TLC2272-Q1,TLC2272A-Q1,TLC2274-Q1,TLC2274A-Q1 www.ti.com SGLS007F–FEBRUARY2003–REVISEDMARCH2016 9 Power Supply Recommendations Supplyvoltageis4.4Vto16Vforsinglesupplyand ±2.2Vto ±8Vfordual.Inthehigh-sidesensingapplication, thesupplyisconnectedtoa12-Vbattery. 10 Layout 10.1 Layout Guidelines The TLC227x-Q1 is a wideband amplifier. To realize the full operational performance of the device, good high frequency printed-circuit-board (PCB) layout practices are required. Low-loss 0.1-μF bypass capacitors must be connected between each supply pin and ground as close to the device as possible. The bypass capacitor traces mustbedesignedforminimuminductance. 10.2 Layout Examples RIN VIN + RG VOUT – RF Figure63. SchematicRepresentation Place components Run the input traces close to device and to as far away from each other to reduce the supply lines parasitic errors RF VS+ as possible NC NC RG GND –IN V+ GND VIN +IN OUT RIN V– NC Use low-ESR ceramic bypass capacitor Only needed for dual-supply GND VS– VOUT operation (or GND for single supply) Ground (GND) plane on another layer Figure64. OperationalAmplifierBoardLayoutforNoninvertingConfiguration Copyright©2003–2016,TexasInstrumentsIncorporated SubmitDocumentationFeedback 27 ProductFolderLinks:TLC2272-Q1 TLC2272A-Q1 TLC2274-Q1 TLC2274A-Q1

TLC2272-Q1,TLC2272A-Q1,TLC2274-Q1,TLC2274A-Q1 SGLS007F–FEBRUARY2003–REVISEDMARCH2016 www.ti.com 11 Device and Documentation Support 11.1 Documentation Support 11.1.1 RelatedDocumentation Forrelateddocumentationseethefollowing: Macromodeling of Integrated Circuit Operational Amplifiers, IEEE Journal of Solid-State Circuits, SC-9, 353 (1974). 11.2 Related Links The table below lists quick access links. Categories include technical documents, support and community resources,toolsandsoftware,andquickaccesstosampleorbuy. Table4.RelatedLinks TECHNICAL TOOLS& SUPPORT& PARTS PRODUCTFOLDER SAMPLE&BUY DOCUMENTS SOFTWARE COMMUNITY TLC2272-Q1 Clickhere Clickhere Clickhere Clickhere Clickhere TLC2272A-Q1 Clickhere Clickhere Clickhere Clickhere Clickhere TLC2274-Q1 Clickhere Clickhere Clickhere Clickhere Clickhere TLC2274A-Q1 Clickhere Clickhere Clickhere Clickhere Clickhere 11.3 Community Resources The following links connect to TI community resources. Linked contents are provided "AS IS" by the respective contributors. They do not constitute TI specifications and do not necessarily reflect TI's views; see TI's Terms of Use. TIE2E™OnlineCommunity TI'sEngineer-to-Engineer(E2E)Community.Createdtofostercollaboration amongengineers.Ate2e.ti.com,youcanaskquestions,shareknowledge,exploreideasandhelp solveproblemswithfellowengineers. DesignSupport TI'sDesignSupport QuicklyfindhelpfulE2Eforumsalongwithdesignsupporttoolsand contactinformationfortechnicalsupport. 11.4 Trademarks AdvancedLinCMOS,E2EaretrademarksofTexasInstruments. MicroSimParts,PSpicearetrademarksofMicroSim. Allothertrademarksarethepropertyoftheirrespectiveowners. 11.5 Electrostatic Discharge Caution Thesedeviceshavelimitedbuilt-inESDprotection.Theleadsshouldbeshortedtogetherorthedeviceplacedinconductivefoam duringstorageorhandlingtopreventelectrostaticdamagetotheMOSgates. 11.6 Glossary SLYZ022—TIGlossary. Thisglossarylistsandexplainsterms,acronyms,anddefinitions. 12 Mechanical, Packaging, and Orderable Information The following pages include mechanical, packaging, and orderable information. This information is the most current data available for the designated devices. This data is subject to change without notice and revision of thisdocument.Forbrowser-basedversionsofthisdatasheet,refertotheleft-handnavigation. 28 SubmitDocumentationFeedback Copyright©2003–2016,TexasInstrumentsIncorporated ProductFolderLinks:TLC2272-Q1 TLC2272A-Q1 TLC2274-Q1 TLC2274A-Q1

PACKAGE OPTION ADDENDUM www.ti.com 6-Feb-2020 PACKAGING INFORMATION Orderable Device Status Package Type Package Pins Package Eco Plan Lead/Ball Finish MSL Peak Temp Op Temp (°C) Device Marking Samples (1) Drawing Qty (2) (6) (3) (4/5) TLC2272AQDRG4Q1 ACTIVE SOIC D 8 2500 Green (RoHS NIPDAU Level-1-260C-UNLIM -40 to 125 2272AQ & no Sb/Br) TLC2272AQDRQ1 ACTIVE SOIC D 8 2500 Green (RoHS NIPDAU Level-1-260C-UNLIM -40 to 125 2272AQ & no Sb/Br) TLC2272AQPWRG4Q1 ACTIVE TSSOP PW 8 2000 Green (RoHS NIPDAU Level-1-260C-UNLIM -40 to 125 2272AQ & no Sb/Br) TLC2272AQPWRQ1 ACTIVE TSSOP PW 8 2000 Green (RoHS NIPDAU Level-1-260C-UNLIM -40 to 125 2272AQ & no Sb/Br) TLC2272QDRG4Q1 ACTIVE SOIC D 8 2500 Green (RoHS NIPDAU Level-1-260C-UNLIM -40 to 125 2272Q1 & no Sb/Br) TLC2272QDRQ1 ACTIVE SOIC D 8 2500 Green (RoHS NIPDAU Level-1-260C-UNLIM -40 to 125 2272Q1 & no Sb/Br) TLC2272QPWRG4Q1 ACTIVE TSSOP PW 8 2000 Green (RoHS NIPDAU Level-1-260C-UNLIM -40 to 125 2272Q1 & no Sb/Br) TLC2272QPWRQ1 ACTIVE TSSOP PW 8 2000 Green (RoHS NIPDAU Level-1-260C-UNLIM -40 to 125 2272Q1 & no Sb/Br) TLC2274AQDRG4Q1 ACTIVE SOIC D 14 2500 Green (RoHS NIPDAU Level-1-260C-UNLIM -40 to 125 2274AQ1 & no Sb/Br) TLC2274AQDRQ1 ACTIVE SOIC D 14 2500 Green (RoHS NIPDAU Level-1-260C-UNLIM -40 to 125 2274AQ1 & no Sb/Br) TLC2274AQPWRG4Q1 ACTIVE TSSOP PW 14 2000 Green (RoHS NIPDAU Level-1-260C-UNLIM -40 to 125 2274AQ1 & no Sb/Br) TLC2274AQPWRQ1 ACTIVE TSSOP PW 14 2000 Green (RoHS NIPDAU Level-1-260C-UNLIM -40 to 125 2274AQ1 & no Sb/Br) TLC2274QDRG4Q1 ACTIVE SOIC D 14 2500 Green (RoHS NIPDAU Level-1-260C-UNLIM -40 to 125 2274Q1 & no Sb/Br) TLC2274QDRQ1 ACTIVE SOIC D 14 2500 Green (RoHS NIPDAU Level-1-260C-UNLIM -40 to 125 2274Q1 & no Sb/Br) TLC2274QPWRG4Q1 ACTIVE TSSOP PW 14 2000 Green (RoHS NIPDAU Level-1-260C-UNLIM -40 to 125 2274Q1 & no Sb/Br) TLC2274QPWRQ1 ACTIVE TSSOP PW 14 2000 Green (RoHS NIPDAU Level-1-260C-UNLIM -40 to 125 2274Q1 & no Sb/Br) (1) The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. Addendum-Page 1

PACKAGE OPTION ADDENDUM www.ti.com 6-Feb-2020 LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. (2) RoHS: TI defines "RoHS" to mean semiconductor products that are compliant with the current EU RoHS requirements for all 10 RoHS substances, including the requirement that RoHS substance do not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, "RoHS" products are suitable for use in specified lead-free processes. TI may reference these types of products as "Pb-Free". RoHS Exempt: TI defines "RoHS Exempt" to mean products that contain lead but are compliant with EU RoHS pursuant to a specific EU RoHS exemption. Green: TI defines "Green" to mean the content of Chlorine (Cl) and Bromine (Br) based flame retardants meet JS709B low halogen requirements of <=1000ppm threshold. Antimony trioxide based flame retardants must also meet the <=1000ppm threshold requirement. (3) MSL, Peak Temp. - The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature. (4) There may be additional marking, which relates to the logo, the lot trace code information, or the environmental category on the device. (5) Multiple Device Markings will be inside parentheses. Only one Device Marking contained in parentheses and separated by a "~" will appear on a device. If a line is indented then it is a continuation of the previous line and the two combined represent the entire Device Marking for that device. (6) Lead/Ball Finish - Orderable Devices may have multiple material finish options. Finish options are separated by a vertical ruled line. Lead/Ball Finish values may wrap to two lines if the finish value exceeds the maximum column width. Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis. OTHER QUALIFIED VERSIONS OF TLC2272-Q1, TLC2272A-Q1, TLC2274-Q1, TLC2274A-Q1 : •Catalog: TLC2272, TLC2272A, TLC2274, TLC2274A •Enhanced Product: TLC2272A-EP, TLC2274-EP, TLC2274A-EP •Military: TLC2272M, TLC2272AM, TLC2274M, TLC2274AM NOTE: Qualified Version Definitions: Addendum-Page 2

PACKAGE OPTION ADDENDUM www.ti.com 6-Feb-2020 •Catalog - TI's standard catalog product •Enhanced Product - Supports Defense, Aerospace and Medical Applications •Military - QML certified for Military and Defense Applications Addendum-Page 3

PACKAGE MATERIALS INFORMATION www.ti.com 28-Jul-2018 TAPE AND REEL INFORMATION *Alldimensionsarenominal Device Package Package Pins SPQ Reel Reel A0 B0 K0 P1 W Pin1 Type Drawing Diameter Width (mm) (mm) (mm) (mm) (mm) Quadrant (mm) W1(mm) TLC2272AQPWRG4Q1 TSSOP PW 8 2000 330.0 12.4 7.0 3.6 1.6 8.0 12.0 Q1 TLC2272AQPWRQ1 TSSOP PW 8 2000 330.0 12.4 7.0 3.6 1.6 8.0 12.0 Q1 TLC2272QPWRG4Q1 TSSOP PW 8 2000 330.0 12.4 7.0 3.6 1.6 8.0 12.0 Q1 TLC2272QPWRQ1 TSSOP PW 8 2000 330.0 12.4 7.0 3.6 1.6 8.0 12.0 Q1 TLC2274AQPWRG4Q1 TSSOP PW 14 2000 330.0 12.4 6.9 5.6 1.6 8.0 12.0 Q1 TLC2274AQPWRQ1 TSSOP PW 14 2000 330.0 12.4 6.9 5.6 1.6 8.0 12.0 Q1 TLC2274QPWRG4Q1 TSSOP PW 14 2000 330.0 12.4 6.9 5.6 1.6 8.0 12.0 Q1 TLC2274QPWRQ1 TSSOP PW 14 2000 330.0 12.4 6.9 5.6 1.6 8.0 12.0 Q1 PackMaterials-Page1

PACKAGE MATERIALS INFORMATION www.ti.com 28-Jul-2018 *Alldimensionsarenominal Device PackageType PackageDrawing Pins SPQ Length(mm) Width(mm) Height(mm) TLC2272AQPWRG4Q1 TSSOP PW 8 2000 367.0 367.0 35.0 TLC2272AQPWRQ1 TSSOP PW 8 2000 367.0 367.0 35.0 TLC2272QPWRG4Q1 TSSOP PW 8 2000 367.0 367.0 35.0 TLC2272QPWRQ1 TSSOP PW 8 2000 367.0 367.0 35.0 TLC2274AQPWRG4Q1 TSSOP PW 14 2000 367.0 367.0 35.0 TLC2274AQPWRQ1 TSSOP PW 14 2000 367.0 367.0 35.0 TLC2274QPWRG4Q1 TSSOP PW 14 2000 367.0 367.0 35.0 TLC2274QPWRQ1 TSSOP PW 14 2000 367.0 367.0 35.0 PackMaterials-Page2

None

None

None

None

PACKAGE OUTLINE D0008A SOIC - 1.75 mm max height SCALE 2.800 SMALL OUTLINE INTEGRATED CIRCUIT C SEATING PLANE .228-.244 TYP [5.80-6.19] .004 [0.1] C A PIN 1 ID AREA 6X .050 [1.27] 8 1 2X .189-.197 [4.81-5.00] .150 NOTE 3 [3.81] 4X (0 -15 ) 4 5 8X .012-.020 B .150-.157 [0.31-0.51] .069 MAX [3.81-3.98] .010 [0.25] C A B [1.75] NOTE 4 .005-.010 TYP [0.13-0.25] 4X (0 -15 ) SEE DETAIL A .010 [0.25] .004-.010 0 - 8 [0.11-0.25] .016-.050 [0.41-1.27] DETAIL A (.041) TYPICAL [1.04] 4214825/C 02/2019 NOTES: 1. Linear dimensions are in inches [millimeters]. Dimensions in parenthesis are for reference only. Controlling dimensions are in inches. Dimensioning and tolerancing per ASME Y14.5M. 2. This drawing is subject to change without notice. 3. This dimension does not include mold flash, protrusions, or gate burrs. Mold flash, protrusions, or gate burrs shall not exceed .006 [0.15] per side. 4. This dimension does not include interlead flash. 5. Reference JEDEC registration MS-012, variation AA. www.ti.com

EXAMPLE BOARD LAYOUT D0008A SOIC - 1.75 mm max height SMALL OUTLINE INTEGRATED CIRCUIT 8X (.061 ) [1.55] SYMM SEE DETAILS 1 8 8X (.024) [0.6] SYMM (R.002 ) TYP [0.05] 5 4 6X (.050 ) [1.27] (.213) [5.4] LAND PATTERN EXAMPLE EXPOSED METAL SHOWN SCALE:8X SOLDER MASK SOLDER MASK METAL OPENING OPENING METAL UNDER SOLDER MASK EXPOSED METAL EXPOSED METAL .0028 MAX .0028 MIN [0.07] [0.07] ALL AROUND ALL AROUND NON SOLDER MASK SOLDER MASK DEFINED DEFINED SOLDER MASK DETAILS 4214825/C 02/2019 NOTES: (continued) 6. Publication IPC-7351 may have alternate designs. 7. Solder mask tolerances between and around signal pads can vary based on board fabrication site. www.ti.com

EXAMPLE STENCIL DESIGN D0008A SOIC - 1.75 mm max height SMALL OUTLINE INTEGRATED CIRCUIT 8X (.061 ) [1.55] SYMM 1 8 8X (.024) [0.6] SYMM (R.002 ) TYP [0.05] 5 4 6X (.050 ) [1.27] (.213) [5.4] SOLDER PASTE EXAMPLE BASED ON .005 INCH [0.125 MM] THICK STENCIL SCALE:8X 4214825/C 02/2019 NOTES: (continued) 8. Laser cutting apertures with trapezoidal walls and rounded corners may offer better paste release. IPC-7525 may have alternate design recommendations. 9. Board assembly site may have different recommendations for stencil design. www.ti.com

PACKAGE OUTLINE PW0008A TSSOP - 1.2 mm max height SCALE 2.800 SMALL OUTLINE PACKAGE C 6.6 TYP SEATING PLANE 6.2 PIN 1 ID A 0.1 C AREA 6X 0.65 8 1 3.1 2X 2.9 NOTE 3 1.95 4 5 0.30 8X 0.19 4.5 1.2 MAX B 0.1 C A B 4.3 NOTE 4 (0.15) TYP SEE DETAIL A 0.25 GAGE PLANE 0.15 0.75 0 - 8 0.05 0.50 DETAIL A TYPICAL 4221848/A 02/2015 NOTES: 1. All linear dimensions are in millimeters. Any dimensions in parenthesis are for reference only. Dimensioning and tolerancing per ASME Y14.5M. 2. This drawing is subject to change without notice. 3. This dimension does not include mold flash, protrusions, or gate burrs. Mold flash, protrusions, or gate burrs shall not exceed 0.15 mm per side. 4. This dimension does not include interlead flash. Interlead flash shall not exceed 0.25 mm per side. 5. Reference JEDEC registration MO-153, variation AA. www.ti.com

EXAMPLE BOARD LAYOUT PW0008A TSSOP - 1.2 mm max height SMALL OUTLINE PACKAGE 8X (1.5) 8X (0.45) SYMM (R0.05) 1 TYP 8 SYMM 6X (0.65) 5 4 (5.8) LAND PATTERN EXAMPLE SCALE:10X SOOPLEDNEINRG MASK METAL MSOELTDAEL RU NMDAESRK SOOPLEDNEINRG MASK 0.05 MAX 0.05 MIN ALL AROUND ALL AROUND NON SOLDER MASK SOLDER MASK DEFINED DEFINED SOLDER MASK DETAILS NOT TO SCALE 4221848/A 02/2015 NOTES: (continued) 6. Publication IPC-7351 may have alternate designs. 7. Solder mask tolerances between and around signal pads can vary based on board fabrication site. www.ti.com

EXAMPLE STENCIL DESIGN PW0008A TSSOP - 1.2 mm max height SMALL OUTLINE PACKAGE 8X (1.5) SYMM (R0.05) TYP 8X (0.45) 1 8 SYMM 6X (0.65) 5 4 (5.8) SOLDER PASTE EXAMPLE BASED ON 0.125 mm THICK STENCIL SCALE:10X 4221848/A 02/2015 NOTES: (continued) 8. Laser cutting apertures with trapezoidal walls and rounded corners may offer better paste release. IPC-7525 may have alternate design recommendations. 9. Board assembly site may have different recommendations for stencil design. www.ti.com

IMPORTANTNOTICEANDDISCLAIMER TI PROVIDES TECHNICAL AND RELIABILITY DATA (INCLUDING DATASHEETS), DESIGN RESOURCES (INCLUDING REFERENCE DESIGNS), APPLICATION OR OTHER DESIGN ADVICE, WEB TOOLS, SAFETY INFORMATION, AND OTHER RESOURCES “AS IS” AND WITH ALL FAULTS, AND DISCLAIMS ALL WARRANTIES, EXPRESS AND IMPLIED, INCLUDING WITHOUT LIMITATION ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY RIGHTS. These resources are intended for skilled developers designing with TI products. You are solely responsible for (1) selecting the appropriate TI products for your application, (2) designing, validating and testing your application, and (3) ensuring your application meets applicable standards, and any other safety, security, or other requirements. These resources are subject to change without notice. TI grants you permission to use these resources only for development of an application that uses the TI products described in the resource. Other reproduction and display of these resources is prohibited. No license is granted to any other TI intellectual property right or to any third party intellectual property right. TI disclaims responsibility for, and you will fully indemnify TI and its representatives against, any claims, damages, costs, losses, and liabilities arising out of your use of these resources. TI’s products are provided subject to TI’s Terms of Sale (www.ti.com/legal/termsofsale.html) or other applicable terms available either on ti.com or provided in conjunction with such TI products. TI’s provision of these resources does not expand or otherwise alter TI’s applicable warranties or warranty disclaimers for TI products. Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright © 2020, Texas Instruments Incorporated