Pulse transformers TLA /ALT series Issue date: April 2012 • All specifications are subject to change without notice. • Conformity to RoHS Directive: This means that, in conformity with EU Directive 2002/95/EC, lead, cadmium, mercury, hexavalent chromium, and specific bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications.

PULSE TRANSFORMERS TLA/ALT SERIES Contents Page Pulse Transformers/Pin Terminal Type TLA-3T101LF(-T) 10BASE-2/5/T .....................................................2 TLA-3T106LF(-T) 10BASE-T............................................................4 TLA-3T107LF(-T) 10BASE-T............................................................4 TLA-3T105LF(-T) 10BASE-T............................................................6 TLA-3T109LF(-T) 10BASE-T............................................................6 TLA-3T110LF(-T) 10BASE-T............................................................6 TLA-3T112LF(-T) 10BASE-T............................................................6 TLA-6T103LF(-T) 10/100BASE-TX..................................................8 TLA-6T118LF(-T) 10/100BASE-TX..................................................10 TLA-6T119LF(-T) 10/100BASE-TX..................................................10 TLA-6T120LF(-T) 10/100BASE-TX..................................................10 TLA-6T121LF(-T) 10/100BASE-TX..................................................10 TLA-6T122LF(-T) 10/100BASE-TX..................................................10 TLA-6T127LF(-T) 10/100BASE-TX, PoE..........................................12 TLA-6T133WLF(-T) 10/100BASE-TX...............................................14 TLA-6T214ALF(-T) 10/100/1000BASE-T.........................................16 TLA-6T213LF(-T)　10/100/1000BASE-TX........................................18 TLA-7T201LF(-T)　10/100/1000BASE-TX........................................20 TLA-6T406(-T)　10/100BASE-TX.....................................................22 TLA-7T101LF(-T)　10/100/1000BASE-T..........................................24 Pulse Transformers/Connector Type TLA-6T776F　10/100BASE-TX.........................................................26 TLA-6T785　10/100BASE-TX...........................................................28 LC Modules TLA-3M103LF(-T)　10BASE-T......................................................30 Pulse Transformers/SMD Type ALT4532.........................................................................................32 Precautions The TDK products in this data are intended for usage in general electronics applications (computer, per- sonal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.). They are neither intend nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury (atomic energy control instruments, airplane or spaceship instruments, transportation instrument, traffic signal instruments, combustion control instrument, medical instruments, all types of safety devices, etc.). • Conformity to RoHS Directive: This means that, in conformity with EU Directive 2002/95/EC, lead, cadmium, mercury, hexavalent chromium, and specific bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications.

(2/33) PULSE TRANSFORMERS TLA/ALT Series Pulse Transformers/Pin Terminal Type TLA-3T101LF(-T) ISO8802.3(IEEE802.3) 10BASE2/5/-T FEATURES GENERAL SPECIFICATIONS • Product conforming to RoHS directive. Pulse transformer 3 • Can be mounted with lead-free solder (260°C max.). Port 1 Operating 0 to +70°C • 16-pin SMD package(1.27mm=50mil pin pitch). Temperature ranges Storage –40 to +85°C • Using the high-quality and wide-band ferrite cores for LAN. Withstanding voltage Erms:2000V[60s] • Packaging specification is taping and bulk(TLA-3T101LF-T: Tape and reel, TLA-3T101LF: Bulk). SHAPES AND DIMENSIONS CIRCUIT DIAGRAM 11.6max. 5.9max. (cid:8237) (cid:8236) (cid:8235) (cid:8234) (cid:8233) (cid:8232) (cid:8231) (cid:8230) 1.27typ. (cid:1280) (cid:1273) yp. 5t 0. ±9.20.2 6.8typ. TPLoDatrK tN ∗No∗o.∗. (cid:8222) (cid:8223) (cid:8224) (cid:8225) (cid:8226) (cid:8227) (cid:8228) (cid:8229) (cid:1265) (cid:1272) N.C. pins: (cid:8224)(cid:8227)(cid:8232)(cid:8235) 0.25typ. ∗∗∗ : Country of origin 0.45typ. 0.10max. Dimensions in mm RECOMMENDED PC BOARD PATTERN 8.89 (cid:8237) (cid:8230) Primary signal pattern (connected No.(cid:8222)-(cid:8229)) keep out area 8 4 9. 3. Secondary signal pattern (connected No.(cid:8230)-(cid:8237)) keep out area (cid:8222) (cid:8229) 4 1. 1.27 0.9 Dimensions in mm ELECTRICAL CHARACTERISTICS Inter-winding Inductance Leakage inductance DC resistance Turns ratio stray capacitance ((cid:80)H)typ.[100kHz] ((cid:80)H)max.[100kHz] ((cid:58))max. (cid:8222)(cid:8223):(cid:8237)(cid:8236) (pF)max.[100kHz] Part No. (cid:8222)-(cid:8223) (cid:8222)-(cid:8223)[(cid:8237)-(cid:8236) shorted] (cid:8222)-(cid:8223),(cid:8237)-(cid:8236) (cid:8225)(cid:8226):(cid:8234)(cid:8233) (cid:8222)(cid:8223)-(cid:8237)(cid:8236) (cid:8225)-(cid:8226) (cid:8225)-(cid:8226)[(cid:8234)-(cid:8233) shorted] (cid:8225)-(cid:8226),(cid:8234)-(cid:8233) (cid:8228)(cid:8229):(cid:8231)(cid:8230) (cid:8225)(cid:8226)-(cid:8234)(cid:8233) (cid:8228)-(cid:8229) (cid:8228)-(cid:8229)[(cid:8231)-(cid:8230) shorted] (cid:8228)-(cid:8229),(cid:8231)-(cid:8230) (cid:8228)(cid:8229)-(cid:8231)(cid:8230) TLA-3T101LF(-T) 1:1 100 0.25 10 0.35, 0.35 • Ta=25°C • Conformity to RoHS Directive: This means that, in conformity with EU Directive 2002/95/EC, lead, cadmium, mercury, hexavalent chromium, and specific bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications. • All specifications are subject to change without notice. 006-02 / 20120414 / edlan_tla.fm

(3/33) PACKAGING STYLES Quantity : 1000pieces/reel TAPE DIMENSIONS 5 7 ø1.5+0.1, -0 12 2 4 10 1. 5.9 5 11. 4 ± 0.312.4) 2( 0.4 Dimensions in mm REEL DIMENSIONS p. y 0t 3 3 ø 2±0.5 ø21±0.8 ø13±0.2 30.4max. Dimensions in mm RECOMMENDED SOLDERING CONDITION RECOMMENDED CONDITION FOR LONG TERM STORE REFLOW SOLDERING When it stores for a long term, please avoid place of high tempera- ture and high humidity. Recommend that it uses after the delivery within 1year. 30s max. 260˚C max. Temperature range: +5 to +30°C 230˚C Natural Humidity: 60(%)RH max. cooling 165±15˚C 2˚C/s 120s max. 1 to 2˚C/s Time(s) • Temperature is measured at the terminal portion of product (Using thermocoupler for measurement). • This profile is reference data we recommend. Please check in your actual process. • For reliable soldering, the thickness of solder paste screen should be over the terminal co-planality. • The cutted end of terminal has no plating(out of subject of solder ability). • All specifications are subject to change without notice. 006-02 / 20120414 / edlan_tla.fm

(4/33) TLA-3T106LF(-T)/107LF(-T) ISO8802.3(IEEE802.3) 10BASE-T FEATURES GENERAL SPECIFICATIONS • Product conforming to RoHS directive. Pulse transformer 4 • Can be mounted with lead-free solder (260°C max.). Port 4 Operating 0 to +70°C • 16-pin SMD package(1.27mm=50mil pin pitch). Temperature ranges Storage –40 to +85°C • Using the high-quality and wide-band ferrite cores for LAN. Withstanding voltage Erms: 2000V[60s] • Packaging specification is taping and bulk(TLA-3T10 LF-T: Tape and reel, TLA-3T10 LF: Bulk). SHAPES AND DIMENSIONS CIRCUIT DIAGRAM 11.6max. 5.9max. (cid:8237) (cid:8236) (cid:8235) (cid:8234) (cid:8233) (cid:8232) (cid:8231) (cid:8230) 1.27typ. (cid:8237) (cid:8230) yp. 5t 0. ±9.20.2 6.8typ. TPLoDatrK tN ∗No∗o.∗. (cid:8222) (cid:8223) (cid:8224) (cid:8225) (cid:8226) (cid:8227) (cid:8228) (cid:8229) (cid:8222) (cid:8229) 0.25typ. ∗∗∗ : Country of origin 0.45typ. 0.10max. Dimensions in mm RECOMMENDED PC BOARD PATTERN 8.89 (cid:8237) (cid:8230) Primary signal pattern (connected No.(cid:8222)-(cid:8229)) keep out area 8 4 9. 3. Secondary signal pattern (connected No.(cid:8230)-(cid:8237)) keep out area (cid:8222) (cid:8229) 4 1. 1.27 0.9 Dimensions in mm ELECTRICAL CHARACTERISTICS Inter-winding Inductance Leakage inductance DC resistance Turns ratio stray capacitance ((cid:80)H)min.[100kHz] ((cid:80)H)max.[100kHz] ((cid:58))max. (cid:8222)(cid:8223):(cid:8237)(cid:8236) (pF)max.[100kHz] (cid:8222)-(cid:8223) (cid:8222)-(cid:8223)[(cid:8237)-(cid:8236) shorted] (cid:8222)-(cid:8223), (cid:8237)-(cid:8236) Part No. (cid:8224)(cid:8225):(cid:8235)(cid:8234) (cid:8222)(cid:8223)-(cid:8237)(cid:8236) (cid:8224)-(cid:8225) (cid:8224)-(cid:8225)[(cid:8235)-(cid:8234) shorted] (cid:8224)-(cid:8225), (cid:8235)-(cid:8234) (cid:8226)(cid:8227):(cid:8233)(cid:8232) (cid:8224)(cid:8225)-(cid:8235)(cid:8234) (cid:8226)-(cid:8227) (cid:8226)-(cid:8227)[(cid:8233)-(cid:8232) shorted] (cid:8226)-(cid:8227), (cid:8233)-(cid:8232) (cid:8228)(cid:8229):(cid:8231)(cid:8230) (cid:8226)(cid:8227)-(cid:8233)(cid:8232) (cid:8228)-(cid:8229) (cid:8228)-(cid:8229)[(cid:8231)-(cid:8230) shorted] (cid:8228)-(cid:8229), (cid:8231)-(cid:8230) (cid:8228)(cid:8229)-(cid:8231)(cid:8230) TLA-3T106LF(-T) 1:1 130 0.3 12 0.4, 0.4 TLA-3T107LF(-T) 1:1.41 130 0.3 12 0.4, 0.5 • Ta=25°C • Conformity to RoHS Directive: This means that, in conformity with EU Directive 2002/95/EC, lead, cadmium, mercury, hexavalent chromium, and specific bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications. • All specifications are subject to change without notice. 006-02 / 20120414 / edlan_tla.fm

(5/33) PACKAGING STYLES Quantity : 1000pieces/reel TAPE DIMENSIONS 5 7 ø1.5+0.1, -0 12 2 4 10 1. 5.9 5 11. 4 ± 0.312.4) 2( 0.4 Dimensions in mm REEL DIMENSIONS p. y 0t 3 3 ø 2±0.5 ø21±0.8 ø13±0.2 30.4max. Dimensions in mm RECOMMENDED SOLDERING CONDITION RECOMMENDED CONDITION FOR LONG TERM STORE REFLOW SOLDERING When it stores for a long term, please avoid place of high tempera- ture and high humidity. Recommend that it uses after the delivery within 1year. 30s max. 260˚C max. Temperature range: +5 to +30°C 230˚C Natural cooling Humidity: 60(%)RH max. 165±15˚C 2˚C/s 120s max. 1 to 2˚C/s Time(s) • Temperature is measured at the terminal portion of product (Using thermocoupler for measurement). • This profile is reference data we recommend. Please check in your actual process. • For reliable soldering, the thickness of solder paste screen should be over the terminal co-planality. • The cutted end of terminal has no plating(out of subject of solder ability). • All specifications are subject to change without notice. 006-02 / 20120414 / edlan_tla.fm

(6/33) TLA-3T105LF(-T)/109LF(-T)/110LF(-T)/112LF(-T) ISO8802.3(IEEE802.3) 10BASE-T FEATURES GENERAL SPECIFICATIONS • Product conforming to RoHS directive. Pulse transformer 2 • Can be mounted with lead-free solder (260°C max.). Common-mode choke 2 Port 1 • 16-pin SMD package(1.27mm=50mil pin pitch). Operating 0 to +70°C • Using the high-quality and wide-band ferrite cores for LAN. Temperature ranges Storage –40 to +85°C • Packaging specification is taping and bulk(TLA-3T1 LF-T: Withstanding voltage Erms: 2000V[60s] Tape and reel, TLA-3T1 LF: Bulk). SHAPES AND DIMENSIONS CIRCUIT DIAGRAM 11.6max. 5.9max. (cid:8237) (cid:8236) (cid:8235) (cid:8234) (cid:8233) (cid:8232) (cid:8231) (cid:8230) 1.27typ. (cid:8237) (cid:8230) yp. 5t 0. ±9.20.2 6.8typ. TPLoDatrK tN ∗No∗o.∗. (cid:8222) (cid:8223) (cid:8224) (cid:8225) (cid:8226) (cid:8227) (cid:8228) (cid:8229) (cid:8222) (cid:8229) N.C. pins: (cid:8225)(cid:8226)(cid:8233)(cid:8234) 0.25typ. ∗∗∗ : Country of origin 0.45typ. 0.10max. Dimensions in mm RECOMMENDED PC BOARD PATTERN 8.89 (cid:8237) (cid:8230) Primary signal pattern (connected No.(cid:8222)-(cid:8229)) keep out area 8 4 9. 3. Secondary signal pattern (connected No.(cid:8230)-(cid:8237)) keep out area (cid:8222) (cid:8229) 4 1. 1.27 0.9 Dimensions in mm ELECTRICAL CHARACTERISTICS Inter-winding Inductance Leakage inductance DC resistance Turns ratio stray capacitance ((cid:80)H)min.[100kHz] ((cid:80)H)max.[100kHz] ((cid:58))max. Part No. (cid:8222)(cid:8223)(cid:8224):(cid:8237)(cid:8236)(cid:8235) (pF)max.[100kHz] (cid:8222)-(cid:8224) (cid:8222)-(cid:8224)[(cid:8237)-(cid:8235) shorted] (cid:8222)-(cid:8224) (cid:8227)(cid:8228)(cid:8229):(cid:8232)(cid:8231)(cid:8230) (cid:8222)(cid:8224)-(cid:8237)(cid:8235) (cid:8227)-(cid:8229) (cid:8227)-(cid:8229)[(cid:8232)-(cid:8230) shorted] (cid:8227)-(cid:8229) (cid:8227)(cid:8229)-(cid:8232)(cid:8230) 1CT:1CT 130 0.3 12 0.5 TLA-3T105LF(-T) 1CT:1CT 130 0.3 12 0.5 2CT:1CT 130 0.95 12 0.5 TLA-3T109LF(-T) 1CT:1CT 130 0.35 12 0.5 1CT:1CT 130 0.35 12 0.5 TLA-3T110LF(-T) 1CT:1.41CT 130 0.35 12 0.5 1CT:1CT 130 0.35 12 0.85 TLA-3T112LF(-T) 1CT:2.5CT 130 0.35 12 0.85 • Ta=25°C • Conformity to RoHS Directive: This means that, in conformity with EU Directive 2002/95/EC, lead, cadmium, mercury, hexavalent chromium, and specific bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications. • All specifications are subject to change without notice. 006-02 / 20120414 / edlan_tla.fm

(7/33) PACKAGING STYLES Quantity : 1000pieces/reel TAPE DIMENSIONS 5 7 ø1.5+0.1, -0 12 2 4 10 1. 5.9 5 11. 4 ± 0.312.4) 2( 0.4 Dimensions in mm REEL DIMENSIONS p. y 0t 3 3 ø 2±0.5 ø21±0.8 ø13±0.2 30.4max. Dimensions in mm RECOMMENDED SOLDERING CONDITION RECOMMENDED CONDITION FOR LONG TERM STORE REFLOW SOLDERING When it stores for a long term, please avoid place of high tempera- ture and high humidity. Recommend that it uses after the delivery within 1year. 30s max. 260˚C max. Temperature range: +5 to +30°C 230˚C Natural Humidity: 60(%)RH max. cooling 165±15˚C 2˚C/s 120s max. 1 to 2˚C/s Time(s) • Temperature is measured at the terminal portion of product (Using thermocoupler for measurement). • This profile is reference data we recommend. Please check in your actual process. • For reliable soldering, the thickness of solder paste screen should be over the terminal co-planality. • The cutted end of terminal has no plating(out of subject of solder ability). • All specifications are subject to change without notice. 006-02 / 20120414 / edlan_tla.fm

(8/33) TLA-6T103LF(-T) ISO8802.3(IEEE802.3) 10/100BASE-TX & ATM FEATURES GENERAL SPECIFICATIONS • Product conforming to RoHS directive. Pulse transformer 2 • Can be mounted with lead-free solder (260°C max.). Common-mode choke 2 Inductor 1 • 16-pin SMD package(2.54mm=100mil pin pitch). Port 1 • Excellent common-mode noise suppression. Operating 0 to +70°C Temperature ranges • Inductance is 350μH or greater (f=100kHz, DC bias=8mA). Storage –40 to +85°C • Using the high-quality and wide-band ferrite cores for LAN. Withstanding voltage Erms:1500V[60s] • Packaging specification is taping and bulk(TLA-6T103LF-T: Tape and reel, TLA-6T103LF: Bulk). SHAPES AND DIMENSIONS CIRCUIT DIAGRAM 25.7max. 5.95max. 1CT:1CT (cid:8222) (cid:8228) 2.54typ. (cid:8237) (cid:8230) yp. RX 8t 0. ±12.50.3 9.3typ. TPLoDatrK tN ∗No∗o.∗. (cid:8223)(cid:8224) (cid:8226)(cid:8227) 1CT:1CT (cid:8222) (cid:8229) (cid:8236) (cid:8232) 0.25typ. TX ∗∗∗ : Country of origin (cid:8237) (cid:8231) 0.45typ. 0.10max. Dimensions in mm (cid:8235) (cid:8233) N.C. pins: (cid:8225)(cid:8229)(cid:8230)(cid:8234) RECOMMENDED PC BOARD PATTERN 17.78 (cid:8237) (cid:8230) Primary signal pattern (connected No.(cid:8222)-(cid:8224), (cid:8235)-(cid:8237)) keep out area 13.72 8.64 5.0 S(ceocnonnedcateryd sNigon.(cid:8226)al -p(cid:8228)at,t e(cid:8231)rn-(cid:8233)) keep out area (cid:8222) (cid:8229) 4 2.5 2.54 1.02 Dimensions in mm ELECTRICAL CHARACTERISTICS Inductance Insertion loss Inter-winding Turns ratio ((cid:80)H)min. (dB)max. stray capacitance Part No. (cid:8236)(cid:8235)(cid:8237) : (cid:8232)(cid:8233)(cid:8231) [DC bias 8mA, 100kHz] [0.1 to 100MHz] (pF)max.[100kHz] (cid:8222)(cid:8224)(cid:8223) : (cid:8228)(cid:8226)(cid:8227) (cid:8232)-(cid:8231) (cid:8236)(cid:8237)-(cid:8232)(cid:8231) (cid:8236)(cid:8237)-(cid:8232)(cid:8231) (cid:8228)-(cid:8227) (cid:8228)(cid:8227)-(cid:8222)(cid:8223) (cid:8222)(cid:8223)-(cid:8228)(cid:8227) 1CT:1CT 350 1 25 TLA-6T103LF(-T) 1CT:1CT 350 1 25 • Ta=25°C • Conformity to RoHS Directive: This means that, in conformity with EU Directive 2002/95/EC, lead, cadmium, mercury, hexavalent chromium, and specific bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications. • All specifications are subject to change without notice. 006-02 / 20120414 / edlan_tla.fm

(9/33) PACKAGING STYLES Quantity : 600pieces/reel TAPE DIMENSIONS ø1.5+0.1, -0 16 2 4 13.1 75 6.1 1. 2 0. 2 3 4 0. 9) 0. ± 5. 4 44 (2 7 1. 0.4 Dimensions in mm REEL DIMENSIONS p. y 0t 3 3 ø 2±0.5 ø21±0.8 ø13±0.2 50.4max. Dimensions in mm RECOMMENDED SOLDERING CONDITION RECOMMENDED CONDITION FOR LONG TERM STORE REFLOW SOLDERING When it stores for a long term, please avoid place of high tempera- ture and high humidity. Recommend that it uses after the delivery within 1year. 30s max. 260˚C max. Temperature range: +5 to +30°C 230˚C Natural cooling Humidity: 60(%)RH max. 165±15˚C 2˚C/s 120s max. 1 to 2˚C/s Time(s) • Temperature is measured at the terminal portion of product (Using thermocoupler for measurement). • This profile is reference data we recommend. Please check in your actual process. • For reliable soldering, the thickness of solder paste screen should be over the terminal co-planality. • The cutted end of terminal has no plating(out of subject of solder ability). • All specifications are subject to change without notice. 006-02 / 20120414 / edlan_tla.fm

(10/33) TLA-6T118LF/119LF/120LF/121LF/122LF(-T) ISO8802.3(IEEE802.3) 10/100BASE-TX FEATURES GENERAL SPECIFICATIONS • Product conforming to RoHS directive. Pulse transformer 2 • Can be mounted with lead-free solder (260°C max.). Common-mode choke 2 Port 1 • 16-pin SMD package(1.27mm=50mil pin pitch). Operating 0 to +70°C • Excellent common mode noise suppression. Temperature ranges Storage –40 to +85°C • Inductance is 350μH or greater (f=100kHz, DC bias=8mA). Withstanding voltage Erms:1500V[60s] • Using the high-quality and wide-band ferrite cores for LAN. • Packaging specification is taping and bulk(TLA-6T1 LF-T: Tape and reel, TLA-6T1 LF: Bulk). SHAPES AND DIMENSIONS CIRCUIT DIAGRAM 11.6max. 5.9max. (cid:8237) (cid:8236) (cid:8235) (cid:8234) (cid:8233) (cid:8232) (cid:8231) (cid:8230) 1.27typ. (cid:8237) (cid:8230) yp. 5t 0. ±9.20.2 6.8typ. TPLoDatrK tN ∗No∗o.∗. (cid:8222) (cid:8223) (cid:8224) (cid:8225) (cid:8226) (cid:8227) (cid:8228) (cid:8229) (cid:8222) (cid:8229) 0.25typ. TX RX N.C. pins: (cid:8225)(cid:8226)(cid:8233)(cid:8234) ∗∗∗ : Country of origin 0.45typ. 0.10max. Dimensions in mm RECOMMENDED PC BOARD PATTERN 8.89 (cid:8237) (cid:8230) Primary signal pattern (connected No.(cid:8222)-(cid:8229)) keep out area 8 4 9. 3. Secondary signal pattern (connected No.(cid:8230)-(cid:8237)) keep out area (cid:8222) (cid:8229) 4 1. 1.27 0.9 Dimensions in mm ELECTRICAL CHARACTERISTICS Inductance Insertion loss Inter-winding Turns ratio ((cid:80)H)min. (dB)max. stray capacitance Part No. (cid:8222)(cid:8223)(cid:8224) : (cid:8237)(cid:8236)(cid:8235) [DC bias 8mA, 100kHz] [0.1 to 100MHz] (pF)max.[100kHz] (cid:8227)(cid:8228)(cid:8229) : (cid:8232)(cid:8231)(cid:8230) (cid:8237)-(cid:8235) (cid:8222)(cid:8224)-(cid:8237)(cid:8235) (cid:8222)(cid:8224)-(cid:8237)(cid:8235) (cid:8232)-(cid:8230) (cid:8232)(cid:8230)-(cid:8227)(cid:8229) (cid:8227)(cid:8229)-(cid:8232)(cid:8230) 1CT:1CT 350 1 25 TLA-6T118LF(-T) 1CT:1CT 350 1 25 1.41CT:1CT 350 2 25 TLA-6T119LF(-T) 1CT:1CT 350 1 25 2CT:1CT 350 3.5 25 TLA-6T120LF(-T) 1CT:1CT 350 1 25 1CT:1.41CT 350 2.5 25 TLA-6T121LF(-T) 1CT:1CT 350 1 25 1.25CT:1CT 350 2 25 TLA-6T122LF(-T) 1CT:1CT 350 1 25 • Ta=25°C • Conformity to RoHS Directive: This means that, in conformity with EU Directive 2002/95/EC, lead, cadmium, mercury, hexavalent chromium, and specific bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications. • All specifications are subject to change without notice. 006-02 / 20120414 / edlan_tla.fm

(11/33) PACKAGING STYLES Quantity : 1000pieces/reel TAPE DIMENSIONS 5 7 ø1.5+0.1, -0 12 2 4 10 1. 5.9 5 11. 4 ± 0.312.4) 2( 0.4 Dimensions in mm REEL DIMENSIONS p. y 0t 3 3 ø 2±0.5 ø21±0.8 ø13±0.2 30.4max. Dimensions in mm RECOMMENDED SOLDERING CONDITION RECOMMENDED CONDITION FOR LONG TERM STORE REFLOW SOLDERING When it stores for a long term, please avoid place of high tempera- ture and high humidity. Recommend that it uses after the delivery within 1year. 30s max. 260˚C max. Temperature range: +5 to +30°C 230˚C Natural Humidity: 60(%)RH max. cooling 165±15˚C 2˚C/s 120s max. 1 to 2˚C/s Time(s) • Temperature is measured at the terminal portion of product (Using thermocoupler for measurement). • This profile is reference data we recommend. Please check in your actual process. • For reliable soldering, the thickness of solder paste screen should be over the terminal co-planality. • The cutted end of terminal has no plating(out of subject of solder ability). • All specifications are subject to change without notice. 006-02 / 20120414 / edlan_tla.fm

(12/33) TLA-6T127LF(-T) ISO8802.3(IEEE802.3) 10/100BASE-TX, POWER OVER ETHERNET FEATURES GENERAL SPECIFICATIONS • Product conforming to RoHS directive. Pulse transformer 2 • Can be mounted with lead-free solder (260°C max.). Common-mode choke 2 Port 1 • 16-pin SMD package(1.27mm=50mil pin pitch). Operating 0 to +70°C • Inductance is 350μH or greater (f=100kHz, DC bias=8mA). Temperature ranges Storage –40 to +85°C • Allowable current is 350mA max. Withstanding voltage Erms:1500V[60s] • Excellent common mode noise suppression under the power transmission. • Packaging specification is taping and bulk(TLA-6T127LF-T: Tape and reel, TLA-6T127LF: Bulk). SHAPES AND DIMENSIONS CIRCUIT DIAGRAM 11.6max. 5.9max. (cid:8237) (cid:8236) (cid:8235) (cid:8234) (cid:8233) (cid:8232) (cid:8231) (cid:8230) 1.27typ. (cid:8237) (cid:8230) yp. 5t 0. ±9.20.2 6.8typ. TPLoDatrK tN ∗No∗o.∗. (cid:8222) (cid:8223) (cid:8224) (cid:8225) (cid:8226) (cid:8227) (cid:8228) (cid:8229) (cid:8222) (cid:8229) 0.25typ. TX RX N.C. pins: (cid:8225)(cid:8226) ∗∗∗ : Country of origin 0.45typ. 0.10max. Dimensions in mm RECOMMENDED PC BOARD PATTERN 8.89 (cid:8237) (cid:8230) Primary signal pattern (connected No.(cid:8222)-(cid:8229)) keep out area 8 4 9. 3. Secondary signal pattern (connected No.(cid:8230)-(cid:8237)) keep out area (cid:8222) (cid:8229) 4 1. 1.27 0.9 Dimensions in mm ELECTRICAL CHARACTERISTICS Inductance Insertion loss Inter-winding Turns ratio ((cid:80)H)min. (dB)max. stray capacitance Part No. (cid:8222)(cid:8223)(cid:8224) : (cid:8237)(cid:8236)(cid:8235) [DC bias 8mA, 100kHz] [0.1 to 100MHz] (pF)max.[100kHz] (cid:8227)(cid:8228)(cid:8229) : (cid:8232)(cid:8231)(cid:8230) (cid:8237)-(cid:8235) (cid:8222)(cid:8224)-(cid:8237)(cid:8235) (cid:8222)(cid:8224)-(cid:8237)(cid:8235) (cid:8232)-(cid:8230) (cid:8232)(cid:8230)-(cid:8227)(cid:8229) (cid:8227)(cid:8229)-(cid:8232)(cid:8230) 1CT:1CT 350 1 25 TLA-6T127LF(-T) 1CT:1CT 350 1 25 • Ta=25°C • Conformity to RoHS Directive: This means that, in conformity with EU Directive 2002/95/EC, lead, cadmium, mercury, hexavalent chromium, and specific bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications. • All specifications are subject to change without notice. 006-02 / 20120414 / edlan_tla.fm

(13/33) PACKAGING STYLES Quantity : 1000pieces/reel TAPE DIMENSIONS 5 7 ø1.5+0.1, -0 12 2 4 10 1. 5.9 5 11. 4 ± 0.312.4) 2( 0.4 Dimensions in mm REEL DIMENSIONS p. y 0t 3 3 ø 2±0.5 ø21±0.8 ø13±0.2 30.4max. Dimensions in mm RECOMMENDED SOLDERING CONDITION RECOMMENDED CONDITION FOR LONG TERM STORE REFLOW SOLDERING When it stores for a long term, please avoid place of high tempera- ture and high humidity. Recommend that it uses after the delivery within 1year. 30s max. 260˚C max. Temperature range: +5 to +30°C 230˚C Natural Humidity: 60(%)RH max. cooling 165±15˚C 2˚C/s 120s max. 1 to 2˚C/s Time(s) • Temperature is measured at the terminal portion of product (Using thermocoupler for measurement). • This profile is reference data we recommend. Please check in your actual process. • For reliable soldering, the thickness of solder paste screen should be over the terminal co-planality. • The cutted end of terminal has no plating(out of subject of solder ability). • All specifications are subject to change without notice. 006-02 / 20120414 / edlan_tla.fm

(14/33) TLA-6T133WLF(-T) ISO8802.3(IEEE802.3) 10/100BASE-TX FEATURES GENERAL SPECIFICATIONS • Can be used in the wide range of temperature(–40 to +85°C). Pulse transformer 2 • Product conforming to RoHS directive. Common-mode choke 2 Port 1 • Can be mounted with lead-free solder (260°C max.). Operating –40 to +85°C • 16-pin SMD package(1.27mm=50mil pin pitch). Temperature ranges Storage –40 to +85°C • Excellent common mode noise suppression. Withstanding voltage Erms:1500V[60s] • Inductance is 350μH or greater (f=100kHz, DC bias=8mA). • Using the high-quality and wide-band ferrite cores for LAN. • Packaging specification is taping and bulk(TLA-6T133WLF-T: Tape and reel, TLA-6T133WLF: Bulk). SHAPES AND DIMENSIONS CIRCUIT DIAGRAM 11.6max. 5.9max. (cid:8237) (cid:8236) (cid:8235) (cid:8234) (cid:8233) (cid:8232) (cid:8231) (cid:8230) 1.27typ. (cid:8237) (cid:8230) yp. 5t 0. ±9.20.2 6.8typ. TPLoDatrK tN ∗No∗o.∗. (cid:8222) (cid:8223) (cid:8224) (cid:8225) (cid:8226) (cid:8227) (cid:8228) (cid:8229) (cid:8222) (cid:8229) 0.25typ. TX RX N.C. pins: (cid:8225)(cid:8226)(cid:8233)(cid:8234) ∗∗∗ : Country of origin 0.45typ. 0.10max. Dimensions in mm RECOMMENDED PC BOARD PATTERN 8.89 (cid:8237) (cid:8230) Primary signal pattern (connected No.(cid:8222)-(cid:8229)) keep out area 8 4 9. 3. Secondary signal pattern (connected No.(cid:8230)-(cid:8237)) keep out area (cid:8222) (cid:8229) 4 1. 1.27 0.9 Dimensions in mm ELECTRICAL CHARACTERISTICS Inductance Insertion loss Inter-winding Turns ratio ((cid:80)H)min. (dB)max. stray capacitance Part No. (cid:8222)(cid:8223)(cid:8224) : (cid:8237)(cid:8236)(cid:8235) [DC bias 8mA, 100kHz] [0.1 to 100MHz] (pF)max.[100kHz] (cid:8227)(cid:8228)(cid:8229) : (cid:8232)(cid:8231)(cid:8230) (cid:8237)-(cid:8235) (cid:8222)(cid:8224)-(cid:8237)(cid:8235) (cid:8222)(cid:8224)-(cid:8237)(cid:8235) (cid:8232)-(cid:8230) (cid:8232)(cid:8230)-(cid:8227)(cid:8229) (cid:8227)(cid:8229)-(cid:8232)(cid:8230) 1CT:1CT 350 1 25 TLA-6T133WLF(-T) 1CT:1CT 350 1 25 • Ta=25°C • Conformity to RoHS Directive: This means that, in conformity with EU Directive 2002/95/EC, lead, cadmium, mercury, hexavalent chromium, and specific bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications. • All specifications are subject to change without notice. 006-02 / 20120414 / edlan_tla.fm

(15/33) PACKAGING STYLES Quantity : 1000pieces/reel TAPE DIMENSIONS 5 7 ø1.5+0.1, -0 12 2 4 10 1. 5.9 5 11. 4 ± 0.312.4) 2( 0.4 Dimensions in mm REEL DIMENSIONS p. y 0t 3 3 ø 2±0.5 ø21±0.8 ø13±0.2 30.4max. Dimensions in mm RECOMMENDED SOLDERING CONDITION RECOMMENDED CONDITION FOR LONG TERM STORE REFLOW SOLDERING When it stores for a long term, please avoid place of high tempera- ture and high humidity. Recommend that it uses after the delivery within 1year. 30s max. 260˚C max. Temperature range: +5 to +30°C 230˚C Natural Humidity: 60(%)RH max. cooling 165±15˚C 2˚C/s 120s max. 1 to 2˚C/s Time(s) • Temperature is measured at the terminal portion of product (Using thermocoupler for measurement). • This profile is reference data we recommend. Please check in your actual process. • For reliable soldering, the thickness of solder paste screen should be over the terminal co-planality. • The cutted end of terminal has no plating(out of subject of solder ability). • All specifications are subject to change without notice. 006-02 / 20120414 / edlan_tla.fm

(16/33) TLA-6T214ALF(-T) ISO8802.3(IEEE802.3) 10/100/1000BASE-T FEATURES GENERAL SPECIFICATIONS • Product conforming to RoHS directive. Pulse transformer 2 • Can be mounted with lead-free solder (260°C max.). Common-mode choke 2 Port 1 • 16-pin SMD package(1.27mm=50mil pin pitch). Operating 0 to +70°C • Low profile (H)2.1mm max. for note PC application. Temperature ranges Storage –40 to +85°C • Excellent common mode noise suppression. Withstanding voltage Erms:1500V[60s] • Inductance is 350μH or greater (f=100kHz, DC bias=8mA). • Using the high-quality and wide-band ferrite cores for LAN. • Packaging specification is taping and bulk(TLA-6T214ALF-T: Tape and reel, TLA-6T214ALF: Bulk). SHAPES AND DIMENSIONS CIRCUIT DIAGRAM 12.70max. 2.10max. (cid:8237) (cid:8236) (cid:8235) (cid:8232) (cid:8231) (cid:8230) (cid:8237) (cid:8235) (cid:8232) (cid:8230) yp. 5t 9 0. ±9.470.2 8.37typ. TPLoDatrK tN ∗No∗o.∗. CT:1CT CT:1CT 1 1 (cid:8222) (cid:8224) (cid:8227) (cid:8229) (cid:8222) (cid:8223) (cid:8224) (cid:8227) (cid:8228) (cid:8229) 0.25typ. TX RX ∗∗∗ 0.45typ. 1.27typ. : Country of origin 0.10max. Dimensions in mm RECOMMENDED PC BOARD PATTERN 8.89 7 0 0. 1 8 1. 1.27 0.9 Dimensions in mm ELECTRICAL CHARACTERISTICS Inductance Insertion loss Inter-winding Turns ratio ((cid:80)H)min. (dB)max. stray capacitance Part No. (cid:8222)(cid:8224)(cid:8223):(cid:8237)(cid:8235)(cid:8236) [DC bias 8mA, 100kHz] [0.1 to 125MHz] (pF)max.[100kHz] (cid:8228)(cid:8227)(cid:8229):(cid:8231)(cid:8232)(cid:8230) (cid:8237)-(cid:8236) (cid:8222)(cid:8223)-(cid:8237)(cid:8236) (cid:8222)(cid:8223)-(cid:8237)(cid:8236) (cid:8231)-(cid:8230) (cid:8231)(cid:8230)-(cid:8228)(cid:8229) (cid:8231)(cid:8230)-(cid:8228)(cid:8229) 1CT:1CT 350 1 25 TLA-6T214ALF(-T) 1CT:1CT 350 1 25 • Ta=25°C • Conformity to RoHS Directive: This means that, in conformity with EU Directive 2002/95/EC, lead, cadmium, mercury, hexavalent chromium, and specific bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications. • All specifications are subject to change without notice. 006-02 / 20120414 / edlan_tla.fm

(17/33) PACKAGING STYLES Quantity : 1500pieces/reel TAPE DIMENSIONS 5 ø1.5+0.1, -0 12 2 4 10 1.7 2.2 5 11. 24±0.3(13.4) 0.3 Dimensions in mm REEL DIMENSIONS p. y 0t 3 3 ø 2±0.5 ø21±0.8 ø13±0.2 30.4max. Dimensions in mm RECOMMENDED SOLDERING CONDITION RECOMMENDED STORE CONDITION REFLOW SOLDERING The product is packaged by Anti-humid Al bag, in order to keep a good solder ability condition and resistance to soldering heat for products. 30s max. 260˚C max. • Before aluminum bag opening 230˚C Natural Temperature range: +5 to +40°C cooling Humidity: 90(%)RH max. 165±15˚C Storage period: 1year • After aluminum bag opening Temperature range: +5 to +30°C Humidity: 60(%)RH max. 2˚C/s 120s max. Storage period: 1week 1 to 2˚C/s Time(s) • Temperature is measured at the terminal portion of product (Using thermocoupler for measurement). • This profile is reference data we recommend. Please check in your actual process. • For reliable soldering, the thickness of solder paste screen should be over the terminal co-planality. • The cutted end of terminal has no plating(out of subject of solder ability). • All specifications are subject to change without notice. 006-02 / 20120414 / edlan_tla.fm

(18/33) TLA-6T213LF(-T) ISO8802.3(IEEE802.3) 10/100/1000BASE-T FEATURES GENERAL SPECIFICATIONS • Product conforming to RoHS directive. Pulse transformer 2 • Can be mounted with lead-free solder (260°C max.). Common-mode choke 2 Port 1 • 12-pin SMD package(1.27mm=50mil pin pitch). Operating 0 to +70°C • Because it is low profile design of 2.2mm max., space saving is Temperature ranges Storage –40 to +85°C possible and is suitable for notebook PC. Withstanding voltage Erms:1500V[60s] • Excellent common mode noise suppression. • Inductance is 350μH or greater (f=100kHz, DC bias=8mA). • Using the high-quality and wide-band ferrite cores for LAN. • Packaging specification is taping and bulk(TLA-6T213LF-T: Tape and reel, TLA-6T213LF: Bulk). SHAPES AND DIMENSIONS CIRCUIT DIAGRAM 8.4max. 2.2max. (cid:1276) (cid:1275) (cid:1274) (cid:1273) (cid:1272) (cid:1271) (cid:1276) (cid:1271) p. y 8t 0. ±9.470.25 8.5typ. TPLoDatrK tN ∗No∗o.∗. CT:1CT CT:1CT 1 1 (cid:8222) (cid:8223) (cid:8224) (cid:1268) (cid:1269) (cid:1270) (cid:8222) (cid:8227) 0.2typ. TX RX ∗∗∗ : Country of origin 0.45typ. 1.27typ. 0.10max. Dimensions in mm RECOMMENDED PC BOARD PATTERN 6.35 2 0. 1 5 6 1. 1.27 0.9 Dimensions in mm ELECTRICAL CHARACTERISTICS Inductance Insertion loss Inter-winding Turns ratio ((cid:80)H)min. (dB)max. stray capacitance Part No. (cid:8222)(cid:8224)(cid:8223):(cid:8233)(cid:8231)(cid:8232) [DC bias 8mA, 100kHz] [0.1 to 100MHz] (pF)max.[100kHz] (cid:8226)(cid:8225)(cid:8227):(cid:8229)(cid:8230)(cid:8228) (cid:8233)-(cid:8232) (cid:8222)(cid:8223)-(cid:8233)(cid:8232) (cid:8222)(cid:8223)-(cid:8233)(cid:8232) (cid:8229)-(cid:8228) (cid:8229)(cid:8228)-(cid:8226)(cid:8227) (cid:8229)(cid:8228)-(cid:8226)(cid:8227) TLA-6T213LF(-T) 1CT:1CT 350 1 25 • Ta=25°C • Conformity to RoHS Directive: This means that, in conformity with EU Directive 2002/95/EC, lead, cadmium, mercury, hexavalent chromium, and specific bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications. • All specifications are subject to change without notice. 006-02 / 20120414 / edlan_tla.fm

(19/33) PACKAGING STYLES Quantity : 1500pieces/reel TAPE DIMENSIONS 5 7 ø1.5+0.1, -0 12 2 4 10 1. 2.2 5 7. 3 16±0.()8.8 0.3 Dimensions in mm REEL DIMENSIONS p. y 0t 3 3 ø 2±0.5 ø21±0.8 ø13±0.2 22.4max. Dimensions in mm RECOMMENDED SOLDERING CONDITION RECOMMENDED STORE CONDITION REFLOW SOLDERING The product is packaged by Anti-humid Al bag, in order to keep a good solder ability condition and resistance to soldering heat for products. 30s max. 260˚C max. • Before aluminum bag opening 230˚C Natural Temperature range: +5 to +40°C cooling Humidity: 90(%)RH max. 165±15˚C Storage period: 1year • After aluminum bag opening Temperature range: +5 to +30°C Humidity: 60(%)RH max. 2˚C/s 120s max. Storage period: 1week 1 to 2˚C/s Time(s) • Temperature is measured at the terminal portion of product (Using thermocoupler for measurement). • This profile is reference data we recommend. Please check in your actual process. • For reliable soldering, the thickness of solder paste screen should be over the terminal co-planality. • The cutted end of terminal has no plating(out of subject of solder ability). • All specifications are subject to change without notice. 006-02 / 20120414 / edlan_tla.fm

(20/33) TLA-7T201LF(-T) ISO8802.3(IEEE802.3) 10/100/1000BASE-T FEATURES GENERAL SPECIFICATIONS • Product conforming to RoHS directive. Pulse transformer 4 • Can be mounted with lead-free solder (260°C max.). Common-mode choke 4 Port 1[1000BASE-T] • 24-pin SMD package(1.27mm=50mil pin pitch). Operating 0 to +70°C • Because it is low profile design of 2.2mm max., space saving is Temperature ranges Storage –40 to +85°C possible and is suitable for notebook PC. Withstanding voltage Erms:1500V[60s] • Excellent common mode noise suppression. • Inductance is 350μH or greater (f=100kHz, DC bias=8mA). • Using the high-quality and wide-band ferrite cores for LAN. • Packaging specification is taping and bulk(TLA-7T201LF-T: Tape and reel, TLA-7T201LF: Bulk). SHAPES AND DIMENSIONS CIRCUIT DIAGRAM 16max. 2.2max. (cid:8245) (cid:8244) (cid:8243) (cid:8242) (cid:8241) (cid:8240) (cid:8239) (cid:8238) (cid:8237) (cid:8236) (cid:8235) (cid:8234) (cid:8245) (cid:1277) p. y 8t 0. ±9.470.25 8.5typ. TPLoDatrK tN ∗No∗o.∗. CT:1CT CT:1CT CT:1CT CT:1CT 1 1 1 1 (cid:8222) (cid:8223) (cid:8224) (cid:1268) (cid:1269) (cid:1270) (cid:8228) (cid:8229) (cid:8230) (cid:8231) (cid:8232) (cid:8233) (cid:8222) (cid:1276) 0.2typ. ∗∗∗ : Country of origin 0.45typ. 1.27typ. 0.10max. Dimensions in mm RECOMMENDED PC BOARD PATTERN 13.97 2 0. 1 5 6 1. 1.27 0.9 Dimensions in mm ELECTRICAL CHARACTERISTICS Inductance Insertion loss Inter-winding Turns ratio ((cid:80)H)min. (dB)max. stray capacitance (cid:8222)(cid:8224)(cid:8223):(cid:8245)(cid:8243)(cid:8244) [DC bias 8mA, 100kHz] [0.1 to 100MHz] (pF)max.[100kHz] Part No. (cid:8226)(cid:8225)(cid:8227):(cid:8241)(cid:8242)(cid:8240) (cid:8245)-(cid:8244) (cid:8222)(cid:8223)-(cid:8245)(cid:8244) (cid:8222)(cid:8223)-(cid:8245)(cid:8244) (cid:8228)(cid:8230)(cid:8229):(cid:8239)(cid:8237)(cid:8238) (cid:8241)-(cid:8240) (cid:8226)(cid:8227)-(cid:8241)(cid:8240) (cid:8226)(cid:8227)-(cid:8241)(cid:8240) (cid:8232)(cid:8231)(cid:8233):(cid:8235)(cid:8236)(cid:8234) (cid:8239)-(cid:8238) (cid:8228)(cid:8229)-(cid:8239)(cid:8238) (cid:8228)(cid:8229)-(cid:8239)(cid:8238) (cid:8235)-(cid:8234) (cid:8232)(cid:8233)-(cid:8235)(cid:8234) (cid:8232)(cid:8233)-(cid:8235)(cid:8234) TLA-7T201LF(-T) 1CT:1CT 350 1 25 • Ta=25°C • Conformity to RoHS Directive: This means that, in conformity with EU Directive 2002/95/EC, lead, cadmium, mercury, hexavalent chromium, and specific bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications. • All specifications are subject to change without notice. 006-02 / 20120414 / edlan_tla.fm

(21/33) PACKAGING STYLES Quantity : 1500pieces/reel TAPE DIMENSIONS 5 ø1.5+0.1, -0 12 2 4 10 1.7 2.2 5 11. 24±0.3()16.2 0.3 Dimensions in mm REEL DIMENSIONS p. y 0t 3 3 ø 2±0.5 ø21±0.8 ø13±0.2 30.4max. Dimensions in mm RECOMMENDED SOLDERING CONDITION RECOMMENDED STORE CONDITION REFLOW SOLDERING The product is packaged by Anti-humid Al bag, in order to keep a good solder ability condition and resistance to soldering heat for products. 30s max. 260˚C max. • Before aluminum bag opening 230˚C Natural Temperature range: +5 to +40°C cooling Humidity: 90(%)RH max. 165±15˚C Storage period: 1year • After aluminum bag opening Temperature range: +5 to +30°C Humidity: 60(%)RH max. 2˚C/s 120s max. Storage period: 1week 1 to 2˚C/s Time(s) • Temperature is measured at the terminal portion of product (Using thermocoupler for measurement). • This profile is reference data we recommend. Please check in your actual process. • For reliable soldering, the thickness of solder paste screen should be over the terminal co-planality. • The cutted end of terminal has no plating(out of subject of solder ability). • All specifications are subject to change without notice. 006-02 / 20120414 / edlan_tla.fm

(22/33) TLA-6T406(-T) ISO8802.3(IEEE802.3) 10/100BASE-TX FEATURES GENERAL SPECIFICATIONS • Product conforming to RoHS directive. Pulse transformer 8 • Can be mounted with lead-free solder (250°C max.). Common-mode choke 8 Port 4 • 40-pin SMD package(1.27mm=50mil pin pitch) for Quad port. Operating 0 to +70°C • Excellent common-mode noise suppression. Temperature ranges Storage –40 to +85°C • Inductance is 350μH or greater (f=100kHz, DC bias=8mA). Withstanding voltage Erms:1500V[60s] • Using the high-quality and wide-band ferrite cores for LAN. • Packaging specification is taping and bulk(TLA-6T406-T: Tape and reel, TLA-6T406: Bulk). SHAPES AND DIMENSIONS CIRCUIT DIAGRAM 25.9max. 5.8max. (cid:8261) (cid:8260) (cid:8259) (cid:8258) (cid:8257) (cid:8256) (cid:8255) (cid:8254) (cid:8253) (cid:8252) (cid:8251) (cid:8250) (cid:8249) (cid:8248) (cid:8247) (cid:8246) (cid:8245) (cid:8244) (cid:8243) (cid:8242) (cid:8261) (cid:8242) p. ±15.70.25 12.2typ. TPDLaoKrtt N N∗oo∗..∗ 0.8ty 1CT:1CT 1CT:1CT 1CT:1CT 1CT:1CT 1CT:1CT 1CT:1CT 1CT:1CT 1CT:1CT (cid:8222) (cid:8223) (cid:8224) (cid:8225) (cid:8226) (cid:8227) (cid:8228) (cid:8229) (cid:8230) (cid:8231) (cid:8232) (cid:8233) (cid:8234) (cid:8235) (cid:8236) (cid:8237) (cid:8238) (cid:8239) (cid:8240) (cid:8241) (cid:8222) (cid:8241) 0.25typ. TX RX RX TX TX RX RX TX 1.27typ. 0.45typ. ∗∗∗: Country of origin 0.15max. Dimensions in mm 24.13typ.(1.27×19) RECOMMENDED PC BOARD PATTERN 24.13(1.27×19) 1.27 (cid:8261) (cid:8242) Primary signal pattern (connected No.(cid:8222)-(cid:8241)) keep out area 16.2 13.2 8.7 Secondary signal pattern (connected No.(cid:8242)-(cid:8261)) keep out area (cid:8222) 0.65 (cid:8241) Dimensions in mm ELECTRICAL CHARACTERISTICS Inductance Insertion loss Inter-winding Turns ratio ((cid:80)H)min. (dB)max. stray capacitance Part No. (cid:8222)(cid:8224)(cid:8223):(cid:8261)(cid:8259)(cid:8260)..... [DC bias 8mA, 100kHz] [0.1 to 100MHz] (pF)max.[100kHz] (cid:8225)(cid:8224)(cid:8226):(cid:8258)(cid:8259)(cid:8257)..... (cid:8261)-(cid:8260)...... (cid:8222)(cid:8223)-(cid:8261)(cid:8260)..... (cid:8222)(cid:8223)-(cid:8261)(cid:8260)..... (cid:8258)-(cid:8257)...... (cid:8225)(cid:8226)-(cid:8258)(cid:8257)..... (cid:8225)(cid:8226)-(cid:8258)(cid:8257)..... 1CT:1CT 350 1 40 TLA-6T406(-T) 1CT:1CT 350 1 40 • Ta=25°C • Conformity to RoHS Directive: This means that, in conformity with EU Directive 2002/95/EC, lead, cadmium, mercury, hexavalent chromium, and specific bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications. • All specifications are subject to change without notice. 006-02 / 20120414 / edlan_tla.fm

(23/33) PACKAGING STYLES Quantity : 500pieces/reel TAPE DIMENSIONS ø1.5+0.1, -0 16.1 4 2 75 6 1. 2 0. 2 3 4 0. 3) 0. ± 6. 4 44 (2 7 1. 0.5 ± 0.05 20 Dimensions in mm REEL DIMENSIONS p. y 0t 3 3 ø 2±0.5 ø21±0.8 ø13±0.2 50.4max. Dimensions in mm RECOMMENDED SOLDERING CONDITION RECOMMENDED STORE CONDITION REFLOW SOLDERING The product is packaged by Anti-humid Al bag, in order to keep a good solder ability condition and resistance to soldering heat for products. 30s max. 250˚C max. • Before aluminum bag opening 230˚C Natural Temperature range: +5 to +40°C cooling Humidity: 90(%)RH max. 165±15˚C Storage period: 1year • After aluminum bag opening Temperature range: +5 to +30°C Humidity: 60(%)RH max. 2˚C/s 120s max. Storage period: 1week 1 to 2˚C/s Time(s) • Temperature is measured at the terminal portion of product (Using thermocoupler for measurement). • This profile is reference data we recommend. Please check in your actual process. • For reliable soldering, the thickness of solder paste screen should be over the terminal co-planality. • The cutted end of terminal has no plating(out of subject of solder ability). • All specifications are subject to change without notice. 006-02 / 20120414 / edlan_tla.fm

(24/33) TLA-7T101LF(-T) ISO8802.3(IEEE802.3) 10/100/1000BASE-T FEATURES GENERAL SPECIFICATIONS • Product conforming to RoHS directive. Pulse transformer 4 • Can be mounted with lead-free solder (260°C max.). Common-mode choke 4 Port 1(1000BASE-T) • 24-pin SMD package(1.27mm=50mil pin pitch). Operating –40 to +85°C • Excellent common-mode noise suppression. Temperature ranges Storage –40 to +85°C • Inductance is 350μH or greater (f=100kHz, DC bias=8mA). Withstanding voltage Erms:1500V[60s] • Using the high-quality and wide-band ferrite cores for LAN. • Packaging specification is taping and bulk(TLA-7T101LF-T: Tape and reel, TLA-7T101LF: Bulk). SHAPES AND DIMENSIONS CIRCUIT DIAGRAM 15.82max. 5.9max. 1.27typ. (cid:8245) (cid:8234) p. y 5t 0. ±9.140.2 6.74typ. TPLoDatrK tN ∗No∗o.∗. (cid:1265) (cid:8233) 0.25typ. ∗∗∗ : Country of origin 0.45typ. 0.10max. Dimensions in mm RECOMMENDED PC BOARD PATTERN 13.97 Primary signal pattern (connected No. - ) keep out area 4 4 7 3 9. 3. Secondary signal pattern (connected No. - ) keep out area 4 1. 1.27 0.9 Dimensions in mm ELECTRICAL CHARACTERISTICS Inductance Insertion loss Inter-winding Turns ratio ((cid:80)H)min. (dB)max. stray capacitance (cid:8223)(cid:8222)(cid:8224) : (cid:8244)(cid:8245)(cid:8243) [DC bias 8mA, 100kHz] [0.1 to 100MHz] (pF)max.[100kHz] Part No. (cid:8226)(cid:8225)(cid:8227) : (cid:8241)(cid:8242)(cid:8240) (cid:8244)-(cid:8243) (cid:8223)(cid:8224)-(cid:8244)(cid:8243) (cid:8223)(cid:8224)-(cid:8244)(cid:8243) (cid:8229)(cid:8228)(cid:8230) : (cid:8238)(cid:8239)(cid:8237) (cid:8241)-(cid:8240) (cid:8226)(cid:8227)-(cid:8241)(cid:8240) (cid:8226)(cid:8227)-(cid:8241)(cid:8240) (cid:8232)(cid:8231)(cid:8233) : (cid:8235)(cid:8236)(cid:8234) (cid:8238)-(cid:8237) (cid:8229)(cid:8230)-(cid:8238)(cid:8237) (cid:8229)(cid:8230)-(cid:8238)(cid:8237) (cid:8235)-(cid:8234) (cid:8232)(cid:8233)-(cid:8235)(cid:8234) (cid:8232)(cid:8233)-(cid:8235)(cid:8234) TLA-7T101LF(-T) 1CT:1CT 350 1 25 • Ta=25°C • Conformity to RoHS Directive: This means that, in conformity with EU Directive 2002/95/EC, lead, cadmium, mercury, hexavalent chromium, and specific bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications. • All specifications are subject to change without notice. 006-02 / 20120414 / edlan_tla.fm

(25/33) PACKAGING STYLES Quantity : 1000pieces/reel TAPE DIMENSIONS 5 7 ø1.5+0.1, -0 12 2 4 9.8 1. 5.9 5 11. 4 ± 0.315.9) 2( 0.4 Dimensions in mm REEL DIMENSIONS p. y 0t 3 3 ø 2±0.5 ø21±0.8 ø13±0.2 30.4max. Dimensions in mm RECOMMENDED SOLDERING CONDITION RECOMMENDED CONDITION FOR LONG TERM STORE REFLOW SOLDERING When it stores for a long term, please avoid place of high tempera- ture and high humidity. Recommend that it uses after the delivery within 1year. 30s max. 260˚C max. Temperature range: +5 to +30°C 230˚C Natural Humidity: 60(%)RH max. cooling 165±15˚C 2˚C/s 120s max. 1 to 2˚C/s Time(s) • Temperature is measured at the terminal portion of product (Using thermocoupler for measurement). • This profile is reference data we recommend. Please check in your actual process. • For reliable soldering, the thickness of solder paste screen should be over the terminal co-planality. • The cutted end of terminal has no plating(out of subject of solder ability). • All specifications are subject to change without notice. 006-02 / 20120414 / edlan_tla.fm

(26/33) Pulse Transformers/Connector Type TLA-6T776F ISO8802.3(IEEE802.3) 10/100BASE-TX FEATURES GENERAL SPECIFICATIONS • Product conforming to RoHS directive. Pulse transformer 2 • Pulse transformer, common mode choke, resistor and high with- Common-mode choke 2 Port 1 standing voltage capacitor are integrated into RJ-45 modular Operating –40 to +85°C jack. Temperature ranges Storage –40 to +85°C • Excellent common mode noise suppression. • Inductance is 200μH or greater (f=100kHz, DC bias=8mA). • The product features high quality, containing a self-winding surface-mount pulse transformer and common mode choke. SHAPES AND DIMENSIONS CIRCUIT DIAGRAM 2.5typ. 16±0.5 21.45±0.5 TX (cid:8222) (cid:8375) (cid:8223) (cid:8376) ±0.5 (cid:8224) RX (cid:8377) 85 (cid:8382) (cid:8375) (cid:8225) (cid:8378) 3. PCB CABLE 1 (cid:8226) (cid:8379) 3.2typ. 3.2typ. (cid:8227)(cid:8228) Ω5 Ω5 75Ω (cid:8380)(cid:8381) 7 7 Dimensions in mm (cid:8229) (cid:8382) 0.001μF 75Ω N.C. pin: (cid:8228) RECOMMENDED PC BOARD PATTERN 8.89typ. 1.27typ. 8-ø0.9 p. y 4t 5 2. (cid:8223)(cid:8225) (cid:8227) (cid:8229) 2-ø1.6 (cid:8222)(cid:8224)(cid:8226) (cid:8228) 9typ. 8.8 yp. p. 5t y 4 3.05t 2typ. 21. 2-ø3.25 9 0. 1 11.43typ. 15.75typ. 16.0typ. Dimensions in mm ELECTRICAL CHARACTERISTICS Inductance Insertion loss Turns ratio ((cid:80)H)min. (dB)max. Part No. (cid:8222)(cid:8224)(cid:8223):(cid:8375)(cid:8376) [DC bias 8mA, 100kHz] [0.1 to 100MHz] (cid:8225)(cid:8227)(cid:8226):(cid:8377)(cid:8380) (cid:8375)-(cid:8376) (cid:8222)(cid:8223)-(cid:8375)(cid:8376) (cid:8377)-(cid:8380) (cid:8377)(cid:8380)-(cid:8225)(cid:8226) 1CT:1 200 1.5 TLA-6T776F 1CT:1 200 1.5 • Ta=25°C • Conformity to RoHS Directive: This means that, in conformity with EU Directive 2002/95/EC, lead, cadmium, mercury, hexavalent chromium, and specific bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications. • All specifications are subject to change without notice. 006-02 / 20120414 / edlan_tla.fm

(27/33) PACKAGING STYLES Tray : 360pieces/box RECOMMENDED SOLDERING CONDITION FLOW SOLDERING 5±1s 255˚C max. Natural cooling 130˚C 90˚C Preheating: 30 to 45s Time(s) Preheating: 90 to 130°C for 30 to 45 seconds. Soldering: 255°C max. 5±1 seconds • Perform flow soldering from the underside of the board. • The surface of plastic protrusions inserted into the board may melt, but this causes no problems with regard to electrical properties or mounting. • The cutted end of terminal has no plating(out of subject of solder ability). RECOMMENDED CONDITION FOR LONG TERM STORE When it stores for a long term, please avoid place of high tempera- ture and high humidity. Recommend that it uses after the delivery within 1year. Temperature range: +5 to +40°C Humidity: 10 to 75%RH max. • All specifications are subject to change without notice. 006-02 / 20120414 / edlan_tla.fm

(28/33) TLA-6T785 ISO8802.3(IEEE802.3) 10/100BASE-TX FEATURES GENERAL SPECIFICATIONS • Product conforming to RoHS directive. Pulse transformer 2 • Pulse transformer, common mode choke, resistor and high with- Common-mode choke 2 Port 1 standing voltage capacitor are integrated into RJ-45 modular Operating –40 to +85°C jack. Temperature ranges Storage –40 to +85°C • Excellent common mode noise suppression. • Inductance is 200μH or greater (f=100kHz, DC bias=8mA). • The product features high quality, containing a self-winding surface-mount pulse transformer and common mode choke. SHAPES AND DIMENSIONS CIRCUIT DIAGRAM 18.5±0.5 TX (cid:8222) (cid:8375) 16±0.5 12±0.5 (cid:8223) (cid:8376) (cid:8224) (cid:8377) RX (cid:8225) (cid:8378) 5 PCB CABLE ±0. (cid:8226) (cid:8379) 2 18. (cid:8382) (cid:8375) (cid:8227) 75Ω (cid:8380) Ω Ω (cid:8228) 5 5 (cid:8381) 7 7 (cid:8229) (cid:8382) 0.001μF 75Ω Dimensions in mm N.C. pin: (cid:8228) RECOMMENDED PC BOARD PATTERN 16.0typ. 11.43typ. 2-ø3.2 4.55typ. 3.05typ. p. 9ty (cid:8228) (cid:8226) (cid:8224) (cid:8222) 2-ø2.1 8 8. (cid:8229) (cid:8227) (cid:8225) (cid:8223) p. y 8-ø0.9 1.27typ. 54t 2. 8.89typ. Dimensions in mm ELECTRICAL CHARACTERISTICS Inductance Insertion loss Turns ratio ((cid:80)H)min. (dB)max. Part No. (cid:8222)(cid:8224)(cid:8223):(cid:8375)(cid:8376) [DC bias 8mA, 100kHz] [0.1 to 100MHz] (cid:8225)(cid:8227)(cid:8226):(cid:8377)(cid:8380) (cid:8375)-(cid:8376) (cid:8222)(cid:8223)-(cid:8375)(cid:8376) (cid:8377)-(cid:8380) (cid:8377)(cid:8380)-(cid:8225)(cid:8226) 1CT:1 200 1.5 TLA-6T785 1CT:1 200 1.5 • Ta=25°C • Conformity to RoHS Directive: This means that, in conformity with EU Directive 2002/95/EC, lead, cadmium, mercury, hexavalent chromium, and specific bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications. • All specifications are subject to change without notice. 006-02 / 20120414 / edlan_tla.fm

(29/33) PACKAGING STYLES Tray : 500pieces/box RECOMMENDED SOLDERING CONDITION FLOW SOLDERING 5±1s 255˚C max. Natural cooling 130˚C 90˚C Preheating: 30 to 45s Time(s) Preheating: 90 to 130°C for 30 to 45 seconds. Soldering: 255°C max. 5±1 seconds • Perform flow soldering from the underside of the board. • The surface of plastic protrusions inserted into the board may melt, but this causes no problems with regard to electrical properties or mounting. • The cutted end of terminal has no plating(out of subject of solder ability). RECOMMENDED CONDITION FOR LONG TERM STORE When it stores for a long term, please avoid place of high tempera- ture and high humidity. Recommend that it uses after the delivery within 1year. Temperature range: +5 to +40°C Humidity: 10 to 75%RH max. • All specifications are subject to change without notice. 006-02 / 20120414 / edlan_tla.fm

(30/33) LC Modules TLA-3M103LF(-T) ISO8802.3(IEEE802.3) 10BASE-T FEATURES GENERAL SPECIFICATIONS • Product conforming to RoHS directive. Low pass filter 2 • Can be mounted with lead-free solder (260°C max.). Pulse transformer 2 Common-mode choke 2 • 16-pin SMD package (2.54mm=100mil pin pitch). Port 1 • Pulse transformer, common-mode choke and low pass filter are Operating 0 to +70°C Temperature ranges integrated into 16-pin SMD package. Storage –40 to +85°C • Using the high-quality and wide-band ferrite cores for LAN. Withstanding voltage Erms:1500V[60s] • Packaging specification is taping and bulk(TLA-3M103LF-T: Tape and reel, TLA-3M103LF: Bulk). SHAPES AND DIMENSIONS CIRCUIT DIAGRAM 25.7max. 5.95max. 1CT:1CT (cid:8222) L.P. FILTER (cid:8229) 2.54typ. (cid:8237) (cid:8230) yp. TX 8t 0. ±12.50.3 9.5typ. TPLoDatrK tN ∗No∗o.∗. (cid:8224)(cid:8226) L.P. FILTER (cid:8227)(cid:8228) 1CT:1CT (cid:8222) (cid:8229) (cid:8237) L.P. FILTER (cid:8230) 0.25typ. RX ∗∗∗ : Country of origin (cid:8235) L.P. FILTER (cid:8232) 0.45typ. 0.10max. Dimensions in mm (cid:8233) (cid:8231) N.C. pins: (cid:8223)(cid:8225)(cid:8234)(cid:8236) RECOMMENDED PC BOARD PATTERN 17.78 2 2.54 13.7 2.54 1.02 Dimensions in mm ELECTRICAL CHARACTERISTICS Insertion loss Attenuation Impedance C.M.R.R. (dB)max.[5 to 10MHz] (dB)min.[30 to 100MHz] ((cid:58))typ.[5 to 10MHz] (dB)min.[1 to 100MHz] Part No. (cid:8222)(cid:8224)-(cid:8229)(cid:8227) (cid:8222)(cid:8224)-(cid:8229)(cid:8227) (cid:8222)-(cid:8224), (cid:8229)-(cid:8227) (cid:8222)(cid:8224)-(cid:8229)(cid:8227) (cid:8230)(cid:8232)-(cid:8237)(cid:8235) (cid:8230)(cid:8232)-(cid:8237)(cid:8235) (cid:8237)-(cid:8235), (cid:8230)-(cid:8232) (cid:8237)(cid:8235)-(cid:8230)(cid:8232) 1 25 100, 100 25 TLA-3M103LF(-T) 1 25 100, 100 25 • Ta=25°C • Conformity to RoHS Directive: This means that, in conformity with EU Directive 2002/95/EC, lead, cadmium, mercury, hexavalent chromium, and specific bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications. • All specifications are subject to change without notice. 006-02 / 20120414 / edlan_tla.fm

(31/33) PACKAGING STYLES Quantity : 600pieces/reel TAPE DIMENSIONS ø1.5+0.1, -0 16 2 4 13.1 75 6.1 1. 2 0. 2 3 4 0. 9) 0. ± 5. 4 44 (2 7 1. 0.4 Dimensions in mm REEL DIMENSIONS p. y 0t 3 3 ø 2±0.5 ø21±0.8 ø13±0.2 50.4max. Dimensions in mm RECOMMENDED SOLDERING CONDITION RECOMMENDED CONDITION FOR LONG TERM STORE REFLOW SOLDERING When it stores for a long term, please avoid place of high tempera- ture and high humidity. Recommend that it uses after the delivery within 1year. 30s max. 260˚C max. Temperature range: +5 to +30°C 230˚C Natural Humidity: 60(%)RH max. cooling 165±15˚C 2˚C/s 120s max. 1 to 2˚C/s Time(s) • Temperature is measured at the terminal portion of product (Using thermocoupler for measurement). • This profile is reference data we recommend. Please check in your actual process. • For reliable soldering, the thickness of solder paste screen should be over the terminal co-planality. • The cutted end of terminal has no plating(out of subject of solder ability). • All specifications are subject to change without notice. 006-02 / 20120414 / edlan_tla.fm

(32/33) Pulse Transformers/SMD Type ALT4532 FEATURES SHAPES AND DIMENSIONS • The ALT4532 Series is a wound chip type pulse transformer L developed for LANs. • Compatible with 10BASE-T, 100BASE-TX, and 1000BASE-T. 3 4 • High-quality product with automatic winding. • Product conforming to RoHS directive. W 2 5 APPLICATIONS 1 6 LAN interface portion of various devices such as network devices, communication devices, and digital home appliances PRODUCT IDENTIFICATION T ALT 4532 - 201 - T 001 (1) (2) (3) (4) (5) Dimensions in mm (1) Series name Type L W T (2) Dimensions L(cid:117)W ALT4532-171-T001 4.5±0.2 3.2±0.2 2.2max. (3) Inductance[at 100kHz/DC bias=8mA] ALT4532-201-T001 4.5±0.2 3.2±0.2 2.9max. 201 : 200μH min. (4) Packaging style RECOMMENDED PC BORARD PATTERN T: ø330mm reel taping 1.45 1.45 5 (5) TDK internal code 0.4 SPECIFICATIONS 35 1. Operating –40 to +85°C 5 Temperature range Storage(After mount) –40 to +85°C 675 0.4 0. PACKAGING STYLE AND QUANTITIES Packaging style Reel Quantity 0.7 1.1 0.5 Dimensions in mm Taping ø180mm 2000 pieces/reel MEASURING CIRCUIT 3 4 5 2 1 6 ELECTRICAL CHARACTERISTICS Inductance Insertion loss Inter-winding (μH)min. Turns ratio (dB)max. stray capacitance Part No. [DC bias 8mA, 100kHz] (cid:8222)(cid:8227)(cid:8223) : (cid:8226)(cid:8224)(cid:8225) [0.1 to 100MHz] (pF)max. (cid:8222)-(cid:8223) (cid:8222)(cid:8223)-(cid:8226)(cid:8225) [100kHz] (cid:8226)-(cid:8225) ALT4532-171-T001 1CT : 1CT 170 2.5 35 ALT4532-201-T001 1CT : 1CT 200 1.5 35 • Conformity to RoHS Directive: This means that, in conformity with EU Directive 2002/95/EC, lead, cadmium, mercury, hexavalent chromium, and specific bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications. • All specifications are subject to change without notice. 006-02 / 20120414 / edlan_tla.fm

(33/33) TYPICAL ELECTRICAL CHARACTERISTICS INSERTION LOSS vs. FREQUENCY CHARACTERISTICS ALT4532-171-T001 ALT4532-201-T001 0 0 )B–1.0 )B–1.0 d d (s (s s s o o n l n l o–2.0 o–2.0 erti erti s s n n I I –3.0 –3.0 –4.0 –4.0 0.1 1 10 100 0.1 1 10 100 Frequency(MHz) Frequency(MHz) TYPICAL APPLICATIONS (100BASE-TX) LAN LAN IC Connector Pulse transformers Common mode filters ALT4532-171-T001 ACM2012-201-2P ALT4532-201-T001 ACM2012-361-2P ACM2012-681-2P ACM2012-102-2P Note) Peripheral circuits differ depending on the IC used; check the circuits with the application note of the IC, etc. • All specifications are subject to change without notice. 006-02 / 20120414 / edlan_tla.fm