Part No. Explanation Diodes Datasheet When ordering, specify the part number. Check each code against the tables shown below. Fill in from the left, leaving any extra boxes empty on the right. Small signal / rectifier diode Example: 1 S S 3 5 5 T E --- 1 7 Part No. Taping Code Zener diode Example: U D Z S T E --- 1 7 5 . 1 B Part No. Taping Code Zener voltage Sub division Packaging type Basic ordering Package Code Package style Direction unit (pcs) T2R Embossed tape Cathode on sprocket hole side 8,000 G MD2 Cathode on sprocket hole side T2N Embossed tape 8,000 Non-direction VML2 T2R Embossed tape Cathode on sprocket hole side 8,000 VMN2 T2RA Embossed tape Cathode on sprocket hole side 8,000 VMD2 T2R Embossed tape Cathode on sprocket hole side 8,000 KMD2 T2R Embossed tape Cathode on sprocket hole side 8,000 VMD3 T2L Embossed tape One terminal on sprocket hole side 8,000 TE61 Embossed tape Cathode on sprocket hole side 3,000 T2R Embossed tape Cathode on sprocket hole side 8,000 EMD2 Cathode on sprocket hole side T2N Embossed tape 8,000 Non-direction EMD3 TL Embossed tape One terminal on sprocket hole side 3,000 EMD3F TL Embossed tape One terminal on sprocket hole side 3,000 EMD4 EMD5 T2R Embossed tape Cathode on sprocket hole side 8,000 EMD6 TE-17 UMD2 Embossed tape Cathode on sprocket hole side 3,000 TW11*1 UMD3 T106 Embossed tape One terminal on sprocket hole side 3,000 UMD3F TL Embossed tape One terminal on sprocket hole side 3,000 UMD4 TL Embossed tape Cathode on sprocket hole side (DA227) 3,000 UMD5 TR Embossed tape Three terminals on sprocket hole side 3,000 UMD6 TR Embossed tape Cathode on sprocket hole side 3,000 TN Non-direction UMD6 Embossed tape 3,000 (cid:1678)TR*2 Cathode on sprocket hole side SSD3 T116 Embossed tape One terminal on sprocket hole side 3,000 SMD3 T146 Embossed tape One terminal on sprocket hole side 3,000 SMD5 T148 Embossed tape Three terminals on sprocket hole side 3,000 T108*3 Anode on sprocket hole side SMD6 Embossed tape 3,000 T110 Non-direction MPD6 TR Embossed tape Terminal No.1 on sprocket hole side 1,000 TSMD5 TR Embossed tape Terminal No.1 on sprocket hole side 3,000 TSMD6 TR Embossed tape Terminal No.1 on sprocket hole side 3,000 TSMD8 TR Embossed tape Terminal No.1 on sprocket hole side 3,000 TUMD2 TR Embossed tape Cathode on sprocket hole side 3,000 TUMD2S TR Embossed tape Cathode on sprocket hole side 3,000 TUMD5 TR Embossed tape Terminal No.1 on sprocket hole side 3,000 PMDU TR Embossed tape Cathode on sprocket hole side 3,000 PMDS TE25 Embossed tape Cathode on sprocket hole side 1,500 CPD TL Embossed tape Fin on sprocket hole side 2,500 LPDS TL Embossed tape Fin on sprocket hole side 1,000 TO-220FN(3pin) (cid:1443) Bulk box 500 TO-220FN(2pin) (cid:1443) Stick box 1,000 TO-220NFM (cid:1443) Stick box 1,000 HMD8 TE61 Embossed tape Cathode on sprocket hole side 3,000 HMD12 TE61 Embossed tape Cathode on sprocket hole side 3,000 TSMD8 TR Embossed tape Terminal No.1 on sprocket hole side 3,000 Notes: *1 Regarding the UMD2 package, only 1SS356 is available in TW11. *2 Regarding the UMD6 package, only RB731XN is offered in TR. *3 Regarding the SMD6 package, only IMN10 and RB731U are available in T108. (cid:1939) Available outside Japan www.rohm.com 1/1 ○c 2013 ROHM Co., Ltd. All rights reserved. 2013.04 - Rev.D

Notice Notes 1) The information contained herein is subject to change without notice. 2) Before you use our Products, please contact our sales representativeand verify the latest specifica- tions : 3) Although ROHM is continuously working to improve product reliability and quality, semicon- ductors can break down and malfunction due to various factors. Therefore, in order to prevent personal injury or fire arising from failure, please take safety measures such as complying with the derating characteristics, implementing redundant and fire prevention designs, and utilizing backups and fail-safe procedures. ROHM shall have no responsibility for any damages arising out of the use of our Poducts beyond the rating specified by ROHM. 4) Examples of application circuits, circuit constants and any other information contained herein are provided only to illustrate the standard usage and operations of the Products. The peripheral conditions must be taken into account when designing circuits for mass production. 5) The technical information specified herein is intended only to show the typical functions of and examples of application circuits for the Products. ROHM does not grant you, explicitly or implicitly, any license to use or exercise intellectual property or other rights held by ROHM or any other parties. ROHM shall have no responsibility whatsoever for any dispute arising out of the use of such technical information. 6) The Products are intended for use in general electronic equipment (i.e. AV/OA devices, communi- cation, consumer systems, gaming/entertainment sets) as well as the applications indicated in this document. 7) The Products specified in this document are not designed to be radiation tolerant. 8) For use of our Products in applications requiring a high degree of reliability (as exemplified below), please contact and consult with a ROHM representative : transportation equipment (i.e. cars, ships, trains), primary communication equipment, traffic lights, fire/crime prevention, safety equipment, medical systems, servers, solar cells, and power transmission systems. 9) Do not use our Products in applications requiring extremely high reliability, such as aerospace equipment, nuclear power control systems, and submarine repeaters. 10) ROHM shall have no responsibility for any damages or injury arising from non-compliance with the recommended usage conditions and specifications contained herein. 11) ROHM has used reasonable care to ensur the accuracy of the information contained in this document. However, ROHM does not warrants that such information is error-free, and ROHM shall have no responsibility for any damages arising from any inaccuracy or misprint of such information. 12) Please use the Products in accordance with any applicable environmental laws and regulations, such as the RoHS Directive. For more details, including RoHS compatibility, please contact a ROHM sales office. ROHM shall have no responsibility for any damages or losses resulting non-compliance with any applicable laws or regulations. 13) When providing our Products and technologies contained in this document to other countries, you must abide by the procedures and provisions stipulated in all applicable export laws and regulations, including without limitation the US Export Administration Regulations and the Foreign Exchange and Foreign Trade Act. 14) This document, in part or in whole, may not be reprinted or reproduced without prior consent of ROHM. Thank you for your accessing to ROHM product informations. More detail product informations and catalogs are available, please contact us. ROHM Customer Support System http://www.rohm.com/contact/ www.rohm.com R1102A © 2013 ROHM Co., Ltd. All rights reserved.