REVISION BA TCSD-XX-X-XX.XX-01-X-XXX-XXX NOTES: No OF POSITIONS 1. HIDDEN LINES ARE USED TO SHOW POLARIZATION OPTIONS #2 WHEN USING -N OPTION. 03, 04, 05, 07, 08, 10, 12, SEE OPTIONS BELOW 13, 15, 17, 20, 22, 25 23.. A C S O RFE PRREEVS 'ECN' TOS NA TCCRBIT-5IC0 ACLA DBILMEE ANSSSIOEMNB.LIES WILL BE LEAD FREE. NOTE: OTHER POSITIONS OPTIONS #1 4. ALL ASSEMBLIES TO BE 100% ELECTRICALLY TESTED FOR SHORTS AND OPENS. AVAILABLE AS ASO. TOOL SEE OPTIONS BELOW DO NOT IS CAPABLE OF POSITIONS 2-25 SCALE FROM 5. ALL ASSEMBLIES TO BE 100% HI-POT TESTED AT 800V. PLATING OPTION 6. STRAIN RELIEF TO WITHSTAND 5LB STRAIGHT PULL. THIS PRINT -F: FLASH SELECTIVE GOLD, MATTE TIN TAIL 7. WHEN CUTTING CABLE TO LENGTH, CONDUCTORS MAY NOT EXTEND PAST THE CABLE INSULATION. -L: LIGHT SELECTIVE GOLD, MATTE TIN TAIL 8. REFERENCE TCSD-XX-XX-X-X-XXX PRINT FOR CONNECTOR ASSEMBLY AND ITS REQUIREMENTS. END ASSEMBLY (LEAVE BLANK FOR STANDARD -S: 9. WHEN CUTTING CABLE TO LENGTH, CONDUCTORS SHOULD NOT EXTEND PAST THE -S: SINGLE SELECTIVE PLATING) CABLE INSULATION, EXTENDING LESS THAN 25% OF CABLE THICKNESS ON CONSECUTIVE -D: DOUBLE AND LESS THAN 50% OF THE CABLE THICKNESS ON NON-CONSECUTIVE STRANDS IS CONSIDERED A PROCESS INDICATOR. 10. FOR LENGTHS LESS THAN 12.5" TOLERANCE SHALL BE +/-.125, ASSEMBLY LENGTH LEAD STYLE ALL OTHER LENGTHS SHALL BE +/-1%. (INCLUDES ADDED OPTION LENGTHS) ALL OPTIONS THAT USE -D"XX": 4.00 [101.6] MINIMUM ALL OTHER OPTION: 1.00 [25.4] MINIMUM C XX.XX[XX INCHES x 25.4] ±1% (SEE NOTE 7 & 10) .158 4.00 REF C XX.XX[XX INCHES x 25.4] ±1% (SEE NOTE 7 & 10) .125 3.18 REF (No OF POS x .07874[2.0000]) + .15748[4.0000] REF COLORED WIRE TO SIDE C 2 .010 0.25 MAX * COOF LFOIRRSTE DPO WSI RINED MICAAYT BOER .200±.010 5.08±0.254 CABLE OVERHANG (TYP) BLACK, BLUE, OR RED. (SEE NOTE 7) -N OPTION .040 1.02 REF -N OPTION FIRST POSITION INDICATOR -RN1 OPTION -N OPTION -RN2 OPTION 1 -RN OPTION -D: (DOUBLE END) -S (SINGLE END) (SAME AS -D UNLESS OTHERWISE STATED) C:\EnterpriseVault\DWG\MISC\MKTG\TCSD-XX-X-XX.XX-01-X-XXX-XXX-MKT.SLDDRW 02 UNLESS OTHERWISE SPECIFIED, * PROPRIETARY NOTE * COLORED WIRE TO OPPOSITE DIMENSIONS ARE IN INCHES. THIS DOCUMENT CONTAINS CONFIDENTIAL AND PROPRIETARY INFORMATION AND ALL DESIGN, SIDE OF FIRST POS INDICATOR TOLERANCES ARE: MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS DECIMALS ANGLES AINNCD. TSHAILSE DS ORCIGUHMTSE NATR ES HEAXLPLR NESOSTL YB ER EDSIESRCVLOEDSE BDY, ISNA MWTHEOCL, E .XX: .01 [.3] 2 OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR 520 PARK EAST BLVD, NEW ALBANY, IN 47150 01 .XXX: .005 [.13] REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY PHONE: 812-944-6733 FAX: 812-948-5047 .XXXX: .0020 [.051] OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS e-Mail info@SAMTEC.com code 55322 WRITTEN CONSENT OF SAMTEC, INC. .040 1.02 .125 3.18 MATERIAL: DO NOT SCALE DRAWING SHEET SCALE: 2:1 DESCRIPTION: REF REF INSULATOR: BLACK PBT 2MM DOUBLE ROW FEMALE IDC ASSEMBLY CONTACT: HEAT TREATED BeCu -N: NOTCH POLARIZATION -RW: REVERSE WIRING SWTRIRAEI:N 2 8R EALWIEFG: ,B 7LA/3C6K, T PINBNTED, COPPER WITH PVC INSULATOR DWG. NO. (USE TCSD-XX-XX-N) (NOT AVAILABLE WITH -RN1 OR -RN2 OPTIONS) PLATING: TCSD-XX-X-XX.XX-01-X-XXX-XXX (AVAILABLE ON POS 04 THRU 25) --LF:: ..000000001053 GGOOLLDD OONN CCOONNTTAACCTT AARREEAA,, TTIINN OONN RREEMMAAIINNDDEERR (NOT AVAILABLE WITH -RN1 OR -RN2 OPTIONS) (STANDARD PLATING IS .000030 GOLD ON CONTACT AREA, TIN ON REMAINDER) BY: B RAY 11/20/2007 SHEET 1 OF 3

REVISION BA 01 02 03 01 02 02 03 01 01 01 01 01 02 01 COLORED WIRE TO SIDE COLORED WIRE TO SIDE OF FIRST POS INDICATOR OF FIRST POS INDICATOR * COLORED WIRE MAY BE * COLORED WIRE MAY BE BLACK, BLUE, OR RED. BLACK, BLUE, OR RED. XX .125[3.18] XX±.125 [3.18] -P"XX": POLARIZED MATING (MIN 2 ") (MIN 2") NOTE: THE SAME POSITION WILL BE POLARIZED ON BOTH ENDS (USE PK-07-N) MIDDLE SOCKET REVERSED OUTSIDE SOCKET REVERSED WHEN DAISY CHAINED WHEN DAISY CHAINED -O: OUTSIDE REVERSED -M: MIDDLE REVERSED (REQUIRES -D"XX") (REQUIRES -D"XX") (NOT AVAILABLE WITH -R OR -M) (NOT AVAILABLE WITH -R OR -O) (MINIMUM 2.00[50.8], 1.00[25.4] INCREMENTS) (MINIMUM 2.00[50.8], 1.00[25.4] INCREMENTS) FIRST CONNECTOR SECOND CONNECTOR 02 TCSD-05-D-XX-01-RN2 SHOWN 01 01 01 01 01 01 02 COLORED WIRE TO SIDE OF FIRST POS INDICATOR COLORED WIRE TO SIDE * COLORED WIRE MAY BE OF FIRST POS INDICATOR BLACK, BLUE, OR RED. * COLORED WIRE MAY BE BLACK, BLUE, OR RED. XX .125[3.18] (MIN 2") -D"XX": DAISY CHAINED TCSD-05-D-XX-01-RN1 SHOWN .XX .125[3.18][6.70] (2" MIN LENGTH, 1" INCREMENTS ONLY) (MIN 2") -RN1 OR -RN2 * PROPRIETARY NOTE * THIS DOCUMENT CONTAINS CONFIDENTIAL AND (REVERSE POLARIZATION NOTCH) BOTH SOCKETS REVERSED WHEN DAISY CHAINED PROPRIETARY INFORMATION AND ALL DESIGN, MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC, INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR 520 PARK EAST BLVD, NEW ALBANY, IN 47150 -R: REVERSE CONNECTOR REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY PHONE: 812-944-6733 FAX: 812-948-5047 OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS e-Mail info@SAMTEC.com code 55322 NOTE: (-D"XX" OPTIONAL) WRITTEN CONSENT OF SAMTEC, INC. -RN1 = REVERSE NOTCH ON 1ST CONNECTOR ONLY (SHOWN ABOVE WITH -D"XX") DESCRIPTION: AVAILABLE FOR POSITIONS 4 OR GREATER (MINIMUM 2.00 [50.8] WITH 1.00 [25.4] INCREMENTS WHEN DO NOT SCALE DRAWING 2MM DOUBLE ROW FEMALE IDC ASSEMBLY (NOT AVAILABLE WITH -R OR -RW OPTIONS) USED WITH -D"XX") DWG. NO. -RN2 = REVERSE NOTCH ON 2ND CONNECTOR ONLY (NOT AVAILABLE WITH -O, -M, -RN1 OR -RN2) SHEET SCALE: 2:1 TCSD-XX-X-XX.XX-01-X-XXX-XXX (NOT AVAILABLE WITH -R OR -RW OPTIONS) (-RNX NOT AVAILABLE WITH -N & -D"XX" OPTIONS) C:\EnterpriseVault\DWG\MISC\MKTG\TCSD-XX-X-XX.XX-01-X-XXX-XXX-MKT.SLDDRW BY: B RAY 11/20/2007 SHEET 2 OF 3

REVISION BA 6 XX (No. OF POS.) x .07874[2.0000] + .31000[7.8740] REF .039 1.00 4 REF 2 5.000[127.00] MAX 2.000[50.80] MIN .310±.010 7.87±0.25 (MEASURED AT BOTH ENDS) 5 -B"XX": BREAKOUT OPTION (TCSD-10-D-XX.XX-01-X-B05 SHOWN) 3 -SR: STRAIN RELIEF (NOT AVAILABLE WITH -O, -M, -R, -D"XX" OR -B"XX") "XX" = NO. OF CONDUCTORS PER ROW BROKEN OUT FROM THE FIRST POSITION. (SAME AS -D, UNLESS OTHERWISE STATED) AND THE BREAKOUT ENDS MUST BE EQUAL TO THE FULL POSITION CONNECTOR. (SOLD IN ASSEMBLIES ONLY) (MUST USE HEAT BEND/STRAIN RELIEF TOOL ON POSITIONS 20-25) "A" "B" (XX.XX[XX INCHES x 25.4]+.5[19.1]) ±.125[3.175] 3 "A" "B" FIRST POSITION INDICATOR XX.XX[XX INCHES x 25.4] x 2 FIRST POSITION +.250[6.35] ±1% INDICATOR SECTION "A"-"A" SECTION "B"-"B" IN-PROCESS 1 (-SR ONLY) IN-PROCESS (SINGLE END ONLY) * PROPRIETARY NOTE * THIS DOCUMENT CONTAINS CONFIDENTIAL AND PROPRIETARY INFORMATION AND ALL DESIGN, 3 MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC, INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR 520 PARK EAST BLVD, NEW ALBANY, IN 47150 REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY PHONE: 812-944-6733 FAX: 812-948-5047 OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS e-Mail info@SAMTEC.com code 55322 (XX.XX[XX INCHES x 25.4] ±.125[3.175] WRITTEN CONSENT OF SAMTEC, INC. DESCRIPTION: DO NOT SCALE DRAWING 2MM DOUBLE ROW FEMALE IDC ASSEMBLY IN-PROCESS 2 DWG. NO. (-SR ONLY) SHEET SCALE: 2:1 TCSD-XX-X-XX.XX-01-X-XXX-XXX C:\EnterpriseVault\DWG\MISC\MKTG\TCSD-XX-X-XX.XX-01-X-XXX-XXX-MKT.SLDDRW BY: B RAY 11/20/2007 SHEET 3 OF 3