TCM809/TCM810 3-Pin Microcontroller Reset Monitors Features General Description • Precision V Monitor for 2.5V, 3.0V, 3.3V, 5.0V The TCM809 and TCM810 are cost-effective system DD Nominal System Voltage Supplies supervisor circuits designed to monitor V in digital DD (cid:127) 140msec Minimum RESET Time Out Period systems and provide a reset signal to the host proces- sor, when necessary. No external components are (cid:127) RESET Output to V = 1.0V (TCM809) DD required. (cid:127) Low Supply Current, 9µA (typ.) The RESET output is typically driven active within (cid:127) V Transient Immunity DD 65µsec of V falling through the reset voltage thresh- (cid:127) Small 3-Pin SC-70 and SOT-23B Packages DD old. RESET is maintained active for a minimum of (cid:127) No External Components 140msec after V rises above the reset threshold. DD (cid:127) Push-Pull RESET Output The TCM810 has an active-high RESET output, while (cid:127) Temperature Range: the TCM809 has an active-low RESET output. The out- - Industrial, SC-70 (E): -40°C to +85°C put of the TCM809/TCM810 is valid down to VDD = 1V. Both devices are available in 3-Pin SC-70 and SOT-23B - Extended, SOT-23, SC-70 (V): -40°C to +125°C packages. Applications The TCM809/TCM810 is optimized to reject fast transient glitches on the V line. A low supply current DD (cid:127) Computers of 9µA (typ., V = 3.3V) make these devices suitable DD (cid:127) Embedded Systems for battery-powered applications. (cid:127) Battery-Powered Equipment Pin Configurations (cid:127) Critical Microcontroller Power Supply Monitoring (cid:127) Automotive SOT-23B/SC-70 Typical Application Circuit GND 1 V DD TT CC V3 VDD M8M8 3 VDD DD PICmicro® 1009 TCM809 Microcontroller TCM809 RESET / 2 2 RESET TCM810 (RESET) RESET INPUT (Active-Low) GND Note: 3-Pin SOT-23B is equivalent to GND JEDEC TO-236. 1  2004 Microchip Technology Inc. DS21661C-page 1

TCM809/TCM810 1.0 ELECTRICAL PIN FUNCTION TABLE CHARACTERISTICS NAME FUNCTION Absolute Maximum Ratings† GND Ground. Supply Voltage (VDD to GND)..........................................6.0V RESET (TCM809) RESET push-pull output RESET, RESET....................................– 0.3V to (VDD +0.3V) remains low while VDD is below the reset voltage threshold and Input Current, V .........................................................20mA DD for 240msec (140msec min.) Output Current, RESET, RESET...................................20mA after V rises above reset DD dV/dt (V ).............................................................100V/µsec DD threshold. Operating Temperature Range....................– 40°C to +125°C RESET (TCM810) RESET push-pull output Power Dissipation (T = 70°C): A remains high while V is below 3-Pin SOT-23B (derate 4mW/°C above +70°C)......320mW DD the reset voltage threshold and 3-Pin SC-70 (derate 2.17mW/°C above +70°C)......174mW for 240msec (140msec min.) Storage Temperature Range.......................– 65°C to +150°C after V rises above reset DD Maximum Junction Temperature, TJ..............................150°C threshold. † Notice: Stresses above those listed under “Maximum ratings” may cause permanent damage to the device. This is a stress rating only and VDD Supply voltage (+2.5V, +3.0V, functional operation of the device at those or any other conditions +3.3V, +5.0V). above those indicated in the operational listings of this specification is not implied. Exposure to maximum rating conditions for extended peri- ods may affect device reliability. ELECTRICAL CHARACTERISTICS V = Full Range, T = Operating Temperature Range, unless otherwise noted. Typical values are at T = +25°C, DD A A V = 5V for L/M/J, 3.3V for T/S, 3.0V for R and 2.5V for Z (Note1). DD Parameter Sym Min Typ Max Units Test Conditions V Range 1.0 — 5.5 V T = 0°C to +70°C DD A 1.2 — 5.5 T = – 40°C to +125°C A Supply Current I — 12 30 µA TCM8xxL/M/J: V < 5.5V CC DD — 9 25 TCM8xxR/S/T/Z: V < 3.6V DD Reset Threshold (Note2) V 4.56 4.63 4.70 V TCM8xxL: T = +25°C TH A 4.50 — 4.75 T = – 40°C to +125°C A 4.31 4.38 4.45 V TCM8xxM: T = +25°C A 4.25 — 4.50 V T = – 40°C to +125°C A 3.93 4.00 4.06 V TCM809J: T = +25°C A 3.89 — 4.10 V T = – 40°C to +125°C A 3.04 3.08 3.11 V TCM8xxT: T = +25°C A 3.00 — 3.15 V T = – 40°C to +125°C A 2.89 2.93 2.96 V TCM8xxS: T = +25°C A 2.85 — 3.00 V T = – 40°C to +125°C A 2.59 2.63 2.66 V TCM8xxR: T = +25°C A 2.55 — 2.70 V T = – 40°C to +125°C A 2.28 2.32 2.35 V TCM8xxZ: T = +25°C A 2.25 — 2.38 V T = – 40°C to +125°C A Reset Threshold Tempco — 30 — ppm/°C V to Reset Delay, — 65 — µsec V = V to (V – 100mV) (Note2) DD DD TH TH Reset Active Time Out 140 320 560 msec Period Note 1: Production testing done at T = +25°C, overtemperature limits ensured by QC screen. A 2: RESET output for TCM809, RESET output for TCM810. DS21661C-page 2  2004 Microchip Technology Inc.

TCM809/TCM810 ELECTRICAL CHARACTERISTICS (CONTINUED) V = Full Range, T = Operating Temperature Range, unless otherwise noted. Typical values are at T = +25°C, DD A A V = 5V for L/M/J, 3.3V for T/S, 3.0V for R and 2.5V for Z (Note1). DD Parameter Sym Min Typ Max Units Test Conditions RESET Output Voltage V — — 0.3 V TCM809R/S/T/Z: V = V min, I = 1.2mA OL DD TH SINK Low (TCM809) — — 0.4 TCM809L/M/J: V = V min, I = 3.2mA DD TH SINK — — 0.3 V > 1.0V, I = 50µA DD SINK RESET Output Voltage V 0.8 V — — V TCM809R/S/T/Z: V > V max, I = 500µA OH DD DD TH SOURCE High (TCM809) V – 1.5 — — TCM809L/M/J: V > V max, I = 800µA DD DD TH SOURCE RESET Output Voltage V — — 0.3 V TCM810R/S/T/Z:V = V max, I = 1.2mA OL DD TH SINK Low (TCM810) — — 0.4 TCM810L/M: V = V max, I = 3.2mA DD TH SINK RESET Output Voltage V 0.8 V — — V 1.8 < V < V min, I = 150µA OH DD DD TH SOURCE High (TCM810) Note 1: Production testing done at T = +25°C, overtemperature limits ensured by QC screen. A 2: RESET output for TCM809, RESET output for TCM810.  2004 Microchip Technology Inc. DS21661C-page 3

TCM809/TCM810 2.0 TYPICAL PERFORMANCE CHARACTERISTICS Note: The graphs and tables provided following this note are a statistical summary based on a limited number of samples and are provided for informational purposes only. The performance characteristics listed herein are not tested or guaranteed. In some graphs or tables, the data presented may be outside the specified operating range (e.g., outside specified power supply range) and therefore outside the warranted range. 18 TCM8xx/R/S/T/Z, No Load 450 16 VDD = 5V 400 14 Supply Current ( µA) 11246802 VVDDDD == 13VV Power-up Reset Timeout (µsec) 11223305050550000000 0 -40 -20 0 20 40 60 80 100 120 0 -40 -20 0 20 40 60 80 100 120 Temperature (°C) Temperature (°C) FIGURE 2-1: Supply Current vs. FIGURE 2-3: Power-up Reset Time Out Temperature. vs. Temperature. 16 1.001 TCM8xx/L/M/J, No Load 14 VDD = 5V Supply Current ( µA) 1146802 VDVDD D= =3 V1V Normalized Reset Threshold 00..9999891 2 0 0.997 -40 -20 0 20 40 60 80 100 120 -40 -20 0 20 40 60 80 100 120 Temperature (°C) Temperature (°C) FIGURE 2-2: Supply Current vs. FIGURE 2-4: Normalized Reset Temperature. Threshold vs. Temperature. DS21661C-page 4  2004 Microchip Technology Inc.

TCM809/TCM810 3.0 APPLICATIONS INFORMATION Combinations above the curve are detected as a brown-out or power-down condition. Transient immu- nity can be improved by adding a capacitor in close 3.1 V Transient Rejection DD proximity to the V pin of the TCM809/TCM810. DD The TCM809/TCM810 provides accurate V monitor- DD ing and reset timing during power-up, power-down and 3.2 RESET Signal Integrity During brown-out/sag conditions. These devices also reject Power-Down negative-going transients (glitches) on the power sup- ply line. Figure3-1 shows the maximum transient dura- The TCM809 RESET output is valid to VDD = 1.0V. tion vs. maximum negative excursion (overdrive) for Below this voltage the output becomes an "open cir- glitch rejection. Any combination of duration and over- cuit" and does not sink current. This means CMOS drive that lies under the curve will not generate a reset logic inputs to the microcontroller will be floating at an signal. undetermined voltage. Most digital systems are completely shut down well above this voltage. However, in situations where RESET must be main- V DD tained valid to V = 0V, a pull-down resistor must be DD V connected from RESET to ground to discharge stray TH capacitances and hold the output low (Figure3-2). This Overdrive resistor value, though not critical, should be chosen such that it does not appreciably load RESET under normal operation (100kΩ will be suitable for most Duration applications). Similarly, a pull-up resistor to V is DD c) 400 required for the TCM810 to ensure a valid high RESET e T = +25°C µs A for VDD below 1.0V. n ( 320 o rati V u DD D 240 nt e nsi 160 V a DD m Tr TCM8XXL/M/J (SOT-23) u 80 TCM809 m Maxi 0 T(SCOMT8-X23X)Z/R/S/T RESET 1 5 100 1000 Reset Comparator Overdrive R 1 [V - V ] (mv) GND 100kΩ TH DD 130 c) 120 µse 110 TCM8XXL/M/J (SC-70) FIGURE 3-2: The addition of R1 at the y ( 100 RESET output of the TCM809 ensures that the a Del 90 RESET output is valid to VDD = 0V. et 80 s 70 e R 60 o tD 50 TCM8XXZ/R/S/T (SC-70) D V 40 30 1 10 100 1000 Reset Comparator Overdrive (mV) [V - V ] (mv) TH DD FIGURE 3-1: Maximum Transient Duration vs. Overdrive for Glitch Rejection at +25°C.  2004 Microchip Technology Inc. DS21661C-page 5

TCM809/TCM810 3.3 Controllers and Processors With Bidirectional I/O Pins Buffered RESET Buffer To Other System Some microcontrollers have bidirectional reset pins. Components Depending on the current drive capability of the control- V ler pin, an indeterminate logic level may result if there DD is a logic conflict. This can be avoided by adding a PICmicro® 4.7kΩ resistor in series with the output of the TCM809/ TCM809 Micro- controller TCM810 (Figure3-3). If there are other components in 4.7kΩ the system that require a reset signal, they should be RESET RESET buffered so as not to load the reset line. If the other components are required to follow the reset I/O of the GND GND microcontroller, the buffer should be connected as shown with the solid line. FIGURE 3-3: Interfacing the TCM809 to a Bidirectional RESET I/O. DS21661C-page 6  2004 Microchip Technology Inc.

TCM809/TCM810 4.0 PACKAGING INFORMATION 4.1 Package Marking Information 3-Pin SOT-23B 3-Pin SC-70 (cid:99)(cid:100)(cid:101)(cid:102) (cid:99) (cid:100) (cid:101) (cid:102) (cid:103) (cid:104) Top Side Bottom Side Part Number SOT-23/SC-70 TCM809LENB J1 TCM809MENB J2 TCM809TENB J3 TCM809SENB J4 TCM809RENB J5 TCM809JENB J6 TCM809ZENB J7 TCM809LVNB/TCM809LVLB JZ TCM809MVNB/TCM809MVLB JY TCM809TVNB/TCM809TVLB JX TCM809SVNB/TCM809SVLB JV TCM809RVNB/TCM809RVLB JU TCM809JVNB/TCM809JVLB JT TCM809ZVNB/TCM809ZVLB JS (SC-70 package only) Part Number SOT-23/SC-70 TCM810LENB K1 TCM810MENB K2 TCM810TENB K3 TCM810SENB K4 TCM810RENB K5 TCM810ZENB K6 TCM810LVNB/TCM810LVLB KZ TCM810MVNB/TCM810MVLB KY TCM810TVNB/TCM810TVLB KX TCM810SVNB/TCM810SVLB KV TCM810RVNB/TCM810RVLB KU Legend: 1 Part Number + temperature range and voltage (two-digit code) 2 Part Number + temperature range and voltage (two-digit code) 3 Lot ID number 4 Year and work week 5 Year and work week 6 Year and work week Note: In the event the full Microchip part number cannot be marked on one line, it will be carried over to the next line thus limiting the number of available characters for customer specific information.  2004 Microchip Technology Inc. DS21661C-page 7

TCM809/TCM810 3-Lead Plastic Small Outline Transistor (NB) (SOT-23) E E1 2 B p1 D n p 1 α c A A2 φ A1 β L Units INCHES* MILLIMETERS Dimension Limits MIN NOM MAX MIN NOM MAX Number of Pins n 3 3 Pitch p .038 0.96 Outside lead pitch (basic) p1 .076 1.92 Overall Height A .035 .040 .044 0.89 1.01 1.12 Molded Package Thickness A2 .035 .037 .040 0.88 0.95 1.02 Standoff § A1 .000 .002 .004 0.01 0.06 0.10 Overall Width E .083 .093 .104 2.10 2.37 2.64 Molded Package Width E1 .047 .051 .055 1.20 1.30 1.40 Overall Length D .110 .115 .120 2.80 2.92 3.04 Foot Length L .014 .018 .022 0.35 0.45 0.55 Foot Angle φ 0 5 10 0 5 10 Lead Thickness c .004 .006 .007 0.09 0.14 0.18 Lead Width B .015 .017 .020 0.37 0.44 0.51 Mold Draft Angle Top α 0 5 10 0 5 10 Mold Draft Angle Bottom β 0 5 10 0 5 10 * Controlling Parameter § Significant Characteristic Notes: Dimensions D and E1 do not include mold flash or protrusions. Mold flash or protrusions shall not exceed .010” (0.254mm) per side. JEDEC Equivalent: TO-236 Drawing No. C04-104 DS21661C-page 8  2004 Microchip Technology Inc.

TCM809/TCM810 3-Lead Plastic Small Outline Transistor (LB) (SC-70) E E1 B 2 p1 D 3 p 1 a c A A2 b L A1 Units INCHES MILLIMETERS* Dimension Limits MIN MAX MIN MAX Number of Pins 3 3 Pitch p .026 BSC. 0.65 BSC. Outside lead pitch (basic) p1 .051 BSC. 1.30 BSC. Overall Height A .031 .043 0.80 1.10 Molded Package Thickness A2 .031 .039 0.80 1.00 Standoff A1 .000 .0004 0.00 .010 Overall Width E .071 .094 1.80 2.40 Molded Package Width E1 .045 .053 1.15 1.35 Overall Length D .071 .089 1.80 2.25 Foot Length L .004 .016 0.10 0.41 Lead Thickness c .003 .010 0.08 0.25 Lead Width B .006 .016 0.15 0.40 Mold Draft Angle Top a 8˚ 12˚ 8˚ 12˚ Mold Draft Angle Bottom b 8˚ 12˚ 8˚ 12˚ *Controlling Parameter Notes: Dimensions D and E1 do not include mold flash or protrusions. Mold flash or protrusions shall not exceed .005" (0.127mm) per side. JEITA (EIAJ) Equivalent: SC70 Drawing No. C04-104  2004 Microchip Technology Inc. DS21661C-page 9

TCM809/TCM810 4.2 Product Tape and Reel Specifications FIGURE 4-1: EMBOSSED CARRIER DIMENSIONS (8, 12, 16, AND 24 MM TAPE ONLY) Top Cover Tape A 0 W K0 B0 P TABLE 1: CARRIER TAPE/CAVITY DIMENSIONS Carrier Cavity Dimensions Dimensions Output Reel Case Package Quantity Diameter in Outline Type W P A0 B0 K0 Units mm mm mm mm mm mm NB SOT-23 3L 8 4 3.15 2.77 1.22 3000 180 LB SC-70 3L 8 4 2.4 2.4 1.19 3000 180 FIGURE 4-2: 3-LEAD SOT-23/SC70 DEVICE TAPE AND REEL SPECIFICATIONS gnikraM Device User Direction of Feed eciveD Marking W, Width Pin 1 of Carrier Tape Pin 1 P, Pitch Standard Reel Component Orientation Reverse Reel Component Orientation DS21661C-page 10  2004 Microchip Technology Inc.

TCM809/TCM810 PRODUCT IDENTIFICATION SYSTEM To order or obtain information, e.g., on pricing or delivery, refer to the factory or the listed sales office. PART NO. X X XXXXX Examples: a) TCM809LENB713: SOT-23B-3-TR, Device VDD Temperature Package Microcontroller 4.63V Reset Range Reset Monitor, Threshold -40°C to +85°C, Tape and Reel. b) TCM809LVLB713: SC-70-3-TR, Device: TCM809: Supervisor circuit with active-low RESET output Microcontroller 4.63V TCM810: Supervisor circuit with active-high RESET output Reset Monitor, -40°C to +125°C, Tape and Reel. V Reset Threshold: L = 4.63V DD c) TCM809LVNB713: SOT-23B-3-TR, M = 4.38V Microcontroller 4.63V J = 4.00V Reset Monitor, T = 3.08V -40°C to +125°C, S = 2.93V Tape and Reel. R = 2.63V Z = 2.32V a) TCM810MENB713: SOT-23B-3-TR, Microcontroller 4.38V Temperature Range: E = -40°C to +85°C Reset Monitor, V = -40°C to +125°C -40°C to +85°C, Tape and Reel. b) TCM810RVLB713: SOT-23B-3-TR, Package: NB713 = SOT-23B, 3-pin (Tape and Reel) Microcontroller 2.63V LB713 = SC-70, 3-pin (Tape and Reel) Reset Monitor, -40°C to +125°C, Tape and Reel. c) TCM810TVLB713: SC-70-3-TR, Microcontroller 4.38V Reset Monitor, -40°C to +125°C, Tape and Reel. Sales and Support Data Sheets Products supported by a preliminary Data Sheet may have an errata sheet describing minor operational differences and recommended workarounds. To determine if an errata sheet exists for a particular device, please contact one of the following: 1. Your local Microchip sales office 2. The Microchip Corporate Literature Center U.S. FAX: (480) 792-7277 3. The Microchip Worldwide Site (www.microchip.com) Please specify which device, revision of silicon and Data Sheet (include Literature #) you are using. Customer Notification System Register on our web site (www.microchip.com/cn) to receive the most current information on our products.  2004 Microchip Technology Inc. DS21661C-page 11

TCM809/TCM810 NOTES: DS21661C-page 12  2004 Microchip Technology Inc.

Note the following details of the code protection feature on Microchip devices: (cid:127) Microchip products meet the specification contained in their particular Microchip Data Sheet. (cid:127) Microchip believes that its family of products is one of the most secure families of its kind on the market today, when used in the intended manner and under normal conditions. (cid:127) There are dishonest and possibly illegal methods used to breach the code protection feature. All of these methods, to our knowledge, require using the Microchip products in a manner outside the operating specifications contained in Microchip’s Data Sheets. Most likely, the person doing so is engaged in theft of intellectual property. (cid:127) Microchip is willing to work with the customer who is concerned about the integrity of their code. (cid:127) Neither Microchip nor any other semiconductor manufacturer can guarantee the security of their code. Code protection does not mean that we are guaranteeing the product as “unbreakable.” Code protection is constantly evolving. We at Microchip are committed to continuously improving the code protection features of our products. Attempts to break Microchip’s code protection feature may be a violation of the Digital Millennium Copyright Act. If such acts allow unauthorized access to your software or other copyrighted work, you may have a right to sue for relief under that Act. Information contained in this publication regarding device Trademarks applications and the like is intended through suggestion only The Microchip name and logo, the Microchip logo, Accuron, and may be superseded by updates. It is your responsibility to dsPIC, KEELOQ, MPLAB, PIC, PICmicro, PICSTART, ensure that your application meets with your specifications. PROMATE, PowerSmart and rfPIC are registered No representation or warranty is given and no liability is trademarks of Microchip Technology Incorporated in the assumed by Microchip Technology Incorporated with respect U.S.A. and other countries. to the accuracy or use of such information, or infringement of patents or other intellectual property rights arising from such AmpLab, FilterLab, microID, MXDEV, MXLAB, PICMASTER, use or otherwise. Use of Microchip’s products as critical SEEVAL, SmartShunt and The Embedded Control Solutions components in life support systems is not authorized except Company are registered trademarks of Microchip Technology with express written approval by Microchip. No licenses are Incorporated in the U.S.A. conveyed, implicitly or otherwise, under any intellectual Application Maestro, dsPICDEM, dsPICDEM.net, property rights. dsPICworks, ECAN, ECONOMONITOR, FanSense, FlexROM, fuzzyLAB, In-Circuit Serial Programming, ICSP, ICEPIC, Migratable Memory, MPASM, MPLIB, MPLINK, MPSIM, PICkit, PICDEM, PICDEM.net, PICtail, PowerCal, PowerInfo, PowerMate, PowerTool, rfLAB, Select Mode, SmartSensor, SmartTel and Total Endurance are trademarks of Microchip Technology Incorporated in the U.S.A. and other countries. SQTP is a service mark of Microchip Technology Incorporated in the U.S.A. All other trademarks mentioned herein are property of their respective companies. © 2004, Microchip Technology Incorporated, Printed in the U.S.A., All Rights Reserved. Printed on recycled paper. Microchip received ISO/TS-16949:2002 quality system certification for its worldwide headquarters, design and wafer fabrication facilities in Chandler and Tempe, Arizona and Mountain View, California in October 2003. The Company’s quality system processes and procedures are for its PICmicro® 8-bit MCUs, KEELOQ® code hopping devices, Serial EEPROMs, microperipherals, nonvolatile memory and analog products. In addition, Microchip’s quality system for the design and manufacture of development systems is ISO 9001:2000 certified.  2004 Microchip Technology Inc. DS21661C-page 13

WORLDWIDE SALES AND SERVICE AMERICAS China - Beijing Korea Corporate Office Unit 706B 168-1, Youngbo Bldg. 3 Floor Wan Tai Bei Hai Bldg. Samsung-Dong, Kangnam-Ku 2355 West Chandler Blvd. No. 6 Chaoyangmen Bei Str. Seoul, Korea 135-882 Chandler, AZ 85224-6199 Beijing, 100027, China Tel: 82-2-554-7200 Fax: 82-2-558-5932 or Tel: 480-792-7200 Tel: 86-10-85282100 82-2-558-5934 Fax: 480-792-7277 Fax: 86-10-85282104 Singapore Technical Support: 480-792-7627 Web Address: http://www.microchip.com China - Chengdu 200 Middle Road Rm. 2401-2402, 24th Floor, #07-02 Prime Centre Atlanta Ming Xing Financial Tower Singapore, 188980 3780 Mansell Road, Suite 130 No. 88 TIDU Street Tel: 65-6334-8870 Fax: 65-6334-8850 Alpharetta, GA 30022 Chengdu 610016, China Taiwan Tel: 770-640-0034 Tel: 86-28-86766200 Kaohsiung Branch Fax: 770-640-0307 Fax: 86-28-86766599 30F - 1 No. 8 Boston China - Fuzhou Min Chuan 2nd Road 2 Lan Drive, Suite 120 Unit 28F, World Trade Plaza Kaohsiung 806, Taiwan Westford, MA 01886 No. 71 Wusi Road Tel: 886-7-536-4818 Tel: 978-692-3848 Fuzhou 350001, China Fax: 886-7-536-4803 Fax: 978-692-3821 Tel: 86-591-7503506 Taiwan Chicago Fax: 86-591-7503521 Taiwan Branch 333 Pierce Road, Suite 180 China - Hong Kong SAR 11F-3, No. 207 Itasca, IL 60143 Unit 901-6, Tower 2, Metroplaza Tung Hua North Road Tel: 630-285-0071 223 Hing Fong Road Taipei, 105, Taiwan Fax: 630-285-0075 Kwai Fong, N.T., Hong Kong Tel: 886-2-2717-7175 Fax: 886-2-2545-0139 Dallas Tel: 852-2401-1200 EUROPE 4A5d7d0is oWne, sTtgXr o7v5e0 0D1rive, Suite 160 FCahxi:n 8a5 2-- S24h0a1n-3g4h3a1i Austria Tel: 972-818-7423 Room 701, Bldg. B Durisolstrasse 2 Fax: 972-818-2924 Far East International Plaza A-4600 Wels No. 317 Xian Xia Road Austria Detroit Shanghai, 200051 Tel: 43-7242-2244-399 Tri-Atria Office Building Tel: 86-21-6275-5700 Fax: 43-7242-2244-393 32255 Northwestern Highway, Suite 190 Fax: 86-21-6275-5060 Denmark Farmington Hills, MI 48334 China - Shenzhen Regus Business Centre Tel: 248-538-2250 Lautrup hoj 1-3 Fax: 248-538-2260 Rm. 1812, 18/F, Building A, United Plaza Ballerup DK-2750 Denmark No. 5022 Binhe Road, Futian District Kokomo Tel: 45-4420-9895 Fax: 45-4420-9910 Shenzhen 518033, China 2767 S. Albright Road Tel: 86-755-82901380 France Kokomo, IN 46902 Fax: 86-755-8295-1393 Parc d’Activite du Moulin de Massy Tel: 765-864-8360 China - Shunde 43 Rue du Saule Trapu Fax: 765-864-8387 Batiment A - ler Etage Room 401, Hongjian Building, No. 2 Los Angeles Fengxiangnan Road, Ronggui Town, Shunde 91300 Massy, France Tel: 33-1-69-53-63-20 18201 Von Karman, Suite 1090 District, Foshan City, Guangdong 528303, China Fax: 33-1-69-30-90-79 Irvine, CA 92612 Tel: 86-757-28395507 Fax: 86-757-28395571 Germany Tel: 949-263-1888 China - Qingdao Fax: 949-263-1338 Rm. B505A, Fullhope Plaza, SDt-e8i5n7h3e7ils Itsramsasnei n1g0, Germany San Jose No. 12 Hong Kong Central Rd. Tel: 49-89-627-144-0 1300 Terra Bella Avenue Qingdao 266071, China Fax: 49-89-627-144-44 Mountain View, CA 94043 Tel: 86-532-5027355 Fax: 86-532-5027205 Italy Tel: 650-215-1444 India Via Quasimodo, 12 Fax: 650-961-0286 Divyasree Chambers 20025 Legnano (MI) Toronto 1 Floor, Wing A (A3/A4) Milan, Italy 6MTe2ils8:s 59i s0Ns5oa-ru6tg7ha3a,-m 0O 6Dn9rt9aiv r eio, SL4uVite 1 1X058, Canada NBTJeaaoln.:p g19a1a1n,l-o 8Or0e’-S,2 h52a62u09g 00n02e65s1,s IeFnyad xiRa: o9a1d-80-22290062 TFNeaelx:t :3h 39e9-r0-l03a33n31d1-7-s44626671811 Fax: 905-673-6509 P. A. De Biesbosch 14 Benex S-1 6F NL-5152 SC Drunen, Netherlands ASIA/PACIFIC 3-18-20, Shinyokohama Tel: 31-416-690399 Kohoku-Ku, Yokohama-shi Fax: 31-416-690340 Australia Kanagawa, 222-0033, Japan United Kingdom Suite 22, 41 Rawson Street Tel: 81-45-471- 6166 Fax: 81-45-471-6122 505 Eskdale Road Epping 2121, NSW Winnersh Triangle Australia Wokingham Tel: 61-2-9868-6733 Berkshire, England RG41 5TU Fax: 61-2-9868-6755 Tel: 44-118-921-5869 Fax: 44-118-921-5820 02/17/04 DS21661C-page 14  2004 Microchip Technology Inc.

Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: M icrochip: TCM810LENB713 TCM810MENB713 TCM810JENB713 TCM810RENB713 TCM810TENB713 TCM810SENB713 TCM809LVLB713 TCM809JVLB713 TCM809MVLB713 TCM810MVLB713 TCM810JVLB713 TCM810LVLB713 TCM810ZENB713 TCM810JVNB713 TCM810LVNB713 TCM809MVNB713 TCM809LVNB713 TCM809SVNB713 TCM809TVNB713 TCM809RVNB713 TCM809JENB713 TCM809LENB713 TCM809MENB713 TCM810TVNB713 TCM810RVNB713 TCM810SVNB713 TCM810ZVLB713 TCM809RENB713 TCM809SENB713 TCM809TENB713 TCM809ZVNB713 TCM809TVLB713 TCM809RVLB713 TCM809SVLB713 TCM809ZVLB713 TCM810SVLB713 TCM810TVLB713 TCM810RVLB713