Available at Digi-Key** Improved Performance www.digikey.com 5x7mm TB / TVB Model Series TCXO / VCTCXO Description: Features: 2111 Comprehensive Drive Connor-Winfield's TBxxx • Frequency Stabilities Available: Aurora, Illinois 60505 and TVBxxx series +/-0.28 ppm (10 to 50 MHz) PFhaoxn:e 6: 3603-08-5815-15-0447202 aVrCeT 5CxX7Om mpr oTdCuXcOts a wnidth TV1B05.004M1H2Z42 (+1/0- 0to.5 100 p0p MmH, +z)/-1.00 ppm or +/-2.00 ppm • Temperature Ranges Available: www.conwin.com exceptional frequency 0 to 85°C, 0 to 70°C, -40 to 85°C or -20 to 70°C stability and low phase • Packages Available: noise. TB - Series: 5 x 7mm - 10 Pad Similar to our Txxx TVB - Series: 5 x 7mm - 4 Pad / TVxxx series, these devices are quieter, • 3.3 Vdc Operation smoother over temperature and are available at • Output Logic: LVCMOS or Clipped Sinewave higher frequencies. • Fixed Frequency - TCXO Using the latest analog TCXO technology, the TBxxx and TVBxxx series have improved • Voltage Controlled - VCTCXO phase noise and frequency stability • Low Jitter <0.50 ps RMS performance and are available in 4-pad or 10- • Low Phase Noise pad surface mount footprints. • Tri-State Enable/Disable: (TB - Model Series Only) These products are designed for • Tape and Reel Packaging such applications as IEEE 1588 PTP and • RoHS Compliant / Lead Free Synchronous Ethernet. Applications: • IEEE 1588 Applications • Synchronous Ethernet slave clocks, ITU-T G.8262 EEC options 1 & 2 • Compliant to Stratum 3, GR-1244-CORE & GR-253-CORE • Wireless Communications • Small Cells • Test and Measurement • GPS Applications Standard Frequencies Available * * 10, 12.8, 19.2, 19.44, 20, 25, 40, 50, 52, 54, 80 and 100 MHz Available frequencies from the factory for small quantity orders or quick delivery. Additional frequencies are available. ** Not all options available at Digi-Key Ordering Information TVB 5 0 4 - 010.0M Frequency Features Type / Package Temperature Stability Output Frequency TCXO / VCTCXO Range Series 2 = TCXO, LVCMOS, 3.3 Vdc Frequency Format 0 = ±0.28 ppm 3 = TCXO, Clipped Sinewave, 3.3 Vdc -xxx.xM Min* 3 = 0 to 85 °C TB = 5.0x7.0 mm 1 = ±0.50 ppm 4 = VCTCXO, LVCMOS, 3.3 Vdc -xxx.xxxxxxM Max* 10 Pads 5 = 0 to 70°C 2 = ±1.00 ppm 5 = VCTCXO, Clipped Sinewave, 3.3 Vdc *Minimum of 1 digit after TVB = 5.0x7.0 mm 6 = -40 to 85°C the decimal point, and 4 Pads 7 = -20 to 70°C 3 = ±2.00 ppm 9 = VreCdTuCcXeOd ,p LuVllC raMnOgSe, 3.3V with Maximum of 6 Example: Part Number TVB504-010.0M = 5x7mm 4 pad package, ±0.28 ppm, 0 to 70°C, 3.3 Vdc, LVCMOS Output, VCTCXO Bulletin Tx380 TB715-012.8M = 5x7mm 10 pad package, ±0.50 ppm, -20 to 70°C, 3.3 Vdc, Clipped Sinewave Output, VCTCXO TB522-050.0M = 5x7mm 10 pad package, ±1.0 ppm, 0 to 70°C, 3.3 Vdc, LVCMOS Output, TCXO Page 1 of 6 TVB602-010.0M = 5x7mm 4 pad package, ±0.28 ppm, -40 to 85°C, 3.3 Vdc, LVCMOS Output, TCXO Revision 10 Date 07 Aug 2018

2111 Comprehensive Drive Aurora, Illinois 60505 Phone: 630-851-4722 Fax: 630-851-5040 www.conwin.com Absolute Maximum Ratings Parameter Minimum Nominal Maximum Units Notes Storage Temperature -55 - 95 °C Supply Voltage (Vcc) -0.5 - 6.0 Vdc Input Voltage -0.5 - Vcc + 0.5 Vdc Operating Specifications Parameter Minimum Nominal Maximum Units Notes Output Frequency (Fo) Models TBx0x, TVBx0x 10 - 50 MHz Models TBx1x, TVBx1x 10 - 100 MHz Models TBx2x, TVBx2x 10 - 100 MHz Models TBx3x, TVBx3x 10 - 100 MHz Operating Temperature Range (See Ordering Information for full part number) Models TB3xx, TVB3xx 0 - 85 °C Models TB5xx, TVB5xx 0 - 70 °C Models TB6xx, TVB6xx -40 - 85 °C Models TB7xx, TVB7xx -20 - 70 °C Frequency Calibration @ 25 °C -1.0 - 1.0 ppm 1 Frequency Stability (See Ordering Information for full part number) Per STRATUM 3 GR-1244-CORE Frequency Stability ±0.28 ppm is only available in the frequency range of 10 to 50 MHz. Models TBx0x, TVBx0x -0.28 - 0.28 ppm 2 Holdover Stability -0.32 - 0.32 ppm 3 Constant Temperature Stability -40 - 40 ppb Over 24 Hrs. Frequency Stability (See Ordering Information for full part number) Models TBx1x, TVBx1x -0.50 - 0.50 ppm 2 Models TBx2x, TVBx2x -1.00 - 1.00 ppm 2 Models TBx3x, TVBx3x -2.00 - 2.00 ppm 2 Frequency vs. Load Stability -0.05 - 0.05 ppm ±5% Frequency vs. Voltage Stability -0.05 - 0.05 ppm ±5% Static Temperature Hysteresis - - 0.40 ppm 4 Freq. shift after reflow soldering -1.0 - 1.0 ppm 5 Long Term Stability -1.0 - 1.0 ppm 6 Aging per Life (20 Years) -3.0 - 3.0 ppm per Day -40 - 40 ppb Total Frequency Tolerance -4.6 - 4.6 ppm 7 Supply Voltage (Vcc) 3.135 3.30 3.465 Vdc Supply Current (Icc) LVCMOS (10 to 52 MHz) - 2.1 6.0 mA LVCMOS (>52 to 100 MHz) - - 12 mA Clipped Sine (10 to 52 MHz) - 1.3 2.9 mA Clipped Sine (>52 to 100 MHz) - - 12 mA Jitter: Period Jitter - 3.0 5.0 ps RMS Integrated Phase Jitter (12K to Fo/2) - 0.3 1.0 ps RMS 8 Allan Deviation (1s) Fo=10.0 MHz - 1.0E-10 - Typical SSB Phase Noise For Fo 10.0 MHz 50.0 MHz 100.0 MHz @ 10 Hz offset -98 -70 -60 dBc/Hz @ 100 Hz offset -125 -100 -91 dBc/Hz @ 1 KHz offset -143 -122 -119 dBc/Hz @ 10 KHz offset -151 -145 -142 dBc/Hz @ 100 KHz offset -152 -150 -153 dBc/Hz @ 1 MHz offset -155 -152 -153 dBc/Hz Start-Up Time - - 10 ms Bulletin Tx380 Page 2 of 6 Revision 10 Date 07 Aug 2018 Specifications subject to change without notification. See Connor-Winfield's website for latest revision. © Copyright 2018 The Connor-Winfield Corporation Not intended for life support applications.

2111 Comprehensive Drive Aurora, Illinois 60505 Phone: 630-851-4722 Fax: 630-851-5040 www.conwin.com Control Voltage Input Characteristics ParameterMinimum Minimum Nominal Maximum Units Notes Control Voltage 0.3 1.65 3.0 V Frequency Pullability Pull Range Options 4 and 5: ±10 ±12 - ppm Pull Range Option 9: ±5 ±6 ±8 ppm Pull Slope (Vc=1.65V) Pull Range Options 4 and 5: - 8.00 - ppm/V Pull Range Option 9: - 4.50 - ppm/V Control Voltage Slope Positive Slope Monotonic Linearity - - 5 % Input Impedance 100K - - Ohm Modulation Bandwidth (3dB) 10 - - KHz OE Enable /Disable Input Characteristics (Pad 8) TB Series only Parameter Minimum Nominal Maximum Units Notes Enable Voltage (High) 70%Vcc - - Vdc 9 Disable Voltage (Low) - - 30%Vcc Vdc 9 Function Output Low: Disabled (High Impedance) High or Open: Enabled LVCMOS Output Characteristics Parameter Minimum Nominal Maximum Units Notes Load (CL) - 15 - pF 10 Voltage (High) (Voh) 90%Vcc - - Vdc (Low) (Vol) - - 10%Vcc Vdc Current (High) (Ioh) -4 - - mA (Low) (Iol) - - 4 mA Duty Cycle at 50% of Vcc 45 50 55 % Rise / Fall Time 10% to 90% - 4 8 ns Clipped Sinewave Output Characteristics Parameter Minimum Nominal Maximum Units Notes Load (RC) 11 Output Load Resistance - 10K - Ohm 12 Output Load Capacitance - 10 - pF Output Voltage(< 40 MHz) 1.0 1.2 - V pk-pk Output Voltage(=>40 MHz) 0.8 1.0 - V pk-pk Output Impedance - 200 - Ohms Package Characteristics Package Hermetically sealed ceramic package with grounded metal cover Environmental Characteristics Vibration: Vibration per Mil Std 883E Method 2007.3 Test Condition A. Shock: Mechanical Shock per Mil Std 883E Method 2002.4 Test Condition B. Soldering Process: RoHS compliant lead free. See soldering profile on page 6. Notes: 1. Initial calibration @ 25°C. ±2°C, for VCTCXO's Vc = 1.65V. Specifications at time of shipment 2. Frequency stability vs. change in temperature. [±(Fmax-Fmin)/(2*Fo]). For VCTCXO, Vc = 1.65Vdc 3. Inclusive of frequency stability, supply voltage change (±1%), aging, for 24 hours. Per STRATUM 3 GR-1244-CORE. 4. Frequency change after reciprocal temperature ramped over the operating range. Frequency measured before and after at 25°C 5. Two consecutive solder reflows after 1 hour recovery @ 25°C. 6. Frequency drift over 1 year @ 25°C. 7. Inclusive of calibration @ 25°C, frequency vs. change in temperature, change in supply voltage (±5%), load change (±5%), reflow soldering process and 20 years aging. 8. For Fo<40MHz, BW=12kHz to Fo/2, for Fo>40MHz, BW=12kHz to 20MHz 9. Ouput is active with Pad 8 not connected. Leave Pad 8 open if disable function is not required. When disabled, output stage is off but oscillator and compensation circuits are still powered (current consumption <2 mA) 10. Attention: To achieve optimal frequency stability, and in some cases to meet the specification stated on this data sheet, it is Bulletin Tx380 required that the circuit connected to this TCXO output must have the equivalent input capacitance that is specified by the nominal load capacitance. Deviations from the nominal load capacitance will have a graduated effect on the stability of Page 3 of 6 approximately 20 ppb per pF load difference. Revision 10 11. Load components are required for proper operation of the device. Date 07 Aug 2018 12. Output is AC coupled. Specifications subject to change without notification. See Connor-Winfield's website for latest revision. © Copyright 2018 The Connor-Winfield Corporation Not intended for life support applications.

2111 Comprehensive Drive Aurora, Illinois 60505 Phone: 630-851-4722 Fax: 630-851-5040 www.conwin.com TB Series TB Series TB Series Package Outline Suggested Pad Layout Pad Connections 0.095Max. 0.276±0.006 (2.4mm) 0.295 (7.0mm) (7.490m.0m3)0 (10.2.085m1m) 1: Do Not Connect (0.76mm) KeepOutArea 2: Do Not Connect TB1721.581M2H4Z2 (5±00..0.10m907m6) (00.9.043m7m) 9 8Top7View6 5 34:: DGoro Nunodt Connect 0.215 5: Output (5.46mm) 10 4 Pin1 0.025(6Places) 1 2 3 (10.2.085m1m) 6: Do Not Connect (0.635mm) 0.040 7: Do Not Connect 1 2 3 (1.02mm) 8: Enable / Disable (OE) 10 4 (6Places) (0.07.6023m0m) Bottom 0.100 9: Supply Voltage (Vcc (4Places) View (2.54mm) 10: VCTCXO: Control Voltage (Vc) 9 5 8 7 6 * Do not route any traces in the keep out area. It is TCXO: N/C DimensionalTolerance: (0.09.6053m8m) 0.100 ±.005(.127mm) raerceoa mism toe nbdee gdr othuen dn epxlat nlaey.er under the keep out (4Places) (2.54mm) ±.02 (.508mm) TVB Series TVB Series TVB Series Package Outline Suggested Pad Layout Pad Connections 0.276±0.006 0.095Max. (7.0mm) (2.4mm) 0.071 (1.8mm) 4Places 4 3 0.197 TVB5041242 ±0.006 1: VCTCXO: Voltage Control (Vc) 10.0MHZ (5.0mm) 0.165 0.047 TCXO: N/C (4.2mm) (TopView) (1.2mm) 2: Ground Pad1 (TopView) 4Places 3: Output Keep 1 2 Out * 4: Supply (Vcc) DimensionalTolerance: 1 0.224 2 Area ±.005(.127mm) 0.034 (BottomView) (5.7mm) ±.02 (.508mm) (0.90mm) (4Places) 4 3 * Do not route any traces in the keep out area. It is 0.055 recommended the next layer under the keep out (1.40mm) area is to be ground plane. (4Places) Marking Information The following are examples of possible marking configurations 2 CHARACTER DATE CODE Y = Year M = Month 8 = 2018 A = January 9 = 2019 B = February 0 = 2020 C = March 1 = 2021 D = April E = May F = June G = July H = August J = September K = October M = November N = December Bulletin Tx380 Page 4 of 6 Revision 10 Date 07 Aug 2018 Specifications subject to change without notification. See Connor-Winfield's website for latest revision. © Copyright 2018 The Connor-Winfield Corporation Not intended for life support applications.

2111 Comprehensive Drive Aurora, Illinois 60505 Phone: 630-851-4722 Fax: 630-851-5040 www.conwin.com TB Series Design Recommendations TVB Series Design Recommendations Vaccla,rsgheouclodphpaevre Vaccla,rsgheouclodphpaevre 0.010”(0.254mm) Caoreninandefuoccrttraaend0cu.e0c.1eudF 0R.e01c0o”m(0m.2e5n4dmemd) Vcc 5<01”Obhymdetrsaigcne Caoreninandefuoccrttraaend0cu.e0c.1eudF Reicncodlemuacmrtaanencncedeed Vcc 5<01”Obhymdetrsaigcne bypasscapacitor clearance bypasscapacitor forinternal <fr0o.m1”(t2h.e54pmadm.) 9 8 6 5 cionfopdrpuincettreafrlnnocaoeld. Buffer <fr0o.m1”(t2h.e54pmadm.) 94 35 copperflood. Buffer 10 To1pView3 4 aaresinlahadGorfguuorecolrdturcaenhonddacpu,vepce.eerd Ground TopView Ground 110TopView 24 aaresinlahadGorfguuorecolrdturcaenhonddacpu,vepce.eerd Ground TopView Ground 50OhmTrace 50OhmTrace OSC Without Output OSC Without Output Vias Buffer Vias Buffer TOPLAYER TOPLAYER GROUNDLAYER GROUNDLAYER ....... ....... BOTTOMLAYER BOTTOMLAYER TB Series TVB Series LVCMOS Test Circuit LVCMOS Output Waveform LVCMOS Test Circuit Enable/ Disable DNCDNC Vcc 8 7 6 Vcc SVuopltapglye 9 5 Output SVuopltapglye 4 3 Output 10 1 2 3 4 Ground 1 2 Ground 15pF 15pF 0By.1pausFs 1By0pnaFss VTCCTXCOXO==N/VCc DNC DNCDNC 0By.1pausFs 1By0pnaFss VTCCTXCOXO==N/VCc DNC=DoNotConnect 1V/Div TB Series TVB Series Clipped Sinewave Clipped Sinewave Clipped Sinewave Test Circuit Test Circuit Output Waveform Enable/ DisableDNCDNC Vcc 8 7 6 Vcc SVuopltapglye 9 5 Output SVuopltapglye 4 3 Output 10 1 2 3 4 Ground 1 2 Ground 0 10pF O1h0mK 10pF O1h0mK 0By.1pausFs 1By0pnaFss TCXO=N/C DNC DNCDNC 0By.1pausFs 1By0pnaFss VTCCTXCOXO==N/VCc VCTCXO=Vc DNC=DoNotConnect 200mV/Div Note: The clipped sinewave output is AC coupled Bulletin Tx380 Page 5 of 6 Revision 10 Date 07 Aug 2018 Specifications subject to change without notification. See Connor-Winfield's website for latest revision. © Copyright 2018 The Connor-Winfield Corporation Not intended for life support applications.

2111 Comprehensive Drive Aurora, Illinois 60505 Phone: 630-851-4722 Fax: 630-851-5040 www.conwin.com Typical Phase Noise Fo=10MHz TIE TVB504-010.0M: WANDERGENERATIONINASTRATUM3PLLAT0.098HzBANDWIDTH MTIE TDEV TVB504-010.0M: MTIEperGR-253-CORE TVB504-010.0M: TDEV perGR-253-CORE 5x7mm Tape and Reel Information MEETS EIA-481A AND EIAJ-1009B 700 PCS/REEL MAXIMUM. Solder Profile Temperature 260°C 260°C 220°C 180°C 1 150°C 120°C 0 10s UpTtyopi1c2a0ls 60Tytopic9a0ls Revision History MeetsIPC/JEDECJ-STD-020C Revision Date Description 00 10/23/12 Data sheet released 10/23/12 01 11/12/12 Added Digi-Key 02 02/25/13 Increased frequency range to 100 MHz 03 12/04/13 Updated available Frequencies 04 02/07/14 Removed note from Output Freq 05 02/11/14 Updated specifications 06 04/29/15 Added Additional Package Height for Select Frequencies 07 10/20/15 Updated Allan Deviation specification Bulletin Tx380 08 09/07/16 Updated Phase Noise Plot and Control Voltage Specs Page 6 of 6 09 09/15/16 Updated Ordering Information Revision 10 10 08/07/18 Updates to T&R, Package Dimensions, Added Marking Info Date 07 Aug 2018 Specifications subject to change without notification. See Connor-Winfield's website for latest revision. © Copyright 2018 The Connor-Winfield Corporation Not intended for life support applications.