Dipped Radial Capacitors Wire Form Outline SOLID TANTALUM RESIN DIPPED TAP/TEP Preferred Wire Forms D D D Figure 1 Figure 2 Figure 3 2.0(0.08) H H1 + 4 (0.16) max H1 max + + L L S L S S d d 2.0 (0.079) 2 (0.079) d min min Wire Form C Wire Form B Wire Form S Non-Preferred Wire Forms (Not recommended for new designs) Figure 4 D Figure 5 Figure 6 D D H + 3.8 (0.15) H1 max H max +0.118 + (3.0) 0.079 (2) L 1.10 +0.25 min L -0.10 L (0.4 +0.010) S S -0.004 S d d Wire Form F Wire Form D Wire Form G DIMENSIONS millimeters (inches) Packaging Wire Form Figure Case Size L (see note 1) S d Suffixes Available* Preferred Wire Forms CCS Bulk 16.0±4.00 5.00±1.00 0.50±0.05 C Figure 1 A - R* CRW Tape/Reel (0.630±0.160) (0.200±0.040) (0.020±0.002) CRS Tape/Ammo 16.0±4.00 5.00±1.00 0.50±0.05 BRW Tape/Reel B Figure 2 A - J* (0.630±0.160) (0.200±0.040) (0.020±0.002) BRS Tape/Ammo SCS Bulk 16.0±4.00 2.50±0.50 0.50±0.05 S Figure 3 A - J* SRW Tape/Reel (0.630±0.160) (0.100±0.020) (0.020±0.002) SRS Tape/Ammo Non-Preferred Wire Forms(Not recommended for new designs) 3.90±0.75 5.00±0.50 0.50±0.05 F Figure 4 A - R FCS Bulk (0.155±0.030) (0.200±0.020) (0.020±0.002) 16.0±4.00 2.50±0.75 0.50±0.05 DCS Bulk D Figure 5 A - H* (0.630±0.160) (0.100±0.020) (0.020±0.002) DTW Tape/Reel DTS Tape/Ammo 16.0±4.00 3.18±0.50 0.50±0.05 G Figure 6 A - J GSB Bulk (0.630±0.160) (0.125±0.020) (0.020±0.002) Similar to 16.0±4.00 6.35±1.00 0.50±0.05 H A - R HSB Bulk Figure 1 (0.630±0.160) (0.250±0.040) (0.020±0.002) Notes: (1) Lead lengths can be supplied to tolerances other than those above and should be specified in the ordering information. (2) For D, H, and H dimensions, refer to individual product on following pages. 1 * For case size availability in tape and reel, please refer to pages 199-200. 119922

Dipped Radial Capacitors TAP Series SOLID TANTALUM RESIN DIPPED CAPACITORS TAP is a professional grade device manufactured with a flame retardant coating and featuring low leakage current and impedance, very small physical sizes and exceptional temperature stability. It is designed and conditioned to LEAD-FREE COMPATIBLE operate to +125°C (see page 228 for voltage COMPONENT derating above 85°C) and is available loose or taped and reeled for auto insertion. The 15 case sizes with wide capacitance and working voltage ranges means the TAP can accommodate almost any application. MAXIMUM CASE DIMENSIONS: millimeters (inches) Wire C, F, G, H B, S, D Case H *H D 1 A 8.50 (0.330) 7.00 (0.280) 4.50 (0.180) B 9.00 (0.350) 7.50 (0.300) 4.50 (0.180) C 10.0 (0.390) 8.50 (0.330) 5.00 (0.200) D D 10.5 (0.410) 9.00 (0.350) 5.00 (0.200) E 10.5 (0.410) 9.00 (0.350) 5.50 (0.220) + F 11.5 (0.450) 10.0 (0.390) 6.00 (0.240) G 11.5 (0.450) 10.0 (0.390) 6.50 (0.260) H 12.0 (0.470) 10.5 (0.410) 7.00 (0.280) J 13.0 (0.510) 11.5 (0.450) 8.00 (0.310) H K 14.0 (0.550) 12.5 (0.490) 8.50 (0.330) L 14.0 (0.550) 12.5 (0.490) 9.00 (0.350) M 14.5 (0.570) 13.0 (0.510) 9.00 (0.350) N 16.0 (0.630) 9.00 (0.350) P 17.0 (0.670) 10.0 (0.390) R 18.5 (0.730) 10.0 (0.390) HOW TO ORDER TAP 475 M 035 SCS Type Capacitance Code Capacitance Tolerance Rated DC Voltage Suffix indicating wire form pF code: 1st two digits K = ±10% and packaging represent significant figures, M = ±20% (see page 192) 3rd digit represents multiplier (For J = ±5% tolerance, (number of zeros to follow) please consult factory) 193

Dipped Radial Capacitors TAP Series TECHNICAL SPECIFICATIONS Technical Data: All technical data relate to an ambient temperature of +25°C Capacitance Range: 0.10 μF to 330 μF Capacitance Tolerance: ±20%; ±10% (±5% consult your AVX representative for details) Rated Voltage DC (V ) (cid:2) +85°C: 6.3 10 16 20 25 35 50 R Category Voltage (V ) (cid:2) +125°C: 4 6.3 10 13 16 23 33 C Surge Voltage (V ) (cid:2) +85°C: 8 13 20 26 33 46 65 S Surge Voltage (V ) (cid:2) +125°C: 5 9 12 16 21 28 40 S Temperature Range: -55°C to +125°C Environmental Classification: 55/125/56 (IEC 68-2) Dissipation Factor: (cid:3)0.04 for C 0.1-1.5μF R (cid:3)0.06 for C 2.2-6.8μF R (cid:3)0.08 for C 10-68μF R (cid:3)0.10 for C 100-330μF R Reliability: 1% per 1000 hrs. at 85°C with 0.1Ω/V series impedance, 60% confidence level. Qualification: CECC 30201 - 032 CAPACITANCE AND RATED VOLTAGE RANGE (LETTER DENOTES CASE SIZE) Capacitance Rated voltage DC (V ) R μF Code 6.3V 10V 16V 20V 25V 35V 50V 0.10 104 A A 0.15 154 A A 0.22 224 A A 0.33 334 A A 0.47 474 A A 0.68 684 A B 1.0 105 A A A C 1.5 155 A A A A D 2.2 225 A A A A B E 3.3 335 A A A B B C F 4.7 475 A A B C C E G 6.8 685 A B C D D F H 10 106 B C D E E F J 15 156 C D E F F H K 22 226 D E F H H K L 33 336 E F F J J M 47 476 F G J K M N 68 686 G H L N N 100 107 H K N N 150 157 K N N 220 227 M P R 330 337 P R Values outside this standard range may be available on request. AVX reserves the right to supply capacitors to a higher voltage rating, in the same case size, than that ordered. MARKING Polarity, capacitance, rated DC voltage, and an "A" (AVX logo) are laser marked on the capacitor body which is made of flame retardant gold epoxy resin with a limiting oxygen index in excess of 30 (ASTM-D-2863). + A • Polarity • Tolerance code: • Capacitance ±20% = Standard (no marking) 10μ • Voltage ±10% = “K” on reverse side of unit 16 • AVX logo ±5% = “J” on reverse side of unit 119944

Dipped Radial Capacitors TAP Series RATINGS AND PART NUMBER REFERENCE DCL DF ESR DCL DF ESR AVX Case Capacitance (μA) % Max. (Ω) AVX Case Capacitance (μA) % Max. (Ω) Part No. Size μF Max. Max. @ 100 kHz Part No. Size μF Max. Max. @ 100 kHz 6.3 volt @ 85°C (4 volt @ 125°C) 25 volt @ 85°C (16 volt @ 125°C) TAP 335(*)006 A 3.3 0.5 6 13.0 TAP 105(*)025 A 1.0 0.5 4 10.0 TAP 475(*)006 A 4.7 0.5 6 10.0 TAP 155(*)025 A 1.5 0.5 4 8.0 TAP 685(*)006 A 6.8 0.5 6 8.0 TAP 225(*)025 A 2.2 0.5 6 6.0 TAP 106(*)006 B 10 0.5 8 6.0 TAP 335(*)025 B 3.3 0.6 6 5.0 TAP 156(*)006 C 15 0.8 8 5.0 TAP 475(*)025 C 4.7 0.9 6 4.0 TAP 226(*)006 D 22 1.1 8 3.7 TAP 685(*)025 D 6.8 1.3 6 3.1 TAP 336(*)006 E 33 1.7 8 3.0 TAP 106(*)025 E 10 2.0 8 2.5 TAP 476(*)006 F 47 2.4 8 2.0 TAP 156(*)025 F 15 3.0 8 2.0 TAP 686(*)006 G 68 3.4 8 1.8 TAP 226(*)025 H 22 4.4 8 1.5 TAP 107(*)006 H 100 5.0 10 1.6 TAP 336(*)025 J 33 6.6 8 1.2 TAP 157(*)006 K 150 7.6 10 0.9 TAP 476(*)025 M 47 9.4 8 1.0 TAP 227(*)006 M 220 11.0 10 0.9 TAP 686(*)025 N 68 13.6 8 0.8 TAP 337(*)006 P 330 16.6 10 0.7 35 volt @ 85°C (23 volt @ 125°C) 10 volt @ 85°C (6.3 volt @ 125°C) TAP 104(*)035 A 0.1 0.5 4 26.0 TAP 225(*)010 A 2.2 0.5 6 13.0 TAP 154(*)035 A 0.15 0.5 4 21.0 TAP 335(*)010 A 3.3 0.5 6 10.0 TAP 224(*)035 A 0.22 0.5 4 17.0 TAP 475(*)010 A 4.7 0.5 6 8.0 TAP 334(*)035 A 0.33 0.5 4 15.0 TAP 685(*)010 B 6.8 0.5 6 6.0 TAP 474(*)035 A 0.47 0.5 4 13.0 TAP 106(*)010 C 10 0.8 8 5.0 TAP 684(*)035 A 0.68 0.5 4 10.0 TAP 156(*)010 D 15 1.2 8 3.7 TAP 105(*)035 A 1.0 0.5 4 8.0 TAP 226(*)010 E 22 1.7 8 2.7 TAP 155(*)035 A 1.5 0.5 4 6.0 TAP 336(*)010 F 33 2.6 8 2.1 TAP 225(*)035 B 2.2 0.6 6 5.0 TAP 476(*)010 G 47 3.7 8 1.7 TAP 335(*)035 C 3.3 0.9 6 4.0 TAP 686(*)010 H 68 5.4 8 1.3 TAP 475(*)035 E 4.7 1.3 6 3.0 TAP 107(*)010 K 100 8.0 10 1.0 TAP 685(*)035 F 6.8 1.9 6 2.5 TAP 157(*)010 N 150 12.0 10 0.8 TAP 106(*)035 F 10 2.8 8 2.0 TAP 227(*)010 P 220 17.6 10 0.6 TAP 156(*)035 H 15 4.2 8 1.6 TAP 337(*)010 R 330 20.0 10 0.5 TAP 226(*)035 K 22 6.1 8 1.3 16 volt @ 85°C (10 volt @ 125°C) TAP 336(*)035 M 33 9.2 8 1.0 TAP 155(*)016 A 1.5 0.5 4 10.0 TAP 476(*)035 N 47 10.0 8 0.8 TAP 225(*)016 A 2.2 0.5 6 8.0 50 volt @ 85°C (33 volt @ 125°C) TAP 335(*)016 A 3.3 0.5 6 6.0 TAP 104(*)050 A 0.1 0.5 4 26.0 TAP 475(*)016 B 4.7 0.6 6 5.0 TAP 154(*)050 A 0.15 0.5 4 21.0 TAP 685(*)016 C 6.8 0.8 6 4.0 TAP 224(*)050 A 0.22 0.5 4 17.0 TAP 106(*)016 D 10 1.2 8 3.2 TAP 334(*)050 A 0.33 0.5 4 15.0 TAP 156(*)016 E 15 1.9 8 2.5 TAP 474(*)050 A 0.47 0.5 4 13.0 TAP 226(*)016 F 22 2.8 8 2.0 TAP 684(*)050 B 0.68 0.5 4 10.0 TAP 336(*)016 F 33 4.2 8 1.6 TAP 105(*)050 C 1.0 0.5 4 8.0 TAP 476(*)016 J 47 6.0 8 1.3 TAP 155(*)050 D 1.5 0.6 4 6.0 TAP 686(*)016 L 68 8.7 8 1.0 TAP 225(*)050 E 2.2 0.8 6 3.5 TAP 107(*)016 N 100 12.8 10 0.8 TAP 335(*)050 F 3.3 1.3 6 3.0 TAP 157(*)016 N 150 19.2 10 0.6 TAP 475(*)050 G 4.7 1.8 6 2.5 TAP 227(*)016 R 220 20.0 10 0.5 TAP 685(*)050 H 6.8 2.7 6 2.0 20 volt @ 85°C (13 volt @ 125°C) TAP 106(*)050 J 10 4.0 8 1.6 TAP 105(*)020 A 1.0 0.5 4 10.0 TAP 156(*)050 K 15 6.0 8 1.2 TAP 155(*)020 A 1.5 0.5 4 9.0 TAP 226(*)050 L 22 8.8 8 1.0 TAP 225(*)020 A 2.2 0.5 6 7.0 TAP 335(*)020 B 3.3 0.5 6 5.5 (*) Insert capacitance tolerance code; M for ±20%, K for ±10% and J for ±5% TAP 475(*)020 C 4.7 0.7 6 4.5 NOTE: Voltage ratings are minimum values. AVX reserves the right to supply high- TAP 685(*)020 D 6.8 1.0 6 3.6 er voltage ratings in the same case size. TAP 106(*)020 E 10 1.6 8 2.9 TAP 156(*)020 F 15 2.4 8 2.3 TAP 226(*)020 H 22 3.5 8 1.8 TAP 336(*)020 J 33 5.2 8 1.4 TAP 476(*)020 K 47 7.5 8 1.2 TAP 686(*)020 N 68 10.8 8 0.9 TAP 107(*)020 N 100 16.0 10 0.6 195