General Purpose High Power PCB Relays Potter & Brumfield T90 Series, 30A PCB Relay n 30A, 1 form A (NO); 20A, 1 form C (CO) n Available as open frame or sealed construction n Meets UL 508 and 873 Spacing - 3.18 through air, 6.36 over surface n UL class F insulation system standard Typical applications HVAC, Appliances, Industrial Controls. Approvals Coil Data UL E22575; CSA LR15734 Coil voltage range 5 to 110VDC Technical data of approved types on request. Max. coil power 1.0W Max. coil temperature 155°C Contact Data Coil insulation system according UL Class F Contact arrangement 1 form A (NO), 1 form B (NC), 1 form C (CO) Rated voltage 277VAC Coil versions, DC coil Max. switching voltage 277VAC Coil Rated Operate Release Coil Rated coil Rated current 30A code voltage voltage voltage resistance power Limiting continuous current 30A VDC VDC VDC Ω±10% wW Limiting making current 30A 5 5 3.75 0.5 27 900 Limiting breaking current 30A 6 6 4.5 0.6 40 900 Contact material AgCdO 9 9 6.75 0.9 97 900 Min. recommended contact load 1A, 5VDC or 12VAC 12 12 9 1.2 155 900 Initial contact resistance 75 mΩ at 1A at 5VDC or 12VAC 18 18 13.5 1.8 380 900 Frequency of operation, with load 360hr 24 24 18 2.4 660 900 Operate/release time max., including bounce 15/15ms 48 48 36 4.8 2560 900 110 110 82.5 11 13450 900 Contact ratings All figures are given for coil without preenergization, at ambient temperature +23°C. Type Load Cycles Ambient temperature vs. coil voltage – 1W coil Typical A NNgOOC dO, open sty32le00 AAre,, l22ay44 00VVAACC,, greesnisetrivael phueraptoesr e 110000xx110033 bient (°C)111321000 Open Style Relay, No Dust Cover CO 20A/10A, 240VAC, general purpose 100x103 Am100 e 90 CO 20A/10A, 28VDC, resistive 100x103 bov 80 UL 508/873 e A 70 AgCdO Ris 60 30A Load NO 30A, 240VAC, general purpose 100x103 mp. 50 25A Load NCNCOO 122500AAA,/, 122044A00,VV 2AA4CC0,,V grAeeCsnis,e tgrivaeel n peurarpl opsuerp ose 111000000xxx111000333 Coil Te 432000 2110050AAAA L oLLLoooadaaaddd 50 75 100 125 150 175 200 225 NC 15A, 240VAC, resistive 100x103 Applied Continuous Coil Voltage (% of Rated Voltage) CO 20A/10A, 240VAC, resistive 100x103 150 NO 80LRA/30FLA, 240VAC 30x103 C)140 Wash Tight Relay, Vented NC 30LRA/10FLA, 240VAC 30x103 ent (°113200 CO 53.6LRA/20FLA / 20LRA/6.7FLA, 240VAC 100x103 bi m110 NNOO 928HLPR, 2A4/202VFALCA , 120VAC 1001xx110033 bove A10900 NC 1/2HP, 240VAC 1x103 e A 80 NO 1HP, 120VAC 1x103 Ris 70 30A Load NNNCOC 163/AA4,,H 22P77,77 1VV2AA0CCV,,A bbCaa llllaasstt 10106xxx111000333 Coil Temp. 65430000 12210505AAAA LLLLooooaaaadddd NO TV5, 240VAC, tungsten 6x103 0A Load 20 NC TV3, 240VAC, tungsten 6x103 50 75 100 125 150 175 200 225 Applied Continuous Coil Voltage (% of Rated Voltage) NO 20A, 28VDC, resistive 100x103 Data graphed above are average values and should be verified in application. Tests were NC 10A, 28VDC, resistive 100x103 conducted within a 2’ (.6m) cube (still air); at nominal coil power @ 25°C; with normally All ratings at 25°C (unless otherwise noted) with relay properly vented. Remove vent nib open contact loaded; and with 4’ (1.22m) long, #10AWG load wires. P.C. board relays were from enclosed relays after soldering and cleaning for optimum life. mounted to a 30A, single side P.C. board. Coil rise test conducted with a 30A PC board to maintain 20°C max. rise at 30°C. The relay connections and wiring must be designed Mechanical endurance 10x106 ops. with an adequate cross section to ensure proper current flow and heat dissipation. After cleaning process knock-off nib should be removed for optimum life of wash-tight relays. 1 02-2014, Rev. 0214 Catalog and product specification according Catalog and product data is subject to the Catalog product data, ‘Definitions’ section, www.te.com to IEC 61810-1 and to be used only together terms of the disclaimer and all chapters of application notes and all specifications are © 2014 Tyco Electronics Corporation, with the ‘Definitions’ section. the ‘Definitions’ section, available at subject to change. a TE Connectivity Ltd. company. http://relays.te.com/definitions

General Purpose High Power PCB Relays Potter & Brumfield T90 Series, 30A PCB Relay (Continued) Insulation Data Other Data (continued) Initial dielectric strength Vibration resistance (functional) 1.65mm max excursions, 10-55 Hz between open contacts 1500V Shock resistance (functional) 10g for 11msec rms between contact and coil 1500V Shock resistance (destructive) 100g rms Initial insulation resistance Terminal type PCB-tht between insulated elements 1x109Ω Weight 20g open relay Clearance/creepage 26g wash-tight relay between contact and coil 3.17mm Resistance to soldering heat THT IEC 60068-2-20 250°C Other Data Packaging/unit tray/50 pcs., box/500 pcs. Material compliance: EU RoHS/ELV, China RoHS, REACH, Halogen content 1) Operating ambient temperature must consider “Must Operate Voltage Change Over refer to the Product Compliance Support Center at Temperature,” Contact Temperature Rise, Coil Temperature Rise (If coil is not allowed to cool) and Maximum Coil Temperature. Specification ambient considers 20A load with www.te.com/customersupport/rohssupportcenter coil cooled to ambient. Ambient temperature DC coil -55ºC to 85ºC 1) Category of environmental protection IEC 61810 RT0 - open, RTIII - wash tight Dimensions T90N T90S .031 x .062 .130 + .016 .680 MAX. (.79 x 1.58) .805 MAX. – .010 .212 MAX. .950 MAX. (17.27) TERMINALS (20.4) (3.30 + .41) (5.38) (24.13) .130 .020 –.25 .032 x .062 (3.3 .51) (.8 x 1.6) TERMINALS .50 .10 MAX. 1.20 MAX. .69 (12.8) (2.54) (30.5) (17.6) 1.27 MAX. (32.26) .025 x .025 2x(.64 x .64) T.0(E.26R54M xxIN ..06A24L5)S (T.10E.41R54M xxIN .10A.41L54S) 1.(0287 .M43A)X. .(0.4136) TERMINALS2x(.10.4154 xx .10.4154) TERMINALS Terminal assignment PCB layout Bottom view on pins Bottom view on pins 1 form A 1 form B 1 form C .081 ± .005 DIA. (2.06 ± .13) .078 ± .003 DIA. .300 .100 (1.98 ± .08) Only necessary terminals are (7.62) (2.54) present on single throw models and terminal code 4 models. Consequently, some holes will be .600 .600 unnecessary for those models. (15.24) (15.24) .043 ± .003 DIA. (1.09 ± .08) .150 .350 Note: This terminal is not present on relays with terminal code 4. (3.81) (8.89).550 (13.97) .700 (17.78) Accessory Optional plastic dust cover is a snap-on unit, open on the PC board side of 35C620A the relay. The cover, when ordered with the relay, is shipped separately. It is designed to be snapped into place by the customer after the relay has been .719 1.067 MAX. assembled to the PC board. (18.26) (27.1) .50 Product Code Description Part Number .69 (12.7) (17.5) 35C620A Black dust cover, for use on T90N relay 4-1393209-2 1.256 MAX. (31.9) .090 (2.29) .87 (22.1) 2 02-2014, Rev. 0214 Catalog and product specification according Catalog and product data is subject to the Catalog product data, ‘Definitions’ section, www.te.com to IEC 61810-1 and to be used only together terms of the disclaimer and all chapters of application notes and all specifications are © 2014 Tyco Electronics Corporation, with the ‘Definitions’ section. the ‘Definitions’ section, available at subject to change. a TE Connectivity Ltd. company. http://relays.te.com/definitions

General Purpose High Power PCB Relays PPootttteerr && BBrruummfifieelldd T90 Series, 30A PCB Relay (Continued) Product code structure Typical product code T90 S 5 D 1 2 -24 Type T90 Power PCB relay T90 Enclosure N Open, no enclosure (snap-on dust cover available as an option) S Wash-tight, sealed plastic case with knock off nib for ventilation Contact arrangement 1 1 form A (1 NO) 2 1 form B (1 NC) 5 1 form C (1 CO) Coil Input D DC voltage Mounting and termination 1 PCB terminals 4 PCB terminals, no common terminal between coil terminals (see PCB layout/terminal assignment drawing) Note: Terminal code 4 recommended for UL 873 applications. Consult factory for use of terminal code 1 for UL 873 applications. Contact material 2 AgCdO Coil voltage Coil code: please refer to coil versions table Product Code Enclosure Contacts Terminals Contact Material Coil Part Number  T90N1D12-5 open, no cover 1 form A, 1 NO PCB AgCdO 5 VDC 7-1393208-4   T90N1D12-9 9 VDC 7-1393208-5   T90N1D12-12 12 VDC 6-1393208-5   T90N1D12-18 18 VDC 6-1393208-8   T90N1D12-24 24 VDC 7-1393208-0   T90N1D12-48 48 VDC 7-1393208-3   T90N1D12-110 110 VDC 6-1393208-4   T90N1D42-12 PCB, no extra COM 12 VDC 7-1393208-7   T90N1D42-24 24 VDC 7-1393208-9   T90N5D12-5 1 form C, 1 CO PCB 5 VDC 9-1393208-5   T90N5D12-12 12 VDC 8-1393208-6   T90N5D12-18 18 VDC 9-1393208-0   T90N5D12-24 24 VDC 9-1393208-3   T90N5D12-48 48 VDC 9-1393208-4   T90N5D12-110 110 VDC 8-1393208-5   T90N5D42-12 PCB, no extra COM 12VDC 9-1393208-9   T90N5D42-24 24 VDC 1393209-2   T90S1D12-5 wash tight 1 form A, 1 NO PCB 5 VDC 1-1393209-8   T90S1D12-6 6 VDC 1-1393209-9   T90S1D12-9 9 VDC 2-1393209-0   T90S1D12-12 12 VDC 1-1393209-2   T90S1D12-18 18 VDC 1-1393209-3   T90S1D12-24 24 VDC 1-1393209-6   T90S1D42-12 PCB, no extra COM 12 VDC 2-1393209-2   T90S1D42-24 24 VDC 2-1393209-5   T90S1D42-48 48 VDC 2-1393209-6   T90S5D12-5 1 form C, 1 CO PCB 5 VDC 3-1393209-4   T90S5D12-12 12 VDC 2-1393209-8   T90S5D12-18 18 VDC 3-1393209-0   T90S5D12-24 24 VDC 3-1393209-1   T90S5D12-48 48 VDC 3-1393209-3   T90S5D42-12 PCB, no extra COM 12 VDC 1423094-1   T90S5D42-18 18 VDC 3-1393209-8   T90S5D42-24 24 VDC 4-1393209-0  3 02-2014, Rev. 0214 Catalog and product specification according Catalog and product data is subject to the Catalog product data, ‘Definitions’ section, www.te.com to IEC 61810-1 and to be used only together terms of the disclaimer and all chapters of application notes and all specifications are © 2014 Tyco Electronics Corporation, with the ‘Definitions’ section. the ‘Definitions’ section, available at subject to change. a TE Connectivity Ltd. company. http://relays.te.com/definitions