Available at Digi-Key** www.digikey.com Telecom Performance 5x7mm TCXO / VCTCXO T / TV Series Description: Features: 2111 Comprehensive Drive Connor-Winfield's Txxx • Frequency Stabilities Available: Aurora, Illinois 60505 +/-0.28 ppm (6.4 to 50 MHz) and TVxxx series are PFhaoxn:e 6: 3603-08-5815-15-0447202 5VxC7TmCmXO T CprXoOd uacntds with T1V05.004M1H4Z07 • T em++//p--e01r..a50t00u pprepp Rmma (on6rg. 4+e /st-o 2A 5.v00a0 iM lpapHbmlze): ( 6.4 to 54 MHz) www.conwin.com exceptional frequency 0 to 85°C, 0 to 70°C, -40 to 85°C or stability and low phase -20 to 70°C Packages Available: noise. Through the use • T - Series: 5 x 7mm - 10 Pad of analog temperature • TV - Series: 5 x 7mm - 4 Pad compensation, these products are capable • 3.3 Vdc Operation of holding Stratum 3 level temperature • Output Logic: LVCMOS or Clipped Sinewave stabilities of ±0.28 ppm over the commercial • Fixed Frequency - TCXO and industrial temperature ranges. Available • Voltage Controlled - VCTCXO in 4-pad or 10-pad surface mount footprints. • Low Jitter <0.50 ps RMS These products are designed for • Low Phase Noise such applications as IEEE 1588 PTP and • Tri-State Enable/Disable: (T Model Series Only) Synchronous Ethernet. • Tape and Reel Packaging • RoHS Compliant / Lead Free All models will meet ±4.6 ppm accuracies for twenty years Applications: • IEEE 1588 Applications • Synchronous Ethernet slave clocks, ITU-T G.8262 EEC options 1 & 2 • Compliant to Stratum 3, GR-1244-CORE & GR-253-CORE • Wireless Communications • Small Cells • Test and Measurement • GPS Standard Frequencies Available * * 6.4, 9.72, 10, 10.24, 12.5, 12.8, 13.5, 19.2, 19.44, 20, 20.48, 25, 27, 38.88, 40 MHz Available frequencies from the factory for small quantity orders or quick delivery. Additional frequencies are available. ** Not all Models available at Ordering Information Digi-Key TV 5 0 4 - 010.0M Frequency Type / Package Temperature Stability Features Output Frequency TCXO / VCTCXO Range Series 2 = TCXO, LVCMOS, 3.3 Vdc Frequency Format 0 = ±0.28 ppm -xxx.xM Min 3 = 0 to 85 °C 3 = TCXO, Clipped Sinewave, 3.3 Vdc T = 5.0x7.0 mm 1 = ±0.50 ppm -xxx.xxxxxxM Max 10 Pads 5 = 0 to 70°C 2 = ±1.00 ppm 4 = VCTCXO, LVCMOS, 3.3 Vdc *Amount of numbers after TV = 5.0x7.0 mm 6 = -40 to 85°C 5 = VCTCXO, Clipped Sinewave, 3.3 Vdc the decimal point. 4 Pads 7 = -20 to 70°C 3 = ±2.00 ppm M = MHz Example: Part Number TV504-010.0M = 5x7mm 4 pad package, ±0.28 ppm, 0 to 70°C, 3.3 Vdc, LVCMOS Output, VCTCXO Bulletin Tx176 T715-012.8M = 5x7mm 10 pad package, ±0.50 ppm, -20 to 70°C, 3.3 Vdc, Clipped Sinewave Output, VCTCXO T522-050.0M = 5x7mm 10 pad package, ±1.0 ppm, 0 to 70°C, 3.3 Vdc, LVCMOS Output, TCXO Page 1 of 6 TV602-010.0M = 5x7mm 4 pad package, ±0.28 ppm, -40 to 85°C, 3.3 Vdc, LVCMOS Output, TCXO Revision 22 Date 02 Aug 2018

2111 Comprehensive Drive Aurora, Illinois 60505 Phone: 630-851-4722 Fax: 630-851-5040 www.conwin.com Absolute Maximum Ratings Parameter Minimum Nominal Maximum Units Notes Storage Temperature -55 - 95 °C Supply Voltage (Vcc) -0.5 - 6.0 Vdc Input Voltage -0.5 - Vcc + 0.5 Vdc Operating Specifications Parameter Minimum Nominal Maximum Units Notes Output Frequency (Fo) Models Tx0x, TVx0x 6.4 - 50 MHz Models Tx1x, TVx1x 6.4 - 50 MHz Models Tx2x, TVx2x 6.4 - 54 MHz Models Tx3x, TVx3x 6.4 - 54 MHz Operating Temperature Range (See Ordering Information for full part number) Models T3xx, TV3xx 0 - 85 °C Models T5xx, TV5xx 0 - 70 °C Models T6xx, TV6xx -40 - 85 °C Models T7xx, TV7xx -20 - 70 °C Frequency Calibration @ 25 °C -1.0 - 1.0 ppm 1 Frequency Stability (See Ordering Information for full part number) Per STRATUM 3 GR-1244-CORE Frequency Stability ±0.28 ppm is only available in the frequency range of 6.4 to 50 MHz. Models Tx0x, TVx0x -0.28 - 0.28 ppm 2 Holdover Stability -0.32 - 0.32 ppm 3 Constant Temperature Stability -40 - 40 ppb Over 24 Hrs. Frequency Stability (See Ordering Information for full part number) Models Tx1x, TVx1x -0.50 - 0.50 ppm 2 Models Tx2x, TVx2x -1.00 - 1.00 ppm 2 Models Tx3x, TVx3x -2.00 - 2.00 ppm 2 Frequency vs. Load Stability -0.05 - 0.05 ppm ±5% Frequency vs. Voltage Stability -0.05 - 0.05 ppm ±5% Static Temperature Hysteresis - - 0.40 ppm 4 Freq. shift after reflow soldering -1.0 - 1.0 ppm 5 Long Term Stability -1.0 - 1.0 ppm 6 Aging per Life (20 Years) -3.0 - 3.0 ppm per Day -40 - 40 ppb Total Frequency Tolerance -4.6 - 4.6 ppm 7 Supply Voltage (Vcc) 3.135 3.30 3.465 Vdc Supply Current (Icc) LVCMOS - 2.1 6.0 mA Clipped Sinewave - 1.3 2.9 mA Jitter: Period Jitter - 3.0 5.0 ps RMS Integrated Phase Jitter (12K to Fo/2) - 0.3 1.0 ps RMS 8 Allan Deviation (1s) - 1.0E-10 - Typical SSB Phase Noise For Fo 10.0 MHz 25.0 MHz 50.0 MHz @ 10 Hz offset -98 -90 -73 dBc/Hz @ 100 Hz offset -125 -120 -103 dBc/Hz @ 1 KHz offset -143 -140 -134 dBc/Hz @ 10 KHz offset -151 -151 -151 dBc/Hz @ 100 KHz offset -152 -152 -152 dBc/Hz @ 1 MHz offset -155 -154 -154 dBc/Hz Start-Up Time - - 10 ms Bulletin Tx176 Page 2 of 6 Revision 22 Date 02 Aug 2018 Specifications subject to change without notification. See Connor-Winfield's website for latest revision. © Copyright 2017 The Connor-Winfield Corporation Not intended for life support applications.

2111 Comprehensive Drive Aurora, Illinois 60505 Phone: 630-851-4722 Fax: 630-851-5040 www.conwin.com Control Voltage Input Characteristics Parameter Minimum Nominal Maximum Units Notes Control Voltage 0.3 1.65 3.0 V Frequency Pullability ±10 ±12 - ppm Pull Slope (Vc=1.65V) - 8.00 - ppm/V Control Voltage Slope Positive Slope Monotonic Linearity - - 5 % Input Impedance 100K - - Ohm Modulation Bandwidth (3dB) 10 - - KHz OE Enable /Disable Input Characteristics (Pad 8) T Series only Parameter Minimum Nominal Maximum Units Notes Enable Input Voltage -(Vih) 70%Vcc - - Vdc 9 Disable Input Voltage - (Vil) - - 30%Vcc Vdc 9 Function Output Low: Disabled (High Impedance) High or Open: Enabled LVCMOS Output Characteristics Parameter Minimum Nominal Maximum Units Notes Load (CL) - 15 - pF 10 Voltage (High) (Voh) 90%Vcc - - Vdc (Low) (Vol) - - 10%Vcc Vdc Current (High) (Ioh) -4 - - mA (Low) (Iol) - - 4 mA Duty Cycle at 50% of Vcc 45 50 55 % Rise / Fall Time 10% to 90% - 4 8 ns Clipped Sinewave Output Characteristics Parameter Minimum Nominal Maximum Units Notes Load (RC) 11 Output Load Resistance - 10K - Ohm 12 Output Load Capacitance - 10 - pF Output Voltage (< 40 MHz) 1.0 1.2 - V pk-pk Output Voltage (=>40 MHz) 0.8 1.0 - V pk-pk Output Impedance - 200 - Ohms Package Characteristics Package Hermetically sealed ceramic package with grounded metal cover Environmental Characteristics Vibration: Vibration per Mil Std 883E Method 2007.3 Test Condition A. Shock: Mechanical Shock per Mil Std 883E Method 2002.4 Test Condition B. Soldering Process: RoHS compliant lead free. See soldering profile on page 6. Notes: 1. Initial calibration @ 25°C. ±2°C, for VCTCXO's Vc = 1.65V. Specifications at time of shipment 2. Frequency stability vs. change in temperature. [±(Fmax-Fmin)/(2*Fo]). For VCTCXO's - Vc -= 1.65V 3. Inclusive of frequency stability, supply voltage change (±1%), aging, for 24 hours. Per STRATUM 3 GR-1244-CORE. 4. Frequency change after reciprocal temperature ramped over the operating range. Frequency measured before and after at 25°C 5. Two consecutive solder reflows after 1 hour recovery @ 25°C. 6. Frequency drift over 1 year @ 25°C. 7. Inclusive of calibration @ 25°C, frequency vs. change in temperature, change in supply voltage (±5%), load change (±5%), reflow soldering process and 20 years aging. 8. BW = 12 KHz to 20 MHz 9. Leave Pad 8 on the T Series unconnected if enable / disable function is not required. When tri-stated, the output stage is disabled but the oscillator and compensation circuit are still active (current consumption < 1 mA). 10. Attention: To achieve optimal frequency stability, and in some cases to meet the specification stated on this data sheet, it is required that the Bulletin Tx176 circuit connected to this TCXO output must have the equivalent input capacitance that is specified by the nominal load capacitance. Deviations Page 3 of 6 from the nominal load capacitance will have a graduated effect on the stability of approximately 20 ppb per pF load difference. Revision 22 11. Load components are required for proper operation of the device. 12. Output is AC coupled. Date 02 Aug 2018 Specifications subject to change without notification. See Connor-Winfield's website for latest revision. © Copyright 2017 The Connor-Winfield Corporation Not intended for life support applications.

2111 Comprehensive Drive Aurora, Illinois 60505 Phone: 630-851-4722 Fax: 630-851-5040 www.conwin.com T Series T Series T Series Package Outline Suggested Pad Layout Pad Connections 0.095Max. 0.2(77.60m±0m.0)06 (2.4mm) (70.4.299m5m) 0.051 12:: DDoo NNoott CCoonnnneecctt 0.030 (1.28mm) (0.76mm) 3: Do Not Connect 0.197 KeepOutArea ±0.006 8 7 6 4: Ground (5.0mm) 0.037 9 5 5: Output (0.94mm) TopView 0.215 6: Do Not Connect (5.46mm) 10 4 Pin1 0.0(02.56(365Pmlamc)es) 0.040 1 2 3 (10.2.085m1m) 78:: DEnoa Nbolet /C Doinsnabeclet (OE) 1 2 3 (1.02mm) 10 4 (6Places) * Do not route any traces in the keep out area. 9: Supply Voltage (Vcc ((04.07P.60la23cm0ems)) BVoitetowm (20.5.140m0m) Ikte ies pre ocuotm amreean isd etod bthee g nroexutn lda ypelar nuen.der the 1 0 : TVCCXTOCX: ON:/ CControl Voltage (Vc) 9 5 8 7 6 DimensionalTolerance: (0.09.6053m8m) 0.100 ±.005(.127mm) (4Places) (2.54mm) ±.02 (.508mm) TV Series TV Series TV Series Package Outline Suggested Pad Layout Pad Connections 0.276±0.006 0.095Max. 0.071 1: VCTCXO: Voltage Control (Vc) (7.0mm) (2.4mm) (1.8mm) 4Places TCXO: N/C 4 3 2: Ground 3: Output 0.197 ±0.006 4: Supply (Vcc) (5.0mm) 0.165 0.047 (4.2mm) (TopView) (1.2mm) 4Places Pad1 (TopView) Keep Out * 1 2 1 0.224 2 Area DimensionalTolerance: (5.7mm) ±.005(.127mm) 0.034 (BottomView) ±.02 (.508mm) (0.90mm) * Do not route any traces in the keep out area. (4Places) 4 3 It is recommended the next layer under the 0.055 keep out area is to be ground plane. (1.40mm) (4Places) Marking Information The following are examples of possible marking configurations The marking varies with design configuration. All marking configurations below are valid. 2 CHARACTER DATE CODE Y = Year M = Month 8 = 2018 A = January 9 = 2019 B = February 0 = 2020 C = March 1 = 2021 D = April E = May F = June G = July H = August J = September K = October M = November N = December Bulletin Tx176 Page 4 of 6 Revision 22 Date 02 Aug 2018 Specifications subject to change without notification. See Connor-Winfield's website for latest revision. © Copyright 2017 The Connor-Winfield Corporation Not intended for life support applications.

2111 Comprehensive Drive Aurora, Illinois 60505 Phone: 630-851-4722 Fax: 630-851-5040 www.conwin.com T Series Design Recommendations TV Series Design Recommendations Vcc,shouldhave Vaccla,rsgheouclodphpaevre 0.010”(0.254mm) alargecopper areaforreduced Recommended Vcc 50Ohmtrace Cba<oyrferpni0onaan.dm1esfu”osc(ct2rchtt.reaaae5np4dp0cmaua.e0ccdm.1iet.uo)dFr 9 8 6 5 0R.e0i1cncfo0odler”mu(ai0ncmr.tta2eane5rnncn4caedmelemd) Vcc Bu5<f0f1e”Orbhymdetrsaigcne Cb<oyfrpni0onan.dm1esu”sc(ct2chtt.eaaa5np4p0cmaa.e0cdm.1it.uo)Fr 94 35 cioncfopdlerpuaincerttareafnrlnnoccaoeeld. Bu<ff1e”rbydesign copperflood. Ground 10 To1pView3 4 aslhaGorgureolducnhodap,vpeer Ground TopView Ground 110TopView 24 aslhaGorgureolducnhodap,vpeer TopView Ground areaforreduced areaforreduced inductance. inductance. 50OhmTrace OSC 50WOihthmouTtracOeutput OSC WVitihaosut OBuutfpfeurt Vias Buffer TOPLAYER TOPLAYER GROUNDLAYER GROUNDLAYER ....... BOTTOMLAYER ....... BOTTOMLAYER T Series TV Series LVCMOS Output Waveform LVCMOS Test Circuit LVCMOS Test Circuit Enable/ Disable DNCDNC Vcc Supply 4 3 Output Vcc 8 7 6 Voltage Supply 9 5 Output Voltage Ground 1 2 10 1 2 3 4 Ground 15pF 15pF 0By.1pausFs 1By0pnaFss VTCCTXCOXO==N/VCc 0.1uF 10nF Bypass Bypass TCXO=N/C DNC DNCDNC VCTCXO=Vc DNC=DoNotConnect 1V/Div T Series TV Series Clipped Sinewave Clipped Sinewave Test Circuit Clipped Sinewave Test Circuit Output Waveform Enable/ DisableDNCDNC Vcc 8 7 6 Vcc SVuopltapglye 9 5 Output SVuopltapglye 4 3 Output 10 1 2 3 4 Ground 1 2 Ground 0 10pF O1h0mK 10pF O1h0mK 0By.1pausFs 1By0pnaFss TCXO=N/C DNC DNCDNC 0By.1pausFs 1By0pnaFss VTCCTXCOXO==N/VCc VCTCXO=Vc DNC=DoNotConnect 200mV/Div Note: The clipped sinewave output is AC coupled Bulletin Tx176 Page 5 of 6 Revision 22 Date 02 Aug 2018 Specifications subject to change without notification. See Connor-Winfield's website for latest revision. © Copyright 2017 The Connor-Winfield Corporation Not intended for life support applications.

2111 Comprehensive Drive Aurora, Illinois 60505 Phone: 630-851-4722 Fax: 630-851-5040 www.conwin.com Phase Noise Information TIE ModelTV504-010.0MHz TV504-010.0M: WANDERGENERATIONINASTRATUM3PLLAT0.098HzBANDWIDTH MTIE TDEV TV504-010.0M: MTIEperGR-253-CORE TV504-010.0M: TDEV perGR-253-CORE 5x7mm Tape and Reel Information Solder Profile Temperature 260°C 260°C 220°C 180°C 1 150°C 120°C 0 10s Upto120s 60to90s Typical Typical MeetsIPC/JEDECJ-STD-020C Revision History Revision Date Action 17 02/11/14 Updated specifications and combined the T and TV series data sheets. 18 09/15/14 Added Alternate Package Outline 19 04/01/15 Updated Frequency Stabilities Bulletin Tx176 20 07/27/16 Extended operating frequency range, and updated standard frequency list 21 05/10/17 Added marking variations Page 6 of 6 22 08/02/18 Height change to 2.4mm Max and added additional marking variation Revision 22 Date 02 Aug 2018 Specifications subject to change without notification. See Connor-Winfield's website for latest revision. © Copyright 2017 The Connor-Winfield Corporation Not intended for life support applications.