KEMET Organic Capacitor (KO-CAP®) T52X/T530 Polymer Electrolytic Capacitors Overview The KEMET Organic Capacitor (KO-CAP) is a solid electrolytic capacitor with a conductive polymer cathode capable of delivering very low ESR and improved capacitance retention at high frequencies. KO-CAP combines the low ESR of multilayer ceramic, the high capacitance of aluminum electrolytic, and the volumetric efficiency of tantalum into a single surface mount package. Unlike liquid electrolyte-based capacitors, KO-CAP has a very long operational life and high ripple current capabilities. The T52X/T530 provides the widest range of voltages, capacitance and case size options in the KO-CAP family and is suitable for general purpose DC applications for up to 48 volt DC voltage rails. Benefits • ESR values down to 5 mΩ • Stable capacitance across temperature and voltage • No aging effects • High ripple handling • Volumetrically efficient • High frequency capacitance retention • 100% accelerated steady state aging • 100% surge current tested • Halogen-free epoxy and RoHS compliant Applications Typical applications include DC/DC converters, audio/sound circuits (mobile phone and base stations, smart phones, MP3 players), power supply inputs, portable electronics (notebook PCs, displays, SSDs, HDDs and USBs, digital cameras, GPS navigation systems, WiFi modules), telecommunications, consumer electronics (analytical and test equipment, high speed servers), high voltage applications such as 12 V to 48 V power input rails, densely populated circuits with space restrictions, microprocessor decoupling, and high ripple current applications. One world. One KEMET © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2076_T52X-530 • 3/20/2020 1 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

KEMET Organic Capacitor (KO-CAP®) T52x/T530 Polymer Electrolytic Capacitors Environmental Compliance • RoHS compliant (6/6) according to Directive 2002/95/EC when ordered with 100% Sn, Ni-Pd-Au or non-magnetic 100% Sn solder • Halogen-free • Epoxy compliant with UL94 V-0 K-SIM For a detailed analysis of specific part numbers, please visit ksim.kemet.com to access KEMET’s K-SIM software. KEMET K-SIM is designed to simulate behavior of components with respect to frequency, ambient temperature, and DC bias levels. Series Reference Selection Series Voltage Range Temperature Rating Special Features < 1 V to 9 V 12 V to 48 V 85°C Rated 105°C Rated 125°C Rated Miniature Size Low ESL Applications Applications T520 Standard X * X** X T521 High Voltage X X X Facedown T523 X X** X X** X Terminal T525 High Temperature X * X T527 Small Size X X X X T529 Miniature X X X X High Cap/ T530 X X X X Low ESR * Not recommended for new design. ** Selected values. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2076_T52X-530 • 3/20/2020 22 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

KEMET Organic Capacitor (KO-CAP®) T52x/T530 Polymer Electrolytic Capacitors Ordering Information T 520 V 157 M 006 A T E045 Rated Failure Capacitor Case Capacitance Code Capacitance Packaging Series Voltage Rate/ Termination Finish ESR Code Class Size1 (pF) Tolerance (C-Spec) (VDC) Design T = 520 = Polymer A First two digits K = ±10% 002 = 2 A = T = 100% Matte tin E = ESR Blank = 7" reel Tantalum 521 = High B represent M = ±20% 2R5 = 2.5 N/A (Sn)-plated last three 7280**** = 13" voltage C significant 003 = 3 H*** = Tin/lead digits reel 523 = Facedown D figures. Third 004 = 4 (SnPb) solder coated specify ESR terminal H digit specifies 006 = 6.3 (5% Pb minimum) in mΩ 525 = 125°C I number of 008 = 8 P* = Ni-Pd-Au-plated (045 = 45 rated J zeros. 010 = 10 N = Non-magnetic mΩ) 527 = Facedown L 011 = 11 100% Tin (Sn) terminal M 12R = 12.5 M = Non-magnetic 529 = Substrate P 016 = 16 (SnPb) terminal Q 020 = 20 A** = Ni-Au 530 = 125°C High S 025 = 25 capacitance T 035 = 35 U 050 = 50 V 063 = 63 W 075 = 75 X Y Gold termination available upon request * P termination only available on select part numbers ** A termination only available on T529 part numbers *** H termination not available for T527/T529 part numbers **** 13" reel not available for T520A case and some other part numbers Performance Characteristics Item Performance Characteristics Operating Temperature −55°C to 85°C/105°C/125°C (refer to part number for maximum temperature rating) Rated Capacitance Range 4.7 – 1,500 µF at 120 Hz/25°C Capacitance Tolerance K tolerance (10%), M tolerance (20%) Rated Voltage Range 2 – 75 V DF (120 Hz) Refer to Part Number Electrical Specification Table* ESR (100 kHz) Refer to Part Number Electrical Specification Table** Leakage Current Refer to Part Number Electrical Specification Table * For T529 Series DF measurement apply 1.5 V DC ** For PN T520B477M2R5ATE014 the ESR measurement should be taken at 300 to 500kHz © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2076_T52X-530 • 3/20/2020 33 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

KEMET Organic Capacitor (KO-CAP®) T52x/T530 Polymer Electrolytic Capacitors Qualification Test Condition Characteristics Within −20%/+10% of initial value Δ C/C T527 and T529: Within initial DC/C limits Within initial limits Temperature: 85°C, 105°C, 125°C*2 DF T527 and T529: Within 1.5 x initial limits*3 Voltage: 1.0 Rated Voltage 85°C and 105°C rated parts: Within 1.25 x initial limit Endurance 2/3 Rated Voltage for 125°C rating PN 125°C rated parts: Within 2.0 x initial limits Time: 2,000 Hours DCL T527: Within initial limits 1,000 Hours for T527/T529*3 T529: Within 3.0 x initial limits Within 2.0 x initial limit ESR (N/A for T527 and T529*3) Δ C/C Within −20%/+10% of initial value Temperature: 105°C, 125°C*2 DF Within initial limits Storage Life Voltage: 0 Voltage Within 1.25 x initial limit Time: 2,000 Hours DCL T521: 1.25 x IL at 105°C, 2x IL at 125°C (N/A for T527 and T529*3) T525/T530: Within 2.0 x initial limit ESR Within 2.0 x initial limit Within −5%/+35% of initial value Δ C/C T527/T529: −20% to +30% of initial DC/C limit T520B477M2R5ATE014: −20% to +50% of initial DC/C limit Temperature: 60°C Within initial limits DF Voltage: No Load T527/T529: Within 1.5 x initial limits*3 Humidity Humidity: 90% RH Within 5.0 x initial limit Time: 500 Hours, 1,000 Hours (T525, T530) DCL T521/T525/T529/T530: Within 3.0 x initial limit*3 T527: Within initial limits Within 2.0 x initial limit ESR T525/T527/T529/T530: N/A*3 +25°C −55°C +85°C +105º/125°C ±20% ±30% Δ −20% - 0% Extreme temperature exposure at C/C IL*1 of DC/C ±20% +50% - 0% of Temperature a succession of continuous steps (T527/29)*3 DC/C (T527/29)*3 Stability at +25°C, −55°C, +25°C, +85°C, +105°/125°C*2, +25°C DF IL IL 1.2 x IL 1.5 x IL IL (T529) N/A 10 x IL DCL IL 10 x IL IL (T529) 1.25 CV (T529) Within −20%/+10% of initial value Δ C/C T527/T529 Series: Within initial DC/C limits Temperature: 105°C, 85°C*2, *4, *5 DF Within initial limits Surge Voltage Voltage: 1.32 x Rated voltage*5 Time: 1,000 cycles DCL Within initial limits Within initial limits ESR T527/T529 Series: N/A*3 MIL–STD–202, Method 213, Condition I, Within ±10% of initial value Δ C/C 100 G Peak. Within initial DC/C limits Mechanical Shock/Vibration MIL–STD–202, Method 204, Condition D, DF Within initial limits 10 Hz to 2,000 Hz, 20 G peak DCL Within initial limits *1 IL = Initial limit *2 Please refer to part number specifications for individual temperature classification. *3 This condition/exclusion applies also to PN T520B477M2R5ATE014 and PN T520B337M2R5ATE009 *4 For Series T527 and T529 test temperature is 85°C *5 For T527 > 20 V test temperature is at +15 - +35°C, test voltage at 1.16 x V R © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2076_T52X-530 • 3/20/2020 44 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

KEMET Organic Capacitor (KO-CAP®) T52x/T530 Polymer Electrolytic Capacitors Reliability KO-CAP capacitors have an average failure rate of 0.5 %/1,000 hours at category voltage, U , and category temperature, C T . These capacitors are qualified using industry test standards at U and T . The minimum test time (1,000 hours or 2,000 C C C hours) is dependent on the product. The actual life expectancy of KO-CAP capacitors increases when application voltage, U , and application temperature, T , A A are lower than U and T . As a general guideline, when U < 0.9 * U and T < 85°C, the life expectancy will typically exceed C C A C A the useful lifetime of most hardware (> 10 years). The lifetime of a KO-CAP capacitor at a specific application voltage and temperature can be modeled using the equations below. A failure is defined as passing enough current to blow a 1-amp fuse. The calculation is an estimation based on empirical results and is not a guarantee. (U )n [E ( 1 1 )] VAF = C a U TAF = e k 273+T 273+T A A C where: where: TAF = acceleration factor due to temperature, unitless VAF = acceleration factor due to voltage, unitless E = activation energy, 1.4 eV U = category voltage, volt a C k = Boltzmann’s constant, 8.617E-5 eV/K U = application voltage, volt T = application temperature, °C A A n = exponent, 16 T = category temperature, °C C AF = VAF * TAF Life = Life * AF U ,T U ,T A A C C where: where: Life = guaranteed life application voltage UA, TA AF = acceleration factor, unitless and temperature, years TAF = accerlation factor due to temperature, unitless Life = guaranteed life category voltage UC, TC and temperature, years VAF = acceleration factor due to voltage, unitless AF = acceleration factor, unitless Terms: Category voltage, U : maximum recommended peak DC operating voltage for continuous operation at the category temperature, T C C Rated voltage, U : maximum recommended peak DC operating voltage for continuous operation up to the rated temperature, T R R Category temperature, T : maximum recommended operating temperature. Voltage derating may be required at T C C Rated temperature, T : maximum recommended operating temperature without voltage derating. T is equal to or lower than T R R C Reliability Table 1 – Common temperature range classifications 85°C (TR) / Rated Voltage (UR) 2.5 4.0 6.3 8.0 10.0 12.5 16.0 20.0 25.0 35.0 50.0 63.0 75.0 85°C (TC) Category Voltage (UC) 2.5 4.0 6.3 8.0 10.0 12.5 16.0 20.0 25.0 35.0 50.0 63.0 75.0 105°C (TR) / Rated Voltage (UR) 2.5 4.0 6.3 8.0 10.0 12.5 16.0 20.0 25.0 35.0 50.0 63.0 75.0 105°C (TC) Category Voltage (UC) 2.5 4.0 6.3 8.0 10.0 12.5 16.0 20.0 25.0 35.0 50.0 63.0 75.0 105°C (TR) / Rated Voltage (UR) 2.5 4.0 6.3 8.0 10.0 12.5 16.0 20.0 25.0 35.0 50.0 63.0 75.0 125°C (TC) Category Voltage (UC) 1.7 2.7 4.2 5.4 6.7 8.4 10.7 13.4 16.8 23.5 33.5 42.2 50.3 © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2076_T52X-530 • 3/20/2020 55 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

KEMET Organic Capacitor (KO-CAP®) T52x/T530 Polymer Electrolytic Capacitors Electrical Characteristics T520 Standard (2 V – 10 V) ESR vs. Frequency Capacitance vs. Frequency 100 1000 T520B157M006ATE035_Imp T520C227M006ATE025_Imp T520V337M006ATE015_Imp 10 T520D337M006ATE009_Imp hms) TT552200BC125277MM000066AATTEE002355__EESSRR uF)100 R (O 1 TT552200VD333377MM000066AATTEE001059__EESSRR ce ( S n ce,E cita pedan 0.1 Capa 10 m I T520B157M006ATE035 0.01 T520C227M006ATE025 T520V337M006ATE015 T520D337M006ATE009 0.001 1 100 1,000 10,000 100,000 1,000,000 10,000,000 100 1,000 10,000 100,000 1,000,000 10,000,000 Frequency (Hz) Frequency (Hz) T521 High Voltage (12 V – 75 V) ESR vs. Frequency Capacitance vs. Frequency 100 100 T521V476M020ATE055_Imp T521V336M025ATE060_Imp T521V156M035ATE100_Imp 10 s) T521V476M020ATE055_ESR Ohm T521V336M025ATE060_ESR µF)10 e, ESR ( 1 T521V156M035ATE100_ESR ance ( edanc pacit 1 p a Im 0.1 C T521V476M020ATE055 T521V336M025ATE060 T521V156M035ATE100 0.01 100 1,000 10,000 100,000 1,000,000 10,000,000 100 1,000 10,000 100,000 1,000,000 10,000,000 Frequency (H z) Frequency (Hz) T530 High Cap/Low ESR (2 V – 10 V) ESR vs. Frequency Capacitance vs. Frequency 10 1,000 T530D227M006ATE006_Imp T530Y337M006ATE005_Imp T530X477M006ATE004_Imp ms) 1 T530D227M006ATE006_ESR h ESR (O TT553300YX343777MM000066AATTEE000054__EESSRR e (μF) 100 ance, 0.1 citanc T530D227M006ATE006 Imped Capa10 TT553300YX343777MM000066AATTEE000054 0.01 0.001 1 100 1,000 10,000 100,000 1,000,000 10,000,000 100 1,000 10,000 100,000 1,000,000 10,000,000 Frequency (H z) Frequency (Hz) © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2076_T52X-530 • 3/20/2020 66 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

KEMET Organic Capacitor (KO-CAP®) T52x/T530 Polymer Electrolytic Capacitors Dimensions – Millimeters (Inches) Metric will govern T520 / T521 / T525 / T530 CATHODE (-) END VIEW SIDE VIEW ANODE (+) END VIEW BOTTOM VIEW A W B B Glue pad H shape/design at F KEMET's option P Termination cutout X T S S at KEeMitEhTer's e onpdtion, R L For T520 Series, bevel is at KEMET's option Case Component Dimensions Size S Typical F ±0.3 ±(0.012) B ±0.15 X P R T A KEMET EIA L W H Weight ±0.1 ±(0.004) S1 ±0.4 (0.0157) (Ref) ±0.006 (Ref) (Ref) (Ref) (Ref) (Min) S2 ±0.2 (0.00) (mg) 3216- 3.2 ±0.2 1.6 ±0.2 1.6 ±0.2 1.2 0.8 0.10 ±0.10 0.4 0.4 0.13 1.2 A N/A 53 18 (0.126 ±0.008) (0.063 ±0.008) (0.063 ±0.008) (0.047) (0.032) (0.004 ±0.004) (0.016) (0.016) (0.005) (0.047) 0.8 (0.032) 3528- 3.5 ±0.2 2.8 ±0.2 1.9 ±0.1*3 2.2 0.4 0.10 ±0.10 0.5 1.0 0.13 1.9 B S1 = 0.8 (0.032)*2 95 21 (0.138 ±0.008) (0.110 ±0.008) (0.075 ±0.008) (0.087) (0.016) (0.004 ±0.004) (0.020) (0.039) (0.005) (0.075) S2 = 0.8 (0.032)*2 6032- 6.0 ±0.3 3.2 ±0.2 2.5 ±0.3 2.2 1.30 0.5 0.10 ±0.10 0.9 1.0 0.13 2.9 C 184 28 (0.236 ±0.012) (0.126 ±0.008) (0.098 ±0.012) (0.087) (0.051) (0.020) (0.004 ±0.004) (0.035) (0.039) (0.005) (0.114) 7343- 7.3 ±0.3 4.3 ±0.3 2.8 ±0.3 2.4 1.30 0.5 0.10 ±0.10 0.9 1.0 0.13 3.6 D 435 31 (0.287 ±0.012) (0.169 ±0.012) (0.110 ±0.012) (0.094) (0.051) (0.020) (0.004 ±0.004) (0.035) (0.039) (0.005) (0.142) 7360- 7.3 ±0.3 6.0 ±0.3 1.9 ±0.1 4.1 1.3 0.10 ±0.10 0.13 3.3 H N/A N/A N/A 385 20 (0.287 ±0.012) (0.236 ±0.012) (0.075 ±0.004) (0.161) (0.051) (0.004 ±0.004) (0.005) (0.130) 7360- 7.3 ±0.3 6.0 ±0.3 1.5 (0.059) 4.1 1.3 0.10 ±0.10 3.3 J N/A N/A N/A N/A 263 15 (0.287 ±0.012) (0.236 ±0.012) Maximum (0.161) (0.051) (0.004 ±0.004) (0.130) 6032- 6.0 ±0.3 3.2 ±0.2 1.8 ±0.1 2.2 1.3 0.05 0.13 2.5 L N/A N/A N/A 187 19 (0.236 ±0.012) (0.110 ±0.008) (0.071 ±0.004) (0.087) (0.051) (0.002) (0.005) (0.098) 3528- 3.5 ±0.2 2.8 ±0.2 1.4 ±0.1 2.2 0.8 0.05 0.13 1.1 M N/A N/A N/A 98 15 (0.138 ±0.008) (0.110 ±0.008) (0.055 ±0.004) (0.087) (0.031) (0.002) (0.005) (0.043) 7343- 7.3 ±0.3 4.3 ±0.3 1.1 ±0.1 2.4 1.3 0.05 0.13 3.8 Q N/A N/A N/A 170 12 (0.287 ±0.012) (0.169 ±0.012) (0.043 ±0.004) (0.094) (0.051) (0.002) (0.005) (0.150) 3528- 3.5 ±0.2 2.8 ±0.2 1.1 ±0.1 2.2 0.8 0.05 0.13 1.9 T N/A N/A N/A 55 12 (0.138 ±0.008) (0.110 ±0.008) (0.043 ±0.004) (0.087) (0.032) (0.002) (0.005) (0.075) 6032- 6.0 ±0.3 3.2 ±0.2 1.4 ±0.1 2.2 1.3 0.05 0.13 2.9 U N/A N/A N/A 117 15 (0.236 ±0.012) (0.126 ±0.008) (0.055 ±0.004) (0.087) (0.051) (0.002) (0.005) (0.114) 7343- 7.3 ±0.3 4.3 ±0.3 1.8 ±0.1*1 2.4 1.3 0.05 0.13 3.6 V N/A N/A N/A 274 19 (0.287 ±0.012) (0.169 ±0.012) (0.071±0.004) (0.094) (0.051) (0.002) (0.005) (0.142) 2.4(0.094) 1.30 (0.051) 7343- 7.3 ±0.3 4.3 ±0.3 1.4 ±0.1 0.05 0.13 3.6 W 2.8 ±0.2 S1 = 5.0 (0.197)*2 N/A N/A N/A 223 15 (0.287 ±0.012) (0.169 ±0.012) (0.055 ±0.004) (0.002) (0.005) (0.142) (0.110 ±0.0079)*2 S2 = 1.3 (0.051)*2 7343- 7.3 ±0.3 4.3 ±0.3 4.0 ±0.3 2.4 1.3 0.5 0.10 ±0.10 1.7 1.0 0.13 3.6 X 554 43 (0.287 ±0.012) (0.169 ±0.012) (0.157 ±0.012) (0.094) (0.051) (0.020) (0.004 ±0.004) (0.067) (0.039) (0.005) (0.142) 7343- 7.3 ±0.3 4.3 ±0.3 3.8 ±0.2 2.4 1.3 0.5 0.10 ±0.10 1.7 1.0 0.13 3.8 Y 494 40 (0.287 ±0.012) (0.169 ±0.012) (0.150 ±0.008) (0.094) (0.051) (0.020) (0.004 ±0.004) (0.067) (0.039) (0.005) (0.150) *1 Height tolerance is ±0.2 for V case T521 only *2 S1 and S2 is for T528 series only *3 Height tolerance is ±0.2 for: T520B with M & N terminations © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2076_T52X-530 • 3/20/2020 77 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

KEMET Organic Capacitor (KO-CAP®) T52x/T530 Polymer Electrolytic Capacitors Dimensions – Millimeters cont. T523 END VIEW SIDE VIEW BOTTOM VIEW H F W L S S Typical F ±0.1 S ±0.3 KEMET EIA L W H Weight (±0.004) (±0.012) (mg) 7.3±0.3 4.3±0.3 1.4±0.1 2.4 1.3 W 7343-15 223 (0.287±0.012) (0.169±0.012) (0.055±0.004) (0.094) (0.051) 7.3±0.3 6.0±0.3 1.4±0.1 4.45 1.6 J 7360-15 263 (0.287±0.012) (0.236±0.012) (0.055±0.004) (0.175) (0.063) 7.3±0.3 4.3±0.3 1.9±0.1 2.4 1.3 V 7343-20 274 (0.287±0.012) (0.169±0.012) (0.075±0.004) (0.094) (0.051) 7.3±0.3 6.0±0.3 1.9±0.1 4.45 1.6 H 7360-20 385 (0.287±0.012) (0.236±0.012) (0.075±0.004) (0.175) (0.063) T527 END VIEW SIDE VIEW BOTTOM VIEW H F W L S S Case Size Component Dimensions Typical Weight KEMET EIA L W H F S (mg) I 3216-10 3.2 ±0.2 1.6 ±0.2 0.9 ±0.1 1.2 ±0.1 0.8 ±0.2 70 T 3528-12 3.5 ±0.2 2.8 ±0.2 1.1 ±0.1 2.2 ±0.1 0.7 ±0.2 55 S 3216-12 3.2 ±0.2 1.6 ±0.2 1.1 ±0.1 1.2 ±0.1 0.8 ±0.2 26.2 T529 END VIEW SIDE VIEW BOTTOM VIEW H F W L S S Case Size Component Dimensions Typical Weight KEMET EIA L W H F S (mg) P 2012–10 2.0±0.1 1.25±0.1 1.0 maximum 0.9±0.1 0.55±0.1 11.4 I 3216–10 3.2±0.2 1.6±0.2 1.0 maximum 1.2±0.1 0.8±0.1 70 © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2076_T52X-530 • 3/20/2020 88 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

KEMET Organic Capacitor (KO-CAP®) T52x/T530 Polymer Electrolytic Capacitors Table 1 – Ratings & Part Number Reference Rated Case Maximum Maximum Voltage Rated Code/ KEMET Part DC Allowable DF ESR MSL Operating VDC at Capacitance Case Number Leakage Ripple Temperature 105°C Size Current Not all µA at 25°C % at 25°C mΩ at 25°C (rms) (See below for Reflow Temp parts are µF KEMET/EIA Maximum/ 120 Hz 100 kHz mA at +45°C °C part options) ≤ 260°C 105°C rated 5 Minutes Maximum Maximum 100 kHz 2 470 V/7343-19 T520V477M002A(1)E040 94 10 40 2,200 3 105 2.5 47 A/3216-18 T520A476M2R5A(1)E090 ^ 11.75 8* 90 1,100 3 105 2.5 68 A/3216-18 T520A686M2R5A(1)E070 ^ 17 8* 70 1,300 3 105 2.5 68 A/3216-18 T520A686M2R5A(1)E080 ^ 17 8* 80 1,200 3 105 2.5 100 T/3528-12 T520T107M2R5A(1)E040 25 8 40 1,600 3 105 2.5 100 T/3528-12 T520T107M2R5A(1)E070 25 8 70 1,200 3 105 2.5 100 T/3528-12 T525T107M2R5A(1)E080 25 10 80 1,100 3 125 2.5 100 B/3528-21 T520B107M2R5A(1)E025 25 8 25 2,300 3 105 2.5 100 B/3528-21 T520B107M2R5A(1)E035 25 8 35 1,900 3 105 2.5 100 B/3528-21 T520B107M2R5A(1)E040 25 8 40 1,800 3 105 2.5 100 B/3528-21 T520B107M2R5A(1)E070 25 8 70 1,300 3 105 2.5 150 U/6032-15 T520U157M2R5A(1)E055 37.5 8 55 1,600 3 105 2.5 220 A/3216-18 T520A227M2R5A(1)E025 ^ 55 8* 25 1,732 3 105 2.5 220 A/3216-18 T520A227M2R5A(1)E035 ^ 55 8* 35 1,500 3 105 2.5 220 B/3528-21 T520B227M2R5A(1)E015 55 8 15 2,900 3 105 2.5 220 B/3528-21 T520B227M2R5A(1)E018 55 8 18 2,700 3 105 2.5 220 B/3528-21 T520B227M2R5A(1)E021 55 8 21 2,500 3 105 2.5 220 B/3528-21 T520B227M2R5A(1)E025 55 8 25 2,300 3 105 2.5 220 B/3528-21 T520B227M2R5A(1)E030 55 8 30 2,100 3 105 2.5 220 B/3528-21 T520B227M2R5A(1)E035 55 8 35 1,900 3 105 2.5 220 B/3528-21 T520B227M2R5A(1)E055 55 8 55 1,500 3 105 2.5 220 B/3528-21 T520B227M2R5A(1)E070 55 8 70 1,300 3 105 2.5 220 T/3528-12 T520T227M2R5ATE070 ^ 55 10* 70 1,200 3 105 2.5 220 U/6032-15 T520U227M2R5A(1)E055 55 8 55 1,600 3 105 2.5 220 C/6032-28 T520C227M2R5A(1)E025 55 8 25 2,600 3 105 2.5 220 C/6032-28 T520C227M2R5A(1)E045 55 8 45 1,900 3 105 2.5 220 W/7343-15 T520W227M2R5A(1)E025 55 10 25 2,700 3 105 2.5 220 V/7343-19 T520V227M2R5A(1)E006 55 10 6 5,600 3 105 2.5 220 V/7343-19 T520V227M2R5A(1)E007 55 10 7 5,200 3 105 2.5 220 V/7343-19 T520V227M2R5A(1)E009 55 10 9 4,600 3 105 2.5 220 V/7343-19 T520V227M2R5A(1)E012 55 10 12 3,900 3 105 2.5 220 V/7343-19 T520V227M2R5A(1)E015 55 10 15 3,500 3 105 2.5 220 V/7343-19 T520V227M2R5A(1)E025 55 10 25 2,700 3 105 2.5 220 V/7343-19 T520V227M2R5A(1)E045 55 10 45 2,000 3 105 2.5 220 D/7343-31 T520D227M2R5A(1)E007 55 10 7 5,700 3 105 2.5 220 D/7343-31 T520D227M2R5A(1)E040 55 10 40 2,400 3 105 2.5 330 B/3528-21 T520B337M2R5ATE009 ^ 82.5 8* 9 3,073 3 105 2.5 330 B/3528-21 T520B337M2R5ATE012 ^ 83 8* 12 2,700 3 105 2.5 330 B/3528-21 T520B337M2R5A(1)E015 82.5 8 15 2,900 3 105 2.5 330 B/3528-21 T520B337M2R5A(1)E018 82.5 8 18 2,700 3 105 2.5 330 B/3528-21 T520B337M2R5A(1)E035 82.5 8 35 1,900 3 105 2.5 330 B/3528-21 T520B337M2R5A(1)E045 82.5 8 45 1,700 3 105 µA at 25°C % at 25°C mΩ at 25°C (See below for mA at +45°C Reflow Temp VDC at 105°C µF KEMET/EIA Maximum/ 120 Hz 100 kHz °C part options) 100 kHz ≤ 260°C 5 Minutes Maximum Maximum Maximum Rated Rated Case Code/ DC Allowable Maximum KEMET Part Number DF ESR MSL Voltage Capacitance Case Size Leakage Ripple Operating Temp Current (1) To complete KEMET part number, insert T = 100% Matte Tin (Sn)-plated, H = Standard Solder coated (SnPb 5% Pb minimum), N = Non-Magnetic 100% Tin (Sn), M = Non-Magnetic (SnPb). Refer to Ordering Information for additional detail. (2) To complete KEMET part number, insert M for ±20% or K for ±10%. Designates Capacitance tolerance. Higher voltage ratings and tighter ESR may be substituted within the same size at KEMET's option. Voltage substitutions will be marked with the higher voltage rating. Substitutions can include better than series. Part numbers marked in blue font are not recommended for new designs. Please use the T521 series instead. Part numbers marked in orange font are not recommended for new designs. Please contact your KEMET representative for a replacement part. ^ Denotes the large reel (13") is not available. * DF measurement condition is 120 Hz/0.5 V /1.5 V DC Bias rms Refer to Ordering Information for additional detail. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2076_T52X-530 • 3/20/2020 99 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

KEMET Organic Capacitor (KO-CAP®) T52x/T530 Polymer Electrolytic Capacitors Table 1 – Ratings & Part Number Reference cont. Rated Case Maximum Maximum Voltage Rated Code/ KEMET Part DC Allowable DF ESR MSL Operating VDC at Capacitance Case Number Leakage Ripple Temperature 105°C Size Current Not all µA at 25°C % at 25°C mΩ at 25°C (rms) (See below for Reflow Temp parts are µF KEMET/EIA Maximum/ 120 Hz 100 kHz mA at +45°C °C part options) ≤ 260°C 105°C rated 5 Minutes Maximum Maximum 100 kHz 2.5 330 B/3528-21 T520B337M2R5A(1)E070 82.5 8 70 1,300 3 105 2.5 330 C/6032-28 T520C337M2R5A(1)E015 82.5 8 15 3,300 3 105 2.5 330 C/6032-28 T520C337M2R5A(1)E018 82.5 8 18 3,000 3 105 2.5 330 C/6032-28 T520C337M2R5A(1)E025 82.5 8 25 2,600 3 105 2.5 330 C/6032-28 T520C337M2R5A(1)E045 82.5 8 45 1,900 3 105 2.5 330 L/6032-19 T520L337M2R5A(1)E009 82.5 8 9 4,100 3 105 2.5 330 L/6032-19 T520L337M2R5A(1)E012 82.5 8 12 3,500 3 105 2.5 330 L/6032-19 T520L337M2R5A(1)E025 82.5 8 25 2,400 3 105 2.5 330 W/7343-15 T520W337M2R5A(1)E015 82.5 10 15 3,500 3 105 2.5 330 W/7343-15 T520W337M2R5A(1)E025 82.5 10 25 2,700 3 105 2.5 330 W/7343-15 T520W337M2R5A(1)E040 82.5 10 40 2,100 3 105 2.5 330 V/7343-19 T520V337M2R5A(1)E006 82.5 10 6 5,600 3 105 2.5 330 V/7343-19 T520V337M2R5A(1)E007 82.5 10 7 5,200 3 105 2.5 330 V/7343-19 T520V337M2R5A(1)E009 82.5 10 9 4,600 3 105 2.5 330 V/7343-19 T520V337M2R5A(1)E012 82.5 10 12 3,900 3 105 2.5 330 V/7343-19 T520V337M2R5A(1)E015 82.5 10 15 3,500 3 105 2.5 330 V/7343-19 T520V337M2R5A(1)E018 82.5 10 18 3,200 3 105 2.5 330 V/7343-19 T520V337M2R5A(1)E025 82.5 10 25 2,700 3 105 2.5 330 V/7343-19 T520V337M2R5A(1)E040 82.5 10 40 2,200 3 105 2.5 330 D/7343-31 T520D337M2R5A(1)E006 82.5 10 6 6,100 3 105 2.5 330 D/7343-31 T520D337M2R5A(1)E007 82.5 10 7 5,700 3 105 2.5 330 D/7343-31 T525D337M2R5A(1)E025 82.5 10 25 3,000 3 125 2.5 470 B/3528-21 T520B477M2R5ATE014 ^ 188 8* 14 3,000 3 85 2.5 470 V/7343-19 T520V477M2R5A(1)E006 117.5 10 6 5,600 3 105 2.5 470 V/7343-19 T520V477M2R5A(1)E007 117.5 10 7 5,200 3 105 2.5 470 V/7343-19 T520V477M2R5A(1)E009 117.5 10 9 4,600 3 105 2.5 470 V/7343-19 T520V477M2R5A(1)E012 117.5 10 12 3,900 3 105 2.5 470 V/7343-19 T520V477M2R5A(1)E015 117.5 10 15 3,500 3 105 2.5 470 V/7343-19 T520V477M2R5A(1)E018 117.5 10 18 3,200 3 105 2.5 470 C/6032-28 T520C477M2R5A(1)E025 117.5 8 25 2,600 3 105 2.5 470 C/6032-28 T520C477M2R5A(1)E045 117.5 8 45 1,900 3 105 2.5 470 D/7343-31 T530D477M2R5A(1)E005 117.5 8 5 7,100 3 125 2.5 470 D/7343-31 T520D477M2R5A(1)E006 117.5 10 6 6,100 3 105 2.5 470 D/7343-31 T530D477M2R5A(1)E006 117.5 8 6 6,500 3 125 2.5 470 D/7343-31 T520D477M2R5A(1)E007 117.5 10 7 5,700 3 105 2.5 470 D/7343-31 T520D477M2R5A(1)E009 117.5 10 9 5,000 3 105 2.5 470 D/7343-31 T530D477M2R5A(1)E010 117.5 8 10 5,000 3 125 2.5 470 D/7343-31 T525D477M2R5A(1)E025 117.5 10 25 3,000 3 125 2.5 560 D/7343-31 T530D567M2R5A(1)E005 140 8 5 7,100 3 125 2.5 680 D/7343-31 T530D687M2R5A(1)E006 170 8 6 6,500 3 125 2.5 680 D/7343-31 T530D687M2R5A(1)E007 170 8 7 6,000 3 125 2.5 680 D/7343-31 T520D687M2R5A(1)E010 170 10 10 4,700 3 105 µA at 25°C % at 25°C mΩ at 25°C (See below for mA at +45°C Reflow Temp VDC at 105°C µF KEMET/EIA Maximum/ 120 Hz 100 kHz °C part options) 100 kHz ≤ 260°C 5 Minutes Maximum Maximum Maximum Rated Rated Case Code/ DC Allowable Maximum KEMET Part Number DF ESR MSL Voltage Capacitance Case Size Leakage Ripple Operating Temp Current (1) To complete KEMET part number, insert T = 100% Matte Tin (Sn)-plated, H = Standard Solder coated (SnPb 5% Pb minimum), N = Non-Magnetic 100% Tin (Sn), M = Non-Magnetic (SnPb). Refer to Ordering Information for additional detail. (2) To complete KEMET part number, insert M for ±20% or K for ±10%. Designates Capacitance tolerance. Higher voltage ratings and tighter ESR may be substituted within the same size at KEMET's option. Voltage substitutions will be marked with the higher voltage rating. Substitutions can include better than series. Part numbers marked in blue font are not recommended for new designs. Please use the T521 series instead. Part numbers marked in orange font are not recommended for new designs. Please contact your KEMET representative for a replacement part. ^ Denotes the large reel (13") is not available. * DF measurement condition is 120 Hz/0.5 V /1.5 V DC Bias rms Refer to Ordering Information for additional detail. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2076_T52X-530 • 3/20/2020 1100 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

KEMET Organic Capacitor (KO-CAP®) T52x/T530 Polymer Electrolytic Capacitors Table 1 – Ratings & Part Number Reference cont. Rated Case Maximum Maximum Voltage Rated Code/ KEMET Part DC Allowable DF ESR MSL Operating VDC at Capacitance Case Number Leakage Ripple Temperature 105°C Size Current Not all µA at 25°C % at 25°C mΩ at 25°C (rms) (See below for Reflow Temp parts are µF KEMET/EIA Maximum/ 120 Hz 100 kHz mA at +45°C °C part options) ≤ 260°C 105°C rated 5 Minutes Maximum Maximum 100 kHz 2.5 680 D/7343-31 T530D687M2R5A(1)E010 170 8 10 5,000 3 125 2.5 680 D/7343-31 T520D687M2R5A(1)E015 170 10 15 3,900 3 105 2.5 680 D/7343-31 T525D687M2R5A(1)E025 170 10 25 3,000 3 125 2.5 680 D/7343-31 T520D687M2R5A(1)E040 170 10 40 2,400 3 105 2.5 680 Y/7343-40 T530Y687M2R5A(1)E005 170 8 5 7,300 3 125 2.5 680 Y/7343-40 T530Y687M2R5A(1)E006 170 8 6 6,600 3 125 2.5 680 Y/7343-40 T530Y687M2R5A(1)E007 170 8 7 6,100 3 125 2.5 680 Y/7343-40 T520Y687M2R5A(1)E015 170 10 15 4,000 3 105 2.5 680 Y/7343-40 T520Y687M2R5A(1)E025 170 10 25 3,100 3 105 2.5 680 X/7343-43 T530X687M2R5A(1)E006 170 8 6 6,700 3 125 2.5 1000 D/7343-31 T520D108M2R5A(1)E4R5 250 10 4.5 7,100 3 105 2.5 1000 D/7343-31 T520D108M2R5A(1)E006 250 10 6 6,100 3 105 2.5 1000 D/7343-31 T520D108M2R5A(1)E007 250 10 7 5,700 3 105 2.5 1000 D/7343-31 T520D108M2R5A(1)E009 250 10 9 5,000 3 105 2.5 1000 D/7343-31 T520D108M2R5A(1)E010 250 10 10 4,700 3 105 2.5 1000 D/7343-31 T520D108M2R5A(1)E015 250 10 15 3,900 3 105 2.5 1000 D/7343-31 T520D108M2R5A(1)E030 250 10 30 2,700 3 105 2.5 1000 Y/7343-40 T530Y108M2R5A(1)E005 250 8 5 7,300 3 125 2.5 1000 Y/7343-40 T530Y108M2R5A(1)E006 250 8 6 6,600 3 125 2.5 1000 Y/7343-40 T520Y108M2R5A(1)E010 250 10 10 4,900 3 105 2.5 1000 Y/7343-40 T520Y108M2R5A(1)E015 250 10 15 4,000 3 105 2.5 1000 Y/7343-40 T520Y108M2R5A(1)E025 250 10 25 3,100 3 105 2.5 1000 X/7343-43 T530X108M2R5A(1)E004 250 8 4 8,200 3 125 2.5 1000 X/7343-43 T530X108M2R5A(1)E005 250 8 5 7,300 3 125 2.5 1000 X/7343-43 T530X108M2R5A(1)E006 250 8 6 6,700 3 125 2.5 1000 X/7343-43 T520X108M2R5A(1)E010 250 10 10 5,000 3 105 2.5 1500 X/7343-43 T530X158M2R5A(1)E005 375 8 5 7,300 3 125 2.5 1500 X/7343-43 T520X158M2R5A(1)E015 375 10 15 4,100 3 105 3 100 B/3528-21 T525B107M003A(1)E080 30 8 80 1,300 3 125 3 100 B/3528-21 T520B107M003A(1)E025 30 8 25 2,300 3 105 3 100 B/3528-21 T520B107M003A(1)E035 30 8 35 1,900 3 105 3 100 B/3528-21 T520B107M003A(1)E040 30 8 40 1,800 3 105 3 100 B/3528-21 T520B107M003A(1)E070 30 8 70 1,300 3 105 3 150 B/3528-21 T520B157M003A(1)E025 45 8 25 2,300 3 105 3 150 B/3528-21 T520B157M003A(1)E035 45 8 35 1,900 3 105 3 150 B/3528-21 T520B157M003A(1)E040 45 8 40 1,800 3 105 3 150 B/3528-21 T520B157M003A(1)E070 45 8 70 1,300 3 105 3 150 B/3528-21 T525B157M003A(1)E080 45 8 80 1,300 3 125 3 330 V/7343-19 T520V337M003A(1)E009 99 10 9 4,600 3 105 3 330 V/7343-19 T520V337M003A(1)E012 99 10 12 3,900 3 105 3 330 V/7343-19 T520V337M003A(1)E015 99 10 15 3,500 3 105 3 330 V/7343-19 T520V337M003A(1)E025 99 10 25 2,700 3 105 µA at 25°C % at 25°C mΩ at 25°C (See below for mA at +45°C Reflow Temp VDC at 105°C µF KEMET/EIA Maximum/ 120 Hz 100 kHz °C part options) 100 kHz ≤ 260°C 5 Minutes Maximum Maximum Maximum Rated Rated Case Code/ DC Allowable Maximum KEMET Part Number DF ESR MSL Voltage Capacitance Case Size Leakage Ripple Operating Temp Current (1) To complete KEMET part number, insert T = 100% Matte Tin (Sn)-plated, H = Standard Solder coated (SnPb 5% Pb minimum), N = Non-Magnetic 100% Tin (Sn), M = Non-Magnetic (SnPb). Refer to Ordering Information for additional detail. (2) To complete KEMET part number, insert M for ±20% or K for ±10%. Designates Capacitance tolerance. Higher voltage ratings and tighter ESR may be substituted within the same size at KEMET's option. Voltage substitutions will be marked with the higher voltage rating. Substitutions can include better than series. Part numbers marked in blue font are not recommended for new designs. Please use the T521 series instead. Part numbers marked in orange font are not recommended for new designs. Please contact your KEMET representative for a replacement part. ^ Denotes the large reel (13") is not available. * DF measurement condition is 120 Hz/0.5 V /1.5 V DC Bias rms Refer to Ordering Information for additional detail. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2076_T52X-530 • 3/20/2020 1111 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

KEMET Organic Capacitor (KO-CAP®) T52x/T530 Polymer Electrolytic Capacitors Table 1 – Ratings & Part Number Reference cont. Rated Case Maximum Maximum Voltage Rated Code/ KEMET Part DC Allowable DF ESR MSL Operating VDC at Capacitance Case Number Leakage Ripple Temperature 105°C Size Current Not all µA at 25°C % at 25°C mΩ at 25°C (rms) (See below for Reflow Temp parts are µF KEMET/EIA Maximum/ 120 Hz 100 kHz mA at +45°C °C part options) ≤ 260°C 105°C rated 5 Minutes Maximum Maximum 100 kHz 3 330 D/7343-31 T525D337M003A(1)E025 99 10 25 3,000 3 125 3 470 D/7343-31 T530D477M003A(1)E010 141 8 10 5,000 3 125 3 470 D/7343-31 T525D477M003A(1)E025 141 10 25 3,000 3 125 3 680 D/7343-31 T530D687M003A(1)E010 204 8 10 5,000 3 125 3 680 D/7343-31 T520D687M003A(1)E015 204 10 15 3,900 3 105 3 680 D/7343-31 T525D687M003A(1)E025 204 10 25 3,000 3 125 3 680 D/7343-31 T520D687M003A(1)E040 204 10 40 2,400 3 105 3 1000 X/7343-43 T530X108M003A(1)E010 300 8 10 5,200 3 125 3 1000 X/7343-43 T520X108M003A(1)E015 300 10 15 4,100 3 105 3 1000 X/7343-43 T520X108M003A(1)E030 300 10 30 2,900 3 105 3 1500 X/7343-43 T530X158M003A(1)E008 450 8 8 5,800 3 125 4 15 T/3528-12 T520T156M004A(1)E100 6 8 100 1,000 3 105 4 33 A/3216-18 T520A336M004A(1)E070 ^ 13.2 8* 70 1,300 3 105 4 33 A/3216-18 T520A336M004A(1)E080 ^ 13.2 8* 80 1,200 3 105 4 47 A/3216-18 T520A476M004A(1)E070 ^ 18.8 8* 70 1,300 3 105 4 47 A/3216-18 T520A476M004A(1)E080 ^ 18.8 8* 80 1,200 3 105 4 47 T/3528-12 T520T476M004A(1)E070 18.8 8 70 1,200 3 105 4 68 A/3216-18 T520A686M004A(1)E180 ^ 27 8* 180 800 3 105 4 68 T/3528-12 T520T686M004A(1)E070 27.2 8 70 1,200 3 105 4 68 B/3528-21 T520B686M004A(1)E025 27.2 8 25 2,300 3 105 4 68 B/3528-21 T520B686M004A(1)E035 27.2 8 35 1,900 3 105 4 68 B/3528-21 T520B686M004A(1)E040 27.2 8 40 1,800 3 105 4 68 B/3528-21 T520B686M004A(1)E070 27.2 8 70 1,300 3 105 4 68 B/3528-21 T525B686M004A(1)E080 27.2 8 80 1,300 3 125 4 68 U/6032-15 T520U686M004A(1)E055 27.2 8 55 1,600 3 105 4 100 I/3216-10 T527I107M004ATE200 ^ 40 8* 200 775 3 105 4 100 A/3216-18 T520A107M004A(1)E150 ^ 40 8* 150 900 3 105 4 100 A/3216-18 T520A107M004A(1)E200 ^ 40 8* 200 700 3 105 4 100 T/3528-12 T520T107M004A(1)E070 40 8 70 1,200 3 105 4 100 T/3528-12 T520T107M004A(1)E150 40 8 150 800 3 105 4 100 B/3528-21 T520B107M004A(1)E025 40 8 25 2,300 3 105 4 100 B/3528-21 T520B107M004A(1)E035 40 8 35 1,900 3 105 4 100 B/3528-21 T520B107M004A(1)E040 40 8 40 1,800 3 105 4 100 B/3528-21 T520B107M004A(1)E070 40 8 70 1,300 3 105 4 100 B/3528-21 T525B107M004A(1)E080 40 8 80 1,300 3 125 4 100 U/6032-15 T520U107M004A(1)E055 40 8 55 1,600 3 105 4 150 B/3528-21 T520B157M004A(1)E015 60 8 15 2,900 3 105 4 150 B/3528-21 T520B157M004A(1)E018 60 8 18 2,700 3 105 4 150 B/3528-21 T520B157M004A(1)E025 60 8 25 2,300 3 105 4 150 B/3528-21 T520B157M004A(1)E030 60 8 30 2,100 3 105 4 150 B/3528-21 T520B157M004A(1)E035 60 8 35 1,900 3 105 4 150 B/3528-21 T520B157M004A(1)E040 60 8 40 1,800 3 105 µA at 25°C % at 25°C mΩ at 25°C (See below for mA at +45°C Reflow Temp VDC at 105°C µF KEMET/EIA Maximum/ 120 Hz 100 kHz °C part options) 100 kHz ≤ 260°C 5 Minutes Maximum Maximum Maximum Rated Rated Case Code/ DC Allowable Maximum KEMET Part Number DF ESR MSL Voltage Capacitance Case Size Leakage Ripple Operating Temp Current (1) To complete KEMET part number, insert T = 100% Matte Tin (Sn)-plated, H = Standard Solder coated (SnPb 5% Pb minimum), N = Non-Magnetic 100% Tin (Sn), M = Non-Magnetic (SnPb). Refer to Ordering Information for additional detail. (2) To complete KEMET part number, insert M for ±20% or K for ±10%. Designates Capacitance tolerance. Higher voltage ratings and tighter ESR may be substituted within the same size at KEMET's option. Voltage substitutions will be marked with the higher voltage rating. Substitutions can include better than series. Part numbers marked in blue font are not recommended for new designs. Please use the T521 series instead. Part numbers marked in orange font are not recommended for new designs. Please contact your KEMET representative for a replacement part. ^ Denotes the large reel (13") is not available. * DF measurement condition is 120 Hz/0.5 V /1.5 V DC Bias rms Refer to Ordering Information for additional detail. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2076_T52X-530 • 3/20/2020 1122 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

KEMET Organic Capacitor (KO-CAP®) T52x/T530 Polymer Electrolytic Capacitors Table 1 – Ratings & Part Number Reference cont. Rated Case Maximum Maximum Voltage Rated Code/ KEMET Part DC Allowable DF ESR MSL Operating VDC at Capacitance Case Number Leakage Ripple Temperature 105°C Size Current Not all µA at 25°C % at 25°C mΩ at 25°C (rms) (See below for Reflow Temp parts are µF KEMET/EIA Maximum/ 120 Hz 100 kHz mA at +45°C °C part options) ≤ 260°C 105°C rated 5 Minutes Maximum Maximum 100 kHz 4 150 B/3528-21 T520B157M004A(1)E070 60 8 70 1,300 3 105 4 150 U/6032-15 T520U157M004A(1)E055 60 8 55 1,600 3 105 4 150 C/6032-28 T520C157M004A(1)E015 60 8 15 3,300 3 105 4 150 C/6032-28 T520C157M004A(1)E025 60 8 25 2,600 3 105 4 150 C/6032-28 T520C157M004A(1)E045 60 8 45 1,900 3 105 4 150 C/6032-28 T520C157M004A(1)E100 60 8 100 1,300 3 105 4 150 V/7343-19 T520V157M004A(1)E007 60 10 7 5,200 3 105 4 150 V/7343-19 T520V157M004A(1)E009 60 10 9 4,600 3 105 4 150 V/7343-19 T520V157M004A(1)E012 60 10 12 3,900 3 105 4 150 V/7343-19 T520V157M004A(1)E015 60 10 15 3,500 3 105 4 150 V/7343-19 T520V157M004A(1)E025 60 10 25 2,700 3 105 4 150 D/7343-31 T520D157M004A(1)E007 60 10 7 5,700 3 105 4 220 T/3528-12 T520T227M004ATE035 ^ 176 10* 35 1,463 3 105 4 220 B/3528-21 T520B227M004A(1)E035 88 8 35 1,900 3 105 4 220 B/3528-21 T520B227M004A(1)E045 88 8 45 1,700 3 105 4 220 B/3528-21 T520B227M004A(1)E070 88 8 70 1,300 3 105 4 220 C/6032-28 T520C227M004A(1)E015 88 8 15 3,300 3 105 4 220 C/6032-28 T520C227M004A(1)E018 88 8 18 3,000 3 105 4 220 C/6032-28 T520C227M004A(1)E025 88 8 25 2,600 3 105 4 220 C/6032-28 T520C227M004A(1)E045 88 8 45 1,900 3 105 4 220 C/6032-28 T520C227M004A(1)E055 88 8 55 1,700 3 105 4 220 L/6032-19 T520L227M004A(1)E012 88 8 12 3,500 3 105 4 220 L/6032-19 T520L227M004A(1)E025 88 8 25 2,400 3 105 4 220 W/7343-15 T520W227M004A(1)E025 88 10 25 2,700 3 105 4 220 W/7343-15 T520W227M004A(1)E040 88 10 40 2,100 3 105 4 220 V/7343-19 T520V227M004A(1)E006 88 10 6 5,600 3 105 4 220 V/7343-19 T520V227M004A(1)E007 88 10 7 5,200 3 105 4 220 V/7343-19 T520V227M004A(1)E009 88 10 9 4,600 3 105 4 220 V/7343-19 T520V227M004A(1)E012 88 10 12 3,900 3 105 4 220 V/7343-19 T520V227M004A(1)E015 88 10 15 3,500 3 105 4 220 V/7343-19 T520V227M004A(1)E018 88 10 18 3,200 3 105 4 220 V/7343-19 T520V227M004A(1)E025 88 10 25 2,700 3 105 4 220 V/7343-19 T520V227M004A(1)E040 88 10 40 2,200 3 105 4 220 V/7343-19 T520V227M004A(1)E045 88 10 45 2,000 3 105 4 220 D/7343-31 T520D227M004A(1)E006 88 10 6 6,100 3 105 4 220 D/7343-31 T520D227M004A(1)E007 88 10 7 5,700 3 105 4 220 D/7343-31 T520D227M004A(1)E012 88 10 12 4,300 3 105 4 220 D/7343-31 T525D227M004A(1)E025 88 10 25 3,000 3 125 4 220 D/7343-31 T520D227M004A(1)E065 88 10 65 1,900 3 105 4 330 C/6032-28 T520C337M004A(1)E025 132 8 25 2,600 3 105 4 330 C/6032-28 T520C337M004A(1)E045 132 8 45 1,900 3 105 4 330 V/7343-19 T520V337M004A(1)E007 132 10 7 5,200 3 105 µA at 25°C % at 25°C mΩ at 25°C (See below for mA at +45°C Reflow Temp VDC at 105°C µF KEMET/EIA Maximum/ 120 Hz 100 kHz °C part options) 100 kHz ≤ 260°C 5 Minutes Maximum Maximum Maximum Rated Rated Case Code/ DC Allowable Maximum KEMET Part Number DF ESR MSL Voltage Capacitance Case Size Leakage Ripple Operating Temp Current (1) To complete KEMET part number, insert T = 100% Matte Tin (Sn)-plated, H = Standard Solder coated (SnPb 5% Pb minimum), N = Non-Magnetic 100% Tin (Sn), M = Non-Magnetic (SnPb). Refer to Ordering Information for additional detail. (2) To complete KEMET part number, insert M for ±20% or K for ±10%. Designates Capacitance tolerance. Higher voltage ratings and tighter ESR may be substituted within the same size at KEMET's option. Voltage substitutions will be marked with the higher voltage rating. Substitutions can include better than series. Part numbers marked in blue font are not recommended for new designs. Please use the T521 series instead. Part numbers marked in orange font are not recommended for new designs. Please contact your KEMET representative for a replacement part. ^ Denotes the large reel (13") is not available. * DF measurement condition is 120 Hz/0.5 V /1.5 V DC Bias rms Refer to Ordering Information for additional detail. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2076_T52X-530 • 3/20/2020 1133 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

KEMET Organic Capacitor (KO-CAP®) T52x/T530 Polymer Electrolytic Capacitors Table 1 – Ratings & Part Number Reference cont. Rated Case Maximum Maximum Voltage Rated Code/ KEMET Part DC Allowable DF ESR MSL Operating VDC at Capacitance Case Number Leakage Ripple Temperature 105°C Size Current Not all µA at 25°C % at 25°C mΩ at 25°C (rms) (See below for Reflow Temp parts are µF KEMET/EIA Maximum/ 120 Hz 100 kHz mA at +45°C °C part options) ≤ 260°C 105°C rated 5 Minutes Maximum Maximum 100 kHz 4 330 V/7343-19 T520V337M004A(1)E009 132 10 9 4,600 3 105 4 330 V/7343-19 T520V337M004A(1)E012 132 10 12 3,900 3 105 4 330 V/7343-19 T520V337M004A(1)E018 132 10 18 3,200 3 105 4 330 V/7343-19 T520V337M004A(1)E025 132 10 25 2,700 3 105 4 330 V/7343-19 T520V337M004A(1)E040 132 10 40 2,200 3 105 4 330 D/7343-31 T530D337M004A(1)E005 132 8 5 7,100 3 125 4 330 D/7343-31 T520D337M004A(1)E006 132 10 6 6,100 3 105 4 330 D/7343-31 T530D337M004A(1)E006 132 8 6 6,500 3 125 4 330 D/7343-31 T520D337M004A(1)E007 132 10 7 5,700 3 105 4 330 D/7343-31 T520D337M004A(1)E009 132 10 9 5,000 3 105 4 330 D/7343-31 T520D337M004A(1)E012 132 10 12 4,300 3 105 4 330 D/7343-31 T520D337M004A(1)E015 132 10 15 3,900 3 105 4 330 D/7343-31 T525D337M004A(1)E025 132 10 25 3,000 3 125 4 330 D/7343-31 T520D337M004A(1)E040 132 10 40 2,400 3 105 4 330 D/7343-31 T520D337M004A(1)E045 132 10 45 2,200 3 105 4 470 D/7343-31 T530D477M004A(1)E006 188 8 6 6,500 3 125 4 470 D/7343-31 T520D477M004A(1)E010 188 10 10 4,700 3 105 4 470 D/7343-31 T530D477M004A(1)E010 188 8 10 5,000 3 125 4 470 D/7343-31 T520D477M004A(1)E012 188 10 12 4,300 3 105 4 470 D/7343-31 T520D477M004A(1)E015 188 10 15 3,900 3 105 4 470 D/7343-31 T520D477M004A(1)E018 188 10 18 3,500 3 105 4 470 D/7343-31 T520D477M004A(1)E025 188 10 25 3,000 3 105 4 470 D/7343-31 T525D477M004A(1)E025 188 10 25 3,000 3 125 4 470 D/7343-31 T520D477M004A(1)E040 188 10 40 2,400 3 105 4 470 D/7343-31 T525D477M004A(1)E040 188 10 40 2,400 3 125 4 470 Y/7343-40 T530Y477M004A(1)E005 188 8 5 7,300 3 125 4 470 Y/7343-40 T530Y477M004A(1)E006 188 8 6 6,600 3 125 4 680 D/7343-31 T520D687M004A(1)E012 272 10 12 4,300 3 105 4 680 D/7343-31 T520D687M004A(1)E015 272 10 15 3,900 3 105 4 680 D/7343-31 T520D687M004A(1)E025 272 10 25 3,000 3 105 4 680 Y/7343-40 T530Y687M004A(1)E005 272 8 5 7,300 3 125 4 680 Y/7343-40 T520Y687M004A(1)E010 272 10 10 4,900 3 105 4 680 Y/7343-40 T520Y687M004A(1)E015 272 10 15 4,000 3 105 4 680 Y/7343-40 T520Y687M004A(1)E025 272 10 25 3,100 3 105 4 680 X/7343-43 T530X687M004A(1)E004 272 8 4 8,200 3 125 4 680 X/7343-43 T530X687M004A(1)E005 272 8 5 7,300 3 125 4 680 X/7343-43 T530X687M004A(1)E006 272 8 6 6,700 3 125 4 680 X/7343-43 T520X687M004A(1)E010 272 10 10 5,000 3 105 4 680 X/7343-43 T530X687M004A(1)E010 272 8 10 5,200 3 125 4 680 X/7343-43 T520X687M004A(1)E015 272 10 15 4,100 3 105 4 680 X/7343-43 T520X687M004A(1)E035 272 10 35 2,700 3 105 4 1000 X/7343-43 T530X108M004A(1)E006 400 8 6 6,700 3 125 µA at 25°C % at 25°C mΩ at 25°C (See below for mA at +45°C Reflow Temp VDC at 105°C µF KEMET/EIA Maximum/ 120 Hz 100 kHz °C part options) 100 kHz ≤ 260°C 5 Minutes Maximum Maximum Maximum Rated Rated Case Code/ DC Allowable Maximum KEMET Part Number DF ESR MSL Voltage Capacitance Case Size Leakage Ripple Operating Temp Current (1) To complete KEMET part number, insert T = 100% Matte Tin (Sn)-plated, H = Standard Solder coated (SnPb 5% Pb minimum), N = Non-Magnetic 100% Tin (Sn), M = Non-Magnetic (SnPb). Refer to Ordering Information for additional detail. (2) To complete KEMET part number, insert M for ±20% or K for ±10%. Designates Capacitance tolerance. Higher voltage ratings and tighter ESR may be substituted within the same size at KEMET's option. Voltage substitutions will be marked with the higher voltage rating. Substitutions can include better than series. Part numbers marked in blue font are not recommended for new designs. Please use the T521 series instead. Part numbers marked in orange font are not recommended for new designs. Please contact your KEMET representative for a replacement part. ^ Denotes the large reel (13") is not available. * DF measurement condition is 120 Hz/0.5 V /1.5 V DC Bias rms Refer to Ordering Information for additional detail. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2076_T52X-530 • 3/20/2020 1144 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

KEMET Organic Capacitor (KO-CAP®) T52x/T530 Polymer Electrolytic Capacitors Table 1 – Ratings & Part Number Reference cont. Rated Case Maximum Maximum Voltage Rated Code/ KEMET Part DC Allowable DF ESR MSL Operating VDC at Capacitance Case Number Leakage Ripple Temperature 105°C Size Current Not all µA at 25°C % at 25°C mΩ at 25°C (rms) (See below for Reflow Temp parts are µF KEMET/EIA Maximum/ 120 Hz 100 kHz mA at +45°C °C part options) ≤ 260°C 105°C rated 5 Minutes Maximum Maximum 100 kHz 6.3 15 T/3528-12 T520T156M006A(1)E100 9.45 8 100 1,000 3 105 6.3 10 P/2012-10 T529P106M006AAE200 ^ 18.9 6* 200 354 3 105 6.3 22 P/2012-10 T529P226M006AAE150 ^ 22 6* 150 408 3 105 6.3 22 P/2012-10 T529P226M006AAE200 ^ 22 6* 200 354 3 105 6.3 22 A/3216-18 T520A226M006A(1)E090 ^ 13.86 8* 90 1,100 3 105 6.3 22 A/3216-18 T520A226M006A(1)E100 ^ 13.86 8* 100 1,100 3 105 6.3 22 T/3528-12 T520T226M006A(1)E100 13.86 8 100 1,000 3 105 6.3 33 A/3216-18 T520A336M006A(1)E070 ^ 20.79 8* 70 1,300 3 105 6.3 33 A/3216-18 T520A336M006A(1)E080 ^ 20.79 8* 80 1,200 3 105 6.3 33 A/3216-18 T520A336M006A(1)E120 ^ 20.79 8 120 1,000 3 105 6.3 33 T/3528-12 T520T336M006A(1)E070 20.79 8 70 1,200 3 105 6.3 33 B/3528-21 T520B336M006A(1)E025 20.79 8 25 2,300 3 105 6.3 33 B/3528-21 T520B336M006A(1)E035 20.79 8 35 1,900 3 105 6.3 33 B/3528-21 T520B336M006A(1)E040 20.79 8 40 1,800 3 105 6.3 33 B/3528-21 T520B336M006A(1)E070 20.79 8 70 1,300 3 105 6.3 33 B/3528-21 T525B336M006A(1)E080 20.79 8 80 1,300 3 125 6.3 33 C/6032-28 T520C336M006A(1)E100 20.79 8 100 1,300 3 105 6.3 47 P/2012-10 T529P476M006AAE200 ^ 29.61 6* 200 354 3 105 6.3 47 P/2012-10 T529P476M006AAE150 ^ 29.6 6* 150 408 3 105 6.3 47 I/3216-10 T527I476M006ATE200 ^ 29.6 6* 200 548 3 105 6.3 47 A/3216-18 T520A476M006A(1)E150 ^ 29.61 8* 150 900 3 105 6.3 47 T/3528-12 T520T476M006A(1)E040 29.61 8 40 1,600 3 105 6.3 47 T/3528-12 T520T476M006A(1)E070 29.61 8 70 1,200 3 105 6.3 47 T/3528-12 T525T476M006A(1)E080 29.61 8 80 1,100 3 125 6.3 47 B/3528-21 T520B476M006A(1)E025 29.61 8 25 2,300 3 105 6.3 47 B/3528-21 T520B476M006A(1)E035 29.61 8 35 1,900 3 105 6.3 47 B/3528-21 T520B476M006A(1)E040 29.61 8 40 1,800 3 105 6.3 47 B/3528-21 T520B476M006A(1)E070 29.61 8 70 1,300 3 105 6.3 47 B/3528-21 T525B476M006A(1)E070 29.61 8 70 1,300 3 125 6.3 47 B/3528-21 T525B476M006A(1)E080 29.61 8 80 1,300 3 125 6.3 68 A/3216-18 T520A686M006A(1)E150 ^ 42.84 8* 150 900 3 105 6.3 68 T/3528-12 T520T686M006A(1)E070 42.84 8 70 1,200 3 105 6.3 68 T/3528-12 T520T686M006A(1)E150 42.84 8 150 800 3 105 6.3 68 B/3528-21 T520B686M006A(1)E025 42.84 8 25 2,300 3 105 6.3 68 B/3528-21 T520B686M006A(1)E035 42.84 8 35 1,900 3 105 6.3 68 B/3528-21 T520B686M006A(1)E040 42.84 8 40 1,800 3 105 6.3 68 B/3528-21 T520B686M006A(1)E070 42.84 8 70 1,300 3 105 6.3 68 B/3528-21 T525B686M006A(1)E080 42.84 8 80 1,300 3 125 6.3 68 U/6032-15 T520U686M006A(1)E055 42.84 8 55 1,600 3 105 6.3 68 U/6032-15 T520U686M006A(1)E070 42.84 8 70 1,400 3 105 6.3 68 C/6032-28 T520C686M006A(1)E100 42.84 8 100 1,300 3 105 6.3 100 I/3216-10 T527I107M006ATE200 ^ 63.0 8* 200 775 3 105 µA at 25°C % at 25°C mΩ at 25°C (See below for mA at +45°C Reflow Temp VDC at 105°C µF KEMET/EIA Maximum/ 120 Hz 100 kHz °C part options) 100 kHz ≤ 260°C 5 Minutes Maximum Maximum Maximum Rated Rated Case Code/ DC Allowable Maximum KEMET Part Number DF ESR MSL Voltage Capacitance Case Size Leakage Ripple Operating Temp Current (1) To complete KEMET part number, insert T = 100% Matte Tin (Sn)-plated, H = Standard Solder coated (SnPb 5% Pb minimum), N = Non-Magnetic 100% Tin (Sn), M = Non-Magnetic (SnPb). Refer to Ordering Information for additional detail. (2) To complete KEMET part number, insert M for ±20% or K for ±10%. Designates Capacitance tolerance. Higher voltage ratings and tighter ESR may be substituted within the same size at KEMET's option. Voltage substitutions will be marked with the higher voltage rating. Substitutions can include better than series. Part numbers marked in blue font are not recommended for new designs. Please use the T521 series instead. Part numbers marked in orange font are not recommended for new designs. Please contact your KEMET representative for a replacement part. ^ Denotes the large reel (13") is not available. * DF measurement condition is 120 Hz/0.5 V /1.5 V DC Bias rms Refer to Ordering Information for additional detail. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2076_T52X-530 • 3/20/2020 1155 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

KEMET Organic Capacitor (KO-CAP®) T52x/T530 Polymer Electrolytic Capacitors Table 1 – Ratings & Part Number Reference cont. Rated Case Maximum Maximum Voltage Rated Code/ KEMET Part DC Allowable DF ESR MSL Operating VDC at Capacitance Case Number Leakage Ripple Temperature 105°C Size Current Not all µA at 25°C % at 25°C mΩ at 25°C (rms) (See below for Reflow Temp parts are µF KEMET/EIA Maximum/ 120 Hz 100 kHz mA at +45°C °C part options) ≤ 260°C 105°C rated 5 Minutes Maximum Maximum 100 kHz 6.3 100 I/3216-10 T527I107M006ATE100 ^ 63.0 8* 100 775 3 105 6.3 100 I/3216-10 T527I107M006ATE070 ^ 63.0 8* 70 1,134 3 105 6.3 100 A/3216-18 T520A107M006ATE070 ^ 63.0 8* 70 1,035 3 105 6.3 100 A/3216-18 T520A107M006ATE045 ^ 63.0 8* 45 1,600 3 105 6.3 100 A/3216-18 T520A107M006ATE035 ^ 63.0 8* 35 1,500 3 105 6.3 100 A/3216-18 T520A107M006ATE025 ^ 63.0 8* 25 1,732 3 105 6.3 100 T/3528-12 T520T107M006APE070 63.0 8 70 1,200 3 105 6.3 100 T/3528-12 T520T107M006APE055 63.0 8 55 1,200 3 105 6.3 100 B/3528-21 T520B107M006A(1)E015 63.0 8 15 2,900 3 105 6.3 100 B/3528-21 T520B107M006A(1)E018 63.0 8 18 2,700 3 105 6.3 100 B/3528-21 T520B107M006A(1)E025 63.0 8 25 2,300 3 105 6.3 100 B/3528-21 T520B107M006A(1)E035 63.0 8 35 1,900 3 105 6.3 100 B/3528-21 T520B107M006A(1)E040 63.0 8 40 1,800 3 105 6.3 100 B/3528-21 T520B107M006A(1)E045 63.0 8 45 1,700 3 105 6.3 100 B/3528-21 T520B107M006A(1)E070 63.0 8 70 1,300 3 105 6.3 100 U/6032-15 T520U107M006A(1)E055 63.0 8 55 1,600 3 105 6.3 100 W/7343-15 T520W107M006A(1)E040 63.0 10 40 2,100 3 105 6.3 100 V/7343-19 T520V107M006A(1)E009 63.0 10 9 4,600 3 105 6.3 100 V/7343-19 T520V107M006A(1)E012 63.0 10 12 3,900 3 105 6.3 100 V/7343-19 T520V107M006A(1)E015 63.0 10 15 3,500 3 105 6.3 100 V/7343-19 T520V107M006A(1)E045 63.0 10 45 2,000 3 105 6.3 100 C/6032-28 T520C107M006A(1)E025 63.0 8 25 2,600 3 105 6.3 100 C/6032-28 T520C107M006A(1)E045 63.0 8 45 1,900 3 105 6.3 120 B/3528-21 T520B127M006A(1)E035 75.6 8 35 1,900 3 105 6.3 150 M/3528-15 T520M157M006A(1)E035 94.5 8 35 1,900 3 105 6.3 150 M/3528-15 T520M157M006A(1)E070 94.5 8 70 1,300 3 105 6.3 150 M/3528-15 T520M157M006A(1)E150 94.5 8 150 900 3 105 6.3 150 M/3528-15 T520M157M006A(1)E200 94.5 8 200 800 3 105 6.3 150 B/3528-21 T520B157M006A(1)E018 94.5 9 18 2,700 3 105 6.3 150 B/3528-21 T520B157M006A(1)E025 94.5 8 25 2,300 3 105 6.3 150 B/3528-21 T520B157M006A(1)E035 94.5 8 35 1,900 3 105 6.3 150 B/3528-21 T520B157M006A(1)E045 94.5 8 45 1,700 3 105 6.3 150 B/3528-21 T520B157M006A(1)E070 94.5 8 70 1,300 3 105 6.3 150 T/3528-12 T523T157M006APE030 94.5 8 30 1,870 3 105 6.3 150 T/3528-12 T520T157M006ATE035 ^ 94.5 8* 35 1,700 3 105 6.3 150 C/6032-28 T520C157M006A(1)E015 94.5 8 15 3,300 3 105 6.3 150 C/6032-28 T520C157M006A(1)E025 94.5 8 25 2,600 3 105 6.3 150 C/6032-28 T520C157M006A(1)E045 94.5 8 45 1,900 3 105 6.3 150 C/6032-28 T520C157M006A(1)E055 94.5 8 55 1,700 3 105 6.3 150 U/6032-15 T520U157M006A(1)E045 94.5 8 45 1,700 3 105 6.3 150 U/6032-15 T520U157M006A(1)E055 94.5 8 55 1,600 3 105 6.3 150 L/6032-19 T520L157M006A(1)E012 94.5 8 12 3,500 3 105 µA at 25°C % at 25°C mΩ at 25°C (See below for mA at +45°C Reflow Temp VDC at 105°C µF KEMET/EIA Maximum/ 120 Hz 100 kHz °C part options) 100 kHz ≤ 260°C 5 Minutes Maximum Maximum Maximum Rated Rated Case Code/ DC Allowable Maximum KEMET Part Number DF ESR MSL Voltage Capacitance Case Size Leakage Ripple Operating Temp Current (1) To complete KEMET part number, insert T = 100% Matte Tin (Sn)-plated, H = Standard Solder coated (SnPb 5% Pb minimum), N = Non-Magnetic 100% Tin (Sn), M = Non-Magnetic (SnPb). Refer to Ordering Information for additional detail. (2) To complete KEMET part number, insert M for ±20% or K for ±10%. Designates Capacitance tolerance. Higher voltage ratings and tighter ESR may be substituted within the same size at KEMET's option. Voltage substitutions will be marked with the higher voltage rating. Substitutions can include better than series. Part numbers marked in blue font are not recommended for new designs. Please use the T521 series instead. Part numbers marked in orange font are not recommended for new designs. Please contact your KEMET representative for a replacement part. ^ Denotes the large reel (13") is not available. * DF measurement condition is 120 Hz/0.5 V /1.5 V DC Bias rms Refer to Ordering Information for additional detail. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2076_T52X-530 • 3/20/2020 1166 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

KEMET Organic Capacitor (KO-CAP®) T52x/T530 Polymer Electrolytic Capacitors Table 1 – Ratings & Part Number Reference cont. Rated Case Maximum Maximum Voltage Rated Code/ KEMET Part DC Allowable DF ESR MSL Operating VDC at Capacitance Case Number Leakage Ripple Temperature 105°C Size Current Not all µA at 25°C % at 25°C mΩ at 25°C (rms) (See below for Reflow Temp parts are µF KEMET/EIA Maximum/ 120 Hz 100 kHz mA at +45°C °C part options) ≤ 260°C 105°C rated 5 Minutes Maximum Maximum 100 kHz 6.3 150 L/6032-19 T520L157M006A(1)E025 94.5 8 25 2,400 3 105 6.3 150 W/7343-15 T520W157M006A(1)E025 94.5 10 25 2,700 3 105 6.3 150 W/7343-15 T520W157M006A(1)E040 94.5 10 40 2,100 3 105 6.3 150 V/7343-19 T520V157M006A(1)E006 94.5 10 6 5,600 3 105 6.3 150 V/7343-19 T520V157M006A(1)E007 94.5 10 7 5,200 3 105 6.3 150 V/7343-19 T520V157M006A(1)E009 94.5 10 9 4,600 3 105 6.3 150 V/7343-19 T520V157M006A(1)E012 94.5 10 12 3,900 3 105 6.3 150 V/7343-19 T520V157M006A(1)E015 94.5 10 15 3,500 3 105 6.3 150 V/7343-19 T520V157M006A(1)E018 94.5 10 18 3,200 3 105 6.3 150 V/7343-19 T520V157M006A(1)E025 94.5 10 25 2,700 3 105 6.3 150 V/7343-19 T520V157M006A(1)E040 94.5 10 40 2,200 3 105 6.3 150 V/7343-19 T520V157M006A(1)E045 94.5 10 45 2,000 3 105 6.3 150 D/7343-31 T520D157M006A(1)E006 94.5 10 6 6,100 3 105 6.3 150 D/7343-31 T520D157M006A(1)E007 94.5 10 7 5,700 3 105 6.3 150 D/7343-31 T520D157M006A(1)E015 94.5 10 15 3,900 3 105 6.3 150 D/7343-31 T520D157M006A(1)E025 94.5 10 25 3,000 3 105 6.3 150 D/7343-31 T525D157M006A(1)E025 94.5 10 25 3,000 3 125 6.3 150 D/7343-31 T520D157M006A(1)E055 94.5 10 55 2,000 3 105 6.3 220 B/3528-21 T520B227M006A(1)E025 138.6 8 25 2,300 3 105 6.3 220 B/3528-21 T520B227M006A(1)E035 138.6 8 35 1,900 3 105 6.3 220 B/3528-21 T520B227M006A(1)E045 138.6 8 45 1,700 3 105 6.3 220 B/3528-21 T520B227M006A(1)E070 138.6 8 70 1,300 3 105 6.3 220 C/6032-28 T520C227M006A(1)E015 138.6 8 15 3,300 3 105 6.3 220 C/6032-28 T520C227M006A(1)E018 138.6 8 18 3,000 3 105 6.3 220 C/6032-28 T520C227M006A(1)E025 138.6 8 25 2,600 3 105 6.3 220 C/6032-28 T520C227M006A(1)E045 138.6 8 45 1,900 3 105 6.3 220 V/7343-19 T520V227M006A(1)E007 138.6 10 7 5,200 3 105 6.3 220 V/7343-19 T520V227M006A(1)E009 138.6 10 9 4,600 3 105 6.3 220 V/7343-19 T520V227M006A(1)E012 138.6 10 12 3,900 3 105 6.3 220 V/7343-19 T520V227M006A(1)E015 138.6 10 15 3,500 3 105 6.3 220 V/7343-19 T520V227M006A(1)E018 138.6 10 18 3,200 3 105 6.3 220 V/7343-19 T520V227M006A(1)E025 138.6 10 25 2,700 3 105 6.3 220 V/7343-19 T520V227M006A(1)E040 138.6 10 40 2,200 3 105 6.3 220 D/7343-31 T530D227M006A(1)E005 138.6 8 5 7,100 3 125 6.3 220 D/7343-31 T520D227M006A(1)E006 138.6 10 6 6,100 3 105 6.3 220 D/7343-31 T530D227M006A(1)E006 138.6 8 6 6,500 3 125 6.3 220 D/7343-31 T520D227M006A(1)E007 138.6 10 7 5,700 3 105 6.3 220 D/7343-31 T520D227M006A(1)E009 138.6 10 9 5,000 3 105 6.3 220 D/7343-31 T520D227M006A(1)E015 138.6 10 15 3,900 3 105 6.3 220 D/7343-31 T520D227M006A(1)E018 138.6 10 18 3,500 3 105 6.3 220 D/7343-31 T520D227M006A(1)E025 138.6 10 25 3,000 3 105 6.3 220 D/7343-31 T525D227M006A(1)E025 138.6 10 25 3,000 3 125 µA at 25°C % at 25°C mΩ at 25°C (See below for mA at +45°C Reflow Temp VDC at 105°C µF KEMET/EIA Maximum/ 120 Hz 100 kHz °C part options) 100 kHz ≤ 260°C 5 Minutes Maximum Maximum Maximum Rated Rated Case Code/ DC Allowable Maximum KEMET Part Number DF ESR MSL Voltage Capacitance Case Size Leakage Ripple Operating Temp Current (1) To complete KEMET part number, insert T = 100% Matte Tin (Sn)-plated, H = Standard Solder coated (SnPb 5% Pb minimum), N = Non-Magnetic 100% Tin (Sn), M = Non-Magnetic (SnPb). Refer to Ordering Information for additional detail. (2) To complete KEMET part number, insert M for ±20% or K for ±10%. Designates Capacitance tolerance. Higher voltage ratings and tighter ESR may be substituted within the same size at KEMET's option. Voltage substitutions will be marked with the higher voltage rating. Substitutions can include better than series. Part numbers marked in blue font are not recommended for new designs. Please use the T521 series instead. Part numbers marked in orange font are not recommended for new designs. Please contact your KEMET representative for a replacement part. ^ Denotes the large reel (13") is not available. * DF measurement condition is 120 Hz/0.5 V /1.5 V DC Bias rms Refer to Ordering Information for additional detail. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2076_T52X-530 • 3/20/2020 1177 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

KEMET Organic Capacitor (KO-CAP®) T52x/T530 Polymer Electrolytic Capacitors Table 1 – Ratings & Part Number Reference cont. Rated Case Maximum Maximum Voltage Rated Code/ KEMET Part DC Allowable DF ESR MSL Operating VDC at Capacitance Case Number Leakage Ripple Temperature 105°C Size Current Not all µA at 25°C % at 25°C mΩ at 25°C (rms) (See below for Reflow Temp parts are µF KEMET/EIA Maximum/ 120 Hz 100 kHz mA at +45°C °C part options) ≤ 260°C 105°C rated 5 Minutes Maximum Maximum 100 kHz 6.3 220 D/7343-31 T520D227M006A(1)E040 138.6 10 40 2,400 3 105 6.3 220 D/7343-31 T520D227M006A(1)E050 138.6 10 50 2,100 3 105 6.3 330 B/3528-21 T520B337M006A(1)E040 207.9 8 40 1,800 3 85 6.3 330 B/3528-21 T520B337M006A(1)E070 208 8 70 1,300 3 85 6.3 330 V/7343-19 T520V337M006A(1)E015 207.9 10 15 3,500 3 105 6.3 330 V/7343-19 T520V337M006A(1)E018 207.9 10 18 3,200 3 105 6.3 330 V/7343-19 T520V337M006A(1)E025 207.9 10 25 2,700 3 105 6.3 330 V/7343-19 T520V337M006A(1)E040 207.9 10 40 2,200 3 105 6.3 330 V/7343-19 T520V337M006A(1)E045 207.9 10 45 2,000 3 105 6.3 330 D/7343-31 T530D337M006A(1)E006 207.9 8 6 6,500 3 125 6.3 330 D/7343-31 T520D337M006A(1)E009 207.9 10 9 5,000 3 105 6.3 330 D/7343-31 T520D337M006A(1)E010 207.9 10 10 4,700 3 105 6.3 330 D/7343-31 T530D337M006A(1)E010 207.9 8 10 5,000 3 125 6.3 330 D/7343-31 T520D337M006A(1)E015 207.9 10 15 3,900 3 105 6.3 330 D/7343-31 T520D337M006A(1)E018 207.9 10 18 3,500 3 105 6.3 330 D/7343-31 T520D337M006A(1)E025 207.9 10 25 3,000 3 105 6.3 330 D/7343-31 T525D337M006A(1)E025 207.9 10 25 3,000 3 125 6.3 330 D/7343-31 T520D337M006A(1)E040 207.9 10 40 2,400 3 105 6.3 330 D/7343-31 T525D337M006A(1)E040 207.9 10 40 2,400 3 125 6.3 330 D/7343-31 T520D337M006A(1)E045 207.9 10 45 2,200 3 105 6.3 330 Y/7343-40 T530Y337M006A(1)E005 207.9 8 5 7,300 3 125 6.3 330 Y/7343-40 T530Y337M006A(1)E006 207.9 8 6 6,600 3 125 6.3 330 Y/7343-40 T520Y337M006A(1)E010 207.9 10 10 4,900 3 105 6.3 330 Y/7343-40 T530Y337M006A(1)E010 207.9 8 10 5,100 3 125 6.3 330 Y/7343-40 T520Y337M006A(1)E015 207.9 10 15 4,000 3 105 6.3 330 Y/7343-40 T520Y337M006A(1)E025 207.9 10 25 3,100 3 105 6.3 330 Y/7343-40 T520Y337M006A(1)E040 207.9 10 40 2,500 3 105 6.3 470 W/7343-15 T520W477M006A(1)E055 296.1 10 55 1,800 3 85 6.3 470 W/7343-15 T520W477M006A(1)E035 296.1 9 35 2,300 3 85 6.3 470 V/7343-19 T520V477M006A(1)E055 296.1 10 55 1,800 3 105 6.3 470 V/7343-19 T520V477M006A(1)E035 296.1 10 35 2,300 3 105 6.3 470 Y/7343-40 T530Y477M006A(1)E005 296.1 8 5 7,300 3 125 6.3 470 Y/7343-40 T520Y477M006A(1)E010 296.1 10 10 4,900 3 105 6.3 470 Y/7343-40 T520Y477M006A(1)E015 296.1 10 15 4,000 3 105 6.3 470 Y/7343-40 T520Y477M006A(1)E018 296.1 10 18 3,700 3 105 6.3 470 Y/7343-40 T520Y477M006A(1)E025 296.1 10 25 3,100 3 105 6.3 470 Y/7343-40 T520Y477M006A(1)E035 296.1 10 35 2,600 3 105 6.3 470 Y/7343-40 T525Y477M006A(1)E035 296.1 10 35 2,600 3 125 6.3 470 D/7343-31 T520D477M006A(1)E015 296.1 10 15 3,900 3 105 6.3 470 D/7343-31 T520D477(2)006A(1)E025 296.1 10 25 3,000 3 105 6.3 470 D/7343-31 T520D477M006A(1)E030 296.1 10 30 2,700 3 105 6.3 470 X/7343-43 T530X477M006A(1)E004 296.1 8 4 8,200 3 125 µA at 25°C % at 25°C mΩ at 25°C (See below for mA at +45°C Reflow Temp VDC at 105°C µF KEMET/EIA Maximum/ 120 Hz 100 kHz °C part options) 100 kHz ≤ 260°C 5 Minutes Maximum Maximum Maximum Rated Rated Case Code/ DC Allowable Maximum KEMET Part Number DF ESR MSL Voltage Capacitance Case Size Leakage Ripple Operating Temp Current (1) To complete KEMET part number, insert T = 100% Matte Tin (Sn)-plated, H = Standard Solder coated (SnPb 5% Pb minimum), N = Non-Magnetic 100% Tin (Sn), M = Non-Magnetic (SnPb). Refer to Ordering Information for additional detail. (2) To complete KEMET part number, insert M for ±20% or K for ±10%. Designates Capacitance tolerance. Higher voltage ratings and tighter ESR may be substituted within the same size at KEMET's option. Voltage substitutions will be marked with the higher voltage rating. Substitutions can include better than series. Part numbers marked in blue font are not recommended for new designs. Please use the T521 series instead. Part numbers marked in orange font are not recommended for new designs. Please contact your KEMET representative for a replacement part. ^ Denotes the large reel (13") is not available. * DF measurement condition is 120 Hz/0.5 V /1.5 V DC Bias rms Refer to Ordering Information for additional detail. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2076_T52X-530 • 3/20/2020 1188 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

KEMET Organic Capacitor (KO-CAP®) T52x/T530 Polymer Electrolytic Capacitors Table 1 – Ratings & Part Number Reference cont. Rated Case Maximum Maximum Voltage Rated Code/ KEMET Part DC Allowable DF ESR MSL Operating VDC at Capacitance Case Number Leakage Ripple Temperature 105°C Size Current Not all µA at 25°C % at 25°C mΩ at 25°C (rms) (See below for Reflow Temp parts are µF KEMET/EIA Maximum/ 120 Hz 100 kHz mA at +45°C °C part options) ≤ 260°C 105°C rated 5 Minutes Maximum Maximum 100 kHz 6.3 470 X/7343-43 T530X477M006A(1)E005 296.1 8 5 7,300 3 125 6.3 470 X/7343-43 T530X477M006A(1)E006 296.1 8 6 6,700 3 125 6.3 470 X/7343-43 T520X477M006A(1)E010 296.1 10 10 5,000 3 105 6.3 470 X/7343-43 T530X477M006A(1)E010 296.1 8 10 5,200 3 125 6.3 470 X/7343-43 T520X477M006A(1)E018 296.1 10 18 3,700 3 105 6.3 470 X/7343-43 T520X477M006A(1)E035 296.1 10 35 2,700 3 105 6.3 470 X/7343-43 T520X477M006A(1)E040 296.1 10 40 2,500 3 105 6.3 680 Y/7343-40 T520Y687M006A(1)E018 428.4 10 18 3,700 3 105 6.3 680 Y/7343-40 T520Y687M006A(1)E025 428.4 10 25 3,100 3 105 6.3 680 X/7343-43 T530X687M006A(1)E010 428.4 8 10 5,200 3 125 6.3 680 X/7343-43 T530X687M006A(1)E018 428.4 8 18 3,900 3 125 6.3 680 X/7343-43 T520X687M006A(1)E025 428.4 10 25 3,100 3 105 6.3 680 X/7343-43 T520X687M006A(1)E018 428.0 10 18 3,700 3 105 6.3 680 J/7360-15 T523J687M006APE070 428.0 10 70 2,510 3 85 6.3 1000 H/7360-20 T520H108M006A(1)E055 630.0 20 55 1,800 3 85 6.3 1200 H/7360-20 T520H128M006A(1)E070 756.0 20 70 1,200 3 85 6.3 1500 H/7360-20 T520H158M006A(1)E055 945.0 20 55 1,800 3 85 8 22 T/3528-12 T520T226M008A(1)E070 17.6 8 70 1,200 3 105 8 33 T/3528-12 T520T336M008A(1)E070 26.4 8 70 1,200 3 105 8 33 T/3528-12 T520T336M008A(1)E080 26.4 8 80 1,100 3 105 8 33 T/3528-12 T525T336M008A(1)E080 26.4 8 80 1,100 3 125 8 33 B/3528-21 T520B336M008A(1)E025 26.4 8 25 2,300 3 105 8 33 B/3528-21 T520B336M008A(1)E035 26.4 8 35 1,900 3 105 8 33 B/3528-21 T520B336M008A(1)E040 26.4 8 40 1,800 3 105 8 33 B/3528-21 T520B336M008A(1)E070 26.4 8 70 1,300 3 105 8 33 U/6032-15 T520U336M008A(1)E070 26.4 8 70 1,400 3 105 8 47 B/3528-21 T520B476M008A(1)E035 37.6 8 35 1,900 3 105 8 47 B/3528-21 T520B476M008A(1)E070 37.6 8 70 1,300 3 105 8 82 C/6032-28 T520C826M008A(1)E025 65.6 8 25 2,600 3 105 8 82 C/6032-28 T520C826M008A(1)E045 65.6 8 45 1,900 3 105 8 150 D/7343-31 T520D157M008A(1)E025 120 10 25 3,000 3 105 8 150 D/7343-31 T520D157M008A(1)E040 120 10 40 2,400 3 105 8 150 D/7343-31 T520D157M008A(1)E055 120 10 55 2,000 3 105 8 150 V/7343-19 T520V157M008A(1)E040 120 10 40 2,200 3 105 10 10 P/2012-10 T529P106M010AAE200 ^ 30 6* 200 354 3 105 10 10 A/3216-18 T520A106M010A(1)E080 ^ 10 8* 80 1,200 3 105 10 10 A/3216-18 T525A106M010A(1)E080 ^ 10 8 80 1,200 3 125 10 15 A/3216-18 T520A156M010A(1)E080 ^ 15 8* 80 1,200 3 105 10 22 P/2012-10 T529P226M010AAE150 ^ 66 6* 150 408 3 105 10 22 P/2012-10 T529P226M010AAE200 ^ 66 6* 200 354 3 105 10 22 I/3216-10 T527I226M010ATE200 ^ 22 8* 200 548 3 105 10 22 A/3216-18 T520A226M010A(1)E080 ^ 22 8* 80 1,200 3 105 µA at 25°C % at 25°C mΩ at 25°C (See below for mA at +45°C Reflow Temp VDC at 105°C µF KEMET/EIA Maximum/ 120 Hz 100 kHz °C part options) 100 kHz ≤ 260°C 5 Minutes Maximum Maximum Maximum Rated Rated Case Code/ DC Allowable Maximum KEMET Part Number DF ESR MSL Voltage Capacitance Case Size Leakage Ripple Operating Temp Current (1) To complete KEMET part number, insert T = 100% Matte Tin (Sn)-plated, H = Standard Solder coated (SnPb 5% Pb minimum), N = Non-Magnetic 100% Tin (Sn), M = Non-Magnetic (SnPb). Refer to Ordering Information for additional detail. (2) To complete KEMET part number, insert M for ±20% or K for ±10%. Designates Capacitance tolerance. Higher voltage ratings and tighter ESR may be substituted within the same size at KEMET's option. Voltage substitutions will be marked with the higher voltage rating. Substitutions can include better than series. Part numbers marked in blue font are not recommended for new designs. Please use the T521 series instead. Part numbers marked in orange font are not recommended for new designs. Please contact your KEMET representative for a replacement part. ^ Denotes the large reel (13") is not available. * DF measurement condition is 120 Hz/0.5 V /1.5 V DC Bias rms Refer to Ordering Information for additional detail. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2076_T52X-530 • 3/20/2020 1199 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

KEMET Organic Capacitor (KO-CAP®) T52x/T530 Polymer Electrolytic Capacitors Table 1 – Ratings & Part Number Reference cont. Rated Case Maximum Maximum Voltage Rated Code/ KEMET Part DC Allowable DF ESR MSL Operating VDC at Capacitance Case Number Leakage Ripple Temperature 105°C Size Current Not all µA at 25°C % at 25°C mΩ at 25°C (rms) (See below for Reflow Temp parts are µF KEMET/EIA Maximum/ 120 Hz 100 kHz mA at +45°C °C part options) ≤ 260°C 105°C rated 5 Minutes Maximum Maximum 100 kHz 10 22 B/3528-21 T525B226M010A(1)E080 22 8 80 1,300 3 125 10 33 I/3216-10 T527I336M010ATE200 ^ 33 6* 200 548 3 105 10 33 T/3528-12 T520T336M010A(1)E040 33 8 40 1,600 3 105 10 33 T/3528-12 T520T336M010A(1)E070 33 8 70 1,200 3 105 10 33 T/3528-12 T520T336M010A(1)E080 33 8 80 1,100 3 105 10 33 T/3528-12 T525T336M010A(1)E080 33 8 80 1,100 3 125 10 33 B/3528-21 T520B336M010A(1)E025 33 8 25 2,300 3 105 10 33 B/3528-21 T520B336M010A(1)E035 33 8 35 1,900 3 105 10 33 B/3528-21 T520B336M010A(1)E040 33 8 40 1,800 3 105 10 33 B/3528-21 T520B336M010A(1)E070 33 8 70 1,300 3 105 10 33 B/3528-21 T525B336M010A(1)E080 33 8 80 1,300 3 125 10 33 U/6032-15 T520U336M010A(1)E070 33 8 70 1,400 3 105 10 47 I/3216-10 T527I476M010ATE200 ^ 47 6* 200 548 3 105 10 47 A/3216-18 T520A476M010ATE045 ^ 47 8* 45 1,291 3 105 10 47 B/3528-21 T520B476M010A(1)E035 47 8 35 1,900 3 105 10 47 B/3528-21 T520B476M010A(1)E070 47 8 70 1,300 3 105 10 47 U/6032-15 T520U476M010A(1)E055 47 8 55 1,600 3 105 10 47 C/6032-28 T520C476M010A(1)E100 47 8 100 1,300 3 105 10 68 U/6032-15 T520U686M010A(1)E055 68 8 55 1,600 3 105 10 68 W/7343-15 T520W686M010A(1)E025 68 10 25 2,700 3 105 10 68 W/7343-15 T520W686M010A(1)E040 68 10 40 2,100 3 105 10 68 C/6032-28 T520C686M010A(1)E045 68 8 45 1,900 3 105 10 68 V/7343-19 T520V686M010A(1)E025 68 10 25 2,700 3 105 10 68 V/7343-19 T520V686M010A(1)E040 68 10 40 2,200 3 105 10 68 V/7343-19 T520V686M010A(1)E045 68 10 45 2,000 3 105 10 68 V/7343-19 T520V686M010A(1)E060 68 10 60 1,800 3 105 10 68 V/7343-19 T520V686M010A(1)E100 68 10 100 1,400 3 105 10 68 D/7343-31 T520D686M010A(1)E100 68 10 100 1,500 3 105 10 100 B/3528-21 T520B107M010ATE070 ^ 100 8* 70 1,300 3 105 10 100 C/6032-28 T520C107M010A(1)E025 100 8 25 2,600 3 105 10 100 C/6032-28 T520C107M010A(1)E045 100 8 45 1,900 3 105 10 100 L/6032-19 T520L107M010A(1)E025 100 8 25 2,400 3 105 10 100 W/7343-15 T520W107M010A(1)E040 100 10 40 2,100 3 105 10 100 V/7343-19 T520V107M010A(1)E018 100 10 18 3,200 3 105 10 100 V/7343-19 T520V107M010A(1)E025 100 10 25 2,700 3 105 10 100 V/7343-19 T520V107M010A(1)E045 100 10 45 2,000 3 105 10 100 V/7343-19 T520V107M010A(1)E050 100 10 50 1,900 3 105 10 100 V/7343-19 T520V107M010A(1)E055 100 10 55 1,800 3 105 10 100 D/7343-31 T520D107M010A(1)E018 100 10 18 3,500 3 105 10 100 D/7343-31 T525D107M010A(1)E025 100 10 25 3,000 3 125 10 100 D/7343-31 T520D107M010A(1)E055 100 10 55 2,000 3 105 10 100 D/7343-31 T525D107M010A(1)E055 100 10 55 2,000 3 125 µA at 25°C % at 25°C mΩ at 25°C (See below for mA at +45°C Reflow Temp VDC at 105°C µF KEMET/EIA Maximum/ 120 Hz 100 kHz °C part options) 100 kHz ≤ 260°C 5 Minutes Maximum Maximum Maximum Rated Rated Case Code/ DC Allowable Maximum KEMET Part Number DF ESR MSL Voltage Capacitance Case Size Leakage Ripple Operating Temp Current (1) To complete KEMET part number, insert T = 100% Matte Tin (Sn)-plated, H = Standard Solder coated (SnPb 5% Pb minimum), N = Non-Magnetic 100% Tin (Sn), M = Non-Magnetic (SnPb). Refer to Ordering Information for additional detail. (2) To complete KEMET part number, insert M for ±20% or K for ±10%. Designates Capacitance tolerance. Higher voltage ratings and tighter ESR may be substituted within the same size at KEMET's option. Voltage substitutions will be marked with the higher voltage rating. Substitutions can include better than series. Part numbers marked in blue font are not recommended for new designs. Please use the T521 series instead. Part numbers marked in orange font are not recommended for new designs. Please contact your KEMET representative for a replacement part. ^ Denotes the large reel (13") is not available. * DF measurement condition is 120 Hz/0.5 V /1.5 V DC Bias rms Refer to Ordering Information for additional detail. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2076_T52X-530 • 3/20/2020 2200 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

KEMET Organic Capacitor (KO-CAP®) T52x/T530 Polymer Electrolytic Capacitors Table 1 – Ratings & Part Number Reference cont. Rated Case Maximum Maximum Voltage Rated Code/ KEMET Part DC Allowable DF ESR MSL Operating VDC at Capacitance Case Number Leakage Ripple Temperature 105°C Size Current Not all µA at 25°C % at 25°C mΩ at 25°C (rms) (See below for Reflow Temp parts are µF KEMET/EIA Maximum/ 120 Hz 100 kHz mA at +45°C °C part options) ≤ 260°C 105°C rated 5 Minutes Maximum Maximum 100 kHz 10 100 D/7343-31 T520D107M010A(1)E080 100 10 80 1,700 3 105 10 150 C/6032-28 T520C157M010A(1)E055 150 8 55 1,700 3 105 10 150 V/7343-19 T520V157M010A(1)E018 150 10 18 3,200 3 105 10 150 V/7343-19 T520V157M010A(1)E025 150 10 25 2,700 3 105 10 150 V/7343-19 T520V157M010A(1)E040 150 10 40 2,200 3 105 10 150 D/7343-31 T530D157M010A(1)E005 150 8 5 7,100 3 125 10 150 D/7343-31 T530D157M010A(1)E006 150 8 6 6,500 3 125 10 150 D/7343-31 T530D157M010A(1)E010 150 8 10 5,000 3 125 10 150 D/7343-31 T520D157M010A(1)E015 150 10 15 3,900 3 105 10 150 D/7343-31 T520D157M010A(1)E018 150 10 18 3,500 3 105 10 150 D/7343-31 T520D157M010A(1)E025 150 10 25 3,000 3 105 10 150 D/7343-31 T525D157M010A(1)E025 150 10 25 3,000 3 125 10 150 D/7343-31 T520D157M010A(1)E040 150 10 40 2,400 3 105 10 150 D/7343-31 T520D157M010A(1)E055 150 10 55 2,000 3 105 10 150 D/7343-31 T525D157M010A(1)E055 150 10 55 2,000 3 125 10 150 Y/7343-40 T520Y157M010A(1)E015 150 10 15 4,000 3 105 10 150 Y/7343-40 T520Y157M010A(1)E018 150 10 18 3,700 3 105 10 150 Y/7343-40 T520Y157M010A(1)E025 150 10 25 3,100 3 105 10 220 V/7343-19 T520V227M010A(1)E040 220 10 40 2,200 3 105 10 220 V/7343-19 T520V227M010A(1)E045 220 10 45 2,000 3 105 10 220 V/7343-19 T520V227M010A(1)E025 220 10 25 2,700 3 105 10 220 D/7343-31 T530D227M010A(1)E006 220 8 6 6,500 3 125 10 220 D/7343-31 T530D227M010A(1)E010 220 8 10 5,000 3 125 10 220 D/7343-31 T520D227M010A(1)E018 220 10 18 3,500 3 105 10 220 D/7343-31 T520D227M010A(1)E025 220 10 25 3,000 3 105 10 220 D/7343-31 T525D227M010A(1)E025 220 10 25 3,000 3 125 10 220 D/7343-31 T520D227M010A(1)E040 220 10 40 2,400 3 105 10 220 Y/7343-40 T530Y227M010A(1)E006 220 8 6 6,600 3 125 10 220 Y/7343-40 T520Y227M010A(1)E040 220 10 40 2,500 3 105 10 330 Y/7343-40 T520Y337M010A(1)E015 330 10 15 4,000 3 105 10 330 Y/7343-40 T520Y337M010A(1)E025 330 10 25 3,100 3 105 10 330 Y/7343-40 T520Y337M010A(1)E035 330 10 35 2,600 3 105 10 330 Y/7343-40 T525Y337M010A(1)E035 330 10 35 2,600 3 125 10 330 X/7343-43 T530X337M010A(1)E004 330 8 4 8,200 3 125 10 330 X/7343-43 T530X337M010A(1)E005 330 8 5 7,300 3 125 10 330 X/7343-43 T530X337M010A(1)E006 330 8 6 6,700 3 125 10 330 X/7343-43 T520X337M010A(1)E010 330 10 10 5,000 3 105 10 330 X/7343-43 T530X337M010A(1)E010 330 8 10 5,200 3 125 10 330 X/7343-43 T520X337M010A(1)E025 330 10 25 3,100 3 105 10 330 X/7343-43 T520X337M010A(1)E035 330 10 35 2,700 3 105 10 330 J/7360-15 T523J337M010APE070 330 10 70 2,510 3 85 10 470 J/7360-15 T523J477M010APE070 470 10 70 2,510 3 85 µA at 25°C % at 25°C mΩ at 25°C (See below for mA at +45°C Reflow Temp VDC at 105°C µF KEMET/EIA Maximum/ 120 Hz 100 kHz °C part options) 100 kHz ≤ 260°C 5 Minutes Maximum Maximum Maximum Rated Rated Case Code/ DC Allowable Maximum KEMET Part Number DF ESR MSL Voltage Capacitance Case Size Leakage Ripple Operating Temp Current (1) To complete KEMET part number, insert T = 100% Matte Tin (Sn)-plated, H = Standard Solder coated (SnPb 5% Pb minimum), N = Non-Magnetic 100% Tin (Sn), M = Non-Magnetic (SnPb). Refer to Ordering Information for additional detail. (2) To complete KEMET part number, insert M for ±20% or K for ±10%. Designates Capacitance tolerance. Higher voltage ratings and tighter ESR may be substituted within the same size at KEMET's option. Voltage substitutions will be marked with the higher voltage rating. Substitutions can include better than series. Part numbers marked in blue font are not recommended for new designs. Please use the T521 series instead. Part numbers marked in orange font are not recommended for new designs. Please contact your KEMET representative for a replacement part. ^ Denotes the large reel (13") is not available. * DF measurement condition is 120 Hz/0.5 V /1.5 V DC Bias rms Refer to Ordering Information for additional detail. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2076_T52X-530 • 3/20/2020 2211 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

KEMET Organic Capacitor (KO-CAP®) T52x/T530 Polymer Electrolytic Capacitors Table 1 – Ratings & Part Number Reference cont. Rated Case Maximum Maximum Voltage Rated Code/ KEMET Part DC Allowable DF ESR MSL Operating VDC at Capacitance Case Number Leakage Ripple Temperature 105°C Size Current Not all µA at 25°C % at 25°C mΩ at 25°C (rms) (See below for Reflow Temp parts are µF KEMET/EIA Maximum/ 120 Hz 100 kHz mA at +45°C °C part options) ≤ 260°C 105°C rated 5 Minutes Maximum Maximum 100 kHz 10 820 H/7360-20 T520H827M010A(1)E070 820 20 70 1,200 3 85 10 330 X/7343-43 T520X337M010A(1)E040 330 10 40 2,500 3 105 11 47 Q/7343-12 T520Q476M011A(1)E040 52 10 40 4,500 3 105 12.5 10 T/3528-12 T520T106M12RA(1)E150 12.5 8 150 800 3 105 12.5 15 T/3528-12 T520T156M12RA(1)E080 18.75 8 80 1,100 3 105 12.5 47 T/3528-12 T521T476M12RA(1)E090 58.8 8 90 1,100 3 105 16 10 P/2012-10 T529P106M016AAE150 ^ 80 6* 150 408 3 105 16 10 B/3528-21 T520B106M016A(1)E100 16 8 100 1,100 3 105 16 10 B/3528-21 T521B106M016A(1)E100 16 8 100 1,100 3 125 16 15 B/3528-21 T521B156M016A(1)E090 24 8 90 1,200 3 105 16 22 B/3528-21 T521B226M016A(1)E090 35.2 8 90 1,200 3 105 16 22 C/6032-28 T520C226M016A(1)E080 35.2 8 80 1,400 3 105 16 33 T/3528-12 T521T336M016A(1)E045 52.8 8 45 1,500 3 105 16 33 T/3528-12 T521T336M016A(1)E050 52.8 10 50 1,400 3 105 16 33 B/3528-21 T521B336M016A(1)E070 52.8 8 70 1,300 3 105 16 33 B/3528-21 T521B336M016A(1)E090 52.8 8 90 1,200 3 105 16 33 B/3528-21 T525B336M016A(1)E070 52.8 8 70 1,300 3 125 16 33 B/3528-21 T525B336M016A(1)E090 52.8 8 90 1,200 3 125 16 33 Q/7343-12 T521Q336M016A(1)E040 52.8 10 40 2,500 3 105 16 33 W/7343-15 T520W336M016A(1)E045 52.8 10 45 2,000 3 105 16 33 V/7343-19 T520V336M016A(1)E045 52.8 10 45 2,000 3 105 16 33 V/7343-19 T520V336M016A(1)E060 52.8 10 60 1,800 3 105 16 33 V/7343-19 T520V336M016A(1)E070 52.8 10 70 1,600 3 105 16 47 W/7343-15 T521W476M016A(1)E040 75.2 10 40 2,100 3 105 16 47 W/7343-15 T520W476M016A(1)E045 75.2 10 45 2,000 3 105 16 47 W/7343-15 T521W476M016A(1)E045 75.2 10 45 2,000 3 105 16 47 V/7343-19 T521V476M016A(1)E040 75.2 10 40 2,200 3 105 16 47 V/7343-19 T520V476M016A(1)E045 75.2 10 45 2,000 3 105 16 47 V/7343-19 T521V476M016A(1)E055 75.2 10 55 1,800 3 105 16 47 V/7343-19 T520V476M016A(1)E070 75.2 10 70 1,600 3 105 16 47 V/7343-19 T521V476M016A(1)E070 75.2 10 70 1,600 3 105 16 47 V/7343-19 T521V476M016A(1)E080 75.2 10 80 1,500 3 105 16 47 D/7343-31 T520D476M016A(1)E035 75.2 10 35 2,500 3 105 16 47 D/7343-31 T525D476M016A(1)E035 75.2 10 35 2,500 3 125 16 47 D/7343-31 T521D476M016A(1)E040 75.2 10 40 2,400 3 105 16 47 D/7343-31 T521D476M016A(1)E045 75.2 10 45 2,200 3 105 16 47 D/7343-31 T521D476M016A(1)E055 75.2 10 55 2,000 3 105 16 47 D/7343-31 T525D476M016A(1)E065 75.2 10 65 1,900 3 125 16 47 D/7343-31 T520D476M016A(1)E070 75.2 10 70 1,800 3 105 16 47 D/7343-31 T521D476M016A(1)E070 75.2 10 70 1,800 3 105 16 47 D/7343-31 T521D476M016A(1)E090 75.2 10 90 1,600 3 105 16 68 W/7343-15 T523W686K016APE050 108.8 10 50 2,820 3 105 µA at 25°C % at 25°C mΩ at 25°C (See below for mA at +45°C Reflow Temp VDC at 105°C µF KEMET/EIA Maximum/ 120 Hz 100 kHz °C part options) 100 kHz ≤ 260°C 5 Minutes Maximum Maximum Maximum Rated Rated Case Code/ DC Allowable Maximum KEMET Part Number DF ESR MSL Voltage Capacitance Case Size Leakage Ripple Operating Temp Current (1) To complete KEMET part number, insert T = 100% Matte Tin (Sn)-plated, H = Standard Solder coated (SnPb 5% Pb minimum), N = Non-Magnetic 100% Tin (Sn), M = Non-Magnetic (SnPb). Refer to Ordering Information for additional detail. (2) To complete KEMET part number, insert M for ±20% or K for ±10%. Designates Capacitance tolerance. Higher voltage ratings and tighter ESR may be substituted within the same size at KEMET's option. Voltage substitutions will be marked with the higher voltage rating. Substitutions can include better than series. Part numbers marked in blue font are not recommended for new designs. Please use the T521 series instead. Part numbers marked in orange font are not recommended for new designs. Please contact your KEMET representative for a replacement part. ^ Denotes the large reel (13") is not available. * DF measurement condition is 120 Hz/0.5 V /1.5 V DC Bias rms Refer to Ordering Information for additional detail. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2076_T52X-530 • 3/20/2020 2222 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

KEMET Organic Capacitor (KO-CAP®) T52x/T530 Polymer Electrolytic Capacitors Table 1 – Ratings & Part Number Reference cont. Rated Case Maximum Maximum Voltage Rated Code/ KEMET Part DC Allowable DF ESR MSL Operating VDC at Capacitance Case Number Leakage Ripple Temperature 105°C Size Current Not all µA at 25°C % at 25°C mΩ at 25°C (rms) (See below for Reflow Temp parts are µF KEMET/EIA Maximum/ 120 Hz 100 kHz mA at +45°C °C part options) ≤ 260°C 105°C rated 5 Minutes Maximum Maximum 100 kHz 16 68 W/7343-15 T523W686K016APE070 108.8 10 70 2,376 3 105 16 68 W/7343-15 T523W686K016APE100 108.8 10 100 1,988 3 105 16 68 V/7343-19 T521V686M016A(1)E040 108.8 10 40 2,200 3 105 16 68 V/7343-19 T521V686M016A(1)E050 108.8 10 50 1,900 3 105 16 68 V/7343-19 T521V686M016A(1)E090 108.8 10 90 1,400 3 105 16 68 D/7343-31 T520D686M016A(1)E050 108.8 10 50 2,100 3 105 16 100 W/7343-15 T523W107K016APE050 160 10 50 2,820 3 105 16 100 W/7343-15 T523W107K016APE070 160 10 70 2,376 3 105 16 100 W/7343-15 T523W107K016APE100 160 10 100 1,988 3 105 16 100 V/7343-19 T521V107M016A(1)E040 160 10 40 2,200 3 125 16 100 V/7343-19 T521V107M016A(1)E050 160 10 50 1,900 3 125 16 100 D/7343-31 T521D107M016A(1)E050 160 10 50 2,100 3 105 16 150 W/7343-15 T523W157K016APE050 240 10 50 2,820 3 105 16 150 W/7343-15 T523W157K016APE070 240 10 70 2,376 3 105 16 150 W/7343-15 T523W157K016APE100 240 10 100 1,988 3 105 16 150 D/7343-31 T521D157M016A(1)E050 240 10 50 2,100 3 105 16 150 D/7343-31 T521D157M016A(1)E040 240 10 40 2,400 3 105 16 150 X/7343-43 T530X157M016A(1)E015 240 8 15 4,200 3 125 16 150 X/7343-43 T530X157M016A(1)E025 240 8 25 3,300 3 125 16 150 X/7343-43 T520X157M016A(1)E040 240 10 40 2,500 3 105 16 150 X/7343-43 T530X157M016A(1)E040 240 8 40 2,600 3 125 16 150 X/7343-43 T521X157M016A(1)E080 240 10 80 1,800 3 105 16 220 X/7343-43 T521X227M016A(1)E035 352 10 35 2,700 3 125 16 220 X/7343-43 T521X227M016A(1)E050 352 10 50 2,200 3 125 16 220 H/7360-20 T523H227M016APE070 352 10 70 2,510 3 85 16 220 J/7360-15 T523J227M016APE070 352 10 70 2,510 3 85 16 330 X/7343-43 T521X337M016A(1)E015 528 10 15 4,100 3 125 16 330 X/7343-43 T521X337M016A(1)E025 528 10 25 3,100 3 125 16 330 X/7343-43 T521X337M016A(1)E050 528 10 50 2,200 3 125 16 330 H/7360-20 T523H337M016APE070 528 10 70 2,510 3 85 20 10 B/3528-21 T521B106M020A(1)E100 20 8 100 1,100 3 125 20 15 B/3528-21 T521B156M020A(1)E090 30 10 90 1,200 3 105 20 22 B/3528-21 T521B226M020A(1)E090 44 8 90 1,200 3 105 20 22 W/7343-15 T521W226(2)020A(1)E040 44 10 40 2,100 3 105 20 22 W/7343-15 T521W226(2)020A(1)E055 44 10 55 1,800 3 105 20 22 W/7343-15 T521W226(2)020A(1)E070 44 10 70 1,400 3 105 20 22 V/7343-19 T520V226M020A(1)E040 44 10 40 2,200 3 105 20 22 V/7343-19 T520V226M020A(1)E045 44 10 45 2,000 3 105 20 22 V/7343-19 T520V226M020A(1)E090 44 10 90 1,400 3 105 20 22 V/7343-19 T521V226M020A(1)E090 44 10 90 1,400 3 125 20 33 B/3528-21 T521B336M020ATE090 ^ 132 10* 90 972 3 105 20 47 W/7343-15 T521W476M020A(1)E040 94 9 40 2,100 3 105 µA at 25°C % at 25°C mΩ at 25°C (See below for mA at +45°C Reflow Temp VDC at 105°C µF KEMET/EIA Maximum/ 120 Hz 100 kHz °C part options) 100 kHz ≤ 260°C 5 Minutes Maximum Maximum Maximum Rated Rated Case Code/ DC Allowable Maximum KEMET Part Number DF ESR MSL Voltage Capacitance Case Size Leakage Ripple Operating Temp Current (1) To complete KEMET part number, insert T = 100% Matte Tin (Sn)-plated, H = Standard Solder coated (SnPb 5% Pb minimum), N = Non-Magnetic 100% Tin (Sn), M = Non-Magnetic (SnPb). Refer to Ordering Information for additional detail. (2) To complete KEMET part number, insert M for ±20% or K for ±10%. Designates Capacitance tolerance. Higher voltage ratings and tighter ESR may be substituted within the same size at KEMET's option. Voltage substitutions will be marked with the higher voltage rating. Substitutions can include better than series. Part numbers marked in blue font are not recommended for new designs. Please use the T521 series instead. Part numbers marked in orange font are not recommended for new designs. Please contact your KEMET representative for a replacement part. ^ Denotes the large reel (13") is not available. * DF measurement condition is 120 Hz/0.5 V /1.5 V DC Bias rms Refer to Ordering Information for additional detail. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2076_T52X-530 • 3/20/2020 2233 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

KEMET Organic Capacitor (KO-CAP®) T52x/T530 Polymer Electrolytic Capacitors Table 1 – Ratings & Part Number Reference cont. Rated Case Maximum Maximum Voltage Rated Code/ KEMET Part DC Allowable DF ESR MSL Operating VDC at Capacitance Case Number Leakage Ripple Temperature 105°C Size Current Not all µA at 25°C % at 25°C mΩ at 25°C (rms) (See below for Reflow Temp parts are µF KEMET/EIA Maximum/ 120 Hz 100 kHz mA at +45°C °C part options) ≤ 260°C 105°C rated 5 Minutes Maximum Maximum 100 kHz 20 47 W/7343-15 T521W476K020A(1)E045 94 9 45 2,000 3 105 20 47 V/7343-19 T521V476M020A(1)E090 94 10 90 1,400 3 125 20 47 V/7343-19 T521V476M020A(1)E080 94 10 80 1,500 3 125 20 47 V/7343-19 T521V476M020A(1)E055 94 10 55 1,800 3 125 20 47 D/7343-31 T521D476M020A(1)E055 94 10 55 2,000 3 125 20 47 D/7343-31 T521D476M020A(1)E040 94 10 40 2,400 3 125 20 68 V/7343-19 T521V686M020A(1)E050 136 10 50 1,900 3 105 20 68 V/7343-20 T523V686M020APE100 136 10 100 1,400 4 105 20 100 V/7343-19 T521V107M020A(1)E055 200 10 55 1,800 3 125 20 100 D/7343-31 T521D107(2)020A(1)E055 200 10 55 2,000 3 105 20 150 D/7343-31 T521D157M020A(1)E065 300 10 65 1,900 3 105 20 150 D/7343-31 T521D157M020A(1)E050 300 10 50 2,100 3 105 25 4.7 P/2012-10 T529P475M025AAE300 ^ 35.3 10* 300 289 3 105 25 6.8 T/3528-12 T521T685M025ATE100 ^ 34 8* 100 866 3 105 25 10 S/3216-12 T527S106M025ATE150 ^ 50 10* 150 632 3 105 25 10 M/3528-15 T521M106M025ATE100 ^ 50 10* 100 922 3 105 25 10 B/3528-21 T521B106M025A(1)E100 25 8 100 1,100 3 125 25 10 T/3528-12 T521T106M025A(1)E100 25 8 100 1,000 3 125 25 10 T/3528-12 T521T106M025A(1)E060 25 8 60 1,300 3 125 25 15 B/3528-21 T521B156M025A(1)E100 37.5 8 100 1,100 3 105 25 15 T/3528-12 T527T156M025ATE100 ^ 112.5 10* 100 866 3 105 25 15 V/7343-19 T520V156M025A(1)E090 37.5 10 90 1,400 3 105 25 15 V/7343-19 T521V156M025A(1)E090 37.5 10 90 1,400 3 105 25 15 V/7343-19 T521V156M025A(1)E040 37.5 10 40 2,200 3 105 25 15 D/7343-31 T520D156M025A(1)E060 37.5 10 60 1,900 3 105 25 15 D/7343-31 T520D156M025A(1)E080 37.5 10 80 1,700 3 105 25 22 B/3528-21 T521B226M025A(1)E100 55 8 100 1,100 3 105 25 22 W/7343-15 T521W226M025A(1)E040 55 10 40 2,100 3 105 25 22 W/7343-15 T521W226M025A(1)E070 55 10 70 1,400 3 105 25 22 V/7343-19 T521V226M025A(1)E040 55 10 40 2,200 3 105 25 22 V/7343-19 T521V226M025A(1)E045 55 10 45 2,000 3 105 25 22 V/7343-19 T521V226M025A(1)E060 55 10 60 1,800 3 105 25 22 V/7343-19 T521V226M025A(1)E090 55 10 90 1,400 3 105 25 33 W/7343-15 T523W336M025APE100 82.5 10 100 1,988 4 105 25 33 V/7343-19 T521V336M025A(1)E025 82.5 10 25 2,700 3 105 25 33 V/7343-19 T521V336M025A(1)E060 82.5 10 60 1,800 3 105 25 33 V/7343-19 T521V336M025A(1)E040 82.5 10 40 2,200 3 105 25 33 D/7343-31 T521D336M025A(1)E040 82.5 10 40 2,400 3 105 25 33 D/7343-31 T521D336M025A(1)E060 82.5 10 60 1,900 3 105 25 47 V/7343-20 T523V476M025APE100 117.5 10 100 1,400 4 105 25 47 D/7343-31 T521D476M025A(1)E065 117.5 10 65 1,900 3 105 25 68 D/7343-31 T521D686M025A(1)E070 170 10 70 1,800 3 105 µA at 25°C % at 25°C mΩ at 25°C (See below for mA at +45°C Reflow Temp VDC at 105°C µF KEMET/EIA Maximum/ 120 Hz 100 kHz °C part options) 100 kHz ≤ 260°C 5 Minutes Maximum Maximum Maximum Rated Rated Case Code/ DC Allowable Maximum KEMET Part Number DF ESR MSL Voltage Capacitance Case Size Leakage Ripple Operating Temp Current (1) To complete KEMET part number, insert T = 100% Matte Tin (Sn)-plated, H = Standard Solder coated (SnPb 5% Pb minimum), N = Non-Magnetic 100% Tin (Sn), M = Non-Magnetic (SnPb). Refer to Ordering Information for additional detail. (2) To complete KEMET part number, insert M for ±20% or K for ±10%. Designates Capacitance tolerance. Higher voltage ratings and tighter ESR may be substituted within the same size at KEMET's option. Voltage substitutions will be marked with the higher voltage rating. Substitutions can include better than series. Part numbers marked in blue font are not recommended for new designs. Please use the T521 series instead. Part numbers marked in orange font are not recommended for new designs. Please contact your KEMET representative for a replacement part. ^ Denotes the large reel (13") is not available. * DF measurement condition is 120 Hz/0.5 V /1.5 V DC Bias rms Refer to Ordering Information for additional detail. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2076_T52X-530 • 3/20/2020 2244 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

KEMET Organic Capacitor (KO-CAP®) T52x/T530 Polymer Electrolytic Capacitors Table 1 – Ratings & Part Number Reference cont. Rated Case Maximum Maximum Voltage Rated Code/ KEMET Part DC Allowable DF ESR MSL Operating VDC at Capacitance Case Number Leakage Ripple Temperature 105°C Size Current Not all µA at 25°C % at 25°C mΩ at 25°C (rms) (See below for Reflow Temp parts are µF KEMET/EIA Maximum/ 120 Hz 100 kHz mA at +45°C °C part options) ≤ 260°C 105°C rated 5 Minutes Maximum Maximum 100 kHz 25 100 D/7343-31 T521D107M025A(1)E040 250 10 40 2,400 3 105 25 100 D/7343-31 T521D107M025A(1)E050 250 10 50 2,100 3 105 25 100 D/7343-31 T521D107M025A(1)E060 250 10 60 1,900 3 105 25 100 X/7343-43 T521X107M025A(1)E030 250 10 30 2,900 3 105 25 100 X/7343-43 T521X107M025A(1)E060 250 10 60 2,000 3 105 35 3.3 B/3528-21 T521B335M035A(1)E150 11.6 8 150 900 3 105 35 3.3 B/3528-21 T521B335M035A(1)E200 11.6 8 200 800 3 105 35 4.7 B/3528-21 T521B475M035A(1)E150 16.5 8 150 900 3 105 35 4.7 B/3528-21 T521B475M035A(1)E200 16.5 8 200 800 3 105 35 6.8 T/3528-12 T521T685M035APE090 23.8 10 90 1,100 3 125 35 6.8 B/3528-21 T521B685M035A(1)E150 23.8 8 150 900 3 105 35 6.8 B/3528-21 T521B685M035A(1)E200 23.8 8 200 800 3 105 35 10 B/3528-21 T521B106M035A(1)E150 35 8 150 900 3 105 35 10 B/3528-21 T521B106M035A(1)E200 35 8 200 800 3 105 35 10 V/7343-19 T521V106M035A(1)E120 35 10 120 1,200 3 125 35 15 V/7343-19 T521V156M035A(1)E100 52.5 10 100 1,400 3 125 35 15 V/7343-19 T521V156M035A(1)E125 52.5 10 125 1,200 3 125 35 22 W/7343-15 T523W226M035APE100 77 10 100 1,988 4 105 35 22 D/7343-31 T521D226M035A(1)E040 77 10 40 2,400 3 125 35 22 D/7343-31 T521D226M035A(1)E060 77 10 60 1,900 3 125 35 33 V/7343-20 T523V336M035APE100 115.5 10 100 1,400 4 105 35 33 D/7343-31 T521D336M035A(1)E065 115.5 10 65 1,900 3 125 35 47 V/7343-20 T523V476M035APE100 164.5 10 100 1,400 4 105 35 47 X/7343-43 T521X476M035A(1)E030 164.5 10 30 2,900 3 125 35 47 X/7343-43 T521X476M035A(1)E070 164.5 10 70 1,900 3 125 35 47 W/7343-15 T523W476M035APE090 164.5 10 90 2,100 3 85 35 47 W/7343-15 T523W476M035APE100 164.5 10 100 1,988 3 85 50 0.68 B/3528-21 T521B684M050A(1)E200 3.4 8 200 800 3 105 50 1 B/3528-21 T521B105M050A(1)E200 5 8 200 800 3 105 50 1.5 B/3528-21 T521B155M050A(1)E200 7.5 8 200 800 3 105 50 2.2 B/3528-21 T521B225M050A(1)E200 11 8 200 800 3 105 50 3.3 B/3528-21 T521B335M050A(1)E200 16.5 8 200 800 3 105 50 5.6 D/7343-31 T521D565M050A(1)E070 28 10 70 1,800 3 125 50 5.6 D/7343-31 T521D565M050A(1)E090 28 10 90 1,600 3 125 50 5.6 V/7343-19 T521V565M050A(1)E070 28 10 70 1,800 3 125 50 5.6 V/7343-19 T521V565M050A(1)E090 28 10 90 1,600 3 125 50 6.8 D/7343-31 T521D685M050A(1)E070 34 10 70 1,800 3 125 50 6.8 D/7343-31 T521D685M050A(1)E090 34 10 90 1,600 3 125 50 6.8 V/7343-19 T521V685M050A(1)E070 34 10 70 1,800 3 125 50 6.8 V/7343-19 T521V685M050A(1)E090 34 10 90 1,600 3 125 50 10 D/7343-31 T521D106M050A(1)E090 50 10 90 1,600 3 125 50 10 D/7343-31 T521D106M050A(1)E120 50 10 120 1,369 3 125 µA at 25°C % at 25°C mΩ at 25°C (See below for mA at +45°C Reflow Temp VDC at 105°C µF KEMET/EIA Maximum/ 120 Hz 100 kHz °C part options) 100 kHz ≤ 260°C 5 Minutes Maximum Maximum Maximum Rated Rated Case Code/ DC Allowable Maximum KEMET Part Number DF ESR MSL Voltage Capacitance Case Size Leakage Ripple Operating Temp Current (1) To complete KEMET part number, insert T = 100% Matte Tin (Sn)-plated, H = Standard Solder coated (SnPb 5% Pb minimum), N = Non-Magnetic 100% Tin (Sn), M = Non-Magnetic (SnPb). Refer to Ordering Information for additional detail. (2) To complete KEMET part number, insert M for ±20% or K for ±10%. Designates Capacitance tolerance. Higher voltage ratings and tighter ESR may be substituted within the same size at KEMET's option. Voltage substitutions will be marked with the higher voltage rating. Substitutions can include better than series. Part numbers marked in blue font are not recommended for new designs. Please use the T521 series instead. Part numbers marked in orange font are not recommended for new designs. Please contact your KEMET representative for a replacement part. ^ Denotes the large reel (13") is not available. * DF measurement condition is 120 Hz/0.5 V /1.5 V DC Bias rms Refer to Ordering Information for additional detail. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2076_T52X-530 • 3/20/2020 2255 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

KEMET Organic Capacitor (KO-CAP®) T52x/T530 Polymer Electrolytic Capacitors Table 1 – Ratings & Part Number Reference cont. Rated Case Maximum Maximum Voltage Rated Code/ KEMET Part DC Allowable DF ESR MSL Operating VDC at Capacitance Case Number Leakage Ripple Temperature 105°C Size Current Not all µA at 25°C % at 25°C mΩ at 25°C (rms) (See below for Reflow Temp parts are µF KEMET/EIA Maximum/ 120 Hz 100 kHz mA at +45°C °C part options) ≤ 260°C 105°C rated 5 Minutes Maximum Maximum 100 kHz 50 10 V/7343-19 T521V106M050A(1)E090 50 10 90 1,600 3 125 50 18 D/7343-31 T521D186M050A(1)E090 90 10 90 1,600 3 125 50 18 X/7343-43 T521X186M050A(1)E070 90 10 70 1,900 3 125 50 18 X/7343-43 T521X186M050A(1)E050 90 10 50 2,200 3 125 50 18 X/7343-43 T521X186M050A(1)E035 90 10 35 2,700 3 125 50 22 D/7343-31 T521D226M050A(1)E090 110 10 90 1,600 3 125 50 22 X/7343-43 T521X226M050A(1)E075 110 10 75 1,815 3 125 50 22 X/7343-43 T521X226M050A(1)E050 110 10 50 2,200 3 125 50 33 X/7343-43 T521X336M050A(1)E075 165 10 75 1,815 3 125 50 33 X/7343-43 T521X336M050A(1)E050 165 10 50 2,200 3 125 63 0.68 B/3528-21 T521B684M063A(1)E200 4.3 8 200 800 3 105 63 1 B/3528-21 T521B105M063A(1)E200 6.3 8 200 800 3 105 63 1.5 B/3528-21 T521B155M063A(1)E200 9.5 8 200 800 3 105 63 4.7 C/6032-28 T521C475M063A(1)E200 29.6 6 200 900 3 105 63 4.7 D/7343-31 T521D475M063A(1)E300 29.61 10 300 900 3 125 63 4.7 D/7343-31 T521D475M063A(1)E075 29.6 10 75 1,700 3 125 63 6.8 X/7343-43 T521D685M063A(1)E075 42.8 10 75 1,700 3 125 63 10 X/7343-43 T521X106M063A(1)E050 63 10 50 2,200 3 125 63 15 X/7343-43 T521X156M063A(1)E035 94.5 10 35 2,600 3 125 63 15 X/7343-43 T521X156M063A(1)E150 94.5 10 150 1,300 3 125 63 22 X/7343-43 T521X226M063A(1)E075 138.6 10 75 1,815 3 125 75 4.7 D/7343-31 T521D475M075A(1)E075 35.3 10 75 1,700 3 125 75 10 X/7343-43 T521X106M075A(1)E050 75 10 50 2,200 3 125 75 15 X/7343-43 T521X156M075A(1)E035 112.5 10 35 2,600 3 125 µA at 25°C % at 25°C mΩ at 25°C (See below for mA at +45°C Reflow Temp VDC at 105°C µF KEMET/EIA Maximum/ 120 Hz 100 kHz °C part options) 100 kHz ≤ 260°C 5 Minutes Maximum Maximum Maximum Rated Rated Case Code/ DC Allowable Maximum KEMET Part Number DF ESR MSL Voltage Capacitance Case Size Leakage Ripple Operating Temp Current (1) To complete KEMET part number, insert T = 100% Matte Tin (Sn)-plated, H = Standard Solder coated (SnPb 5% Pb minimum), N = Non-Magnetic 100% Tin (Sn), M = Non-Magnetic (SnPb). Refer to Ordering Information for additional detail. (2) To complete KEMET part number, insert M for ±20% or K for ±10%. Designates Capacitance tolerance. Higher voltage ratings and tighter ESR may be substituted within the same size at KEMET's option. Voltage substitutions will be marked with the higher voltage rating. Substitutions can include better than series. Part numbers marked in blue font are not recommended for new designs. Please use the T521 series instead. Part numbers marked in orange font are not recommended for new designs. Please contact your KEMET representative for a replacement part. ^ Denotes the large reel (13") is not available. * DF measurement condition is 120 Hz/0.5 V /1.5 V DC Bias rms Refer to Ordering Information for additional detail. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2076_T52X-530 • 3/20/2020 2266 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

KEMET Organic Capacitor (KO-CAP®) T52x/T530 Polymer Electrolytic Capacitors Derating Guidelines For Parts with Maximum Operational Temperature of 125°C For Parts with Maximum Operational Temperature of 85°C 95% 100% 90% 95% Rated Voltage 85% 90% e g Volta7850%% Recommended Application Voltage oltage 8805%% Recommended Application Voltage ed 70% d V 75% Rat65% Rate 70% % % 65% 60% 60% 60% 55% 55% 50% 50% −55 25 85 105 125 −55 25 85 Temperature°C Temperature °C For Parts with Maximum Operational Temperature of 105°C 95% 90% 85% Recommended Application Voltage e g 80% a t ol 75% Recommended Application Voltage for series: T523, T527, T529 V ed 70% t a R 65% % 60% 55% 50% -55 25 85 105 Temperature °C Recommended Application Voltage KO-CAPs are solid state capacitors that demonstrate no wearout mechanism when operated within their recommended guidelines. While the KO-CAP can be operated at full rated voltage, most circuit designers seek a minimum level of assurance in long term reliability, which should be demonstrated with data. A voltage derating can provide the desired level of demonstrated reliability based on industry accepted acceleration models. Since most applications do require long term reliability, KEMET recommends that designers consider a voltage derating, according to the graphic above, for the maximum steady state voltage. Voltage Maximum Recommended Rating Steady State Voltage −55°C to 105°C 105°C to 125°C 75 V ≤ V 90% of V 60% of V R R R V = Rated Voltage R © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2076_T52X-530 • 3/20/2020 2277 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

KEMET Organic Capacitor (KO-CAP®) T52x/T530 Polymer Electrolytic Capacitors Ripple Current/Ripple Voltage Permissible AC ripple voltage and current are related to equivalent series resistance (ESR) and the power dissipation capabilities of the device. Permissible AC ripple voltage, which may be applied is limited by two criteria: a. The positive peak AC voltage plus the DC bias voltage, if any, must not exceed the DC voltage rating of the capacitor. b. The negative peak AC voltage, in combination with bias voltage, if any, must not exceed the allowable limits specified for reverse voltage. The maximum power dissipation must be reduced with increasing environmental operating temperatures. Refer to the table below for temperature compensation requirements. Temperature Compensation Multipliers for Maximum Ripple Current T ≤ 45°C 45° C < T ≤ 85°C 85°C < T ≤ 125°C 1.00 0.70 0.25 T= Environmental Temperature Surge Voltage Surge voltage is the maximum voltage (peak value) which may be applied to the capacitor. The surge voltage must not be applied for periodic charging and discharging in course of normal operation and cannot be part of the application voltage. Surge voltage capability is demonstrated by application of 1,000 cycles at operating temperature. The parts are charged through a 33 Ohm resistor for 30 seconds and then discharged though a 33 Ohm resistor for each cycle. Rated Voltage (V) Surge Voltage (V) Category Voltage (V) Category Surge Voltage (V) –55ºC to 105ºC up to 125ºC 2.5 3.3 1.7 2.2 6.3 8.2 4.2 5.5 10 13.0 6.7 8.7 16 20.8 10.7 13.9 20 26.0 13.4 17.4 25 32.5 16.8 21.8 35 45.5 23.5 30.5 50 65.0 33.5 43.6 Reverse Voltage Polymer electrolytic capacitors are polar devices and may be permanently damaged or destroyed if connected in the wrong polarity. These devices will withstand a small degree of transient voltage reversal for short periods as shown in the below table. Temperature Permissible Transient Reverse Voltage 25°C 15% of Rated Voltage 55°C 10% of Rated Voltage 85°C 5% of Rated Voltage 105°C 3% of Rated Voltage 125°C* 1% of Rated Voltage *For series rated to 125°C © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2076_T52X-530 • 3/20/2020 2288 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

KEMET Organic Capacitor (KO-CAP®) T52x/T530 Polymer Electrolytic Capacitors Table 2 – Land Dimensions/Courtyard T520/T521/T525/T530 Metric Density Level A: Density Level B: Density Level C: KEMET Size Maximum (Most) Land Median (Nominal) Land Minimum (Least) Land Code Protrusion (mm) Protrusion (mm) Protrusion (mm) Case EIA W L S V1 V2 W L S V1 V2 W L S V1 V2 A 3216–18 1.35 2.20 0.62 6.02 2.80 1.23 1.80 0.82 4.92 2.30 1.13 1.42 0.98 4.06 2.04 B 3528–21 2.35 2.21 0.92 6.32 4.00 2.23 1.80 1.12 5.22 3.50 2.13 1.42 1.28 4.36 3.24 C 6032–28 2.35 2.77 2.37 8.92 4.50 2.23 2.37 2.57 7.82 4.00 2.13 1.99 2.73 6.96 3.74 D 7343–31 2.55 2.77 3.67 10.22 5.60 2.43 2.37 3.87 9.12 5.10 2.33 1.99 4.03 8.26 4.84 H 7360-20 4.25 2.77 3.67 10.22 7.30 4.13 2.37 3.87 9.12 6.80 4.03 1.99 4.03 8.26 6.54 L 6032-19 2.35 2.77 2.37 8.92 4.50 2.23 2.37 2.57 7.82 4.00 2.13 1.99 2.73 6.96 3.74 M 3528-15 2.35 2.20 0.92 6.32 4.00 2.23 1.80 1.12 5.22 3.50 2.13 1.42 1.28 4.36 3.24 Q 7343-12 2.55 2.77 3.67 10.22 5.60 2.43 2.37 3.87 9.12 5.10 2.33 1.99 4.03 8.26 4.84 T 3528–12 2.35 2.20 0.92 6.32 4.00 2.23 1.80 1.12 5.22 3.50 2.13 1.42 1.28 4.36 3.24 U 6032–15 2.35 2.77 2.37 8.92 4.50 2.23 2.37 2.57 7.82 4.00 2.13 1.99 2.73 6.96 3.74 V 7343–21 2.55 2.77 3.67 10.22 5.60 2.43 2.37 3.87 9.12 5.10 2.33 1.99 4.03 8.26 4.84 W 7343–15 2.55 2.77 3.67 10.22 5.60 2.43 2.37 3.87 9.12 5.10 2.33 1.99 4.03 8.26 4.84 X1 7343–43 2.55 2.77 3.67 10.22 5.60 2.43 2.37 3.87 9.12 5.10 2.33 1.99 4.03 8.26 4.84 Y1 7343–40 2.55 2.77 3.67 10.22 5.60 2.43 2.37 3.87 9.12 5.10 2.33 1.99 4.03 8.26 4.84 Density Level A: For low-density product applications. Recommended for wave solder applications and provides a wider process window for reflow solder processes. Density Level B: For products with a moderate level of component density. Provides a robust solder attachment condition for reflow solder processes. Density Level C: For high component density product applications. Before adapting the minimum land pattern variations the user should perform qualification testing based on the conditions outlined in IPC standard 7351 (IPC–7351). ¹ Height of these chips may create problems in wave soldering. 2 Land pattern geometry is too small for silkscreen outline. V1 L L W W V2 S Grid Placement Courtyard © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2076_T52X-530 • 3/20/2020 2299 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

KEMET Organic Capacitor (KO-CAP®) T52x/T530 Polymer Electrolytic Capacitors Table 2 – Land Dimensions/Courtyard cont. T523 Metric Maximum (Most) Land Median (Nominal) Land Minimum (Least) Land KEMET Size Protrusion (mm) Protrusion (mm) Protrusion (mm) Code Case EIA W L S V1 V2 W L S V1 V2 W L S V1 V2 W 7343–15 2.55 2.77 3.67 10.22 5.60 2.43 2.37 3.87 9.12 5.10 2.33 1.99 4.03 8.26 4.84 V 7343-20 2.55 2.77 3.67 10.22 5.60 2.43 2.37 3.87 9.12 5.10 2.33 1.99 4.03 8.26 4.84 G 7360-12 4.60 3.07 3.07 10.22 7.30 4.48 2.67 3.27 9.12 6.80 4.38 2.29 3.43 8.26 6.54 J 7360-15 4.60 3.07 3.07 10.22 7.30 4.48 2.67 3.27 9.12 6.80 4.38 2.29 3.43 8.26 6.54 H 7360-20 4.60 3.07 3.07 10.22 7.30 4.48 2.67 3.27 9.12 6.80 4.38 2.29 3.43 8.26 6.54 V1 L L W W V2 S Grid Placement Courtyard T527 / T529 Metric Dimensions (mm) KEMET Size Code Minimum – Maximum Case EIA G Z X Y I 3216-10 1.00 – 1.65 3.25 – 3.80 1.10 – 1.30 0.80 – 1.40 S 3216-12 1.00 – 1.65 3.25 – 3.80 1.10 – 1.30 0.80 – 1.40 P 2012-10 0.40 – 1.05 2.05 – 2.60 0.80 – 1.00 0.50 – 1.10 (JEITA RC-2371 is recommended for reference) X X Y G Y Z © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2076_T52X-530 • 3/20/2020 3300 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

KEMET Organic Capacitor (KO-CAP®) T52x/T530 Polymer Electrolytic Capacitors Soldering Process The KEMET families of surface mount capacitors are Profile Feature SnPb Assembly Pb-Free Assembly compatible with wave (single or dual), convection, IR, Preheat/Soak or vapor phase reflow techniques. Preheating of these Temperature Minimum (T ) 100°C 150°C components is recommended to avoid extreme thermal Smin Temperature Maximum (T ) 150°C 200°C stress. KEMET's recommended profile conditions for Smax Time (t) from T to T ) 60 – 120 seconds 60 – 120 seconds convection and IR reflow reflect the profile conditions of the s smin smax Ramp-up Rate (T to T) 3°C/seconds maximum 3°C/seconds maximum IPC/J–STD–020D standard for moisture sensitivity testing. L P Liquidous Temperature (T) 183°C 217°C The devices can safely withstand a maximum of three reflow L Time Above Liquidous (t) 60 – 150 seconds 60 – 150 seconds passes at these conditions. L 220°C* 250°C* Peak Temperature (T) P 235°C** 260°C** Time within 5°C of Maximum Please note that although the X/7343–43 case size can Peak Temperature (t) 20 seconds maximum 30 seconds maximum P withstand wave soldering, the tall profile (4.3 mm maximum) Ramp-down Rate (T to T) 6°C/seconds maximum 6°C/seconds maximum P L dictates care in wave process development. Time 25°C to Peak 6 minutes maximum 8 minutes maximum Temperature Note: All temperatures refer to the center of the package, measured on the Hand soldering should be performed with care due to the package body surface that is facing up during assembly reflow. difficulty in process control. If performed, care should be * For Case Size height > 2.5 mm taken to avoid contact of the soldering iron to the molded ** For Case Size height ≤ 2.5 mm case. The iron should be used to heat the solder pad, applying solder between the pad and the termination, until T P t reflow occurs. Once reflow occurs, the iron should be Maximum Ramp-up Rate = 3°C/second P Maximum Ramp-down Rate = 6°C/second removed immediately. “Wiping” the edges of a chip and T heating the top surface is not recommended. re L tL u rat Tsmax e p m T e smin t T s 25 25°C to Peak Time Storage All KO-CAP Series are shipped in moisture barrier bags (MBBs) with desiccant and humidity indicator card (HIC). These parts are classified as MSL3 (Moisture Sensitivity Level 3) per IPC/JEDEC J–STD–020 and packaged per IPC/JEDEC J–STD–033. MSL3 specifies a floor time of 168H at 30°C maximum temperature and 60% relative humidity. Unused capacitors should be sealed in a MBB with fresh desiccant. The calculated shelf life in a sealed bag would be 12 months from a bag seal date in a storage environment of < 40°C and humidity < 90% RH. It should be 24 months from a bag seal date in a storage environment of < 30°C and humidity < 70% RH. If baking is required, refer to IPC/JEDEC J–STD–033 for bake procedure. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2076_T52X-530 • 3/20/2020 3311 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

KEMET Organic Capacitor (KO-CAP®) T52x/T530 Polymer Electrolytic Capacitors Construction T520/T521/T525/T530 Molded Epoxy Polarity Stripe (+) Detailed Cross Section Case Silver Paint Polarity (Fourth Layer) Bevel (+) Wire Leadframe (− Cathode) Wire Weld (to attach wire) Carbon (Third Layer) Silver Adhesive TaO Dielectric 2 5 Molded Epoxy Leadframe Polymer (First Layer) Case (+ Anode) (Second Layer) Tantalum T523 Polarity Stripe (+) Detailed Cross Section Molded Epoxy Carbon Silver Paint Case (Third Layer) (Fourth Layer) Polymer Tantalum Wire (Second Layer) TaO Dielectric Tantalum 2 5 Leadframe (First Layer) Tantalum Wire Leadframe Weld (+ Anode) (- Cathode) Spacer (to attach wire) © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2076_T52X-530 • 3/20/2020 3322 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

KEMET Organic Capacitor (KO-CAP®) T52x/T530 Polymer Electrolytic Capacitors Construction cont. T527 Polarity Stripe (+) Detailed Cross Section Carbon (Third Layer) Silver Paint (Fourth Layer) Molded Epoxy Case Wire Wire Polymer Spacer (Second Layer) TaO Dielectric 2 5 Tantalum (First Layer) Leadframe Silver Weld Leadframe (− Cathode) Adhesive (to attach wire) (+ Anode) T529 Polarity Stripe (+) Detailed Cross Section Molded Epoxy Carbon Case (Third Layer) Silver Paint (Fourth Layer) Wire (− Cathode) Wire Polymer (Second Layer) Spacer TaO Dielectric 2 5 (First Layer) Tantalum (+ Anode) Weld Substrate Silver Adhesive (to attach wire) © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2076_T52X-530 • 3/20/2020 3333 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

KEMET Organic Capacitor (KO-CAP®) T52x/T530 Polymer Electrolytic Capacitors Capacitor Marking T520/T521/T523/T525/T530 (KO) KEMET Polarity Date Code* Organic Indicator (+) Polymer 1st digit = Last number of Year 6 = 2016 7 = 2017 Picofarad 8 = 2018 Code 9 = 2019 0 = 2020 Rated KEMET 2nd and 3rd digit = Week of the 01 = 1st week of the Year to Voltage ID Year 52 = 52nd week of the Year Date Code* * 011 = 11th week of 2020 T520A/T527 Polarity Code e g J A E Indicator (+) Rated Voltage 2.5 V 4 V 6.3 V 10 V 25 V Date Code A E7 J7 N7 Code Capacitance 10 15 22 33 Voltage and Code S7 w A8 J8 Capacitance Code Capacitance 47 68 100 220 Date Code* Year Jan Feb Mar Apr May Jun Jul Aug Sep Oct Nov Dec 2017 A B C D E F G H J K L M 2018 N P Q R S T U V W X Y Z 2019 a b c d e f g h j k l m 2020 n p q r s t u v w x y z © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2076_T52X-530 • 3/20/2020 3344 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

KEMET Organic Capacitor (KO-CAP®) T52x/T530 Polymer Electrolytic Capacitors Capacitor Marking cont. T520B/T521B/T520T Code e g J A C D E Rated Voltage 2.5 V 4 V 6.3 V 10 V 16 V 20 V 25 V Polarity Indicator (+) Code E7 J7 N7 A8 Voltage and ID Code Capacitance 15 22 33 100 Capacitance Code Code E8 J8 N8 S8 Date Code Capacitance 150 220 330 470 T529 Code J A C E Polarity Rated Voltage 6.3 V 10 V 16 V 25 V Indicator (+) Date Code S a j s Code Capacitance (µF) 4.7 10 22 47 Voltage and Capacitance Code Date Code* Year Jan Feb Mar Apr May Jun Jul Aug Sep Oct Nov Dec 2017 A B C D E F G H J K L M 2018 N P Q R S T U V W X Y Z 2019 a b c d e f g h j k l m 2020 n p q r s t u v w x y z © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2076_T52X-530 • 3/20/2020 3355 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

KEMET Organic Capacitor (KO-CAP®) T52x/T530 Polymer Electrolytic Capacitors Tape & Reel Packaging Information KEMET’s molded chip capacitor families are packaged in 8 and 12 mm plastic tape on 7" and 13" reels in accordance with EIA Standard 481: Embossed Carrier Taping of Surface Mount Components for Automatic Handling. This packaging system is compatible with all tape-fed automatic pick-and-place systems. Right hand orientation only Embossed carrier (+) (−) Embossment Top tape thickness 0.10 mm (0.004”) 8 mm (0.315”) or 180 mm (7.0”) or maximum thickness 12 mm (0.472”) 330 mm (13.”) Table 3 – Packaging Quantity Tape Width Case Code 7" Reel* 13" Reel* (mm) KEMET EIA P 2012-10 8 3,000 N/A R 2012-12 8 2,500 10,000 I 3216-10 8 3,000 N/A S 3216-12 8 3,000 N/A A 3216-18 8 2,000 N/A T 3528-12 8 3,000 10,000 M 3528-15 8 2,500 8,000 B 3528-21 8 2,000 8,000 U 6032-15 12 1,000 5,000 L 6032-19 12 1,000 3,000 C 6032-28 12 500 3,000 Q 7343-12 12 1,000 3,000 W 7343-15 12 1,000 3,000 Z 7343-17 12 1,000 3,000 V 7343-19 12 1,000 3,000 D 7343-31 12 500 2,500 Y 7343-40 12 500 2,000 X 7343-43 12 500 2,000 J 7360-15 12 1,000 3,000 H 7360-20 12 1,000 3,000 O 7360-43 12 250 1,000 * No C-Spec required for 7" reel packaging. C-7280 required for 13" reel packaging. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2076_T52X-530 • 3/20/2020 3366 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

KEMET Organic Capacitor (KO-CAP®) T52x/T530 Polymer Electrolytic Capacitors Figure 1 – Embossed (Plastic) Carrier Tape Dimensions T P 2 T2 ØD0 P0 t(o1l0e rpaintcchee osn c tuampuel a±0ti.v2e mm) E1 A 0 F K 0 W B1 B0 E2 S P 1 1 T1 Center Lines of Cavity ØD Embossment 1 For cavity size, Cover Tape see Note 1, Table 4 B is for tape feeder reference only, 1 including draft concentric about B0. User Direction of Unreeling Table 4 – Embossed (Plastic) Carrier Tape Dimensions Metric will govern Constant Dimensions — Millimeters (Inches) D Minimum R Reference S Minimum T Tape Size D 1 E P P 1 T Maximum 1 0 Note 1 1 0 2 Note 2 Note 3 Maximum 1.0 25.0 8 mm (0.039) (0.984) 1.5 +0.10/−0.0 1.75 ±0.10 4.0 ±0.10 2.0 ±0.05 0.600 0.600 0.100 (0.059 +0.004/−0.0) (0.069 ±0.004) (0.157 ±0.004) (0.079 ±0.002) (0.024) (0.024) (0.004) 1.5 30 12 mm (0.059) (1.181) Variable Dimensions — Millimeters (Inches) B Maximum Tape Size Pitch 1 E Minimum F P T Maximum W Maximum A, B & K Note 4 2 1 2 0 0 0 4.35 6.25 3.5 ±0.05 2.0 ±0.05 or 4.0 ±0.10 2.5 8.3 8 mm Single (4 mm) (0.171) (0.246) (0.138 ±0.002) (0.079 ±0.002 or 0.157 ±0.004) (0.098) (0.327) Single (4 mm) 2.0 ±0.05 (0.079 ±0.002) or Note 5 8.2 10.25 5.5 ±0.05 4.6 12.3 12 mm and Double 4.0 ±0.10 (0.157 ±0.004) or (0.323) (0.404) (0.217 ±0.002) (0.181) (0.484) (8 mm) 8.0 ±0.10 (0.315 ±0.004) 1. The embossment hole location shall be measured from the sprocket hole controlling the location of the embossment. Dimensions of embossment location and hole location shall be applied independent of each other. 2. The tape, with or without components, shall pass around R without damage (see Figure 4). 3. If S < 1.0 mm, there may not be enough area for cover tape to be properly applied (see EIA Standard 481–D, paragraph 4.3, section b). 1 4. B dimension is a reference dimension for tape feeder clearance only. 1 5. The cavity defi ned by A, B and K shall surround the component with suffi cient clearance that: 0 0 0 (a) the component does not protrude above the top surface of the carrier tape. (b) the component can be removed from the cavity in a vertical direction without mechanical restriction, after the top cover tape has been removed. (c) rotation of the component is limited to 20° maximum for 8 and 12 mm tapes (see Figure 2). (d) lateral movement of the component is restricted to 0.5 mm maximum for 8 mm and 12 mm wide tape (see Figure 3). (e) see Addendum in EIA Standard 481–D for standards relating to more precise taping requirements. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2076_T52X-530 • 3/20/2020 3377 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

KEMET Organic Capacitor (KO-CAP®) T52x/T530 Polymer Electrolytic Capacitors Packaging Information Performance Notes 1. Cover Tape Break Force: 1.0 Kg minimum. 2. Cover Tape Peel Strength: The total peel strength of the cover tape from the carrier tape shall be: Tape Width Peel Strength 8 mm 0.1 to 1.0 Newton (10 to 100 gf) 12 mm 0.1 to 1.3 Newton (10 to 130 gf) The direction of the pull shall be opposite the direction of the carrier tape travel. The pull angle of the carrier tape shall be 165° to 180° from the plane of the carrier tape. During peeling, the carrier and/or cover tape shall be pulled at a velocity of 300 ±10 mm/minute. 3. Labeling: Bar code labeling (standard or custom) shall be on the side of the reel opposite the sprocket holes. Refer to EIA Standards 556 and 624. Figure 2 – Maximum Component Rotation ° T Maximum Component Rotation Maximum Component Rotation Top View Side View Typical Pocket Centerline Tape Maximum ° Width (mm) Rotation ( °) s T 8, 12 20 Bo Tape Maximum Width (mm) Rotation ( °) S 8, 12 20 Typical Component Centerline Ao Figure 3 – Maximum Lateral Movement Figure 4 – Bending Radius 8 mm & 12 mm Tape Embossed Punched Carrier Carrier 0.5 mm maximum 0.5 mm maximum Bending R R Radius © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2076_T52X-530 • 3/20/2020 3388 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

KEMET Organic Capacitor (KO-CAP®) T52x/T530 Polymer Electrolytic Capacitors Figure 5 – Reel Dimensions W Full Radius, (Includes Access Hole at 3 See Note Slot Location flange distortion (Ø 40 mm minimum) at outer edge) W (Measured at hub) 2 A D (See Note) N C (Arbor hole W (Measured at hub) diameter) 1 If present, tape slot in core for tape start: 2.5 mm minimum width x 10.0 mm minimum depth B (see Note) Note: Drive spokes optional; if used, dimensions B and D shall apply. Table 5 – Reel Dimensions Metric will govern Constant Dimensions — Millimeters (Inches) Tape Size A B Minimum C D Minimum 178 ±0.20 8 mm (7.008 ±0.008) 1.5 13.0 +0.5/−0.2 20.2 or (0.059) (0.521 +0.02/−0.008) (0.795) 12 mm 330 ±0.20 (13.000 ±0.008) Variable Dimensions — Millimeters (Inches) Tape Size N Minimum W W Maximum W 1 2 3 8.4 +1.5/−0.0 14.4 8 mm 50 (0.331 +0.059/−0.0) (0.567) Shall accommodate tape (1.969) 12.4 +2.0/−0.0 18.4 width without interference 12 mm (0.488 +0.078/−0.0) (0.724) © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2076_T52X-530 • 3/20/2020 3399 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

KEMET Organic Capacitor (KO-CAP®) T52x/T530 Polymer Electrolytic Capacitors Figure 6 – Tape Leader & Trailer Dimensions Embossed Carrier Punched Carrier Carrier Tape 8 mm & 12 mm only Round Sprocket Holes END START Top Cover Tape Elongated Sprocket Holes (32 mm tape and wider) 100 mm minimum Leader Trailer Components 400 mm minimum 160 mm minimum Top Cover Tape Figure 7 – Maximum Camber Elongated Sprocket Holes Carrier Tape (32 mm & wider tapes) Round Sprocket Holes 1 mm maximum, either direction Straight Edge 250 mm © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2076_T52X-530 • 3/20/2020 4400 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

KEMET Organic Capacitor (KO-CAP®) T52x/T530 Polymer Electrolytic Capacitors KEMET Electronics Corporation Sales Offi ces For a complete list of our global sales offi ces, please visit www.kemet.com/sales. Disclaimer All product specifi cations, statements, information and data (collectively, the “Information”) in this datasheet are subject to change. The customer is responsible for checking and verifying the extent to which the Information contained in this publication is applicable to an order at the time the order is placed. All Information given herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied. Statements of suitability for certain applications are based on KEMET Electronics Corporation’s (“KEMET”) knowledge of typical operating conditions for such applications, but are not intended to constitute – and KEMET specifi cally disclaims – any warranty concerning suitability for a specifi c customer application or use. The Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by KEMET with reference to the use of KEMET’s products is given gratis, and KEMET assumes no obligation or liability for the advice given or results obtained. Although KEMET designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage. Although all product–related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicted or that other measures may not be required. KEMET is a registered trademark of KEMET Electronics Corporation. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2076_T52X-530 • 3/20/2020 4411 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com