Tantalum Surface Mount Capacitors – Automotive Grade T510 Automotive Grade Multiple Anode Low ESR MnO 2 Overview The low ESR, surge-robust T510 is designed for demanding stability, and improved resistance to high in-rush currents. applications that require high surge current and high These benefits are achieved though the utilization of multiple ripple current capability. This series builds upon the anodes, as well as high-stress, low impedance electrical proven capabilities of our industrial grade tantalum chip conditioning performed prior to screening. This series is capacitors, to offer several advantages such as low classified as MSL (Moisture Sensitivity Level) 1 under ESR, high ripple current capability, excellent capacitance J–STD–020: unlimited floor life time at ≤ 30°C/85% RH. Benefits • Complies with AEC–Q200 • Meets or exceeds EIA standard 535BAAC • Tape & Reel standard packaging per EIA 481 • High surge current capability • Optional gold-plated terminations • High ripple current capability • 100% surge current test • 100% steady-state accelerated aging • Capacitance values of 10 to 1,000 μF • Tolerances of ±10% and ±20% • Voltage rating of 4 – 50 VDC • Case sizes E and X • ESR as low as 18 mΩ • RoHS Compliant and lead-free terminations • Operating temperature range of −55°C to +125°C Applications Typical applications include decoupling and filtering in automotive end applications, such as DC/DC converters, portable electronics, telecommunications, and control units requiring high ripple current capability. Environmental Compliance RoHS Compliant (6/6) according to Directive 2002/95/EC when ordered with 100% Sn solder. One world. One KEMET © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2055_T510_AUTO • 12/13/2019 1 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

Tantalum Surface Mount Capacitors – Automotive Grade T510 Automotive Grade Multiple Anode Low ESR MnO 2 K-SIM For a detailed analysis of specific part numbers, please visit ksim.kemet.com to access KEMET’s K-SIM software. KEMET K-SIM is designed to simulate behavior of components with respect to frequency, ambient temperature, and DC bias levels. Ordering Information T 510 X 477 M 006 A T A030 Rated Failure Capacitor Case Capacitance Capacitance Packaging Series Voltage Rate/ Termination Finish ESR Class Size Code (pF) Tolerance (C-Spec) (VDC) Design T = Multiple E First two K = ±10% 004 = 4 A = T = 100% Matte Tin (Sn)-plated A = AUTO grade Blank = 7" Tantalum Anode X digits M = ±20% 006 = 6.3 N/A H = Standard Solder Coated product Reel Low ESR represent 010 = 10 (SnPb 5% Pb minimum) 030 = Maximum 7280 = 13" significant 016 = 16 G = Gold-Plated (A, B, C, D, X only) ESR in mΩ at room Reel figures. Third 020 = 20 temperature digit specifies 025 = 25 (30 mΩ) number of 035 = 35 zeros. 050 = 50 Performance Characteristics Item Performance Characteristics Operating Temperature −55°C to 125°C Rated Capacitance Range 10 – 1,000 µF at 120 Hz/25°C Capacitance Tolerance K Tolerance (10%), M Tolerance (20%) Rated Voltage Range 4 – 50 V DF (120 Hz) Refer to Part Number Electrical Specification Table ESR (100 kHz) Refer to Part Number Electrical Specification Table Leakage Current ≤ 0.01 CV (µA) at rated voltage after 5 minutes © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2055_T510_AUTO • 12/13/2019 22 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

Tantalum Surface Mount Capacitors – Automotive Grade T510 Automotive Grade Multiple Anode Low ESR MnO 2 Qualification Test Condition Characteristics Δ C/C Within ±10% of initial value 85°C at rated voltage, 2,000 hours DF Within initial limits Endurance 125°C at 2/3 rated voltage, 2,000 hours DCL Within 1.25 x initial limit ESR Within initial limits Δ C/C Within ±10% of initial value DF Within initial limits Storage Life 125°C at 0 volts, 2,000 hours DCL Within 1.25 x initial limit ESR Within initial limits Δ C/C Within ±5% of initial value MIL–STD–202, Method 107, Condition B, mounted, DF Within initial limits Thermal Shock −55C° to 125° C, 1,000 cycles DCL Within 1.25 x initial limit ESR Within initial limits +25°C −55°C +85°C +125°C Extreme temperature exposure at a Δ C/C IL* ±10% ±10% ±20% Temperature Stability succession of continuous steps at +25ºC, −55ºC, +25ºC, +85ºC, +125ºC, +25ºC DF IL IL 1.5 x IL 1.5 x IL DCL IL n/a 10 x IL 12 x IL Δ C/C Within ±5% of initial value 85°C, 1.32 x rated voltage 1,000 cycles DF Within initial limits Surge Voltage (125°C, 1.2 x rated voltage) DCL Within initial limits ESR Within initial limits Δ C/C Within ±10% of initial value MIL–STD–202, Method 213, Condition I, 100 G peak Mechanical Shock/ MIL–STD–202, Method 204, Condition D, 10 Hz to DF Within initial limits Vibration 2,000 Hz, 20 G peak DCL Within initial limits *IL = Initial limit Certification KEMET’s Internal Qualification Plan for this Tantalum series of capacitors follows AEC–Q200 guidelines. Standard catalog part types ordered without a specific automotive designator, i.e., suffix AUTO or four digit customer specific designator (C-Spec), are not considered KEMET Automotive Grade tantalum capacitors. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2055_T510_AUTO • 12/13/2019 33 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

Tantalum Surface Mount Capacitors – Automotive Grade T510 Automotive Grade Multiple Anode Low ESR MnO 2 Electrical Characteristics Impedance, ESR vs. Frequency Capacitance vs. Frequency 100 100 T510X226M035ATE100_IMP s) T510X336M035ATE065_IMP hm 10 T510E476M035ATE050_IMP SR (O TTT555111000XXE423723666MMM000333555AAATTTEEE010506005___EEESSSRRR e (μF) E c edance, 1 Capacitan 10 T510X226M035ATE100 p T510X336M035ATE065 m 0.1 I T510E476M035ATE050 0.01 1 100 1,000 10,000 100,000 1,000,000 10,000,000 100 1,000 10,000 100,000 1,000,000 10,000,000 Frequency (Hz) Frequency (Hz) Dimensions – Millimeters (Inches) Metric will govern CATHODE (-) END VIEW SIDE VIEW ANODE (+) END VIEW BOTTOM VIEW A W B B H E F P Termination cutout X T S G S at KEeMitEhTer's e onpdtion, R L Typical Case Size Component Weight F ±0.1 S ±0.3 B ±0.15 X P R T A G E KEMET EIA L W H (mg) ±(.004) ±(.012)(Ref) ±.006 (Ref) (Ref) (Ref) (Ref) (Min) (Ref) (Ref) 7.3 ±0.3 4.3 ±0.3 4.0 ±0.3 2.4 1.3 0.5 0.10 ±0.10 1.7 1.0 0.13 3.8 3.5 3.5 X 7343–43 430.15 (0.287 ±0.012)(0.169 ±0.012)(0.157 ±0.012) (0.094) (0.051) (0.020) (0.004 ±0.004) (0.067) (0.039) (0.005) (0.150) (0.138) (0.138) 7.3 ±0.3 6.0 ±0.3 3.6 ±0.2 4.1 1.3 0.5 0.10 ±0.10 0.13 3.8 3.5 3.5 E 7360–38 n/a n/a 500.73 (0.287 ±0.012)(0.236 ±0.012)(0.142 ±0.008) (0.161) (0.051) (0.020) (0.004 ±0.004) (0.005) (0.150) (0.138) (0.138) Notes: (Ref) – Dimensions provided for reference only. For low profile cases, no dimensions are provided for B, P, or R because these cases do not have a bevel or a notch. These weights are provided as reference. If exact weights are needed, please contact your KEMET Sales Representative. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2055_T510_AUTO • 12/13/2019 44 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

Tantalum Surface Mount Capacitors – Automotive Grade T510 Automotive Grade Multiple Anode Low ESR MnO 2 Table 1 – Ratings & Part Number Reference Case Maximum Rated Rated KEMET Part DC Maximum Allowable Code/ DF ESR Operating MSL Voltage Cap Number Leakage Ripple Current (rms) Case Size Temp % at +20ºC mΩ at +20ºC mA at mA at mA at Reflow (See below for µA at +20ºC VDC at 85ºC µF KEMET/EIA 120 Hz 100 kHz +25ºC +85ºC +125ºC ºC Temp part options) Max/5 Min Max Max 100 kHz 100 kHz 100 kHz ≤ 260ºC 4 680 X/7343-43 T510X687(1)004A(2)A030 27.2 6.0 30 3000 2700 1200 125 1 4 1000 X/7343-43 T510X108(1)004A(2)A035 40.0 6.0 35 2777 2499 1111 125 1 4 1000 E/7360-38 T510E108(1)004A(2)A018 40.0 6.0 18 3979 3581 1592 125 1 6.3 470 X/7343-43 T510X477(1)006A(2)A030 29.6 6.0 30 3000 2700 1200 125 1 6.3 680 X/7343-43 T510X687(1)006A(2)A023 42.8 6.0 23 3426 3083 1370 125 1 6.3 680 E/7360-38 T510E687(1)006A(2)A023 42.8 6.0 23 3520 3168 1408 125 1 10 330 X/7343-43 T510X337(1)010A(2)A035 33.0 6.0 35 2777 2499 1111 125 1 16 150 X/7343-43 T510X157(1)016A(2)A040 24.0 6.0 40 2598 2338 1039 125 1 16 220 X/7343-43 T510X227(1)016A(2)A040 35.2 10.0 40 2598 2338 1039 125 1 20 100 X/7343-43 T510X107(1)020A(2)A035 20.0 8.0 35 2777 2499 1111 125 1 20 100 X/7343-43 T510X107(1)020A(2)A040 20.0 6.0 40 2598 2338 1039 125 1 20 100 X/7343-43 T510X107(1)020A(2)A045 20.0 6.0 45 2449 2204 980 125 1 25 68 X/7343-43 T510X686(1)025A(2)A045 17.0 8.0 45 2449 2204 980 125 1 25 100 E/7360-38 T510E107(1)025A(2)A050 25.0 8.0 50 2387 2148 955 125 1 35 22 X/7343-43 T510X226(1)035A(2)A100 7.7 6.0 100 1643 1479 657 125 1 35 22 X/7343-43 T510X226(1)035A(2)A080 7.7 6.0 80 1837 1653 735 125 1 35 22 X/7343-43 T510X226(1)035A(2)A060 7.7 6.0 60 2121 1909 848 125 1 35 33 X/7343-43 T510X336(1)035A(2)A065 11.6 6.0 65 2038 1834 815 125 1 35 47 X/7343-43 T510X476(1)035A(2)A055 16.5 8.0 55 2216 1994 886 125 1 35 47 X/7343-43 T510X476(1)035A(2)A065 16.5 8.0 65 2038 1834 815 125 1 35 47 E/7360-38 T510E476(1)035A(2)A050 16.5 8.0 50 2387 2148 955 125 1 50 10 X/7343-43 T510X106(1)050A(2)A090 5.0 8.0 90 1732 1559 693 125 1 50 10 X/7343-43 T510X106(1)050A(2)A120 5.0 8.0 120 1500 1350 600 125 1 50 22 X/7343-43 T510X226(1)050A(2)A100 11.0 8.0 100 1643 1479 657 125 1 % at +20ºC mΩ at +20ºC mA at mA at mA at Reflow (See below for µA at +20ºC VDC at 85ºC µF KEMET/EIA 120 Hz 100 kHz +25ºC +85ºC +125ºC ºC Temp part options) Max/5 Min Max Max 100 kHz 100 kHz 100 kHz ≤ 260ºC Maximum Rated Rated Case Code/ KEMET Part Number DC DF ESR Maximum Allowable Operating MSL Voltage Cap Case Size Leakage Ripple Current (rms) Temp (1) To complete KEMET part number, insert M for ±20% or K for ±10%. Designates Capacitance tolerance. (2) To complete KEMET part number, insert T = 100% Matte Tin (Sn)-plated, G = Gold -plated, H = Standard Solder coated (SnPb 5% Pb minimum), N = Non-Magnetic 100% Tin (Sn), M = Non-Magnetic (SnPb). Designates Termination Finish. Refer to Ordering Information for additional detail. Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitution will be marked with the higher voltage rating. Substitutions can include better than series. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2055_T510_AUTO • 12/13/2019 55 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

Tantalum Surface Mount Capacitors – Automotive Grade T510 Automotive Grade Multiple Anode Low ESR MnO 2 Recommended Voltage Derating Guidelines −55°C to 85°C 85°C to 125°C 120% % Change in Working DC V 67% of V 100% Voltage with Temperature R R e g Recommended Maximum a Application Voltage 50% of VR 33% of VR Volt 80% % Change in Working DC Voltage ng with Temperature 67% ki 60% or W % 40% Recommended Maximum Application Voltage 33% (As % of Rated Voltage) 20% 0% −55 25 85 125 Temperature (ºC ) Ripple Current/Ripple Voltage Permissible AC ripple voltage and current are related to Maximum Power equivalent series resistance (ESR) and the power dissipation KEMET Series EIA Dissipation (P max) capabilities of the device. Permissible AC ripple voltage and Case Code Case Code mWatts at 25°C which may be applied is limited by two criteria: w/+20°C Rise 1. The positive peak AC voltage plus the DC bias voltage, A 3216–18 75 if any, must not exceed the DC voltage rating of the B 3528–21 85 capacitor. C 6032–28 110 2. The negative peak AC voltage in combination with D 7343–31 150 X 7343–43 165 bias voltage, if any, must not exceed the allowable limits E 7360–38 200 specified for reverse voltage. See the Reverse Voltage S 3216–12 60 section for allowable limits. T 3528–12 70 The maximum power dissipation by case size can be U 6032–15 90 determined using the table at right. The maximum power V 7343–20 125 dissipation rating stated in the table must be reduced with T510X 7343–43 270 increasing environmental operating temperatures. Refer to T510E 7360–38 285 the table below for temperature compensation requirements. Using the P max of the device, the maximum allowable rms Temperature Compensation Multipliers ripple current or voltage may be determined. for Maximum Ripple Current T ≤ 25°C T ≤ 85°C T ≤ 125°C I(max) = √P max/R 1.00 0.90 0.40 E(max) = Z √P max/R T= Environmental Temperature I = rms ripple current (amperes) E = rms ripple voltage (volts) The maximum power dissipation rating must be reduced with increasing P max = maximum power dissipation (watts) environmental operating temperatures. Refer to the Temperature R = ESR at specified frequency (ohms) Compensation Multiplier table for details. Z = Impedance at specified frequency (ohms) © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2055_T510_AUTO • 12/13/2019 66 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

Tantalum Surface Mount Capacitors – Automotive Grade T510 Automotive Grade Multiple Anode Low ESR MnO 2 Reverse Voltage Solid tantalum capacitors are polar devices and may be permanently damaged or destroyed if connected with the wrong polarity. The positive terminal is identified on the capacitor body by a stripe plus in some cases a beveled edge. A small degree of transient reverse voltage is permissible for short periods per the table. The capacitors should not be operated continuously in reverse mode, even within these limits. Temperature Permissible Transient Reverse Voltage 25°C 15% of Rated Voltage 85°C 5% of Rated Voltage 125°C 1% of Rated Voltage Table 2 – Land Dimensions/Courtyard Metric Density Level A: Density Level B: Density Level C: KEMET Size Maximum (Most) Land Median (Nominal) Land Minimum (Least) Land Code Protrusion (mm) Protrusion (mm) Protrusion (mm) Case EIA W L S V1 V2 W L S V1 V2 W L S V1 V2 E1 7360–38 4.25 2.77 3.67 10.22 7.30 4.13 2.37 3.87 9.12 6.80 4.03 1.99 4.03 8.26 6.54 X1 7343–43 2.55 2.77 3.67 10.22 5.60 2.43 2.37 3.87 9.12 5.10 2.33 1.99 4.03 8.26 4.84 Density Level A: For low-density product applications. Recommended for wave solder applications and provides a wider process window for reflow solder processes. Density Level B: For products with a moderate level of component density. Provides a robust solder attachment condition for reflow solder processes. Density Level C: For high component density product applications. Before adapting the minimum land pattern variations the user should perform qualification testing based on the conditions outlined in IPC standard 7351 (IPC–7351). 1 Height of these chips may create problems in wave soldering. 2 Land pattern geometry is too small for silkscreen outline. V1 L L W W V2 S Grid Placement Courtyard © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2055_T510_AUTO • 12/13/2019 77 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

Tantalum Surface Mount Capacitors – Automotive Grade T510 Automotive Grade Multiple Anode Low ESR MnO 2 Soldering Process KEMET’s families of surface mount capacitors are Profile Feature SnPb Assembly Pb-Free Assembly compatible with wave (single or dual), convection, IR, Preheat/Soak or vapor phase reflow techniques. Preheating of these Temperature Minimum (T ) 100°C 150°C components is recommended to avoid extreme thermal Smin Temperature Maximum (T ) 150°C 200°C stress. KEMET's recommended profile conditions for Smax Time (t) from T to T ) 60 – 120 seconds 60 – 120 seconds convection and IR reflow reflect the profile conditions of the s smin smax Ramp-up Rate (T to T) 3°C/seconds maximum 3°C/seconds maximum IPC/J–STD–020D standard for moisture sensitivity testing. L P Liquidous Temperature (T) 183°C 217°C The devices can safely withstand a maximum of three reflow L Time Above Liquidous (t) 60 – 150 seconds 60 – 150 seconds passes at these conditions. L 220°C* 250°C* Peak Temperature (T) P 235°C** 260°C** Time within 5°C of Maximum Please note that although the X/7343–43 case size can Peak Temperature (t) 20 seconds maximum 30 seconds maximum P withstand wave soldering, the tall profile (4.3 mm maximum) Ramp-down Rate (T to T) 6°C/seconds maximum 6°C/seconds maximum P L dictates care in wave process development. Time 25°C to Peak 6 minutes maximum 8 minutes maximum Temperature Note: All temperatures refer to the center of the package, measured on the Hand soldering should be performed with care due to the package body surface that is facing up during assembly reflow. difficulty in process control. If performed, care should be * For Case Size height > 2.5 mm taken to avoid contact of the soldering iron to the molded ** For Case Size height ≤ 2.5 mm case. The iron should be used to heat the solder pad, applying solder between the pad and the termination, until T P t reflow occurs. Once reflow occurs, the iron should be Maximum Ramp-up Rate = 3°C/second P Maximum Ramp-down Rate = 6°C/second removed immediately. “Wiping” the edges of a chip and T heating the top surface is not recommended. re L tL u rat Tsmax e During typical reflow operations, a slight darkening of the mp T e smin t gold-colored epoxy may be observed. This slight darkening is T s normal and not harmful to the product. Marking permanency is not affected by this change. 25 25°C to Peak Time Storage Tantalum chip capacitors should be stored in normal working environments. While the chips themselves are quite robust in other environments, solderability will be degraded by exposure to high temperatures, high humidity, corrosive atmospheres, and long term storage. In addition, packaging materials will be degraded by high temperature – reels may soften or warp and tape peel force may increase. KEMET recommends that maximum storage temperature not exceed 40ºC and maximum storage humidity not exceed 60% relative humidity. Temperature fluctuations should be minimized to avoid condensation on the parts and atmospheres should be free of chlorine and sulphur bearing compounds. For optimized solderability chip stock should be used promptly, preferably within three years of receipt. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2055_T510_AUTO • 12/13/2019 88 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

Tantalum Surface Mount Capacitors – Automotive Grade T510 Automotive Grade Multiple Anode Low ESR MnO 2 Construction Molded Epoxy Polarity Stripe (+) Detailed Cross Section Case Silver Paint Polarity (Fourth Layer) Bevel (+) Tantalum Wire Leadframe (− Cathode) Washer Tantalum Wire Weld (to attach wire) Carbon (Third Layer) Washer Silver Adhesive Molded Epoxy Leadframe MnO2 Ta2O5 Dielectric Tantalum Case (+ Anode) (Second Layer) (First Layer) Capacitor Marking Date Code * 1st digit = Last number of Year 5 = 2015 KEMET Polarity 6 = 2016 Multi-Anode Indicator (+) 7 = 2017 MnO 8 = 2018 2 9 = 2019 Picofarad Code 2nd and 3rd digit = Week of the 01 = 1st week of the Year to Year 52 = 52nd week of the Year Rated KEMET Voltage ID Date Code* * 840 = 40th week of 2018 © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2055_T510_AUTO • 12/13/2019 99 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

Tantalum Surface Mount Capacitors – Automotive Grade T510 Automotive Grade Multiple Anode Low ESR MnO 2 Tape & Reel Packaging Information KEMET’s molded chip capacitor families are packaged in 8 and 12 mm plastic tape on 7" and 13" reels in accordance with EIA Standard 481: Embossed Carrier Taping of Surface Mount Components for Automatic Handling. This packaging system is compatible with all tape-fed automatic pick-and-place systems. Right hand orientation only Embossed carrier (+) (−) Embossment Top tape thickness 0.10 mm (0.004”) 8 mm (0.315”) or 180 mm (7.0”) or maximum thickness 12 mm (0.472”) 330 mm (13.”) Table 3 – Packaging Quantity Tape Width Case Code 7" Reel* 13" Reel* (mm) KEMET EIA S 3216-12 8 2,500 10,000 T 3528-12 8 3,000 10,000 M 3528-15 8 2,500 8,000 U 6032-15 12 1,000 5,000 L 6032-19 12 1,000 3,000 W 7343-15 12 1,000 3,000 Z 7343-17 12 1,000 3,000 V 7343-20 12 1,000 3,000 A 3216-18 8 2,000 9,000 B 3528-21 8 2,000 8,000 C 6032-28 12 500 3,000 D 7343-31 12 500 2,500 Q 7343-12 12 1,000 3,000 Y 7343-40 12 500 2,000 X 7343-43 12 500 2,000 E/T428P 7360-38 12 500 2,000 H 7360-20 12 1,000 2,500 O 7360-43 12 250 1,000 * No C-Spec required for 7" reel packaging. C-7280 required for 13" reel packaging. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2055_T510_AUTO • 12/13/2019 1100 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

Tantalum Surface Mount Capacitors – Automotive Grade T510 Automotive Grade Multiple Anode Low ESR MnO 2 Figure 1 – Embossed (Plastic) Carrier Tape Dimensions T P 2 T2 ØD0 P0 t(o1l0e rpaintcchee osn c tuampuel a±0ti.v2e mm) E1 A 0 F K 0 W B1 B0 E2 S P 1 1 T1 Center Lines of Cavity ØD Embossment 1 For cavity size, Cover Tape see Note 1, Table 4 B is for tape feeder reference only, 1 including draft concentric about B0. User Direction of Unreeling Table 4 – Embossed (Plastic) Carrier Tape Dimensions Metric will govern Constant Dimensions — Millimeters (Inches) D Minimum R Reference S Minimum T Tape Size D 1 E P P 1 T Maximum 1 0 Note 1 1 0 2 Note 2 Note 3 Maximum 1.0 25.0 8 mm (0.039) (0.984) 1.5 +0.10/−0.0 1.75 ±0.10 4.0 ±0.10 2.0 ±0.05 0.600 0.600 0.100 (0.059 +0.004/−0.0) (0.069 ±0.004) (0.157 ±0.004) (0.079 ±0.002) (0.024) (0.024) (0.004) 1.5 30 12 mm (0.059) (1.181) Variable Dimensions — Millimeters (Inches) B Maximum Tape Size Pitch 1 E Minimum F P T Maximum W Maximum A, B & K Note 4 2 1 2 0 0 0 4.35 6.25 3.5 ±0.05 2.0 ±0.05 or 4.0 ±0.10 2.5 8.3 8 mm Single (4 mm) (0.171) (0.246) (0.138 ±0.002) (0.079 ±0.002 or 0.157 ±0.004) (0.098) (0.327) Single (4 mm) 2.0 ±0.05 (0.079 ±0.002) or Note 5 8.2 10.25 5.5 ±0.05 4.6 12.3 12 mm and Double 4.0 ±0.10 (0.157 ±0.004) or (0.323) (0.404) (0.217 ±0.002) (0.181) (0.484) (8 mm) 8.0 ±0.10 (0.315 ±0.004) 1. The embossment hole location shall be measured from the sprocket hole controlling the location of the embossment. Dimensions of embossment location and hole location shall be applied independent of each other. 2. The tape, with or without components, shall pass around R without damage (see Figure 4). 3. If S < 1.0 mm, there may not be enough area for cover tape to be properly applied (see EIA Standard 481–D, paragraph 4.3, section b). 1 4. B dimension is a reference dimension for tape feeder clearance only. 1 5. The cavity defi ned by A, B and K shall surround the component with suffi cient clearance that: 0 0 0 (a) the component does not protrude above the top surface of the carrier tape. (b) the component can be removed from the cavity in a vertical direction without mechanical restriction, after the top cover tape has been removed. (c) rotation of the component is limited to 20° maximum for 8 and 12 mm tapes (see Figure 2). (d) lateral movement of the component is restricted to 0.5 mm maximum for 8 mm and 12 mm wide tape (see Figure 3). (e) see Addendum in EIA Standard 481–D for standards relating to more precise taping requirements. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2055_T510_AUTO • 12/13/2019 1111 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

Tantalum Surface Mount Capacitors – Automotive Grade T510 Automotive Grade Multiple Anode Low ESR MnO 2 Packaging Information Performance Notes 1. Cover tape break force: 1.0 kg minimum. 2. Cover tape peel strength: The total peel strength of the cover tape from the carrier tape shall be: Tape Width Peel Strength 8 mm 0.1 to 1.0 newton (10 to 100 gf) 12 mm 0.1 to 1.3 newton (10 to 130 gf) The direction of the pull shall be opposite the direction of the carrier tape travel. The pull angle of the carrier tape shall be 165° to 180° from the plane of the carrier tape. During peeling, the carrier and/or cover tape shall be pulled at a velocity of 300 ±10 mm/minute. 3. Labeling: Bar code labeling (standard or custom) shall be on the side of the reel opposite the sprocket holes. Refer to EIA Standards 556 and 624. Figure 2 – Maximum Component Rotation ° T Maximum Component Rotation Maximum Component Rotation Top View Side View Typical Pocket Centerline Tape Maximum ° Width (mm) Rotation ( °) s T 8, 12 20 Bo Tape Maximum Width (mm) Rotation ( °) S 8, 12 20 Typical Component Centerline Ao Figure 3 – Maximum Lateral Movement Figure 4 – Bending Radius 8 mm & 12 mm Tape Embossed Punched Carrier Carrier 0.5 mm maximum 0.5 mm maximum Bending R R Radius © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2055_T510_AUTO • 12/13/2019 1122 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

Tantalum Surface Mount Capacitors – Automotive Grade T510 Automotive Grade Multiple Anode Low ESR MnO 2 Figure 5 – Reel Dimensions W Full Radius, (Includes Access Hole at 3 See Note Slot Location flange distortion (Ø 40 mm minimum) at outer edge) W (Measured at hub) 2 A D (See Note) N C (Arbor hole W (Measured at hub) diameter) 1 If present, tape slot in core for tape start: 2.5 mm minimum width x 10.0 mm minimum depth B (see Note) Note: Drive spokes optional; if used, dimensions B and D shall apply. Table 5 – Reel Dimensions Metric will govern Constant Dimensions — Millimeters (Inches) Tape Size A B Minimum C D Minimum 178 ±0.20 8 mm (7.008 ±0.008) 1.5 13.0 +0.5/−0.2 20.2 or (0.059) (0.521 +0.02/−0.008) (0.795) 12 mm 330 ±0.20 (13.000 ±0.008) Variable Dimensions — Millimeters (Inches) Tape Size N Minimum W W Maximum W 1 2 3 8.4 +1.5/−0.0 14.4 8 mm 50 (0.331 +0.059/−0.0) (0.567) Shall accommodate tape (1.969) 12.4 +2.0/−0.0 18.4 width without interference 12 mm (0.488 +0.078/−0.0) (0.724) © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2055_T510_AUTO • 12/13/2019 1133 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

Tantalum Surface Mount Capacitors – Automotive Grade T510 Automotive Grade Multiple Anode Low ESR MnO 2 Figure 6 – Tape Leader & Trailer Dimensions Embossed Carrier Punched Carrier Carrier Tape 8 mm & 12 mm only Round Sprocket Holes END START Top Cover Tape Elongated Sprocket Holes (32 mm tape and wider) 100 mm minimum Leader Trailer Components 400 mm minimum 160 mm minimum Top Cover Tape Figure 7 – Maximum Camber Elongated Sprocket Holes Carrier Tape (32 mm & wider tapes) Round Sprocket Holes 1 mm maximum, either direction Straight Edge 250 mm © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2055_T510_AUTO • 12/13/2019 1144 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

Tantalum Surface Mount Capacitors – Automotive Grade T510 Automotive Grade Multiple Anode Low ESR MnO 2 KEMET Electronics Corporation Sales Offi ces For a complete list of our global sales offi ces, please visit www.kemet.com/sales. Disclaimer All product specifi cations, statements, information and data (collectively, the “Information”) in this datasheet are subject to change. The customer is responsible for checking and verifying the extent to which the Information contained in this publication is applicable to an order at the time the order is placed. All Information given herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied. Statements of suitability for certain applications are based on KEMET Electronics Corporation’s (“KEMET”) knowledge of typical operating conditions for such applications, but are not intended to constitute – and KEMET specifi cally disclaims – any warranty concerning suitability for a specifi c customer application or use. The Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by KEMET with reference to the use of KEMET’s products is given gratis, and KEMET assumes no obligation or liability for the advice given or results obtained. Although KEMET designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage. Although all product–related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicted or that other measures may not be required. KEMET is a registered trademark of KEMET Electronics Corporation. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2055_T510_AUTO • 12/13/2019 1155 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: K EMET: T510X336M035AHE065 T510X477M006AT T510X687K004AT T510X687M004AS T510X687K004ASE030 T510X337M010AS T510E108K004AS4115 T510X687M004AT T510E107K025ASE030 T510X477K006AS T510E687K006ASE012 T510X337K010ASE035 T510X337K010AS7280 T510X477M006AS T510E687M006ASE023 T510X477K006AT T510E107M025AS T510E108M004ASE018 T510E108M004AS4115 T510E107K025ASE050 T510X337K010AS T510E108K004ASE010 T510E687K006AS T510E108M004AS T510E687K006ASE023 T510X477K006ASE030 T510E107K025AS T510E476K035ASE050 T510E108K004ASE018 T510E108K004AS T510X337M010ASE035 T510E687K006AS4115 T510X477M006ASE030 T510X108K004ATA035 T510X107M020AT T510X226K050AT T510X337M010AT T510X687K006AT T510X107K020AT T510X686M025AT T510X477K006ATA030 T510X337K010ATA035 T510X106K050ATA120 T510X107K020ATA035 T510X226K050ATA100 T510X686K025ATA045 T510X337M010ATE040 T510X337K010ATE040 T510X157K016ATA040 T510X157M016ATA040 T510X337K010ATE023 T510X476M035AHA055 T510X686K025AHA045 T510X476M035ATA065 T510X476K035ATE100 T510X476K035ATA065 T510X476K035ATA055 T510X476M035ATA055 T510X107K020AHA035 T510X106M050ATA120 T510X106M050ATA090 T510X106K050ATA090 T510X106K050AHA120 T510X476K035AHA055 T510X336M035ATA065 T510X336K035ATA065 T510X687K006AGA023 T510X226K050AHA100 T510X687K006ATA023 T510X337K010AHA035 T510X687K004ATA030 T510X477M006ATA030 T510X107K020ATA045 T510X227K016ATA040