Tantalum Surface Mount Capacitors – Automotive Grade T499 Automotive Grade MnO 175°C 2 Overview The KEMET T499 is a high-temperature product that offers T499 AUTO is classified as having moisture sensitivity level optimum performance characteristics in applications with (MSL) 1 under J STD 020: unlimited floorlife time at operating temperatures up to 175°C. Advanced materials ≤ 30°C/85% RH. T499 AUTO is available in five standard EIA and testing allow this series to perform with a reliability case sizes, with ROHS-compliant terminations as standard. level of 0.5%/1000 hours at rated voltage and temperature. Benefits • Meets or exceeds EIA Standard 535BAAC • Taped and reeled per EIA 481 • Symmetrical, compliant terminations • Optional gold-plated terminations • Laser-marked case • 100% surge current testing • Complies with AEC–Q200 • Capacitance values of 0.15 to 220 μF • Tolerances of ±10% and ±20% • Voltage rating of 6 – 50 VDC • 100% steady-state accelerated aging • Voltage derating is 1/2 at 175°C • RoHS compliant and lead-free terminations standard • Operating temperature range of −55°C to +175°C Applications Typical applications include decoupling and filtering in industrial and automotive end applications, such as DC/DC converters, portable electronics, telecommunications, and control units operating at temperatures up to 175°C. Environmental Compliance RoHS compliant (6/6) according to Directive 2002/95/EC when ordered with 100% Sn solder or gold-plated. One world. One KEMET © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2054_T499_AUTO • 3/17/2020 1 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

Tantalum Surface Mount Capacitors – Automotive Grade T499 Automotive Grade MnO 175°C 2 K-SIM For a detailed analysis of specific part numbers, please visit ksim.kemet.com to access KEMET’s K-SIM software. KEMET K-SIM is designed to simulate behavior of components with respect to frequency, ambient temperature, and DC bias levels. Ordering Information T 499 X 227 M 010 A T E500 Rated Failure Capacitor Case Capacitance Capacitance Termination Packaging Series Voltage Rate/ ESR Class Size Code (pF) Tolerance Finish (C-Spec) (VDC) Design T = High A First two digits K = ±10% 006 = 6.3 A = N/A T = 100% Matte tin E = ESR Blank = 7" reel Tantalum Temperature B represent M = ±20% 010 = 10 (Sn)-plated Last three 7280 = 13" reel 175°C C significant 016 = 16 G = Gold-plated digits 7027 = Moisture D figures. Third digit 020 = 20 H = Standard specify barrier bag X specifies number 025 = 25 solder coated ESR in mΩ of zeros. 035 = 35 (SnPb 5% Pb (500 = 050 = 50 minimum) 500 mΩ) Performance Characteristics Item Performance Characteristics Operating Temperature −55°C to 175°C Rated Capacitance Range 0.15 – 220 μF at 120 Hz/25°C Capacitance Tolerance K tolerance (10%), M tolerance (20%) Rated Voltage Range 6 – 50 V DF (120 Hz) Refer to Part Number Electrical Specification Table ESR (100 kHz) Refer to Part Number Electrical Specification Table Leakage Current ≤ 0.01 CV (µA) at rated voltage after 5 minutes © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2054_T499_AUTO • 3/17/2020 22 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

Tantalum Surface Mount Capacitors – Automotive Grade T499 Automotive Grade MnO 175°C 2 Qualification Test Condition Characteristics Δ C/C Within ±10% of initial value DF Within initial limits Endurance 175°C at 1/2 rated voltage, 2,000 hours DCL Within 1.25 x initial limit ESR Within initial limits Δ C/C Within ±10% of initial value DF Within initial limits Storage Life 175°C at 0 volts, 2,000 hours DCL Within 1.25 x initial limit ESR Within initial limits Δ C/C Within ±5% of initial value MIL–STD–202, Method 107, Condition B, mounted, DF Within initial limits Thermal Shock −55°C to 175°C, 1,000 cycles DCL Within 1.25 x initial limit ESR Within initial limits +25°C −55°C +85°C +175°C Extreme temperature exposure at a Δ C/C IL* ±10% ±10% ±30% Temperature Stability succession of continuous steps at +25°C, −55°C, +25°C, +85°C, +175°C, +25°C DF IL IL 1.5 x IL 1.5 x IL DCL IL N/A 10 x IL 12 x IL Δ C/C Within ±5% of initial value 85°C, 1.32 x rated voltage 1,000 cycles DF Within initial limits Surge Voltage (150°C, 1.2 x rated voltage) DCL Within initial limits ESR Within initial limits MIL–STD–202, Method 213, Figure 1, Condition F, 1,500 G Δ C/C Within ±10% of initial value Mechanical Shock/ peak DF Within initial limits Vibration MIL–STD–202, Method 214, 5g for 20 minutes/12 cycles each of 3 orientations. Test from 10 to 2,000 Hz DCL Within initial limits *IL = Initial Limit Certification KEMET’s Internal Qualification Plan for this Tantalum series of capacitors follows AEC–Q200 guidelines. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2054_T499_AUTO • 3/17/2020 33 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

Tantalum Surface Mount Capacitors – Automotive Grade T499 Automotive Grade MnO 175°C 2 Electrical Characteristics ESR vs. Frequency Capacitance vs. Frequency 1,000 1,000 T499B106M010ATE1K8 T499B106M010ATE3K5_IMP T499D476M010ATE600 T499D476M010ATE600_IMP T499X227M010ATE500 hms)100 TT449999BX120267MM001100AATTEE35K005__IEMSPR µF) 100 dance, ESR (O 10 TT449999DX247267MM001100AATTEE650000__EESSRR Capacitance ( 10 e p m I 1 1 0.1 0.1 100 1,000 10,000 100,000 1,000,000 10,000,000 100 1,000 10,000 100,000 1,000,000 10,000,000 Frequency ( Hz) Frequency ( Hz) Dimensions – Millimeters (Inches) Metric will govern CATHODE (-) END VIEW SIDE VIEW ANODE (+) END VIEW BOTTOM VIEW A W B B H E F P Termination cutout X T S G S at KEeMitEhTer's e onpdtion, R L Case Size Component F ±0.1 S ±0.3 B ±0.15(Ref) KEMET EIA L W H X (Ref) P (Ref) R (Ref) T (Ref) A (Min) G (Ref) E (Ref) ±(0.004)±(0.012) ±0.006 A 3216–18 3.2±0.2 1.6±0.2 1.6±0.2 1.2 0.8 0.4 0.10±0.10 0.4 0.4 0.13 1.2 1.1 1.3 (0.126±0.008)(0.063±0.008)(0.063±0.008) (0.047) (0.031) (0.016) (0.004±0.004) (0.016) (0.016) (0.005) (0.047) (0.043) (0.051) B 3528–21 3.5±0.2 2.8±0.2 1.9±0.2 2.2 0.8 0.4 0.10±0.10 0.5 1.0 0.13 1.9 1.8 2.2 (0.138±0.008)(0.110±0.008)(0.075±0.008) (0.087) (0.031) (0.016) (0.004±0.004) (0.020) (0.039) (0.005) (0.075) (0.071) (0.087) C 6032–28 6.0±0.3 3.2±0.3 2.5±0.3 2.2 1.3 0.5 0.10±0.10 0.9 1.0 0.13 3.1 2.8 2.4 (0.236±0.012)(0.126±0.012)(0.098±0.012) (0.087) (0.051) (0.020) (0.004±0.004) (0.035) (0.039) (0.005) (0.122) (0.110) (0.094) D 7343–31 7.3±0.3 4.3±0.3 2.8±0.3 2.4 1.3 0.5 0.10±0.10 0.9 1.0 0.13 3.8 3.5 3.5 (0.287±0.012)(0.169±0.012)(0.110±0.012) (0.094) (0.051) (0.020) (0.004±0.004) (0.035) (0.039) (0.005) (0.150) (0.138) (0.138) X 7343–43 7.3±0.3 4.3±0.3 4.0±0.3 2.4 1.3 0.5 0.10±0.10 1.7 1.0 0.13 3.8 3.5 3.5 (0.287±0.012)(0.169±0.012)(0.157±0.012) (0.094) (0.051) (0.020) (0.004±0.004) (0.067) (0.039) (0.005) (0.150) (0.138) (0.138) Notes: (Ref) – Dimensions provided for reference only. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2054_T499_AUTO • 3/17/2020 44 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

Tantalum Surface Mount Capacitors – Automotive Grade T499 Automotive Grade MnO 175°C 2 Table 1 – Ratings & Part Number Reference Case Maximum Rated Rated Code/ KEMET Part DC Maximum Allowable DF ESR Operating MSL Voltage Cap Case Number Leakage Ripple Current (rms) Temp Size % at +20°C mΩ at +20°C mA at mA at mA at Reflow (See below for µA at +20°C VDC at 85°C µF KEMET/EIA 120 Hz 100 kHz +25°C 100 +85°C 100 +125°C 100 °C Temp part options) Max/5 Min Max Max kHz kHz kHz ≤ 260°C 6.3 6.8 B/3528-21 T499B685(1)006A(2)E3K5 0.5 6 3500 156 140.4 62.4 175 1 6.3 10 B/3528-21 T499B106(1)006A(2)E3K5 0.6 6 3,500 156 140 62 175 1 6.3 15 B/3528-21 T499B156(1)006A(2)E3K5 0.9 6 3,500 156 140 62 175 1 6.3 22 B/3528-21 T499B226(1)006A(2)E3K5 1.4 6 3,500 156 140 62 175 1 6.3 22 C/6032-28 T499C226(1)006A(2)E1K8 1.4 6 1,800 247 222 99 175 1 6.3 33 B/3528-21 T499B336(1)006A(2)E3K0 2.1 6 3,000 168 151 67 175 1 6.3 33 C/6032-28 T499C336(1)006A(2)E1K8 2.1 6 1,800 247 222 99 175 1 6.3 47 C/6032-28 T499C476(1)006A(2)E1K8 3.0 6 1,800 247 222 99 175 1 6.3 47 D/7343-31 T499D476(1)006A(2)E800 3.0 6 800 433 390 173 175 1 6.3 68 C/6032-28 T499C686(1)006A(2)E1K2 4.3 6 1,200 303 273 121 175 1 6.3 100 D/7343-31 T499D107(1)006A(2)E800 6.3 8 800 433 390 173 175 1 10 1.5 A/3216-18 T499A155(1)010A(2)E8K0 0.5 6 8,000 97 87 39 175 1 10 2.2 A/3216-18 T499A225(1)010A(2)E8K0 0.5 6 8,000 97 87 39 175 1 10 3.3 A/3216-18 T499A335(1)010A(2)E6K0 0.5 6 6,000 112 101 45 175 1 10 4.7 A/3216-18 T499A475(1)010A(2)E6K0 0.5 6 6,000 112 101 45 175 1 10 4.7 B/3528-21 T499B475(1)010A(2)E3K5 0.5 6 3,500 156 140 62 175 1 10 6.8 A/3216-18 T499A685(1)010A(2)E6K0 0.7 6 6,000 112 101 45 175 1 10 6.8 B/3528-21 T499B685(1)010A(2)E3K5 0.7 6 3,500 156 140 62 175 1 10 10 B/3528-21 T499B106(1)010A(2)E3K5 1.0 6 3,500 156 140 62 175 1 10 10 C/6032-28 T499C106(1)010A(2)E1K8 1.0 6 1,800 247 222 99 175 1 10 15 B/3528-21 T499B156(1)010A(2)E3K5 1.5 6 3,500 156 140 62 175 1 10 15 C/6032-28 T499C156(1)010A(2)E1K8 1.5 6 1,800 247 222 99 175 1 10 22 B/3528-21 T499B226(1)010A(2)E3K0 2.2 6 3,000 168 151 67 175 1 10 22 C/6032-28 T499C226(1)010A(2)E1K8 2.2 6 1,800 247 222 99 175 1 10 33 C/6032-28 T499C336(1)010A(2)E1K8 3.3 6 1,800 247 222 99 175 1 10 33 D/7343-31 T499D336(1)010A(2)E1K6 3.3 6 1,600 306 275 122 175 1 10 47 D/7343-31 T499D476(1)010A(2)E800 4.7 6 800 433 390 173 175 1 10 68 D/7343-31 T499D686(1)010A(2)E800 6.8 6 800 433 390 173 175 1 10 100 D/7343-31 T499D107(1)010A(2)E700 10.0 8 700 463 417 185 175 1 10 220 X/7343-43 T499X227(1)010A(2)E500 22.0 8 500 574 517 230 175 1 16 1 A/3216-18 T499A105(1)016A(2)E10K 0.5 4 10,000 87 78 35 175 1 16 1.5 A/3216-18 T499A155(1)016A(2)E8K0 0.5 6 8,000 97 87 39 175 1 16 2.2 A/3216-18 T499A225(1)016A(2)E6K0 0.5 6 6,000 112 101 45 175 1 16 3.3 A/3216-18 T499A335(1)016A(2)E6K0 0.5 6 6,000 112 101 45 175 1 16 3.3 B/3528-21 T499B335(1)016A(2)E3K5 0.5 6 3,500 156 140 62 175 1 16 4.7 B/3528-21 T499B475(1)016A(2)E6K0 0.8 6 6,000 119 107 48 175 1 16 6.8 A/3216-18 T499A685(1)016A(2)E7K0 1.1 6 7,000 104 94 42 175 1 16 6.8 B/3528-21 T499B685(1)016A(2)E3K5 1.1 6 3,500 156 140 62 175 1 16 6.8 C/6032-28 T499C685(1)016A(2)E1K8 1.1 6 1,800 247 222 99 175 1 16 10 B/3528-21 T499B106(1)016A(2)E3K5 1.6 6 3,500 156 140 62 175 1 16 10 C/6032-28 T499C106(1)016A(2)E1K8 1.6 6 1,800 247 222 99 175 1 16 15 C/6032-28 T499C156(1)016A(2)E1K8 2.4 6 1,800 247 222 99 175 1 16 22 C/6032-28 T499C226(1)016A(2)E1K6 3.5 6 1,600 262 236 105 175 1 16 22 D/7343-31 T499D226(1)016A(2)E800 3.5 6 800 433 390 173 175 1 16 33 D/7343-31 T499D336(1)016A(2)E800 5.3 6 800 433 390 173 175 1 16 47 D/7343-31 T499D476(1)016A(2)E800 7.5 6 800 433 390 173 175 1 % at +20°C mΩ at +20°C mA at mA at mA at Reflow (See below for µA at +20°C VDC at 85°C µF KEMET/EIA 120 Hz 100 kHz +25°C 100 +85°C 100 +125°C 100 °C Temp part options) Max/5 Min Max Max kHz kHz kHz ≤ 260°C Maximum Rated Rated Case Code/ DC Maximum Allowable KEMET Part Number DF ESR Operating MSL Voltage Cap Case Size Leakage Ripple Current (rms) Temp (1) To complete KEMET part number, insert M for ±20% or K for ±10%. Designates Capacitance tolerance. (2) To complete KEMET part number, insert T = 100% Matte Tin (Sn) Plated, G = Gold Plated, H = Standard Solder coated (SnPb 5% Pb minimum). Designates Termination Finish. Refer to Ordering Information for additional detail. Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitution will be marked with the higher voltage rating. Substitutions can include better than series. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2054_T499_AUTO • 3/17/2020 55 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

Tantalum Surface Mount Capacitors – Automotive Grade T499 Automotive Grade MnO 175°C 2 Table 1 – Ratings & Part Number Reference cont. Case Maximum Rated Rated Code/ KEMET Part DC Maximum Allowable DF ESR Operating MSL Voltage Cap Case Number Leakage Ripple Current (rms) Temp Size % at +20°C mΩ at +20°C mA at mA at mA at Reflow (See below for µA at +20°C VDC at 85°C µF KEMET/EIA 120 Hz 100 kHz +25°C 100 +85°C 100 +125°C 100 °C Temp part options) Max/5 Min Max Max kHz kHz kHz ≤ 260°C 16 100 X/7343-43 T499X107(1)016A(2)E300 16.0 6 300 742 668 297 175 1 20 0.68 A/3216-18 T499A684(1)020A(2)E12K 0.5 4 12,000 79 71 32 175 1 20 1 A/3216-18 T499A105(1)020A(2)E10K 0.5 4 10,000 87 78 35 175 1 20 1.5 A/3216-18 T499A155(1)020A(2)E8K0 0.5 6 8,000 97 87 39 175 1 20 2.2 B/3528-21 T499B225(1)020A(2)E3K5 0.5 6 3,500 156 140 62 175 1 20 3.3 B/3528-21 T499B335(1)020A(2)E3K5 0.7 6 3,500 156 140 62 175 1 20 4.7 B/3528-21 T499B475(1)020A(2)E3K5 0.9 6 3,500 156 140 62 175 1 20 4.7 C/6032-28 T499C475(1)020A(2)E2K4 0.9 6 2,400 214 193 86 175 1 20 6.8 C/6032-28 T499C685(1)020A(2)E1K9 1.4 6 1,900 241 217 96 175 1 20 10 C/6032-28 T499C106(1)020A(2)E1K8 2.0 6 1,800 247 222 99 175 1 20 15 C/6032-28 T499C156(1)020A(2)E1K7 3.0 6 1,700 254 229 102 175 1 20 15 D/7343-31 T499D156(1)020A(2)E1K0 3.0 6 1,000 387 348 155 175 1 20 22 D/7343-31 T499D226(1)020A(2)E800 4.4 6 800 433 390 173 175 1 25 0.47 A/3216-18 T499A474(1)025A(2)E14K 0.5 4 14,000 73 66 29 175 1 25 0.68 A/3216-18 T499A684(1)025A(2)E10K 0.5 4 10,000 87 78 35 175 1 25 1 A/3216-18 T499A105(1)025A(2)E8K0 0.5 4 8,000 97 87 39 175 1 25 1.5 A/3216-18 T499A155(1)025A(2)E5K0 0.5 6 5,000 122 110 49 175 1 25 2.2 B/3528-21 T499B225(1)025A(2)E4K5 0.6 6 4,500 137 123 55 175 1 25 3.3 C/6032-28 T499C335(1)025A(2)E2K5 0.8 6 2,500 210 189 84 175 1 25 4.7 C/6032-28 T499C475(1)025A(2)E2K4 1.2 6 2,400 214 193 86 175 1 25 6.8 C/6032-28 T499C685(1)025A(2)E1K9 1.7 6 1,900 241 217 96 175 1 25 6.8 D/7343-31 T499D685(1)025A(2)E1K1 1.7 6 1,100 369 332 148 175 1 25 10 C/6032-28 T499C106(1)025A(2)E1K5 2.5 6 1,500 271 244 108 175 1 25 10 D/7343-31 T499D106(1)025A(2)E1K0 2.5 6 1,000 387 348 155 175 1 25 15 D/7343-31 T499D156(1)025A(2)E1K0 3.8 6 1,000 387 348 155 175 1 25 22 D/7343-31 T499D226(1)025A(2)E800 5.5 6 800 433 390 173 175 1 25 33 D/7343-31 T499D336(1)025A(2)E700 8.3 6 700 463 417 185 175 1 35 0.15 A/3216-18 T499A154(1)035A(2)E19K 0.5 4 19,000 63 57 25 175 1 35 0.22 A/3216-18 T499A224(1)035A(2)E18K 0.5 4 18,000 65 59 26 175 1 35 0.33 A/3216-18 T499A334(1)035A(2)E15K 0.5 4 15,000 71 64 28 175 1 35 0.47 B/3528-21 T499B474(1)035A(2)E8K0 0.5 4 8,000 103 93 41 175 1 35 0.68 B/3528-21 T499B684(1)035A(2)E6K5 0.5 4 6,000 119 107 48 175 1 35 1 A/3216-18 T499A105(1)035A(2)E10K 0.5 4 10,000 87 78 35 175 1 35 1 B/3528-21 T499B105(1)035A(2)E5K0 0.5 4 5,000 130 117 52 175 1 35 1.5 C/6032-28 T499C155(1)035A(2)E4K5 0.5 6 4,500 156 140 62 175 1 35 2.2 C/6032-28 T499C225(1)035A(2)E3K5 0.8 6 3,500 177 159 71 175 1 35 3.3 C/6032-28 T499C335(1)035A(2)E2K5 1.2 6 2,500 210 189 84 175 1 35 4.7 C/6032-28 T499C475(1)035A(2)E2K5 1.6 6 2,500 210 189 84 175 1 35 4.7 D/7343-31 T499D475(1)035A(2)E1K5 1.6 6 1,500 316 284 126 175 1 35 4.7 D/7343-31 T499D475(1)035A(2)E1K0 1.6 6 1,000 387 348 155 175 1 35 4.7 D/7343-31 T499D475(1)035A(2)E900 1.6 6 900 408 367 163 175 1 35 6.8 D/7343-31 T499D685(1)035A(2)E1K3 2.4 6 1,300 340 306 136 175 1 35 10 D/7343-31 T499D106(1)035A(2)E1K0 3.5 6 1,000 387 348 155 175 1 35 22 X/7343-43 T499X226(1)035A(2)E700 7.7 6 700 486 437 194 175 1 35 33 X/7343-43 T499X336(1)035A(2)E600 11.6 6 600 524 472 210 175 1 50 3.3 D/7343-31 T499D335(1)050A(2)E2K0 1.7 6 2,000 274 247 110 175 1 50 4.7 D/7343-31 T499D475(1)050A(2)E900 2.4 4.5 900 408 367 163 175 1 50 10 D/7343-31 T499D106(1)050A(2)E1K0 5.0 6 1,000 387 348 155 175 1 % at +20°C mΩ at +20°C mA at mA at mA at Reflow (See below for µA at +20°C VDC at 85°C µF KEMET/EIA 120 Hz 100 kHz +25°C 100 +85°C 100 +125°C 100 °C Temp part options) Max/5 Min Max Max kHz kHz kHz ≤ 260°C Maximum Rated Rated Case Code/ DC Maximum Allowable KEMET Part Number DF ESR Operating MSL Voltage Cap Case Size Leakage Ripple Current (rms) Temp (1) To complete KEMET part number, insert M for ±20% or K for ±10%. Designates Capacitance tolerance. (2) To complete KEMET part number, insert T = 100% Matte Tin (Sn) Plated, G = Gold Plated, H = Standard Solder coated (SnPb 5% Pb minimum). Designates Termination Finish. Refer to Ordering Information for additional detail. Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitution will be marked with the higher voltage rating. Substitutions can include better than series. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2054_T499_AUTO • 3/17/2020 66 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

Tantalum Surface Mount Capacitors – Automotive Grade T499 Automotive Grade MnO 175°C 2 Recommended Voltage Derating Guidelines Recommended 120% Rated Working Voltage Application Voltage (for Voltage 100% maximum reliability) e % Change in Working DC 85°C 175°C 85°C 175°C oltag80% Voltage with Temperature 6.3 6.3 3.15 3.15 1.58 V g 60% n 10 10 5.00 5 2.50 ki or 5500%% 16 16 8.00 8 4.00 W40% Recommended Maximum 20 20 10.00 10 5.00 % Application Voltage (As % of Rated Voltage) 2255%% 25 25 12.50 12.5 6.25 20% 35 35 17.50 17.5 8.75 0% 50 50 25.00 25 12.50 -55 25 85 125 175 Temperature (ºC) Ripple Current/Ripple Voltage Permissible AC ripple voltage and current are related to Maximum Power equivalent series resistance (ESR) and the power dissipation Dissipation KEMET Series EIA capabilities of the device. Permissible AC ripple voltage (P max) mWatts and Case Code Case Code which may be applied is limited by two criteria: at 25°C with 1. The positive peak AC voltage plus the DC bias voltage, +20°C Rise if any, must not exceed the DC voltage rating of the A 3216–18 75 capacitor. B 3528–21 85 2. The negative peak AC voltage in combination with C 6032–28 110 bias voltage, if any, must not exceed the allowable limits D 7343–31 150 X 7343–43 165 specified for reverse voltage. See the Reverse Voltage E 7360–38 200 section for allowable limits. S 3216–12 60 The maximum power dissipation by case size can be T 3528–12 70 determined using the table at right. The maximum power U 6032–15 90 dissipation rating stated in the table must be reduced with V 7343–20 125 increasing environmental operating temperatures. Refer to T510X 7343–43 270 the table below for temperature compensation requirements. T510E 7360–38 285 Using the P max of the device, the maximum allowable rms Temperature Compensation Multipliers ripple current or voltage may be determined. for Maximum Ripple Current T ≤ 25°C T ≤ 85°C T ≤ 125°C T ≤ 175°C I(max) = √P max/R 1.00 0.90 0.40 0.20 E(max) = Z √P max/R T= Environmental Temperature I = rms ripple current (amperes) E = rms ripple voltage (volts) The maximum power dissipation rating must be reduced with increasing P max = maximum power dissipation (watts) environmental operating temperatures. Refer to the Temperature R = ESR at specified frequency (ohms) Compensation Multiplier table for details. Z = Impedance at specified frequency (ohms) © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2054_T499_AUTO • 3/17/2020 77 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

Tantalum Surface Mount Capacitors – Automotive Grade T499 Automotive Grade MnO 175°C 2 Reverse Voltage Solid tantalum capacitors are polar devices and may be permanently damaged or destroyed if connected with the wrong polarity. The positive terminal is identified on the capacitor body by a stripe plus in some cases a beveled edge. A small degree of transient reverse voltage is permissible for short periods per the table. The capacitors should not be operated continuously in reverse mode, even within these limits. Temperature Permissible Transient Reverse Voltage 25°C 15% of Rated Voltage 85°C 5% of Rated Voltage 125°C 1% of Rated Voltage Table 2 – Land Dimensions/Courtyard Metric Density Level A: Density Level B: Density Level C: KEMET Size Maximum (Most) Land Median (Nominal) Land Minimum (Least) Land Code Protrusion (mm) Protrusion (mm) Protrusion (mm) Case EIA W L S V1 V2 W L S V1 V2 W L S V1 V2 A 3216–18 1.35 2.20 0.62 6.02 2.80 1.23 1.80 0.82 4.92 2.30 1.13 1.42 0.98 4.06 2.04 B 3528–21 2.35 2.21 0.92 6.32 4.00 2.23 1.80 1.12 5.22 3.50 2.13 1.42 1.28 4.36 3.24 C 6032–28 2.35 2.77 2.37 8.92 4.50 2.23 2.37 2.57 7.82 4.00 2.13 1.99 2.73 6.96 3.74 D 7343–31 2.55 2.77 3.67 10.22 5.60 2.43 2.37 3.87 9.12 5.10 2.33 1.99 4.03 8.26 4.84 X1 7343–43 2.55 2.77 3.67 10.22 5.60 2.43 2.37 3.87 9.12 5.10 2.33 1.99 4.03 8.26 4.84 Density Level A: For low-density product applications. Recommended for wave solder applications and provides a wider process window for reflow solder processes. Density Level B: For products with a moderate level of component density. Provides a robust solder attachment condition for reflow solder processes. Density Level C: For high component density product applications. Before adapting the minimum land pattern variations the user should perform qualification testing based on the conditions outlined in IPC standard 7351 (IPC–7351). 1 Height of these chips may create problems in wave soldering. 2 Land pattern geometry is too small for silkscreen outline. V1 L L W W V2 S Grid Placement Courtyard © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2054_T499_AUTO • 3/17/2020 88 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

Tantalum Surface Mount Capacitors – Automotive Grade T499 Automotive Grade MnO 175°C 2 Soldering Process The KEMET families of surface mount capacitors are Profile Feature SnPb Assembly Pb-Free Assembly compatible with wave (single or dual), convection, IR, Preheat/Soak or vapor phase reflow techniques. Preheating of these Temperature Minimum (T ) 100°C 150°C components is recommended to avoid extreme thermal Smin Temperature Maximum (T ) 150°C 200°C stress. KEMET's recommended profile conditions for Smax Time (t) from T to T ) 60 – 120 seconds 60 – 120 seconds convection and IR reflow reflect the profile conditions of the s smin smax Ramp-up Rate (T to T) 3°C/second maximum 3°C/second maximum IPC/J–STD–020D standard for moisture sensitivity testing. L P Liquidous Temperature (T) 183°C 217°C The devices can safely withstand a maximum of three reflow L Time Above Liquidous (t) 60 – 150 seconds 60 – 150 seconds passes at these conditions. L 220°C* 250°C* Peak Temperature (T) P 235°C** 260°C** Time within 5°C of Maximum Please note that although the X/7343–43 case size can Peak Temperature (t) 20 seconds maximum 30 seconds maximum P withstand wave soldering, the tall profile (4.3 mm maximum) Ramp-down Rate (T to T) 6°C/second maximum 6°C/second maximum P L dictates care in wave process development. Time 25°C to Peak 6 minutes maximum 8 minutes maximum Temperature Note: All temperatures refer to the center of the package, measured on the Hand soldering should be performed with care due to the package body surface that is facing up during assembly reflow. difficulty in process control. If performed, care should be * For Case Size height > 2.5 mm taken to avoid contact of the soldering iron to the molded ** For Case Size height ≤ 2.5 mm case. The iron should be used to heat the solder pad, applying solder between the pad and the termination, until T P t reflow occurs. Once reflow occurs, the iron should be Maximum Ramp-up Rate = 3°C/second P Maximum Ramp-down Rate = 6°C/second removed immediately. “Wiping” the edges of a chip and T heating the top surface is not recommended. re L tL u rat Tsmax e During typical reflow operations, a slight darkening of the mp T e smin t gold-colored epoxy may be observed. This slight darkening is T s normal and not harmful to the product. Marking permanency is not affected by this change. 25 25°C to Peak Time Storage Tantalum chip capacitors should be stored in normal working environments. While the chips themselves are quite robust in other environments, solderability will be degraded by exposure to high temperatures, high humidity, corrosive atmospheres, and long term storage. In addition, packaging materials will be degraded by high temperature – reels may soften or warp and tape peel force may increase. KEMET recommends that maximum storage temperature not exceed 40°C and maximum storage humidity not exceed 60% relative humidity. Temperature fluctuations should be minimized to avoid condensation on the parts and atmospheres should be free of chlorine and sulphur bearing compounds. For optimized solderability, chip stock should be used promptly, preferably within three years of receipt. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2054_T499_AUTO • 3/17/2020 99 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

Tantalum Surface Mount Capacitors – Automotive Grade T499 Automotive Grade MnO 175°C 2 Construction Molded Epoxy Polarity Stripe (+) Detailed Cross Section Case Silver Paint Polarity (Fourth Layer) Bevel (+) Tantalum Wire Leadframe (− Cathode) Washer Tantalum Wire Weld (to attach wire) Carbon (Third Layer) Washer Silver Adhesive TaO Dielectric 2 5 Molded Epoxy Leadframe MnO2 (First Layer) Case (+ Anode) (Second Layer) Tantalum Capacitor Marking Date Code * Polarity 1st digit = last number of year 6 = 2016 Indicator (+) 7 = 2017 8 = 2018 Picofarad 9 = 2019 Code 0 = 2020 2nd and 3rd digit = week of the 01 = 1st week of the year to Rated KEMET ID & High Voltage Temperature 175°C year 52 = 52nd week of the year Date Code* * 007 = 7th week of 2020 © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2054_T499_AUTO • 3/17/2020 1100 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

Tantalum Surface Mount Capacitors – Automotive Grade T499 Automotive Grade MnO 175°C 2 Tape & Reel Packaging Information KEMET’s molded chip capacitor families are packaged in 8 and 12 mm plastic tape on 7" and 13" reels in accordance with EIA Standard 481: Embossed Carrier Taping of Surface Mount Components for Automatic Handling. This packaging system is compatible with all tape-fed automatic pick-and-place systems. Right hand orientation only Embossed carrier (+) (−) Embossment Top tape thickness 0.10 mm (0.004”) 8 mm (0.315”) or 180 mm (7.0”) or maximum thickness 12 mm (0.472”) 330 mm (13.”) Table 3 – Packaging Quantity Tape Width Case Code 7" Reel* 13" Reel* (mm) KEMET EIA S 3216-12 8 2,500 10,000 T 3528-12 8 3,000 10,000 M 3528-15 8 2,500 8,000 U 6032-15 12 1,000 5,000 L 6032-19 12 1,000 3,000 W 7343-15 12 1,000 3,000 Z 7343-17 12 1,000 3,000 V 7343-20 12 1,000 3,000 A 3216-18 8 2,000 9,000 B 3528-21 8 2,000 8,000 C 6032-28 12 500 3,000 D 7343-31 12 500 2,500 Q 7343-12 12 1,000 3,000 Y 7343-40 12 500 2,000 X 7343-43 12 500 2,000 E/T428P 7360-38 12 500 2,000 H 7360-20 12 1,000 2,500 O 7360-43 12 250 1,000 * No C-Spec required for 7" reel packaging. C-7280 required for 13" reel packaging. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2054_T499_AUTO • 3/17/2020 1111 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

Tantalum Surface Mount Capacitors – Automotive Grade T499 Automotive Grade MnO 175°C 2 Figure 1 – Embossed (Plastic) Carrier Tape Dimensions T P 2 T2 ØD0 P0 t(o1l0e rpaintcchee osn c tuampuel a±0ti.v2e mm) E1 A 0 F K 0 W B1 B0 E2 S P 1 1 T1 Center Lines of Cavity ØD Embossment 1 For cavity size, Cover Tape see Note 1, Table 4 B is for tape feeder reference only, 1 including draft concentric about B0. User Direction of Unreeling Table 4 – Embossed (Plastic) Carrier Tape Dimensions Metric will govern Constant Dimensions — Millimeters (Inches) D Minimum R Reference S Minimum T Tape Size D 1 E P P 1 T Maximum 1 0 Note 1 1 0 2 Note 2 Note 3 Maximum 1.0 25.0 8 mm (0.039) (0.984) 1.5 +0.10/−0.0 1.75 ±0.10 4.0 ±0.10 2.0 ±0.05 0.600 0.600 0.100 (0.059 +0.004/−0.0) (0.069 ±0.004) (0.157 ±0.004) (0.079 ±0.002) (0.024) (0.024) (0.004) 1.5 30 12 mm (0.059) (1.181) Variable Dimensions — Millimeters (Inches) B Maximum Tape Size Pitch 1 E Minimum F P T Maximum W Maximum A, B & K Note 4 2 1 2 0 0 0 4.35 6.25 3.5 ±0.05 2.0 ±0.05 or 4.0 ±0.10 2.5 8.3 8 mm Single (4 mm) (0.171) (0.246) (0.138 ±0.002) (0.079 ±0.002 or 0.157 ±0.004) (0.098) (0.327) Single (4 mm) 2.0 ±0.05 (0.079 ±0.002) or Note 5 8.2 10.25 5.5 ±0.05 4.6 12.3 12 mm and Double 4.0 ±0.10 (0.157 ±0.004) or (0.323) (0.404) (0.217 ±0.002) (0.181) (0.484) (8 mm) 8.0 ±0.10 (0.315 ±0.004) 1. The embossment hole location shall be measured from the sprocket hole controlling the location of the embossment. Dimensions of embossment location and hole location shall be applied independent of each other. 2. The tape, with or without components, shall pass around R without damage (see Figure 4). 3. If S < 1.0 mm, there may not be enough area for cover tape to be properly applied (see EIA Standard 481–D, paragraph 4.3, section b). 1 4. B dimension is a reference dimension for tape feeder clearance only. 1 5. The cavity defi ned by A, B and K shall surround the component with suffi cient clearance that: 0 0 0 (a) the component does not protrude above the top surface of the carrier tape. (b) the component can be removed from the cavity in a vertical direction without mechanical restriction, after the top cover tape has been removed. (c) rotation of the component is limited to 20° maximum for 8 and 12 mm tapes (see Figure 2). (d) lateral movement of the component is restricted to 0.5 mm maximum for 8 mm and 12 mm wide tape (see Figure 3). (e) see Addendum in EIA Standard 481–D for standards relating to more precise taping requirements. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2054_T499_AUTO • 3/17/2020 1122 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

Tantalum Surface Mount Capacitors – Automotive Grade T499 Automotive Grade MnO 175°C 2 Packaging Information Performance Notes 1. Cover tape break force: 1.0 kg minimum. 2. Cover tape peel strength: The total peel strength of the cover tape from the carrier tape shall be: Tape Width Peel Strength 8 mm 0.1 to 1.0 newton (10 to 100 gf) 12 mm 0.1 to 1.3 newton (10 to 130 gf) The direction of the pull shall be opposite the direction of the carrier tape travel. The pull angle of the carrier tape shall be 165° to 180° from the plane of the carrier tape. During peeling, the carrier and/or cover tape shall be pulled at a velocity of 300 ±10 mm/minute. 3. Labeling: Bar code labeling (standard or custom) shall be on the side of the reel opposite the sprocket holes. Refer to EIA Standards 556 and 624. Figure 2 – Maximum Component Rotation ° T Maximum Component Rotation Maximum Component Rotation Top View Side View Typical Pocket Centerline Tape Maximum ° Width (mm) Rotation ( °) s T 8, 12 20 Bo Tape Maximum Width (mm) Rotation ( °) S 8, 12 20 Typical Component Centerline Ao Figure 3 – Maximum Lateral Movement Figure 4 – Bending Radius 8 mm & 12 mm Tape Embossed Punched Carrier Carrier 0.5 mm maximum 0.5 mm maximum Bending R R Radius © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2054_T499_AUTO • 3/17/2020 1133 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

Tantalum Surface Mount Capacitors – Automotive Grade T499 Automotive Grade MnO 175°C 2 Figure 5 – Reel Dimensions W Full Radius, (Includes Access Hole at 3 See Note Slot Location flange distortion (Ø 40 mm minimum) at outer edge) W (Measured at hub) 2 A D (See Note) N C (Arbor hole W (Measured at hub) diameter) 1 If present, tape slot in core for tape start: 2.5 mm minimum width x 10.0 mm minimum depth B (see Note) Note: Drive spokes optional; if used, dimensions B and D shall apply. Table 5 – Reel Dimensions Metric will govern Constant Dimensions — Millimeters (Inches) Tape Size A B Minimum C D Minimum 178 ±0.20 8 mm (7.008 ±0.008) 1.5 13.0 +0.5/−0.2 20.2 or (0.059) (0.521 +0.02/−0.008) (0.795) 12 mm 330 ±0.20 (13.000 ±0.008) Variable Dimensions — Millimeters (Inches) Tape Size N Minimum W W Maximum W 1 2 3 8.4 +1.5/−0.0 14.4 8 mm 50 (0.331 +0.059/−0.0) (0.567) Shall accommodate tape (1.969) 12.4 +2.0/−0.0 18.4 width without interference 12 mm (0.488 +0.078/−0.0) (0.724) © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2054_T499_AUTO • 3/17/2020 1144 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

Tantalum Surface Mount Capacitors – Automotive Grade T499 Automotive Grade MnO 175°C 2 Figure 6 – Tape Leader & Trailer Dimensions Embossed Carrier Punched Carrier Carrier Tape 8 mm & 12 mm only Round Sprocket Holes END START Top Cover Tape Elongated Sprocket Holes (32 mm tape and wider) 100 mm minimum Leader Trailer Components 400 mm minimum 160 mm minimum Top Cover Tape Figure 7 – Maximum Camber Elongated Sprocket Holes Carrier Tape (32 mm & wider tapes) Round Sprocket Holes 1 mm maximum, either direction Straight Edge 250 mm © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2054_T499_AUTO • 3/17/2020 1155 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

Tantalum Surface Mount Capacitors – Automotive Grade T499 Automotive Grade MnO 175°C 2 KEMET Electronics Corporation Sales Offi ces For a complete list of our global sales offi ces, please visit www.kemet.com/sales. Disclaimer All product specifi cations, statements, information and data (collectively, the “Information”) in this datasheet are subject to change. The customer is responsible for checking and verifying the extent to which the Information contained in this publication is applicable to an order at the time the order is placed. All Information given herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied. Statements of suitability for certain applications are based on KEMET Electronics Corporation’s (“KEMET”) knowledge of typical operating conditions for such applications, but are not intended to constitute – and KEMET specifi cally disclaims – any warranty concerning suitability for a specifi c customer application or use. The Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by KEMET with reference to the use of KEMET’s products is given gratis, and KEMET assumes no obligation or liability for the advice given or results obtained. Although KEMET designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage. Although all product–related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicted or that other measures may not be required. KEMET is a registered trademark of KEMET Electronics Corporation. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2054_T499_AUTO • 3/17/2020 1166 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com