Tantalum Surface Mount Capacitors – Low ESR T495 Surge Robust MnO 2 Overview The low ESR, surge-robust T495 is designed for These benefits are achieved through a combination of demanding applications that require high surge current proprietary design, materials, and process parameters, as and high ripple current capability. The T495 builds upon well as high-stress, low impedance electrical conditioning the proven capabilities of our industrial grade tantalum performed prior to screening.The T495 is classified as chip capacitors to offer several advantages such as low moisture sensitivity level (MSL) 1 under J STD 020, with ESR, high ripple current capability, excellent capacitance unlimited floorlife time at ≤ 30°C/85% RH. stability, and improved resistance to high in-rush currents. Benefits • Meets or exceeds EIA Standard 535BAAC • Tape & Reel standard packaging per EIA 481 • High surge current capability • Optional gold-plated terminations • High ripple current capability • 100% surge current test on B, C, D, E, U, V, and X sizes • 100% steady-state accelerated aging • Capacitance values of 0.1 – 1,000 μF • Tolerances of ±10% and ±20% • Voltage rating of 2.5 – 50 VDC • Extended range values • RoHS compliant and lead-free terminations • Operating temperature range of −55°C to +125°C Applications Typical applications include decoupling and filtering in automotive end applications, such as DC/DC converters, portable electronics, telecommunications, and control units requiring high ripple current capability. Environmental Compliance RoHS compliant (6/6) according to Directive 2002/95/EC when ordered with 100% Sn solder, Gold-plated or Non-magnetic 100% Sn solder. One world. One KEMET © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2009_T495 • 12/12/2019 1 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

Tantalum Surface Mount Capacitors – Low ESR T495 Surge Robust MnO 2 K-SIM For a detailed analysis of specific part numbers, please visit ksim.kemet.com to access KEMET’s K-SIM software. KEMET K-SIM is designed to simulate behavior of components with respect to frequency, ambient temperature, and DC bias levels. Ordering Information T 495 X 107 M 010 A T E045 Capacitor Case Capacitance Capacitance Rated Voltage Failure Rate/ Packaging Series Termination Finish ESR Class Size Code (pF) Tolerance (VDC) Design (C-Spec) T = Surge A, First two K = ±10% 2R5 = 2.5 A = N/A T = 100% Matte tin E = ESR Blank = 7" reel Tantalum Robust B, digits M = ±20% 004 = 4 (Sn)-plated last three 7280 = 13" reel Low C, represent 006 = 6.3 H = Standard solder digits specify ESR D, significant 010 = 10 coated ESR in mΩ E, figures. Third 016 = 16 (SnPb 5% Pb minimum) (45 = 45 mΩ) M, digit specifies 020 = 20 G = Gold-plated T, number of 025 = 25 (A, B, C, D, X only) U, zeros. 035 = 35 N = Non-magnetic 100% V, 050 = 50 tin (Sn) W, M = Non-magnetic (SnPb) X Performance Characteristics Item Performance Characteristics Operating Temperature −55°C to 125°C Rated Capacitance Range 0.47 – 1,000 µF at 120 Hz/25°C Capacitance Tolerance K tolerance (10%), M tolerance (20%) Rated Voltage Range 2.5 – 50 V DF (120 Hz) Refer to Part Number Electrical Specification Table ESR (100 kHz) Refer to Part Number Electrical Specification Table Leakage Current ≤ 0.01 CV (µA) at rated voltage after 5 minutes © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2009_T495 • 12/12/2019 2 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

Tantalum Surface Mount Capacitors – Low ESR T495 Surge Robust MnO 2 Qualification Test Condition Characteristics Δ C/C Within ±10% of initial value 85°C at rated voltage, 2,000 hours DF Within initial limits Endurance 125°C at 2/3 rated voltage, 2,000 hours DCL Within 1.25 x initial limit ESR Within initial limits Δ C/C Within ±10% of initial value DF Within initial limits Storage Life 125°C at 0 volts, 2,000 hours DCL Within 1.25 x initial limit ESR Within initial limits Δ C/C Within ±5% of initial value MIL–STD–202, Method 107, Condition B, mounted, DF Within initial limits Thermal Shock −55C° to 125°C, 1,000 cycles DCL Within 1.25 x initial limit ESR Within initial limits +25°C −55°C +85°C +125°C Extreme temperature exposure at a Δ C/C IL* ±10% ±10% ±20% Temperature Stability succession of continuous steps at +25°C, −55°C, +25°C, +85°C, +125°C, +25°C. DF IL IL 1.5 x IL 1.5 x IL DCL IL N/A 10 x IL 12 x IL Δ C/C Within ±5% of initial value 85°C, 1.32 x rated voltage 1,000 cycles DF Within initial limits Surge Voltage (125°C, 1.2 x rated voltage) DCL Within initial limits ESR Within initial limits Δ C/C Within ±10% of initial value MIL–STD–202, Method 213, Condition I, 100 G peak Mechanical Shock/ MIL–STD–202, Method 204, Condition D, 10 Hz to 2,000 DF Within initial limits Vibration Hz, 20 G peak DCL Within initial limits *IL = Initial limit Electrical Characteristics ESR vs. Frequency Capacitance vs. Frequency 100 1,000 T495C476M016ATE350_IMP T495C476M016ATE350 s) T495D157M016ATE085_IMP T495D157M016ATE085 R (Ohm 10 TTT444999555XCD214257776MMM000111666AAATTTEEE103085050___IEEMSSPRR (μF) 100 T495X227M016ATE100 e, ES1 T495X227M016ATE100_ESR ance danc pacit e a p C 10 m I 0.1 0.01 1 100 1,000 10,000 100,000 1,000,000 10,000,000 100 1,000 10,000 100,000 1,000,000 10,000,000 Frequency ( Hz) Frequency ( Hz) © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2009_T495 • 12/12/2019 3 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

Tantalum Surface Mount Capacitors – Low ESR T495 Surge Robust MnO 2 Dimensions – Millimeters (Inches) Metric will govern CATHODE (-) END VIEW SIDE VIEW ANODE (+) END VIEW BOTTOM VIEW A W B B Glue pad H E shape/design at F KEMET's option P Termination cutout X T S G S at KEeMitEhTer's e onpdtion, R L Typical Case Size Component Weight B ±0.15 F ±0.1 P R T A G E KEMET EIA L W H S (Ref) X (Ref) (mg) ±(0.004) (Ref) (Ref) (Ref) (Min) (Ref) (Ref) ±0.006 1.6 ±0.2 0.80 (0.032) A 3216–18 3.2 ±0.2 (0.063 1.6 ±0.2 1.2 +0.2 (0.008) 0.4 0.10 ±0.10 0.4 0.4 0.13 1.2 1.1 1.3 58.60 (0.126 ±0.008) (0.063 ±0.008) (0.047) (0.016) (0.004 ±0.004)(0.016) (0.016)(0.005)(0.047)(0.043)(0.051) ±0.008) /−0.3(0.011) 0.80 (0.032) B 3528–21 3.5 ±0.2 2.8 ±0.2 1.9 ±0.2 2.2 +0.1 (0.004) 0.4 0.10 ±0.10 0.5 1.0 0.13 1.9 1.8 2.2 107.45 (0.138 ±0.008)(0.110 ±0.008)(0.075 ±0.008) (0.087) (0.016) (0.004 ±0.004)(0.020)(0.039)(0.005)(0.075)(0.071)(0.087) /−0.3(0.011) M 3528-15 3.5 ±0.2 2.8 ±0.2 1.5 2.2 0.8 (0.031) N/A 0.05 N/A N/A 0.13 1.9 1.8 2.2 97.99 (0.138 ±0.008)(0.110 ±0.008) (0.059) (0.087) ±0.3 (0.012) (0.002) (0.005)(0.075)(0.071)(0.087) C 6032–28 6.0 ±0.3 3.2 ±0.3 2.5 ±0.3 2.2 1.3 (0.051) 0.5 0.10 ±0.10 0.9 1.0 0.13 2.9 2.8 2.4 224.48 (0.236 ±0.012)(0.126 ±0.012)(0.098 ±0.012) (0.087) ±0.3 (0.012) (0.020) (0.004 ±0.004)(0.035)(0.039)(0.005) (0.114) (0.110) (0.094) U 6032-15 6.0 ±0.3 3.2 ±0.2 1.5 2.2 1.3 (0.051) N/A 0.05 N/A N/A 0.13 2.9 2.8 2.4 70.00 (0.236 ±0.012)(0.110 ±0.008) (0.059) (0.087) ±0.3 (0.012) (0.002) (0.005) (0.114) (0.110) (0.094) D 7343–31 7.3 ±0.3 4.3 ±0.3 2.8 ±0.3 2.4 1.3 (0.051) 0.5 0.10 ±0.10 0.9 1.0 0.13 3.6 3.5 3.5 446.84 (0.287 ±0.012)(0.169 ±0.012)(0.110 ±0.012) (0.094) ±0.3 (0.012) (0.020) (0.004 ±0.004)(0.035)(0.039)(0.005)(0.142) (0.138) (0.138) W 7343-15 7.3 ±0.3 4.3 ±0.3 1.5 2.4 1.3 (0.051) N/A 0.05 N/A N/A 0.13 3.6 3.5 3.5 248.27 (0.287 ±0.012)(0.169 ±0.012) (0.059) (0.094) ±0.3 (0.012) (0.002) (0.005)(0.142) (0.138) (0.138) X 7343-43 7.3 ±0.3 4.3 ±0.3 4.0 ±0.3 2.4 1.3 (0.051) 0.5 0.10 ±0.10 1.7 1.0 0.13 3.6 3.5 3.5 652.04 (0.287 ±0.012)(0.169 ±0.012)(0.157 ±0.012) (0.094) ±0.3 (0.012) (0.020) (0.004 ±0.004)(0.067)(0.039)(0.005)(0.142) (0.138) (0.138) 6.0 ±0.3 E 7360-38 7.3 ±0.3 (0.236 3.6 ±0.2 4.1 1.3 (0.051) 0.5 0.10 ±0.10 N/A N/A 0.13 3.6 3.5 3.5 803.76 (0.287 ±0.012) (0.142 ±0.008) (0.161) ±0.3 (0.012) (0.020) (0.004 ±0.004) (0.005)(0.142) (0.138) (0.138) ±0.012) 0.80 (0.032) T 3528-12 3.5 ±0.2 2.8 ±0.2 1.2 2.2 +0.1 (0.004) N/A 0.05 N/A N/A 0.13 1.9 1.8 2.2 63.89 (0.138 ±0.008)(0.110 ±0.008) (0.047) (0.087) (0.002) (0.005)(0.075)(0.071)(0.087) /−0.3(0.011) V 7343-20 7.3 ±0.3 4.3 ±0.3 2.0 2.4 1.3 (0.051) N/A 0.05 N/A N/A 0.13 3.6 3.5 3.5 286.40 (0.287 ±0.012)(0.169 ±0.012) (0.079) (0.094) ±0.3 (0.012) (0.002) (0.005)(0.142) (0.138) (0.138) Notes: (Ref) – Dimensions provided for reference only. For low profile cases, no dimensions are provided for B, P, or R because these cases do not have a bevel or a notch. These weights are provided as reference. If exact weights are needed, please contact your KEMET Sales Representative © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2009_T495 • 12/12/2019 4 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

Tantalum Surface Mount Capacitors – Low ESR T495 Surge Robust MnO 2 Table 1 – Ratings & Part Number Reference Case Maximum Rated Rated KEMET Part DC Maximum Allowable Code/ DF ESR Operating MSL Voltage Cap Number Leakage Ripple Current (rms) Case Size Temp mΩ at 20°C mA at mA at mA at Reflow (See below for µA +20°C % at +20°C VDC at 85°C µF KEMET/EIA 100 kHz +25°C 100 +85°C 100 +125°C 100 °C Temp part options) Max/5 Min 120 Hz Max Max kHz kHz kHz ≤ 260°C 2.5 220 D/7343-31 T495D227(1)2R5A(2)E045 5.5 8.0 45 1826 1643 730 125 1 2.5 470 D/7343-31 T495D477(1)2R5A(2)E035 11.8 8.0 35 2070 1863 828 125 1 2.5 1000 X/7343-43 T495X108(1)2R5A(2)E030 25.0 15.0 30 2345 2111 938 125 1 2.5 1000 X/7343-43 T495X108(1)2R5A(2)E040 25.0 15.0 40 2031 1828 812 125 1 4 6.8 A/3216-18 T495A685(1)004A(2)E2K0 0.5 6.0 2,000 194 175 78 125 1 4 22 C/6032-28 T495C226(1)004A(2)E2K4 0.9 6.0 2,400 214 193 86 125 1 4 22 C/6032-28 T495C226(1)004A(2)E380 0.9 6.0 380 538 484 215 125 1 4 33 T/3528-12 T495T336(1)004A(2)E1K2 1.3 8.0 1,200 242 218 97 125 1 4 68 T/3528-12 T495T686(1)004A(2)E1K5 2.7 20.0 1,500 216 194 86 125 1 4 68 V/7343-20 T495V686(1)004A(2)E150 2.7 6.0 150 913 822 365 125 1 4 100 B/3528-21 T495B107(1)004A(2)E500 4.0 8.0 500 412 371 165 125 1 4 100 D/7343-31 T495D107(1)004A(2)E800 4.0 6.0 800 433 390 173 125 1 4 150 B/3528-21 T495B157(M)004A(2)E900 6.0 12.0 900 307 276 123 125 1 4 150 C/6032-28 T495C157(1)004A(2)E070 6.0 12.0 70 1254 1129 502 125 1 4 150 C/6032-28 T495C157(1)004A(2)E250 6.0 8.0 250 663 597 265 125 1 4 150 U/6032-15 T495U157(1)004A(2)E200 6.0 8.0 200 671 604 268 125 1 4 220 D/7343-31 T495D227(1)004A(2)E040 8.8 8.0 40 1936 1742 774 125 1 4 220 D/7343-31 T495D227(1)004A(2)E050 8.8 8.0 50 1732 1559 693 125 1 4 220 D/7343-31 T495D227(1)004A(2)E100 8.8 8.0 100 1225 1103 490 125 1 4 330 C/6032-28 T495C337(1)004A(2)E300 13.2 10.0 300 606 545 242 125 1 4 330 C/6032-28 T495C337(1)004A(2)E700 13.2 12.0 700 396 356 158 125 1 4 330 D/7343-31 T495D337(1)004A(2)E030 13.2 8.0 30 2236 2012 894 125 1 4 330 D/7343-31 T495D337(1)004A(2)E045 13.2 8.0 45 1826 1643 730 125 1 4 330 D/7343-31 T495D337(1)004A(2)E100 13.2 8.0 100 1225 1103 490 125 1 4 470 D/7343-31 T495D477(1)004A(2)E045 18.8 12.0 45 1826 1643 730 125 1 4 470 D/7343-31 T495D477(1)004A(2)E100 18.8 12.0 100 1225 1103 490 125 1 4 470 X/7343-43 T495X477(1)004A(2)E030 18.8 8.0 30 2345 2111 938 125 1 4 470 X/7343-43 T495X477(1)004A(2)E045 18.8 8.0 45 1915 1724 766 125 1 4 470 X/7343-43 T495X477(1)004A(2)E060 18.8 10.0 60 1658 1492 663 125 1 4 470 X/7343-43 T495X477(1)004A(2)E100 18.8 8.0 100 1285 1157 514 125 1 4 680 X/7343-43 T495X687(1)004A(2)E040 27.2 10.0 40 2031 1828 812 125 1 4 680 X/7343-43 T495X687(1)004A(2)E060 27.2 10.0 60 1658 1492 663 125 1 4 680 X/7343-43 T495X687(1)004A(2)E100 27.2 10.0 100 1285 1157 514 125 1 4 1000 X/7343-43 T495X108(1)004A(2)E030 40.0 10.0 30 2345 2111 938 125 1 4 1000 X/7343-43 T495X108(1)004A(2)E040 40.0 10.0 40 2031 1828 812 125 1 4 1000 X/7343-43 T495X108(1)004A(2)E060 40.0 10.0 60 1658 1492 663 125 1 4 1000 X/7343-43 T495X108(1)004A(2)E070 40.0 10.0 70 1535 1382 614 125 1 4 1000 X/7343-43 T495X108(1)004A(2)E090 40.0 10.0 90 1354 1219 542 125 1 4 1000 X/7343-43 T495X108(1)004A(2)E100 40.0 10.0 100 1285 1157 514 125 1 4 1000 E/7360-38 T495E108(1)004A(2)E035 40.0 15.0 35 2390 2151 956 125 1 4 1000 E/7360-38 T495E108(1)004A(2)E050 40.0 15.0 50 2000 1800 800 125 1 6.3 2 A/3216-18 T495A225(1)006ATE5K0 0.5 6.0 5,000 122 110 49 125 1 6.3 3 A/3216-18 T495A335(1)006ATE3K0 0.5 6.0 3,000 158 142 63 125 1 6.3 7 A/3216-18 T495A685(1)006ATE1K8 0.5 6.0 1,800 204 184 82 125 1 6.3 6.8 A/3216-18 T495A685(1)006ATE2K0 0.5 6.0 2,000 194 175 78 125 1 mΩ at 20°C mA at mA at Reflow (See below for µA +20°C % at +20°C mA at +25°C VDC at 85°C µF KEMET/EIA 100 kHz +85°C 100 +125°C 100 °C Temp part options) Max/5 Min 120 Hz Max 100 kHz Max kHz kHz ≤ 260°C Maximum Rated Rated Case Code/ DC Maximum Allowable KEMET Part Number DF ESR Operating MSL Voltage Cap Case Size Leakage Ripple Current (rms) Temp (1) To complete KEMET part number, insert M for ±20% or K for ±10%. Designates capacitance tolerance. (2) To complete KEMET part number, insert T = 100% Matte Tin (Sn) Plated, G = Gold Plated, H = Standard Solder coated (SnPb 5% Pb minimum), N = Non-Magnetic 100% Tin (Sn) or M = Non-Magnetic (SnPb). Designates termination finish. Refer to Ordering Information for additional detail. Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitution will be marked with the higher voltage rating. Substitutions can include better than series. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2009_T495 • 12/12/2019 5 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

Tantalum Surface Mount Capacitors – Low ESR T495 Surge Robust MnO 2 Table 1 – Ratings & Part Number Reference cont. Case Maximum Rated Rated KEMET Part DC Maximum Allowable Code/ DF ESR Operating MSL Voltage Cap Number Leakage Ripple Current (rms) Case Size Temp mΩ at 20°C mA at mA at mA at Reflow (See below for µA +20°C % at +20°C VDC at 85°C µF KEMET/EIA 100 kHz +25°C 100 +85°C 100 +125°C 100 °C Temp part options) Max/5 Min 120 Hz Max Max kHz kHz kHz ≤ 260°C 6.3 6.8 A/3216-18 T495A685(1)006A(2)E4K5 0.5 6.0 4,500 129 116 52 125 1 6.3 6.8 C/6032-28 T495C685(1)006A(2)E480 0.5 6.0 480 479 431 192 125 1 6.3 10 A/3216-18 T495A106(1)006A(2)E800 0.6 6.0 800 306 275 122 125 1 6.3 10 A/3216-18 T495A106(1)006A(2)E1K0 0.6 6.0 1,000 274 247 110 125 1 6.3 10 A/3216-18 T495A106(1)006A(2)E1K5 0.6 6.0 1,500 224 202 90 125 1 6.3 10 A/3216-18 T495A106(1)006A(2)E2K0 0.6 6.0 2,000 194 175 78 125 1 6.3 10 B/3528-21 T495B106(1)006A(2)E1K0 0.6 6.0 1,000 292 263 117 125 1 6.3 10 T/3528-12 T495T106(1)006A(2)E1K2 0.6 6.0 1,200 242 218 97 125 1 6.3 15 A/3216-18 T495A156(1)006A(2)E2K0 0.9 6.0 2,000 194 175 78 125 1 6.3 15 T/3528-12 T495T156(1)006A(2)E1K0 0.9 6.0 1,000 265 239 106 125 1 6.3 22 A/3216-18 T495A226(1)006A(2)E500 1.4 6.0 500 387 348 155 125 1 6.3 22 A/3216-18 T495A226(1)006A(2)E900 1.4 8.0 900 289 260 116 125 1 6.3 22 A/3216-18 T495A226(1)006A(2)E1K5 1.4 8.0 1,500 224 202 90 125 1 6.3 22 B/3528-21 T495B226(1)006A(2)E500 1.4 6.0 500 412 371 165 125 1 6.3 22 C/6032-28 T495C226(1)006A(2)E380 1.4 6.0 380 538 484 215 125 1 6.3 33 A/3216-18 T495A336(1)006A(2)E600 2.1 12.0 600 354 319 142 125 1 6.3 33 B/3528-21 T495B336(1)006A(2)E600 2.1 6.0 600 376 338 150 125 1 6.3 33 T/3528-12 T495T336(1)006A(2)E800 2.1 6.0 800 296 266 118 125 1 6.3 33 C/6032-28 T495C336(1)006A(2)E350 2.1 6.0 350 561 505 224 125 1 6.3 47 B/3528-21 T495B476(1)006A(2)E250 3.0 6.0 250 583 525 233 125 1 6.3 47 B/3528-21 T495B476(1)006A(2)E400 3.0 6.0 400 461 415 184 125 1 6.3 47 B/3528-21 T495B476(1)006A(2)E450 3.0 6.0 450 435 392 174 125 1 6.3 47 B/3528-21 T495B476(1)006A(2)E500 3.0 6.0 500 583 525 233 125 1 6.3 47 C/6032-28 T495C476(1)006A(2)E250 3.0 6.0 250 663 597 265 125 1 6.3 47 C/6032-28 T495C476(1)006A(2)E300 3.0 6.0 300 606 545 242 125 1 6.3 47 C/6032-28 T495C476(1)006A(2)E330 3.0 6.0 330 577 519 231 125 1 6.3 47 V/7343-20 T495V476(1)006A(2)E150 3.0 6.0 150 913 822 365 125 1 6.3 68 B/3528-21 T495B686(1)006A(2)E500 4.3 8.0 500 412 371 165 125 1 6.3 68 C/6032-28 T495C686(1)006A(2)E400 4.3 6.0 400 524 472 210 125 1 6.3 68 U/6032-15 T495U686(1)006A(2)E400 4.3 6.0 400 474 427 190 125 1 6.3 68 D/7343-31 T495D686(1)006A(2)E175 4.3 4.0 175 926 833 370 125 1 6.3 68 D/7343-31 T495D686(1)006A(2)E180 4.3 4.0 180 913 822 365 125 1 6.3 100 B/3528-21 T495B107(1)006A(2)E400 6.3 15.0 400 461 415 184 125 1 6.3 100 B/3528-21 T495B107(M)006A(2)E700 6.3 15.0 700 348 313 139 125 1 6.3 100 M/3528-15 T495M107(1)006A(2)E500 6.3 20.0 500 490 441 196 125 1 6.3 100 M/3528-15 T495M107(1)006A(2)E1K0 6.3 20.0 1,000 346 311 138 125 1 6.3 100 C/6032-28 T495C107(1)006A(2)E075 6.3 8.0 75 1211 1090 484 125 1 6.3 100 C/6032-28 T495C107(1)006A(2)E150 6.3 8.0 150 856 770 342 125 1 6.3 100 D/7343-31 T495D107(1)006A(2)E050 6.3 6.0 50 1732 1559 693 125 1 6.3 100 D/7343-31 T495D107(1)006A(2)E130 6.3 6.0 130 1074 967 430 125 1 6.3 100 D/7343-31 T495D107(1)006A(2)E150 6.3 8.0 150 1000 900 400 125 1 6.3 100 D/7343-31 T495D107(1)006A(2)E800 6.3 6.0 800 433 390 173 125 1 6.3 100 V/7343-20 T495V107(1)006A(2)E090 6.3 8.0 90 1179 1061 472 125 1 6.3 100 V/7343-20 T495V107(1)006A(2)E150 6.3 8.0 150 913 822 365 125 1 6.3 150 B/3528-21 T495B157(1)006A(2)E800 9.5 6.0 800 326 293 130 125 1 mΩ at 20°C mA at mA at Reflow (See below for µA +20°C % at +20°C mA at +25°C VDC at 85°C µF KEMET/EIA 100 kHz +85°C 100 +125°C 100 °C Temp part options) Max/5 Min 120 Hz Max 100 kHz Max kHz kHz ≤ 260°C Maximum Rated Rated Case Code/ DC Maximum Allowable KEMET Part Number DF ESR Operating MSL Voltage Cap Case Size Leakage Ripple Current (rms) Temp (1) To complete KEMET part number, insert M for ±20% or K for ±10%. Designates capacitance tolerance. (2) To complete KEMET part number, insert T = 100% Matte Tin (Sn) Plated, G = Gold Plated, H = Standard Solder coated (SnPb 5% Pb minimum), N = Non-Magnetic 100% Tin (Sn) or M = Non-Magnetic (SnPb). Designates termination finish. Refer to Ordering Information for additional detail. Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitution will be marked with the higher voltage rating. Substitutions can include better than series. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2009_T495 • 12/12/2019 6 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

Tantalum Surface Mount Capacitors – Low ESR T495 Surge Robust MnO 2 Table 1 – Ratings & Part Number Reference cont. Case Maximum Rated Rated KEMET Part DC Maximum Allowable Code/ DF ESR Operating MSL Voltage Cap Number Leakage Ripple Current (rms) Case Size Temp mΩ at 20°C mA at mA at mA at Reflow (See below for µA +20°C % at +20°C VDC at 85°C µF KEMET/EIA 100 kHz +25°C 100 +85°C 100 +125°C 100 °C Temp part options) Max/5 Min 120 Hz Max Max kHz kHz kHz ≤ 260°C 6.3 150 C/6032-28 T495C157(1)006A(2)E050 9.5 8.0 50 1483 1335 593 125 1 6.3 150 C/6032-28 T495C157(M)006A(2)E200 9.5 8.0 200 742 668 297 125 1 6.3 150 U/6032-15 T495U157(1)006A(2)E200 9.5 8.0 200 671 604 268 125 1 6.3 150 V/7343-20 T495V157(1)006A(2)E040 9.5 8.0 40 1768 1591 707 125 1 6.3 150 V/7343-20 T495V157(1)006A(2)E070 9.5 8.0 70 1336 1202 534 125 1 6.3 150 V/7343-20 T495V157(1)006A(2)E150 9.5 8.0 150 913 822 365 125 1 6.3 150 D/7343-31 T495D157(1)006A(2)E050 9.5 6.0 50 1732 1559 693 125 1 6.3 150 D/7343-31 T495D157(1)006A(2)E065 9.5 6.0 65 1519 1367 608 125 1 6.3 150 D/7343-31 T495D157(1)006A(2)E080 9.5 6.0 80 1369 1232 548 125 1 6.3 150 D/7343-31 T495D157(1)006A(2)E100 9.5 6.0 100 1225 1103 490 125 1 6.3 150 D/7343-31 T495D157(1)006A(2)E125 9.5 6.0 125 1095 986 438 125 1 6.3 150 X/7343-43 T495X157(1)006A(2)E100 9.5 6.0 100 1285 1157 514 125 1 6.3 220 C/6032-28 T495C227(1)006A(2)E225 13.9 10.0 225 699 629 280 125 1 6.3 220 C/6032-28 T495C227(1)006A(2)E200 13.9 10.0 200 742 668 297 125 1 6.3 220 C/6032-28 T495C227(1)006A(2)E100 13.9 10.0 100 1049 944 420 125 1 6.3 220 D/7343-31 T495D227(1)006A(2)E045 13.9 8.0 45 1826 1643 730 125 1 6.3 220 D/7343-31 T495D227(1)006A(2)E050 13.9 8.0 50 1732 1559 693 125 1 6.3 220 D/7343-31 T495D227(1)006A(2)E100 13.9 8.0 100 1225 1103 490 125 1 6.3 220 W/7343-15 T495W227(1)006A(2)E250 13.9 8.0 250 849 764 340 125 1 6.3 220 X/7343-43 T495X227(1)006A(2)E070 13.9 8.0 70 1535 1382 614 125 1 6.3 220 X/7343-43 T495X227(1)006A(2)E080 13.9 8.0 80 1436 1292 574 125 1 6.3 220 X/7343-43 T495X227(1)006A(2)E100 13.9 8.0 100 1285 1157 514 125 1 6.3 220 V/7343-20 T495V227(1)006ATE150 13.9 8.0 150 913 822 365 125 1 6.3 330 C/6032-28 T495C337(1)006A(2)E200 20.8 18.0 200 742 668 297 125 1 6.3 330 D/7343-31 T495D337(1)006A(2)E040 20.8 8.0 40 1936 1742 774 125 1 6.3 330 D/7343-31 T495D337(1)006A(2)E045 20.8 8.0 45 1826 1643 730 125 1 6.3 330 D/7343-31 T495D337(1)006A(2)E050 20.8 8.0 50 1732 1559 693 125 1 6.3 330 D/7343-31 T495D337(1)006A(2)E070 20.8 8.0 70 1464 1318 586 125 1 6.3 330 D/7343-31 T495D337(1)006A(2)E100 20.8 8.0 100 1225 1103 490 125 1 6.3 330 V/7343-20 T495V337(1)006A(2)E150 20.8 8.0 150 913 822 365 125 1 6.3 330 X/7343-43 T495X337(1)006A(2)E045 20.8 8.0 45 1915 1724 766 125 1 6.3 330 X/7343-43 T495X337(1)006A(2)E050 20.8 8.0 50 1817 1635 727 125 1 6.3 330 X/7343-43 T495X337(1)006A(2)E065 20.8 8.0 65 1593 1434 637 125 1 6.3 330 X/7343-43 T495X337(1)006A(2)E080 20.8 8.0 80 1436 1292 574 125 1 6.3 330 X/7343-43 T495X337(1)006A(2)E100 20.8 8.0 100 1285 1157 514 125 1 6.3 330 E/7360-38 T495E337(1)006A(2)E060 20.8 8.0 60 1826 1643 730 125 1 6.3 330 E/7360-38 T495E337(1)006A(2)E100 20.8 8.0 100 1414 1273 566 125 1 6.3 470 D/7343-31 T495D477(1)006A(2)E045 29.6 12.0 45 1826 1643 730 125 1 6.3 470 D/7343-31 T495D477(1)006A(2)E100 29.6 12.0 100 1225 1103 490 125 1 6.3 470 D/7343-31 T495D477(1)006A(2)E125 29.6 12.0 125 1095 986 438 125 1 6.3 470 D/7343-31 T495D477(1)006A(2)E150 29.6 12.0 150 1000 900 400 125 1 6.3 470 V/7343-20 T495V477(1)006A(2)E150 29.6 15.0 150 913 822 365 125 1 6.3 470 X/7343-43 T495X477(1)006A(2)E030 29.6 10.0 30 2345 2111 938 125 1 6.3 470 X/7343-43 T495X477(1)006A(2)E045 29.6 10.0 45 1915 1724 766 125 1 6.3 470 X/7343-43 T495X477(1)006A(2)E050 29.6 10.0 50 1817 1635 727 125 1 mΩ at 20°C mA at mA at Reflow (See below for µA +20°C % at +20°C mA at +25°C VDC at 85°C µF KEMET/EIA 100 kHz +85°C 100 +125°C 100 °C Temp part options) Max/5 Min 120 Hz Max 100 kHz Max kHz kHz ≤ 260°C Maximum Rated Rated Case Code/ DC Maximum Allowable KEMET Part Number DF ESR Operating MSL Voltage Cap Case Size Leakage Ripple Current (rms) Temp (1) To complete KEMET part number, insert M for ±20% or K for ±10%. Designates capacitance tolerance. (2) To complete KEMET part number, insert T = 100% Matte Tin (Sn) Plated, G = Gold Plated, H = Standard Solder coated (SnPb 5% Pb minimum), N = Non-Magnetic 100% Tin (Sn) or M = Non-Magnetic (SnPb). Designates termination finish. Refer to Ordering Information for additional detail. Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitution will be marked with the higher voltage rating. Substitutions can include better than series. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2009_T495 • 12/12/2019 7 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

Tantalum Surface Mount Capacitors – Low ESR T495 Surge Robust MnO 2 Table 1 – Ratings & Part Number Reference cont. Case Maximum Rated Rated KEMET Part DC Maximum Allowable Code/ DF ESR Operating MSL Voltage Cap Number Leakage Ripple Current (rms) Case Size Temp mΩ at 20°C mA at mA at mA at Reflow (See below for µA +20°C % at +20°C VDC at 85°C µF KEMET/EIA 100 kHz +25°C 100 +85°C 100 +125°C 100 °C Temp part options) Max/5 Min 120 Hz Max Max kHz kHz kHz ≤ 260°C 6.3 470 X/7343-43 T495X477(1)006A(2)E060 29.6 10.0 60 1658 1492 663 125 1 6.3 470 X/7343-43 T495X477(1)006A(2)E065 29.6 10.0 65 1593 1434 637 125 1 6.3 470 X/7343-43 T495X477(1)006A(2)E100 29.6 10.0 100 1285 1157 514 125 1 6.3 470 X/7343-43 T495X477(1)006A(2)E125 29.6 10.0 125 1149 1034 460 125 1 6.3 470 E/7360-38 T495E477(1)006A(2)E040 29.6 12.0 40 2236 2012 894 125 1 6.3 470 E/7360-38 T495E477(1)006A(2)E055 29.6 10.0 55 1907 1716 763 125 1 6.3 470 E/7360-38 T495E477(1)006A(2)E100 29.6 10.0 100 1414 1273 566 125 1 6.3 680 X/7343-43 T495X687(1)006A(2)E100 42.8 12.0 100 1285 1157 514 125 1 6.3 680 X/7343-43 T495X687(1)006A(2)E060 42.8 12.0 60 1658 1492 663 125 1 6.3 680 X/7343-43 T495X687(1)006A(2)E045 42.8 12.0 45 1915 1724 766 125 1 6.3 1,000 X/7343-43 T495X108(1)006A(2)E100 63.0 20.0 100 1285 1157 514 125 1 6.3 1000 E/7360-38 T495E108(1)006A(2)E050 63.0 15.0 50 2000 1800 800 125 1 6.3 1,000 E/7360-38 T495E108(1)006A(2)E040 63.0 15.0 40 2236 2012 894 125 1 10 2 A/3216-18 T495A225(1)010A(2)E1K8 0.5 6.0 1,800 204 184 82 125 1 10 2 A/3216-18 T495A225(1)010A(2)E7K0 0.5 6.0 7,000 104 94 42 125 1 10 3 A/3216-18 T495A335(1)010A(2)E2K0 0.5 6.0 2,000 194 175 78 125 1 10 5 A/3216-18 T495A475(1)010A(2)E1K2 0.5 6.0 1,200 250 225 100 125 1 10 4.7 A/3216-18 T495A475(1)010A(2)E1K3 0.5 6.0 1,300 240 216 96 125 1 10 4.7 A/3216-18 T495A475(1)010A(2)E1K4 0.5 6.0 1,400 231 208 92 125 1 10 4.7 A/3216-18 T495A475(1)010A(2)E1K8 0.5 6.0 1,800 204 184 82 125 1 10 4.7 A/3216-18 T495A475(1)010A(2)E2K0 0.5 6.0 2,000 194 175 78 125 1 10 4.7 B/3528-21 T495B475(1)010A(2)E1K3 0.5 15.0 1,300 256 230 102 125 1 10 4.7 B/3528-21 T495B475(1)010A(2)E1K5 0.5 6.0 1,500 238 214 95 125 1 10 6.8 A/3216-18 T495A685(1)010A(2)E1K8 0.7 6.0 1,800 204 184 82 125 1 10 6.8 B/3528-21 T495B685(1)010A(2)E900 0.7 6.0 900 307 276 123 125 1 10 6.8 B/3528-21 T495B685(1)010A(2)E1K1 0.7 6.0 1,100 278 250 111 125 1 10 6.8 B/3528-21 T495B685(1)010A(2)E1K2 0.7 6.0 1,200 266 239 106 125 1 10 10 A/3216-18 T495A106(1)010A(2)E1K8 1.0 6.0 1,800 204 184 82 125 1 10 10 A/3216-18 T495A106(1)010A(2) E2K0 1.0 6.0 2,000 194 175 78 125 1 10 10 A/3216-18 T495A106(1)010A(2) E2K5 1.0 6.0 2,500 173 156 69 125 1 10 10 A/3216-18 T495A106(1)010A(2) E3K8 1.0 6.0 3,800 140 126 56 125 1 10 10 B/3528-21 T495B106(1)010A(2) E600 1.0 6.0 600 376 338 150 125 1 10 10 B/3528-21 T495B106(1)010A(2)E750 1.0 6.0 750 337 303 135 125 1 10 10 B/3528-21 T495B106(1)010A(2) E1K2 1.0 6.0 1,200 266 239 106 125 1 10 10 B/3528-21 T495B106(1)010A(2)E3K0 1.0 6.0 3,000 168 151 67 125 1 10 10 C/6032-28 T495C106(1)010AT E400 1.0 6.0 400 524 472 210 125 1 10 10 T/3528-12 T495T106(1)010AT E1K5 1.0 6.0 1,500 216 194 86 125 1 10 15 A/3216-18 T495A156(1)010AT E1K0 1.5 6.0 1,000 274 247 110 125 1 10 15 A/3216-18 T495A156(1)010AT E1K8 1.5 6.0 1,800 204 184 82 125 1 10 15 B/3528-21 T495B156(1)010AT E600 1.5 6.0 600 376 338 150 125 1 10 15 B/3528-21 T495B156(1)010AT E900 1.5 6.0 900 307 276 123 125 1 10 15 T/3528-12 T495T156(1)010AT E1K2 1.5 6.0 1,200 242 218 97 125 1 10 15 B/3528-21 T495B156(1)010A(2)E500 1.5 6.0 500 412 371 165 125 1 10 15 C/6032-28 T495C156(1)010A(2)E375 1.5 6.0 375 542 488 217 125 1 10 15 C/6032-28 T495C156(1)010A(2)E400 1.5 6.0 400 524 472 210 125 1 mΩ at 20°C mA at mA at Reflow (See below for µA +20°C % at +20°C mA at +25°C VDC at 85°C µF KEMET/EIA 100 kHz +85°C 100 +125°C 100 °C Temp part options) Max/5 Min 120 Hz Max 100 kHz Max kHz kHz ≤ 260°C Maximum Rated Rated Case Code/ DC Maximum Allowable KEMET Part Number DF ESR Operating MSL Voltage Cap Case Size Leakage Ripple Current (rms) Temp (1) To complete KEMET part number, insert M for ±20% or K for ±10%. Designates capacitance tolerance. (2) To complete KEMET part number, insert T = 100% Matte Tin (Sn) Plated, G = Gold Plated, H = Standard Solder coated (SnPb 5% Pb minimum), N = Non-Magnetic 100% Tin (Sn) or M = Non-Magnetic (SnPb). Designates termination finish. Refer to Ordering Information for additional detail. Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitution will be marked with the higher voltage rating. Substitutions can include better than series. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2009_T495 • 12/12/2019 8 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

Tantalum Surface Mount Capacitors – Low ESR T495 Surge Robust MnO 2 Table 1 – Ratings & Part Number Reference cont. Case Maximum Rated Rated KEMET Part DC Maximum Allowable Code/ DF ESR Operating MSL Voltage Cap Number Leakage Ripple Current (rms) Case Size Temp mΩ at 20°C mA at mA at mA at Reflow (See below for µA +20°C % at +20°C VDC at 85°C µF KEMET/EIA 100 kHz +25°C 100 +85°C 100 +125°C 100 °C Temp part options) Max/5 Min 120 Hz Max Max kHz kHz kHz ≤ 260°C 10 15 C/6032-28 T495C156(1)010A(2)E475 1.5 6.0 475 481 433 192 125 1 10 22 A/3216-18 T495A226(1)010AT E1K2 2.2 8.0 1,200 250 225 100 125 1 10 22 A/3216-18 T495A226(1)010AT E1K5 2.2 8.0 1,500 224 202 90 125 1 10 22 B/3528-21 T495B226(1)010AT E400 2.2 6.0 400 461 415 184 125 1 10 22 B/3528-21 T495B226(1)010AT E500 2.2 6.0 500 412 371 165 125 1 10 22 B/3528-21 T495B226(1)010AT E700 2.2 6.0 700 348 313 139 125 1 10 22 B/3528-21 T495B226(1)010AT E800 2.2 6.0 800 326 293 130 125 1 10 22 B/3528-21 T495B226(1)010A(2)E2K3 2.2 6.0 2,300 192 173 77 125 1 10 22 C/6032-28 T495C226(1)010A(2)E200 2.2 6.0 200 742 668 297 125 1 10 22 C/6032-28 T495C226(1)010A(2)E245 2.2 6.0 245 670 603 268 125 1 10 22 C/6032-28 T495C226(1)010A(2)E290 2.2 6.0 290 616 554 246 125 1 10 22 C/6032-28 T495C226(1)010A(2)E300 2.2 6.0 300 606 545 242 125 1 10 22 C/6032-28 T495C226(1)010A(2)E345 2.2 6.0 345 565 509 226 125 1 10 22 C/6032-28 T495C226(1)010A(2)E350 2.2 6.0 350 561 505 224 125 1 10 22 C/6032-28 T495C226(1)010A(2)E380 2.2 6.0 380 538 484 215 125 1 10 33 B/3528-21 T495B336(1)010A(2)E450 3.3 6.0 450 435 392 174 125 1 10 33 B/3528-21 T495B336(1)010A(2)E550 3.3 6.0 550 393 354 157 125 1 10 33 B/3528-21 T495B336(1)010A(2)E650 3.3 6.0 650 362 326 145 125 1 10 33 V/7343-20 T495V336(1)010A(2)E100 3.3 6.0 100 1118 1006 447 125 1 10 33 V/7343-20 T495V336(1)010A(2)E150 3.3 6.0 150 913 822 365 125 1 10 47 B/3528-21 T495B476(1)010A(2)E500 4.7 6.0 500 412 371 165 125 1 10 47 B/3528-21 T495B476(1)010A(2)E650 4.7 6.0 650 362 326 145 125 1 10 47 C/6032-28 T495C476(1)010A(2)E300 4.7 6.0 300 606 545 242 125 1 10 47 U/6032-15 T495U476(1)010A(2)E400 4.7 6.0 400 474 427 190 125 1 10 47 D/7343-31 T495D476(1)010A(2)E080 4.7 4.0 80 1369 1232 548 125 1 10 47 D/7343-31 T495D476(1)010A(2)E090 4.7 6.0 90 1291 1162 516 125 1 10 47 D/7343-31 T495D476(1)010A(2)E100 4.7 6.0 100 1225 1103 490 125 1 10 47 D/7343-31 T495D476(1)010A(2)E200 4.7 4.0 200 866 779 346 125 1 10 47 V/7343-20 T495V476(1)010A(2)E200 4.7 6.0 200 791 712 316 125 1 10 68 B/3528-21 T495B686(1)010A(2)E600 6.8 8.0 600 376 338 150 125 1 10 68 B/3528-21 T495B686(1)010A(2)E750 6.8 8.0 750 337 303 135 125 1 10 68 B/3528-21 T495B686(M)010A(2)E900 6.8 8.0 900 307 276 123 125 1 10 68 C/6032-28 T495C686(1)010A(2)E080 6.8 6.0 80 1173 1056 469 125 1 10 68 C/6032-28 T495C686(1)010A(2)E200 6.8 6.0 200 742 668 297 125 1 10 68 C/6032-28 T495C686(1)010A(2)E225 6.8 6.0 225 699 629 280 125 1 10 68 C/6032-28 T495C686(1)010A(2)E250 6.8 6.0 250 663 597 265 125 1 10 68 V/7343-20 T495V686(1)010A(2)E070 6.8 6.0 70 1336 1202 534 125 1 10 68 V/7343-20 T495V686(1)010A(2)E100 6.8 6.0 100 1118 1006 447 125 1 10 68 V/7343-20 T495V686(1)010A(2)E140 6.8 6.0 140 945 851 378 125 1 10 68 V/7343-20 T495V686(1)010A(2)E200 6.8 6.0 200 791 712 316 125 1 10 68 D/7343-31 T495D686(1)010A(2)E070 6.8 6.0 70 1464 1318 586 125 1 10 68 D/7343-31 T495D686(1)010A(2)E090 6.8 6.0 90 1291 1162 516 125 1 10 68 D/7343-31 T495D686(1)010A(2)E100 6.8 6.0 100 1225 1103 490 125 1 10 68 D/7343-31 T495D686(1)010A(2)E150 6.8 6.0 150 1000 900 400 125 1 10 68 X/7343-43 T495X686(1)010A(2)E150 6.8 4.0 150 1049 944 420 125 1 mΩ at 20°C mA at mA at Reflow (See below for µA +20°C % at +20°C mA at +25°C VDC at 85°C µF KEMET/EIA 100 kHz +85°C 100 +125°C 100 °C Temp part options) Max/5 Min 120 Hz Max 100 kHz Max kHz kHz ≤ 260°C Maximum Rated Rated Case Code/ DC Maximum Allowable KEMET Part Number DF ESR Operating MSL Voltage Cap Case Size Leakage Ripple Current (rms) Temp (1) To complete KEMET part number, insert M for ±20% or K for ±10%. Designates capacitance tolerance. (2) To complete KEMET part number, insert T = 100% Matte Tin (Sn) Plated, G = Gold Plated, H = Standard Solder coated (SnPb 5% Pb minimum), N = Non-Magnetic 100% Tin (Sn) or M = Non-Magnetic (SnPb). Designates termination finish. Refer to Ordering Information for additional detail. Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitution will be marked with the higher voltage rating. Substitutions can include better than series. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2009_T495 • 12/12/2019 9 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

Tantalum Surface Mount Capacitors – Low ESR T495 Surge Robust MnO 2 Table 1 – Ratings & Part Number Reference cont. Case Maximum Rated Rated KEMET Part DC Maximum Allowable Code/ DF ESR Operating MSL Voltage Cap Number Leakage Ripple Current (rms) Case Size Temp mΩ at 20°C mA at mA at mA at Reflow (See below for µA +20°C % at +20°C VDC at 85°C µF KEMET/EIA 100 kHz +25°C 100 +85°C 100 +125°C 100 °C Temp part options) Max/5 Min 120 Hz Max Max kHz kHz kHz ≤ 260°C 10 100 B/3528-21 T495B107(M)010A(2)E350 10.0 12.0 350 493 444 197 125 1 10 100 B/3528-21 T495B107(M)010A(2)E500 10.0 30.0 500 412 371 165 125 1 10 100 B/3528-21 T495B107(M)010A(2)E700 10.0 30.0 700 348 313 139 125 1 10 100 C/6032-28 T495C107(1)010A(2)E100 10.0 8.0 100 1050 945 420 125 1 10 100 C/6032-28 T495C107(1)010A(2)E150 10.0 8.0 150 856 812 542 125 1 10 100 C/6032-28 T495C107(1)010A(2)E180 10.0 8.0 180 782 704 313 125 1 10 100 C/6032-28 T495C107(1)010A(2)E200 10.0 8.0 200 742 668 297 125 1 10 100 C/6032-28 T495C107(1)010A(2)E250 10.0 8.0 250 663 597 265 125 1 10 100 U/6032-15 T495U107(1)010A(2)E150 10.0 8.0 150 775 698 310 125 1 10 100 W/7343-15 T495W107(1)010A(2)E200 10.0 8.0 200 949 854 380 125 1 10 100 V/7343-20 T495V107(1)010A(2)E100 10.0 8.0 100 1118 1006 447 125 1 10 100 V/7343-20 T495V107(1)010A(2)E150 10.0 8.0 150 913 822 365 125 1 10 100 V/7343-20 T495V107(1)010A(2)E200 10.0 8.0 200 791 712 316 125 1 10 100 D/7343-31 T495D107(1)010A(2)E050 10.0 8.0 50 1732 1559 693 125 1 10 100 D/7343-31 T495D107(1)010A(2)E065 10.0 8.0 65 1519 1367 608 125 1 10 100 D/7343-31 T495D107(1)010A(2)E080 10.0 8.0 80 1369 1232 548 125 1 10 100 D/7343-31 T495D107(1)010A(2)E100 10.0 8.0 100 1225 1103 490 125 1 10 100 D/7343-31 T495D107(1)010A(2)E120 10.0 8.0 120 1118 1006 447 125 1 10 100 D/7343-31 T495D107(1)010A(2)E125 10.0 8.0 125 1095 986 438 125 1 10 100 X/7343-43 T495X107(1)010A(2)E100 10.0 6.0 100 1285 1157 514 125 1 10 150 C/6032-28 T495C157(1)010A(2)E200 15.0 10.0 200 742 668 297 125 1 10 150 V/7343-20 T495V157(1)010A(2)E100 15.0 8.0 100 1118 1006 447 125 1 10 150 V/7343-20 T495V157(1)010A(2)E150 15.0 8.0 150 913 822 365 125 1 10 150 V/7343-20 T495V157(1)010A(2)E200 15.0 8.0 200 791 712 316 125 1 10 150 D/7343-31 T495D157(1)010A(2)E050 15.0 8.0 50 1732 1559 693 125 1 10 150 D/7343-31 T495D157(1)010A(2)E060 15.0 8.0 60 1581 1423 632 125 1 10 150 D/7343-31 T495D157(1)010A(2)E080 15.0 8.0 80 1369 1232 548 125 1 10 150 D/7343-31 T495D157(1)010A(2)E100 15.0 8.0 100 1225 1103 490 125 1 10 150 X/7343-43 T495X157(1)010A(2)E070 15.0 8.0 70 1535 1382 614 125 1 10 150 X/7343-43 T495X157(1)010A(2)E080 15.0 8.0 80 1436 1292 574 125 1 10 150 X/7343-43 T495X157(1)010A(2)E085 15.0 8.0 85 1393 1254 557 125 1 10 150 X/7343-43 T495X157(1)010A(2)E100 15.0 8.0 100 1285 1157 514 125 1 10 220 D/7343-31 T495D227(1)010A(2)E045 22.0 8.0 45 1826 1643 730 125 1 10 220 D/7343-31 T495D227(1)010A(2)E050 22.0 9.0 50 1732 1559 693 125 1 10 220 D/7343-31 T495D227(1)010A(2)E075 22.0 8.0 75 1414 1273 566 125 1 10 220 D/7343-31 T495D227(1)010A(2)E100 22.0 8.0 100 1225 1103 490 125 1 10 220 D/7343-31 T495D227(1)010A(2)E125 22.0 8.0 125 1095 986 438 125 1 10 220 V/7343-20 T495V227(1)010A(2)E150 22.0 10.0 150 913 822 365 125 1 10 220 V/7343-20 T495V227(1)010A(2)E200 22.0 10.0 200 791 712 316 125 1 10 220 X/7343-43 T495X227(1)010A(2)E045 22.0 8.0 45 1915 1724 766 125 1 10 220 X/7343-43 T495X227(1)010A(2)E050 22.0 8.0 50 1817 1635 727 125 1 10 220 X/7343-43 T495X227(1)010A(2)E060 22.0 8.0 60 1658 1492 663 125 1 10 220 X/7343-43 T495X227(1)010A(2)E070 22.0 8.0 70 1535 1382 614 125 1 10 220 X/7343-43 T495X227(1)010A(2)E080 22.0 8.0 80 1436 1292 574 125 1 10 220 X/7343-43 T495X227(1)010A(2)E100 22.0 8.0 100 1285 1157 514 125 1 mΩ at 20°C mA at mA at Reflow (See below for µA +20°C % at +20°C mA at +25°C VDC at 85°C µF KEMET/EIA 100 kHz +85°C 100 +125°C 100 °C Temp part options) Max/5 Min 120 Hz Max 100 kHz Max kHz kHz ≤ 260°C Maximum Rated Rated Case Code/ DC Maximum Allowable KEMET Part Number DF ESR Operating MSL Voltage Cap Case Size Leakage Ripple Current (rms) Temp (1) To complete KEMET part number, insert M for ±20% or K for ±10%. Designates capacitance tolerance. (2) To complete KEMET part number, insert T = 100% Matte Tin (Sn) Plated, G = Gold Plated, H = Standard Solder coated (SnPb 5% Pb minimum), N = Non-Magnetic 100% Tin (Sn) or M = Non-Magnetic (SnPb). Designates termination finish. Refer to Ordering Information for additional detail. Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitution will be marked with the higher voltage rating. Substitutions can include better than series. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2009_T495 • 12/12/2019 10 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

Tantalum Surface Mount Capacitors – Low ESR T495 Surge Robust MnO 2 Table 1 – Ratings & Part Number Reference cont. Case Maximum Rated Rated KEMET Part DC Maximum Allowable Code/ DF ESR Operating MSL Voltage Cap Number Leakage Ripple Current (rms) Case Size Temp mΩ at 20°C mA at mA at mA at Reflow (See below for µA +20°C % at +20°C VDC at 85°C µF KEMET/EIA 100 kHz +25°C 100 +85°C 100 +125°C 100 °C Temp part options) Max/5 Min 120 Hz Max Max kHz kHz kHz ≤ 260°C 10 330 D/7343-31 T495D337(1)010A(2)E100 33.0 8.0 100 1225 1103 490 125 1 10 330 D/7343-31 T495D337(1)010A(2)E125 33.0 10.0 125 1095 986 438 125 1 10 330 D/7343-31 T495D337(1)010A(2)E150 33.0 10.0 150 1000 900 400 125 1 10 330 X/7343-43 T495X337(1)010A(2)E035 33.0 10.0 35 2171 1954 868 125 1 10 330 X/7343-43 T495X337(1)010A(2)E040 33.0 10.0 40 2031 1828 812 125 1 10 330 X/7343-43 T495X337(1)010A(2)E050 33.0 10.0 50 1817 1635 727 125 1 10 330 X/7343-43 T495X337(1)010A(2)E060 33.0 10.0 60 1658 1492 663 125 1 10 330 X/7343-43 T495X337(1)010A(2)E080 33.0 10.0 80 1436 1292 574 125 1 10 330 X/7343-43 T495X337(1)010A(2)E100 33.0 10.0 100 1285 1157 514 125 1 10 330 E/7360-38 T495E337(1)010A(2)E040 33.0 8.0 40 2236 2012 894 125 1 10 330 E/7360-38 T495E337(1)010A(2)E060 33.0 10.0 60 1826 1643 730 125 1 10 330 E/7360-38 T495E337(1)010A(2)E100 33.0 10.0 100 1414 1273 566 125 1 10 470 X/7343-43 T495X477(1)010A(2)E045 47.0 10.0 45 1915 1724 766 125 1 10 470 X/7343-43 T495X477(1)010A(2)E050 47.0 10.0 50 1817 1635 727 125 1 10 470 X/7343-43 T495X477(1)010A(2)E060 47.0 10.0 60 1658 1492 663 125 1 10 470 X/7343-43 T495X477(1)010A(2)E080 47.0 10.0 80 1436 1292 574 125 1 10 470 X/7343-43 T495X477(1)010A(2)E100 47.0 10.0 100 1285 1157 514 125 1 10 470 X/7343-43 T495X477(1)010A(2)E200 47.0 10.0 200 908 817 363 125 1 10 470 E/7360-38 T495E477(1)010A(2)E040 47.0 10.0 40 2236 2012 894 125 1 10 470 E/7360-38 T495E477(1)010A(2)E060 47.0 10.0 60 1826 1643 730 125 1 10 470 E/7360-38 T495E477(1)010A(2)E100 47.0 10.0 100 1414 1273 566 125 1 16 1 A/3216-18 T495A105(1)016A(2)E5K0 0.5 6.0 5,000 122 110 49 125 1 16 2 A/3216-18 T495A155(1)016A(2)E5K0 0.5 6.0 5,000 122 110 49 125 1 16 2.2 A/3216-18 T495A225(1)016A(2)E2K5 0.5 6.0 2,500 173 156 69 125 1 16 2.2 A/3216-18 T495A225(1)016A(2)E1K8 0.5 6.0 1,800 204 184 82 125 1 16 3.3 A/3216-18 T495A335(1)016A(2)E3K0 0.5 6.0 3,000 158 142 63 125 1 16 3.3 B/3528-21 T495B335(1)016A(2)E2K0 0.5 6.0 2,000 206 185 82 125 1 16 4.7 A/3216-18 T495A475(1)016A(2)E2K0 0.8 6.0 2,000 194 175 78 125 1 16 4.7 B/3528-21 T495B475(1)016A(2)E700 0.8 6.0 700 348 313 139 125 1 16 4.7 B/3528-21 T495B475(1)016A(2)E800 0.8 6.0 800 326 293 130 125 1 16 5 B/3528-21 T495B475(1)016A(2)E1K0 0.8 6.0 1,000 292 263 117 125 1 16 5 B/3528-21 T495B475(1)016A(2)E1K5 0.8 6.0 1,500 238 214 95 125 1 16 7 B/3528-21 T495B685(1)016A(2)E1K2 1.1 6.0 1,200 266 239 106 125 1 16 6.8 C/6032-28 T495C685(1)016A(2)E750 1.1 6.0 750 383 345 153 125 1 16 10 A/3216-18 T495A106(1)016A(2)E1K7 1.6 6.0 1,700 210 189 84 125 1 16 10 B/3528-21 T495B106(1)016A(2)E500 1.6 6.0 500 412 371 165 125 1 16 10 B/3528-21 T495B106(1)016A(2)E650 1.6 6.0 650 362 326 145 125 1 16 10 B/3528-21 T495B106(1)016A(2)E800 1.6 6.0 800 326 293 130 125 1 16 10 B/3528-21 T495B106(1)016A(2)E2K5 1.6 6.0 2,500 184 166 74 125 1 16 10 T/3528-12 T495T106(M)016A(2)E4K0 1.6 8.0 4,000 132 119 53 125 1 16 15 A/3216-18 T495A156(1)016A(2)E2K5 2.4 8.0 2,500 173 156 69 125 1 16 15 B/3528-21 T495B156(1)016A(2)E500 2.4 6.0 500 412 371 165 125 1 16 15 B/3528-21 T495B156(1)016A(2)E650 2.4 6.0 650 362 326 145 125 1 16 15 B/3528-21 T495B156(1)016A(2)E800 2.4 6.0 800 326 293 130 125 1 16 15 C/6032-28 T495C156(1)016A(2)E400 2.4 6.0 400 524 472 210 125 1 mΩ at 20°C mA at mA at Reflow (See below for µA +20°C % at +20°C mA at +25°C VDC at 85°C µF KEMET/EIA 100 kHz +85°C 100 +125°C 100 °C Temp part options) Max/5 Min 120 Hz Max 100 kHz Max kHz kHz ≤ 260°C Maximum Rated Rated Case Code/ DC Maximum Allowable KEMET Part Number DF ESR Operating MSL Voltage Cap Case Size Leakage Ripple Current (rms) Temp (1) To complete KEMET part number, insert M for ±20% or K for ±10%. Designates capacitance tolerance. (2) To complete KEMET part number, insert T = 100% Matte Tin (Sn) Plated, G = Gold Plated, H = Standard Solder coated (SnPb 5% Pb minimum), N = Non-Magnetic 100% Tin (Sn) or M = Non-Magnetic (SnPb). Designates termination finish. Refer to Ordering Information for additional detail. Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitution will be marked with the higher voltage rating. Substitutions can include better than series. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2009_T495 • 12/12/2019 11 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

Tantalum Surface Mount Capacitors – Low ESR T495 Surge Robust MnO 2 Table 1 – Ratings & Part Number Reference cont. Case Maximum Rated Rated KEMET Part DC Maximum Allowable Code/ DF ESR Operating MSL Voltage Cap Number Leakage Ripple Current (rms) Case Size Temp mΩ at 20°C mA at mA at mA at Reflow (See below for µA +20°C % at +20°C VDC at 85°C µF KEMET/EIA 100 kHz +25°C 100 +85°C 100 +125°C 100 °C Temp part options) Max/5 Min 120 Hz Max Max kHz kHz kHz ≤ 260°C 16 22 B/3528-21 T495B226(1)016A(2)E600 3.5 6.0 600 376 338 150 125 1 16 22 B/3528-21 T495B226(1)016A(2)E700 3.5 6.0 700 348 313 139 125 1 16 22 C/6032-28 T495C226(1)016A(2)E300 3.5 6.0 300 606 545 242 125 1 16 22 C/6032-28 T495C226(1)016A(2)E350 3.5 6.0 350 561 505 224 125 1 16 22 C/6032-28 T495C226(1)016A(2)E500 3.5 6.0 500 469 422 188 125 1 16 33 C/6032-28 T495C336(1)016A(2)E200 5.3 6.0 200 742 668 297 125 1 16 33 C/6032-28 T495C336(1)016A(2)E225 5.3 6.0 225 699 629 280 125 1 16 33 C/6032-28 T495C336(1)016A(2)E230 5.3 6.0 230 692 623 277 125 1 16 33 C/6032-28 T495C336(1)016A(2)E275 5.3 6.0 275 632 569 253 125 1 16 33 C/6032-28 T495C336(1)016A(2)E300 5.3 6.0 300 606 545 242 125 1 16 33 U/6032-15 T495U336(1)016A(2)E200 5.3 6.0 200 671 604 268 125 1 16 33 U/6032-15 T495U336(1)016A(2)E400 5.3 6.0 400 474 427 190 125 1 16 33 B/3528-21 T495B336(1)016A(2)E350 5.3 6.0 350 493 444 197 125 1 16 33 D/7343-31 T495D336(1)016A(2)E150 5.3 6.0 150 1000 900 400 125 1 16 33 D/7343-31 T495D336(1)016A(2)E175 5.3 6.0 175 926 833 370 125 1 16 33 D/7343-31 T495D336(1)016A(2)E200 5.3 6.0 200 866 779 346 125 1 16 33 D/7343-31 T495D336(1)016A(2)E225 5.3 4.0 225 816 734 326 125 1 16 33 D/7343-31 T495D336(1)016A(2)E250 5.3 6.0 250 775 698 310 125 1 16 47 C/6032-28 T495C476(1)016A(2)E300 7.5 6.0 300 606 545 242 125 1 16 47 C/6032-28 T495C476(1)016A(2)E350 7.5 6.0 350 561 505 224 125 1 16 47 D/7343-31 T495D476(1)016A(2)E080 7.5 6.0 80 1369 1232 548 125 1 16 47 D/7343-31 T495D476(1)016A(2)E100 7.5 6.0 100 1225 1103 490 125 1 16 47 D/7343-31 T495D476(1)016A(2)E150 7.5 6.0 150 1000 900 400 125 1 16 47 D/7343-31 T495D476(1)016A(2)E180 7.5 6.0 180 913 822 365 125 1 16 47 D/7343-31 T495D476(1)016A(2)E800 7.5 6.0 800 433 390 173 125 1 16 68 C/6032-28 T495C686(1)016A(2)E250 10.9 6.0 250 663 597 265 125 1 16 68 C/6032-28 T495C686(1)016A(2)E200 10.9 6.0 200 742 668 297 125 1 16 68 C/6032-28 T495C686(1)016A(2)E180 10.9 6.0 180 782 704 313 125 1 16 68 V/7343-20 T495V686(1)016A(2)E180 10.9 6.0 180 833 750 333 125 1 16 68 V/7343-20 T495V686(1)016A(2)E250 10.9 6.0 250 707 636 283 125 1 16 68 V/7343-20 T495V686(1)016A(2)E300 10.9 6.0 300 645 581 258 125 1 16 68 D/7343-31 T495D686(1)016A(2)E070 10.9 6.0 70 1464 1318 586 125 1 16 68 D/7343-31 T495D686(1)016A(2)E100 10.9 6.0 100 1225 1103 490 125 1 16 68 D/7343-31 T495D686(1)016A(2)E150 10.9 6.0 150 1000 900 400 125 1 16 68 X/7343-43 T495X686(1)016A(2)E150 10.9 5.0 150 1049 944 420 125 1 16 100 C/6032-28 T495C107(1)016A(2)E200 16.0 10.0 200 742 668 297 125 1 16 100 D/7343-31 T495D107(1)016A(2)E060 16.0 8.0 60 1581 1423 632 125 1 16 100 D/7343-31 T495D107(1)016A(2)E100 16.0 8.0 100 1225 1103 490 125 1 16 100 D/7343-31 T495D107(1)016A(2)E125 16.0 8.0 125 1095 986 438 125 1 16 100 D/7343-31 T495D107(1)016A(2)E130 16.0 8.0 130 1074 967 430 125 1 16 100 D/7343-31 T495D107(1)016A(2)E150 16.0 8.0 150 1000 900 400 125 1 16 100 D/7343-31 T495D107(1)016A(2)E800 16.0 8.0 800 433 390 173 125 1 16 100 X/7343-43 T495X107(1)016A(2)E080 16.0 8.0 80 1436 1292 574 125 1 16 100 X/7343-43 T495X107(1)016A(2)E100 16.0 8.0 100 1285 1157 514 125 1 16 150 D/7343-31 T495D157(M)016A(2)E060 24.0 12.0 60 1581 1423 632 125 1 mΩ at 20°C mA at mA at Reflow (See below for µA +20°C % at +20°C mA at +25°C VDC at 85°C µF KEMET/EIA 100 kHz +85°C 100 +125°C 100 °C Temp part options) Max/5 Min 120 Hz Max 100 kHz Max kHz kHz ≤ 260°C Maximum Rated Rated Case Code/ DC Maximum Allowable KEMET Part Number DF ESR Operating MSL Voltage Cap Case Size Leakage Ripple Current (rms) Temp (1) To complete KEMET part number, insert M for ±20% or K for ±10%. Designates capacitance tolerance. (2) To complete KEMET part number, insert T = 100% Matte Tin (Sn) Plated, G = Gold Plated, H = Standard Solder coated (SnPb 5% Pb minimum), N = Non-Magnetic 100% Tin (Sn) or M = Non-Magnetic (SnPb). Designates termination finish. Refer to Ordering Information for additional detail. Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitution will be marked with the higher voltage rating. Substitutions can include better than series. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2009_T495 • 12/12/2019 12 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

Tantalum Surface Mount Capacitors – Low ESR T495 Surge Robust MnO 2 Table 1 – Ratings & Part Number Reference cont. Case Maximum Rated Rated KEMET Part DC Maximum Allowable Code/ DF ESR Operating MSL Voltage Cap Number Leakage Ripple Current (rms) Case Size Temp mΩ at 20°C mA at mA at mA at Reflow (See below for µA +20°C % at +20°C VDC at 85°C µF KEMET/EIA 100 kHz +25°C 100 +85°C 100 +125°C 100 °C Temp part options) Max/5 Min 120 Hz Max Max kHz kHz kHz ≤ 260°C 16 150 D/7343-31 T495D157(1)016A(2)E085 24.0 8.0 85 1328 1195 531 125 1 16 150 D/7343-31 T495D157(1)016A(2)E100 24.0 8.0 100 1225 1103 490 125 1 16 150 D/7343-31 T495D157(1)016A(2)E125 24.0 8.0 125 1095 986 438 125 1 16 150 D/7343-31 T495D157(1)016A(2)E130 24.0 8.0 130 1074 967 430 125 1 16 150 D/7343-31 T495D157(1)016A(2)E150 24.0 8.0 150 1000 900 400 125 1 16 150 X/7343-43 T495X157(1)016A(2)E075 24.0 8.0 75 1483 1335 593 125 1 16 150 X/7343-43 T495X157(1)016A(2)E100 24.0 8.0 100 1285 1157 514 125 1 16 220 D/7343-31 T495D227(1)016A(2)E150 35.2 12.0 150 1000 900 400 125 1 16 220 D/7343-31 T495D227(1)016A(2)E200 35.2 12.0 200 866 779 346 125 1 16 220 D/7343-31 T495D227(1)016A(2)E220 35.2 12.0 220 826 743 330 125 1 16 220 X/7343-43 T495X227(1)016A(2)E100 35.2 8.0 100 1285 1157 514 125 1 16 220 E/7360-38 T495E227(1)016A(2)E050 35.2 12.0 50 2000 1800 800 125 1 16 220 E/7360-38 T495E227(1)016A(2)E075 35.2 8.0 75 1633 1470 653 125 1 16 220 E/7360-38 T495E227(1)016A(2)E100 35.2 7.2 100 1414 1273 566 125 1 16 220 E/7360-38 T495E227(1)016A(2)E150 35.2 7.2 150 1155 1040 462 125 1 20 1 A/3216-18 T495A105(1)020A(2)E3K0 0.5 4.0 3,000 158 142 63 125 1 20 1 A/3216-18 T495A105(1)020A(2)E5K0 0.5 4.0 5,000 122 110 49 125 1 20 2 A/3216-18 T495A225(1)020A(2)E3K0 0.5 6.0 3,000 158 142 63 125 1 20 4.7 A/3216-18 T495A475(1)020A(2)E1K8 0.9 6.0 1,800 204 184 82 125 1 20 4.7 A/3216-18 T495A475(1)020A(2)E2K0 0.9 6.0 2,000 194 175 78 125 1 20 4.7 B/3528-21 T495B475(1)020A(2)E750 0.9 6.0 750 337 303 135 125 1 20 4.7 B/3528-21 T495B475(1)020A(2)E1K0 0.9 6.0 1,000 292 263 117 125 1 20 7 C/6032-28 T495C685(1)020A(2)E480 1.4 6.0 480 479 431 192 125 1 20 10 B/3528-21 T495B106(1)020A(2)E1K0 2.0 6.0 1,000 292 263 117 125 1 20 10 B/3528-21 T495B106(1)020A(2)E800 2.0 6.0 800 326 293 130 125 1 20 10 C/6032-28 T495C106(1)020A(2)E300 2.0 6.0 300 606 545 242 125 1 20 10 C/6032-28 T495C106(1)020A(2)E350 2.0 6.0 350 561 505 224 125 1 20 10 C/6032-28 T495C106(1)020A(2)E400 2.0 6.0 400 524 472 210 125 1 20 10 C/6032-28 T495C106(1)020A(2)E450 2.0 6.0 450 494 445 198 125 1 20 10 C/6032-28 T495C106(1)020A(2)E475 2.0 6.0 475 481 433 192 125 1 20 15 C/6032-28 T495C156(1)020A(2)E375 3.0 6.0 375 542 488 217 125 1 20 15 C/6032-28 T495C156(1)020A(2)E400 3.0 6.0 400 524 472 210 125 1 20 15 D/7343-31 T495D156(1)020A(2)E275 3.0 4.0 275 739 665 296 125 1 20 15 D/7343-31 T495D156(1)020A(2)E1K2 3.0 4.0 1,200 354 319 142 125 1 20 22 D/7343-31 T495D226(1)020A(2)E180 4.4 4.0 180 913 822 365 125 1 20 22 D/7343-31 T495D226(1)020A(2)E200 4.4 4.0 200 866 779 346 125 1 20 22 D/7343-31 T495D226(1)020A(2)E225 4.4 4.0 225 816 734 326 125 1 20 22 V/7343-20 T495V226(1)020A(2)E400 4.4 6.0 400 559 503 224 125 1 20 33 C/6032-28 T495C336(1)020A(2)E200 6.6 6.0 200 742 668 297 125 1 20 33 D/7343-31 T495D336(1)020A(2)E100 6.6 6.0 100 1225 1103 490 125 1 20 33 D/7343-31 T495D336(1)020A(2)E150 6.6 6.0 150 1000 900 400 125 1 20 33 D/7343-31 T495D336(1)020A(2)E200 6.6 6.0 200 866 779 346 125 1 20 33 X/7343-43 T495X336(1)020A(2)E200 6.6 6.0 200 908 817 363 125 1 20 47 D/7343-31 T495D476(1)020A(2)E075 9.4 6.0 75 1414 1273 566 125 1 20 47 D/7343-31 T495D476(1)020A(2)E100 9.4 6.0 100 1225 1103 490 125 1 mΩ at 20°C mA at mA at Reflow (See below for µA +20°C % at +20°C mA at +25°C VDC at 85°C µF KEMET/EIA 100 kHz +85°C 100 +125°C 100 °C Temp part options) Max/5 Min 120 Hz Max 100 kHz Max kHz kHz ≤ 260°C Maximum Rated Rated Case Code/ DC Maximum Allowable KEMET Part Number DF ESR Operating MSL Voltage Cap Case Size Leakage Ripple Current (rms) Temp (1) To complete KEMET part number, insert M for ±20% or K for ±10%. Designates capacitance tolerance. (2) To complete KEMET part number, insert T = 100% Matte Tin (Sn) Plated, G = Gold Plated, H = Standard Solder coated (SnPb 5% Pb minimum), N = Non-Magnetic 100% Tin (Sn) or M = Non-Magnetic (SnPb). Designates termination finish. Refer to Ordering Information for additional detail. Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitution will be marked with the higher voltage rating. Substitutions can include better than series. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2009_T495 • 12/12/2019 13 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

Tantalum Surface Mount Capacitors – Low ESR T495 Surge Robust MnO 2 Table 1 – Ratings & Part Number Reference cont. Case Maximum Rated Rated KEMET Part DC Maximum Allowable Code/ DF ESR Operating MSL Voltage Cap Number Leakage Ripple Current (rms) Case Size Temp mΩ at 20°C mA at mA at mA at Reflow (See below for µA +20°C % at +20°C VDC at 85°C µF KEMET/EIA 100 kHz +25°C 100 +85°C 100 +125°C 100 °C Temp part options) Max/5 Min 120 Hz Max Max kHz kHz kHz ≤ 260°C 20 47 D/7343-31 T495D476(1)020A(2)E150 9.4 6.0 150 1000 900 400 125 1 20 47 D/7343-31 T495D476(1)020A(2)E175 9.4 6.0 175 926 833 370 125 1 20 47 D/7343-31 T495D476(1)020A(2)E200 9.4 6.0 200 866 779 346 125 1 20 47 D/7343-31 T495D476(1)020A(2)E250 9.4 6.0 250 775 698 310 125 1 20 47 X/7343-43 T495X476(1)020A(2)E065 9.4 8.0 65 1593 1434 637 125 1 20 47 X/7343-43 T495X476(1)020A(2)E070 9.4 6.0 70 1535 1382 614 125 1 20 47 X/7343-43 T495X476(1)020A(2)E100 9.4 6.0 100 1285 1157 514 125 1 20 47 X/7343-43 T495X476(1)020A(2)E125 9.4 6.0 125 1149 1034 460 125 1 20 47 X/7343-43 T495X476(1)020A(2)E130 9.4 6.0 130 1127 1014 451 125 1 20 47 X/7343-43 T495X476(1)020A(2)E150 9.4 4.0 150 1049 944 420 125 1 20 68 C/6032-28 T495C686(1)020A(2)E250 13.6 8.0 250 663 597 265 125 1 20 68 D/7343-31 T495D686(1)020A(2)E070 13.6 6.0 70 1464 1318 586 125 1 20 68 D/7343-31 T495D686(1)020A(2)E100 13.6 6.0 100 1225 1103 490 125 1 20 68 D/7343-31 T495D686(1)020A(2)E150 13.6 6.0 150 1000 900 400 125 1 20 68 D/7343-31 T495D686(1)020A(2)E200 13.6 6.0 200 866 779 346 125 1 20 68 D/7343-31 T495D686(1)020A(2)E300 13.6 6.0 300 707 636 283 125 1 20 68 X/7343-43 T495X686(1)020A(2)E120 13.6 6.0 120 1173 1056 469 125 1 20 68 X/7343-43 T495X686(1)020A(2)E130 13.6 6.0 130 1127 1014 451 125 1 20 68 X/7343-43 T495X686(1)020A(2)E150 13.6 6.0 150 1049 944 420 125 1 20 68 X/7343-43 T495X686(1)020A(2)E200 13.6 6.0 200 908 817 363 125 1 20 100 D/7343-31 T495D107(1)020A(2)E200 20.0 6.0 200 866 779 346 125 1 20 100 X/7343-43 T495X107(1)020A(2)E100 20.0 6.0 100 1285 1157 514 125 1 20 100 X/7343-43 T495X107(1)020A(2)E150 20.0 8.0 150 1049 944 420 125 1 20 100 E/7360-38 T495E107(1)020A(2)E060 20.0 8.0 60 1826 1643 730 125 1 20 100 E/7360-38 T495E107(1)020A(2)E085 20.0 8.0 85 1534 1381 614 125 1 20 100 E/7360-38 T495E107(1)020A(2)E100 20.0 8.0 100 1414 1273 566 125 1 20 100 E/7360-38 T495E107(1)020A(2)E200 20.0 8.0 200 1000 900 400 125 1 20 150 E/7360-38 T495E157(1)020A(2)E080 30.0 8.0 80 1581 1423 632 125 1 25 0.47 A/3216-18 T495A474(1)025A(2)E4K5 0.5 4.0 4,500 129 116 52 125 1 25 0.47 A/3216-18 T495A474(1)025A(2)E7K0 0.5 4.0 7,000 104 94 42 125 1 25 1 A/3216-18 T495A105(1)025A(2)E2K5 0.5 4.0 2,500 173 156 69 125 1 25 1 A/3216-18 T495A105(1)025A(2)E3K0 0.5 4.0 3,000 158 142 63 125 1 25 1 A/3216-18 T495A105(1)025A(2)E4K0 0.5 4.0 4,000 137 123 55 125 1 25 1 A/3216-18 T495A105(1)025A(2)E5K0 0.5 4.0 5,000 122 110 49 125 1 25 2 A/3216-18 T495A155(1)025A(2)E3K0 0.5 6.0 3,000 158 142 63 125 1 25 2 B/3528-21 T495B225(1)025A(2)E1K2 0.6 4.0 1,200 266 239 106 125 1 25 2.2 C/6032-28 T495C225(1)025A(2)E1K3 0.6 6.0 1,300 291 262 116 125 1 25 3.3 B/3528-21 T495B335(1)025A(2)E1K2 0.8 6.0 1,200 266 239 106 125 1 25 3.3 C/6032-28 T495C335(1)025A(2)E750 0.8 6.0 750 383 345 153 125 1 25 4.7 C/6032-28 T495C475(1)025A(2)E530 1.2 6.0 530 456 410 182 125 1 25 4.7 C/6032-28 T495C475(1)025A(2)E575 1.2 6.0 575 437 393 175 125 1 25 4.7 B/3528-21 T495B475(1)025A(2)E700 1.2 6.0 700 348 313 139 125 1 25 4.7 B/3528-21 T495B475(1)025A(2)E750 1.2 6.0 750 337 303 135 125 1 25 4.7 B/3528-21 T495B475(1)025A(2)E800 1.2 6.0 800 326 293 130 125 1 25 4.7 B/3528-21 T495B475(1)025A(2)E900 1.2 6.0 900 307 276 123 125 1 mΩ at 20°C mA at mA at Reflow (See below for µA +20°C % at +20°C mA at +25°C VDC at 85°C µF KEMET/EIA 100 kHz +85°C 100 +125°C 100 °C Temp part options) Max/5 Min 120 Hz Max 100 kHz Max kHz kHz ≤ 260°C Maximum Rated Rated Case Code/ DC Maximum Allowable KEMET Part Number DF ESR Operating MSL Voltage Cap Case Size Leakage Ripple Current (rms) Temp (1) To complete KEMET part number, insert M for ±20% or K for ±10%. Designates capacitance tolerance. (2) To complete KEMET part number, insert T = 100% Matte Tin (Sn) Plated, G = Gold Plated, H = Standard Solder coated (SnPb 5% Pb minimum), N = Non-Magnetic 100% Tin (Sn) or M = Non-Magnetic (SnPb). Designates termination finish. Refer to Ordering Information for additional detail. Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitution will be marked with the higher voltage rating. Substitutions can include better than series. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2009_T495 • 12/12/2019 14 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

Tantalum Surface Mount Capacitors – Low ESR T495 Surge Robust MnO 2 Table 1 – Ratings & Part Number Reference cont. Case Maximum Rated Rated KEMET Part DC Maximum Allowable Code/ DF ESR Operating MSL Voltage Cap Number Leakage Ripple Current (rms) Case Size Temp mΩ at 20°C mA at mA at mA at Reflow (See below for µA +20°C % at +20°C VDC at 85°C µF KEMET/EIA 100 kHz +25°C 100 +85°C 100 +125°C 100 °C Temp part options) Max/5 Min 120 Hz Max Max kHz kHz kHz ≤ 260°C 25 4.7 B/3528-21 T495B475(1)025A(2)E1K0 1.2 6.0 1,000 292 263 117 125 1 25 7 B/3528-21 T495B685(1)025A(2)E1K0 1.7 6.0 1,000 292 263 117 125 1 25 6.8 B/3528-21 T495B685(1)025A(2)E1K5 1.7 6.0 1,500 238 214 95 125 1 25 6.8 C/6032-28 T495C685(1)025A(2)E400 1.7 6.0 400 524 472 210 125 1 25 6.8 C/6032-28 T495C685(1)025A(2)E490 1.7 6.0 490 474 427 190 125 1 25 6.8 C/6032-28 T495C685(1)025A(2)E500 1.7 6.0 500 469 422 188 125 1 25 10 B/3528-21 T495B106(1)025A(2)E750 2.5 6.0 750 337 303 135 125 1 25 10 C/6032-28 T495C106(1)025A(2)E275 2.5 6.0 275 632 569 253 125 1 25 10 C/6032-28 T495C106(1)025A(2)E300 2.5 6.0 300 606 545 242 125 1 25 10 C/6032-28 T495C106(1)025A(2)E450 2.5 6.0 450 494 445 198 125 1 25 10 D/7343-31 T495D106(1)025A(2)E1K2 2.5 6.0 1,200 354 319 142 125 1 25 15 C/6032-28 T495C156(1)025A(2)E300 3.8 6.0 300 606 545 242 125 1 25 15 D/7343-31 T495D156(1)025A(2)E100 3.8 6.0 100 1225 1103 490 125 1 25 15 D/7343-31 T495D156(1)025A(2)E230 3.8 4.0 230 808 727 323 125 1 25 15 D/7343-31 T495D156(1)025A(2)E275 3.8 6.0 275 739 665 296 125 1 25 15 V/7343-20 T495V156(1)025A(2)E500 3.8 6.0 500 500 450 200 125 1 25 15 X/7343-43 T495X156(1)025A(2)E200 3.8 4.0 200 908 817 363 125 1 25 22 C/6032-28 T495C226(1)025A(2)E275 5.5 6.0 275 632 569 253 125 1 25 22 C/6032-28 T495C226(1)025A(2)E280 5.5 6.0 280 627 564 251 125 1 25 22 C/6032-28 T495C226(1)025A(2)E300 5.5 8.0 300 606 545 242 125 1 25 22 C/6032-28 T495C226(1)025A(2)E900 5.5 6.0 900 350 315 140 125 1 25 22 D/7343-31 T495D226(1)025A(2)E200 5.5 6.0 200 866 779 346 125 1 25 22 D/7343-31 T495D226(1)025A(2)E230 5.5 6.0 230 808 727 323 125 1 25 22 X/7343-43 T495X226(1)025A(2)E225 5.5 4.0 225 856 770 342 125 1 25 33 D/7343-31 T495D336(1)025A(2)E090 8.3 6.0 90 1291 1162 516 125 1 25 33 D/7343-31 T495D336(1)025A(2)E100 8.3 6.0 100 1225 1103 490 125 1 25 33 D/7343-31 T495D336(1)025A(2)E150 8.3 6.0 150 1000 900 400 125 1 25 33 D/7343-31 T495D336(1)025A(2)E200 8.3 6.0 200 866 779 346 125 1 25 33 D/7343-31 T495D336(1)025A(2)E225 8.3 6.0 225 816 734 326 125 1 25 33 D/7343-31 T495D336(1)025A(2)E230 8.3 6.0 230 808 727 323 125 1 25 33 D/7343-31 T495D336(1)025A(2)E300 8.3 6.0 300 707 636 283 125 1 25 33 X/7343-43 T495X336(1)025A(2)E100 8.3 4.0 100 1285 1157 514 125 1 25 33 X/7343-43 T495X336(1)025A(2)E175 8.3 4.0 175 971 874 388 125 1 25 33 X/7343-43 T495X336(1)025A(2)E180 8.3 4.0 180 957 861 383 125 1 25 33 X/7343-43 T495X336(1)025A(2)E200 8.3 4.0 200 908 817 363 125 1 25 47 X/7343-43 T495X476(1)025A(2)E080 11.8 6.0 80 1436 1292 574 125 1 25 47 X/7343-43 T495X476(1)025A(2)E100 11.8 6.0 100 1285 1157 514 125 1 25 47 X/7343-43 T495X476(1)025A(2)E120 11.8 6.0 120 1173 1056 469 125 1 25 47 X/7343-43 T495X476(1)025A(2)E150 11.8 6.0 150 1049 944 420 125 1 25 47 X/7343-43 T495X476(1)025A(2)E185 11.8 6.0 185 944 850 378 125 1 25 47 X/7343-43 T495X476(1)025A(2)E200 11.8 6.0 200 908 817 363 125 1 25 47 D/7343-31 T495D476(1)025A(2)E100 11.8 6.0 100 1225 1103 490 125 1 25 47 D/7343-31 T495D476(1)025A(2)E120 11.8 6.0 120 1118 1006 447 125 1 25 47 D/7343-31 T495D476(1)025A(2)E130 11.8 6.0 130 1074 967 430 125 1 25 47 D/7343-31 T495D476(1)025A(2)E150 11.8 6.0 150 1000 900 400 125 1 mΩ at 20°C mA at mA at Reflow (See below for µA +20°C % at +20°C mA at +25°C VDC at 85°C µF KEMET/EIA 100 kHz +85°C 100 +125°C 100 °C Temp part options) Max/5 Min 120 Hz Max 100 kHz Max kHz kHz ≤ 260°C Maximum Rated Rated Case Code/ DC Maximum Allowable KEMET Part Number DF ESR Operating MSL Voltage Cap Case Size Leakage Ripple Current (rms) Temp (1) To complete KEMET part number, insert M for ±20% or K for ±10%. Designates capacitance tolerance. (2) To complete KEMET part number, insert T = 100% Matte Tin (Sn) Plated, G = Gold Plated, H = Standard Solder coated (SnPb 5% Pb minimum), N = Non-Magnetic 100% Tin (Sn) or M = Non-Magnetic (SnPb). Designates termination finish. Refer to Ordering Information for additional detail. Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitution will be marked with the higher voltage rating. Substitutions can include better than series. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2009_T495 • 12/12/2019 15 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

Tantalum Surface Mount Capacitors – Low ESR T495 Surge Robust MnO 2 Table 1 – Ratings & Part Number Reference cont. Case Maximum Rated Rated KEMET Part DC Maximum Allowable Code/ DF ESR Operating MSL Voltage Cap Number Leakage Ripple Current (rms) Case Size Temp mΩ at 20°C mA at mA at mA at Reflow (See below for µA +20°C % at +20°C VDC at 85°C µF KEMET/EIA 100 kHz +25°C 100 +85°C 100 +125°C 100 °C Temp part options) Max/5 Min 120 Hz Max Max kHz kHz kHz ≤ 260°C 25 47 D/7343-31 T495D476(1)025A(2)E250 11.8 6.0 250 775 698 310 125 1 25 68 D/7343-31 T495D686(1)025A(2)E150 17.0 10.0 150 1000 900 400 125 1 25 68 D/7343-31 T495D686(1)025A(2)E200 17.0 10.0 200 866 779 346 125 1 25 68 X/7343-43 T495X686(1)025A(2)E125 17.0 6.0 125 1149 1034 460 125 1 25 68 X/7343-43 T495X686(1)025A(2)E130 17.0 6.0 130 1127 1014 451 125 1 25 68 X/7343-43 T495X686(1)025A(2)E150 17.0 6.0 150 1049 944 420 125 1 25 68 X/7343-43 T495X686(1)025A(2)E200 17.0 6.0 200 908 817 363 125 1 25 100 X/7343-43 T495X107(1)025A(2)E150 25.0 10.0 150 1049 944 420 125 1 25 100 E/7360-38 T495E107(1)025A(2)E100 25.0 8.0 100 1414 1273 566 125 1 35 0.33 A/3216-18 T495A334(1)035A(2)E6K0 0.5 4.0 6,000 112 101 45 125 1 35 0 A/3216-18 T495A474(1)035A(2)E4K0 0.5 4.0 4,000 137 123 55 125 1 35 0.47 B/3528-21 T495B474(1)035A(2)E1K5 0.5 4.0 1,500 238 214 95 125 1 35 0.47 B/3528-21 T495B474(1)035A(2)E2K2 0.5 4.0 2,200 197 177 79 125 1 35 0.47 B/3528-21 T495B474(1)035A(2)E2K5 0.5 4.0 2,500 184 166 74 125 1 35 0.47 B/3528-21 T495B474(1)035A(2)E11K 0.5 4.0 11,000 88 79 35 125 1 35 1 A/3216-18 T495A105(1)035A(2)E3K0 0.5 4.0 3,000 158 142 63 125 1 35 1 B/3528-21 T495B105(1)035A(2)E1K5 0.5 4.0 1,500 238 214 95 125 1 35 1 B/3528-21 T495B105(1)035A(2)E1K7 0.5 4.0 1,700 224 202 90 125 1 35 1 B/3528-21 T495B105(1)035A(2)E2K0 0.5 4.0 2,000 206 185 82 125 1 35 1 B/3528-21 T495B105(1)035A(2)E7K0 0.5 4.0 7,000 110 99 44 125 1 35 2.2 B/3528-21 T495B225(1)035A(2)E1K5 0.8 6.0 1,500 238 214 95 125 1 35 2.2 B/3528-21 T495B225(1)035A(2)E2K0 0.8 6.0 2,000 206 185 82 125 1 35 2.2 B/3528-21 T495B225(1)035A(2)E4K0 0.8 6.0 4,000 146 131 58 125 1 35 2.2 C/6032-28 T495C225(1)035A(2)E750 0.8 6.0 750 383 345 153 125 1 35 3.3 B/3528-21 T495B335(1)035A(2)E1K0 1.2 6.0 1,000 292 263 117 125 1 35 3.3 B/3528-21 T495B335(1)035A(2)E900 1.2 6.0 900 307 276 123 125 1 35 3.3 C/6032-28 T495C335(1)035A(2)E525 1.2 6.0 525 458 412 183 125 1 35 3.3 C/6032-28 T495C335(1)035A(2)E550 1.2 6.0 550 447 402 179 125 1 35 3.3 C/6032-28 T495C335(1)035A(2)E600 1.2 6.0 600 428 385 171 125 1 35 4.7 B/3528-21 T495B475(1)035A(2)E850 1.6 6.0 850 316 284 126 125 1 35 4.7 B/3528-21 T495B475(1)035A(2)E1K0 1.6 6.0 1,000 292 263 117 125 1 35 4.7 C/6032-28 T495C475(1)035A(2)E450 1.6 6.0 450 494 445 198 125 1 35 4.7 C/6032-28 T495C475(1)035A(2)E500 1.6 6.0 500 469 422 188 125 1 35 4.7 C/6032-28 T495C475(1)035A(2)E600 1.6 6.0 600 428 385 171 125 1 35 4.7 D/7343-31 T495D475(1)035A(2)E300 1.6 6.0 300 707 636 283 125 1 35 6.8 C/6032-28 T495C685(1)035A(2)E1K8 2.4 6.0 1,800 247 222 99 125 1 35 6.8 D/7343-31 T495D685(1)035A(2)E150 2.4 6.0 150 1000 900 400 125 1 35 6.8 D/7343-31 T495D685(1)035A(2)E300 2.4 6.0 300 707 636 283 125 1 35 6.8 D/7343-31 T495D685(1)035A(2)E400 2.4 6.0 400 612 551 245 125 1 35 7 V/7343-20 T495V685(1)035A(2)E600 2.4 6.0 600 456 410 182 125 1 35 6.8 X/7343-43 T495X685(1)035A(2)E300 2.4 4.0 300 742 668 297 125 1 35 10 C/6032-28 T495C106(1)035A(2)E400 3.5 6.0 400 524 472 210 125 1 35 10 D/7343-31 T495D106(1)035A(2)E120 3.5 4.0 120 1118 1006 447 125 1 35 10 D/7343-31 T495D106(1)035A(2)E125 3.5 6.0 125 1095 986 438 125 1 35 10 D/7343-31 T495D106(1)035A(2)E130 3.5 6.0 130 1074 967 430 125 1 mΩ at 20°C mA at mA at Reflow (See below for µA +20°C % at +20°C mA at +25°C VDC at 85°C µF KEMET/EIA 100 kHz +85°C 100 +125°C 100 °C Temp part options) Max/5 Min 120 Hz Max 100 kHz Max kHz kHz ≤ 260°C Maximum Rated Rated Case Code/ DC Maximum Allowable KEMET Part Number DF ESR Operating MSL Voltage Cap Case Size Leakage Ripple Current (rms) Temp (1) To complete KEMET part number, insert M for ±20% or K for ±10%. Designates capacitance tolerance. (2) To complete KEMET part number, insert T = 100% Matte Tin (Sn) Plated, G = Gold Plated, H = Standard Solder coated (SnPb 5% Pb minimum), N = Non-Magnetic 100% Tin (Sn) or M = Non-Magnetic (SnPb). Designates termination finish. Refer to Ordering Information for additional detail. Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitution will be marked with the higher voltage rating. Substitutions can include better than series. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2009_T495 • 12/12/2019 16 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

Tantalum Surface Mount Capacitors – Low ESR T495 Surge Robust MnO 2 Table 1 – Ratings & Part Number Reference cont. Case Maximum Rated Rated KEMET Part DC Maximum Allowable Code/ DF ESR Operating MSL Voltage Cap Number Leakage Ripple Current (rms) Case Size Temp mΩ at 20°C mA at mA at mA at Reflow (See below for µA +20°C % at +20°C VDC at 85°C µF KEMET/EIA 100 kHz +25°C 100 +85°C 100 +125°C 100 °C Temp part options) Max/5 Min 120 Hz Max Max kHz kHz kHz ≤ 260°C 35 10 D/7343-31 T495D106(1)035A(2)E250 3.5 6.0 250 775 698 310 125 1 35 10 D/7343-31 T495D106(1)035A(2)E260 3.5 6.0 260 760 684 304 125 1 35 10 D/7343-31 T495D106(1)035A(2)E300 3.5 6.0 300 707 636 283 125 1 35 10 D/7343-31 T495D106(1)035A(2)E1K0 3.5 6.0 1,000 387 348 155 125 1 35 10 V/7343-20 T495V106(1)035A(2)E600 3.5 6.0 600 456 410 182 125 1 35 10 X/7343-43 T495X106(1)035A(2)E175 3.5 6.0 175 971 874 388 125 1 35 10 X/7343-43 T495X106(1)035A(2)E200 3.5 6.0 200 908 817 363 125 1 35 10 X/7343-43 T495X106(1)035A(2)E250 3.5 4.0 250 812 731 325 125 1 35 10 X/7343-43 T495X106(1)035A(2)E260 3.5 4.0 260 797 717 319 125 1 35 15 C/6032-28 T495C156(1)035A(2)E350 5.3 6.0 350 561 505 224 125 1 35 15 D/7343-31 T495D156(1)035A(2)E225 5.3 6.0 225 816 734 326 125 1 35 15 D/7343-31 T495D156(1)035A(2)E260 5.3 6.0 260 760 684 304 125 1 35 15 D/7343-31 T495D156(1)035A(2)E300 5.3 6.0 300 707 636 283 125 1 35 15 X/7343-43 T495X156(1)035A(2)E200 5.3 6.0 200 908 817 363 125 1 35 15 X/7343-43 T495X156(1)035A(2)E225 5.3 6.0 225 856 770 342 125 1 35 15 X/7343-43 T495X156(1)035A(2)E250 5.3 6.0 250 812 731 325 125 1 35 15 X/7343-43 T495X156(1)035A(2)E260 5.3 6.0 260 797 717 319 125 1 35 22 D/7343-31 T495D226(1)035A(2)E125 7.7 6.0 125 1095 986 438 125 1 35 22 D/7343-31 T495D226(1)035A(2)E200 7.7 6.0 200 866 779 346 125 1 35 22 D/7343-31 T495D226(1)035A(2)E250 7.7 6.0 250 775 698 310 125 1 35 22 D/7343-31 T495D226(1)035A(2)E260 7.7 6.0 260 760 684 304 125 1 35 22 D/7343-31 T495D226(1)035A(2)E300 7.7 6.0 300 707 636 283 125 1 35 22 X/7343-43 T495X226(1)035A(2)E125 7.7 6.0 125 1149 1034 460 125 1 35 22 X/7343-43 T495X226(1)035A(2)E130 7.7 6.0 130 1127 1014 451 125 1 35 22 X/7343-43 T495X226(1)035A(2)E180 7.7 6.0 180 957 861 383 125 1 35 22 X/7343-43 T495X226(1)035A(2)E200 7.7 6.0 200 908 817 363 125 1 35 22 X/7343-43 T495X226(1)035A(2)E260 7.7 6.0 260 797 717 319 125 1 35 22 X/7343-43 T495X226(1)035A(2)E275 7.7 6.0 275 775 698 310 125 1 35 22 X/7343-43 T495X226(1)035A(2)E300 7.7 6.0 300 742 668 297 125 1 35 33 D/7343-31 T495D336(1)035A(2)E200 11.6 6.0 200 866 779 346 125 1 35 33 D/7343-31 T495D336(1)035A(2)E300 11.6 6.0 300 707 636 283 125 1 35 33 X/7343-43 T495X336(1)035A(2)E100 11.6 6.0 100 1285 1157 514 125 1 35 33 X/7343-43 T495X336(1)035A(2)E175 11.6 6.0 175 971 874 388 125 1 35 33 X/7343-43 T495X336(1)035A(2)E250 11.6 6.0 250 812 731 325 125 1 35 33 X/7343-43 T495X336(1)035A(2)E260 11.6 6.0 260 797 717 319 125 1 35 33 E/7360-38 T495E336(1)035A(2)E200 11.6 6.0 200 1000 900 400 125 1 35 47 X/7343-43 T495X476(1)035A(2)E185 16.5 8.0 185 944 850 378 125 1 35 47 X/7343-43 T495X476(1)035A(2)E200 16.5 8.0 200 908 817 363 125 1 35 47 X/7343-43 T495X476(1)035A(2)E230 16.5 8.0 230 847 762 339 125 1 35 47 X/7343-43 T495X476(1)035A(2)E300 16.5 8.0 300 742 668 297 125 1 50 1 C/6032-28 T495C105(1)050A(2)E1K3 0.5 4.0 1,300 291 262 116 125 1 50 1 C/6032-28 T495C105(1)050A(2)E1K6 0.5 4.0 1,600 262 236 105 125 1 50 2.2 D/7343-31 T495D225(1)050A(2)E600 1.1 6.0 600 500 450 200 125 1 50 3.3 D/7343-31 T495D335(1)050A(2)E700 1.7 6.0 700 463 417 185 125 1 50 4.7 D/7343-31 T495D475(1)050A(2)E275 2.4 6.0 275 739 665 296 125 1 mΩ at 20°C mA at mA at Reflow (See below for µA +20°C % at +20°C mA at +25°C VDC at 85°C µF KEMET/EIA 100 kHz +85°C 100 +125°C 100 °C Temp part options) Max/5 Min 120 Hz Max 100 kHz Max kHz kHz ≤ 260°C Maximum Rated Rated Case Code/ DC Maximum Allowable KEMET Part Number DF ESR Operating MSL Voltage Cap Case Size Leakage Ripple Current (rms) Temp (1) To complete KEMET part number, insert M for ±20% or K for ±10%. Designates capacitance tolerance. (2) To complete KEMET part number, insert T = 100% Matte Tin (Sn) Plated, G = Gold Plated, H = Standard Solder coated (SnPb 5% Pb minimum), N = Non-Magnetic 100% Tin (Sn) or M = Non-Magnetic (SnPb). Designates termination finish. Refer to Ordering Information for additional detail. Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitution will be marked with the higher voltage rating. Substitutions can include better than series. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2009_T495 • 12/12/2019 17 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

Tantalum Surface Mount Capacitors – Low ESR T495 Surge Robust MnO 2 Table 1 – Ratings & Part Number Reference cont. Case Maximum Rated Rated KEMET Part DC Maximum Allowable Code/ DF ESR Operating MSL Voltage Cap Number Leakage Ripple Current (rms) Case Size Temp mΩ at 20°C mA at mA at mA at Reflow (See below for µA +20°C % at +20°C VDC at 85°C µF KEMET/EIA 100 kHz +25°C 100 +85°C 100 +125°C 100 °C Temp part options) Max/5 Min 120 Hz Max Max kHz kHz kHz ≤ 260°C 50 4.7 D/7343-31 T495D475(1)050A(2)E300 2.4 6.0 300 707 636 283 125 1 50 4.7 X/7343-43 T495X475(1)050A(2)E300 2.4 4.0 300 742 668 297 125 1 50 6.8 D/7343-31 T495D685(1)050A(2)E190 3.4 6.0 190 889 800 356 125 1 50 6.8 D/7343-31 T495D685(1)050A(2)E200 3.4 6.0 200 866 779 346 125 1 50 6.8 D/7343-31 T495D685(1)050A(2)E275 3.4 6.0 275 739 665 296 125 1 50 6.8 D/7343-31 T495D685(1)050A(2)E300 3.4 6.0 300 707 636 283 125 1 50 6.8 D/7343-31 T495D685(1)050A(2)E400 3.4 6.0 400 612 551 245 125 1 50 7 X/7343-43 T495X685(1)050A(2)E300 3.4 6.0 300 742 668 297 125 1 50 10 X/7343-43 T495X106(1)050A(2)E250 5.0 8.0 250 812 731 325 125 1 50 10 X/7343-43 T495X106(1)050A(2)E260 5.0 6.0 260 797 717 319 125 1 50 10 X/7343-43 T495X106(1)050A(2)E300 5.0 6.0 300 742 668 297 125 1 50 15 X/7343-43 T495X156(1)050A(2)E200 7.5 6.0 200 908 817 363 125 1 50 15 X/7343-43 T495X156(1)050A(2)E250 7.5 6.0 250 812 731 325 125 1 50 15 X/7343-43 T495X156(1)050A(2)E300 7.5 6.0 300 742 668 297 125 1 mΩ at 20°C mA at mA at Reflow (See below for µA +20°C % at +20°C mA at +25°C VDC at 85°C µF KEMET/EIA 100 kHz +85°C 100 +125°C 100 °C Temp part options) Max/5 Min 120 Hz Max 100 kHz Max kHz kHz ≤ 260°C Maximum Rated Rated Case Code/ DC Maximum Allowable KEMET Part Number DF ESR Operating MSL Voltage Cap Case Size Leakage Ripple Current (rms) Temp (1) To complete KEMET part number, insert M for ±20% or K for ±10%. Designates capacitance tolerance. (2) To complete KEMET part number, insert T = 100% Matte Tin (Sn) Plated, G = Gold Plated, H = Standard Solder coated (SnPb 5% Pb minimum), N = Non-Magnetic 100% Tin (Sn) or M = Non-Magnetic (SnPb). Designates termination finish. Refer to Ordering Information for additional detail. Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitution will be marked with the higher voltage rating. Substitutions can include better than series. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2009_T495 • 12/12/2019 18 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

Tantalum Surface Mount Capacitors – Low ESR T495 Surge Robust MnO 2 Recommended Voltage Derating Guidelines −55°C to 85°C 85°C to 125°C 120% % Change in working 100% DC voltage with V 67% of V temperature R R age Recommended olt 80% % Change in Working DC Voltage V maximum application 50% of VR 33% of VR ng with Temperature 67% voltage ki 60% or W % 40% Recommended Maximum Application Voltage 33% (As % of Rated Voltage) 20% 0% −55 25 85 125 Temperature (ºC ) Ripple Current/Ripple Voltage Permissible AC ripple voltage and current are related to Maximum Power equivalent series resistance (ESR) and the power dissipation KEMET EIA Dissipation (P max) capabilities of the device. Permissible AC ripple voltage Case Code Case Code mWatts at 25°C which may be applied is limited by two criteria: w/+20°C Rise 1. The positive peak AC voltage plus the DC bias voltage, A 3216–18 75 if any, must not exceed the DC voltage rating of the B 3528–21 85 capacitor. C 6032–28 110 2. The negative peak AC voltage in combination with D 7343–31 150 X 7343–43 165 bias voltage, if any, must not exceed the allowable limits E 7360–38 200 specified for reverse voltage. See the Reverse Voltage S 3216–12 60 section for allowable limits. T 3528–12 70 The maximum power dissipation by case size can be U 6032–15 90 determined using the table at right. The maximum power V 7343–20 125 dissipation rating stated in the table must be reduced with T510X 7343–43 270 increasing environmental operating temperatures. Refer to T510E 7360–38 285 the table below for temperature compensation requirements. Using the P max of the device, the maximum allowable rms Temperature Compensation Multipliers ripple current or voltage may be determined. for Maximum Ripple Current I(max) = √P max/R T ≤ 25°C T ≤ 85°C T ≤ 125°C E(max) = Z √P max/R 1.00 0.90 0.40 T = Environmental Temperature I = rms ripple current (amperes) E = rms ripple voltage (volts) The maximum power dissipation rating must be reduced with increasing P max = maximum power dissipation (watts) environmental operating temperatures. Refer to the Temperature R = ESR at specified frequency (ohms) Z = Impedance at specified frequency (ohms) Compensation Multiplier table for details. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2009_T495 • 12/12/2019 19 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

Tantalum Surface Mount Capacitors – Low ESR T495 Surge Robust MnO 2 Reverse Voltage Solid tantalum capacitors are polar devices and may be permanently damaged or destroyed if connected with the wrong polarity. The positive terminal is identified on the capacitor body by a stripe plus in some cases a beveled edge. A small degree of transient reverse voltage is permissible for short periods per the table. The capacitors should not be operated continuously in reverse mode, even within these limits. Temperature Permissible Transient Reverse Voltage 25°C 15% of Rated Voltage 85°C 5% of Rated Voltage 125°C 1% of Rated Voltage Table 2 – Land Dimensions/Courtyard Metric Density Level A: Density Level B: Density Level C: KEMET Size Maximum (Most) Land Median (Nominal) Land Minimum (Least) Land Code Protrusion (mm) Protrusion (mm) Protrusion (mm) Case EIA W L S V1 V2 W L S V1 V2 W L S V1 V2 A 3216–18 1.35 2.20 0.62 6.02 2.80 1.23 1.80 0.82 4.92 2.30 1.13 1.42 0.98 4.06 2.04 B 3528–21 2.35 2.21 0.92 6.32 4.00 2.23 1.80 1.12 5.22 3.50 2.13 1.42 1.28 4.36 3.24 M 3528-15 2.35 2.20 0.92 6.32 4.00 2.23 1.80 1.12 5.22 3.50 2.13 1.42 1.28 4.36 3.24 C 6032–28 2.35 2.77 2.37 8.92 4.50 2.23 2.37 2.57 7.82 4.00 2.13 1.99 2.73 6.96 3.74 U 6032–15 2.35 2.77 2.37 8.92 4.50 2.23 2.37 2.57 7.82 4.00 2.13 1.99 2.73 6.96 3.74 D 7343–31 2.55 2.77 3.67 10.22 5.60 2.43 2.37 3.87 9.12 5.10 2.33 1.99 4.03 8.26 4.84 E1 7360–38 4.25 2.77 3.67 10.22 7.30 4.13 2.37 3.87 9.12 6.80 4.03 1.99 4.03 8.26 6.54 T 3528–12 2.35 2.20 0.92 6.32 4.00 2.23 1.80 1.12 5.22 3.50 2.13 1.42 1.28 4.36 3.24 V 7343–21 2.55 2.77 3.67 10.22 5.60 2.43 2.37 3.87 9.12 5.10 2.33 1.99 4.03 8.26 4.84 X1 7343–43 2.55 2.77 3.67 10.22 5.60 2.43 2.37 3.87 9.12 5.10 2.33 1.99 4.03 8.26 4.84 Density Level A: For low-density product applications. Recommended for wave solder applications and provides a wider process window for reflow solder processes. Density Level B: For products with a moderate level of component density. Provides a robust solder attachment condition for reflow solder processes. Density Level C: For high component density product applications. Before adapting the minimum land pattern variations the user should perform qualification testing based on the conditions outlined in IPC standard 7351 (IPC–7351). ¹ Height of these chips may create problems in wave soldering. 2 Land pattern geometry is too small for silkscreen outline. V1 L L W W V2 S Grid Placement Courtyard © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2009_T495 • 12/12/2019 20 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

Tantalum Surface Mount Capacitors – Low ESR T495 Surge Robust MnO 2 Soldering Process The KEMET families of surface mount capacitors are Profile Feature SnPb Assembly Pb-Free Assembly compatible with wave (single or dual), convection, IR, or vapor Preheat/Soak phase reflow techniques. Preheating of these components Temperature Minimum (T ) 100°C 150°C is recommended to avoid extreme thermal stress. KEMET's Smin Temperature Maximum (T ) 150°C 200°C recommended profile conditions for convection and IR Smax Time (t) from T to T ) 60 – 120 seconds 60 – 120 seconds reflow reflect the profile conditions of the IPC/J–STD–020D s smin smax Ramp-up Rate (T to T) 3°C/second maximum 3°C/second maximum standard for moisture sensitivity testing. The devices can L P Liquidous Temperature (T) 183°C 217°C safely withstand a maximum of three reflow passes at these L Time Above Liquidous (t) 60 – 150 seconds 60 – 150 seconds conditions. L 220°C* 250°C* Peak Temperature (T) P 235°C** 260°C** Time within 5°C of Maximum Please note that although the X/7343–43 case size can Peak Temperature (t) 20 seconds maximum 30 seconds maximum P withstand wave soldering, the tall profile (4.3 mm maximum) Ramp-down Rate (T to T) 6°C/second maximum 6°C/second maximum P L dictates care in wave process development. Time 25°C to Peak 6 minutes maximum 8 minutes maximum Temperature Note: All temperatures refer to the center of the package, measured on the Hand soldering should be performed with care due to the package body surface that is facing up during assembly reflow. difficulty in process control. If performed, care should be * For Case Size height > 2.5 mm taken to avoid contact of the soldering iron to the molded ** For Case Size height ≤ 2.5 mm case. The iron should be used to heat the solder pad, applying solder between the pad and the termination, until reflow T P t occurs. Once reflow occurs, the iron should be removed Maximum Ramp-up Rate = 3°C/second P Maximum Ramp-down Rate = 6°C/second immediately. “Wiping” the edges of a chip and heating the top T surface is not recommended. re L tL u rat Tsmax e During typical reflow operations, a slight darkening of the mp T e smin t gold-colored epoxy may be observed. This slight darkening is T s normal and not harmful to the product. Marking permanency is not affected by this change. 25 25°C to Peak Time Storage Tantalum chip capacitors should be stored in normal working environments. While the chips themselves are quite robust in other environments, solderability will be degraded by exposure to high temperatures, high humidity, corrosive atmospheres, and long term storage. In addition, packaging materials will be degraded by high temperature – reels may soften or warp and tape peel force may increase. KEMET recommends that maximum storage temperature not exceed 40°C and maximum storage humidity not exceed 60% relative humidity. Temperature fluctuations should be minimized to avoid condensation on the parts and atmospheres should be free of chlorine and sulphur bearing compounds. For optimized solderability, chip stock should be used promptly, preferably within three years of receipt. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2009_T495 • 12/12/2019 21 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

Tantalum Surface Mount Capacitors – Low ESR T495 Surge Robust MnO 2 Construction Molded Epoxy Polarity Stripe (+) Detailed Cross Section Case Silver Paint Polarity (Fourth Layer) Bevel (+) Tantalum Wire Leadframe (− Cathode) Washer Tantalum Wire Weld (to attach wire) Carbon (Third Layer) Washer Silver Adhesive TaO Dielectric 2 5 Molded Epoxy Leadframe MnO2 (First Layer) Case (+ Anode) (Second Layer) Tantalum Capacitor Marking Date Code * 1st digit = last number of year 5 = 2015 6 = 2016 Polarity 7 = 2017 Indicator (+) 8 = 2018 9 = 2019 Picofarad 2nd and 3rd digit = week of the 01 = 1st week of the year to Code year 52 = 52nd week of the year Rated KEMET Voltage ID Date Code* * 908 = 8th week of 2019 © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2009_T495 • 12/12/2019 22 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

Tantalum Surface Mount Capacitors – Low ESR T495 Surge Robust MnO 2 Tape & Reel Packaging Information KEMET’s molded chip capacitor families are packaged in 8 and 12 mm plastic tape on 7" and 13" reels in accordance with EIA Standard 481: Embossed Carrier Taping of Surface Mount Components for Automatic Handling. This packaging system is compatible with all tape-fed automatic pick-and-place systems. Right hand orientation only Embossed carrier (+) (−) Embossment Top tape thickness 0.10 mm (0.004”) 8 mm (0.315”) or 180 mm (7.0”) or maximum thickness 12 mm (0.472”) 330 mm (13.”) Table 3 – Packaging Quantity Tape Width Case Code 7" Reel* 13" Reel* (mm) KEMET EIA S 3216-12 8 2,500 10,000 T 3528-12 8 3,000 10,000 M 3528-15 8 2,500 8,000 U 6032-15 12 1,000 5,000 L 6032-19 12 1,000 3,000 W 7343-15 12 1,000 3,000 Z 7343-17 12 1,000 3,000 V 7343-20 12 1,000 3,000 A 3216-18 8 2,000 9,000 B 3528-21 8 2,000 8,000 C 6032-28 12 500 3,000 D 7343-31 12 500 2,500 Q 7343-12 12 1,000 3,000 Y 7343-40 12 500 2,000 X 7343-43 12 500 2,000 E/T428P 7360-38 12 500 2,000 H 7360-20 12 1,000 2,500 O 7360-43 12 250 1,000 * No C-Spec required for 7" reel packaging. C-7280 required for 13" reel packaging. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2009_T495 • 12/12/2019 23 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

Tantalum Surface Mount Capacitors – Low ESR T495 Surge Robust MnO 2 Figure 1 – Embossed (Plastic) Carrier Tape Dimensions T P 2 T2 ØD0 P0 t(o1l0e rpaintcchee osn c tuampuel a±0ti.v2e mm) E1 A 0 F K 0 W B1 B0 E2 S P 1 1 T1 Center Lines of Cavity ØD Embossment 1 For cavity size, Cover Tape see Note 1, Table 4 B is for tape feeder reference only, 1 including draft concentric about B0. User Direction of Unreeling Table 4 – Embossed (Plastic) Carrier Tape Dimensions Metric will govern Constant Dimensions — Millimeters (Inches) D Minimum R Reference S Minimum T Tape Size D 1 E P P 1 T Maximum 1 0 Note 1 1 0 2 Note 2 Note 3 Maximum 1.0 25.0 8 mm (0.039) (0.984) 1.5 +0.10/−0.0 1.75 ±0.10 4.0 ±0.10 2.0 ±0.05 0.600 0.600 0.100 (0.059 +0.004/−0.0) (0.069 ±0.004) (0.157 ±0.004) (0.079 ±0.002) (0.024) (0.024) (0.004) 1.5 30 12 mm (0.059) (1.181) Variable Dimensions — Millimeters (Inches) B Maximum Tape Size Pitch 1 E Minimum F P T Maximum W Maximum A, B & K Note 4 2 1 2 0 0 0 4.35 6.25 3.5 ±0.05 2.0 ±0.05 or 4.0 ±0.10 2.5 8.3 8 mm Single (4 mm) (0.171) (0.246) (0.138 ±0.002) (0.079 ±0.002 or 0.157 ±0.004) (0.098) (0.327) Single (4 mm) 2.0 ±0.05 (0.079 ±0.002) or Note 5 8.2 10.25 5.5 ±0.05 4.6 12.3 12 mm and Double 4.0 ±0.10 (0.157 ±0.004) or (0.323) (0.404) (0.217 ±0.002) (0.181) (0.484) (8 mm) 8.0 ±0.10 (0.315 ±0.004) 1. The embossment hole location shall be measured from the sprocket hole controlling the location of the embossment. Dimensions of embossment location and hole location shall be applied independent of each other. 2. The tape, with or without components, shall pass around R without damage (see Figure 4). 3. If S < 1.0 mm, there may not be enough area for cover tape to be properly applied (see EIA Standard 481–D, paragraph 4.3, section b). 1 4. B dimension is a reference dimension for tape feeder clearance only. 1 5. The cavity defi ned by A, B and K shall surround the component with suffi cient clearance that: 0 0 0 (a) the component does not protrude above the top surface of the carrier tape. (b) the component can be removed from the cavity in a vertical direction without mechanical restriction, after the top cover tape has been removed. (c) rotation of the component is limited to 20° maximum for 8 and 12 mm tapes (see Figure 2). (d) lateral movement of the component is restricted to 0.5 mm maximum for 8 mm and 12 mm wide tape (see Figure 3). (e) see Addendum in EIA Standard 481–D for standards relating to more precise taping requirements. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2009_T495 • 12/12/2019 24 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

Tantalum Surface Mount Capacitors – Low ESR T495 Surge Robust MnO 2 Packaging Information Performance Notes 1. Cover tape break force: 1.0 kg minimum. 2. Cover tape peel strength: The total peel strength of the cover tape from the carrier tape shall be: Tape Width Peel Strength 8 mm 0.1 to 1.0 newton (10 to 100 gf) 12 mm 0.1 to 1.3 newton (10 to 130 gf) The direction of the pull shall be opposite the direction of the carrier tape travel. The pull angle of the carrier tape shall be 165° to 180° from the plane of the carrier tape. During peeling, the carrier and/or cover tape shall be pulled at a velocity of 300 ±10 mm/minute. 3. Labeling: Bar code labeling (standard or custom) shall be on the side of the reel opposite the sprocket holes. Refer to EIA Standards 556 and 624. Figure 2 – Maximum Component Rotation ° T Maximum Component Rotation Maximum Component Rotation Top View Side View Typical Pocket Centerline Tape Maximum ° Width (mm) Rotation ( °) s T 8, 12 20 Bo Tape Maximum Width (mm) Rotation ( °) S 8, 12 20 Typical Component Centerline Ao Figure 3 – Maximum Lateral Movement Figure 4 – Bending Radius 8 mm & 12 mm Tape Embossed Punched Carrier Carrier 0.5 mm maximum 0.5 mm maximum Bending R R Radius © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2009_T495 • 12/12/2019 25 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

Tantalum Surface Mount Capacitors – Low ESR T495 Surge Robust MnO 2 Figure 5 – Reel Dimensions W Full Radius, (Includes Access Hole at 3 See Note Slot Location flange distortion (Ø 40 mm minimum) at outer edge) W (Measured at hub) 2 A D (See Note) N C (Arbor hole W (Measured at hub) diameter) 1 If present, tape slot in core for tape start: 2.5 mm minimum width x 10.0 mm minimum depth B (see Note) Note: Drive spokes optional; if used, dimensions B and D shall apply. Table 5 – Reel Dimensions Metric will govern Constant Dimensions — Millimeters (Inches) Tape Size A B Minimum C D Minimum 178 ±0.20 8 mm (7.008 ±0.008) 1.5 13.0 +0.5/−0.2 20.2 or (0.059) (0.521 +0.02/−0.008) (0.795) 12 mm 330 ±0.20 (13.000 ±0.008) Variable Dimensions — Millimeters (Inches) Tape Size N Minimum W W Maximum W 1 2 3 8.4 +1.5/−0.0 14.4 8 mm 50 (0.331 +0.059/−0.0) (0.567) Shall accommodate tape (1.969) 12.4 +2.0/−0.0 18.4 width without interference 12 mm (0.488 +0.078/−0.0) (0.724) © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2009_T495 • 12/12/2019 26 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

Tantalum Surface Mount Capacitors – Low ESR T495 Surge Robust MnO 2 Figure 6 – Tape Leader & Trailer Dimensions Embossed Carrier Punched Carrier Carrier Tape 8 mm & 12 mm only Round Sprocket Holes END START Top Cover Tape Elongated Sprocket Holes (32 mm tape and wider) 100 mm minimum Leader Trailer Components 400 mm minimum 160 mm minimum Top Cover Tape Figure 7 – Maximum Camber Elongated Sprocket Holes Carrier Tape (32 mm & wider tapes) Round Sprocket Holes 1 mm maximum, either direction Straight Edge 250 mm © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2009_T495 • 12/12/2019 27 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

Tantalum Surface Mount Capacitors – Low ESR T495 Surge Robust MnO 2 KEMET Electronics Corporation Sales Offi ces For a complete list of our global sales offi ces, please visit www.kemet.com/sales. Disclaimer All product specifi cations, statements, information and data (collectively, the “Information”) in this datasheet are subject to change. The customer is responsible for checking and verifying the extent to which the Information contained in this publication is applicable to an order at the time the order is placed. All Information given herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied. Statements of suitability for certain applications are based on KEMET Electronics Corporation’s (“KEMET”) knowledge of typical operating conditions for such applications, but are not intended to constitute – and KEMET specifi cally disclaims – any warranty concerning suitability for a specifi c customer application or use. The Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by KEMET with reference to the use of KEMET’s products is given gratis, and KEMET assumes no obligation or liability for the advice given or results obtained. Although KEMET designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage. Although all product–related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicted or that other measures may not be required. KEMET is a registered trademark of KEMET Electronics Corporation. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2009_T495 • 12/12/2019 28 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: K EMET: T495X108K004ATE070 T495D336K025ATE300 T495D475M050ATE300 T495D226K035ATE300 T495X157K010ATE100 T495X157K016ATE100 T495C337K004ATE700 T495X106M050ATE300 T495X337K010ATE060 T495D475K050ATE300 T495V107M006ATE150 T495V107K006ATE150 T495X686K010ATE150 T495D685K035ATE400 T495X156M050ATE300 T495X156K050ATE300 T495C157M006ATE200 T495X686M010ATE150 T495D686K020ATE150 T495X476M025ATE200 T495D686K016ATE150 T495X476K035ATE300 T495D227M010ATE125 T495X157K006ATE100 T495D685M050ATE300 T495D477K006ATE125 T495X156M025ATE200 T495D685K050ATE300 T495X156K035ATE225 T495X156K025ATE200 T495C686K010ATE225 T495D476K020ATE175 T495D156M020ATE275 T495D156M025ATE275 T495D156K025ATE275 T495D156K020ATE275 T495D337M010ATE125 T495D227K010ATE125 T495D337K010ATE125 T495X686K025ATE200 T495X106K050ATE300 T495D686M020ATE150 T495C686M010ATE225 T495X106K035AHE250 T495X336M025AHE175 T495D475M050AHE300 T495X107K010AHE100 T495X226K025AHE225 T495X226M035AHE275 T495X226M025AHE225 T495X685K035AHE300 T495D336M016AHE225 T495D226K020AHE225 T495X477K004ATE030 T495X477M004ATE030 T495X477M004ATE045 T495X477K004ATE045 T495V686K010ATE100 T495V686M010ATE100 T495D475M050ATE275 T495D475K050ATE275 T495X477M006AHE045 T495X477K006AHE045 T495X477K006AHE030 T495X477M006AHE030 T495X337M006ATE045 T495X337K006ATE045 T495X686K025AHE125 T495X686K025ATE125 T495D226M025AHE200 T495X476M020AHE150 T495X476K020AHE150 T495X107K016AHE100 T495X686M020AHE150 T495D107M010AHE100 T495D107M016AHE125 T495D107K016AHE125 T495X477K006ATE045 T495X477M006ATE045 T495X477M006ATE030 T495X477K006ATE030 T495X337K006AHE045 T495X337M006AHE045 T495D336M025AHE090 T495D336K025AHE090 T495V686K010AHE100 T495V686M010AHE100 T495D476K020AHE100 T495D476M020AHE100 T495D107M010ATE080 T495D475K050AHE275 T495D475M050AHE275 T495X477K004ATE100 T495X477M004ATE100 T495D685K050AHE300 T495X106K050AHE300 T495X475M050AHE300 T495C227M006ATE225 T495D227K006AHE100 T495D337M006ATE100