Tantalum Surface Mount Capacitors – Standard Tantalum T491 Industrial Grade MnO 2 Overview The KEMET T491, designed specifically for today’s highly time at ≤ 30°C/85% RH. The T491 standard terminations are automated surface mount processes and equipment, is available in 100% matte tin and provide excellent wetting the leading choice for surface mount designs. The T491 characteristics and compatibility with today's surface mount combines KEMET’s proven solid tantalum technology, solder systems. Tin/lead (Sn/Pb) terminations are available acclaimed and respected throughout the world, with the upon request for any part number. Gold-plated terminations latest in materials, processes and automation, resulting are also available for use with conductive epoxy attachment in unsurpassed total performance and value. This product processes. Standard packaging of these devices is Tape meets or exceeds the requirements of EIA standard & Reel in accordance with EIA 481. This system provides 535BAAC. The T491 is classified as moisture sensitivity perfect compatibility with all tape-fed placement units. level (MSL) 1 under J STD 020, with unlimited floor life Benefits • Meets or exceeds EIA Standard 535BAAC • Taped and reeled per EIA-481 • Symmetrical, compliant terminations • Optional gold-plated terminations • Laser-marked case • 100% surge current test on C, D, E, U, V, and X sizes • Halogen free epoxy • Capacitance 0.1 to 1,000 µF • Tolerance ±10%, ±20% • Voltage 2.5 – 50 VDC • Extended range values • Low profile case sizes • RoHS compliant and lead-free terminations • Operating temperature range of −55°C to +125°C Applications Typical applications include decoupling and filtering in industrial and automotive end applications, such as DC/DC converters, portable electronics, telecommunications, and control units. Environmental Compliance RoHS compliant (6/6) according to Directive 2002/95/EC when ordered with 100% Sn solder, Gold-plated or Non-magnetic 100% Sn solder. One world. One KEMET © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2005_T491 • 12/12/2019 1 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

Tantalum Surface Mount Capacitors – Standard Tantalum T491 Industrial Grade MnO 2 K-SIM For a detailed analysis of specific part numbers, please visit ksim.kemet.com to access KEMET’s K-SIM software. KEMET K-SIM is designed to simulate behavior of components with respect to frequency, ambient temperature, and DC bias levels. Ordering Information T 491 X 157 K 020 A T Rated Capacitor Case Capacitance Capacitance Failure Rate/ Packaging Series Voltage Termination Finish Class Size Code (pF) Tolerance Design (C-Spec) (VDC) T = Industrial A, B, First two digits K = ±10% 2R5 = 2.5 A = T = 100% Matte tin (Sn)-plated Blank = 7" reel Tantalum C, D, represent M = ±20% 003 = 3 N/A H = Standard solder coated 7280 = 13" reel E, M, significant 004 = 4 (SnPb 5% Pb minimum) S, T, figures. Third 006 = 6.3 G = Gold-plated U, V, digit specifies 010 = 10 (A, B, C, D, X only) W, X number of 016 = 16 N = Non-magnetic 100% tin (Sn) zeros. 020 = 20 M = Non-magnetic (SnPb) 025 = 25 035 = 35 050 = 50 Performance Characteristics Item Performance Characteristics Operating Temperature −55°C to 125°C Rated Capacitance Range 0.1 – 1,000 µF at 120 Hz/25°C Capacitance Tolerance K tolerance (10%), M tolerance (20%) Rated Voltage Range 2.5 – 50 V DF (120 Hz) Refer to Part Number Electrical Specification Table ESR (100 kHz) Refer to Part Number Electrical Specification Table Leakage Current ≤ 0.01 CV (µA) at rated voltage after 5 minutes © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2005_T491 • 12/12/2019 22 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

Tantalum Surface Mount Capacitors – Standard Tantalum T491 Industrial Grade MnO 2 Qualification Test Condition Characteristics Δ C/C Within ±10% of initial value 85°C at rated voltage, 2,000 hours DF Within initial limits Endurance 125°C at 2/3 rated voltage, 2,000 hours DCL Within 1.25 x initial limit ESR Within initial limits Δ C/C Within ±10% of initial value DF Within initial limits Storage Life 125°C at 0 volts, 2,000 hours DCL Within 1.25 x initial limit ESR Within initial limits Δ C/C Within ±5% of initial value MIL-STD-202, Method 107, Condition B, mounted, −55°C DF Within initial limits Thermal Shock to 125°C, 1,000 cycles DCL Within 1.25 x initial limit ESR Within initial limits +25°C −55°C +85°C +125°C Extreme temperature exposure at a succession of continuous steps at Δ C/C IL* ±10% ±10% ±20% Temperature Stability +25°C, −55°C, +25°C, +85°C, +125°C, DF IL IL 1.5 x IL 1.5 x IL +25°C. DCL IL N/A 10 x IL 12 x IL Δ C/C Within ±5% of initial value 85°C, 1.32 x rated voltage 1,000 cycles DF Within initial limits Surge Voltage (125°C, 1.2 x rated voltage). DCL Within initial limits ESR Within initial limits Δ C/C Within ±10% of initial value MIL-STD-202, Method 213, Condition I, 100 G peak Mechanical Shock/ MIL-STD-202, Method 204, Condition D, 10 Hz to DF Within initial limits Vibration 2,000 Hz, 20 G peak DCL Within initial limits *IL = Initial limit © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2005_T491 • 12/12/2019 33 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

Tantalum Surface Mount Capacitors – Standard Tantalum T491 Industrial Grade MnO 2 Electrical Characteristics ESR vs. Frequency Capacitance vs. Frequency 100 1,000 T491C336M025AT_IMP T491D476M025AT_IMP T491C336M025AT s)10 T491X107M025AT_IMP T491D476M025AT hm T491C336M025AT_ESR T491X107M025AT mpedance, ESR (O0.11 TT449911DX140776MM002255AATT__EESSRR Capacitance (µF) 11000 I 0.01 1 100 1,000 10,000 100,000 1,000,000 10,000,000 100 1,000 10,000 100,000 1,000,000 10,000,000 Frequency ( Hz) Frequency (H z) Dimensions – Millimeters (Inches) Metric will govern CATHODE (-) END VIEW SIDE VIEW ANODE (+) END VIEW BOTTOM VIEW A W B B H E F P Termination cutout X T S G S at KEeMitEhTer's e onpdtion, R L Case Size Component F ±0.1 B ±0.15 X P R T A G E KEMET EIA L W H S ±(0.004) (Ref)±0.006 (Ref) (Ref) (Ref) (Ref) (Min) (Ref) (Ref) A 3216–18 3.2 ±0.2 1.6 ±0.2 1.6 ±0.2 1.2 0.80(0.032) 0.4 0.10 ±0.10 0.4 0.4 0.13 1.2 1.1 1.3 (0.126 ±0.008) (0.063 ±0.008) (0.063 ±0.008) (0.047) +0.2(0.008)/−0.3(0.011) (0.016) (0.004 ±0.004) (0.016) (0.016) (0.005) (0.047) (0.043) (0.051) B 3528–21 3.5 ±0.2 2.8 ±0.2 1.9 ±0.2 2.2 0.80(0.032) 0.4 0.10 ±0.10 0.5 1.0 0.13 1.9 1.8 2.2 (0.138 ±0.008) (0.110 ±0.008) (0.075 ±0.008) (0.087) +0.1(0.004)/−0.3(0.011) (0.016) (0.004 ±0.004) (0.020) (0.039) (0.005) (0.075) (0.071) (0.087) C 6032–28 6.0 ±0.3 3.2 ±0.3 2.5 ±0.3 2.2 1.30 (0.051) 0.5 0.10 ±0.10 0.9 1.0 0.13 2.9 2.8 2.4 (0.236 ±0.012) (0.126 ±0.012) (0.098 ±0.012) (0.087) ±0.3 (0.011) (0.020) (0.004 ±0.004) (0.035) (0.039) (0.005) (0.114) (0.110) (0.094) D 7343–31 7.3 ±0.3 4.3 ±0.3 2.8 ±0.3 2.4 1.30 (0.051) 0.5 0.10 ±0.10 0.9 1.0 0.13 3.6 3.5 3.5 (0.287 ±0.012) (0.169 ±0.012) (0.110 ±0.012) (0.094) ±0.3 (0.011) (0.020) (0.004 ±0.004) (0.035) (0.039) (0.005) (0.142) (0.138) (0.138) X 7343–43 7.3 ±0.3 4.3 ±0.3 4.0 ±0.3 2.4 1.30 (0.051) 0.5 0.10 ±0.10 1.7 1.0 0.13 3.6 3.5 3.5 (0.287 ±0.012) (0.169 ±0.012) (0.157 ±0.012) (0.094) ±0.3 (0.011) (0.020) (0.004 ±0.004) (0.067) (0.039) (0.005) (0.142) (0.138) (0.138) E 7360–38 7.3 ±0.3 6.0 ±0.3 3.6 ±0.2 4.1 1.30 (0.051) 0.5 0.10 ±0.10 N/A N/A 0.13 3.6 3.5 3.5 (0.287 ±0.012) (0.236 ±0.012) (0.142 ±0.008) (0.161) ±0.3 (0.011) (0.020) (0.004 ±0.004) (0.005) (0.142) (0.138) (0.138) M 3528–15 3.5 ±0.2 2.8 ±0.2 1.4 ±0.1 2.2 0.8 N/A 0.05 N/A N/A 0.13 1.9 1.8 2.2 (0.138 ±0.008) (0.110 ±0.008) (0.055 ±0.004) (.087) (0.031) (0.002) (.005) (0.075) (.071) (.087) S 3216–12 3.2 ±0.2 1.6 ±0.2 1.2 1.2 0.80(0.032) N/A 0.05 N/A N/A 0.13 1.2 1.1 1.3 (0.126 ±0.008) (0.063 ±0.008) (0.047) (0.047) +0.2(0.008)/−0.3(0.011) (0.002) (0.005) (0.047) (0.043) (0.051) T 3528–12 3.5 ±0.2 2.8 ±0.2 1.2 2.2 0.80(0.032) N/A 0.05 N/A N/A 0.13 1.9 1.8 2.2 (0.138 ±0.008) (0.110 ±0.008) (0.047) (0.087) +0.1(0.004)/−0.3(0.011) (0.002) (0.005) (0.075) (0.071) (0.087) U 6032–15 6.0 ±0.3 3.2 ±0.2 1.5 2.2 1.30 (0.051) N/A 0.05 N/A N/A 0.13 2.9 2.8 2.4 (0.236 ±0.012) (0.110 ±0.008) (0.059) (0.087) ±0.3 (0.011) (0.002) (0.005) (0.114) (0.110) (0.094) V 7343–20 7.3 ±0.3 4.3 ±0.3 2.0 2.4 1.30 (0.051) N/A 0.05 N/A N/A 0.13 3.6 3.5 3.5 (0.287 ±0.012) (0.169 ±0.012) (0.079) (0.094) ±0.3 (0.011) (0.002) (0.005) (0.142) (0.138) (0.138) W 7343–15 7.3 ±0.3 4.3 ±0.3 1.5 2.4 1.30 (0.051) N/A 0.05 N/A N/A 0.13 3.6 3.5 3.5 (0.287 ±0.012) (0.169 ±0.012) (0.059) (0.094) ±0.3 (0.011) (0.002) (0.005) (0.142) (.0138) (0.138) Notes: (Ref) – Dimensions provided for reference only. For low profile cases, no dimensions are provided for B, P or R because these cases do not have a bevel or a notch. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2005_T491 • 12/12/2019 44 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

Tantalum Surface Mount Capacitors – Standard Tantalum T491 Industrial Grade MnO 2 Table 1 – Ratings & Part Number Reference Case Maximum Rated Rated KEMET Part DC Maximum Allowable Code/ DF ESR Operating MSL Voltage Cap Number Leakage Ripple Current (rms) Case Size Temp µA at +20°C % at +20°C Ω at +20°C mA at mA at mA at (See below for Reflow Temp VDC at 85°C µF KEMET/EIA Maximum/ 120 Hz 100 kHz +25°C +85°C +125°C °C part options) ≤ 260 °C 5 Minutes Maximum Maximum 100 kHz 100 kHz 100 kHz 2.5 100 T/3528-12 T491T107(1)2R5A(2) 2.5 24.0 3.9 134 121 54 125 1 2.5 220 D/7343-31 T491D227(1)2R5A(2) 5.5 8.0 0.3 707 636 283 125 1 3 33 A/3216-18 T491A336(1)003A(2) 1.0 6.0 4.0 137 123 55 125 1 4 3.3 A/3216-18 T491A335(1)004A(2) 0.5 6.0 8.0 97 87 39 125 1 4 4.7 A/3216-18 T491A475(1)004A(2) 0.5 6.0 8.0 97 87 39 125 1 4 6.8 A/3216-18 T491A685(1)004A(2) 0.5 6.0 6.0 112 101 45 125 1 4 6.8 S/3216-12 T491S685(1)004A(2) 0.5 6.0 15.0 63 57 25 125 1 4 10 B/3528-21 T491B106(1)004A(2) 0.5 6.0 3.5 156 140 62 125 1 4 10 A/3216-18 T491A106(1)004A(2) 0.5 6.0 4.5 129 116 52 125 1 4 10 S/3216-12 T491S106(1)004A(2) 0.5 6.0 15.0 63 57 25 125 1 4 15 B/3528-21 T491B156(1)004A(2) 0.6 6.0 3.5 156 140 62 125 1 4 15 A/3216-18 T491A156(1)004A(2) 0.6 6.0 4.0 137 123 55 125 1 4 15 T/3528-12 T491T156(1)004A(2) 0.6 6.0 5.0 118 106 47 125 1 4 15 S/3216-12 T491S156(1)004A(2) 0.6 10.0 15.0 63 57 25 125 1 4 22 C/6032-28 T491C226(1)004A(2) 0.9 6.0 1.8 247 222 99 125 1 4 22 B/3528-21 T491B226(1)004A(2) 0.9 6.0 3.0 168 151 67 125 1 4 22 A/3216-18 T491A226(1)004A(2) 0.9 6.0 3.5 137 123 55 125 1 4 22 T/3528-12 T491T226(1)004A(2) 0.9 6.0 5.0 118 106 47 125 1 4 22 S/3216-12 T491S226(1)004A(2) 0.9 10.0 10.0 77 69 31 125 1 4 33 C/6032-28 T491C336(1)004A(2) 1.3 6.0 1.8 247 222 99 125 1 4 33 U/6032-15 T491U336(1)004A(2) 1.3 6.0 1.8 224 202 90 125 1 4 33 B/3528-21 T491B336(1)004A(2) 1.3 6.0 2.5 184 166 74 125 1 4 33 A/3216-18 T491A336(1)004A(2) 1.3 6.0 3.0 137 123 55 125 1 4 33 T/3528-12 T491T336(1)004A(2) 1.3 8.0 5.0 118 106 47 125 1 4 47 C/6032-28 T491C476(1)004A(2) 1.9 6.0 1.6 262 236 105 125 1 4 47 U/6032-15 T491U476(1)004A(2) 1.9 6.0 1.8 224 202 90 125 1 4 47 B/3528-21 T491B476(1)004A(2) 1.9 6.0 2.0 206 185 82 125 1 4 47 A/3216-18 T491A476(1)004A(2) 1.9 10.0 2.5 173 156 69 125 1 4 47 T/3528-12 T491T476(M)004A(2) 1.9 12.0 6.0 108 97 43 125 1 4 68 D/7343-31 T491D686(1)004A(2) 2.7 6.0 0.8 433 390 173 125 1 4 68 C/6032-28 T491C686(1)004A(2) 2.7 6.0 1.5 271 244 108 125 1 4 68 U/6032-15 T491U686(1)004A(2) 2.7 6.0 1.8 224 202 90 125 1 4 68 B/3528-21 T491B686(1)004A(2) 2.7 6.0 1.8 217 195 87 125 1 4 68 A/3216-18 T491A686(1)004A(2) 2.7 30.0 4.0 137 123 55 125 1 4 100 D/7343-31 T491D107(1)004A(2) 4.0 8.0 0.8 433 390 173 125 1 4 100 C/6032-28 T491C107(1)004A(2) 4.0 8.0 1.2 303 273 121 125 1 4 100 U/6032-15 T491U107(1)004A(2) 4.0 10.0 1.8 224 202 90 125 1 4 100 B/3528-21 T491B107(1)004A(2) 4.0 8.0 0.9 307 276 123 125 1 4 100 A/3216-18 T491A107(M)004A(2) 4.0 30.0 4.0 137 123 55 125 1 4 100 T/3528-12 T491T107(M)004A(2) 4.0 30.0 5.0 118 106 47 125 1 4 150 D/7343-31 T491D157(1)004A(2) 6.0 8.0 0.8 433 390 173 125 1 4 150 U/6032-15 T491U157(1)004AT 6.0 8.0 1.3 263 237 105 125 1 4 150 V/7343-20 T491V157(1)004A(2) 6.0 8.0 0.7 423 381 169 125 1 4 150 C/6032-28 T491C157(1)004A(2) 6.0 8.0 1.2 303 273 121 125 1 4 150 B/3528-21 T491B157(1)004A(2) 6.0 12.0 2.0 206 185 82 125 1 4 220 V/7343-20 T491V227(1)004A(2) 8.8 8.0 0.7 423 381 169 125 1 µA at +20°C % at +20°C Ω at +20°C mA at mA at mA at (See below for Reflow Temp VDC at 85°C µF KEMET/EIA Maximum/ 120 Hz 100 kHz +25°C +85°C +125°C °C part options) ≤ 260 °C 5 Minutes Maximum Maximum 100 kHz 100 kHz 100 kHz Maximum Rated Rated Case Code/ KEMET Part DC Maximum Allowable DF ESR Operating MSL Voltage Cap Case Size Number Leakage Ripple Current (rms) Temp (1) To complete KEMET part number, insert M for ±20% or K for ±10%. Designates Capacitance Tolerance. (2) To complete KEMET part number, insert T = 100% Matte Tin (Sn)-plated, G = Gold-plated, H = Standard solder coated (SnPb 5% Pb minimum), N = Non-magnetic 100% Tin (Sn), M = Non-magnetic (SnPb). Designates Termination Finish. Refer to Ordering Information for additional details. Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitution will be marked with the higher voltage rating. Substitutions can include better than series. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2005_T491 • 12/12/2019 55 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

Tantalum Surface Mount Capacitors – Standard Tantalum T491 Industrial Grade MnO 2 Table 1 – Ratings & Part Number Reference cont. Case Maximum Rated Rated KEMET Part DC Maximum Allowable Code/ DF ESR Operating MSL Voltage Cap Number Leakage Ripple Current (rms) Case Size Temp µA at +20°C % at +20°C Ω at +20°C mA at mA at mA at (See below for Reflow Temp VDC at 85°C µF KEMET/EIA Maximum/ 120 Hz 100 kHz +25°C +85°C +125°C °C part options) ≤ 260 °C 5 Minutes Maximum Maximum 100 kHz 100 kHz 100 kHz 4 220 B/3528-21 T491B227(1)004A(2) 8.8 18.0 0.5 412 371 165 125 1 4 220 C/6032-28 T491C227(1)004AT 8.8 15.0 1.2 303 273 121 125 1 4 220 D/7343-31 T491D227(1)004AT 8.8 8.0 0.8 433 390 173 125 1 4 220 W/7343-15 T491W227(1)004AT 8.8 8.0 0.8 474 427 190 125 1 4 330 D/7343-31 T491D337(1)004A(2) 13.2 8.0 0.7 463 417 185 125 1 4 330 V/7343-20 T491V337(1)004A(2) 13.2 12.0 0.7 423 381 169 125 1 4 330 C/6032-28 T491C337(1)004A(2) 13.2 10.0 0.9 350 315 140 125 1 4 330 X/7343-43 T491X337(1)004AT 13.2 8.0 0.8 454 409 182 125 1 4 470 X/7343-43 T491X477(1)004A(2) 18.8 8.0 0.5 574 517 230 125 1 4 470 D/7343-31 T491D477(1)004A(2) 18.8 8.0 0.8 433 390 173 125 1 4 680 X/7343-43 T491X687(1)004A(2) 27.2 12.0 0.5 574 517 230 125 1 4 680 D/7343-31 T491D687(1)004A(2) 27.2 12.0 0.5 548 493 219 125 1 4 1000 X/7343-43 T491X108(1)004A(2) 40.0 12.0 0.5 574 517 230 125 1 4 1000 E/7360-38 T491E108(M)004A(2) 40.0 15.0 0.2 1000 900 400 125 1 6.3 2.2 A/3216-18 T491A225(1)006A(2) 0.5 6.0 8.0 97 87 39 125 1 6.3 3.3 A/3216-18 T491A335(1)006A(2) 0.5 6.0 7.0 97 87 39 125 1 6.3 4.7 A/3216-18 T491A475(1)006A(2) 0.5 6.0 5.5 112 101 45 125 1 6.3 4.7 S/3216-12 T491S475(1)006A(2) 0.5 6.0 15.0 63 57 25 125 1 6.3 6.8 B/3528-21 T491B685(1)006A(2) 0.5 6.0 3.5 156 140 62 125 1 6.3 6.8 A/3216-18 T491A685(1)006A(2) 0.5 6.0 6.0 112 101 45 125 1 6.3 6.8 S/3216-12 T491S685(1)006A(2) 0.5 6.0 15.0 63 57 25 125 1 6.3 10 B/3528-21 T491B106(1)006A(2) 0.6 6.0 3.5 156 140 62 125 1 6.3 10 A/3216-18 T491A106(1)006A(2) 0.6 6.0 4.0 137 123 55 125 1 6.3 10 T/3528-12 T491T106(1)006A(2) 0.6 6.0 5.0 118 106 47 125 1 6.3 10 S/3216-12 T491S106(1)006A(2) 0.6 10.0 15.0 63 57 25 125 1 6.3 15 C/6032-28 T491C156(1)006A(2) 0.9 6.0 1.8 247 222 99 125 1 6.3 15 B/3528-21 T491B156(1)006A(2) 0.9 6.0 3.0 168 151 67 125 1 6.3 15 A/3216-18 T491A156(1)006A(2) 0.9 6.0 3.5 146 131 58 125 1 6.3 15 T/3528-12 T491T156(1)006A(2) 0.9 6.0 3.5 141 127 56 125 1 6.3 15 S/3216-12 T491S156(1)006A(2) 0.9 15.0 10.0 77 69 31 125 1 6.3 22 C/6032-28 T491C226(1)006A(2) 1.4 6.0 1.8 247 222 99 125 1 6.3 22 U/6032-15 T491U226(1)006A(2) 1.4 6.0 1.8 224 202 90 125 1 6.3 22 B/3528-21 T491B226(1)006A(2) 1.4 6.0 2.0 206 185 82 125 1 6.3 22 A/3216-18 T491A226(1)006A(2) 1.4 6.0 3.0 158 142 63 125 1 6.3 22 T/3528-12 T491T226(1)006A(2) 1.4 8.0 5.0 118 106 47 125 1 6.3 33 C/6032-28 T491C336(1)006A(2) 2.1 6.0 1.6 247 222 99 125 1 6.3 33 U/6032-15 T491U336(1)006A(2) 2.1 6.0 1.8 224 202 90 125 1 6.3 33 B/3528-21 T491B336(1)006A(2) 2.1 6.0 2.2 168 151 67 125 1 6.3 33 A/3216-18 T491A336(1)006A(2) 2.1 12.0 2.5 173 156 69 125 1 6.3 33 T/3528-12 T491T336(1)006A(2) 2.1 12.0 6.0 108 97 43 125 1 6.3 47 D/7343-31 T491D476(1)006A(2) 3.0 6.0 0.8 433 390 173 125 1 6.3 47 C/6032-28 T491C476(1)006A(2) 3.0 6.0 1.5 262 236 105 125 1 6.3 47 U/6032-15 T491U476(1)006A(2) 3.0 6.0 1.8 224 202 90 125 1 6.3 47 V/7343-20 T491V476(1)006AT 3.0 6.0 0.7 423 381 169 125 1 6.3 47 B/3528-21 T491B476(1)006A(2) 3.0 6.0 2.0 206 185 82 125 1 6.3 47 A/3216-18 T491A476(1)006A(2) 3.0 12.0 3.5 146 131 58 125 1 µA at +20°C % at +20°C Ω at +20°C mA at mA at mA at (See below for Reflow Temp VDC at 85°C µF KEMET/EIA Maximum/ 120 Hz 100 kHz +25°C +85°C +125°C °C part options) ≤ 260 °C 5 Minutes Maximum Maximum 100 kHz 100 kHz 100 kHz Maximum Rated Rated Case Code/ KEMET Part DC Maximum Allowable DF ESR Operating MSL Voltage Cap Case Size Number Leakage Ripple Current (rms) Temp (1) To complete KEMET part number, insert M for ±20% or K for ±10%. Designates Capacitance Tolerance. (2) To complete KEMET part number, insert T = 100% Matte Tin (Sn)-plated, G = Gold-plated, H = Standard solder coated (SnPb 5% Pb minimum), N = Non-magnetic 100% Tin (Sn), M = Non-magnetic (SnPb). Designates Termination Finish. Refer to Ordering Information for additional details. Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitution will be marked with the higher voltage rating. Substitutions can include better than series. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2005_T491 • 12/12/2019 66 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

Tantalum Surface Mount Capacitors – Standard Tantalum T491 Industrial Grade MnO 2 Table 1 – Ratings & Part Number Reference cont. Case Maximum Rated Rated KEMET Part DC Maximum Allowable Code/ DF ESR Operating MSL Voltage Cap Number Leakage Ripple Current (rms) Case Size Temp µA at +20°C % at +20°C Ω at +20°C mA at mA at mA at (See below for Reflow Temp VDC at 85°C µF KEMET/EIA Maximum/ 120 Hz 100 kHz +25°C +85°C +125°C °C part options) ≤ 260 °C 5 Minutes Maximum Maximum 100 kHz 100 kHz 100 kHz 6.3 47 T/3528-12 T491T476(1)006A(2) 3.0 10.0 2.0 187 168 75 125 1 6.3 68 D/7343-31 T491D686(1)006A(2) 4.3 6.0 0.8 433 390 173 125 1 6.3 68 C/6032-28 T491C686(1)006A(2) 4.3 6.0 1.2 303 273 121 125 1 6.3 68 U/6032-15 T491U686(1)006A(2) 4.3 10.0 1.8 224 202 90 125 1 6.3 68 V/7343-20 T491V686(1)006AT 4.3 6.0 0.7 423 381 169 125 1 6.3 68 B/3528-21 T491B686(1)006A(2) 4.3 8.0 0.9 307 276 123 125 1 6.3 68 A/3216-18 T491A686(1)006A(2) 4.3 30.0 4.0 137 123 55 125 1 6.3 100 D/7343-31 T491D107(1)006A(2) 6.3 8.0 0.8 433 390 173 125 1 6.3 100 V/7343-20 T491V107(1)006A(2) 6.3 8.0 0.7 423 381 169 125 1 6.3 100 C/6032-28 T491C107(1)006A(2) 6.3 8.0 0.9 350 315 140 125 1 6.3 100 U/6032-15 T491U107(1)006A(2) 6.3 10.0 1.8 224 202 90 125 1 6.3 100 B/3528-21 T491B107(1)006A(2) 6.3 12.0 2.0 206 185 82 125 1 6.3 100 M/3528-15 T491M107(1)006A(2) 6.3 20.0 3.0 200 180 80 125 1 6.3 150 B/3528-21 T491B157(1)006A(2) 9.5 15.0 3.0 168 151 67 125 1 6.3 150 D/7343-31 T491D157(1)006A(2) 9.5 8.0 0.7 463 417 185 125 1 6.3 150 C/6032-28 T491C157(1)006A(2) 9.5 8.0 1.2 303 273 121 125 1 6.3 150 V/7343-20 T491V157(1)006A(2) 9.5 8.0 0.7 423 381 169 125 1 6.3 150 U/6032-15 T491U157(1)006AT 9.5 8.0 0.6 387 348 155 125 1 6.3 150 W/7343-15 T491W157(1)006AT 9.5 8.0 0.8 474 427 190 125 1 6.3 150 X/7343-43 T491X157(1)006A(2) 9.5 8.0 0.7 486 437 194 125 1 6.3 220 X/7343-43 T491X227(1)006A(2) 13.9 8.0 0.7 486 437 194 125 1 6.3 220 D/7343-31 T491D227(1)006A(2) 13.9 8.0 0.7 463 417 185 125 1 6.3 220 C/6032-28 T491C227(1)006A(2) 13.9 10.0 1.0 332 299 133 125 1 6.3 220 V/7343-20 T491V227(1)006A(2) 13.9 8.0 0.7 423 381 169 125 1 6.3 220 W/7343-15 T491W227(1)006AT 13.9 8.0 0.8 474 427 190 125 1 6.3 330 C/6032-28 T491C337(1)006A(2) 20.8 12.0 1.2 303 273 121 125 1 6.3 330 V/7343-20 T491V337(1)006AT 20.8 8.0 0.7 423 381 169 125 1 6.3 330 X/7343-43 T491X337(1)006A(2) 20.8 8.0 0.4 642 578 257 125 1 6.3 330 D/7343-31 T491D337(1)006A(2) 20.8 8.0 0.4 612 551 245 125 1 6.3 330 E/7360-38 T491E337(1)006A(2) 20.8 8.0 0.5 632 569 253 125 1 6.3 470 X/7343-43 T491X477(1)006A(2) 29.6 8.0 0.4 642 578 257 125 1 6.3 470 D/7343-31 T491D477(1)006A(2) 29.6 12.0 0.4 612 551 245 125 1 6.3 470 V/7343-20 T491V477(1)006A(2) 29.6 15.0 0.7 423 381 169 125 1 6.3 470 E/7360-38 T491E477(1)006A(2) 29.6 10.0 0.4 707 636 283 125 1 6.3 680 X/7343-43 T491X687(1)006A(2) 42.8 15.0 0.6 524 472 210 125 1 6.3 680 E/7360-38 T491E687(M)006A(2) 42.8 12.0 0.5 632 569 253 125 1 6.3 1000 X/7343-43 T491X108(1)006AT 63.0 15.0 0.6 524 472 210 125 1 10 1 A/3216-18 T491A105(1)010A(2) 0.5 4.0 10.0 87 78 35 125 1 10 1.5 A/3216-18 T491A155(1)010A(2) 0.5 6.0 8.0 97 87 39 125 1 10 2.2 B/3528-21 T491B225(1)010A(2) 0.5 6.0 3.5 156 140 62 125 1 10 2.2 A/3216-18 T491A225(1)010A(2) 0.5 6.0 7.0 97 87 39 125 1 10 3.3 A/3216-18 T491A335(1)010A(2) 0.5 6.0 5.5 117 105 47 125 1 10 3.3 S/3216-12 T491S335(1)010A(2) 0.5 6.0 15.0 63 57 25 125 1 10 4.7 B/3528-21 T491B475(1)010A(2) 0.5 6.0 3.5 156 140 62 125 1 10 4.7 A/3216-18 T491A475(1)010A(2) 0.5 6.0 4.0 137 123 55 125 1 10 4.7 S/3216-12 T491S475(1)010A(2) 0.5 6.0 15.0 63 57 25 125 1 µA at +20°C % at +20°C Ω at +20°C mA at mA at mA at (See below for Reflow Temp VDC at 85°C µF KEMET/EIA Maximum/ 120 Hz 100 kHz +25°C +85°C +125°C °C part options) ≤ 260 °C 5 Minutes Maximum Maximum 100 kHz 100 kHz 100 kHz Maximum Rated Rated Case Code/ KEMET Part DC Maximum Allowable DF ESR Operating MSL Voltage Cap Case Size Number Leakage Ripple Current (rms) Temp (1) To complete KEMET part number, insert M for ±20% or K for ±10%. Designates Capacitance Tolerance. (2) To complete KEMET part number, insert T = 100% Matte Tin (Sn)-plated, G = Gold-plated, H = Standard solder coated (SnPb 5% Pb minimum), N = Non-magnetic 100% Tin (Sn), M = Non-magnetic (SnPb). Designates Termination Finish. Refer to Ordering Information for additional details. Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitution will be marked with the higher voltage rating. Substitutions can include better than series. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2005_T491 • 12/12/2019 77 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

Tantalum Surface Mount Capacitors – Standard Tantalum T491 Industrial Grade MnO 2 Table 1 – Ratings & Part Number Reference cont. Case Maximum Rated Rated KEMET Part DC Maximum Allowable Code/ DF ESR Operating MSL Voltage Cap Number Leakage Ripple Current (rms) Case Size Temp µA at +20°C % at +20°C Ω at +20°C mA at mA at mA at (See below for Reflow Temp VDC at 85°C µF KEMET/EIA Maximum/ 120 Hz 100 kHz +25°C +85°C +125°C °C part options) ≤ 260 °C 5 Minutes Maximum Maximum 100 kHz 100 kHz 100 kHz 10 6.8 B/3528-21 T491B685(1)010A(2) 0.7 6.0 3.5 156 140 62 125 1 10 6.8 A/3216-18 T491A685(1)010A(2) 0.7 6.0 4.0 137 123 55 125 1 10 6.8 T/3528-12 T491T685(1)010A(2) 0.7 6.0 5.0 118 106 47 125 1 10 6.8 S/3216-12 T491S685(1)010A(2) 0.7 10.0 15.0 63 57 25 125 1 10 10 C/6032-28 T491C106(1)010A(2) 1.0 6.0 1.8 247 222 99 125 1 10 10 B/3528-21 T491B106(1)010A(2) 1.0 6.0 3.0 156 140 62 125 1 10 10 A/3216-18 T491A106(1)010A(2) 1.0 6.0 3.8 137 123 55 125 1 10 10 T/3528-12 T491T106(1)010A(2) 1.0 6.0 3.0 153 138 61 125 1 10 10 S/3216-12 T491S106(1)010A(2) 1.0 10.0 15.0 63 57 25 125 1 10 15 C/6032-28 T491C156(1)010A(2) 1.5 6.0 1.8 247 222 99 125 1 10 15 U/6032-15 T491U156(1)010A(2) 1.5 6.0 1.8 224 202 90 125 1 10 15 B/3528-21 T491B156(1)010A(2) 1.5 6.0 2.0 206 185 82 125 1 10 15 A/3216-18 T491A156(1)010A(2) 1.5 8.0 6.0 112 101 45 125 1 10 15 T/3528-12 T491T156(1)010A(2) 1.5 6.0 2.8 158 142 63 125 1 10 22 D/7343-31 T491D226(1)010A(2) 2.2 6.0 0.8 433 390 173 125 1 10 22 C/6032-28 T491C226(1)010A(2) 2.2 6.0 1.6 247 222 99 125 1 10 22 U/6032-15 T491U226(1)010A(2) 2.2 6.0 1.8 224 202 90 125 1 10 22 B/3528-21 T491B226(1)010A(2) 2.2 6.0 2.0 206 185 82 125 1 10 22 A/3216-18 T491A226(1)010A(2) 2.2 8.0 3.2 112 101 45 125 1 10 22 T/3528-12 T491T226(1)010A(2) 2.2 12.0 8.0 94 85 38 125 1 10 33 D/7343-31 T491D336(1)010A(2) 3.3 6.0 0.8 433 390 173 125 1 10 33 V/7343-20 T491V336(1)010A(2) 3.3 6.0 0.7 423 381 169 125 1 10 33 C/6032-28 T491C336(1)010A(2) 3.3 6.0 1.5 271 244 108 125 1 10 33 U/6032-15 T491U336(1)010A(2) 3.3 6.0 1.8 224 202 90 125 1 10 33 B/3528-21 T491B336(1)010A(2) 3.3 6.0 1.8 217 195 87 125 1 10 33 T/3528-12 T491T336(1)010A(2) 3.3 24.0 5.0 118 106 47 125 1 10 33 A/3216-18 T491A336(1)010A(2) 3.3 15.0 6.0 112 101 45 125 1 10 47 D/7343-31 T491D476(1)010A(2) 4.7 6.0 0.8 433 390 173 125 1 10 47 V/7343-20 T491V476(1)010A(2) 4.7 6.0 0.7 423 381 169 125 1 10 47 C/6032-28 T491C476(1)010A(2) 4.7 6.0 1.2 303 273 121 125 1 10 47 U/6032-15 T491U476(1)010A(2) 4.7 6.0 1.4 254 229 102 125 1 10 47 B/3528-21 T491B476(1)010A(2) 4.7 8.0 1.0 292 263 117 125 1 10 68 D/7343-31 T491D686(1)010A(2) 6.8 6.0 0.8 433 390 173 125 1 10 68 V/7343-20 T491V686(1)010A(2) 6.8 6.0 0.7 423 381 169 125 1 10 68 C/6032-28 T491C686(1)010A(2) 6.8 6.0 1.0 332 299 133 125 1 10 68 W/7343-15 T491W686(1)010AT 6.8 6.0 1.2 387 348 155 125 1 10 68 U/6032-15 T491U686(1)010A(2) 6.8 10.0 1.8 224 202 90 125 1 10 68 B/3528-21 T491B686(1)010A(2) 6.8 8.0 1.0 292 263 117 125 1 10 100 B/3528-21 T491B107(1)010A(2) 10.0 15.0 1.2 266 239 106 125 1 10 100 D/7343-31 T491D107(1)010A(2) 10.0 8.0 0.7 463 417 185 125 1 10 100 U/6032-15 T491U107(1)010AT 10.0 8.0 0.7 359 323 144 125 1 10 100 W/7343-15 T491W107(1)010AT 10.0 8.0 0.8 474 427 190 125 1 10 100 C/6032-28 T491C107(1)010A(2) 10.0 8.0 1.0 332 299 133 125 1 10 100 V/7343-20 T491V107(1)010A(2) 10.0 8.0 0.7 423 381 169 125 1 10 150 X/7343-43 T491X157(1)010A(2) 15.0 8.0 0.7 486 437 194 125 1 10 150 D/7343-31 T491D157(1)010A(2) 15.0 8.0 0.7 463 417 185 125 1 µA at +20°C % at +20°C Ω at +20°C mA at mA at mA at (See below for Reflow Temp VDC at 85°C µF KEMET/EIA Maximum/ 120 Hz 100 kHz +25°C +85°C +125°C °C part options) ≤ 260 °C 5 Minutes Maximum Maximum 100 kHz 100 kHz 100 kHz Maximum Rated Rated Case Code/ KEMET Part DC Maximum Allowable DF ESR Operating MSL Voltage Cap Case Size Number Leakage Ripple Current (rms) Temp (1) To complete KEMET part number, insert M for ±20% or K for ±10%. Designates Capacitance Tolerance. (2) To complete KEMET part number, insert T = 100% Matte Tin (Sn)-plated, G = Gold-plated, H = Standard solder coated (SnPb 5% Pb minimum), N = Non-magnetic 100% Tin (Sn), M = Non-magnetic (SnPb). Designates Termination Finish. Refer to Ordering Information for additional details. Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitution will be marked with the higher voltage rating. Substitutions can include better than series. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2005_T491 • 12/12/2019 88 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

Tantalum Surface Mount Capacitors – Standard Tantalum T491 Industrial Grade MnO 2 Table 1 – Ratings & Part Number Reference cont. Case Maximum Rated Rated KEMET Part DC Maximum Allowable Code/ DF ESR Operating MSL Voltage Cap Number Leakage Ripple Current (rms) Case Size Temp µA at +20°C % at +20°C Ω at +20°C mA at mA at mA at (See below for Reflow Temp VDC at 85°C µF KEMET/EIA Maximum/ 120 Hz 100 kHz +25°C +85°C +125°C °C part options) ≤ 260 °C 5 Minutes Maximum Maximum 100 kHz 100 kHz 100 kHz 10 150 C/6032-28 T491C157(1)010A(2) 15.0 10.0 0.9 350 315 140 125 1 10 150 V/7343-20 T491V157(1)010A(2) 15.0 8.0 0.7 423 381 169 125 1 10 220 C/6032-28 T491C227(1)010A(2) 22.0 10.0 0.9 350 315 140 125 1 10 220 X/7343-43 T491X227(1)010A(2) 22.0 8.0 0.5 574 517 230 125 1 10 220 D/7343-31 T491D227(1)010A(2) 22.0 8.0 0.5 548 493 219 125 1 10 220 V/7343-20 T491V227(1)010A(2) 22.0 8.0 0.7 423 381 169 125 1 10 330 D/7343-31 T491D337(1)010A(2) 33.0 10.0 0.5 548 493 219 125 1 10 330 V/7343-20 T491V337(1)010A(2) 33.0 12.0 0.7 423 381 169 125 1 10 330 X/7343-43 T491X337(1)010A(2) 33.0 10.0 0.5 574 517 230 125 1 10 330 E/7360-38 T491E337(1)010A(2) 33.0 10.0 0.5 632 569 253 125 1 10 470 X/7343-43 T491X477(1)010A(2) 47 10 0.2 908 817.2 363.2 125 1 10 470 E/7360-38 T491E477(1)010A(2) 47.0 12.0 0.5 632 569 253 125 1 16 1 A/3216-18 T491A105(1)016A(2) 0.5 4.0 10.0 87 78 35 125 1 16 1.5 A/3216-18 T491A155(1)016A(2) 0.5 6.0 8.0 97 87 39 125 1 16 2.2 A/3216-18 T491A225(1)016A(2) 0.5 6.0 6.0 112 101 45 125 1 16 2.2 S/3216-12 T491S225(1)016A(2) 0.5 6.0 15.0 63 57 25 125 1 16 2.2 B/3528-21 T491B225(1)016A(2) 0.5 6.0 3.5 156 140 62 125 1 16 3.3 B/3528-21 T491B335(1)016A(2) 0.5 6.0 3.5 156 140 62 125 1 16 3.3 A/3216-18 T491A335(1)016A(2) 0.5 6.0 5.0 122 110 49 125 1 16 4.7 C/6032-28 T491C475(1)016A(2) 0.8 6.0 2.4 214 193 86 125 1 16 4.7 B/3528-21 T491B475(1)016A(2) 0.8 6.0 3.5 156 140 62 125 1 16 4.7 A/3216-18 T491A475(1)016A(2) 0.8 6.0 4.0 137 123 55 125 1 16 4.7 T/3528-12 T491T475(1)016A(2) 0.8 6.0 5.0 118 106 47 125 1 16 6.8 C/6032-28 T491C685(1)016A(2) 1.1 6.0 1.9 241 217 96 125 1 16 6.8 B/3528-21 T491B685(1)016A(2) 1.1 6.0 2.5 184 166 74 125 1 16 6.8 A/3216-18 T491A685(1)016A(2) 1.1 6.0 3.5 146 131 58 125 1 16 10 C/6032-28 T491C106(1)016A(2) 1.6 6.0 1.8 247 222 99 125 1 16 10 U/6032-15 T491U106(1)016A(2) 1.6 6.0 1.8 224 202 90 125 1 16 10 B/3528-21 T491B106(1)016A(2) 1.6 6.0 2.0 206 185 82 125 1 16 10 A/3216-18 T491A106(1)016A(2) 1.6 6.0 3.0 158 142 63 125 1 16 10 T/3528-12 T491T106(1)016A(2) 1.6 8.0 8.0 94 85 38 125 1 16 15 D/7343-31 T491D156(1)016A(2) 2.4 6.0 1.0 387 348 155 125 1 16 15 C/6032-28 T491C156(1)016A(2) 2.4 6.0 1.6 247 222 99 125 1 16 15 U/6032-15 T491U156(1)016A(2) 2.4 6.0 1.8 224 202 90 125 1 16 15 B/3528-21 T491B156(1)016A(2) 2.4 6.0 2.0 192 173 77 125 1 16 15 A/3216-18 T491A156(1)016A(2) 2.4 8.0 3.5 146 131 58 125 1 16 22 D/7343-31 T491D226(1)016A(2) 3.5 6.0 0.8 433 390 173 125 1 16 22 C/6032-28 T491C226(1)016A(2) 3.5 6.0 1.5 262 236 105 125 1 16 22 U/6032-15 T491U226(1)016A(2) 3.5 10.0 3.0 173 156 69 125 1 16 22 B/3528-21 T491B226(1)016A(2) 3.5 6.0 2.2 197 177 79 125 1 16 33 D/7343-31 T491D336(1)016A(2) 5.3 6.0 0.8 433 390 173 125 1 16 33 C/6032-28 T491C336(1)016A(2) 5.3 6.0 1.2 303 273 121 125 1 16 33 U/6032-15 T491U336(1)016A(2) 5.3 6.0 1.0 300 270 120 125 1 16 33 B/3528-21 T491B336(1)016A(2) 5.3 8.0 2.0 206 185 82 125 1 16 47 D/7343-31 T491D476(1)016A(2) 7.5 6.0 0.8 433 390 173 125 1 16 47 V/7343-20 T491V476(1)016A(2) 7.5 6.0 0.7 423 381 169 125 1 µA at +20°C % at +20°C Ω at +20°C mA at mA at mA at (See below for Reflow Temp VDC at 85°C µF KEMET/EIA Maximum/ 120 Hz 100 kHz +25°C +85°C +125°C °C part options) ≤ 260 °C 5 Minutes Maximum Maximum 100 kHz 100 kHz 100 kHz Maximum Rated Rated Case Code/ KEMET Part DC Maximum Allowable DF ESR Operating MSL Voltage Cap Case Size Number Leakage Ripple Current (rms) Temp (1) To complete KEMET part number, insert M for ±20% or K for ±10%. Designates Capacitance Tolerance. (2) To complete KEMET part number, insert T = 100% Matte Tin (Sn)-plated, G = Gold-plated, H = Standard solder coated (SnPb 5% Pb minimum), N = Non-magnetic 100% Tin (Sn), M = Non-magnetic (SnPb). Designates Termination Finish. Refer to Ordering Information for additional details. Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitution will be marked with the higher voltage rating. Substitutions can include better than series. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2005_T491 • 12/12/2019 99 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

Tantalum Surface Mount Capacitors – Standard Tantalum T491 Industrial Grade MnO 2 Table 1 – Ratings & Part Number Reference cont. Case Maximum Rated Rated KEMET Part DC Maximum Allowable Code/ DF ESR Operating MSL Voltage Cap Number Leakage Ripple Current (rms) Case Size Temp µA at +20°C % at +20°C Ω at +20°C mA at mA at mA at (See below for Reflow Temp VDC at 85°C µF KEMET/EIA Maximum/ 120 Hz 100 kHz +25°C +85°C +125°C °C part options) ≤ 260 °C 5 Minutes Maximum Maximum 100 kHz 100 kHz 100 kHz 16 47 C/6032-28 T491C476(1)016A(2) 7.5 6.0 1.0 332 299 133 125 1 16 68 V/7343-20 T491V686(1)016A(2) 10.9 6.0 0.7 423 381 169 125 1 16 68 C/6032-28 T491C686(1)016A(2) 10.9 6.0 1.0 303 273 121 125 1 16 68 W/7343-15 T491W686(1)016AT 10.9 6.0 0.8 474 427 190 125 1 16 68 D/7343-31 T491D686(1)016A(2) 10.9 6.0 0.7 463 417 185 125 1 16 100 X/7343-43 T491X107(1)016A(2) 16.0 8.0 0.7 486 437 194 125 1 16 100 C/6032-28 T491C107(1)016AT 16.0 10.0 1.0 332 299 133 125 1 16 100 V/7343-20 T491V107(1)016A(2) 16.0 8.0 0.7 423 381 169 125 1 16 100 D/7343-31 T491D107(1)016A(2) 16.0 8.0 0.7 463 417 185 125 1 16 150 X/7343-43 T491X157(1)016A(2) 24.0 8.0 0.5 574 517 230 125 1 16 150 D/7343-31 T491D157(1)016A(2) 24.0 10.0 0.7 463 417 185 125 1 16 220 D/7343-31 T491D227(1)016A(2) 35.2 15.0 0.9 408 367 163 125 1 16 220 X/7343-43 T491X227(1)016A(2) 35.2 10.0 0.5 574 517 230 125 1 16 220 E/7360-38 T491E227(1)016A(2) 35.2 7.2 0.9 471 424 188 125 1 20 0.68 A/3216-18 T491A684(1)020A(2) 0.5 4.0 12.0 79 71 32 125 1 20 0.47 A/3216-18 T491A474(1)020A(2) 0.5 4.0 14.0 73 66 29 125 1 20 1 A/3216-18 T491A105(1)020A(2) 0.5 4.0 9.0 91 82 36 125 1 20 1 S/3216-12 T491S105(1)020A(2) 0.5 6.0 18.0 58 52 23 125 1 20 1.5 A/3216-18 T491A155(1)020A(2) 0.5 6.0 6.5 107 96 43 125 1 20 1.5 S/3216-12 T491S155(1)020A(2) 0.5 6.0 15.0 63 57 25 125 1 20 2.2 B/3528-21 T491B225(1)020A(2) 0.5 6.0 3.5 156 140 62 125 1 20 2.2 A/3216-18 T491A225(1)020A(2) 0.5 6.0 6.0 104 94 42 125 1 20 3.3 B/3528-21 T491B335(1)020A(2) 0.7 6.0 3.0 168 151 67 125 1 20 3.3 A/3216-18 T491A335(1)020A(2) 0.7 6.0 4.0 129 116 52 125 1 20 3.3 T/3528-12 T491T335(1)020A(2) 0.7 6.0 5.0 118 106 47 125 1 20 4.7 C/6032-28 T491C475(1)020A(2) 0.9 6.0 2.4 214 193 86 125 1 20 4.7 B/3528-21 T491B475(1)020A(2) 0.9 6.0 3.0 168 151 67 125 1 20 4.7 A/3216-18 T491A475(1)020A(2) 0.9 6.0 4.0 137 123 55 125 1 20 6.8 C/6032-28 T491C685(1)020A(2) 1.4 6.0 1.9 241 217 96 125 1 20 6.8 U/6032-15 T491U685(1)020A(2) 1.4 6.0 1.9 218 196 87 125 1 20 6.8 B/3528-21 T491B685(1)020A(2) 1.4 6.0 2.0 206 185 82 125 1 20 6.8 A/3216-18 T491A685(1)020A(2) 1.4 8.0 6.0 112 101 45 125 1 20 10 C/6032-28 T491C106(1)020A(2) 2.0 6.0 1.6 247 222 99 125 1 20 10 U/6032-15 T491U106(1)020A(2) 2.0 6.0 1.8 224 202 90 125 1 20 10 B/3528-21 T491B106(1)020A(2) 2.0 6.0 2.0 201 181 80 125 1 20 10 A/3216-18 T491A106(1)020A(2) 2.0 10.0 5.0 122 110 49 125 1 20 15 D/7343-31 T491D156(1)020A(2) 3.0 6.0 1.0 387 348 155 125 1 20 15 B/3528-21 T491B156(1)020AT 3.0 6.0 2.0 206 185 82 125 1 20 15 C/6032-28 T491C156(1)020A(2) 3.0 6.0 1.7 254 229 102 125 1 20 22 D/7343-31 T491D226(1)020A(2) 4.4 6.0 0.8 433 390 173 125 1 20 22 V/7343-20 T491V226(1)020A(2) 4.4 6.0 0.7 423 381 169 125 1 20 22 C/6032-28 T491C226(1)020A(2) 4.4 6.0 1.2 303 273 121 125 1 20 22 B/3528-21 T491B226(1)020A(2) 4.4 8.0 4.0 146 131 58 125 1 20 33 D/7343-31 T491D336(1)020A(2) 6.6 6.0 0.8 433 390 173 125 1 20 33 C/6032-28 T491C336(1)020A(2) 6.6 6.0 1.2 303 273 121 125 1 20 33 V/7343-20 T491V336(1)020A(2) 6.6 8.0 0.7 423 381 169 125 1 µA at +20°C % at +20°C Ω at +20°C mA at mA at mA at (See below for Reflow Temp VDC at 85°C µF KEMET/EIA Maximum/ 120 Hz 100 kHz +25°C +85°C +125°C °C part options) ≤ 260 °C 5 Minutes Maximum Maximum 100 kHz 100 kHz 100 kHz Maximum Rated Rated Case Code/ KEMET Part DC Maximum Allowable DF ESR Operating MSL Voltage Cap Case Size Number Leakage Ripple Current (rms) Temp (1) To complete KEMET part number, insert M for ±20% or K for ±10%. Designates Capacitance Tolerance. (2) To complete KEMET part number, insert T = 100% Matte Tin (Sn)-plated, G = Gold-plated, H = Standard solder coated (SnPb 5% Pb minimum), N = Non-magnetic 100% Tin (Sn), M = Non-magnetic (SnPb). Designates Termination Finish. Refer to Ordering Information for additional details. Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitution will be marked with the higher voltage rating. Substitutions can include better than series. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2005_T491 • 12/12/2019 1100 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

Tantalum Surface Mount Capacitors – Standard Tantalum T491 Industrial Grade MnO 2 Table 1 – Ratings & Part Number Reference cont. Case Maximum Rated Rated KEMET Part DC Maximum Allowable Code/ DF ESR Operating MSL Voltage Cap Number Leakage Ripple Current (rms) Case Size Temp µA at +20°C % at +20°C Ω at +20°C mA at mA at mA at (See below for Reflow Temp VDC at 85°C µF KEMET/EIA Maximum/ 120 Hz 100 kHz +25°C +85°C +125°C °C part options) ≤ 260 °C 5 Minutes Maximum Maximum 100 kHz 100 kHz 100 kHz 20 33 B/3528-21 T491B336(M)020A(2) 6.6 10.0 4.0 146 131 58 125 1 20 47 C/6032-28 T491C476(1)020A(2) 9.4 6.0 0.9 350 315 140 125 1 20 47 X/7343-43 T491X476(1)020AT 9.4 6.0 0.8 454 409 182 125 1 20 47 D/7343-31 T491D476(1)020A(2) 9.4 6.0 0.7 463 417 185 125 1 20 68 X/7343-43 T491X686(1)020A(2) 13.6 6.0 0.7 486 437 194 125 1 20 68 D/7343-31 T491D686(1)020A(2) 13.6 6.0 0.7 463 417 185 125 1 20 68 C/6032-28 T491C686(1)020A(2) 13.6 8.0 0.5 469 422 188 125 1 20 100 X/7343-43 T491X107(1)020A(2) 20.0 8.0 0.5 574 517 230 125 1 20 100 D/7343-31 T491D107(1)020AT 20.0 8.0 0.9 408 367 163 125 1 20 100 E/7360-38 T491E107(1)020A(2) 20.0 8.0 0.5 632 569 253 125 1 20 150 X/7343-43 T491X157(1)020A(2) 30.0 10.0 0.4 642 578 257 125 1 25 0.33 A/3216-18 T491A334(1)025A(2) 0.5 4.0 15.0 71 64 28 125 1 25 0.47 A/3216-18 T491A474(1)025A(2) 0.5 4.0 13.0 76 68 30 125 1 25 0.68 A/3216-18 T491A684(1)025A(2) 0.5 4.0 10.0 87 78 35 125 1 25 1 B/3528-21 T491B105(1)025A(2) 0.5 4.0 5.0 130 117 52 125 1 25 1 A/3216-18 T491A105(1)025A(2) 0.5 4.0 8.0 97 87 39 125 1 25 1 S/3216-12 T491S105(1)025A(2) 0.5 6.0 18.0 58 52 23 125 1 25 1.5 B/3528-21 T491B155(1)025A(2) 0.5 6.0 5.0 130 117 52 125 1 25 1.5 A/3216-18 T491A155(1)025A(2) 0.5 6.0 7.0 104 94 42 125 1 25 2.2 C/6032-28 T491C225(1)025A(2) 0.6 6.0 3.5 177 159 71 125 1 25 2.2 A/3216-18 T491A225(1)025A(2) 0.6 6.0 7.0 104 94 42 125 1 25 2.2 B/3528-21 T491B225(1)025A(2) 0.6 6.0 4.5 137 123 55 125 1 25 3.3 C/6032-28 T491C335(1)025A(2) 0.8 6.0 2.5 210 189 84 125 1 25 3.3 A/3216-18 T491A335(1)025A(2) 0.8 6.0 7.0 104 94 42 125 1 25 3.3 B/3528-21 T491B335(1)025A(2) 0.8 6.0 3.5 156 140 62 125 1 25 4.7 C/6032-28 T491C475(1)025A(2) 1.2 6.0 2.3 214 193 86 125 1 25 4.7 B/3528-21 T491B475(1)025A(2) 1.2 6.0 1.5 238 214 95 125 1 25 4.7 A/3216-18 T491A475(1)025A(2) 1.2 8.0 6.0 112 101 45 125 1 25 6.8 D/7343-31 T491D685(1)025A(2) 1.7 6.0 1.8 289 260 116 125 1 25 6.8 C/6032-28 T491C685(1)025A(2) 1.7 6.0 1.9 241 217 96 125 1 25 6.8 B/3528-21 T491B685(1)025A(2) 1.7 6.0 2.8 174 157 70 125 1 25 10 D/7343-31 T491D106(1)025A(2) 2.5 6.0 1.0 387 348 155 125 1 25 10 C/6032-28 T491C106(1)025A(2) 2.5 6.0 1.5 271 244 108 125 1 25 10 B/3528-21 T491B106(1)025A(2) 2.5 6.0 2.0 168 151 67 125 1 25 15 D/7343-31 T491D156(1)025A(2) 3.8 6.0 1.0 387 348 155 125 1 25 15 V/7343-20 T491V156(1)025AT 3.8 6.0 1.0 354 319 142 125 1 25 15 C/6032-28 T491C156(1)025A(2) 3.8 6.0 1.5 271 244 108 125 1 25 15 B/3528-21 T491B156(1)025A(2) 3.8 8.0 4.0 146 131 58 125 1 25 22 D/7343-31 T491D226(1)025A(2) 5.5 6.0 0.8 433 390 173 125 1 25 22 C/6032-28 T491C226(1)025A(2) 5.5 6.0 1.0 280 252 112 125 1 25 22 V/7343-20 T491V226(1)025A(2) 5.5 6.0 0.7 423 381 169 125 1 25 33 X/7343-43 T491X336(1)025A(2) 8.3 6.0 0.7 486 437 194 125 1 25 33 D/7343-31 T491D336(1)025A(2) 8.3 6.0 0.7 463 417 185 125 1 25 33 C/6032-28 T491C336(1)025A(2) 8.3 6.0 0.9 350 315 140 125 1 25 47 X/7343-43 T491X476(1)025A(2) 11.8 6.0 0.7 486 437 194 125 1 25 47 D/7343-31 T491D476(1)025A(2) 11.8 6.0 0.7 463 417 185 125 1 µA at +20°C % at +20°C Ω at +20°C mA at mA at mA at (See below for Reflow Temp VDC at 85°C µF KEMET/EIA Maximum/ 120 Hz 100 kHz +25°C +85°C +125°C °C part options) ≤ 260 °C 5 Minutes Maximum Maximum 100 kHz 100 kHz 100 kHz Maximum Rated Rated Case Code/ KEMET Part DC Maximum Allowable DF ESR Operating MSL Voltage Cap Case Size Number Leakage Ripple Current (rms) Temp (1) To complete KEMET part number, insert M for ±20% or K for ±10%. Designates Capacitance Tolerance. (2) To complete KEMET part number, insert T = 100% Matte Tin (Sn)-plated, G = Gold-plated, H = Standard solder coated (SnPb 5% Pb minimum), N = Non-magnetic 100% Tin (Sn), M = Non-magnetic (SnPb). Designates Termination Finish. Refer to Ordering Information for additional details. Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitution will be marked with the higher voltage rating. Substitutions can include better than series. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2005_T491 • 12/12/2019 1111 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

Tantalum Surface Mount Capacitors – Standard Tantalum T491 Industrial Grade MnO 2 Table 1 – Ratings & Part Number Reference cont. Case Maximum Rated Rated KEMET Part DC Maximum Allowable Code/ DF ESR Operating MSL Voltage Cap Number Leakage Ripple Current (rms) Case Size Temp µA at +20°C % at +20°C Ω at +20°C mA at mA at mA at (See below for Reflow Temp VDC at 85°C µF KEMET/EIA Maximum/ 120 Hz 100 kHz +25°C +85°C +125°C °C part options) ≤ 260 °C 5 Minutes Maximum Maximum 100 kHz 100 kHz 100 kHz 25 68 X/7343-43 T491X686(1)025A(2) 17.0 6.0 0.7 486 437 194 125 1 25 68 D/7343-31 T491D686(1)025A(2) 17.0 10.0 0.7 463 417 185 125 1 25 100 X/7343-43 T491X107(1)025A(2) 25.0 8.0 0.3 742 668 297 125 1 25 100 E/7360-38 T491E107(1)025A(2) 25.0 8.0 0.5 632 569 253 125 1 35 0.1 A/3216-18 T491A104(1)035A(2) 0.5 4.0 20.0 61 55 24 125 1 35 0.15 A/3216-18 T491A154(1)035A(2) 0.5 4.0 19.0 63 57 25 125 1 35 0.22 A/3216-18 T491A224(1)035A(2) 0.5 4.0 18.0 65 59 26 125 1 35 0.33 A/3216-18 T491A334(1)035A(2) 0.5 4.0 15.0 71 64 28 125 1 35 0.47 B/3528-21 T491B474(1)035A(2) 0.5 4.0 8.0 103 93 41 125 1 35 0.47 A/3216-18 T491A474(1)035A(2) 0.5 4.0 11.0 79 71 32 125 1 35 0.68 B/3528-21 T491B684(1)035A(2) 0.5 4.0 6.5 114 103 46 125 1 35 0.68 A/3216-18 T491A684(1)035A(2) 0.5 4.0 8.0 97 87 39 125 1 35 1 B/3528-21 T491B105(1)035A(2) 0.5 4.0 5.0 130 117 52 125 1 35 1 A/3216-18 T491A105(1)035A(2) 0.5 4.0 7.0 100 90 40 125 1 35 1.5 A/3216-18 T491A155(1)035A(2) 0.5 6.0 7.0 104 94 42 125 1 35 1.5 C/6032-28 T491C155(1)035A(2) 0.5 6.0 4.5 156 140 62 125 1 35 1.5 B/3528-21 T491B155(1)035A(2) 0.5 6.0 5.0 130 117 52 125 1 35 2.2 C/6032-28 T491C225(1)035A(2) 0.8 6.0 3.2 185 167 74 125 1 35 2.2 A/3216-18 T491A225(1)035AT 0.8 6.0 4.0 129 116 52 125 1 35 2.2 B/3528-21 T491B225(1)035A(2) 0.8 6.0 4.0 146 131 58 125 1 35 3.3 C/6032-28 T491C335(1)035A(2) 1.2 6.0 2.0 235 212 94 125 1 35 3.3 B/3528-21 T491B335(1)035A(2) 1.2 6.0 3.5 156 140 62 125 1 35 3.3 D/7343-31 T491D335(1)035A(2) 1.2 6.0 2.0 274 247 110 125 1 35 4.7 D/7343-31 T491D475(1)035A(2) 1.6 6.0 1.5 316 284 126 125 1 35 4.7 B/3528-21 T491B475(1)035AT 1.6 6.0 3.0 166 149 66 125 1 35 4.7 C/6032-28 T491C475(1)035A(2) 1.6 6.0 2.0 224 202 90 125 1 35 6.8 D/7343-31 T491D685(1)035A(2) 2.4 6.0 1.2 340 306 136 125 1 35 6.8 V/7343-20 T491V685(1)035AT 2.4 6.0 1.2 323 291 129 125 1 35 6.8 C/6032-28 T491C685(1)035A(2) 2.4 6.0 1.8 247 222 99 125 1 35 10 D/7343-31 T491D106(1)035A(2) 3.5 6.0 1.0 387 348 155 125 1 35 10 C/6032-28 T491C106(1)035A(2) 3.5 6.0 1.6 262 236 105 125 1 35 10 V/7343-20 T491V106(1)035A(2) 3.5 6.0 1.0 250 225 100 125 1 35 15 C/6032-28 T491C156(1)035A(2) 5.3 6.0 1.0 332 299 133 125 1 35 15 X/7343-43 T491X156(1)035A(2) 5.3 6.0 0.9 428 385 171 125 1 35 15 D/7343-31 T491D156(1)035A(2) 5.3 6.0 0.8 433 390 173 125 1 35 22 X/7343-43 T491X226(1)035A(2) 7.7 6.0 0.7 486 437 194 125 1 35 22 D/7343-31 T491D226(1)035A(2) 7.7 6.0 0.7 463 417 185 125 1 35 33 X/7343-43 T491X336(1)035A(2) 11.6 6.0 0.6 524 472 210 125 1 35 33 D/7343-31 T491D336(1)035A(2) 11.6 6.0 0.6 500 450 200 125 1 35 47 X/7343-43 T491X476(1)035A(2) 16.5 6.0 0.6 524 472 210 125 1 35 47 E/7360-38 T491E476(1)035A(2) 16.5 10.0 0.5 632 569 253 125 1 50 0.1 A/3216-18 T491A104(1)050A(2) 0.5 4.0 20.0 61 55 24 125 1 50 0.15 B/3528-21 T491B154(1)050A(2) 0.5 4.0 16.0 73 66 29 125 1 50 0.15 A/3216-18 T491A154(1)050A(2) 0.5 4.0 15.0 71 64 28 125 1 50 0.22 B/3528-21 T491B224(1)050A(2) 0.5 4.0 14.0 78 70 31 125 1 50 0.22 A/3216-18 T491A224(1)050AT 0.5 4.0 18.0 65 59 26 125 1 µA at +20°C % at +20°C Ω at +20°C mA at mA at mA at (See below for Reflow Temp VDC at 85°C µF KEMET/EIA Maximum/ 120 Hz 100 kHz +25°C +85°C +125°C °C part options) ≤ 260 °C 5 Minutes Maximum Maximum 100 kHz 100 kHz 100 kHz Maximum Rated Rated Case Code/ KEMET Part DC Maximum Allowable DF ESR Operating MSL Voltage Cap Case Size Number Leakage Ripple Current (rms) Temp (1) To complete KEMET part number, insert M for ±20% or K for ±10%. Designates Capacitance Tolerance. (2) To complete KEMET part number, insert T = 100% Matte Tin (Sn)-plated, G = Gold-plated, H = Standard solder coated (SnPb 5% Pb minimum), N = Non-magnetic 100% Tin (Sn), M = Non-magnetic (SnPb). Designates Termination Finish. Refer to Ordering Information for additional details. Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitution will be marked with the higher voltage rating. Substitutions can include better than series. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2005_T491 • 12/12/2019 1122 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

Tantalum Surface Mount Capacitors – Standard Tantalum T491 Industrial Grade MnO 2 Table 1 – Ratings & Part Number Reference cont. Case Maximum Rated Rated KEMET Part DC Maximum Allowable Code/ DF ESR Operating MSL Voltage Cap Number Leakage Ripple Current (rms) Case Size Temp µA at +20°C % at +20°C Ω at +20°C mA at mA at mA at (See below for Reflow Temp VDC at 85°C µF KEMET/EIA Maximum/ 120 Hz 100 kHz +25°C +85°C +125°C °C part options) ≤ 260 °C 5 Minutes Maximum Maximum 100 kHz 100 kHz 100 kHz 50 0.33 A/3216-18 T491A334(1)050A(2) 0.5 4.0 14.0 73 66 29 125 1 50 0.33 B/3528-21 T491B334(1)050A(2) 0.5 4.0 10.0 92 83 37 125 1 50 0.47 A/3216-18 T491A474(1)050A(2) 0.5 4.0 9.5 280 253 112 125 1 50 0.47 C/6032-28 T491C474(1)050A(2) 0.5 4.0 7.2 117 105 47 125 1 50 0.47 B/3528-21 T491B474(1)050A(2) 0.5 4.0 9.0 97 87 39 125 1 50 0.68 A/3216-18 T491A684(1)050A(2) 0.5 4.0 8.0 97 87 39 125 1 50 0.68 C/6032-28 T491C684(1)050A(2) 0.5 4.0 6.4 125 113 50 125 1 50 0.68 B/3528-21 T491B684(1)050A(2) 0.5 4.0 8.0 103 93 41 125 1 50 1 A/3216-18 T491A105(1)050A(2) 0.5 4.0 7.0 104 94 42 125 1 50 1 C/6032-28 T491C105(1)050A(2) 0.5 4.0 4.8 148 133 59 125 1 50 1 B/3528-21 T491B105(1)050A(2) 0.5 6.0 6.0 119 107 48 125 1 50 1 V/7343-20 T491V105(1)050A(2) 0.5 4.0 6.0 144 130 58 125 1 50 1.5 D/7343-31 T491D155(1)050A(2) 0.8 6.0 3.5 207 186 83 125 1 50 1.5 C/6032-28 T491C155(1)050A(2) 0.8 6.0 4.0 166 149 66 125 1 50 2.2 D/7343-31 T491D225(1)050A(2) 1.1 6.0 2.5 245 221 98 125 1 50 2.2 C/6032-28 T491C225(1)050A(2) 1.1 6.0 3.0 191 172 76 125 1 50 3.3 C/6032-28 T491C335(1)050AT 1.7 6.0 2.0 235 212 94 125 1 50 3.3 D/7343-31 T491D335(1)050A(2) 1.7 6.0 1.6 274 247 110 125 1 50 4.7 C/6032-28 T491C475(1)050A(2) 2.4 4.0 1.4 280 252 112 125 1 50 4.7 D/7343-31 T491D475(1)050A(2) 2.4 6.0 1.2 354 319 142 125 1 50 6.8 X/7343-43 T491X685(1)050A(2) 3.4 6.0 0.8 406 365 162 125 1 50 6.8 D/7343-31 T491D685(1)050A(2) 3.4 6.0 0.8 387 348 155 125 1 50 10 X/7343-43 T491X106(1)050A(2) 5.0 6.0 0.7 486 437 194 125 1 50 10 D/7343-31 T491D106(1)050A(2) 5.0 6.0 0.8 433 390 173 125 1 50 15 X/7343-43 T491X156(1)050A(2) 7.5 8.0 0.7 486 437 194 125 1 50 22 X/7343-43 T491X226(1)050A(2) 11.0 10.0 0.6 524 472 210 125 1 µA at +20°C % at +20°C Ω at +20°C mA at mA at mA at (See below for Reflow Temp VDC at 85°C µF KEMET/EIA Maximum/ 120 Hz 100 kHz +25°C +85°C +125°C °C part options) ≤ 260 °C 5 Minutes Maximum Maximum 100 kHz 100 kHz 100 kHz Maximum Rated Rated Case Code/ KEMET Part DC Maximum Allowable DF ESR Operating MSL Voltage Cap Case Size Number Leakage Ripple Current (rms) Temp (1) To complete KEMET part number, insert M for ±20% or K for ±10%. Designates Capacitance Tolerance. (2) To complete KEMET part number, insert T = 100% Matte Tin (Sn)-plated, G = Gold-plated, H = Standard solder coated (SnPb 5% Pb minimum), N = Non-magnetic 100% Tin (Sn), M = Non-magnetic (SnPb). Designates Termination Finish. Refer to Ordering Information for additional details. Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitution will be marked with the higher voltage rating. Substitutions can include better than series. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2005_T491 • 12/12/2019 1133 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

Tantalum Surface Mount Capacitors – Standard Tantalum T491 Industrial Grade MnO 2 Recommended Voltage Derating Guidelines 120% −55°C to 85°C 85°C to 125°C % Change in working DC 100% voltage with temperature VR 67% of VR ge a Recaopmplmiceantidoend v molataxigme um 50% of VR 33% of VR ng Volt 80% % Chanwgeit hin T Weomrpkienrga tDuCre Voltage 67% ki 60% or W % 40% Recommended Maximum Application Voltage 33% (As % of Rated Voltage) 20% 0% −55 25 85 125 Temperature (ºC ) Ripple Current/Ripple Voltage Permissible AC ripple voltage and current are related to Maximum Power equivalent series resistance (ESR) and the power dissipation KEMET EIA Dissipation (P max) capabilities of the device. Permissible AC ripple voltage Case Code Case Code mWatts at 25°C which may be applied is limited by two criteria: w/+20°C Rise 1. The positive peak AC voltage plus the DC bias voltage, A 3216–18 75 if any, must not exceed the DC voltage rating of the B 3528–21 85 capacitor. C 6032–28 110 2. The negative peak AC voltage in combination with D 7343–31 150 X 7343–43 165 bias voltage, if any, must not exceed the allowable limits E 7360–38 200 specified for the reverse voltage. See the Reverse Voltage M 3528–15 120 section for allowable limits. S 3216–12 60 The maximum power dissipation by case size can be T 3528–12 70 determined using the table at right. The maximum power U 6032–15 90 dissipation rating stated in the table must be reduced with V 7343–20 125 increasing environmental operating temperatures. Refer to W 7343–15 180 the table below for temperature compensation requirements. T510X 7343–43 270 T510E 7360–38 285 Temperature Compensation Multipliers for Maximum Ripple Current Using the P max of the device, the maximum allowable rms ripple current or voltage may be determined. T ≤ 25°C T ≤ 85°C T ≤ 125°C 1.00 0.90 0.40 I(max) = √P max/R T = Environmental Temperature E(max) = Z √P max/R The maximum power dissipation rating must be reduced with increasing I = rms ripple current (amperes) environmental operating temperatures. Refer to the Temperature E = rms ripple voltage (volts) Compensation Multiplier table for details. P max = maximum power dissipation (watts) R = ESR at specified frequency (ohms) Z = Impedance at specified frequency (ohms) © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2005_T491 • 12/12/2019 1144 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

Tantalum Surface Mount Capacitors – Standard Tantalum T491 Industrial Grade MnO 2 Reverse Voltage Solid tantalum capacitors are polar devices and may be permanently damaged or destroyed if connected with the wrong polarity. The positive terminal is identified on the capacitor body by a stripe, plus, in some cases a beveled edge. A small degree of transient reverse voltage is permissible for short periods per the table. The capacitors should not be operated continuously in reverse mode, even within these limits. Temperature Permissible Transient Reverse Voltage 25°C 15% of Rated Voltage 85°C 5% of Rated Voltage 125°C 1% of Rated Voltage Table 2 – Land Dimensions/Courtyard Metric Density Level A: Density Level B: Density Level C: KEMET Size Maximum (Most) Land Median (Nominal) Land Minimum (Least) Land Code Protrusion (mm) Protrusion (mm) Protrusion (mm) Case EIA W L S V1 V2 W L S V1 V2 W L S V1 V2 A 3216–18 1.35 2.20 0.62 6.02 2.80 1.23 1.80 0.82 4.92 2.30 1.13 1.42 0.98 4.06 2.04 B 3528–21 2.35 2.21 0.92 6.32 4.00 2.23 1.80 1.12 5.22 3.50 2.13 1.42 1.28 4.36 3.24 C 6032–28 2.35 2.77 2.37 8.92 4.50 2.23 2.37 2.57 7.82 4.00 2.13 1.99 2.73 6.96 3.74 D 7343–31 2.55 2.77 3.67 10.22 5.60 2.43 2.37 3.87 9.12 5.10 2.33 1.99 4.03 8.26 4.84 E1 7360–38 4.25 2.77 3.67 10.22 7.30 4.13 2.37 3.87 9.12 6.80 4.03 1.99 4.03 8.26 6.54 M 3528-15 2.35 2.20 0.92 6.32 4.00 2.23 1.80 1.12 5.22 3.50 2.13 1.42 1.28 4.36 3.24 S2 3216–12 1.35 2.20 0.62 6.02 2.80 1.23 1.80 0.82 4.92 2.30 1.13 1.42 0.98 4.06 2.04 T 3528–12 2.35 2.20 0.92 6.32 4.00 2.23 1.80 1.12 5.22 3.50 2.13 1.42 1.28 4.36 3.24 U 6032–15 2.35 2.77 2.37 8.92 4.50 2.23 2.37 2.57 7.82 4.00 2.13 1.99 2.73 6.96 3.74 V 7343–21 2.55 2.77 3.67 10.22 5.60 2.43 2.37 3.87 9.12 5.10 2.33 1.99 4.03 8.26 4.84 W 7343–15 2.55 2.77 3.67 10.22 5.60 2.43 2.37 3.87 9.12 5.10 2.33 1.99 4.03 8.26 4.84 X1 7343–43 2.55 2.77 3.67 10.22 5.60 2.43 2.37 3.87 9.12 5.10 2.33 1.99 4.03 8.26 4.84 Density Level A: For low-density product applications. Recommended for wave solder applications and provides a wider process window for reflow solder processes. Density Level B: For products with a moderate level of component density. Provides a robust solder attachment condition for reflow solder processes. Density Level C: For high component density product applications. Before adapting the minimum land pattern variations, the user should perform qualification testing based on the conditions outlined in IPC standard 7351 (IPC–7351). 1 Height of these chips may create problems in wave soldering. 2 Land pattern geometry is too small for silkscreen outline. V1 L L W W V2 S Grid Placement Courtyard © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2005_T491 • 12/12/2019 1155 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

Tantalum Surface Mount Capacitors – Standard Tantalum T491 Industrial Grade MnO 2 Soldering Process The KEMET families of surface mount capacitors are Profile Feature SnPb Assembly Pb-Free Assembly compatible with wave (single or dual), convection, IR, or vapor Preheat/Soak phase reflow techniques. Preheating of these components Temperature Minimum (T ) 100°C 150°C is recommended to avoid extreme thermal stress. KEMET's Smin Temperature Maximum (T ) 150°C 200°C recommended profile conditions for convection and IR Smax Time (t) from T to T ) 60 – 120 seconds 60 – 120 seconds reflow reflect the profile conditions of the IPC/J-STD-020D s smin smax Ramp-up Rate (T to T) 3°C/second maximum 3°C/second maximum standard for moisture sensitivity testing. The devices can L P Liquidous Temperature (T) 183°C 217°C safely withstand a maximum of three reflow passes at these L Time Above Liquidous (t) 60 – 150 seconds 60 – 150 seconds conditions. L 220°C* 250°C* Peak Temperature (T) P 235°C** 260°C** Time within 5°C of Maximum Please note that although the X/7343–43 case size can Peak Temperature (t) 20 seconds maximum 30 seconds maximum P withstand wave soldering, the tall profile (4.3 mm maximum) Ramp-down Rate (T to T) 6°C/second maximum 6°C/second maximum P L dictates care in wave process development. Time 25°C to Peak 6 minutes maximum 8 minutes maximum Temperature Note: All temperatures refer to the center of the package, measured on the Hand soldering should be performed with care due to the package body surface that is facing up during assembly reflow. difficulty in process control. If performed, care should be * For Case Size height > 2.5 mm taken to avoid contact of the soldering iron to the molded ** For Case Size height ≤ 2.5 mm case. The iron should be used to heat the solder pad, applying solder between the pad and the termination, until reflow T P t occurs. Once reflow occurs, the iron should be removed Maximum Ramp-up Rate = 3°C/second P Maximum Ramp-down Rate = 6°C/second immediately. “Wiping” the edges of a chip and heating the top T surface is not recommended. re L tL u rat Tsmax e During typical reflow operations, a slight darkening of the mp T e smin t gold-colored epoxy may be observed. This slight darkening is T s normal and not harmful to the product. Marking permanency is not affected by this change. 25 25°C to Peak Time Storage Tantalum chip capacitors should be stored in normal working environments. While the chips themselves are quite robust in other environments, solderability will be degraded by exposure to high temperatures, high humidity, corrosive atmospheres, and long term storage. In addition, packaging materials will be degraded by high temperature – reels may soften or warp and tape peel force may increase. KEMET recommends that maximum storage temperature not exceed 40°C and maximum storage humidity not exceed 60% relative humidity. Temperature fluctuations should be minimized to avoid condensation on the parts and atmospheres should be free of chlorine and sulphur bearing compounds. For optimized solderability, chip stock should be used promptly, preferably within three years of receipt. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2005_T491 • 12/12/2019 1166 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

Tantalum Surface Mount Capacitors – Standard Tantalum T491 Industrial Grade MnO 2 Construction Molded Epoxy Polarity Stripe (+) Detailed Cross Section Case Silver Paint Polarity (Fourth Layer) Bevel (+) Tantalum Wire Leadframe (− Cathode) Washer Tantalum Wire Weld (to attach wire) Carbon (Third Layer) Washer Silver Adhesive TaO Dielectric 2 5 Molded Epoxy Leadframe MnO2 (First Layer) Case (+ Anode) (Second Layer) Tantalum Capacitor Marking Date Code * 1st digit = last number of year 5 = 2015 KEMET Industrial Polarity 6 = 2016 Indicator (+) Grade MnO 7 = 2017 2 8 = 2018 Picofarad 9 = 2019 Code 2nd and 3rd digit = week of the 01 = 1st week of the year to year 52 = 52nd week of the year Rated KEMET Voltage ID Date Code* * 908 = 8th week of 2019 © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2005_T491 • 12/12/2019 1177 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

Tantalum Surface Mount Capacitors – Standard Tantalum T491 Industrial Grade MnO 2 Tape & Reel Packaging Information KEMET’s molded chip capacitor families are packaged in 8 and 12 mm plastic tape on 7" and 13" reels in accordance with EIA Standard 481: Embossed Carrier Taping of Surface Mount Components for Automatic Handling. This packaging system is compatible with all tape-fed automatic pick-and-place systems. Right hand orientation only Embossed carrier (+) (−) Embossment Top tape thickness 0.10 mm (0.004”) 8 mm (0.315”) or 180 mm (7.0”) or maximum thickness 12 mm (0.472”) 330 mm (13.”) Table 3 – Packaging Quantity Tape Width Case Code 7" Reel* 13" Reel* (mm) KEMET EIA S 3216-12 8 2,500 10,000 T 3528-12 8 3,000 10,000 M 3528-15 8 2,500 8,000 U 6032-15 12 1,000 5,000 L 6032-19 12 1,000 3,000 W 7343-15 12 1,000 3,000 Z 7343-17 12 1,000 3,000 V 7343-20 12 1,000 3,000 A 3216-18 8 2,000 9,000 B 3528-21 8 2,000 8,000 C 6032-28 12 500 3,000 D 7343-31 12 500 2,500 Q 7343-12 12 1,000 3,000 Y 7343-40 12 500 2,000 X 7343-43 12 500 2,000 E/T428P 7360-38 12 500 2,000 H 7360-20 12 1,000 2,500 O 7360-43 12 250 1,000 * No C-Spec required for 7" reel packaging. C-7280 required for 13" reel packaging. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2005_T491 • 12/12/2019 1188 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

Tantalum Surface Mount Capacitors – Standard Tantalum T491 Industrial Grade MnO 2 Figure 1 – Embossed (Plastic) Carrier Tape Dimensions T P 2 T2 ØD0 P0 t(o1l0e rpaintcchee osn c tuampuel a±0ti.v2e mm) E1 A 0 F K 0 W B1 B0 E2 S P 1 1 T1 Center Lines of Cavity ØD Embossment 1 For cavity size, Cover Tape see Note 1, Table 4 B is for tape feeder reference only, 1 including draft concentric about B0. User Direction of Unreeling Table 4 – Embossed (Plastic) Carrier Tape Dimensions Metric will govern Constant Dimensions — Millimeters (Inches) D Minimum R Reference S Minimum T Tape Size D 1 E P P 1 T Maximum 1 0 Note 1 1 0 2 Note 2 Note 3 Maximum 1.0 25.0 8 mm (0.039) (0.984) 1.5 +0.10/−0.0 1.75 ±0.10 4.0 ±0.10 2.0 ±0.05 0.600 0.600 0.100 (0.059 +0.004/−0.0) (0.069 ±0.004) (0.157 ±0.004) (0.079 ±0.002) (0.024) (0.024) (0.004) 1.5 30 12 mm (0.059) (1.181) Variable Dimensions — Millimeters (Inches) B Maximum Tape Size Pitch 1 E Minimum F P T Maximum W Maximum A, B & K Note 4 2 1 2 0 0 0 4.35 6.25 3.5 ±0.05 2.0 ±0.05 or 4.0 ±0.10 2.5 8.3 8 mm Single (4 mm) (0.171) (0.246) (0.138 ±0.002) (0.079 ±0.002 or 0.157 ±0.004) (0.098) (0.327) Single (4 mm) 2.0 ±0.05 (0.079 ±0.002) or Note 5 8.2 10.25 5.5 ±0.05 4.6 12.3 12 mm and Double 4.0 ±0.10 (0.157 ±0.004) or (0.323) (0.404) (0.217 ±0.002) (0.181) (0.484) (8 mm) 8.0 ±0.10 (0.315 ±0.004) 1. The embossment hole location shall be measured from the sprocket hole controlling the location of the embossment. Dimensions of embossment location and hole location shall be applied independent of each other. 2. The tape, with or without components, shall pass around R without damage (see Figure 4). 3. If S < 1.0 mm, there may not be enough area for cover tape to be properly applied (see EIA Standard 481–D, paragraph 4.3, section b). 1 4. B dimension is a reference dimension for tape feeder clearance only. 1 5. The cavity defi ned by A, B and K shall surround the component with suffi cient clearance that: 0 0 0 (a) the component does not protrude above the top surface of the carrier tape. (b) the component can be removed from the cavity in a vertical direction without mechanical restriction, after the top cover tape has been removed. (c) rotation of the component is limited to 20° maximum for 8 and 12 mm tapes (see Figure 2). (d) lateral movement of the component is restricted to 0.5 mm maximum for 8 mm and 12 mm wide tape (see Figure 3). (e) see Addendum in EIA Standard 481–D for standards relating to more precise taping requirements. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2005_T491 • 12/12/2019 1199 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

Tantalum Surface Mount Capacitors – Standard Tantalum T491 Industrial Grade MnO 2 Packaging Information Performance Notes 1. Cover tape break force: 1.0 kg minimum. 2. Cover tape peel strength: The total peel strength of the cover tape from the carrier tape shall be: Tape Width Peel Strength 8 mm 0.1 to 1.0 newton (10 to 100 gf) 12 mm 0.1 to 1.3 newton (10 to 130 gf) The direction of the pull shall be opposite the direction of the carrier tape travel. The pull angle of the carrier tape shall be 165° to 180° from the plane of the carrier tape. During peeling, the carrier and/or cover tape shall be pulled at a velocity of 300 ±10 mm/minute. 3. Labeling: Bar code labeling (standard or custom) shall be on the side of the reel opposite the sprocket holes. Refer to EIA Standards 556 and 624. Figure 2 – Maximum Component Rotation ° T Maximum Component Rotation Maximum Component Rotation Top View Side View Typical Pocket Centerline Tape Maximum ° Width (mm) Rotation ( °) s T 8, 12 20 Bo Tape Maximum Width (mm) Rotation ( °) S 8, 12 20 Typical Component Centerline Ao Figure 3 – Maximum Lateral Movement Figure 4 – Bending Radius 8 mm & 12 mm Tape Embossed Punched Carrier Carrier 0.5 mm maximum 0.5 mm maximum Bending R R Radius © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2005_T491 • 12/12/2019 2200 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

Tantalum Surface Mount Capacitors – Standard Tantalum T491 Industrial Grade MnO 2 Figure 5 – Reel Dimensions W Full Radius, (Includes Access Hole at 3 See Note Slot Location flange distortion (Ø 40 mm minimum) at outer edge) W (Measured at hub) 2 A D (See Note) N C (Arbor hole W (Measured at hub) diameter) 1 If present, tape slot in core for tape start: 2.5 mm minimum width x 10.0 mm minimum depth B (see Note) Note: Drive spokes optional; if used, dimensions B and D shall apply. Table 5 – Reel Dimensions Metric will govern Constant Dimensions — Millimeters (Inches) Tape Size A B Minimum C D Minimum 178 ±0.20 8 mm (7.008 ±0.008) 1.5 13.0 +0.5/−0.2 20.2 or (0.059) (0.521 +0.02/−0.008) (0.795) 12 mm 330 ±0.20 (13.000 ±0.008) Variable Dimensions — Millimeters (Inches) Tape Size N Minimum W W Maximum W 1 2 3 8.4 +1.5/−0.0 14.4 8 mm 50 (0.331 +0.059/−0.0) (0.567) Shall accommodate tape (1.969) 12.4 +2.0/−0.0 18.4 width without interference 12 mm (0.488 +0.078/−0.0) (0.724) © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2005_T491 • 12/12/2019 2211 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

Tantalum Surface Mount Capacitors – Standard Tantalum T491 Industrial Grade MnO 2 Figure 6 – Tape Leader & Trailer Dimensions Embossed Carrier Punched Carrier Carrier Tape 8 mm & 12 mm only Round Sprocket Holes END START Top Cover Tape Elongated Sprocket Holes (32 mm tape and wider) 100 mm minimum Leader Trailer Components 400 mm minimum 160 mm minimum Top Cover Tape Figure 7 – Maximum Camber Elongated Sprocket Holes Carrier Tape (32 mm & wider tapes) Round Sprocket Holes 1 mm maximum, either direction Straight Edge 250 mm © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2005_T491 • 12/12/2019 2222 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

Tantalum Surface Mount Capacitors – Standard Tantalum T491 Industrial Grade MnO 2 KEMET Electronics Corporation Sales Offi ces For a complete list of our global sales offi ces, please visit www.kemet.com/sales. Disclaimer All product specifi cations, statements, information and data (collectively, the “Information”) in this datasheet are subject to change. The customer is responsible for checking and verifying the extent to which the Information contained in this publication is applicable to an order at the time the order is placed. All Information given herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied. Statements of suitability for certain applications are based on KEMET Electronics Corporation’s (“KEMET”) knowledge of typical operating conditions for such applications, but are not intended to constitute – and KEMET specifi cally disclaims – any warranty concerning suitability for a specifi c customer application or use. The Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by KEMET with reference to the use of KEMET’s products is given gratis, and KEMET assumes no obligation or liability for the advice given or results obtained. Although KEMET designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage. Although all product–related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicted or that other measures may not be required. KEMET is a registered trademark of KEMET Electronics Corporation. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2005_T491 • 12/12/2019 2233 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: K EMET: T491D106M035AT T491D685K035AT T491A105K016AS T491B155M025AT T491D336M016AT T491A475K016AG T491B106K016AG T491C226K025AT T491B226K004AT T491D156K020AT T491B156K004AT T491A156K004AT T491A156K006AT T491B157M004AT T491B107M004AT T491B107M006AT T491A107M004AT T491B475K025AT T491B684K050AT T491A475K020AT T491C475K020AT T491A475K004AT T491A475K006AT T491B105K025AT T491A156K010AT T491X156K050AT T491C156K025AT T491B336K010AT T491C336M020AT T491D155K050AT T491A106K016AT T491D685K050AT T491B685K006AT T491A685K004AT T491C476K016AT T491B685K025AT T491X476K035AT T491D337K004AT T491D337K006AT T491B476K006AT T491B476K004AT T491X476K025AT T491A225M016AT T491X336K035AT T491B336K004AT T491A336K004AT T491B226K016AT T491A225K006AT T491C225K025AT T491B686K006AT T491E687M006AT T491D477K004AT T491A334K025AT T491X106M050AT T491E477M010AT T491A154K050AT T491B476M010AT T491A476M004AT T491A335K006AT T491A335K004AT T491X157K010AT T491D157K004AT T491D157K016AT T491X686M025AT T491B686M010AT T491D686K020AT T491D686K004AT T491A686K004AT T491E108M004AT T491D337M010AT T491B335K035AT T491A226M010AT T491B155M025AT7280 T491C106K010AH T491A475K016AT T491A104K035AT T491A104K050AT T491A104M035AT T491A105K016AH T491A105K020AT T491A105K025AG T491A105K025AT T491A105K035AT T491A105M016AT T491A105M020AT T491A105M025AT T491A105M035AT T491A106K010AT T491A106M006AT T491A106M010AT T491A106M016AT T491A154K035AT T491A154M035AT T491A155K010AT T491A155K016AT T491A155K020AT T491A155K025AT T491A155M010AT T491A155M016AT T491A155M025AT