T4 series 4 A Triacs Datasheet  production data . Table 1. Main characteristics (cid:36)(cid:21) Symbol Value Unit I 4 A T(rms) (cid:42) V , V 600 to 800 V (cid:36)(cid:21) (cid:36)(cid:20) DRM RRM (cid:36)(cid:21) I 5 to 35 mA GT Table 2. Device summary (cid:36)(cid:20) (cid:36)(cid:20) (cid:36)(cid:21)(cid:42) (cid:55)(cid:50)(cid:16)(cid:21)(cid:21)(cid:19)(cid:36)(cid:37) (cid:36)(cid:21)(cid:42) (cid:44)(cid:51)(cid:36)(cid:46) Symbol(1) Marking (cid:36)(cid:21) T405-xxxB T405-xxxB-TR (cid:36)(cid:20)(cid:36)(cid:21) T405-xxxH (cid:42) (cid:39)(cid:51)(cid:36)(cid:46) T405-xxxT T410-xxxB T410-xxxB-TR Features see Table11 T410-xxxH  Three quadrants Triac T410-xxxT  600 to 800 V V /V DRM RRM T435-xxxB T435-xxxB-TR Applications T435-xxxH  General purpose AC inductive loads T435-xxxT  Motor control circuits 1. xxx = Voltage: 600 V, 700 V or 800 V (see Table10).  Small home appliances Description Based on ST’s Snubberless / logic level technology providing high commutation performances, the T4 series is suitable for use on AC inductive loads. They are recommended for applications using universal motors, electro valves, kitchen aid equipments, power tools, and dishwashers. November 2016 DocID7699 Rev 9 1/15 This is information on a product in full production. www.st.com 15

Characteristics T4 series 1 Characteristics Table 3. Absolute maximum ratings (T = 25 °C unless otherwise stated) j Symbol Parameter Value Unit On-state rms current IPAK, DPAK, I T = 110 °C 4 A T(rms) (full sine wave) TO-220AB c Non repetitive surge peak on-state F = 50 Hz t = 20 ms 30 I A TSM current (full cycle, T initial = 25 °C) j F = 60 Hz t = 16.7 ms 31 I²t I²t value for fusing t = 10 ms 5.1 A²s p Critical rate of rise of on-state dI/dt current I = 2 x I , t ≤ 100 ns F = 120 Hz Tj = 125 °C 50 A/µs G GT r I Peak gate current t = 20 µs T = 125 °C 4 A GM p j P Average gate power dissipation T = 125 °C 1 W G(AV) j T Storage junction temperature range - 40 to +150 stg °C T Operating junction temperature range - 40 to +125 j Table 4. Electrical characteristics (T = 25 °C, unless otherwise stated) j Value Unit Symbol Test conditions Quadrant T405 T410 T435 I (1) V = 12 V, R = 30 Ω I - II - III Max. 5 10 35 mA GT D L V V = 12 V, R = 30 Ω I - II - III Max. 1.3 V GT D L V V = V , R = 3.3 kΩ, T = 125 °C I - II - III Min. 0.2 V GD D DRM L j I (2) I = 100 mA Max. 10 15 35 mA H T I - III Max. 10 25 50 I I = 1.2 I mA L G GT II Max. 15 30 60 dV/dt(2) V = 67% V , gate open T = 125 °C Min. 20 40 400 V/µs D DRM j (dV/dt)c = 0.1 V/µs 1.8 2.7 (dI/dt)c(2) (dV/dt)c = 10 V/µs T = 125 °C Min. 0.9 2.0 A/ms j (without snubber) 2.5 1. Minimum I is guaranteed at 5% of I max. GT GT 2. For both polarities of A2 referenced to A1 2/15 DocID7699 Rev 9

T4 series Characteristics Table 5. Static characteristics Symbol Test conditions Value Unit V (1) I = 5.5 A, t = 380 µs T = 25 °C Max. 1.56 V TM TM p j V (1) Threshold voltage T = 125 °C Max. 0.89 V t0 j R (1) Dynamic resistance T = 125 °C Max. 120 m d j IDRM V = V Tj = 25 °C Max. 5 µA IRRM DRM RRM Tj = 125 °C 1 mA 1. For both polarities of A2 referenced to A1 Table 6. Thermal resistance Symbol Parameter Value Unit R Junction to case (AC) IPAK, DPAK,TO-220AB 2.6 °C/W th(j-c) Junction to ambient S(1) = 0.5 cm² DPAK 70 °C/W R TO-220AB 60 °C/W th(j-a) Junction to ambient IPAK 100 °C/W 1. S = Copper surface under tab. DocID7699 Rev 9 3/15

Characteristics T4 series Figure 1. Maximum power dissipation versus Figure 2. RMS on-state current versus case RMS on-state current (full cycle) temperature (full cycle) P(W) (cid:44)(cid:55)(cid:11)(cid:53)(cid:48)(cid:54)(cid:12)(cid:11)(cid:36)(cid:12) 6 (cid:23)(cid:17)(cid:24) (cid:23)(cid:17)(cid:19) 5 (cid:22)(cid:17)(cid:24) (cid:55)(cid:50)(cid:16)(cid:21)(cid:21)(cid:19)(cid:36)(cid:37)(cid:3)(cid:18)(cid:3)(cid:39)(cid:51)(cid:36)(cid:46)(cid:3)(cid:18)(cid:3)(cid:44)(cid:51)(cid:36)(cid:46) 4 (cid:22)(cid:17)(cid:19) (cid:21)(cid:17)(cid:24) 3 (cid:21)(cid:17)(cid:19) 2 (cid:20)(cid:17)(cid:24) (cid:20)(cid:17)(cid:19) 1 (cid:19)(cid:17)(cid:24) IT(RMS)(A) (cid:55)(cid:38)(cid:11)(cid:131)(cid:38)(cid:12) (cid:19)(cid:17)(cid:19) 0 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 (cid:19) (cid:21)(cid:24) (cid:24)(cid:19) (cid:26)(cid:24) (cid:20)(cid:19)(cid:19) (cid:20)(cid:21)(cid:24) Figure 3. RMS on-state current versus ambient Figure 4. Relative variation of thermal temperature (printed circuit board FR4, copper impedance versus pulse duration thickness: 35µm) (full cycle) (cid:21)(cid:17)(cid:19) (cid:44)(cid:55)(cid:11)(cid:53)(cid:48)(cid:54)(cid:12)(cid:11)(cid:36)(cid:12) (cid:20)(cid:40)(cid:14)(cid:19)(cid:46)(cid:3)(cid:32)(cid:3)(cid:62)(cid:3)(cid:61)(cid:87)(cid:75)(cid:3)(cid:18)(cid:3)(cid:53)(cid:87)(cid:75)(cid:64) (cid:20)(cid:17)(cid:27) (cid:39)(cid:51)(cid:36)(cid:46)(cid:3)(cid:11)(cid:54)(cid:3)(cid:32)(cid:3)(cid:19)(cid:17)(cid:24)(cid:3)(cid:70)(cid:80)(cid:240)(cid:12) (cid:53)(cid:87)(cid:75)(cid:11)(cid:77)(cid:16)(cid:70)(cid:12) (cid:20)(cid:17)(cid:25) (cid:53)(cid:87)(cid:75)(cid:11)(cid:77)(cid:16)(cid:68)(cid:12) (cid:20)(cid:17)(cid:23) (cid:20)(cid:17)(cid:21) (cid:55)(cid:50)(cid:16)(cid:21)(cid:21)(cid:19)(cid:36)(cid:37)(cid:3)(cid:18)(cid:3)(cid:39)(cid:51)(cid:36)(cid:46)(cid:3)(cid:18)(cid:3)(cid:44)(cid:51)(cid:36)(cid:46) (cid:20)(cid:40)(cid:16)(cid:20) (cid:20)(cid:17)(cid:19) (cid:19)(cid:17)(cid:27) (cid:19)(cid:17)(cid:25) (cid:39)(cid:51)(cid:36)(cid:46)(cid:3)(cid:18)(cid:3)(cid:44)(cid:51)(cid:36)(cid:46) (cid:19)(cid:17)(cid:23) (cid:19)(cid:17)(cid:21) (cid:55)(cid:68)(cid:11)(cid:131)(cid:38)(cid:12) (cid:20)(cid:40)(cid:16)(cid:21) (cid:87)(cid:83)(cid:11)(cid:86)(cid:12) (cid:19)(cid:17)(cid:19) (cid:20)(cid:40)(cid:16)(cid:21) (cid:20)(cid:40)(cid:16)(cid:20) (cid:20)(cid:40)(cid:16)(cid:19) (cid:20)(cid:40)(cid:14)(cid:20) (cid:20)(cid:40)(cid:14)(cid:20) (cid:24)(cid:40)(cid:14)(cid:21) (cid:19) (cid:21)(cid:24) (cid:24)(cid:19) (cid:26)(cid:24) (cid:20)(cid:19)(cid:19) (cid:20)(cid:21)(cid:24) Figure 5. On-state characteristics Figure 6. Surge peak on-state current versus (maximum values) number of cycles ITM(A) ITSM(A) 30.0 35 Tjmax. 10.0 RVdto== 1 02.09 0mVΩ 30 t=20ms 25 One cycle 20 Non repetitive Tj=Tjmax. Tjinitial=25°C 1.0 15 Tj= 25°C. Repetitive 10 TC=110°C 5 VTM(V) Number of cycles 0.1 0 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 1 10 100 1000 4/15 DocID7699 Rev 9

T4 series Characteristics Figure 7. Non-repetitive surge peak on-state Figure 8. Relative variation of gate trigger current for a sinusoidal pulse current, holding current and latching current with width t < 10 ms versus junction temperature (typical values) p (cid:44)(cid:55)(cid:54)(cid:48)(cid:11)(cid:36)(cid:12) IGT,IH,IL[Tj] /IGT,IH,IL[Tj=25°C] (cid:24)(cid:19)(cid:19) 2.5 (cid:55)(cid:77)(cid:3)(cid:76)(cid:81)(cid:76)(cid:87)(cid:76)(cid:68)(cid:79)(cid:3)(cid:32)(cid:3)(cid:21)(cid:24)(cid:3)(cid:131)(cid:38) (cid:20)(cid:19)(cid:19) (cid:71)(cid:79)(cid:18)(cid:71)(cid:87)(cid:3)(cid:24)(cid:79)(cid:76)(cid:19)(cid:80)(cid:3)(cid:36)(cid:76)(cid:87)(cid:18)(cid:151)(cid:68)(cid:86)(cid:87)(cid:76)(cid:82)(cid:81)(cid:29) 2.0 (cid:44)(cid:55)(cid:54)(cid:48) IGT 1.5 IH& IL (cid:20)(cid:19) 1.0 0.5 (cid:87)(cid:83)(cid:11)(cid:80)(cid:86)(cid:12) Tj(°C) (cid:20) 0.0 (cid:19)(cid:17)(cid:19)(cid:20) (cid:19)(cid:17)(cid:20)(cid:19) (cid:20)(cid:17)(cid:19)(cid:19) (cid:20)(cid:19)(cid:17)(cid:19)(cid:19) -40 -20 0 20 40 60 80 100 120 140 Figure 9. Relative variation of critical rate of Figure 10. Relative variation of critical rate of decrease of main current versus (dV/dt)c decrease of main current versus junction (typical values) temperature (dI/dt)c [(dV/dt)c] / Specified (dI/dt)c (dI/dt)c [Tj] /(dI/dt)c [Tjspecified] 2.4 6 2.2 2.0 5 1.8 1.6 4 1.4 1.2 3 T435 1.0 0.8 2 T410 0.6 T405 0.4 1 0.2 (dV/dt)c (V/µs) Tj(°C) 0.0 0 0.1 1.0 10.0 100.0 0 25 50 75 100 125 Figure 11. DPAK thermal resistance junction to ambient versus copper surface under tab (printed circuit board FR4, copper thickness: 35µm) Rth(j-a)(°C/W) 100 90 80 70 60 50 40 30 20 10 S(cm²) 0 0 4 8 12 16 20 24 28 32 36 40 DocID7699 Rev 9 5/15

Package information T4 series 2 Package information  Molding epoxy meets UL94, V0 and is halogen free  Lead-free package  Recommended torque: 0.4 to 0.6 N·m for TO-220AB In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK® packages, depending on their level of environmental compliance. ECOPACK® specifications, grade definitions and product status are available at: www.st.com. ECOPACK® is an ST trademark. 2.1 DPAK package information Figure 12. DPAK package outline (cid:36) (cid:40) (cid:69)(cid:23) (cid:70)(cid:21) (cid:47)(cid:21) (cid:39)(cid:20) (cid:39) (cid:39) (cid:43) (cid:36)(cid:20) (cid:40)(cid:20) (cid:47)(cid:23) (cid:72) (cid:69) (cid:72)(cid:20) (cid:70) (cid:57)(cid:21) (cid:36)(cid:21) (cid:47) Note: This package drawing may slightly differ from the physical package. However, all the specified dimensions are guaranteed. 6/15 DocID7699 Rev 9

T4 series Package information Table 7. DPAK package mechanical data Dimensions Ref. Millimeters Inches(1) Min. Typ. Max. Min. Typ. Max. A 2.18 2.40 0.086 0.0944 A1 0.9 1.10 0.035 0.0433 A2 0.03 0.23 0.0011 0.0090 b 0.64 0.90 0.0251 0.0354 b4 4.95 5.46 0.1948 0.2149 c 0.46 0.61 0.0181 0.0240 c2 0.46 0.60 0.0181 0.0236 D 5.97 6.22 0.2350 0.2448 D1 4.95 0.1948 E 6.35 6.73 0.2500 0.2649 E1 4.32 0.1700 e 2.286 0.09 e1 4.572 0.18 H 9.35 10.40 0.3681 0.4094 L 1.0 1.78 0.039 0.0700 L2 1.27 0.0500 L4 0.6 1.02 0.023 0.0401 V2 -8° +8° -8° +8° 1. Inch dimensions are only for reference Figure 13. Footprint (dimensions in mm) (cid:25)(cid:17)(cid:26) (cid:22)(cid:17)(cid:19) (cid:22)(cid:17)(cid:19) (cid:36) (cid:23)(cid:17)(cid:24)(cid:26)(cid:21) (cid:25)(cid:17)(cid:26) (cid:37) (cid:20)(cid:17)(cid:25) (cid:55)(cid:75)(cid:72)(cid:3)(cid:71)(cid:72)(cid:89)(cid:76)(cid:70)(cid:72)(cid:3)(cid:80)(cid:88)(cid:86)(cid:87)(cid:3)(cid:69)(cid:72)(cid:3)(cid:83)(cid:82)(cid:86)(cid:76)(cid:87)(cid:76)(cid:82)(cid:81)(cid:72)(cid:71)(cid:3)(cid:90)(cid:76)(cid:87)(cid:75)(cid:76)(cid:81) (cid:19)(cid:17)(cid:19)(cid:24) (cid:36)(cid:37) DocID7699 Rev 9 7/15

Package information T4 series 2.2 IPAK package information Figure 14. IPAK package outline (cid:40) (cid:36) (cid:69)(cid:23) (cid:70)(cid:21) (cid:47)(cid:21) (cid:57)(cid:20) (cid:39) (cid:47)(cid:20) (cid:43) (cid:36)(cid:20) (cid:69)(cid:21) (cid:47) (cid:72) (cid:69) (cid:70) (cid:72)(cid:20) Note: This package drawing may slightly differ from the physical package. However, all the specified dimensions are guaranteed. 8/15 DocID7699 Rev 9

T4 series Package information Table 8. IPAK package mechanical data Dimensions Ref. Millimeters Inches(1) Min. Typ. Max. Min. Typ. Max. A 2.20 2.40 0.0866 0.0945 A1 0.90 1.10 0.0354 0.0433 b 0.64 0.90 0.0252 0.0354 b2 0.95 0.0374 b4 5.20 5.43 0.2047 0.2138 c 0.45 0.60 0.0177 0.0236 c2 0.46 0.60 0.0181 0.0236 D 6 6.20 0.2362 0.2441 E 6.40 6.65 0.2520 0.2618 e 2.28 0.0898 e1 4.40 4.60 0.1732 0.1811 H 16.10 0.6339 L 9 9.60 0.3543 0.3780 L1 0.8 1.20 0.0315 0.0472 L2 0.80 1.25 0.0315 0.0492 V1 10° 10° 1. Inch dimensions are only for reference DocID7699 Rev 9 9/15

Package information T4 series 2.3 TO-220AB (insulated and non-insulated) information Figure 15. TO-220AB (insulated and non-insulated) package outline (cid:37) (cid:38) (cid:145)(cid:3)(cid:44) (cid:69)(cid:21) (cid:47) (cid:41) (cid:36) (cid:44)(cid:23) (cid:79)(cid:22) (cid:70)(cid:21) (cid:68)(cid:20) (cid:79)(cid:21) (cid:68)(cid:21) (cid:48) (cid:70)(cid:20) (cid:69)(cid:20) (cid:72) 10/15 DocID7699 Rev 9

T4 series Package information T a ble 9. TO-220AB (insulated and non-insulated) package mechanical data Dimensions Ref. Millimeters Inches(1) Min. Typ. Max. Min. Typ. Max. A 15.20 15.90 0.5984 0.6259 a1 3.75 0.1476 a2 13.00 14.00 0.5118 0.5511 B 10.00 10.40 0.3937 0.4094 b1 0.61 0.88 0.0240 0.0346 b2 1.23 1.32 0.0484 0.0519 C 4.40 4.60 0.1732 0.1811 c1 0.49 0.70 0.0192 0.0275 c2 2.40 2.72 0.0944 0.1070 e 2.40 2.70 0.0944 0.1062 F 6.20 6.60 0.2440 0.2598 ØI 3.73 3.88 0.1468 0.1527 I4 15.80 16.40 16.80 0.6220 0.6456 0.6614 L 2.65 2.95 0.1043 0.1161 l2 1.14 1.70 0.0448 0.0669 l3 1.14 1.70 0.0448 0.0669 M 2.60 0.1023 1. Inch dimensions are only for reference DocID7699 Rev 9 11/15

Ordering information T4 series 3 Ordering information Figure 16. Order information scheme (cid:55)(cid:3)(cid:3)(cid:3)(cid:23)(cid:3)(cid:3)(cid:3)(cid:19)(cid:24)(cid:3)(cid:3)(cid:3)(cid:16)(cid:3)(cid:25)(cid:19)(cid:19)(cid:3)(cid:3)(cid:3)(cid:37)(cid:3)(cid:3)(cid:3)(cid:11)(cid:16)(cid:55)(cid:53)(cid:12) (cid:55)(cid:85)(cid:76)(cid:68)(cid:70)(cid:3)(cid:86)(cid:72)(cid:85)(cid:76)(cid:72)(cid:86) (cid:38)(cid:88)(cid:85)(cid:85)(cid:72)(cid:81)(cid:87) (cid:23)(cid:3)(cid:32)(cid:3)(cid:23)(cid:3)(cid:36) (cid:54)(cid:72)(cid:81)(cid:86)(cid:76)(cid:87)(cid:76)(cid:89)(cid:76)(cid:87)(cid:92) (cid:19)(cid:24)(cid:3)(cid:32)(cid:3)(cid:24)(cid:3)(cid:80)(cid:36) (cid:20)(cid:19)(cid:3)(cid:32)(cid:3)(cid:20)(cid:19)(cid:3)(cid:80)(cid:36) (cid:22)(cid:24)(cid:3)(cid:32)(cid:3)(cid:22)(cid:24)(cid:3)(cid:80)(cid:36) (cid:57)(cid:82)(cid:79)(cid:87)(cid:68)(cid:74)(cid:72) (cid:25)(cid:19)(cid:19)(cid:3)(cid:32)(cid:3)(cid:25)(cid:19)(cid:19)(cid:3)(cid:57) (cid:26)(cid:19)(cid:19)(cid:3)(cid:32)(cid:3)(cid:26)(cid:19)(cid:19)(cid:3)(cid:57) (cid:27)(cid:19)(cid:19)(cid:3)(cid:32)(cid:3)(cid:27)(cid:19)(cid:19)(cid:3)(cid:57) (cid:51)(cid:68)(cid:70)(cid:78)(cid:68)(cid:74)(cid:72) (cid:37)(cid:3)(cid:32)(cid:3)(cid:39)(cid:51)(cid:36)(cid:46) (cid:43)(cid:3)(cid:32)(cid:3)(cid:44)(cid:51)(cid:36)(cid:46) (cid:55)(cid:3)(cid:32)(cid:3)(cid:55)(cid:50)(cid:16)(cid:21)(cid:21)(cid:19)(cid:36)(cid:37) (cid:51)(cid:68)(cid:70)(cid:78)(cid:76)(cid:81)(cid:74)(cid:3)(cid:80)(cid:82)(cid:71)(cid:72) (cid:37)(cid:79)(cid:68)(cid:81)(cid:78)(cid:3)(cid:32)(cid:3)(cid:55)(cid:88)(cid:69)(cid:72) (cid:16)(cid:55)(cid:53)(cid:3)(cid:32)(cid:3)(cid:55)(cid:68)(cid:83)(cid:72)(cid:3)(cid:68)(cid:81)(cid:71)(cid:3)(cid:85)(cid:72)(cid:72)(cid:79) Table 10. Product selector Voltage (xxx) Part number Sensitivity Type Package 600 V 700 V 800 V T405-xxxB X 5 mA Logic level DPAK T405-xxxB-TR X X X 5 mA Logic level DPAK T405-xxxH X X 5 mA Logic level IPAK T405-xxxT X 5 mA Logic level TO-220AB T410-xxxB X 10 mA Logic level DPAK T410-xxxB-TR X X 10 mA Logic level DPAK T410-xxxH X X 10 mA Logic level IPAK T410-xxxT X X X 10 mA Logic level TO-220AB T435-xxxB X 35 mA Snubberless DPAK T435-xxxB-TR X X X 35 mA Snubberless DPAK T435-xxxH X X 35 mA Snubberless IPAK T435-xxxT X X 35 mA Snubberless TO-220AB Blank = Unavailable 12/15 DocID7699 Rev 9

T4 series Ordering information Table 11. Ordering information Order code Marking Package Weight Base qty. Delivery mode T405-600B T4 0560 T410-600B T4 1060 75 Tube T435-600B T4 3560 T405-600B-TR T4 0560 T410-600B-TR T4 1060 T435-600B-TR T4 3560 DPAK 0.3 g T405-700B-TR T4 0570 2500 Tape and reel T435-700B-TR T4 3570 T405-800B-TR T4 0580 T410-800B-TR T4 1080 T435-800B-TR T4 3580 T405-600H T4 0560 T410-600H T4 1060 T435-600H T4 3560 IPAK 0.4 g 75 T405-800H T4 0580 T410-800H T4 1080 T435-800H T4 3580 Tube T405-600T T405-600T T410-600T T410-600T T435-600T T435-600T TO-220AB 2.3 g 50 T410-700T T410-700T T410-800T T410-800T T435-800T T435-800T DocID7699 Rev 9 13/15

Revision history T4 series 4 Revision history Table 12. Document revision history Date Revision Changes Jun-2003 2 Last updated. 25-Mar-2005 3 Layout updated, No content change. 25-Jan-2006 4 Markings changed in Table12. Updated DPAK and IPAK package information and reformatted to 14-May-2014 5 current standard. 11-Feb-2015 6 Updated package silhouettes in cover page. 1-Apr-2016 7 Removed ISOWATT-220AB package information. 05-Oct-2016 8 Updated Table3 and Table11. Updated Figure2 and Figure4. 14-Nov-2016 9 Updated Table1. 14/15 DocID7699 Rev 9

T4 series IMPORTANT NOTICE – PLEASE READ CAREFULLY STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, enhancements, modifications, and improvements to ST products and/or to this document at any time without notice. Purchasers should obtain the latest relevant information on ST products before placing orders. ST products are sold pursuant to ST’s terms and conditions of sale in place at the time of order acknowledgement. Purchasers are solely responsible for the choice, selection, and use of ST products and ST assumes no liability for application assistance or the design of Purchasers’ products. No license, express or implied, to any intellectual property right is granted by ST herein. Resale of ST products with provisions different from the information set forth herein shall void any warranty granted by ST for such product. ST and the ST logo are trademarks of ST. All other product or service names are the property of their respective owners. Information in this document supersedes and replaces information previously supplied in any prior versions of this document. © 2016 STMicroelectronics – All rights reserved DocID7699 Rev 9 15/15

Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: S TMicroelectronics: T435-800H T405-600B T410-800B T410-800H T410-600T T410-600B T410-600H T435-600B T435-600H T405- 600T T435-600T T405-600H T410-800B-TR T435-600B-TR T405-800B-TR T410-600B-TR T435-800T T410-800T T435-800W T405-600B-TR T410-600W T435-600W T405-700B-TR T435-700B-TR T435-800B-TR T410-700H T435-700H T410-700T