Tantalum Through-Hole Capacitors – Molded Axial T322 and T323 Series MIL–PRF–49137/1 and 5 (CX01 and CX05 Style) Overview The T322 and T323 (CX01 and CX05) capacitors are a These capacitors are available in working voltages of complete line of extended range molded solid tantalum 2, 4, 6, 10, 15, 20, 25, 35, and 50 volts. The operating capacitors designed specifically for high-speed automatic temperature ranges from -55°C to +85°C at full rated insertion applications. These capacitors offer an voltage and with 2/3 85°C rated voltage at 125°C. extremely high capacitance-to-volume ratio while still The gold-colored epoxy permits laser marking with maintaining excellent performance characteristics. outstanding permanency and legibility. T323 capacitors Supplied in six axial lead tubular case sizes, these are qualified under MIL-PRF-49137/1 and 5 as Military capacitors are idealy suited for use in printed wiring Style CX01 and CX05. boards and all applications requiring a high degree of packaging density. These capacitors can be supplied in bulk packaging or lead-taped on reels. The T322/ T323 capacitor dimensions and tight lead wire-to-body concentricity permit installation by the same automatic insertion equipment used for diodes and resistors. Benefits Applications • Taped and reeled per EIA Specification RS–296 Typical applications include decoupling, blocking, bypassing • Laser-marked case and filtering in commercial computers, data processing, • Qualified to MIL–PRF–49137/1 and 5 communications, and other electronic equipment. This (CX01 and CX05 Style) product is well-suited for decoupling required by high • Capacitance values of 0.1 to 330 μF speed computers due to its low ESR/impedance at high • Tolerances of ±5%, ±10% and ±20% frequencies. (M and K only tolerances available for T323 Series) • Voltage rating of 2 – 50 VDC • Operating temperature range of −55°C to +85°C • Case sizes: A, B, C, D, E, F One world. One KEMET © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2039_T322_AXIAL_T323 • 5/14/2019 1 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

Tantalum Through-Hole Capacitors – Molded Axial T322 and T323 Series MIL–PRF 49137/1 & 5 (CX01 and CX05 Style) Ordering Information T 32X A 105 M 035 A T Capacitor Case Capacitance Code Capacitance Rated Voltage Failure Rate/ Termination Series Packaging Class Size (pF) Tolerance (VDC) Military Product Finish T = Axial molded polar A First two digits J = ±5% 002 = 2 Not Applicable S = Standard Blank = Bulk Tantalum solid tantalum. B represent K = ±10% 004 = 4 (solder-coated 7200 = Reel Insert appropriate C significant M = ±20% 006 = 6 nickel) number to replace D figures. Third digit 010 = 10 T = 100% tin letter "X" = 322 E specifies number 015 = 15 (Sn)- plated or 323 (CX01 or F of zeros to follow. 020 = 20 CX05). 025 = 25 035 = 35 050 = 50 MIL–PRF–49137/1/5 (CX01 and CX05 Style) CX 05 D 475 K Rated Voltage Capacitance Capacitance Capacitor Class Series (VDC) Code (pF) Tolerance CX = MIL-PRF 01 = T322 D = 6 First two digits K = ±10% 05 = T323 F = 10 represent significant M = ±20% H = 15 figures. Third digit J = 20 specifies number of K = 25 zeros to follow. M = 35 N = 50 © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2039_T322_AXIAL_T323 • 5/14/2019 2 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

Tantalum Through-Hole Capacitors – Molded Axial T322 and T323 Series MIL–PRF 49137/1 & 5 (CX01 and CX05 Style) Performance Characteristics Item Performance Characteristics Operating Temperature −55°C to 125°C Rated Capacitance Range 0.1 – 330 μF at 120 Hz/25°C Capacitance Tolerance J Tolerance (5%), K Tolerance (10%), M Tolerance (20%) Rated Voltage Range 2 – 50 V DF (120 Hz at 25°C) Refer to Part Number Electrical Specification Table ESR and Impedance (100 kHz at 25°C) Refer to Part Number Electrical Specification Table (for reference only) Refer to Part Number Electrical Specification Table Leakage Current (rated voltage up to +85°C and 2/3 of rated voltage applied at 125°C) Dimensions – Inches (Millimeters) Metric will govern SIDE VIEW END VIEW 1.50±0.250 L 1.50±0.250 D (38.10±6.35) (38.10±6.35) W Case Size D Maximum L Maximum W A 0.095 (2.41) 0.260 (6.60) 0.020 (0.51) B 0.110 (2.79) 0.290 (7.37) 0.020 (0.51) C 0.180 (4.57) 0.345 (8.76) 0.020 (0.51) D 0.180 (4.57) 0.420 (10.67) 0.020 (0.51) E 0.280 (7.11) 0.530 (13.46) 0.025 (0.64) F 0.300 (7.62) 0.710 (18.03) 0.025 (0.64) © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2039_T322_AXIAL_T323 • 5/14/2019 3 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

Tantalum Through-Hole Capacitors – Molded Axial T322 and T323 Series MIL–PRF 49137/1 & 5 (CX01 and CX05 Style) Table 1 – Ratings & Part Number Reference Rated Rated Case Code/ KEMET Part DC CX01 & CX05 Capacitors per DF Voltage Cap Case Size Number Leakage MIL–PRF–49137/1 & 5 (See below for µA at 25°C % at 25°C (V) 85°C µF Military Part Number KEMET Part Number part options) Max/5 Minimum 120 Hz Maximum 2 6.8 A T322A685(1)002A(2) 0.5 10 2 8.2 A T322A825(1)002A(2) 0.5 10 2 10.0 A T322A106(1)002A(2) 0.5 10 2 12.0 B T322B126(1)002A(2) 0.5 10 2 15.0 B T322B156(1)002A(2) 0.5 10 2 18.0 B T322B186(1)002A(2) 0.5 10 2 22.0 B T322B226(1)002A(2) 0.5 10 2 27.0 B T322B276(1)002A(2) 0.5 10 2 33.0 B T322B336(1)002A(2) 0.5 10 2 39.0 C T322C396(1)002A(2) 0.6 10 2 47.0 C T322C476(1)002A(2) 0.8 10 2 56.0 C T322C566(1)002A(2) 0.9 10 2 68.0 C T322C686(1)002A(2) 1.1 10 4 4.7 A T322A475(1)004A(2) 0.5 8 4 5.6 A T322A565(1)004A(2) 0.5 8 4 6.8 A T322A685(1)002A(2) 0.5 8 4 8.2 B T322B825(1)004A(2) 0.5 8 4 10.0 B T322B106(1)004A(2) 0.5 8 4 12.0 B T322B126(1)004A(2) 0.5 8 4 15.0 B T322B156(1)004A(2) 0.5 8 4 18.0 B T322B186(1)004A(2) 0.6 8 4 22.0 B T322B226(1)004A(2) 0.7 8 4 27.0 C T322C276(1)004A(2) 0.9 8 4 33.0 C T322C336(1)004A(2) 1.1 8 4 39.0 C T322C396(1)004A(2) 1.2 8 4 47.0 C T322C476(1)004A(2) 1.5 8 4 56.0 D T322D566(1)004A(2) 1.8 8 4 68.0 D T322D686(1)004A(2) 2.2 8 6 3.3 A T322A335(1)006A(2) 0.5 4 6 3.9 A T322A395(1)006A(2) 0.5 4 6 4.7 A T322A475J006A(2) 0.5 4 6 4.7 A T322A475K006A(2) 0.5 4 CX05D475K T323A475K006A(2) 6 4.7 A T322A475M006A(2) 0.5 4 CX05D475M T323A475M006A(2) 6 5.6 B T322B565J006A(2) 0.5 4 6 5.6 B T322B565K006A(2) 0.5 4 CX01D565K T323B565K006A(2) 6 5.6 B T322B565M006A(2) 0.5 4 CX01D565M T323B565M006A(2) 6 6.8 B T322B685J006A(2) 0.5 6 6 6.8 B T322B685K006A(2) 0.5 6 CX01D685K T323B685K006A(2) 6 6.8 B T322B685M006A(2) 0.5 6 CX01D685M T323B685M006A(2) 6 8.2 B T322B825J006A(2) 0.5 6 6 8.2 B T322B825K006A(2) 0.5 6 CX01D825K T323B825K006A(2) 6 8.2 B T322B825M006A(2) 0.5 6 CX01D825M T323B825M006A(2) 6 10.0 B T322B106J006A(2) 0.5 6 6 10.0 B T322B106K006A(2) 0.5 6 CX01D106K T323B106K006A(2) 6 10.0 B T322B106M006A(2) 0.5 6 CX01D106M T323B106M006A(2) 6 12.0 B T322B126J006A(2) 0.6 6 6 12.0 B T322B126K006A(2) 0.6 6 CX01D126K T323B126K006A(2) 6 12.0 B T322B126M006A(2) 0.6 6 CX01D126M T323B126M006A(2) 6 15.0 B T322B156J006A(2) 0.7 6 6 15.0 B T322B156K006A(2) 0.7 6 CX05D156K T323B156K006A(2) 6 15.0 B T322B156M006A(2) 0.7 6 CX05D156M T323B156M006A(2) 6 18.0 C T322C186(1)006A(2) 0.9 6 6 22.0 C T322C226(1)006A(2) 1.1 6 6 27.0 C T322C276(1)006A(2) 1.3 6 6 33.0 C T322C336J006A(2) 1.5 6 6 33.0 C T322C336K006A(2) 1.5 6 CX05D336K T323C336K006A(2) (see below for µA at 25°C % at 25°C (V) 85°C µF Military Part Number KEMET Part Number part options) Max/5 Minimum 120 Hz Maximum Case Code/ Case Size DC CX01 & CX05 Capacitors per Rated Voltage Rated Cap KEMET Part Number DF Leakage MIL–PRF–49137/1 & 5 (1) To complete KEMET part number, insert M for ±20%, K for ±10% or J for 5%. Designates capacitance tolerance. (2) To complete KEMET part number, insert T = 100% Matte Tin (Sn) Plated, S = Standard Solder coated (SnPb 5% Pb minimum). Designates termination finish. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2039_T322_AXIAL_T323 • 5/14/2019 4 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

Tantalum Through-Hole Capacitors – Molded Axial T322 and T323 Series MIL–PRF 49137/1 & 5 (CX01 and CX05 Style) Table 1 – Ratings & Part Number Reference cont'd Rated Rated Case Code/ KEMET Part DC CX01 & CX05 Capacitors per DF Voltage Cap Case Size Number Leakage MIL–PRF–49137/1 & 5 (See below for µA at 25°C % at 25°C (V) 85°C µF Military Part Number KEMET Part Number part options) Max/5 Minimum 120 Hz Maximum 6 33.0 C T322C336M006A(2) 1.5 6 CX05D336M T323C336M006A(2) 6 39.0 D T322D396(1)006A(2) 1.9 6 6 47.0 D T322D476J006A(2) 2.3 6 6 47.0 D T322D476K006A(2) 2.3 6 CX05D476K T323D476K006A(2) 6 47.0 D T322D476M006A(2) 2.3 6 CX05D476M T323D476M006A(2) 6 56.0 D T322D566(1)006A(2) 2.7 6 6 68.0 D T322D686(1)006A(2) 3.3 6 6 82.0 E T322E826(1)006A(2) 3.9 8 6 100.0 E T322E107(1)006A(2) 4.8 8 6 120.0 E T322E127(1)006A(2) 5.0 8 6 150.0 E T322E157(1)006A(2) 5.0 8 6 180.0 E T322E187(1)006A(2) 8.6 8 6 220.0 E T322E227(1)006A(2) 10.0 8 6 270.0 F T322F277(1)006A(2) 10.0 8 6 330.0 F T322F337(1)006A(2) 10.0 8 10 2.2 A T322A225(1)010A(2) 0.5 4 10 2.7 A T322A275(1)010A(2) 0.5 4 10 3.3 A T322A335J010A(2) 0.5 4 10 3.3 A T322A335K010A(2) 0.5 4 CX05F335K T323A335K010A(2) 10 3.3 A T322A335M010A(2) 0.5 4 CX05F335M T323A335M010A(2) 10 3.9 B T322B395(1)010A(2) 0.5 4 10 4.7 B T322B475(1)010A(2) 0.5 4 10 5.6 B T322B565(1)010A(2) 0.5 4 10 6.8 B T322B685(1)010A(2) 0.5 6 10 8.2 B T322B825(1)010A(2) 0.7 6 10 10.0 B T322B106J010A(2) 0.8 6 10 10.0 B T322B106K010A(2) 0.8 6 CX05F106K T323B106K010A(2) 10 10.0 B T322B106M010A(2) 0.8 6 CX05F106M T323B106M010A(2) 10 12.0 C T322C126(1)010A(2) 1.0 6 10 15.0 C T322C156(1)010A(2) 1.2 6 10 18.0 C T322C186(1)010A(2) 1.4 6 10 22.0 C T322C226J010A(2) 1.5 6 10 22.0 C T322C226K010A(2) 1.5 6 CX05F226K T323C226K010A(2) 10 22.0 C T322C226M010A(2) 1.5 6 CX05F226M T323C226M010A(2) 10 27.0 D T322D276J010A(2) 2.2 6 10 27.0 D T322D276K010A(2) 2.2 6 CX05F276K T323D276K010A(2) 10 27.0 D T322D276M010A(2) 2.2 6 CX05F276M T323D276M010A(2) 10 33.0 D T322D336J010A(2) 2.6 6 10 33.0 D T322D336K010A(2) 2.6 6 CX05F336K T323D336K010A(2) 10 33.0 D T322D336M010A(2) 2.6 4 CX05F336M T323D336M010A(2) 10 39.0 D T322D396J010A(2) 3.1 6 10 39.0 D T322D396K010A(2) 3.1 6 CX05F396K T323D396K010A(2) 10 39.0 D T322D396M010A(2) 3.1 6 CX05F396M T323D396M010A(2) 10 47.0 D T322D476J010A(2) 3.8 6 10 47.0 D T322D476K010A(2) 3.8 6 CX05F476K T323D476K010A(2) 10 47.0 D T322D476M010A(2) 3.8 6 CX05F476M T323D476M010A(2) 10 56.0 E T322E566(1)010A(2) 4.4 6 10 68.0 E T322E686(1)010A(2) 5.0 6 10 82.0 E T322E826(1)010A(2) 5.0 8 10 100.0 E T322E107(1)010A(2) 8.0 8 10 120.0 E T322E127(1)010A(2) 9.6 8 10 150.0 E T322E157(1)010A(2) 10.0 8 10 180.0 F T322F187(1)010A(2) 10.0 8 10 220.0 F T322F227(1)010A(2) 10.0 8 15 1.5 A T322A155(1)015A(2) 0.5 4 15 1.8 A T322A185(1)015A(2) 0.5 4 (see below for µA at 25°C % at 25°C (V) 85°C µF Military Part Number KEMET Part Number part options) Max/5 Minimum 120 Hz Maximum Case Code/ Case Size DC CX01 & CX05 Capacitors per Rated Voltage Rated Cap KEMET Part Number DF Leakage MIL–PRF–49137/1 & 5 (1) To complete KEMET part number, insert M for ±20%, K for ±10% or J for 5%. Designates capacitance tolerance. (2) To complete KEMET part number, insert T = 100% Matte Tin (Sn) Plated, S = Standard Solder coated (SnPb 5% Pb minimum). Designates termination finish. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2039_T322_AXIAL_T323 • 5/14/2019 5 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

Tantalum Through-Hole Capacitors – Molded Axial T322 and T323 Series MIL–PRF 49137/1 & 5 (CX01 and CX05 Style) Table 1 – Ratings & Part Number Reference cont'd Rated Rated Case Code/ KEMET Part DC CX01 & CX05 Capacitors per DF Voltage Cap Case Size Number Leakage MIL–PRF–49137/1 & 5 (See below for µA at 25°C % at 25°C (V) 85°C µF Military Part Number KEMET Part Number part options) Max/5 Minimum 120 Hz Maximum 15 2.2 A T322A225J015A(2) 0.5 4 15 2.2 A T322A225K015A(2) 0.5 4 CX05H225K T323A225K015A(2) 15 2.2 A T322A225M015A(2) 0.5 4 CX05H225M T323A225M015A(2) 15 2.7 B T322B275(1)015A(2) 0.5 4 15 3.3 B T322B335(1)015A(2) 0.5 4 15 3.9 B T322B395(1)015A(2) 0.5 4 15 4.7 B T322B475(1)015A(2) 0.6 4 15 5.6 B T322B565(1)015A(2) 0.7 4 15 6.8 B T322B685J015A(2) 0.8 6 15 6.8 B T322B685K015A(2) 0.8 6 CX05H685K T323B685K015A(2) 15 6.8 B T322B685M015A(2) 0.8 6 CX05H685M T323B685M015A(2) 15 8.2 C T322C825(1)015A(2) 1.0 6 15 10.0 C T322C106(1)015A(2) 1.2 6 15 12.0 C T322C126(1)015A(2) 1.4 6 15 15.0 C T322C156J015A(2) 1.5 6 15 15.0 C T322C156K015A(2) 1.5 6 CX05H156K T323C156K015A(2) 15 15.0 C T322C156M015A(2) 1.5 6 CX05H156M T323C156M015A(2) 15 18.0 D T322D186(1)015A(2) 2.2 6 15 22.0 D T322D226J015A(2) 2.6 6 15 22.0 D T322D226K015A(2) 2.6 6 CX06H226K T323D226K015A(2) 15 22.0 D T322D226M015A(2) 2.6 6 CX06H226M T323D226M015A(2) 15 27.0 D T322D276(1)015A(2) 3.2 6 15 33.0 D T322D336J015A(2) 4.0 6 15 33.0 D T322D336K015A(2) 4.0 6 CX05H336K T323D336K015A(2) 15 33.0 D T322D336M015A(2) 4.0 6 CX05H336M T323D336M015A(2) 15 39.0 E T322E396(1)015A(2) 4.7 6 15 47.0 E T322E476(1)015A(2) 5.0 6 15 56.0 E T322E566(1)015A(2) 6.7 6 15 68.0 E T322E686(1)015A(2) 8.2 6 15 82.0 E T322E826(1)015A(2) 9.8 8 15 100.0 E T322E107(1)015A(2) 10.0 8 15 120.0 F T322F127(1)015A(2) 10.0 8 15 150.0 F T322F157(1)015A(2) 10.0 8 20 1.0 A T322A105(1)020A(2) 0.5 4 20 1.2 A T322A125(1)020A(2) 0.5 4 20 1.5 A T322A155J020A(2) 0.5 4 20 1.5 A T322A155K020A(2) 0.5 4 CX05J155K T323A155K020A(2) 20 1.5 A T322A155M020A(2) 0.5 4 CX05J155M T323A155M020A(2) 20 1.8 B T322B185(1)020A(2) 0.5 4 20 2.2 B T322B225(1)020A(2) 0.5 4 20 2.7 B T322B275(1)020A(2) 0.5 4 20 3.3 B T322B335(1)020A(2) 0.5 4 20 3.9 B T322B395(1)020A(2) 0.6 4 20 4.7 B T322B475J020A(2) 0.8 4 20 4.7 B T322B475K020A(2) 0.8 4 CX05J475K T323B475K020A(2) 20 4.7 B T322B475M020A(2) 0.8 4 CX05J475M T323B475M020A(2) 20 5.6 C T322C565(1)020A(2) 0.9 4 20 6.8 C T322C685(1)020A(2) 1.1 6 20 8.2 C T322C825(1)020A(2) 1.3 6 20 10.0 C T322C106(1)020A(2) 1.6 6 20 12.0 D T322D126J020A(2) 1.9 6 20 12.0 D T322D126K020A(2) 1.9 6 CX05J126K T323D126K020A(2) 20 12.0 D T322D126M020A(2) 1.9 6 CX05J126M T323D126M020A(2) 20 15.0 D T322D156J020A(2) 2.4 6 20 15.0 D T322D156K020A(2) 2.4 6 CX05J156K T323D156K020A(2) 20 15.0 D T322D156M020A(2) 2.4 6 CX05J156M T323D156M020A(2) (see below for µA at 25°C % at 25°C (V) 85°C µF Military Part Number KEMET Part Number part options) Max/5 Minimum 120 Hz Maximum Case Code/ Case Size DC CX01 & CX05 Capacitors per Rated Voltage Rated Cap KEMET Part Number DF Leakage MIL–PRF–49137/1 & 5 (1) To complete KEMET part number, insert M for ±20%, K for ±10% or J for 5%. Designates capacitance tolerance. (2) To complete KEMET part number, insert T = 100% Matte Tin (Sn) Plated, S = Standard Solder coated (SnPb 5% Pb minimum). Designates termination finish. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2039_T322_AXIAL_T323 • 5/14/2019 6 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

Tantalum Through-Hole Capacitors – Molded Axial T322 and T323 Series MIL–PRF 49137/1 & 5 (CX01 and CX05 Style) Table 1 – Ratings & Part Number Reference cont'd Rated Rated Case Code/ KEMET Part DC CX01 & CX05 Capacitors per DF Voltage Cap Case Size Number Leakage MIL–PRF–49137/1 & 5 (See below for µA at 25°C % at 25°C (V) 85°C µF Military Part Number KEMET Part Number part options) Max/5 Minimum 120 Hz Maximum 20 18.0 D T322D186(1)020A(2) 2.9 6 20 22.0 D T322D226(1)020A(2) 3.5 6 20 27.0 E T322E276(1)020A(2) 4.3 6 20 33.0 E T322E336(1)020A(2) 5.0 6 20 39.0 E T322E396(1)020A(2) 6.2 6 20 47.0 E T322E476(1)020A(2) 7.5 6 20 56.0 E T322E566(1)020A(2) 8.9 6 20 68.0 E T322E686(1)020A(2) 10.0 6 20 82.0 F T322F826(1)020A(2) 10.0 8 20 100.0 F T322F107(1)020A(2) 10.0 8 20 120.0 F T322F127(1)020A(2) 10.0 8 25 0.47 A T322A474(1)025A(2) 0.5 3 25 0.56 A T322A564(1)025A(2) 0.5 3 25 0.68 A T322A684(1)025A(2) 0.5 3 25 0.82 A T322A824(1)025A(2) 0.5 3 25 1.0 A T322A105J025A(2) 0.5 3 25 1.0 A T322A105K025A(2) 0.5 3 CX05K105K T323A105K025A(2) 25 1.0 A T322A105M025A(2) 0.5 3 CX05K105M T323A105M025A(2) 25 1.2 B T322B125(1)025A(2) 0.5 3 25 1.5 B T322B155J025A(2) 0.5 3 25 1.5 B T322B155K025A(2) 0.5 3 CX05K155K T323B155K025A(2) 25 1.5 B T322B155M025A(2) 0.5 3 CX05K155M T323B155M025A(2) 25 1.8 B T322B185J025A(2) 0.5 3 25 1.8 B T322B185K025A(2) 0.5 3 CX05K185K T323B185K025A(2) 25 1.8 B T322B185M025A(2) 0.5 3 CX05K185M T323B185M025A(2) 25 2.2 B T322B225J025A(2) 0.5 3 25 2.2 B T322B225K025A(2) 0.5 3 CK05K225K T323B225K025A(2) 25 2.2 B T322B225M025A(2) 0.5 3 CK05K225M T323B225M025A(2) 25 2.7 B T322B275(1)025A(2) 0.5 3 25 3.3 B T322B335J025A(2) 0.7 3 25 3.3 B T322B335K025A(2) 0.7 3 CX05K335K T323B335K025A(2) 25 3.3 B T322B335M025A(2) 0.7 3 CX05K335M T323B335M025A(2) 25 3.9 C T322C395(1)025A(2) 0.8 3 25 4.7 C T322C475(1)025A(2) 0.9 4 25 5.6 C T322C565(1)025A(2) 1.1 4 25 6.8 C T322C685J025A(2) 1.4 4 25 6.8 C T322C685K025A(2) 1.4 4 CX05K685K T323C685K025A(2) 25 6.8 C T322C685M025A(2) 1.4 4 CX05K685M T323C685M025A(2) 25 8.2 C T322C825(1)025A(2) 1.4 4 25 10.0 C T322C106J025A(2) 1.5 4 25 10.0 C T322C106K025A(2) 1.5 4 CX05K106K T323C106K025A(2) 25 10.0 C T322C106M025A(2) 1.5 4 CX05K106M T323C106M025A(2) 25 12.0 D T322D126(1)025A(2) 2.4 4 25 15.0 D T322D156(1)025A(2) 3.0 4 25 18.0 E T322E186(1)025A(2) 3.6 6 25 22.0 E T322E226(1)025A(2) 4.4 6 25 27.0 E T322E276(1)025A(2) 5.4 6 25 33.0 E T322E336(1)025A(2) 6.6 6 25 39.0 E T322E396(1)025A(2) 7.9 6 25 47.0 E T322E476(1)025A(2) 9.4 6 25 56.0 F T322F566(1)025A(2) 10.0 6 25 68.0 F T322F686(1)025A(2) 10.0 6 35 0.1 A T322A104(1)035A(2) 0.5 3 35 0.12 A T322A124(1)035A(2) 0.5 3 35 0.15 A T322A154(1)035A(2) 0.5 3 35 0.18 A T322A184(1)035A(2) 0.5 3 (see below for µA at 25°C % at 25°C (V) 85°C µF Military Part Number KEMET Part Number part options) Max/5 Minimum 120 Hz Maximum Case Code/ Case Size DC CX01 & CX05 Capacitors per Rated Voltage Rated Cap KEMET Part Number DF Leakage MIL–PRF–49137/1 & 5 (1) To complete KEMET part number, insert M for ±20%, K for ±10% or J for 5%. Designates capacitance tolerance. (2) To complete KEMET part number, insert T = 100% Matte Tin (Sn) Plated, S = Standard Solder coated (SnPb 5% Pb minimum). Designates termination finish. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2039_T322_AXIAL_T323 • 5/14/2019 7 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

Tantalum Through-Hole Capacitors – Molded Axial T322 and T323 Series MIL–PRF 49137/1 & 5 (CX01 and CX05 Style) Table 1 – Ratings & Part Number Reference cont'd Rated Rated Case Code/ KEMET Part DC CX01 & CX05 Capacitors per DF Voltage Cap Case Size Number Leakage MIL–PRF–49137/1 & 5 (See below for µA at 25°C % at 25°C (V) 85°C µF Military Part Number KEMET Part Number part options) Max/5 Minimum 120 Hz Maximum 35 0.22 A T322A224(1)035A(2) 0.5 3 35 0.27 A T322A274(1)035A(2) 0.5 3 35 0.33 A T322A334J035A(2) 0.5 3 35 0.33 A T322A334K035A(2) 0.5 3 CX05M334K T323A334K035A(2) 35 0.33 A T322A334M035A(2) 0.5 3 CX05M334M T323A334M035A(2) 35 0.39 A T322A394(1)035A(2) 0.5 3 35 0.47 A T322A474J035A(2) 0.5 3 35 0.47 A T322A474K035A(2) 0.5 3 CX05M474K T323A474K035A(2) 35 0.47 A T322A474M035A(2) 0.5 3 CX05M474K T323A474M035A(2) 35 0.56 B T322B564J035A(2) 0.5 3 35 0.56 B T322B564K035A(2) 0.5 3 CX01M564K T323B564K035A(2) 35 0.56 B T322B564M035A(2) 0.5 3 CX01M564M T323B564M035A(2) 35 0.68 B T322B684J035A(2) 0.5 3 35 0.68 B T322B684K035A(2) 0.5 3 CX01M684K T323B684K035A(2) 35 0.68 B T322B684M035A(2) 0.5 3 CX01M684M T323B684M035A(2) 35 0.82 B T322B824J035A(2) 0.5 3 35 0.82 B T322B824K035A(2) 0.5 3 CX01M824K T323B824K035A(2) 35 0.82 B T322B824M035A(2) 0.5 3 CX01M824M T323B824M035A(2) 35 1.0 B T322B105J035A(2) 0.5 3 35 1.0 B T322B105K035A(2) 0.5 3 CX01M105K T323B105K035A(2) 35 1.0 B T322B105K035A(2) 0.5 3 CX01M105M T323B105M035A(2) 35 1.2 B T322B125J035A(2) 0.5 3 35 1.2 B T322B125K035A(2) 0.5 3 CX01M125K T323B125K035A(2) 35 1.2 B T322B125M035A(2) 0.5 3 CX01M125M T323B125M035A(2) 35 1.5 B T322B155J035A(2) 0.5 3 35 1.5 B T322B155K035A(2) 0.5 3 CX05M155K T323B155K035A(2) 35 1.5 B T322B155M035A(2) 0.5 3 CX05M155M T323B155M035A(2) 35 1.8 C T322C185(1)035A(2) 0.5 3 35 2.2 C T322C225(1)035A(2) 0.6 3 35 2.7 C T322C275(1)035A(2) 0.8 3 35 3.3 C T322C335J035A(2) 0.9 4 35 3.3 C T322C335K035A(2) 0.9 4 CX05M335K T323C335K035A(2) 35 3.3 C T322C335M035A(2) 0.9 4 CX05M335M T323C335M035A(2) 35 3.9 C T322C395J035A(2) 1.1 4 35 3.9 C T322C395K035A(2) 1.1 4 CX05M395K T323C395K035A(2) 35 3.9 C T322C395M035A(2) 1.1 4 CX05M395M T323C395M035A(2) 35 4.7 C T322C475J035A(2) 1.3 4 35 4.7 C T322C475K035A(2) 1.3 4 CX05M475K T323C475K035A(2) 35 4.7 C T322C475M035A(2) 1.3 4 CX05M475M T323C475M035A(2) 35 5.6 D T322C565M035A(2) 1.6 4 35 6.8 D T322D685J035A(2) 1.9 4 35 6.8 D T322D685K035A(2) 1.9 4 CX05M685K T323D685K035A(2) 35 6.8 D T322D685M035A(2) 1.9 4 CX05M685M T323D685M035A(2) 35 8.2 D T322D825(1)035A(2) 2.3 4 35 10.0 D T322D106J035A(2) 2.8 4 35 10.0 D T322D106K035A(2) 2.8 4 CX05M106K T323D106K035A(2) 35 10.0 D T322D106M035A(2) 2.8 4 CX05M106M T323D106M035A(2) 35 12.0 E T322E126(1)035A(2) 3.3 4 35 15.0 E T322E156(1)035A(2) 4.2 6 35 18.0 E T322E186(1)035A(2) 5.0 6 35 22.0 E T322E226(1)035A(2) 6.2 6 35 27.0 E T322E276(1)035A(2) 7.5 6 35 33.0 E T322E336(1)035A(2) 9.2 6 35 39.0 F T322F396(1)035A(2) 10.0 6 35 47.0 F T322F476(1)035A(2) 10.0 6 50 0.1 A T322A104J050A(2) 0.5 3 (see below for µA at 25°C % at 25°C (V) 85°C µF Military Part Number KEMET Part Number part options) Max/5 Minimum 120 Hz Maximum Case Code/ Case Size DC CX01 & CX05 Capacitors per Rated Voltage Rated Cap KEMET Part Number DF Leakage MIL–PRF–49137/1 & 5 (1) To complete KEMET part number, insert M for ±20%, K for ±10% or J for 5%. Designates capacitance tolerance. (2) To complete KEMET part number, insert T = 100% Matte Tin (Sn) Plated, S = Standard Solder coated (SnPb 5% Pb minimum). Designates termination finish. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2039_T322_AXIAL_T323 • 5/14/2019 8 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

Tantalum Through-Hole Capacitors – Molded Axial T322 and T323 Series MIL–PRF 49137/1 & 5 (CX01 and CX05 Style) Table 1 – Ratings & Part Number Reference cont'd Rated Rated Case Code/ KEMET Part DC CX01 & CX05 Capacitors per DF Voltage Cap Case Size Number Leakage MIL–PRF–49137/1 & 5 (See below for µA at 25°C % at 25°C (V) 85°C µF Military Part Number KEMET Part Number part options) Max/5 Minimum 120 Hz Maximum 50 0.1 A T322A104K050A(2) 0.5 3 CX05N104K T323A104K050A(2) 50 0.1 A T322A104M050A(2) 0.5 3 CX05N104M T323A104M050A(2) 50 0.12 A T322A124(1)050A(2) 0.5 3 50 0.15 A T322A154J050A(2) 0.5 3 50 0.15 A T322A154K050A(2) 0.5 3 CX05N154K T323A154K050A(2) 50 0.15 A T322A154M050A(2) 0.5 3 CX05N154M T323A154M050A(2) 50 0.18 A T322A184(1)050A(2) 0.5 3 50 0.22 A T322A224J050A(2) 0.5 3 50 0.22 A T322A224K050A(2) 0.5 3 CX05N224K T323A224K050A(2) 50 0.22 A T322A224M050A(2) 0.5 3 CX05N224M T323A224M050A(2) 50 0.27 A T322A274(1)050A(2) 0.5 3 50 0.33 B T322B334J050A(2) 0.5 3 50 0.33 B T322B334K050A(2) 0.5 3 CX05N334K T323B334K050A(2) 50 0.33 B T322B334M050A(2) 0.5 3 CX05N334M T323B334M050A(2) 50 0.39 B T322B394J050A(2) 0.5 3 50 0.39 B T322B394K050A(2) 0.5 3 CX05N394K T323B394K050A(2) 50 0.39 B T322B394M050A(2) 0.5 3 CX05N394M T323B394M050A(2) 50 0.47 B T322B474J050A(2) 0.5 3 50 0.47 B T322B474K050A(2) 0.5 3 CX05N474K T323B474K050A(2) 50 0.47 B T322B474M050A(2) 0.5 3 CX05N474M T323B474M050A(2) 50 0.56 B T322B564(1)050A(2) 0.5 3 50 0.68 B T322B684J050A(2) 0.5 3 50 0.68 B T322B684K050A(2) 0.5 3 CX05N684K T323B684K050A(2) 50 0.68 B T322B684M050A(2) 0.5 3 CX05N684M T323B684M050A(2) 50 0.82 B T322B824(1)050A(2) 0.5 3 50 1.0 B T322B105J050A(2) 0.5 3 50 1.0 B T322B105K050A(2) 0.5 3 CX05N105K T323B105K050A(2) 50 1.0 B T322B105M050A(2) 0.5 3 CX05N105M T323B105M050A(2) 50 1.2 C T322C125(1)050A(2) 0.5 3 50 1.5 C T322C155J050A(2) 0.6 4 50 1.5 C T322C155K050A(2) 0.6 4 CX05N155K T323C155K050A(2) 50 1.5 C T322C155M050A(2) 0.6 4 CX05N155M T323C155M050A(2) 50 1.8 C T322C185(1)050A(2) 0.7 4 50 2.2 C T322C225J050A(2) 0.9 4 50 2.2 C T322C225K050A(2) 0.9 4 CX05N225K T323C225K050A(2) 50 2.2 C T322C225M050A(2) 0.9 4 CX05N225M T323C225M050A(2) 50 2.7 D T322D275(1)050A(2) 1.1 4 50 3.3 D T322D335J050A(2) 1.3 4 50 3.3 D T322D335K050A(2) 1.3 4 CX05N335K T323D335K050A(2) 50 3.3 D T322D335M050A(2) 1.3 4 CX05N335M T323D335M050A(2) 50 3.9 D T322D395(1)050A(2) 1.6 4 50 4.7 D T322D475J050A(2) 1.9 4 50 4.7 D T322D475K050A(2) 1.9 4 CX05N475K T323D475K050A(2) 50 4.7 D T322D475M050A(2) 1.9 4 CX05N475M T323D475M050A(2) 50 5.6 E T322E565(1)050A(2) 2.2 4 50 6.8 E T322E685(1)050A(2) 2.7 4 50 8.2 E T322E825(1)050A(2) 3.2 4 50 10.0 E T322E106(1)050A(2) 4.0 6 50 12.0 F T322F126(1)050A(2) 4.8 6 50 15.0 F T322F156(1)050A(2) 6.0 6 50 18.0 F T322F186(1)050A(2) 7.2 6 50 22.0 F T322F226(1)050A(2) 8.8 6 (see below for µA at 25°C % at 25°C (V) 85°C µF Military Part Number KEMET Part Number part options) Max/5 Minimum 120 Hz Maximum Case Code/ Case Size DC CX01 & CX05 Capacitors per Rated Voltage Rated Cap KEMET Part Number DF Leakage MIL–PRF–49137/1 & 5 (1) To complete KEMET part number, insert M for ±20%, K for ±10% or J for 5%. Designates capacitance tolerance. (2) To complete KEMET part number, insert T = 100% Matte Tin (Sn) Plated, S = Standard Solder coated (SnPb 5% Pb minimum). Designates termination finish. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2039_T322_AXIAL_T323 • 5/14/2019 9 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

Tantalum Through-Hole Capacitors – Molded Axial T322 and T323 Series MIL–PRF 49137/1 & 5 (CX01 and CX05 Style) Recommended Voltage Derating Guidelines −55°C to 85°C 85°C to 125°C 120% % Change in Working 100% DC Voltage with V 66% of V Temperature R R Voltage 80% % Changweit ihn twemorpkeinragt DurCe voltage g 60% 67% n ki Wor 40% % 20% 0% -55 25 45 85 105 125 Temperature (°C) Ripple Current/Ripple Voltage Permissible AC ripple voltage and current are related to Maximum Power Dissipation Case Size equivalent series resistance (ESR) and the power dissipation (Pmax) Watts at 25°C capabilities of the device. Permissible AC ripple voltage that A 0.060 may be applied is limited by following criteria: B 0.070 1. Dissipated power must not exceed the limits specified C 0.080 for the Series. D 0.090 2. The positive peak AC voltage plus the DC bias voltage, E 0.100 if any, must not exceed the DC voltage rating of the F 0.110 capacitor. Using the P max of the device, the maximum allowable rms 3. The negative peak AC voltage in combination with ripple current or voltage may be determined. bias voltage, if any, must not exceed the allowable limits specified for reverse voltage. I(max) = √P max/R E(max) = Z √P max/R Thermal capacities for the various case sizes have been I = rms ripple current (amperes) determined empirically and are listed below. The “ripple E = rms ripple voltage (volts) voltage” permissible may be calculated from the impedance P max = maximum power dissipation (watts) and ESR data shown in the respective product section. R = ESR at specified frequency (ohms) Z = Impedance at specified frequency (ohms) Temperature Compensation Multipliers for Maximum Power Dissipation T ≤ 25°C T ≤ 85°C T ≤ 125°C 1.00 0.90 0.40 T= Environmental Temperature The maximum power dissipation rating must be reduced with increasing environmental operating temperatures. Refer to the Temperature Compensation Multiplier table for details. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2039_T322_AXIAL_T323 • 5/14/2019 10 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

Tantalum Through-Hole Capacitors – Molded Axial T322 and T323 Series MIL–PRF 49137/1 & 5 (CX01 and CX05 Style) Optimum Solder Wave Profile Solder Wave Peak Temperature 260ºC Entrance to Solder Wave Exit from Solder Wave (Time in Wave – 2 to 4 Seconds) Flux Zone Preheat Zone Hot Air Debridging 250 Exit from 225 Solder Machine 200 80ºC Entrance to Cº to 120ºC In-Line Cleaner – 175 Free Exit from es 150 Entrance TBeomttpoemra Stiudree CAoiorl (Itnim-Lien ien C clleeaanneerr e to Solder Range may be less) gr 125 Machine e Immersion in D 100 Cleaning 150ºC Vapor 75 Maximum 50 Top Side Nominal 25 0 1 2 3 4 5 6 Time (Minutes) Reverse Voltage Although these are polar capacitors, some degree of transient voltage reversal is permissible, as seen below. The capacitors should not be operated continuously in reverse mode, even within these limits. Temperature (°C) Pecentage of Rated Voltage +25 15 +85 5 +125 1 Capacitor Marking Capacitance Code Tolerance Polarity KEMET Trademark Voltage Date Code (YY/WW) © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2039_T322_AXIAL_T323 • 5/14/2019 11 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

Tantalum Through-Hole Capacitors – Molded Axial T322 and T323 Series MIL–PRF 49137/1 & 5 (CX01 and CX05 Style) Storage Tantalum hermetically sealed capacitors should be stored in normal working environments. While the capacitors themselves are quite robust in other environments, solderability will be degraded by exposure to high temperatures, high humidity, corrosive atmospheres, and long term storage. In addition, packaging materials will be degraded by high temperature – reels may soften or warp and tape peel force may increase. KEMET recommends that maximum storage temperature not exceed 40°C and maximum storage humidity not exceed 60% relative humidity. Temperature fluctuations should be minimized to avoid condensation on the parts and atmospheres should be free of chlorine and sulphur bearing compounds. For optimized solderability capacitors stock should be used promptly, preferably within three years of receipt. Tape & Reel Packaging Information KEMET offers standard reeling of Solid Tantalum Capacitors for automatic insertion or lead forming machines per EIA Specification RS–296. Table 2 – Packaging Quantity Standard Bulk Standard Reel Ammo Pack Ammo Pack Case Size Reel C-Spec Quantity Quantity Quantity C-Spec A 300 4,500 2,000 C–7293 B 250 4,000 2,000 Class I C 100 2,500 1,000 C–7442 C–7200 D 100 2,500 1,000 Class II E 100 500 250 C–7443 F 100 500 250 Class III © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2039_T322_AXIAL_T323 • 5/14/2019 12 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

Tantalum Through-Hole Capacitors – Molded Axial T322 and T323 Series MIL–PRF 49137/1 & 5 (CX01 and CX05 Style) Figure 2 Figure 3 12" 0.059" to 0.315" White (+) Blue (−) (30.48cm) * Greater Than (Anode) (Cathode) Component Length 0.047" Maximum Hub (1.20) See Table 3 31/4" * "A" (82.6) 0.655"±0.010 Hole 1/8" 0.250" Nominal (15.9 ±0.25) (3.18) See Table 3 (6.35) "B" Table 3 – Tape Dimensions Dimensions in Inches (& Millimeters) A B BODY DIAMETER PITCH INSIDE TAPE SPACING ±0.020 (0.5) 2.063 (52.4) ≤ 0.197 (5.0) 0.200 (5.0) +0.079, −0.039 (+2.0, −1.0) 2.874 (73) 0.198 (5.0) to 0.394 (10.0) 0.400 or (10.0) +/0.059 Capacitors are reeled so that positive leads are oriented as shown in Figure 3. Kraft paper (50 lbs. test minimum) is inserted between the layers of capacitors wound on reels for component pitch ≤ 0.200" sizes and corrugated paper (70 lbs. test minimum), single faced is inserted for component pitch ≥ 0.400" sizes. Capacitor lead length may extend only a maximum of 0.031" (0.8 mm) beyond the tape’s edges. Capacitors are centered in a row between the two tapes and will deviate only ±0.031" (0.79 mm) from the row center. Figures 1 and 2 show the KEMET standard chipboard tape reel. A minimum of 36" (91.5 cm) leader tape is provided at each end of the reeled capacitors. Universal splicing clips are used to connect the tape. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2039_T322_AXIAL_T323 • 5/14/2019 13 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

Tantalum Through-Hole Capacitors – Molded Axial T322 and T323 Series MIL–PRF 49137/1 & 5 (CX01 and CX05 Style) KEMET Electronics Corporation Sales Offi ces For a complete list of our global sales offi ces, please visit www.kemet.com/sales. Disclaimer All product specifi cations, statements, information and data (collectively, the “Information”) in this datasheet are subject to change. The customer is responsible for checking and verifying the extent to which the Information contained in this publication is applicable to an order at the time the order is placed. All Information given herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied. Statements of suitability for certain applications are based on KEMET Electronics Corporation’s (“KEMET”) knowledge of typical operating conditions for such applications, but are not intended to constitute – and KEMET specifi cally disclaims – any warranty concerning suitability for a specifi c customer application or use. The Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by KEMET with reference to the use of KEMET’s products is given gratis, and KEMET assumes no obligation or liability for the advice given or results obtained. Although KEMET designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage. Although all product–related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicted or that other measures may not be required. KEMET is a registered trademark of KEMET Electronics Corporation. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2039_T322_AXIAL_T323 • 5/14/2019 14 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com