T Series Subminiature Toggle Switches Features/Benefits Typical Applications • Compact size—small footprint • Hand-held telecommunications • S ingle and double pole models • Instrumentation • P C and panel mount • Medical equipment options available • R oHS compliant models available Specifications Materials CONTACT RATING: B contact material: 0.4 VA max. @ 20 V AC or CASE: Glass filled nylon 6/6, flame retardant, heat stabilized or DC max. Q contact material (TX01 models): 3 AMPS @ diallyl phthalate (DAP), (UL 94V-0) or glass filled nylon 4/6, flame 120 V AC or 28 V DC. All other models: 2 AMPS @ retardant, heat stabilized. 120 V AC or 28 V DC. See page F-42 for additional ratings. ACTUATOR: Brass, chrome plated. ELECTRICAL LIFE: TX01 models: 60,000 make-and-break BUSHING: Brass, nickel plated. cycles at full load. All other models: 30,000 cycles. HOUSING: Stainless steel. CONTACT RESISTANCE: Below 20 m Ω typ. initial @ SWITCH SUPPORT: Brass, matte-tin plated. 2-4 V DC, 100 mA, for both silver and gold plated contacts. INSULATION RESISTANCE: 109 Ω min. END CONTACTS: B contact material: Copper alloy, with gold plate over nickel plate. Q contact material: Coin silver, silver plated. DIELECTRIC STRENGTH: 1000 Vrms min. @ sea level. See above for additional contact materials. OPERATING TEMPERATURE: –30ºC to 85ºC. CENTER CONTACTS & TERMINALS: B contact material: Copper alloy, SOLDERABILITY: Per MIL-STD-202F method 208D, or with gold plate over nickel plate. Q contact material: Copper alloy, EIA RS-186E method 9 (1 hour steam aging). silver plated. See page F-42 for additional contact materials. TERMINAL SEAL: Epoxy. NOTE: Any models supplied with P, R, Q, B or G contact material are RoHS compliant and compatible. HARDWARE: Nut & Locking Ring: Brass, nickel plated. Lockwasher: Steel, nickel plated. Additional hardware available NOTE: Specifications and materials listed above are for switches with standard options. separately, see Section N. For information on specific and custom switches, consult Customer Service Center. Build-A-Switch To order, simply select desired option from each category and place in the appropriate box. Available options are shown and described on pages F-38 thru F-42. For additional options not shown in catalog, consult Customer Service Center. All models have epoxy terminal seal and are compatible with all “bottom-wash” PCB cleaning methods. Switch Function T101 SPDT On-None-On T102 SPDT Off-None-On Actuator T103 SPDT On-Off-On P3 F latted, T105 SPDT Mom.-Off-Mom. anti-rotation, Bushing T107 SPDT On-Off-Mom. .490” high H .220” high, threaded, flat Terminations Seal T108 SPDT On-None-Mom. S .370” high H9 .220” high, unthreaded, flat A Right angle, PC thru-hole E Epoxy T201 DPDT On-None-On K Locking lever, round tip CF Splashproof, .310” high, threaded, flat AV V ertical right angle, T203 DPDT On-Off-On L1 .640” high D9 .260” high, unthreaded, keyway PC thru-hole T205 DPDT Mom.-Off-Mom. M1 .220” high T .310” high, threaded, flat C PC Thru-hole T207 DPDT On-Off-Mom. S1 .410” high T9 .310” high, unthreaded, flat V3 Vertical mount V-bracket T208 DPDT On-None-Mom. M .210” high TD .260” high, threaded, keyway Z Solder lug T211 DPDT On-On-On. L .290” high TK .310” high, threaded, keyway W Wire wrap Y .220” high, threaded, keyway Y9 .220” high, unthreaded, keyway Contact Material B Gold P Gold, matte tin Q Silver F G Gold over silver R Gold over silver, matte-tin T o g g l e Dimensions are shown: Inches (mm) Specifications and dimensions subject to change www.ckswitches.com F–37

T Series Subminiature Toggle Switches SWITCH FUNCTION SWITCH FUNCTION CONNECTED TERMINALS POS. 1 POS. 2 POS. 3 POS. 1 POS. 2 POS. 3 NO. MODEL POLES NO. C&K marking on opposite side C&K marking on opposite side SCHEMATIC T101 ON NONE ON 2-3 N/A 2-1 T103 ON OFF ON T105 MOM. OFF MOM. 2-3 OPEN 2-1 SP T107 ON OFF MOM. T108 ON NONE MOM. 2-3 NA 2-1 SPDT T102 OFF NONE ON OPEN N/A 3-1 SPST SPDT .338 (8,57) Part number shown: T101SHZQE SWITCH FUNCTION CONNECTED TERMINALS POS. 1 POS. 2 POS. 3 POS. 1 POS. 2 POS. 3 NO. MODEL POLES NO. C&K marking on opposite side C&K marking on opposite side SCHEMATIC T201 ON NONE ON 2-3,5-6 N/A 2-1,5-4 T203 ON OFF ON 2-3,5-6 OPEN 2-1,5-4 DP T205 MOM. OFF MOM. T208 ON NONE MOM. 2-3,5-6 N/A 2-1,5-4 T211* ON ON ON. 2-3,5-6 2-3,5-4 2-1,5-4 DPDT DPDT .338 (8,57) Terminal Nos. Part number shown: T201SHZQE For Reference Only F MOM. = Momentary e * Wiring for 3-way switch refer to page N-10 l g All models with all options when ordered with G, L, R or Q contact material. g o T Third Angle Projection DimensioDnism aernes isohnosw arne: sInhcohwens: I(Nmm(m) m) SpecSipfieccaitfiiocantsio annsd a nddim deimnseinosnios nssu sbujbecjetc tto t oc hchaannggee F–3G8–37 wwww.cwkwsw.itittccahnenso.cno.cmom

T Series Subminiature Toggle Switches ACTUATOR M  .210” HIGH S  .370” HIGH M1   .220” HIGH S1   .410” HIGH (with “T” bushing) (with “T” bushing) 1 2 1 2 .214 (5,44) Standard with A, AV or V3 terminations. Standard with Z, C or W terminations. L   L1   P3   .290” HIGH .640” HIGH ANTI-ROTATION, FLATTED, .450” HIGH 2 1 Actuator shown with standard H bushing. Subtract .040 (1,02) for TD and D9 bushings, subtract .090 (2,29) for T, T9, TK, K9 & 1 CF bushings. 2 Actuators shown with T, T9, TK & CF bushings, add .050 (1,27) for TD and D9 bushings, add .090 (2,29) for H, H9, Y & Y9 bushings. All actuators have chrome finish (except K). Available with T & T9 bushings only. Dress nut part number 709901201 supplied standard with threaded bushing. K   LOCKING LEVER Locking Positions –01 & –02 Models –03 & –11 Models –08 Models 2 Position lock 3 Position lock 1 Position lock K actuators have natural aluminum finish. Keyway on right side. To prevent accidental actuation, toggles must be lifted before being actuated. When released, toggles Not available with CF bushing option. again lock in place. Overtightening mounting nut may cause Bushing option code not required. Not available with TX05 & TX07 models. actuator to bind. BUSHING H   Y   T   .220” HIGH THREADED, FLAT .220” HIGH THREADED, KEYWAY .310” HIGH THREADED, FLAT H9   Y9   T9   .220” HIGH UNTHREADED, FLAT .220” HIGH UNTHREADED, KEYWAY .310” HIGH UNTHREADED, FLAT F T o g H standard with C, W & Z terminations. g H9 standard with A, AV & V3 terminations. l e Dimensions are shown: Inches (mm) Specifications and dimensions subject to change www.ckswitches.com F–39

T Series Subminiature Toggle Switches BUSHING TK   TD   CF   .310” HIGH THREADED, KEYWAY .260” HIGH THREADED, KEYWAY SPLASHPROOF, .310” HIGH THREADED, FLAT D9   .260” HIGH UNTHREADED, KEYWAY IP67 Degree of protection. Internal o-ring actuator seal and external bushing seal washer standard. Not available with K locking lever option. 10-48 BUSHING PANEL MOUNTING 1/4 IN. BUSHING With Standard Locking Ring Without Locking Ring Without Locking Ring Without Locking Ring Without Locking Ring With Small Locking Ring With Standard Locking Ring TERMINATIONS Z   C   SOLDER LUG PC THRU-HOLE SP DP SP DP PC MOUNTING Not available with P or R contact materials. T102 – omit center hole. W   WIRE WRAP SP DP F e l g g o T Dimensions are shown: Inches (mm) Specifications and dimensions subject to change www.ckswitches.com F–40

T Series Subminiature Toggle Switches TERMINATIONS A   RIGHT ANGLE, PC THRU-HOLE .214 PC MOUNTING (5,44) .022 (0,56) .128 (3,25) T101MH9ABE Horizontal Actuation Actuator Shown In Pos. 1 SPDT Not available with T102 model. A   RIGHT ANGLE, PC THRU-HOLE PC MOUNTING .214 (5,44) .022 (0,56) .128 (3,25) T201MH9ABE Horizontal Actuation Actuator Shown In Pos. 1 DPDT AV   VERTICAL RIGHT ANGLE, PC THRU-HOLE .214 PC MOUNTING (5,44) .026 (0,66) .153 (3,89) T101MH9AVBE Actuator Shown In Pos. 1 Vertical Actuation T102 Models: Omit terminal 2 SPDT NOTE: Terminal bend radii and lead-in manufacturing option. AV   VERTICAL RIGHT ANGLE, PC THRU-HOLE .214 PC MOUNTING (5,44) .022 (0,56) Actuator Shown In Pos. 1 .153 T201MH9AVBE (3,89) Vertical Actuation NOTE: Terminal bend radii and lead-in manufacturing option. DPDT V3   VERTICAL MOUNT, V-BRACKET PC MOUNTING .214 Actuator Shown (5,44) In Pos. 1 F .358 (9,08) T T101MH9V3BE o T102 Models: SPDT g Omit center hole. g T102 Models: l e Omit terminal 2 Dimensions are shown: Inches (mm) Specifications and dimensions subject to change www.ckswitches.com F–41

T Series Subminiature Toggle Switches TERMINATIONS V3   VERTICAL MOUNT, V-BRACKET .214 (5,44) PC MOUNTING T201MH9V3BE DPDT Actuator Shown In Pos. 1 CONTACT MATERIAL OPTION CONTACT TERMINAL CODE MATERIAL PLATING RATINGS B GOLD 1 GOLD 1 LOW LEVEL/ 0.4 VA MAX. @ 20 V AC OR DC MAX. P MATTE-TIN 6 DRY CIRCUIT Q SILVER 4,5 SILVER 5 POWER TAXL0L1 O MTHOEDRE LMSO: 3D EALMSP: S2 @AM 1P2S0 V@ A1C20 O VR A2C8 OV RD C28. V DC. G GOLD OVER GOLD 3 LOW LEVEL/DRY T3 XA0M1 PMSO @D E1L2S0: V0 .A4C V AO RM 2A8X V@ D 2C0. V AC OR DC MAX. OR R SILVER 2,3 MATTE-TIN 6 CIRCUIT OR POWER ALL OTHER MODELS: 0.4 VA MAX @ 20 V AC OR DC MAX. OR 2 AMPS @ 120 V AC OR 28 V DC. * Note: See Technical Data section of this catalog for RoHS compliant and compatible definitions and specifications. 1 CONTACTS & TERMINALS: Copper alloy, with gold plate over nickel plate. All models with all options when ordered with R, G, or Q contact material. 2 END CONTACTS: Coin silver, with gold plate over nickel plate. B contact material standard with A, AV, V3 & W terminations. 3 CENTER CONTACTS & ALL TERMINALS: Copper alloy, with gold plate Q contact material standard with C & Z terminations. over nickel plate. 4 END CONTACTS: Coin silver, silver plated. 5 CENTER CONTACT & ALL TERMINALS: Copper alloy, silver plated. 6 TERMINALS: Copper alloy, with matte-tin over nickel plate. SEAL E   EPOXY SEAL AVAILABLE HARDWARE 759D02000  SEALING BOOT .204 (5,2) F 6,7) 1 8 ( 5 e .6 l g g * Note: For use with S1 actuator style when combined with T, TK, and CF bushings. .524 (13,3) o 1/4-40 uns-2A nut T Dimensions are shown: Inches (mm) Specifications and dimensions subject to change www.ckswitches.com F–42

Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: C &K Switches: T101MH9V3BE T103SHV3QE T103SH9V3BE T101MHZQE T101STKCQE T201KZBE T103SHZQE T203SHZQE T103SHCQE T101KZQE T201MY9V3BE T201SHCQE T101MH9ABE T101MH9AVBE T101SHCQE T201MH9ABE T101SHZQE T201SHZQE T203S1TDZGE T102LHZQE T105SHZQE T107P3T9ALE T207SHZQE T207SHZBE T101MHZBE T201LHCGE T211STKCQE T101STDCBE T101LHZQE T101MH9AVQE T101S1H9V3BE T201MH9AQE T101L1H9CQE T101MHAVBE T103LTDZQE T103MY9CQE T105LHZQE T107MHZBE T208SH9AVBE T101L1Y9V3BE T101M1H9ABE T101M1HCBE T101M1TAVBE T101MHV3PE T101MY9CBE T101S1HABE T101S1T9ZBE T101S1TAGE T101S1TDZQE T101SCFABE T101SCFZBE T101SH9AGE T101SH9AVGE T101SH9AVQE T101SHCGE T101SHV3BE T101SYCQE T102M1HZBE T102MH9AVBE T102MHAVBE T102S1TZQE T102SHWBE T102SHWQE T103KAKE T103KCQE T103KZBE T103LTZQE T103M1H9AKE T103M1TAGE T103MHABE T103MHCRE T103MTAGE T103P3TAGE T103P3TCBE T103S1HAQE T103S1T9CQE T103S1T9V3QE T103S1TCQE T103S1YZBE T103SCFALE T103SH9ABE T103SH9CBE T103SHWQE T103STAGE T103STZQE T105L1HZBE T105M1H9AVBE T101KCBE T102P3T9V3PE T201S1TDZGE T101MYZBE T101KABE T101KAVBE T101KAVQE T101KCQE T101KV3BE T101KZBE T101L1TKZBE T101LCFAVBE T101LCFZBE